drm/bridge: lt9611: Consolidate detection logic
Subsystems (3)
PATCH 2/2 drm/bridge: lt9611: Use both bits for HDMI sensing
In reply to John StultzIn commit 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2).
However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0).
Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register.
--- drivers/gpu/drm/bridge/lontium-lt9611.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/lontium-lt9611.c +1 -1
@@ -584,7 +584,7 @@ static enum drm_connector_status __lt9611_detect(struct lt9611 *lt9611)int connected =0 ;regmap_read (lt9611->regmap,0x825e , ®_val); - connected = (reg_val &BIT (0 )); + connected = (reg_val & (BIT (2 ) |BIT (0 ))); lt9611->status = connected ? connector_status_connected : connector_status_disconnected;
Signature · 1 line
2.36.0.512.ge40c2bad7a-goog
PATCH 1/2 drm/bridge: lt9611: Consolidate detection logic
This patch simply consolidates the duplicated detection functionality in the driver.
--- drivers/gpu/drm/bridge/lontium-lt9611.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
drivers/gpu/drm/bridge/lontium-lt9611.c +8 -14
@@ -578,10 +578,8 @@ static struct lt9611_mode *lt9611_find_mode(const struct drm_display_mode *mode) }/* connector funcs */ -static enum drm_connector_status -lt9611_connector_detect (struct drm_connector *connector,bool force) +static enum drm_connector_status __lt9611_detect (struct lt9611 *lt9611) { -struct lt9611 *lt9611 =connector_to_lt9611 (connector);unsigned int reg_val =0 ;int connected =0 ;
@@ -594,6 +592,12 @@ lt9611_connector_detect(struct drm_connector *connector, bool force)return lt9611->status; } +static enum drm_connector_status +lt9611_connector_detect (struct drm_connector *connector,bool force) +{ +return __lt9611_detect (connector_to_lt9611 (connector)); +} +static int lt9611_read_edid (struct lt9611 *lt9611) {unsigned int temp;
@@ -887,17 +891,7 @@ static void lt9611_bridge_mode_set(struct drm_bridge *bridge,static enum drm_connector_status lt9611_bridge_detect (struct drm_bridge *bridge) { -struct lt9611 *lt9611 =bridge_to_lt9611 (bridge); -unsigned int reg_val =0 ; -int connected; - -regmap_read (lt9611->regmap,0x825e , ®_val); - connected = reg_val &BIT (0 ); - - lt9611->status = connected ? connector_status_connected : - connector_status_disconnected; - -return lt9611->status; +return __lt9611_detect (bridge_to_lt9611 (bridge)); } static struct edid *lt9611_bridge_get_edid(struct drm_bridge *bridge,
Signature · 1 line
2.36.0.512.ge40c2bad7a-goog
Re: [PATCH 2/2] drm/bridge: lt9611: Use both bits for HDMI sensing
In reply to John StultzQuoted 8 lines · John Stultz
In commit
19cf41b64e3b("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2).However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0).
I was waiting for a review or testing from a previous lt9611 committer, but seeing as how functionality is being re-introduced in this patch I think a code review is all that's needed.
Quoted 32 lines
Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register.
Cc Yongqin Liu <[email protected]>Cc Amit Pundir <[email protected]>Cc Peter Collingbourne <[email protected]>Cc Vinod Koul <[email protected]>Cc Bjorn Andersson <[email protected]>Cc Robert Foss <[email protected]>Fixes 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing")Signed-off-by John Stultz <[email protected]>--- drivers/gpu/drm/bridge/lontium-lt9611.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/bridge/lontium-lt9611.c +1
-2@@ -584,7 +584,7 @@ static enum drm_connector_status __lt9611_detect(struct lt9611 *lt9611)int connected =0 ;regmap_read (lt9611->regmap,0x825e , ®_val); - connected = (reg_val &BIT (0 )); + connected = (reg_val & (BIT (2 ) |BIT (0 ))); lt9611->status = connected ? connector_status_connected : connector_status_disconnected; --
Quoted 2 lines
2.36.0.512.ge40c2bad7a-goog
I reviewed this series and it looks good.
Applied to drm-misc-next.