Skip to contentSkip to conversation

ALSA: hda/intel: Add quirk for TongFang devices with pop noise

PATCH Superseded Werner Sembach 2 participants 5 messages May 11, 2022 – May 12, 2022 Sound

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hda/intel: Add quirk for TongFang devices with pop noise

When audio stops playing and sometimes when it starts playing, there is an audible "pop" noise when using headphones on most Tongfang GMxMxxx, GKxNxxx, GMxZxxx, GMxTxxx, and GMxAxxx devices.

Disabling power saving for the Realtek codec fixes this noise. Presumably it is triggered on some power event in the audio circuit.

---
 sound/pci/hda/hda_intel.c | 7 +++++++
 1 file changed, 7 insertions(+)
sound/pci/hda/hda_intel.c +7 -0
index 0a83eb6b88b1f..8a1088e057ec0 100644
@@ -2201,6 +2201,13 @@ static const struct snd_pci_quirk power_save_denylist[] = {
 	SND_PCI_QUIRK(0x17aa, 0x36a7, "Lenovo C50 All in one", 0),
 	/* https://bugs.launchpad.net/bugs/1821663 */
 	SND_PCI_QUIRK(0x1631, 0xe017, "Packard Bell NEC IMEDIA 5204", 0),
+	/* Several TongFang barebones making popping sounds */
+	SND_PCI_QUIRK(0x1d05, 0x1096, "TongFang GMxMxxx", 0),
+	SND_PCI_QUIRK(0x1d05, 0x1100, "TongFang GKxNxxx", 0),
+	SND_PCI_QUIRK(0x1d05, 0x1111, "TongFang GMxZxxx", 0),
+	SND_PCI_QUIRK(0x1d05, 0x1129, "TongFang GMxZxxx", 0),
+	SND_PCI_QUIRK(0x1d05, 0x1147, "TongFang GMxTxxx", 0),
+	SND_PCI_QUIRK(0x1d05, 0x121b, "TongFang GMxAxxx", 0),
 	{}
 };
 #endif /* CONFIG_PM */
Signature · 1 line
2.25.1
#1 lore raw
Quoted 10 lines · Werner Sembach

When audio stops playing and sometimes when it starts playing, there is an audible "pop" noise when using headphones on most Tongfang GMxMxxx, GKxNxxx, GMxZxxx, GMxTxxx, and GMxAxxx devices.

Disabling power saving for the Realtek codec fixes this noise. Presumably it is triggered on some power event in the audio circuit.

Usually this denylist is a last resort if any other methods never helped. Is it the case?

thanks,

Takashi

#2 lore raw

Am 11.05.22 um 15:41 schrieb Takashi Iwai:

Quoted 6 lines
Quoted 4 lines · Werner Sembach

When audio stops playing and sometimes when it starts playing, there is an audible "pop" noise when using headphones on most Tongfang GMxMxxx, GKxNxxx, GMxZxxx, GMxTxxx, and GMxAxxx devices.

Quoted 7 lines
Quoted 5 lines

Disabling power saving for the Realtek codec fixes this noise. Presumably it is triggered on some power event in the audio circuit.

Usually this denylist is a last resort if any other methods never helped. Is it the case?

I also tried setting codec->power_save_node = 0; in a patch_realtek.c quirk.

static void alc274_fixup_pop_noise(struct hda_codec *codec, const struct hda_fixup *fix, int action)
{
       codec->power_save_node = 0;
}

That initially seemed to work, but when I tested it again a day later after a fresh install, it didn't anymore. I don't know what is different. On the install before, I did some debugging with boot parameters and other stuff, cant reproduce anymore what exactly.

I took the line from alc274_fixup_bind_dacs which fixes the pop noise when applied to the devices, but does a lot of random other stuff too not meant for the device.

I think I only ever warm rebooted when trying other fixes including that one, maybe that's the reason for the different behavior a day later ..

Kind Regards,

Werner Sembach

Quoted 5 lines

thanks,

Takashi

#3 lore raw
Quoted 24 lines · Werner Sembach

Am 11.05.22 um 15:41 schrieb Takashi Iwai:

Quoted 6 lines
Quoted 4 lines · Werner Sembach

When audio stops playing and sometimes when it starts playing, there is an audible "pop" noise when using headphones on most Tongfang GMxMxxx, GKxNxxx, GMxZxxx, GMxTxxx, and GMxAxxx devices.

Quoted 7 lines
Quoted 5 lines

Disabling power saving for the Realtek codec fixes this noise. Presumably it is triggered on some power event in the audio circuit.

Usually this denylist is a last resort if any other methods never helped. Is it the case?

I also tried setting codec->power_save_node = 0; in a patch_realtek.c quirk.

static void alc274_fixup_pop_noise(struct hda_codec *codec, const struct hda_fixup *fix, int action)
{
       codec->power_save_node = 0;
}

Quoted 4 lines

That initially seemed to work, but when I tested it again a day later after a fresh install, it didn't anymore. I don't know what is different. On the install before, I did some debugging with boot parameters and other stuff, cant reproduce anymore what exactly.

power_save_node is already 0 as default for patch_alc269(), so it must be irrelevant.

Quoted 3 lines

I took the line from alc274_fixup_bind_dacs which fixes the pop noise when applied to the devices, but does a lot of random other stuff too not meant for the device.

It's only one thing, there are tons of different fixes :) alc274_fixup_bind_dacs() rather specifies the routing so that the speaker is connected to the preferred DAC.

Many click noises come from the default pin shut-up behavior. You can disable it or change it in other way. Also, setting auto_mute_via_amp may influence on such behavior (that is included in alc274_fixup_bind_dacs()).

Note that many quirks can be enabled even without compiling but via the codec patch loading (using hints).

thanks,

Takashi

#4 lore raw

Am 11.05.22 um 16:09 schrieb Takashi Iwai:

Quoted 43 lines
Quoted 22 lines · Werner Sembach

Am 11.05.22 um 15:41 schrieb Takashi Iwai:

Quoted 6 lines
Quoted 4 lines · Werner Sembach

When audio stops playing and sometimes when it starts playing, there is an audible "pop" noise when using headphones on most Tongfang GMxMxxx, GKxNxxx, GMxZxxx, GMxTxxx, and GMxAxxx devices.

Quoted 7 lines
Quoted 5 lines

Disabling power saving for the Realtek codec fixes this noise. Presumably it is triggered on some power event in the audio circuit.

Usually this denylist is a last resort if any other methods never helped. Is it the case?

I also tried setting codec->power_save_node = 0; in a patch_realtek.c quirk.

static void alc274_fixup_pop_noise(struct hda_codec *codec, const struct hda_fixup *fix, int action)
{
       codec->power_save_node = 0;
}

Quoted 4 lines

That initially seemed to work, but when I tested it again a day later after a fresh install, it didn't anymore. I don't know what is different. On the install before, I did some debugging with boot parameters and other stuff, cant reproduce anymore what exactly.

power_save_node is already 0 as default for patch_alc269(), so it must be irrelevant.

Quoted 3 lines

I took the line from alc274_fixup_bind_dacs which fixes the pop noise when applied to the devices, but does a lot of random other stuff too not meant for the device.

It's only one thing, there are tons of different fixes :) alc274_fixup_bind_dacs() rather specifies the routing so that the speaker is connected to the preferred DAC.

Many click noises come from the default pin shut-up behavior. You can disable it or change it in other way. Also, setting auto_mute_via_amp may influence on such behavior (that is included in alc274_fixup_bind_dacs()).

Quoted 7 lines

Note that many quirks can be enabled even without compiling but via the codec patch loading (using hints).

thanks,

Takashi

Found a quirk in patch_realtek.c with the same effect as the power_save=0 and 2 more affected subsystem ids. Patch send as v2.

Kind Regards,

Werner