kvm: s390: Add PV dump support
Subsystems (4)
Janosch Frank
maintainerv5 cover kvm: s390: Add PV dump support
Sometimes dumping inside of a VM fails, is unavailable or doesn't yield the required data. For these occasions we dump the VM from the outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the guest through dumpers like KDUMP. A PV guest can be dumped from the hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the Ultravisor who safeguards the VM state. New UV calls have been added to initialize the dump, dump storage state data, dump cpu data and complete the dump process.
I chose not to document the dump data provided by the Ultravisor since KVM doesn't interprete it in any way. We're currently searching for a location and enough cycles to make it available to all.
v5:
* v4 went out without a version
* Fixed spelling mistake in query
* Improved the storage state dump code
* Switched to the scheduling uv call for all dump commands
* Fixed the documentation formatting
* Moved the capability into its own patch it shouldn't be part of patch #6
v4:
* Rebased and fixed up conflicts due to the Documentation changes and new KVM capabilities
* Fixed the dump facility check, now we check for all 4 calls
v3:
* Added Rev-by
* Renamed the query function's len variables to len_min
v2:
* Added vcpu SIE blocking to avoid validities
* Moved the KVM CAP to patch #7
* Renamed len to len_max and introduced len_written for extendability
* Added Rev-bys
Janosch Frank (10):
s390x: Add SE hdr query information
s390: uv: Add dump fields to query
KVM: s390: pv: Add query interface
KVM: s390: pv: Add dump support definitions
KVM: s390: pv: Add query dump information
kvm: s390: Add configuration dump functionality
kvm: s390: Add CPU dump functionality
kvm: s390: Add KVM_CAP_S390_PROTECTED_DUMP
Documentation: virt: Protected virtual machine dumps Documentation/virt/kvm/api.rst: Add protvirt dump/info api
descriptions
Documentation/virt/kvm/api.rst | 153 +++++++++- Documentation/virt/kvm/s390/index.rst | 1 + Documentation/virt/kvm/s390/s390-pv-dump.rst | 64 ++++ arch/s390/boot/uv.c | 4 + arch/s390/include/asm/kvm_host.h | 1 + arch/s390/include/asm/uv.h | 45 ++- arch/s390/kernel/uv.c | 53 ++++ arch/s390/kvm/kvm-s390.c | 306 +++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 3 + arch/s390/kvm/pv.c | 129 ++++++++ include/uapi/linux/kvm.h | 55 ++++ 11 files changed, 811 insertions(+), 3 deletions(-) create mode 100644 Documentation/virt/kvm/s390/s390-pv-dump.rst
Signature · 1 line
2.34.1
Janosch Frank
maintainerPATCH v5 1/10 s390x: Add SE hdr query information
We have information about the supported se header version and pcf bits so let's expose it via the sysfs files.
--- arch/s390/boot/uv.c | 2 ++ arch/s390/include/asm/uv.h | 7 ++++++- arch/s390/kernel/uv.c | 20 ++++++++++++++++++++ 3 files changed, 28 insertions(+), 1 deletion(-)
arch/s390/boot/uv.c +2 -0
@@ -41,6 +41,8 @@ void uv_query_info(void) uv_info.max_num_sec_conf = uvcb.max_num_sec_conf; uv_info.max_guest_cpu_id = uvcb.max_guest_cpu_id; uv_info.uv_feature_indications = uvcb.uv_feature_indications; + uv_info.supp_se_hdr_ver = uvcb.supp_se_hdr_versions; + uv_info.supp_se_hdr_pcf = uvcb.supp_se_hdr_pcf; }#ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
arch/s390/include/asm/uv.h +6 -1
@@ -110,7 +110,10 @@ struct uv_cb_qui {u8 reserved88[158 -136 ];/* 0x0088 */ u16 max_guest_cpu_id;/* 0x009e */ u64 uv_feature_indications;/* 0x00a0 */ -u8 reserveda8[200 -168 ];/* 0x00a8 */ +u64 reserveda8;/* 0x00a8 */ +u64 supp_se_hdr_versions;/* 0x00b0 */ +u64 supp_se_hdr_pcf;/* 0x00b8 */ +u64 reservedc0;/* 0x00c0 */ } __packed__aligned(8) ;/* Initialize Ultravisor */
@@ -307,6 +310,8 @@ struct uv_info {unsigned int max_num_sec_conf;unsigned short max_guest_cpu_id;unsigned long uv_feature_indications; +unsigned long supp_se_hdr_ver; +unsigned long supp_se_hdr_pcf; };extern struct uv_info uv_info;
arch/s390/kernel/uv.c +20 -0
@@ -392,6 +392,24 @@ static ssize_t uv_query_facilities(struct kobject *kobj,static struct kobj_attribute uv_query_facilities_attr =__ATTR (facilities,0444 , uv_query_facilities,NULL ); +static ssize_t uv_query_supp_se_hdr_ver (struct kobject *kobj, +struct kobj_attribute *attr,char *buf) +{ +return sysfs_emit (buf,"%lx\n" , uv_info.supp_se_hdr_ver); +} + +static struct kobj_attribute uv_query_supp_se_hdr_ver_attr = +__ATTR (supp_se_hdr_ver,0444 , uv_query_supp_se_hdr_ver,NULL ); + +static ssize_t uv_query_supp_se_hdr_pcf (struct kobject *kobj, +struct kobj_attribute *attr,char *buf) +{ +return sysfs_emit (buf,"%lx\n" , uv_info.supp_se_hdr_pcf); +} + +static struct kobj_attribute uv_query_supp_se_hdr_pcf_attr = +__ATTR (supp_se_hdr_pcf,0444 , uv_query_supp_se_hdr_pcf,NULL ); +static ssize_t uv_query_feature_indications (struct kobject *kobj,struct kobj_attribute *attr,char *buf) {
@@ -437,6 +455,8 @@ static struct attribute *uv_query_attrs[] = { &uv_query_max_guest_cpus_attr.attr, &uv_query_max_guest_vms_attr.attr, &uv_query_max_guest_addr_attr.attr, + &uv_query_supp_se_hdr_ver_attr.attr, + &uv_query_supp_se_hdr_pcf_attr.attr, NULL, };
Signature · 1 line
2.34.1
Re: [PATCH v5 01/10] s390x: Add SE hdr query information
Quoted 5 lines · Janosch Frank
We have information about the supported se header version and pcf bits so let's expose it via the sysfs files.
Signed-off-by Janosch Frank <[email protected]>Reviewed-by Claudio Imbrenda <[email protected]>
Janosch Frank
maintainerPATCH v5 2/10 s390: uv: Add dump fields to query
In reply to Janosch FrankThe new dump feature requires us to know how much memory is needed for the "dump storage state" and "dump finalize" ultravisor call. These values are reported via the UV query call.
--- arch/s390/boot/uv.c | 2 ++ arch/s390/include/asm/uv.h | 5 +++++ arch/s390/kernel/uv.c | 33 +++++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+)
arch/s390/boot/uv.c +2 -0
@@ -43,6 +43,8 @@ void uv_query_info(void) uv_info.uv_feature_indications = uvcb.uv_feature_indications; uv_info.supp_se_hdr_ver = uvcb.supp_se_hdr_versions; uv_info.supp_se_hdr_pcf = uvcb.supp_se_hdr_pcf; + uv_info.conf_dump_storage_state_len = uvcb.conf_dump_storage_state_len; + uv_info.conf_dump_finalize_len = uvcb.conf_dump_finalize_len; }#ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
arch/s390/include/asm/uv.h +5 -0
@@ -114,6 +114,9 @@ struct uv_cb_qui {u64 supp_se_hdr_versions;/* 0x00b0 */ u64 supp_se_hdr_pcf;/* 0x00b8 */ u64 reservedc0;/* 0x00c0 */ +u64 conf_dump_storage_state_len;/* 0x00c8 */ +u64 conf_dump_finalize_len;/* 0x00d0 */ +u8 reservedd8[256 -216 ];/* 0x00d8 */ } __packed__aligned(8) ;/* Initialize Ultravisor */
@@ -312,6 +315,8 @@ struct uv_info {unsigned long uv_feature_indications;unsigned long supp_se_hdr_ver;unsigned long supp_se_hdr_pcf; +unsigned long conf_dump_storage_state_len; +unsigned long conf_dump_finalize_len; };extern struct uv_info uv_info;
arch/s390/kernel/uv.c +33 -0
@@ -410,6 +410,36 @@ static ssize_t uv_query_supp_se_hdr_pcf(struct kobject *kobj,static struct kobj_attribute uv_query_supp_se_hdr_pcf_attr =__ATTR (supp_se_hdr_pcf,0444 , uv_query_supp_se_hdr_pcf,NULL ); +static ssize_t uv_query_dump_cpu_len (struct kobject *kobj, +struct kobj_attribute *attr,char *page) +{ +return scnprintf (page,PAGE_SIZE ,"%lx\n" , + uv_info.guest_cpu_stor_len); +} + +static struct kobj_attribute uv_query_dump_cpu_len_attr = +__ATTR (uv_query_dump_cpu_len,0444 , uv_query_dump_cpu_len,NULL ); + +static ssize_t uv_query_dump_storage_state_len (struct kobject *kobj, +struct kobj_attribute *attr,char *page) +{ +return scnprintf (page,PAGE_SIZE ,"%lx\n" , + uv_info.conf_dump_storage_state_len); +} + +static struct kobj_attribute uv_query_dump_storage_state_len_attr = +__ATTR (dump_storage_state_len,0444 , uv_query_dump_storage_state_len,NULL ); + +static ssize_t uv_query_dump_finalize_len (struct kobject *kobj, +struct kobj_attribute *attr,char *page) +{ +return scnprintf (page,PAGE_SIZE ,"%lx\n" , + uv_info.conf_dump_finalize_len); +} + +static struct kobj_attribute uv_query_dump_finalize_len_attr = +__ATTR (dump_finalize_len,0444 , uv_query_dump_finalize_len,NULL ); +static ssize_t uv_query_feature_indications (struct kobject *kobj,struct kobj_attribute *attr,char *buf) {
@@ -457,6 +487,9 @@ static struct attribute *uv_query_attrs[] = { &uv_query_max_guest_addr_attr.attr, &uv_query_supp_se_hdr_ver_attr.attr, &uv_query_supp_se_hdr_pcf_attr.attr, + &uv_query_dump_storage_state_len_attr.attr, + &uv_query_dump_finalize_len_attr.attr, + &uv_query_dump_cpu_len_attr.attr, NULL, };
Signature · 1 line
2.34.1
Re: [PATCH v5 02/10] s390: uv: Add dump fields to query
Quoted 6 lines · Janosch Frank
The new dump feature requires us to know how much memory is needed for the "dump storage state" and "dump finalize" ultravisor call. These values are reported via the UV query call.
Signed-off-by Janosch Frank<[email protected]>Reviewed-by Claudio Imbrenda<[email protected]>
Janosch Frank
maintainerPATCH v5 3/10 KVM: s390: pv: Add query interface
In reply to Janosch FrankSome of the query information is already available via sysfs but having a IOCTL makes the information easier to retrieve.
--- arch/s390/kvm/kvm-s390.c | 76 ++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 25 +++++++++++++ 2 files changed, 101 insertions(+)
arch/s390/kvm/kvm-s390.c +76 -0
@@ -2224,6 +2224,42 @@ static int kvm_s390_cpus_to_pv(struct kvm *kvm, u16 *rc, u16 *rrc)return r; } +/* +* Here we provide user space with a direct interface to query UV +* related data like UV maxima and available features as well as +* feature specific data. +* +* To facilitate future extension of the data structures we'll try to +* write data up to the maximum requested length. +*/ +static ssize_t kvm_s390_handle_pv_info (struct kvm_s390_pv_info *info) +{ +ssize_t len_min; + +switch (info->header.id) { +case KVM_PV_INFO_VM : { + len_min =sizeof (info->header) +sizeof (info->vm); + +if (info->header.len_max < len_min) +return -EINVAL ; + +memcpy (info->vm.inst_calls_list, + uv_info.inst_calls_list, +sizeof (uv_info.inst_calls_list)); + +/* It's max cpuid not max cpus, so it's off by one */ + info->vm.max_cpus = uv_info.max_guest_cpu_id +1 ; + info->vm.max_guests = uv_info.max_num_sec_conf; + info->vm.max_guest_addr = uv_info.max_sec_stor_addr; + info->vm.feature_indication = uv_info.uv_feature_indications; + +return len_min; + } +default : +return -EINVAL ; + } +} +static int kvm_s390_handle_pv (struct kvm *kvm,struct kvm_pv_cmd *cmd) {int r =0 ;
@@ -2360,6 +2396,46 @@ static int kvm_s390_handle_pv(struct kvm *kvm, struct kvm_pv_cmd *cmd) cmd->rc, cmd->rrc);break ; } +case KVM_PV_INFO : { +struct kvm_s390_pv_info info = {}; +ssize_t data_len; + +/* +* No need to check the VM protection here. +* +* Maybe user space wants to query some of the data +* when the VM is still unprotected. If we see the +* need to fence a new data command we can still +* return an error in the info handler. +*/ + + r = -EFAULT ; +if (copy_from_user (&info, argp,sizeof (info.header))) +break ; + + r = -EINVAL ; +if (info.header.len_max <sizeof (info.header)) +break ; + + data_len =kvm_s390_handle_pv_info (&info); +if (data_len <0 ) { + r = data_len; +break ; + } +/* +* If a data command struct is extended (multiple +* times) this can be used to determine how much of it +* is valid. +*/ + info.header.len_written = data_len; + + r = -EFAULT ; +if (copy_to_user (argp, &info, data_len)) +break ; + + r =0 ; +break ; + }default : r = -ENOTTY ; }
include/uapi/linux/kvm.h +25 -0
@@ -1653,6 +1653,30 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_info_id { +KVM_PV_INFO_VM , +}; + +struct kvm_s390_pv_info_vm { +__u64 inst_calls_list[4 ]; +__u64 max_cpus; +__u64 max_guests; +__u64 max_guest_addr; +__u64 feature_indication; +}; + +struct kvm_s390_pv_info_header { +__u32 id; +__u32 len_max; +__u32 len_written; +__u32 reserved; +}; + +struct kvm_s390_pv_info { +struct kvm_s390_pv_info_header header; +struct kvm_s390_pv_info_vm vm; +}; +enum pv_cmd_id {KVM_PV_ENABLE ,KVM_PV_DISABLE ,
@@ -1661,6 +1685,7 @@ enum pv_cmd_id {KVM_PV_VERIFY ,KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL , + KVM_PV_INFO, }; struct kvm_pv_cmd {
Signature · 1 line
2.34.1
Re: [PATCH v5 03/10] KVM: s390: pv: Add query interface
Quoted 4 lines · On Mon, 16 May 2022 09:08:10 +0000 Janosch Frank <[email protected]> wrote:
Some of the query information is already available via sysfs but having a IOCTL makes the information easier to retrieve.
Signed-off-by Janosch Frank <[email protected]>
Quoted 142 lines
--- arch/s390/kvm/kvm-s390.c | 76 ++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 25 +++++++++++++ 2 files changed, 101 insertions(+)arch/s390/kvm/kvm-s390.c +76
-0@@ -2224,6 +2224,42 @@ static int kvm_s390_cpus_to_pv(struct kvm *kvm, u16 *rc, u16 *rrc)return r; } +/* +* Here we provide user space with a direct interface to query UV +* related data like UV maxima and available features as well as +* feature specific data. +* +* To facilitate future extension of the data structures we'll try to +* write data up to the maximum requested length. +*/ +static ssize_t kvm_s390_handle_pv_info (struct kvm_s390_pv_info *info) +{ +ssize_t len_min; + +switch (info->header.id) { +case KVM_PV_INFO_VM : { + len_min =sizeof (info->header) +sizeof (info->vm); + +if (info->header.len_max < len_min) +return -EINVAL ; + +memcpy (info->vm.inst_calls_list, + uv_info.inst_calls_list, +sizeof (uv_info.inst_calls_list)); + +/* It's max cpuid not max cpus, so it's off by one */ + info->vm.max_cpus = uv_info.max_guest_cpu_id +1 ; + info->vm.max_guests = uv_info.max_num_sec_conf; + info->vm.max_guest_addr = uv_info.max_sec_stor_addr; + info->vm.feature_indication = uv_info.uv_feature_indications; + +return len_min; + } +default : +return -EINVAL ; + } +} +static int kvm_s390_handle_pv (struct kvm *kvm,struct kvm_pv_cmd *cmd) {int r =0 ;@@ -2360,6 +2396,46 @@ static int kvm_s390_handle_pv(struct kvm *kvm, struct kvm_pv_cmd *cmd) cmd->rc, cmd->rrc);break ; } +case KVM_PV_INFO : { +struct kvm_s390_pv_info info = {}; +ssize_t data_len; + +/* +* No need to check the VM protection here. +* +* Maybe user space wants to query some of the data +* when the VM is still unprotected. If we see the +* need to fence a new data command we can still +* return an error in the info handler. +*/ + + r = -EFAULT ; +if (copy_from_user (&info, argp,sizeof (info.header))) +break ; + + r = -EINVAL ; +if (info.header.len_max <sizeof (info.header)) +break ; + + data_len =kvm_s390_handle_pv_info (&info); +if (data_len <0 ) { + r = data_len; +break ; + } +/* +* If a data command struct is extended (multiple +* times) this can be used to determine how much of it +* is valid. +*/ + info.header.len_written = data_len; + + r = -EFAULT ; +if (copy_to_user (argp, &info, data_len)) +break ; + + r =0 ; +break ; + }default : r = -ENOTTY ; }include/uapi/linux/kvm.h +25
-0@@ -1653,6 +1653,30 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_info_id { +KVM_PV_INFO_VM , +}; + +struct kvm_s390_pv_info_vm { +__u64 inst_calls_list[4 ]; +__u64 max_cpus; +__u64 max_guests; +__u64 max_guest_addr; +__u64 feature_indication; +}; + +struct kvm_s390_pv_info_header { +__u32 id; +__u32 len_max; +__u32 len_written; +__u32 reserved; +}; + +struct kvm_s390_pv_info { +struct kvm_s390_pv_info_header header; +struct kvm_s390_pv_info_vm vm; +}; +enum pv_cmd_id {KVM_PV_ENABLE ,KVM_PV_DISABLE ,@@ -1661,6 +1685,7 @@ enum pv_cmd_id {KVM_PV_VERIFY ,KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL , + KVM_PV_INFO, }; struct kvm_pv_cmd {
Re: [PATCH v5 03/10] KVM: s390: pv: Add query interface
In reply to Janosch FrankQuoted 4 lines · Janosch Frank
Some of the query information is already available via sysfs but having a IOCTL makes the information easier to retrieve.
Signed-off-by Janosch Frank<[email protected]>
Janosch Frank
maintainerPATCH v5 4/10 KVM: s390: pv: Add dump support definitions
In reply to Janosch FrankLet's add the constants and structure definitions needed for the dump support.
--- arch/s390/include/asm/uv.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
arch/s390/include/asm/uv.h +33 -0
@@ -50,6 +50,10 @@#define UVC_CMD_SET_UNSHARE_ALL 0x0340#define UVC_CMD_PIN_PAGE_SHARED 0x0341#define UVC_CMD_UNPIN_PAGE_SHARED 0x0342 +#define UVC_CMD_DUMP_INIT 0x0400 +#define UVC_CMD_DUMP_CONF_STOR_STATE 0x0401 +#define UVC_CMD_DUMP_CPU 0x0402 +#define UVC_CMD_DUMP_COMPLETE 0x0403#define UVC_CMD_SET_SHARED_ACCESS 0x1000#define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001#define UVC_CMD_RETR_ATTEST 0x1020
@@ -77,6 +81,10 @@ enum uv_cmds_inst {BIT_UVC_CMD_UNSHARE_ALL =20 ,BIT_UVC_CMD_PIN_PAGE_SHARED =21 ,BIT_UVC_CMD_UNPIN_PAGE_SHARED =22 , +BIT_UVC_CMD_DUMP_INIT =24 , +BIT_UVC_CMD_DUMP_CONFIG_STOR_STATE =25 , +BIT_UVC_CMD_DUMP_CPU =26 , +BIT_UVC_CMD_DUMP_COMPLETE =27 , BIT_UVC_CMD_RETR_ATTEST = 28, };
@@ -246,6 +254,31 @@ struct uv_cb_attest {u64 reserved168[4 ];/* 0x0168 */ } __packed__aligned(8) ; +struct uv_cb_dump_cpu { +struct uv_cb_header header; +u64 reserved08[2 ]; +u64 cpu_handle; +u64 dump_area_origin; +u64 reserved28[5 ]; +} __packed__aligned(8) ; + +struct uv_cb_dump_stor_state { +struct uv_cb_header header; +u64 reserved08[2 ]; +u64 config_handle; +u64 dump_area_origin; +u64 gaddr; +u64 reserved28[4 ]; +} __packed__aligned(8) ; + +struct uv_cb_dump_complete { +struct uv_cb_header header; +u64 reserved08[2 ]; +u64 config_handle; +u64 dump_area_origin; +u64 reserved30[5 ]; +} __packed__aligned(8) ; +static inline int __uv_call (unsigned long r1,unsigned long r2) {int cc;
Signature · 1 line
2.34.1
Re: [PATCH v5 04/10] KVM: s390: pv: Add dump support definitions
Quoted 5 lines · Janosch Frank
Let's add the constants and structure definitions needed for the dump support.
Signed-off-by Janosch Frank<[email protected]>Reviewed-by Claudio Imbrenda<[email protected]>
Janosch Frank
maintainerPATCH v5 5/10 KVM: s390: pv: Add query dump information
In reply to Janosch FrankThe dump API requires userspace to provide buffers into which we will store data. The dump information added in this patch tells userspace how big those buffers need to be.
--- arch/s390/kvm/kvm-s390.c | 11 +++++++++++ include/uapi/linux/kvm.h | 12 +++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)
arch/s390/kvm/kvm-s390.c +11 -0
@@ -2255,6 +2255,17 @@ static ssize_t kvm_s390_handle_pv_info(struct kvm_s390_pv_info *info)return len_min; } +case KVM_PV_INFO_DUMP : { + len_min =sizeof (info->header) +sizeof (info->dump); + +if (info->header.len_max < len_min) +return -EINVAL ; + + info->dump.dump_cpu_buffer_len = uv_info.guest_cpu_stor_len; + info->dump.dump_config_mem_buffer_per_1m = uv_info.conf_dump_storage_state_len; + info->dump.dump_config_finalize_len = uv_info.conf_dump_finalize_len; +return len_min; + }default :return -EINVAL ; }
include/uapi/linux/kvm.h +11 -1
@@ -1655,6 +1655,13 @@ struct kvm_s390_pv_unp {enum pv_cmd_info_id {KVM_PV_INFO_VM , +KVM_PV_INFO_DUMP , +}; + +struct kvm_s390_pv_info_dump { +__u64 dump_cpu_buffer_len; +__u64 dump_config_mem_buffer_per_1m; +__u64 dump_config_finalize_len; };struct kvm_s390_pv_info_vm {
@@ -1674,7 +1681,10 @@ struct kvm_s390_pv_info_header {struct kvm_s390_pv_info {struct kvm_s390_pv_info_header header; -struct kvm_s390_pv_info_vm vm; +union { +struct kvm_s390_pv_info_dump dump; +struct kvm_s390_pv_info_vm vm; + }; };enum pv_cmd_id {
Signature · 1 line
2.34.1
Re: [PATCH v5 05/10] KVM: s390: pv: Add query dump information
Quoted 5 lines · On Mon, 16 May 2022 09:08:12 +0000 Janosch Frank <[email protected]> wrote:
The dump API requires userspace to provide buffers into which we will store data. The dump information added in this patch tells userspace how big those buffers need to be.
Signed-off-by Janosch Frank <[email protected]>
Quoted 57 lines
--- arch/s390/kvm/kvm-s390.c | 11 +++++++++++ include/uapi/linux/kvm.h | 12 +++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)arch/s390/kvm/kvm-s390.c +11
-0@@ -2255,6 +2255,17 @@ static ssize_t kvm_s390_handle_pv_info(struct kvm_s390_pv_info *info)return len_min; } +case KVM_PV_INFO_DUMP : { + len_min =sizeof (info->header) +sizeof (info->dump); + +if (info->header.len_max < len_min) +return -EINVAL ; + + info->dump.dump_cpu_buffer_len = uv_info.guest_cpu_stor_len; + info->dump.dump_config_mem_buffer_per_1m = uv_info.conf_dump_storage_state_len; + info->dump.dump_config_finalize_len = uv_info.conf_dump_finalize_len; +return len_min; + }default :return -EINVAL ; }include/uapi/linux/kvm.h +11
-1@@ -1655,6 +1655,13 @@ struct kvm_s390_pv_unp {enum pv_cmd_info_id {KVM_PV_INFO_VM , +KVM_PV_INFO_DUMP , +}; + +struct kvm_s390_pv_info_dump { +__u64 dump_cpu_buffer_len; +__u64 dump_config_mem_buffer_per_1m; +__u64 dump_config_finalize_len; };struct kvm_s390_pv_info_vm {@@ -1674,7 +1681,10 @@ struct kvm_s390_pv_info_header {struct kvm_s390_pv_info {struct kvm_s390_pv_info_header header; -struct kvm_s390_pv_info_vm vm; +union { +struct kvm_s390_pv_info_dump dump; +struct kvm_s390_pv_info_vm vm; + }; };enum pv_cmd_id {
Re: [PATCH v5 05/10] KVM: s390: pv: Add query dump information
In reply to Janosch FrankQuoted 5 lines · Janosch Frank
The dump API requires userspace to provide buffers into which we will store data. The dump information added in this patch tells userspace how big those buffers need to be.
Signed-off-by Janosch Frank <[email protected]>
Janosch Frank
maintainerPATCH v5 6/10 kvm: s390: Add configuration dump functionality
In reply to Janosch FrankSometimes dumping inside of a VM fails, is unavailable or doesn't yield the required data. For these occasions we dump the VM from the outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the guest through dumpers like KDUMP. A PV guest can be dumped from the hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the Ultravisor who safeguards the VM state. New UV calls have been added to initialize the dump, dump storage state data, dump cpu data and complete the dump process. We expose these calls in this patch via a new UV ioctl command.
The sensitive parts of the dump data are encrypted, the dump key is derived from the Customer Communication Key (CCK). This ensures that only the owner of the VM who has the CCK can decrypt the dump data.
The memory is dumped / read via a normal export call and a re-import after the dump initialization is not needed (no re-encryption with a dump key).
--- arch/s390/include/asm/kvm_host.h | 1 + arch/s390/kvm/kvm-s390.c | 126 +++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 2 + arch/s390/kvm/pv.c | 113 +++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 15 ++++ 5 files changed, 257 insertions(+)
arch/s390/include/asm/kvm_host.h +1 -0
@@ -923,6 +923,7 @@ struct kvm_s390_pv {u64 guest_len;unsigned long stor_base;void *stor_var; +bool dumping; };struct kvm_arch {
arch/s390/kvm/kvm-s390.c +126 -0
144 lines not on this page · raw message
arch/s390/kvm/kvm-s390.h +2 -0
@@ -250,6 +250,8 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,int kvm_s390_pv_unpack (struct kvm *kvm,unsigned long addr,unsigned long size,unsigned long tweak,u16 *rc,u16 *rrc);int kvm_s390_pv_set_cpu_state (struct kvm_vcpu *vcpu,u8 state); +int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user, +u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc);static inline u64 kvm_s390_pv_get_handle (struct kvm *kvm) {
arch/s390/kvm/pv.c +113 -0
122 lines not on this page · raw message
include/uapi/linux/kvm.h +15 -0
@@ -1653,6 +1653,20 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_dmp_id { +KVM_PV_DUMP_INIT , +KVM_PV_DUMP_CONFIG_STOR_STATE , +KVM_PV_DUMP_COMPLETE , +}; + +struct kvm_s390_pv_dmp { +__u64 subcmd; +__u64 buff_addr; +__u64 buff_len; +__u64 gaddr;/* For dump storage state */ +__u64 reserved[4 ]; +}; +enum pv_cmd_info_id {KVM_PV_INFO_VM ,KVM_PV_INFO_DUMP ,
@@ -1696,6 +1710,7 @@ enum pv_cmd_id {KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL ,KVM_PV_INFO , + KVM_PV_DUMP, }; struct kvm_pv_cmd {
Signature · 1 line
2.34.1
Claudio Imbrenda
maintainerRe: [PATCH v5 06/10] kvm: s390: Add configuration dump functionality
Quoted 55 lines · On Mon, 16 May 2022 09:08:13 +0000 Janosch Frank <[email protected]> wrote:
Sometimes dumping inside of a VM fails, is unavailable or doesn't yield the required data. For these occasions we dump the VM from the outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the guest through dumpers like KDUMP. A PV guest can be dumped from the hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the Ultravisor who safeguards the VM state. New UV calls have been added to initialize the dump, dump storage state data, dump cpu data and complete the dump process. We expose these calls in this patch via a new UV ioctl command.
The sensitive parts of the dump data are encrypted, the dump key is derived from the Customer Communication Key (CCK). This ensures that only the owner of the VM who has the CCK can decrypt the dump data.
The memory is dumped / read via a normal export call and a re-import after the dump initialization is not needed (no re-encryption with a dump key).
Signed-off-by Janosch Frank <[email protected]>--- arch/s390/include/asm/kvm_host.h | 1 + arch/s390/kvm/kvm-s390.c | 126 +++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 2 + arch/s390/kvm/pv.c | 113 +++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 15 ++++ 5 files changed, 257 insertions(+)arch/s390/include/asm/kvm_host.h +1
-0@@ -923,6 +923,7 @@ struct kvm_s390_pv {u64 guest_len;unsigned long stor_base;void *stor_var; +bool dumping; };struct kvm_arch {arch/s390/kvm/kvm-s390.c +4
-0@@ -2271,6 +2271,101 @@ static ssize_t kvm_s390_handle_pv_info(struct kvm_s390_pv_info *info) } } +static int kvm_s390_pv_dmp (struct kvm *kvm,struct kvm_pv_cmd *cmd, +struct kvm_s390_pv_dmp dmp) +{ +int r = -EINVAL ;
arch/s390/kvm/kvm-s390.c static ssize_t kvm_s390_handle_pv_info(struct kvm_s390_pv_info *info) · line 2287
Quoted 10 lines
arch/s390/kvm/kvm-s390.c +10
-0+void __user *result_buff = (void __user *)dmp.buff_addr; + +switch (dmp.subcmd) { +case KVM_PV_DUMP_INIT : { +if (kvm->arch.pv.dumping) +break ; + +/* +* Block SIE entry as concurrent dump UVCs could lead +* to validities.
to fatal validity intercepts
Quoted 19 lines
arch/s390/kvm/kvm-s390.c +19
-0+*/ +kvm_s390_vcpu_block_all (kvm); + + r =uv_cmd_nodata (kvm_s390_pv_get_handle (kvm), +UVC_CMD_DUMP_INIT , &cmd->rc, &cmd->rrc); +KVM_UV_EVENT (kvm,3 ,"PROTVIRT DUMP INIT: rc %x rrc %x" , + cmd->rc, cmd->rrc); +if (!r) { + kvm->arch.pv.dumping = true; + }else { +kvm_s390_vcpu_unblock_all (kvm); + r = -EINVAL ; + } +break ; + } +case KVM_PV_DUMP_CONFIG_STOR_STATE : { +if (!kvm->arch.pv.dumping) +break ; +
arch/s390/kvm/kvm-s390.c static ssize_t kvm_s390_handle_pv_info(struct kvm_s390_pv_info *info) · line 2316
Quoted 10 lines
arch/s390/kvm/kvm-s390.c +10
-0+/* +* gaddr is an output parameter since we might stop +* early. As dmp will be copied back in our caller, we +* don't need to do it ourselves. +*/ + r =kvm_s390_pv_dump_stor_state (kvm, result_buff, &dmp.gaddr, dmp.buff_len, + &cmd->rc, &cmd->rrc); +break ; + } +case KVM_PV_DUMP_COMPLETE : {
this starts to be quite complex, maybe push it into a separate function as well, like you did for KVM_PV_DUMP_CONFIG_STOR_STATE
Quoted 85 lines
arch/s390/kvm/kvm-s390.c +74
-0+struct uv_cb_dump_complete complete = { + .header.len =sizeof (complete), + .header.cmd =UVC_CMD_DUMP_COMPLETE , + .config_handle =kvm_s390_pv_get_handle (kvm), + }; +u64 *compl_data; + + r = -EINVAL ; +if (!kvm->arch.pv.dumping) +break ; + +if (dmp.buff_len < uv_info.conf_dump_finalize_len) +break ; + +/* Allocate dump area */ + r = -ENOMEM ; + compl_data =vzalloc (uv_info.conf_dump_finalize_len); +if (!compl_data) +break ; + complete.dump_area_origin = (u64 )compl_data; + + r =uv_call_sched (0 , (u64)&complete); + cmd->rc = complete.header.rc; + cmd->rrc = complete.header.rrc; +KVM_UV_EVENT (kvm,3 ,"PROTVIRT DUMP COMPLETE: rc %x rrc %x" , + complete.header.rc, complete.header.rrc); + +if (!r) { +/* +* kvm_s390_pv_dealloc_vm() will also (mem)set +* this to false on a reboot or other destroy +* operation for this vm. +*/ + kvm->arch.pv.dumping = false; +kvm_s390_vcpu_unblock_all (kvm); + r =copy_to_user (result_buff, compl_data, uv_info.conf_dump_finalize_len); +if (r) + r = -EFAULT ; + } +vfree (compl_data); +if (r >0 ) + r = -EINVAL ; +break ; + } +default : + r = -ENOTTY ; +break ; + } + +return r; +} +static int kvm_s390_handle_pv (struct kvm *kvm,struct kvm_pv_cmd *cmd) {int r =0 ;@@ -2447,6 +2542,28 @@ static int kvm_s390_handle_pv(struct kvm *kvm, struct kvm_pv_cmd *cmd) r =0 ;break ; } +case KVM_PV_DUMP : { +struct kvm_s390_pv_dmp dmp; + + r = -EINVAL ; +if (!kvm_s390_pv_is_protected (kvm)) +break ; + + r = -EFAULT ; +if (copy_from_user (&dmp, argp,sizeof (dmp))) +break ; + + r =kvm_s390_pv_dmp (kvm, cmd, dmp); +if (r) +break ; + +if (copy_to_user (argp, &dmp,sizeof (dmp))) { + r = -EFAULT ; +break ; + } + +break ; + }default : r = -ENOTTY ; }
arch/s390/kvm/kvm-s390.c int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) · line 4687
Quoted 7 lines
arch/s390/kvm/kvm-s390.c +4
-0@@ -4564,6 +4681,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)struct kvm_run *kvm_run = vcpu->run;int rc; +/* +* Running a VM while dumping always has the potential to +* produce inconsistent dump data. But for PV vcpus a SIE +* entry while dumping could also lead to a validity which we
"a fatal validity intercept"
Quoted 44 lines
arch/s390/kvm/kvm-s390.c +5
-0+* absolutely want to avoid. +*/ +if (vcpu->kvm->arch.pv.dumping) +return -EINVAL ; +if (kvm_run->immediate_exit)return -EINTR ;arch/s390/kvm/kvm-s390.h +2
-0@@ -250,6 +250,8 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,int kvm_s390_pv_unpack (struct kvm *kvm,unsigned long addr,unsigned long size,unsigned long tweak,u16 *rc,u16 *rrc);int kvm_s390_pv_set_cpu_state (struct kvm_vcpu *vcpu,u8 state); +int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user, +u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc);static inline u64 kvm_s390_pv_get_handle (struct kvm *kvm) {arch/s390/kvm/pv.c +8
-0@@ -7,6 +7,7 @@*/ #include <linux/kvm.h> #include <linux/kvm_host.h> +#include <linux/minmax.h> #include <linux/pagemap.h> #include <linux/sched/signal.h> #include <asm/gmap.h> @@ -298,3 +299,115 @@ int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state)return -EINVAL ;return 0 ; } + +/* Size of the cache for the storage state dump data. 1MB for now */ +#define DUMP_BUFF_LEN HPAGE_SIZE + +/* +* kvm_s390_pv_dump_stor_state +*
arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 318
Quoted 10 lines
arch/s390/kvm/pv.c +10
-0+* @kvm: pointer to the guest's KVM struct +* @buff_user: Userspace pointer where we will write the results to +* @gaddr: Starting absolute guest address for which the storage state +* is requested. This value will be updated with the last +* address for which data was written when returning to +* userspace. +* @buff_user_len: Length of the buff_user buffer +* @rc: Pointer to where the uvcb return code is stored +* @rrc: Pointer to where the uvcb return reason code is stored +*
please add:
Context: kvm->lock needs to be held
also explain that part of the user buffer might be written to even in case of failure (this also needs to go in the documentation)
arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 320
Quoted 2 lines
arch/s390/kvm/pv.c +2
-0+* Return: +* 0 on success
rc and rrc will also be set in case of success
arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 324
Quoted 4 lines
arch/s390/kvm/pv.c +4
-0+* -ENOMEM if allocating the cache fails +* -EINVAL if gaddr is not aligned to 1MB +* -EINVAL if buff_user_len is not aligned to uv_info.conf_dump_storage_state_len +* -EINVAL if the UV call fails, rc and rrc will be set in this case
have you considered a different code for UVC failure? so the caller can know that rc and rrc are meaningful
or just explain that rc and rrc will always be set; if the UVC is not performed, rc and rrc will be 0
Quoted 47 lines
arch/s390/kvm/pv.c +47
-0+* -EFAULT if copying the result to buff_user failed +*/ +int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user, +u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_stor_state uvcb = { + .header.cmd =UVC_CMD_DUMP_CONF_STOR_STATE , + .header.len =sizeof (uvcb), + .config_handle = kvm->arch.pv.handle, + .gaddr = *gaddr, + .dump_area_origin =0 , + }; +size_t buff_kvm_size; +size_t size_done =0 ; +u8 *buff_kvm =NULL ; +int cc, ret; + + ret = -EINVAL ; +/* UV call processes 1MB guest storage chunks at a time */ +if (!IS_ALIGNED (*gaddr,HPAGE_SIZE )) + goto out; + +/* +* We provide the storage state for 1MB chunks of guest +* storage. The buffer will need to be aligned to +* conf_dump_storage_state_len so we don't end on a partial +* chunk. +*/ +if (!buff_user_len || + !IS_ALIGNED (buff_user_len, uv_info.conf_dump_storage_state_len)) + goto out; + +/* +* Allocate a buffer from which we will later copy to the user +* process. We don't want userspace to dictate our buffer size +* so we limit it to DUMP_BUFF_LEN. +*/ + ret = -ENOMEM ; + buff_kvm_size =min_t (u64, buff_user_len,DUMP_BUFF_LEN ); + buff_kvm =vzalloc (buff_kvm_size); +if (!buff_kvm) + goto out; + + ret =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; +/* We will loop until the user buffer is filled or an error occurs */ + do {
arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 381
Quoted 10 lines
arch/s390/kvm/pv.c +10
-0+/* Get 1MB worth of guest storage state data */ + cc =uv_call_sched (0 , (u64)&uvcb); + +/* All or nothing */ +if (cc) { + ret = -EINVAL ; +break ; + } + + size_done += uv_info.conf_dump_storage_state_len;
maybe save this in a local const variable with a shorter name? would be more readable? const u64 dump_len = uv_info.conf_dump_storage_state_len;
Quoted 65 lines
arch/s390/kvm/pv.c +32
-0+ uvcb.dump_area_origin += uv_info.conf_dump_storage_state_len; + buff_user_len -= uv_info.conf_dump_storage_state_len; + uvcb.gaddr +=HPAGE_SIZE ; + +/* KVM Buffer full, time to copy to the process */ +if (!buff_user_len || size_done ==DUMP_BUFF_LEN ) { +if (copy_to_user (buff_user, buff_kvm, size_done)) { + ret = -EFAULT ; +break ; + } + + buff_user += size_done; + size_done =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; + } + }while (buff_user_len); + +/* Report back where we ended dumping */ + *gaddr = uvcb.gaddr; + +/* Lets only log errors, we don't want to spam */ +out: +if (ret) +KVM_UV_EVENT (kvm,3 , +"PROTVIRT DUMP STORAGE STATE: addr %llx ret %d, uvcb rc %x rrc %x" , + uvcb.gaddr, ret, uvcb.header.rc, uvcb.header.rrc); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +vfree (buff_kvm); + +return ret; +}include/uapi/linux/kvm.h +15
-0@@ -1653,6 +1653,20 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_dmp_id { +KVM_PV_DUMP_INIT , +KVM_PV_DUMP_CONFIG_STOR_STATE , +KVM_PV_DUMP_COMPLETE , +}; + +struct kvm_s390_pv_dmp { +__u64 subcmd; +__u64 buff_addr; +__u64 buff_len; +__u64 gaddr;/* For dump storage state */ +__u64 reserved[4 ]; +}; +enum pv_cmd_info_id {KVM_PV_INFO_VM ,KVM_PV_INFO_DUMP ,@@ -1696,6 +1710,7 @@ enum pv_cmd_id {KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL ,KVM_PV_INFO , + KVM_PV_DUMP, }; struct kvm_pv_cmd {
Janosch Frank
maintainerRe: [PATCH v5 06/10] kvm: s390: Add configuration dump functionality
Quoted 21 lines · Claudio Imbrenda
Quoted 18 lines · On Mon, 16 May 2022 09:08:13 +0000 Janosch Frank <[email protected]> wrote:
Sometimes dumping inside of a VM fails, is unavailable or doesn't yield the required data. For these occasions we dump the VM from the outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the guest through dumpers like KDUMP. A PV guest can be dumped from the hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the Ultravisor who safeguards the VM state. New UV calls have been added to initialize the dump, dump storage state data, dump cpu data and complete the dump process. We expose these calls in this patch via a new UV ioctl command.
The sensitive parts of the dump data are encrypted, the dump key is derived from the Customer Communication Key (CCK). This ensures that only the owner of the VM who has the CCK can decrypt the dump data.
Quoted 5 lines
Quoted 5 lines
The memory is dumped / read via a normal export call and a re-import after the dump initialization is not needed (no re-encryption with a dump key).
Signed-off-by Janosch Frank <[email protected]>
The cut code will be fixed according to your requests.
[...]
Quoted 14 lines
Quoted 6 lines
+/*
+ *kvm_s390_pv_dump_stor_state
+ *
+ * @kvm: pointer to the guest's KVM struct
+ * @buff_user: Userspace pointer where we will write the results to
+ * @gaddr: Starting absolute guest address for which the storage stateQuoted 7 lines
+ * is requested. This value will be updated with the last + * address for which data was written when returning to + * userspace.+ * @buff_user_len: Length of the
buff_userbuffer
+ * @rc: Pointer to where the uvcb return code is stored
+ * @rrc: Pointer to where the uvcb return reason code is stored
+ *
Quoted 2 lines
please add:
Context: kvm->lock needs to be held
Sure
Quoted 3 lines
also explain that part of the user buffer might be written to even in case of failure (this also needs to go in the documentation)
Ok
Quoted 5 lines
Quoted 3 lines
+ * Return:
+ * 0 on successrc and rrc will also be set in case of success
But that's different from the return code of this function and would belong to the function description above, no?
Quoted 11 lines
Quoted 5 lines
+ * -ENOMEM if allocating the cache fails + * -EINVAL if gaddr is not aligned to 1MB + * -EINVAL if buff_user_len is not aligned to uv_info.conf_dump_storage_state_len + * -EINVAL if the UV call fails, rc and rrc will be set in this casehave you considered a different code for UVC failure? so the caller can know that rc and rrc are meaningful
or just explain that rc and rrc will always be set; if the UVC is not performed, rc and rrc will be 0
If the UVC is not performed the rcs will not be *changed*, so it's advisable to set them to 0 to recognize a change.
Also:
While I generally like commenting as much as possible, this is starting to get out of hand, the comment header is now taking up a lot of space. I'll put the rc/rrc comment into the api documentation and I'm considering putting the partial write comment into there too.
Quoted 128 lines
Quoted 48 lines
+ *
-EFAULTif copying the result tobuff_userfailed
+ */arch/s390/kvm/pv.c +45
-0+int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user, +u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_stor_state uvcb = { + .header.cmd =UVC_CMD_DUMP_CONF_STOR_STATE , + .header.len =sizeof (uvcb), + .config_handle = kvm->arch.pv.handle, + .gaddr = *gaddr, + .dump_area_origin =0 , + }; +size_t buff_kvm_size; +size_t size_done =0 ; +u8 *buff_kvm =NULL ; +int cc, ret; + + ret = -EINVAL ; +/* UV call processes 1MB guest storage chunks at a time */ +if (!IS_ALIGNED (*gaddr,HPAGE_SIZE )) + goto out; + +/* +* We provide the storage state for 1MB chunks of guest +* storage. The buffer will need to be aligned to +* conf_dump_storage_state_len so we don't end on a partial +* chunk. +*/ +if (!buff_user_len || + !IS_ALIGNED (buff_user_len, uv_info.conf_dump_storage_state_len)) + goto out; + +/* +* Allocate a buffer from which we will later copy to the user +* process. We don't want userspace to dictate our buffer size +* so we limit it to DUMP_BUFF_LEN. +*/ + ret = -ENOMEM ; + buff_kvm_size =min_t (u64, buff_user_len,DUMP_BUFF_LEN ); + buff_kvm =vzalloc (buff_kvm_size); +if (!buff_kvm) + goto out; + + ret =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; +/* We will loop until the user buffer is filled or an error occurs */ + do {arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 381
Quoted 10 lines
arch/s390/kvm/pv.c +10
-0+/* Get 1MB worth of guest storage state data */ + cc =uv_call_sched (0 , (u64)&uvcb); + +/* All or nothing */ +if (cc) { + ret = -EINVAL ; +break ; + } + + size_done += uv_info.conf_dump_storage_state_len;maybe save this in a local const variable with a shorter name? would be more readable? const u64
dump_len= uv_info.conf_dump_storage_state_len;Quoted 65 lines
arch/s390/kvm/pv.c +32
-0+ uvcb.dump_area_origin += uv_info.conf_dump_storage_state_len; + buff_user_len -= uv_info.conf_dump_storage_state_len; + uvcb.gaddr +=HPAGE_SIZE ; + +/* KVM Buffer full, time to copy to the process */ +if (!buff_user_len || size_done ==DUMP_BUFF_LEN ) { +if (copy_to_user (buff_user, buff_kvm, size_done)) { + ret = -EFAULT ; +break ; + } + + buff_user += size_done; + size_done =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; + } + }while (buff_user_len); + +/* Report back where we ended dumping */ + *gaddr = uvcb.gaddr; + +/* Lets only log errors, we don't want to spam */ +out: +if (ret) +KVM_UV_EVENT (kvm,3 , +"PROTVIRT DUMP STORAGE STATE: addr %llx ret %d, uvcb rc %x rrc %x" , + uvcb.gaddr, ret, uvcb.header.rc, uvcb.header.rrc); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +vfree (buff_kvm); + +return ret; +}include/uapi/linux/kvm.h +15
-0@@ -1653,6 +1653,20 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_dmp_id { +KVM_PV_DUMP_INIT , +KVM_PV_DUMP_CONFIG_STOR_STATE , +KVM_PV_DUMP_COMPLETE , +}; + +struct kvm_s390_pv_dmp { +__u64 subcmd; +__u64 buff_addr; +__u64 buff_len; +__u64 gaddr;/* For dump storage state */ +__u64 reserved[4 ]; +}; +enum pv_cmd_info_id {KVM_PV_INFO_VM ,KVM_PV_INFO_DUMP ,@@ -1696,6 +1710,7 @@ enum pv_cmd_id {KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL ,KVM_PV_INFO , + KVM_PV_DUMP, }; struct kvm_pv_cmd {
Claudio Imbrenda
maintainerRe: [PATCH v5 06/10] kvm: s390: Add configuration dump functionality
Quoted 26 lines · On Tue, 17 May 2022 15:39:14 +0200 Janosch Frank <[email protected]> wrote:
Quoted 25 lines · Claudio Imbrenda
Quoted 22 lines · On Mon, 16 May 2022 09:08:13 +0000 Janosch Frank <[email protected]> wrote:
Sometimes dumping inside of a VM fails, is unavailable or doesn't yield the required data. For these occasions we dump the VM from the outside, writing memory and cpu data to a file.
Up to now PV guests only supported dumping from the inside of the guest through dumpers like KDUMP. A PV guest can be dumped from the hypervisor but the data will be stale and / or encrypted.
To get the actual state of the PV VM we need the help of the Ultravisor who safeguards the VM state. New UV calls have been added to initialize the dump, dump storage state data, dump cpu data and complete the dump process. We expose these calls in this patch via a new UV ioctl command.
The sensitive parts of the dump data are encrypted, the dump key is derived from the Customer Communication Key (CCK). This ensures that only the owner of the VM who has the CCK can decrypt the dump data.
The memory is dumped / read via a normal export call and a re-import after the dump initialization is not needed (no re-encryption with a dump key).
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Signed-off-by Janosch Frank <[email protected]>The cut code will be fixed according to your requests.
[...]
Quoted 1 line
Quoted 1 line
+/*
/**
Quoted 25 lines
Quoted 13 lines
Quoted 5 lines
+ *
kvm_s390_pv_dump_stor_state
+ *
+ * @kvm: pointer to the guest's KVM struct
+ * @buff_user: Userspace pointer where we will write the results to
+ * @gaddr: Starting absolute guest address for which the storage stateQuoted 7 lines
+ * is requested. This value will be updated with the last + * address for which data was written when returning to + * userspace.+ * @buff_user_len: Length of the
buff_userbuffer
+ * @rc: Pointer to where the uvcb return code is stored
+ * @rrc: Pointer to where the uvcb return reason code is stored
+ *Quoted 2 lines
please add:
Context: kvm->lock needs to be heldSure
Quoted 3 lines
also explain that part of the user buffer might be written to even in case of failure (this also needs to go in the documentation)
Ok
Quoted 1 line
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
+ * Return:
+ * 0 on successrc and rrc will also be set in case of success
But that's different from the return code of this function and would belong to the function description above, no?
yes
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
+ * -ENOMEM if allocating the cache fails + * -EINVAL if gaddr is not aligned to 1MB + * -EINVAL if buff_user_len is not aligned to uv_info.conf_dump_storage_state_len + * -EINVAL if the UV call fails, rc and rrc will be set in this case
Quoted 8 lines
Quoted 5 lines
have you considered a different code for UVC failure? so the caller can know that rc and rrc are meaningful
or just explain that rc and rrc will always be set; if the UVC is not performed, rc and rrc will be 0
If the UVC is not performed the rcs will not be *changed*, so it's advisable to set them to 0 to recognize a change.
ah, right, you jump to out only for errors after the allocation
Quoted 7 lines
Also:
While I generally like commenting as much as possible, this is starting to get out of hand, the comment header is now taking up a lot of space. I'll put the rc/rrc comment into the api documentation and I'm considering putting the partial write comment into there too.
I don't know, the comments are also used to generate documentation automatically, so I think they should contain all the information in one way or the other.
I don't see issues with huge comments, if the function is complex and has lots of parameters and possible return values.
as much as it bothers you, the whole comment block has 0 lines of actual description of what the function does, so I don't think this is getting out of hand :)
Quoted 55 lines
Quoted 55 lines
Quoted 55 lines
+ *
-EFAULTif copying the result tobuff_userfailed
+ */arch/s390/kvm/pv.c +51
-0+int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user, +u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_stor_state uvcb = { + .header.cmd =UVC_CMD_DUMP_CONF_STOR_STATE , + .header.len =sizeof (uvcb), + .config_handle = kvm->arch.pv.handle, + .gaddr = *gaddr, + .dump_area_origin =0 , + }; +size_t buff_kvm_size; +size_t size_done =0 ; +u8 *buff_kvm =NULL ; +int cc, ret; + + ret = -EINVAL ; +/* UV call processes 1MB guest storage chunks at a time */ +if (!IS_ALIGNED (*gaddr,HPAGE_SIZE )) + goto out; + +/* +* We provide the storage state for 1MB chunks of guest +* storage. The buffer will need to be aligned to +* conf_dump_storage_state_len so we don't end on a partial +* chunk. +*/ +if (!buff_user_len || + !IS_ALIGNED (buff_user_len, uv_info.conf_dump_storage_state_len)) + goto out; + +/* +* Allocate a buffer from which we will later copy to the user +* process. We don't want userspace to dictate our buffer size +* so we limit it to DUMP_BUFF_LEN. +*/ + ret = -ENOMEM ; + buff_kvm_size =min_t (u64, buff_user_len,DUMP_BUFF_LEN ); + buff_kvm =vzalloc (buff_kvm_size); +if (!buff_kvm) + goto out; + + ret =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; +/* We will loop until the user buffer is filled or an error occurs */ + do { + /* Get 1MB worth of guest storage state data */ + cc = uv_call_sched(0, (u64)&uvcb); + + /* All or nothing */ + if (cc) { + ret = -EINVAL;
Quoted 8 lines
Quoted 8 lines
arch/s390/kvm/pv.c int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state) · line 381
Quoted 4 lines
arch/s390/kvm/pv.c +4
-0+break ; + } + + size_done += uv_info.conf_dump_storage_state_len;maybe save this in a local const variable with a shorter name? would be more readable? const u64
dump_len= uv_info.conf_dump_storage_state_len;
did you see this one ^ ?
Quoted 67 lines
Quoted 66 lines
Quoted 65 lines
arch/s390/kvm/pv.c +32
-0+ uvcb.dump_area_origin += uv_info.conf_dump_storage_state_len; + buff_user_len -= uv_info.conf_dump_storage_state_len; + uvcb.gaddr +=HPAGE_SIZE ; + +/* KVM Buffer full, time to copy to the process */ +if (!buff_user_len || size_done ==DUMP_BUFF_LEN ) { +if (copy_to_user (buff_user, buff_kvm, size_done)) { + ret = -EFAULT ; +break ; + } + + buff_user += size_done; + size_done =0 ; + uvcb.dump_area_origin = (u64 )buff_kvm; + } + }while (buff_user_len); + +/* Report back where we ended dumping */ + *gaddr = uvcb.gaddr; + +/* Lets only log errors, we don't want to spam */ +out: +if (ret) +KVM_UV_EVENT (kvm,3 , +"PROTVIRT DUMP STORAGE STATE: addr %llx ret %d, uvcb rc %x rrc %x" , + uvcb.gaddr, ret, uvcb.header.rc, uvcb.header.rrc); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +vfree (buff_kvm); + +return ret; +}include/uapi/linux/kvm.h +15
-0@@ -1653,6 +1653,20 @@ struct kvm_s390_pv_unp {__u64 tweak; }; +enum pv_cmd_dmp_id { +KVM_PV_DUMP_INIT , +KVM_PV_DUMP_CONFIG_STOR_STATE , +KVM_PV_DUMP_COMPLETE , +}; + +struct kvm_s390_pv_dmp { +__u64 subcmd; +__u64 buff_addr; +__u64 buff_len; +__u64 gaddr;/* For dump storage state */ +__u64 reserved[4 ]; +}; +enum pv_cmd_info_id {KVM_PV_INFO_VM ,KVM_PV_INFO_DUMP ,@@ -1696,6 +1710,7 @@ enum pv_cmd_id {KVM_PV_PREP_RESET ,KVM_PV_UNSHARE_ALL ,KVM_PV_INFO , + KVM_PV_DUMP, }; struct kvm_pv_cmd {
Janosch Frank
maintainerPATCH v5 7/10 kvm: s390: Add CPU dump functionality
In reply to Janosch FrankThe previous patch introduced the per-VM dump functions now let's focus on dumping the VCPU state via the newly introduced KVM_S390_PV_CPU_COMMAND ioctl which mirrors the VM UV ioctl and can be extended with new commands later.
--- arch/s390/kvm/kvm-s390.c | 73 ++++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 1 + arch/s390/kvm/pv.c | 16 +++++++++ include/uapi/linux/kvm.h | 4 +++ 4 files changed, 94 insertions(+)
arch/s390/kvm/kvm-s390.c +73 -0
@@ -5129,6 +5129,52 @@ long kvm_arch_vcpu_async_ioctl(struct file *filp,return -ENOIOCTLCMD ; } +static int kvm_s390_handle_pv_vcpu_dump (struct kvm_vcpu *vcpu, +struct kvm_pv_cmd *cmd) +{ +struct kvm_s390_pv_dmp dmp; +void *data; +int ret; + +/* Dump initialization is a prerequisite */ +if (!vcpu->kvm->arch.pv.dumping) +return -EINVAL ; + +if (copy_from_user (&dmp, (__u8 __user *)cmd->data,sizeof (dmp))) +return -EFAULT ; + +/* We only handle this subcmd right now */ +if (dmp.subcmd !=KVM_PV_DUMP_CPU ) +return -EINVAL ; + +/* CPU dump length is the same as create cpu storage donation. */ +if (dmp.buff_len != uv_info.guest_cpu_stor_len) +return -EINVAL ; + + data =vzalloc (uv_info.guest_cpu_stor_len); +if (!data) +return -ENOMEM ; + + ret =kvm_s390_pv_dump_cpu (vcpu, data, &cmd->rc, &cmd->rrc); + +VCPU_EVENT (vcpu,3 ,"PROTVIRT DUMP CPU %d rc %x rrc %x" , + vcpu->vcpu_id, cmd->rc, cmd->rrc); + +if (ret) { +vfree (data); +return -EINVAL ; + } + +/* On success copy over the dump data */ +if (copy_to_user ((__u8 __user *)dmp.buff_addr, data, uv_info.guest_cpu_stor_len)) { +vfree (data); +return -EFAULT ; + } + +vfree (data); +return 0 ; +} +long kvm_arch_vcpu_ioctl (struct file *filp,unsigned int ioctl,unsigned long arg) {
@@ -5293,6 +5339,33 @@ long kvm_arch_vcpu_ioctl(struct file *filp, irq_state.len);break ; } +case KVM_S390_PV_CPU_COMMAND : { +struct kvm_pv_cmd cmd; + + r = -EINVAL ; +if (!is_prot_virt_host ()) +break ; + + r = -EFAULT ; +if (copy_from_user (&cmd, argp,sizeof (cmd))) +break ; + + r = -EINVAL ; +if (cmd.flags) +break ; + +/* We only handle this cmd right now */ +if (cmd.cmd !=KVM_PV_DUMP ) +break ; + + r =kvm_s390_handle_pv_vcpu_dump (vcpu, &cmd); + +/* Always copy over UV rc / rrc data */ +if (copy_to_user ((__u8 __user *)argp, &cmd.rc, +sizeof (cmd.rc) +sizeof (cmd.rrc))) + r = -EFAULT ; +break ; + }default : r = -ENOTTY ; }
arch/s390/kvm/kvm-s390.h +1 -0
@@ -250,6 +250,7 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,int kvm_s390_pv_unpack (struct kvm *kvm,unsigned long addr,unsigned long size,unsigned long tweak,u16 *rc,u16 *rrc);int kvm_s390_pv_set_cpu_state (struct kvm_vcpu *vcpu,u8 state); +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc);int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user,u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc);
arch/s390/kvm/pv.c +16 -0
@@ -300,6 +300,22 @@ int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state)return 0 ; } +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_cpu uvcb = { + .header.cmd =UVC_CMD_DUMP_CPU , + .header.len =sizeof (uvcb), + .cpu_handle = vcpu->arch.pv.handle, + .dump_area_origin = (u64 )buff, + }; +int cc; + + cc =uv_call_sched (0 , (u64)&uvcb); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +return cc; +} +/* Size of the cache for the storage state dump data. 1MB for now */ #define DUMP_BUFF_LEN HPAGE_SIZE
include/uapi/linux/kvm.h +4 -0
@@ -1657,6 +1657,7 @@ enum pv_cmd_dmp_id {KVM_PV_DUMP_INIT ,KVM_PV_DUMP_CONFIG_STOR_STATE ,KVM_PV_DUMP_COMPLETE , + KVM_PV_DUMP_CPU, }; struct kvm_s390_pv_dmp {
@@ -2118,4 +2119,7 @@ struct kvm_stats_desc {/* Available with KVM_CAP_XSAVE2 */ #define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) +#endif /* __LINUX_KVM_H */
Signature · 1 line
2.34.1
Claudio Imbrenda
maintainerRe: [PATCH v5 07/10] kvm: s390: Add CPU dump functionality
Quoted 34 lines · On Mon, 16 May 2022 09:08:14 +0000 Janosch Frank <[email protected]> wrote:
The previous patch introduced the per-VM dump functions now let's focus on dumping the VCPU state via the newly introduced
KVM_S390_PV_CPU_COMMANDioctl which mirrors the VM UV ioctl and can be extended with new commands later.Signed-off-by Janosch Frank <[email protected]>--- arch/s390/kvm/kvm-s390.c | 73 ++++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 1 + arch/s390/kvm/pv.c | 16 +++++++++ include/uapi/linux/kvm.h | 4 +++ 4 files changed, 94 insertions(+)arch/s390/kvm/kvm-s390.c +13
-0@@ -5129,6 +5129,52 @@ long kvm_arch_vcpu_async_ioctl(struct file *filp,return -ENOIOCTLCMD ; } +static int kvm_s390_handle_pv_vcpu_dump (struct kvm_vcpu *vcpu, +struct kvm_pv_cmd *cmd) +{ +struct kvm_s390_pv_dmp dmp; +void *data; +int ret; + +/* Dump initialization is a prerequisite */ +if (!vcpu->kvm->arch.pv.dumping) +return -EINVAL ; + +if (copy_from_user (&dmp, (__u8 __user *)cmd->data,sizeof (dmp))) +return -EFAULT ;
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5154
Quoted 10 lines
arch/s390/kvm/kvm-s390.c +10
-0+ +/* We only handle this subcmd right now */ +if (dmp.subcmd !=KVM_PV_DUMP_CPU ) +return -EINVAL ; + +/* CPU dump length is the same as create cpu storage donation. */ +if (dmp.buff_len != uv_info.guest_cpu_stor_len) +return -EINVAL ; + + data =vzalloc (uv_info.guest_cpu_stor_len);
is it really so big that you need to do a virtual allocation? (I thought it was at most a few pages)
can you at least use kvzalloc?
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5165
Quoted 11 lines
arch/s390/kvm/kvm-s390.c +11
-0+if (!data) +return -ENOMEM ; + + ret =kvm_s390_pv_dump_cpu (vcpu, data, &cmd->rc, &cmd->rrc); + +VCPU_EVENT (vcpu,3 ,"PROTVIRT DUMP CPU %d rc %x rrc %x" , + vcpu->vcpu_id, cmd->rc, cmd->rrc); + +if (ret) { +vfree (data); +return -EINVAL ;
if (ret)
ret = -EINVAL;
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5169
Quoted 4 lines
arch/s390/kvm/kvm-s390.c +4
-0+ } + +/* On success copy over the dump data */ +if (copy_to_user ((__u8 __user *)dmp.buff_addr, data, uv_info.guest_cpu_stor_len)) {
if (!ret && ...)
ret = -EFAULT;
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5175
Quoted 6 lines
arch/s390/kvm/kvm-s390.c +6
-0+vfree (data); +return -EFAULT ; + } + +vfree (data); +return 0 ;
return ret;
this way you have only one free and one return, should be more readable
Quoted 98 lines
arch/s390/kvm/kvm-s390.c +29
-0+} +long kvm_arch_vcpu_ioctl (struct file *filp,unsigned int ioctl,unsigned long arg) {@@ -5293,6 +5339,33 @@ long kvm_arch_vcpu_ioctl(struct file *filp, irq_state.len);break ; } +case KVM_S390_PV_CPU_COMMAND : { +struct kvm_pv_cmd cmd; + + r = -EINVAL ; +if (!is_prot_virt_host ()) +break ; + + r = -EFAULT ; +if (copy_from_user (&cmd, argp,sizeof (cmd))) +break ; + + r = -EINVAL ; +if (cmd.flags) +break ; + +/* We only handle this cmd right now */ +if (cmd.cmd !=KVM_PV_DUMP ) +break ; + + r =kvm_s390_handle_pv_vcpu_dump (vcpu, &cmd); + +/* Always copy over UV rc / rrc data */ +if (copy_to_user ((__u8 __user *)argp, &cmd.rc, +sizeof (cmd.rc) +sizeof (cmd.rrc))) + r = -EFAULT ; +break ; + }default : r = -ENOTTY ; }arch/s390/kvm/kvm-s390.h +1
-0@@ -250,6 +250,7 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,int kvm_s390_pv_unpack (struct kvm *kvm,unsigned long addr,unsigned long size,unsigned long tweak,u16 *rc,u16 *rrc);int kvm_s390_pv_set_cpu_state (struct kvm_vcpu *vcpu,u8 state); +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc);int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user,u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc);arch/s390/kvm/pv.c +16
-0@@ -300,6 +300,22 @@ int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state)return 0 ; } +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_cpu uvcb = { + .header.cmd =UVC_CMD_DUMP_CPU , + .header.len =sizeof (uvcb), + .cpu_handle = vcpu->arch.pv.handle, + .dump_area_origin = (u64 )buff, + }; +int cc; + + cc =uv_call_sched (0 , (u64)&uvcb); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +return cc; +} +/* Size of the cache for the storage state dump data. 1MB for now */ #define DUMP_BUFF_LEN HPAGE_SIZEinclude/uapi/linux/kvm.h +4
-0@@ -1657,6 +1657,7 @@ enum pv_cmd_dmp_id {KVM_PV_DUMP_INIT ,KVM_PV_DUMP_CONFIG_STOR_STATE ,KVM_PV_DUMP_COMPLETE , + KVM_PV_DUMP_CPU, }; struct kvm_s390_pv_dmp {@@ -2118,4 +2119,7 @@ struct kvm_stats_desc {/* Available with KVM_CAP_XSAVE2 */ #define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) +#endif /* __LINUX_KVM_H */
Janosch Frank
maintainerRe: [PATCH v5 07/10] kvm: s390: Add CPU dump functionality
Quoted 42 lines · Claudio Imbrenda
Quoted 39 lines · On Mon, 16 May 2022 09:08:14 +0000 Janosch Frank <[email protected]> wrote:
The previous patch introduced the per-VM dump functions now let's focus on dumping the VCPU state via the newly introduced
KVM_S390_PV_CPU_COMMANDioctl which mirrors the VM UV ioctl and can be extended with new commands later.Signed-off-by Janosch Frank <[email protected]>--- arch/s390/kvm/kvm-s390.c | 73 ++++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 1 + arch/s390/kvm/pv.c | 16 +++++++++ include/uapi/linux/kvm.h | 4 +++ 4 files changed, 94 insertions(+)arch/s390/kvm/kvm-s390.c +18
-0@@ -5129,6 +5129,52 @@ long kvm_arch_vcpu_async_ioctl(struct file *filp,return -ENOIOCTLCMD ; } +static int kvm_s390_handle_pv_vcpu_dump (struct kvm_vcpu *vcpu, +struct kvm_pv_cmd *cmd) +{ +struct kvm_s390_pv_dmp dmp; +void *data; +int ret; + +/* Dump initialization is a prerequisite */ +if (!vcpu->kvm->arch.pv.dumping) +return -EINVAL ; + +if (copy_from_user (&dmp, (__u8 __user *)cmd->data,sizeof (dmp))) +return -EFAULT ; + +/* We only handle this subcmd right now */ +if (dmp.subcmd !=KVM_PV_DUMP_CPU ) +return -EINVAL ; +
Quoted 8 lines
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5154
Quoted 5 lines
arch/s390/kvm/kvm-s390.c +5
-0+/* CPU dump length is the same as create cpu storage donation. */ +if (dmp.buff_len != uv_info.guest_cpu_stor_len) +return -EINVAL ; + + data =vzalloc (uv_info.guest_cpu_stor_len);is it really so big that you need to do a virtual allocation? (I thought it was at most a few pages)
It's at least a page
Quoted 2 lines
can you at least use kvzalloc?
Sure
Quoted 135 lines
arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5165
Quoted 12 lines
arch/s390/kvm/kvm-s390.c +11
-0+if (!data) +return -ENOMEM ; + + ret =kvm_s390_pv_dump_cpu (vcpu, data, &cmd->rc, &cmd->rrc); + +VCPU_EVENT (vcpu,3 ,"PROTVIRT DUMP CPU %d rc %x rrc %x" , + vcpu->vcpu_id, cmd->rc, cmd->rrc); + +if (ret) { +vfree (data); +return -EINVAL ;if (ret)
ret = -EINVAL;arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5169
Quoted 4 lines
arch/s390/kvm/kvm-s390.c +4
-0+ } + +/* On success copy over the dump data */ +if (copy_to_user ((__u8 __user *)dmp.buff_addr, data, uv_info.guest_cpu_stor_len)) {if (!ret && ...)
ret = -EFAULT;arch/s390/kvm/kvm-s390.c long kvm_arch_vcpu_async_ioctl(struct file *filp, · line 5175
Quoted 6 lines
arch/s390/kvm/kvm-s390.c +6
-0+vfree (data); +return -EFAULT ; + } + +vfree (data); +return 0 ;return ret;
this way you have only one free and one return, should be more readable
Quoted 98 lines
arch/s390/kvm/kvm-s390.c +29
-0+} +long kvm_arch_vcpu_ioctl (struct file *filp,unsigned int ioctl,unsigned long arg) {@@ -5293,6 +5339,33 @@ long kvm_arch_vcpu_ioctl(struct file *filp, irq_state.len);break ; } +case KVM_S390_PV_CPU_COMMAND : { +struct kvm_pv_cmd cmd; + + r = -EINVAL ; +if (!is_prot_virt_host ()) +break ; + + r = -EFAULT ; +if (copy_from_user (&cmd, argp,sizeof (cmd))) +break ; + + r = -EINVAL ; +if (cmd.flags) +break ; + +/* We only handle this cmd right now */ +if (cmd.cmd !=KVM_PV_DUMP ) +break ; + + r =kvm_s390_handle_pv_vcpu_dump (vcpu, &cmd); + +/* Always copy over UV rc / rrc data */ +if (copy_to_user ((__u8 __user *)argp, &cmd.rc, +sizeof (cmd.rc) +sizeof (cmd.rrc))) + r = -EFAULT ; +break ; + }default : r = -ENOTTY ; }arch/s390/kvm/kvm-s390.h +1
-0@@ -250,6 +250,7 @@ int kvm_s390_pv_set_sec_parms(struct kvm *kvm, void *hdr, u64 length, u16 *rc,int kvm_s390_pv_unpack (struct kvm *kvm,unsigned long addr,unsigned long size,unsigned long tweak,u16 *rc,u16 *rrc);int kvm_s390_pv_set_cpu_state (struct kvm_vcpu *vcpu,u8 state); +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc);int kvm_s390_pv_dump_stor_state (struct kvm *kvm,void __user *buff_user,u64 *gaddr,u64 buff_user_len,u16 *rc,u16 *rrc);arch/s390/kvm/pv.c +16
-0@@ -300,6 +300,22 @@ int kvm_s390_pv_set_cpu_state(struct kvm_vcpu *vcpu, u8 state)return 0 ; } +int kvm_s390_pv_dump_cpu (struct kvm_vcpu *vcpu,void *buff,u16 *rc,u16 *rrc) +{ +struct uv_cb_dump_cpu uvcb = { + .header.cmd =UVC_CMD_DUMP_CPU , + .header.len =sizeof (uvcb), + .cpu_handle = vcpu->arch.pv.handle, + .dump_area_origin = (u64 )buff, + }; +int cc; + + cc =uv_call_sched (0 , (u64)&uvcb); + *rc = uvcb.header.rc; + *rrc = uvcb.header.rrc; +return cc; +} +/* Size of the cache for the storage state dump data. 1MB for now */ #define DUMP_BUFF_LEN HPAGE_SIZEinclude/uapi/linux/kvm.h +4
-0@@ -1657,6 +1657,7 @@ enum pv_cmd_dmp_id {KVM_PV_DUMP_INIT ,KVM_PV_DUMP_CONFIG_STOR_STATE ,KVM_PV_DUMP_COMPLETE , + KVM_PV_DUMP_CPU, }; struct kvm_s390_pv_dmp {@@ -2118,4 +2119,7 @@ struct kvm_stats_desc {/* Available with KVM_CAP_XSAVE2 */ #define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) +#endif /* __LINUX_KVM_H */
Janosch Frank
maintainerPATCH v5 8/10 kvm: s390: Add KVM_CAP_S390_PROTECTED_DUMP
In reply to Janosch FrankThe capability indicates dump support for protected VMs.
--- arch/s390/kvm/kvm-s390.c | 20 ++++++++++++++++++++ include/uapi/linux/kvm.h | 1 + 2 files changed, 21 insertions(+)
arch/s390/kvm/kvm-s390.c +20 -0
@@ -606,6 +606,26 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_S390_PROTECTED : r =is_prot_virt_host ();break ; +case KVM_CAP_S390_PROTECTED_DUMP : { +u64 pv_cmds_dump[] = { +BIT_UVC_CMD_DUMP_INIT , +BIT_UVC_CMD_DUMP_CONFIG_STOR_STATE , +BIT_UVC_CMD_DUMP_CPU , +BIT_UVC_CMD_DUMP_COMPLETE , + }; +int i; + +if (!is_prot_virt_host ()) +return 0 ; + + r =1 ; +for (i =0 ; i <ARRAY_SIZE (pv_cmds_dump); i++) { +if (!test_bit_inv (pv_cmds_dump[i], + (unsigned long *)&uv_info.inst_calls_list)) +return 0 ; + } +break ; + }default : r =0 ; }
include/uapi/linux/kvm.h +1 -0
@@ -1152,6 +1152,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_DISABLE_QUIRKS2 213/* #define KVM_CAP_VM_TSC_CONTROL 214 */ #define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_S390_PROTECTED_DUMP 216#ifdef KVM_CAP_IRQ_ROUTING
Signature · 1 line
2.34.1
Claudio Imbrenda
maintainerRe: [PATCH v5 08/10] kvm: s390: Add KVM_CAP_S390_PROTECTED_DUMP
Quoted 17 lines · On Mon, 16 May 2022 09:08:15 +0000 Janosch Frank <[email protected]> wrote:
The capability indicates dump support for protected VMs.
Signed-off-by Janosch Frank <[email protected]>--- arch/s390/kvm/kvm-s390.c | 20 ++++++++++++++++++++ include/uapi/linux/kvm.h | 1 + 2 files changed, 21 insertions(+)arch/s390/kvm/kvm-s390.c +1
-0@@ -606,6 +606,26 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_S390_PROTECTED : r =is_prot_virt_host ();break ; +case KVM_CAP_S390_PROTECTED_DUMP : {
arch/s390/kvm/kvm-s390.c int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) · line 619
Quoted 10 lines
arch/s390/kvm/kvm-s390.c +10
-0+u64 pv_cmds_dump[] = { +BIT_UVC_CMD_DUMP_INIT , +BIT_UVC_CMD_DUMP_CONFIG_STOR_STATE , +BIT_UVC_CMD_DUMP_CPU , +BIT_UVC_CMD_DUMP_COMPLETE , + }; +int i; + +if (!is_prot_virt_host ()) +return 0 ;
we don't return usually in this function, can you use break instad? or maybe even something simpler like this:
r = is_prot_virt_host();
for (i = 0; r && i < ARRAY_SIZE(...); i++)
r = r && test_bit_inv(...);
Quoted 24 lines
arch/s390/kvm/kvm-s390.c +9
-0+ + r =1 ; +for (i =0 ; i <ARRAY_SIZE (pv_cmds_dump); i++) { +if (!test_bit_inv (pv_cmds_dump[i], + (unsigned long *)&uv_info.inst_calls_list)) +return 0 ; + } +break ; + }default : r =0 ; }include/uapi/linux/kvm.h +1
-0@@ -1152,6 +1152,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_DISABLE_QUIRKS2 213/* #define KVM_CAP_VM_TSC_CONTROL 214 */ #define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_S390_PROTECTED_DUMP 216#ifdef KVM_CAP_IRQ_ROUTING
Janosch Frank
maintainerPATCH v5 9/10 Documentation: virt: Protected virtual machine dumps
In reply to Janosch FrankLet's add a documentation file which describes the dump process. Since we only copy the UV dump data from the UV to userspace we'll not go into detail here and let the party which processes the data describe its structure.
--- Documentation/virt/kvm/s390/index.rst | 1 + Documentation/virt/kvm/s390/s390-pv-dump.rst | 64 ++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/virt/kvm/s390/s390-pv-dump.rst
Documentation/virt/kvm/s390/index.rst +1 -0
@@ -10,3 +10,4 @@ KVM for s390 systems s390-diag s390-pv s390-pv-boot + s390-pv-dump
Documentation/virt/kvm/s390/s390-pv-dump.rst new file +64 -0
64 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v5 09/10] Documentation: virt: Protected virtual machine dumps
Quoted 6 lines · On Mon, 16 May 2022 09:08:16 +0000 Janosch Frank <[email protected]> wrote:
Let's add a documentation file which describes the dump process. Since we only copy the UV dump data from the UV to userspace we'll not go into detail here and let the party which processes the data describe its structure.
Signed-off-by Janosch Frank <[email protected]>
Quoted 85 lines
--- Documentation/virt/kvm/s390/index.rst | 1 + Documentation/virt/kvm/s390/s390-pv-dump.rst | 64 ++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/virt/kvm/s390/s390-pv-dump.rstDocumentation/virt/kvm/s390/index.rst +1
-0@@ -10,3 +10,4 @@ KVM for s390 systems s390-diag s390-pv s390-pv-boot + s390-pv-dumpDocumentation/virt/kvm/s390/s390-pv-dump.rst new file +64
-0@@ -0,0 +1,64 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +s390 (IBM Z) Protected Virtualization dumps +=========================================== + +Summary +------- + +Dumping a VM is an essential tool for debugging problems inside +it. This is especially true when a protected VM runs into trouble as +there's no way to access its memory and registers from the outside +while it's running. + +However when dumping a protected VM we need to maintain its +confidentiality until the dump is in the hands of the VM owner who +should be the only one capable of analysing it. + +The confidentiality of the VM dump is ensured by the Ultravisor who +provides an interface to KVM over which encrypted CPU and memory data +can be requested. The encryption is based on the Customer +Communication Key which is the key that's used to encrypt VM data in a +way that the customer is able to decrypt. + + +Dump process +------------ + +A dump is done in 3 steps: + +**Initiation** + +This step initializes the dump process, generates cryptographic seeds +and extracts dump keys with which the VM dump data will be encrypted. + +**Data gathering** + +Currently there are two types of data that can be gathered from a VM: +the memory and the vcpu state. + +The vcpu state contains all the important registers, general, floating +point, vector, control and tod/timers of a vcpu. The vcpu dump can +contain incomplete data if a vcpu is dumped while an instruction is +emulated with help of the hypervisor. This is indicated by a flag bit +in the dump data. For the same reason it is very important to not only +write out the encrypted vcpu state, but also the unencrypted state +from the hypervisor. + +The memory state is further divided into the encrypted memory and its +metadata comprised of the encryption tweaks and status flags. The +encrypted memory can simply be read once it has been exported. The +time of the export does not matter as no re-encryption is +needed. Memory that has been swapped out and hence was exported can be +read from the swap and written to the dump target without need for any +special actions. + +The tweaks / status flags for the exported pages need to be requested +from the Ultravisor. + +**Finalization** + +The finalization step will provide the data needed to be able to +decrypt the vcpu and memory data and end the dump process. When this +step completes successfully a new dump initiation can be started.
Janosch Frank
maintainerPATCH v5 10/10 Documentation/virt/kvm/api.rst: Add protvirt dump/info api descriptions
In reply to Janosch FrankTime to add the dump API changes to the api documentation file. Also some minor cleanup.
--- Documentation/virt/kvm/api.rst | 153 ++++++++++++++++++++++++++++++++- 1 file changed, 151 insertions(+), 2 deletions(-)
Documentation/virt/kvm/api.rst +151 -2
@@ -5061,7 +5061,7 @@ into ESA mode. This reset is a superset of the initial reset. __u32 reserved[3]; }; -cmd values: +**cmd values:** KVM_PV_ENABLE Allocate memory and register the VM with the Ultravisor, thereby
@@ -5077,7 +5077,6 @@ KVM_PV_ENABLE ===== ============================= KVM_PV_DISABLE - Deregister the VM from the Ultravisor and reclaim the memory that had been donated to the Ultravisor, making it usable by the kernel again. All registered VCPUs are converted back to non-protected
@@ -5094,6 +5093,115 @@ KVM_PV_VM_VERIFY Verify the integrity of the unpacked image. Only if this succeeds, KVM is allowed to start protected VCPUs. +KVM_PV_INFO + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides Ultravisor related data to userspace + via subcommands. len_max is the size of the user space buffer, + len_written is KVM's indication of how much bytes of that buffer + were actually written to. len_written can be used to determine the + valid fields if more response fields are added in the future. + + :: + + enum pv_cmd_info_id { + KVM_PV_INFO_VM, + KVM_PV_INFO_DUMP, + }; + + struct kvm_s390_pv_info_header { + __u32 id; + __u32 len_max; + __u32 len_written; + __u32 reserved; + }; + + struct kvm_s390_pv_info { + struct kvm_s390_pv_info_header header; + struct kvm_s390_pv_info_dump dump; + struct kvm_s390_pv_info_vm vm; + }; + +**subcommands:** + + KVM_PV_INFO_VM + This subcommand provides basic Ultravisor information for PV + hosts. These values are likely also exported as files in the sysfs + firmware UV query interface but they are more easily available to + programs in this API. + + The installed calls and feature_indication members provide the + installed UV calls and the UV's other feature indications. + + The max_* members provide information about the maximum number of PV + vcpus, PV guests and PV guest memory size. + + :: + + struct kvm_s390_pv_info_vm { + __u64 inst_calls_list[4]; + __u64 max_cpus; + __u64 max_guests; + __u64 max_guest_addr; + __u64 feature_indication; + }; + + + KVM_PV_INFO_DUMP + This subcommand provides information related to dumping PV guests. + + :: + + struct kvm_s390_pv_info_dump { + __u64 dump_cpu_buffer_len; + __u64 dump_config_mem_buffer_per_1m; + __u64 dump_config_finalize_len; + }; + +KVM_PV_DUMP + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides calls which facilitate dumping a + protected VM. + + :: + + struct kvm_s390_pv_dmp { + __u64 subcmd; + __u64 buff_addr; + __u64 buff_len; + __u64 gaddr; /* For dump storage state */ + }; + + **subcommands:** + + KVM_PV_DUMP_INIT + Initializes the dump process of a protected VM. If this call does + not succeed all other subcommands will fail with -EINVAL. This + subcommand will return -EINVAL if a dump process has not yet been + completed. + + Not all PV vms can be dumped, the owner needs to set `dump + allowed` PCF bit 34 in the SE header to allow dumping. + + KVM_PV_DUMP_CONFIG_STOR_STATE + Stores `buff_len` bytes of tweak component values starting with + the 1MB block specified by the absolute guest address + (`gaddr`). `buff_len` needs to be `conf_dump_storage_state_len` + aligned and at least >= the `conf_dump_storage_state_len` value + provided by the dump uv_info data. + + KVM_PV_DUMP_COMPLETE + If the subcommand succeeds it completes the dump process and lets + KVM_PV_DUMP_INIT be called again. + + On success `conf_dump_finalize_len` bytes of completion data will be + stored to the `buff_addr`. The completion data contains a key + derivation seed, IV, tweak nonce and encryption keys as well as an + authentication tag all of which are needed to decrypt the dump at a + later time. + + 4.126 KVM_X86_SET_MSR_FILTER ----------------------------
@@ -5646,6 +5754,32 @@ The offsets of the state save areas in struct kvm_xsave follow the contents of CPUID leaf 0xD on the host. +4.135 KVM_S390_PV_CPU_COMMAND +----------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, < 0 on error + +This ioctl closely mirrors `KVM_S390_PV_COMMAND` but handles requests +for vcpus. It re-uses the kvm_s390_pv_dmp struct and hence also shares +the command ids. + +**command:** + +KVM_PV_DUMP + Presents an API that provides calls which facilitate dumping a vcpu + of a protected VM. + +**subcommand:** + +KVM_PV_DUMP_CPU + Provides encrypted dump data like register values. + The length of the returned data is provided by uv_info.guest_cpu_stor_len. + + 5. The kvm_run structure ========================
@@ -7734,6 +7868,21 @@ At this time, KVM_PMU_CAP_DISABLE is the only capability. Setting this capability will disable PMU virtualization for that VM. Usermode should adjust CPUID leaf 0xA to reflect that the PMU is disabled. + +8.36 KVM_CAP_S390_PROTECTED_DUMP +-------------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vm + +This capability indicates that KVM and the Ultravisor support dumping +PV guests. The `KVM_PV_DUMP` command is available for the +`KVM_S390_PV_COMMAND` ioctl and the `KVM_PV_INFO` command provides +dump related UV data. Also the vcpu ioctl `KVM_S390_PV_CPU_COMMAND` is +available and supports the `KVM_PV_DUMP_CPU` subcommand. + + 9. Known KVM API problems =========================
Signature · 1 line
2.34.1
Claudio Imbrenda
maintainerRe: [PATCH v5 10/10] Documentation/virt/kvm/api.rst: Add protvirt dump/info api descriptions
Quoted 120 lines · On Mon, 16 May 2022 09:08:17 +0000 Janosch Frank <[email protected]> wrote:
Time to add the dump API changes to the api documentation file. Also some minor cleanup.
Signed-off-by Janosch Frank <[email protected]>--- Documentation/virt/kvm/api.rst | 153 ++++++++++++++++++++++++++++++++- 1 file changed, 151 insertions(+), 2 deletions(-)Documentation/virt/kvm/api.rst +88
-2@@ -5061,7 +5061,7 @@ into ESA mode. This reset is a superset of the initial reset. __u32 reserved[3]; }; -cmd values: +**cmd values:** KVM_PV_ENABLE Allocate memory and register the VM with the Ultravisor, thereby@@ -5077,7 +5077,6 @@ KVM_PV_ENABLE ===== ============================= KVM_PV_DISABLE - Deregister the VM from the Ultravisor and reclaim the memory that had been donated to the Ultravisor, making it usable by the kernel again. All registered VCPUs are converted back to non-protected@@ -5094,6 +5093,115 @@ KVM_PV_VM_VERIFY Verify the integrity of the unpacked image. Only if this succeeds, KVM is allowed to start protected VCPUs. +KVM_PV_INFO + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides Ultravisor related data to userspace + via subcommands. len_max is the size of the user space buffer, + len_written is KVM's indication of how much bytes of that buffer + were actually written to. len_written can be used to determine the + valid fields if more response fields are added in the future. + + :: + + enum pv_cmd_info_id { + KVM_PV_INFO_VM, + KVM_PV_INFO_DUMP, + }; + + struct kvm_s390_pv_info_header { + __u32 id; + __u32 len_max; + __u32 len_written; + __u32 reserved; + }; + + struct kvm_s390_pv_info { + struct kvm_s390_pv_info_header header; + struct kvm_s390_pv_info_dump dump; + struct kvm_s390_pv_info_vm vm; + }; + +**subcommands:** + + KVM_PV_INFO_VM + This subcommand provides basic Ultravisor information for PV + hosts. These values are likely also exported as files in the sysfs + firmware UV query interface but they are more easily available to + programs in this API. + + The installed calls and feature_indication members provide the + installed UV calls and the UV's other feature indications. + + The max_* members provide information about the maximum number of PV + vcpus, PV guests and PV guest memory size. + + :: + + struct kvm_s390_pv_info_vm { + __u64 inst_calls_list[4]; + __u64 max_cpus; + __u64 max_guests; + __u64 max_guest_addr; + __u64 feature_indication; + }; + + + KVM_PV_INFO_DUMP + This subcommand provides information related to dumping PV guests. + + :: + + struct kvm_s390_pv_info_dump { + __u64 dump_cpu_buffer_len; + __u64 dump_config_mem_buffer_per_1m; + __u64 dump_config_finalize_len; + }; + +KVM_PV_DUMP + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides calls which facilitate dumping a + protected VM. + + :: + + struct kvm_s390_pv_dmp { + __u64 subcmd; + __u64 buff_addr; + __u64 buff_len; + __u64 gaddr; /* For dump storage state */ + }; + + **subcommands:** + + KVM_PV_DUMP_INIT + Initializes the dump process of a protected VM. If this call does + not succeed all other subcommands will fail with -EINVAL. This + subcommand will return -EINVAL if a dump process has not yet been + completed.
Documentation/virt/kvm/api.rst KVM_PV_VM_VERIFY · line 5192
Quoted 10 lines
Documentation/virt/kvm/api.rst +10
-0+ + Not all PV vms can be dumped, the owner needs to set `dump + allowed` PCF bit 34 in the SE header to allow dumping. + + KVM_PV_DUMP_CONFIG_STOR_STATE + Stores `buff_len` bytes of tweak component values starting with + the 1MB block specified by the absolute guest address + (`gaddr`). `buff_len` needs to be `conf_dump_storage_state_len` + aligned and at least >= the `conf_dump_storage_state_len` value + provided by the dump uv_info data.
please explain that the output buffer might be written to (even partially) even when the IOCTL fails
Quoted 70 lines
Documentation/virt/kvm/api.rst +53
-0+ + KVM_PV_DUMP_COMPLETE + If the subcommand succeeds it completes the dump process and lets + KVM_PV_DUMP_INIT be called again. + + On success `conf_dump_finalize_len` bytes of completion data will be + stored to the `buff_addr`. The completion data contains a key + derivation seed, IV, tweak nonce and encryption keys as well as an + authentication tag all of which are needed to decrypt the dump at a + later time. + + 4.126 KVM_X86_SET_MSR_FILTER ----------------------------@@ -5646,6 +5754,32 @@ The offsets of the state save areas in struct kvm_xsave follow the contents of CPUID leaf 0xD on the host. +4.135 KVM_S390_PV_CPU_COMMAND +----------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, < 0 on error + +This ioctl closely mirrors `KVM_S390_PV_COMMAND` but handles requests +for vcpus. It re-uses the kvm_s390_pv_dmp struct and hence also shares +the command ids. + +**command:** + +KVM_PV_DUMP + Presents an API that provides calls which facilitate dumping a vcpu + of a protected VM. + +**subcommand:** + +KVM_PV_DUMP_CPU + Provides encrypted dump data like register values. + The length of the returned data is provided by uv_info.guest_cpu_stor_len. + + 5. The kvm_run structure ========================@@ -7734,6 +7868,21 @@ At this time, KVM_PMU_CAP_DISABLE is the only capability. Setting this capability will disable PMU virtualization for that VM. Usermode should adjust CPUID leaf 0xA to reflect that the PMU is disabled. + +8.36 KVM_CAP_S390_PROTECTED_DUMP +-------------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vm + +This capability indicates that KVM and the Ultravisor support dumping +PV guests. The `KVM_PV_DUMP` command is available for the +`KVM_S390_PV_COMMAND` ioctl and the `KVM_PV_INFO` command provides +dump related UV data. Also the vcpu ioctl `KVM_S390_PV_CPU_COMMAND` is +available and supports the `KVM_PV_DUMP_CPU` subcommand. + + 9. Known KVM API problems =========================