USB: serial: pl2303: fix type detection for odd device

At least one pl2303 device has a bcdUSB of 1.0.1 which most likely was was intended as 1.1.

Allow bcdDevice 1.0.1 but interpret it as 1.1.

---

Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.01

  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x067b Prolific Technology, Inc.
  idProduct          0x2303 PL2303 Serial Port
  bcdDevice            3.00
  iManufacturer           1 Prolific Technology Inc.
  iProduct                2 USB-Serial Controller
  iSerial                 0 
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0027
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

 drivers/usb/serial/pl2303.c | 3 +++
 1 file changed, 3 insertions(+)

index 1d878d05a658..3506c47e1eef 100644
@@ -421,6 +421,9 @@ static int pl2303_detect_type(struct usb_serial *serial)
 	bcdUSB = le16_to_cpu(desc->bcdUSB);
 
 	switch (bcdUSB) {
+	case 0x101:
+		/* USB 1.0.1? Let's assume they meant 1.1... */
+		fallthrough;
 	case 0x110:
 		switch (bcdDevice) {
 		case 0x300:

2.35.1