mlx5 updates 2022-05-17
Subsystems (5)
From: Saeed Mahameed <[email protected]>
This series adds misc updates and Multi "uplink" port eswitch support For more information please see tag log below.
Please pull and let me know if there is any problem.
There will be a minor conflict, mostly contextual when net-next is merged with the current mlx5 net PR [1], I will provide resolution details if necessary.
[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=642587
Thanks,
Saeed.
The following changes since commit 6e144b47f560edc25744498f360835b1042b73dd:
octeontx2-pf: Add support for adaptive interrupt coalescing (2022-05-17 18:05:28 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-updates-2022-05-17
for you to fetch changes up to 94db3317781922ba52722c58061e0e8517d4d80d:
net/mlx5: Support multiport eswitch mode (2022-05-17 23:41:51 -0700)
----------------------------------------------------------------
mlx5-updates-2022-05-17
MISC updates to mlx5 dirver
1) Aya Levin allows relaxed ordering over VFs
2) Gal Pressman Adds support XDP SQs for uplink representors in switchdev mode
3) Add debugfs TC stats and command failure syndrome for debuggability
4) Tariq uses variants of vzalloc where it could help
5) Multiport eswitch support from Elic Cohen:
Eli Cohen Says:
===============
The multiport eswitch feature allows to forward traffic from a representor net device to the uplink port of an associated eswitch's uplink port.
This feature requires creating a LAG object. Since LAG can be created only once for a function, the feature is mutual exclusive with either bonding or multipath.
Multipath eswitch mode is entered automatically these conditions are met:
1. No other LAG related mode is active.
2. A rule that explicitly forwards to an uplink port is inserted.
The implementation maintains a reference count on such rules. When the reference count reaches zero, the LAG is released and other modes may be used.
When an explicit rule that explicitly forwards to an uplink port is inserted while another LAG mode is active, that rule will not be offloaded by the hardware since the hardware cannot guarantee that the rule will actually be forwarded to that port.
Example rules that forwards to an uplink port is:
$ tc filter add dev rep0 root flower action mirred egress \ redirect dev uplinkrep0
$ tc filter add dev rep0 root flower action mirred egress \ redirect dev uplinkrep1
This feature is supported only if LAG_RESOURCE_ALLOCATION firmware configuration parameter is set to true.
The series consists of three patches:
1. Lag state machine refactor
This patch does not add new functionality but rather changes the way the state of the LAG is maintained.
2. Small fix to remove unused argument.
3. The actual implementation of the feature.
===============
----------------------------------------------------------------
Aya Levin (1):
net/mlx5e: Allow relaxed ordering over VFs
Eli Cohen (3):
net/mlx5: Lag, refactor lag state machine
net/mlx5: Remove unused argument
net/mlx5: Support multiport eswitch mode
Gal Pressman (3):
net/mlx5e: IPoIB, Improve ethtool rxnfc callback structure in IPoIB net/mlx5e: Support partial GSO for tunnels over vlans net/mlx5e: Add XDP SQs to uplink representors steering tables
Moshe Shemesh (1):
net/mlx5: Add last command failure syndrome to debugfs
Moshe Tal (1):
net/mlx5e: Correct the calculation of max channels for rep
Saeed Mahameed (2):
net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev' net/mlx5e: CT: Add ct driver counters
Tariq Toukan (5):
net/mlx5: Inline db alloc API function
net/mlx5: Allocate virtually contiguous memory in vport.c net/mlx5: Allocate virtually contiguous memory in pci_irq.c net/mlx5e: Allocate virtually contiguous memory for VLANs list net/mlx5e: Allocate virtually contiguous memory for reps structures
drivers/net/ethernet/mellanox/mlx5/core/Makefile | 2 +- drivers/net/ethernet/mellanox/mlx5/core/alloc.c | 6 - drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 7 +- drivers/net/ethernet/mellanox/mlx5/core/debugfs.c | 2 + drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + .../net/ethernet/mellanox/mlx5/core/en/params.c | 3 +- .../ethernet/mellanox/mlx5/core/en/tc/act/mirred.c | 14 ++ drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 52 +++++- .../net/ethernet/mellanox/mlx5/core/en_common.c | 5 +- drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 4 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 11 +- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 35 +++- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 28 ++- drivers/net/ethernet/mellanox/mlx5/core/en_tc.h | 7 + .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 + .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 14 +- .../net/ethernet/mellanox/mlx5/core/lag/debugfs.c | 21 +-- drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 192 +++++++++++++-------- drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h | 41 +++-- drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c | 4 +- .../net/ethernet/mellanox/mlx5/core/lag/mpesw.c | 101 +++++++++++ .../net/ethernet/mellanox/mlx5/core/lag/mpesw.h | 26 +++ drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 - drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 8 +- drivers/net/ethernet/mellanox/mlx5/core/vport.c | 52 +++--- include/linux/mlx5/driver.h | 9 +- include/linux/mlx5/mlx5_ifc.h | 5 +- 27 files changed, 489 insertions(+), 166 deletions(-) create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h
PATCH 1/16 net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev'
From: Saeed Mahameed <[email protected]>
Removing the annotation resolves the issue for some reason.
--- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 -- 1 file changed, 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -2
@@ -1886,7 +1886,6 @@ static struct pci_driver mlx5_core_driver = {* Return: Pointer to the associated mlx5_core_dev or NULL. */ struct mlx5_core_dev *mlx5_vf_get_core_dev (struct pci_dev *pdev) - __acquires(&mdev->intf_state_mutex) {struct mlx5_core_dev *mdev;
@@ -1912,7 +1911,6 @@ EXPORT_SYMBOL(mlx5_vf_get_core_dev);* access the mdev any more. */ void mlx5_vf_put_core_dev (struct mlx5_core_dev *mdev) - __releases(&mdev->intf_state_mutex) {mutex_unlock (&mdev->intf_state_mutex); }
Signature · 1 line
2.36.1
PATCH 2/16 net/mlx5: Add last command failure syndrome to debugfs
In reply to Saeed MahameedFrom: Moshe Shemesh <[email protected]>
Add syndrome of last command failure per command type to debugfs to ease debugging of such failure.last_failed_syndrome - last command failed syndrome returned by FW.
--- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 7 +++++-- drivers/net/ethernet/mellanox/mlx5/core/debugfs.c | 2 ++ include/linux/mlx5/driver.h | 2 ++ 3 files changed, 9 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/cmd.c +5 -2
@@ -1887,7 +1887,8 @@ static int cmd_exec(struct mlx5_core_dev *dev, void *in, int in_size, void *out,return err; } -static void cmd_status_log (struct mlx5_core_dev *dev,u16 opcode,u8 status,int err) +static void cmd_status_log (struct mlx5_core_dev *dev,u16 opcode,u8 status, +u32 syndrome,int err) {struct mlx5_cmd_stats *stats;
@@ -1902,6 +1903,7 @@ static void cmd_status_log(struct mlx5_core_dev *dev, u16 opcode, u8 status, intif (err == -EREMOTEIO ) { stats->failed_mbox_status++; stats->last_failed_mbox_status = status; + stats->last_failed_syndrome = syndrome; }spin_unlock_irq (&stats->lock); }
@@ -1909,6 +1911,7 @@ static void cmd_status_log(struct mlx5_core_dev *dev, u16 opcode, u8 status, int/* preserve -EREMOTEIO for outbox.status != OK, otherwise return err as is */ static int cmd_status_err (struct mlx5_core_dev *dev,int err,u16 opcode,void *out) { +u32 syndrome =MLX5_GET (mbox_out, out, syndrome);u8 status =MLX5_GET (mbox_out, out, status);if (err == -EREMOTEIO )/* -EREMOTEIO is preserved */
@@ -1917,7 +1920,7 @@ static int cmd_status_err(struct mlx5_core_dev *dev, int err, u16 opcode, void *if (!err && status !=MLX5_CMD_STAT_OK ) err = -EREMOTEIO ; -cmd_status_log (dev, opcode, status, err); +cmd_status_log (dev, opcode, status, syndrome, err);return err; }
drivers/net/ethernet/mellanox/mlx5/core/debugfs.c +2 -0
@@ -192,6 +192,8 @@ void mlx5_cmdif_debugfs_init(struct mlx5_core_dev *dev) &stats->last_failed_errno);debugfs_create_u8 ("last_failed_mbox_status" ,0400 , stats->root, &stats->last_failed_mbox_status); +debugfs_create_x32 ("last_failed_syndrome" ,0400 , stats->root, + &stats->last_failed_syndrome); } } }
include/linux/mlx5/driver.h +2 -0
@@ -272,6 +272,8 @@ struct mlx5_cmd_stats {u32 last_failed_errno;/* last bad status returned by FW */ u8 last_failed_mbox_status; +/* last command failed syndrome returned by FW */ +u32 last_failed_syndrome;struct dentry *root;/* protect command average calculations */ spinlock_t lock;
Signature · 1 line
2.36.1
PATCH 3/16 net/mlx5: Inline db alloc API function
In reply to Saeed MahameedFrom: Tariq Toukan <[email protected]>
Take the wrapper version which picks default node into a header file. This reduces the number of exported functions.
--- drivers/net/ethernet/mellanox/mlx5/core/alloc.c | 6 ------ include/linux/mlx5/driver.h | 7 ++++++- 2 files changed, 6 insertions(+), 7 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/alloc.c +0 -6
@@ -213,12 +213,6 @@ int mlx5_db_alloc_node(struct mlx5_core_dev *dev, struct mlx5_db *db, int node) }EXPORT_SYMBOL_GPL (mlx5_db_alloc_node); -int mlx5_db_alloc (struct mlx5_core_dev *dev,struct mlx5_db *db) -{ -return mlx5_db_alloc_node (dev, db, dev->priv.numa_node); -} -EXPORT_SYMBOL_GPL (mlx5_db_alloc); -void mlx5_db_free (struct mlx5_core_dev *dev,struct mlx5_db *db) {u32 db_per_page =PAGE_SIZE /cache_line_size ();
include/linux/mlx5/driver.h +6 -1
@@ -1053,9 +1053,14 @@ int mlx5_core_access_reg(struct mlx5_core_dev *dev, void *data_in, int size_in, void *data_out, int size_out, u16 reg_num, int arg, int write); -int mlx5_db_alloc (struct mlx5_core_dev *dev,struct mlx5_db *db);int mlx5_db_alloc_node (struct mlx5_core_dev *dev,struct mlx5_db *db,int node); + +static inline int mlx5_db_alloc (struct mlx5_core_dev *dev,struct mlx5_db *db) +{ +return mlx5_db_alloc_node (dev, db, dev->priv.numa_node); +} +void mlx5_db_free (struct mlx5_core_dev *dev,struct mlx5_db *db);const char *mlx5_command_str (int command);
Signature · 1 line
2.36.1
PATCH 4/16 net/mlx5: Allocate virtually contiguous memory in vport.c
In reply to Saeed MahameedFrom: Tariq Toukan <[email protected]>
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE.
Hence, use v-alloc/free API.
--- .../net/ethernet/mellanox/mlx5/core/vport.c | 52 +++++++++---------- 1 file changed, 26 insertions(+), 26 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/vport.c +26 -26
@@ -280,7 +280,7 @@ int mlx5_query_nic_vport_mac_list(struct mlx5_core_dev *dev, out_sz =MLX5_ST_SZ_BYTES (query_nic_vport_context_in) + req_list_size *MLX5_ST_SZ_BYTES (mac_address_layout); - out =kzalloc (out_sz,GFP_KERNEL ); + out =kvzalloc (out_sz,GFP_KERNEL );if (!out)return -ENOMEM ;
@@ -307,7 +307,7 @@ int mlx5_query_nic_vport_mac_list(struct mlx5_core_dev *dev,ether_addr_copy (addr_list[i], mac_addr); } out: -kfree (out); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_query_nic_vport_mac_list);
@@ -335,7 +335,7 @@ int mlx5_modify_nic_vport_mac_list(struct mlx5_core_dev *dev, in_sz =MLX5_ST_SZ_BYTES (modify_nic_vport_context_in) + list_size *MLX5_ST_SZ_BYTES (mac_address_layout); - in =kzalloc (in_sz,GFP_KERNEL ); + in =kvzalloc (in_sz,GFP_KERNEL );if (!in)return -ENOMEM ;
@@ -360,7 +360,7 @@ int mlx5_modify_nic_vport_mac_list(struct mlx5_core_dev *dev, } err =mlx5_cmd_exec (dev, in, in_sz, out,sizeof (out)); -kfree (in); +kvfree (in);return err; }EXPORT_SYMBOL_GPL (mlx5_modify_nic_vport_mac_list);
@@ -386,7 +386,7 @@ int mlx5_modify_nic_vport_vlans(struct mlx5_core_dev *dev,list_size *MLX5_ST_SZ_BYTES (vlan_layout );memset (out,0 ,sizeof (out)); - in =kzalloc (in_sz,GFP_KERNEL ); + in =kvzalloc (in_sz,GFP_KERNEL );if (!in)return -ENOMEM ;
@@ -411,7 +411,7 @@ int mlx5_modify_nic_vport_vlans(struct mlx5_core_dev *dev, } err =mlx5_cmd_exec (dev, in, in_sz, out,sizeof (out)); -kfree (in); +kvfree (in);return err; }EXPORT_SYMBOL_GPL (mlx5_modify_nic_vport_vlans);
@@ -542,8 +542,8 @@ int mlx5_query_hca_vport_gid(struct mlx5_core_dev *dev, u8 other_vport, out_sz += nout *sizeof (*gid); - in =kzalloc (in_sz,GFP_KERNEL ); - out =kzalloc (out_sz,GFP_KERNEL ); + in =kvzalloc (in_sz,GFP_KERNEL ); + out =kvzalloc (out_sz,GFP_KERNEL );if (!in || !out) { err = -ENOMEM ; goto out;
@@ -573,8 +573,8 @@ int mlx5_query_hca_vport_gid(struct mlx5_core_dev *dev, u8 other_vport, gid->global.interface_id = tmp->global.interface_id; out: -kfree (in); -kfree (out); +kvfree (in); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_query_hca_vport_gid);
@@ -607,8 +607,8 @@ int mlx5_query_hca_vport_pkey(struct mlx5_core_dev *dev, u8 other_vport, out_sz += nout *MLX5_ST_SZ_BYTES (pkey); - in =kzalloc (in_sz,GFP_KERNEL ); - out =kzalloc (out_sz,GFP_KERNEL ); + in =kvzalloc (in_sz,GFP_KERNEL ); + out =kvzalloc (out_sz,GFP_KERNEL );if (!in || !out) { err = -ENOMEM ; goto out;
@@ -638,8 +638,8 @@ int mlx5_query_hca_vport_pkey(struct mlx5_core_dev *dev, u8 other_vport, *pkey =MLX5_GET_PR (pkey, pkarr, pkey); out: -kfree (in); -kfree (out); +kvfree (in); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_query_hca_vport_pkey);
@@ -658,7 +658,7 @@ int mlx5_query_hca_vport_context(struct mlx5_core_dev *dev, is_group_manager =MLX5_CAP_GEN (dev, vport_group_manager); - out =kzalloc (out_sz,GFP_KERNEL ); + out =kvzalloc (out_sz,GFP_KERNEL );if (!out)return -ENOMEM ;
@@ -717,7 +717,7 @@ int mlx5_query_hca_vport_context(struct mlx5_core_dev *dev, system_image_guid); ex: -kfree (out); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_query_hca_vport_context);
@@ -728,7 +728,7 @@ int mlx5_query_hca_vport_system_image_guid(struct mlx5_core_dev *dev,struct mlx5_hca_vport_context *rep;int err; - rep =kzalloc (sizeof (*rep),GFP_KERNEL ); + rep =kvzalloc (sizeof (*rep),GFP_KERNEL );if (!rep)return -ENOMEM ;
@@ -736,7 +736,7 @@ int mlx5_query_hca_vport_system_image_guid(struct mlx5_core_dev *dev,if (!err) *sys_image_guid = rep->sys_image_guid; -kfree (rep); +kvfree (rep);return err; }EXPORT_SYMBOL_GPL (mlx5_query_hca_vport_system_image_guid);
@@ -747,7 +747,7 @@ int mlx5_query_hca_vport_node_guid(struct mlx5_core_dev *dev,struct mlx5_hca_vport_context *rep;int err; - rep =kzalloc (sizeof (*rep),GFP_KERNEL ); + rep =kvzalloc (sizeof (*rep),GFP_KERNEL );if (!rep)return -ENOMEM ;
@@ -755,7 +755,7 @@ int mlx5_query_hca_vport_node_guid(struct mlx5_core_dev *dev,if (!err) *node_guid = rep->node_guid; -kfree (rep); +kvfree (rep);return err; }EXPORT_SYMBOL_GPL (mlx5_query_hca_vport_node_guid);
@@ -770,7 +770,7 @@ int mlx5_query_nic_vport_promisc(struct mlx5_core_dev *mdev,int outlen =MLX5_ST_SZ_BYTES (query_nic_vport_context_out);int err; - out =kzalloc (outlen,GFP_KERNEL ); + out =kvzalloc (outlen,GFP_KERNEL );if (!out)return -ENOMEM ;
@@ -786,7 +786,7 @@ int mlx5_query_nic_vport_promisc(struct mlx5_core_dev *mdev, nic_vport_context.promisc_all); out: -kfree (out); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_query_nic_vport_promisc);
@@ -874,7 +874,7 @@ int mlx5_nic_vport_query_local_lb(struct mlx5_core_dev *mdev, bool *status)int value;int err; - out =kzalloc (outlen,GFP_KERNEL ); + out =kvzalloc (outlen,GFP_KERNEL );if (!out)return -ENOMEM ;
@@ -891,7 +891,7 @@ int mlx5_nic_vport_query_local_lb(struct mlx5_core_dev *mdev, bool *status) *status = !value; out: -kfree (out); +kvfree (out);return err; }EXPORT_SYMBOL_GPL (mlx5_nic_vport_query_local_lb);
@@ -1033,7 +1033,7 @@ int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev,mlx5_core_dbg (dev,"vf %d\n" , vf); is_group_manager =MLX5_CAP_GEN (dev, vport_group_manager); - in =kzalloc (in_sz,GFP_KERNEL ); + in =kvzalloc (in_sz,GFP_KERNEL );if (!in)return -ENOMEM ;
@@ -1065,7 +1065,7 @@ int mlx5_core_modify_hca_vport_context(struct mlx5_core_dev *dev, req->cap_mask1_perm); err =mlx5_cmd_exec_in (dev, modify_hca_vport_context, in); ex: -kfree (in); +kvfree (in);return err; }EXPORT_SYMBOL_GPL (mlx5_core_modify_hca_vport_context);
Signature · 1 line
2.36.1
PATCH 5/16 net/mlx5: Allocate virtually contiguous memory in pci_irq.c
In reply to Saeed MahameedFrom: Tariq Toukan <[email protected]>
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE.
Hence, use v-alloc/free API.
--- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +4 -4
@@ -94,8 +94,8 @@ int mlx5_set_msix_vec_count(struct mlx5_core_dev *dev, int function_id,if (msix_vec_count > max_msix)return -EOVERFLOW ; - query_cap =kzalloc (query_sz,GFP_KERNEL ); - hca_cap =kzalloc (set_sz,GFP_KERNEL ); + query_cap =kvzalloc (query_sz,GFP_KERNEL ); + hca_cap =kvzalloc (set_sz,GFP_KERNEL );if (!hca_cap || !query_cap) { ret = -ENOMEM ; goto out;
@@ -118,8 +118,8 @@ int mlx5_set_msix_vec_count(struct mlx5_core_dev *dev, int function_id, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE << 1); ret =mlx5_cmd_exec_in (dev, set_hca_cap, hca_cap); out: -kfree (hca_cap); -kfree (query_cap); +kvfree (hca_cap); +kvfree (query_cap);return ret; }
Signature · 1 line
2.36.1
PATCH 7/16 net/mlx5e: Allocate virtually contiguous memory for reps structures
In reply to Saeed MahameedFrom: Tariq Toukan <[email protected]>
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE.
Hence, use v-alloc/free API.
--- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +6 -6
@@ -412,8 +412,8 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) MLX5E_GET_PFLAG(&priv->channels.params, MLX5E_PFLAG_TX_PORT_TS)); nch = priv->channels.num + ptp_sq; - sqs =kcalloc (nch *mlx5e_get_dcb_num_tc (&priv->channels.params),sizeof (*sqs), -GFP_KERNEL ); + sqs =kvcalloc (nch *mlx5e_get_dcb_num_tc (&priv->channels.params),sizeof (*sqs), +GFP_KERNEL );if (!sqs) goto out;
@@ -430,7 +430,7 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) } err =mlx5e_sqs2vport_start (esw, rep, sqs, num_sqs); -kfree (sqs); +kvfree (sqs); out:if (err)
@@ -1269,7 +1269,7 @@ mlx5e_vport_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep)struct mlx5e_rep_priv *rpriv;int err; - rpriv =kzalloc (sizeof (*rpriv),GFP_KERNEL ); + rpriv =kvzalloc (sizeof (*rpriv),GFP_KERNEL );if (!rpriv)return -ENOMEM ;
@@ -1284,7 +1284,7 @@ mlx5e_vport_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep) err =mlx5e_vport_vf_rep_load (dev, rep);if (err) -kfree (rpriv); +kvfree (rpriv);return err; }
@@ -1312,7 +1312,7 @@ mlx5e_vport_rep_unload(struct mlx5_eswitch_rep *rep) priv->profile->cleanup (priv);mlx5e_destroy_netdev (priv); free_ppriv: -kfree (ppriv);/* mlx5e_rep_priv */ +kvfree (ppriv);/* mlx5e_rep_priv */ }static void *mlx5e_vport_rep_get_proto_dev (struct mlx5_eswitch_rep *rep)
Signature · 1 line
2.36.1
PATCH 8/16 net/mlx5e: IPoIB, Improve ethtool rxnfc callback structure in IPoIB
In reply to Saeed MahameedFrom: Gal Pressman <[email protected]>
Followup commit79ce39be1d63 ("net/mlx5e: Improve ethtool rxnfc callback structure") and handle CONFIG_MLX5_EN_RXNFC enabled/disabled inside the fs layer so the ethtool callbacks are always available. The fs layer will provide stubs when CONFIG_MLX5_EN_RXNFC is compiled out.
--- .../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c +10 -4
@@ -221,7 +221,6 @@ static int mlx5i_get_link_ksettings(struct net_device *netdev,return 0 ; } -#ifdef CONFIG_MLX5_EN_RXNFC static u32 mlx5i_flow_type_mask (u32 flow_type) {return flow_type & ~(FLOW_EXT |FLOW_MAC_EXT |FLOW_RSS );
@@ -243,9 +242,18 @@ static int mlx5i_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, {struct mlx5e_priv *priv =mlx5i_epriv (dev); +/* ETHTOOL_GRXRINGS is needed by ethtool -x which is not part +* of rxnfc. We keep this logic out of mlx5e_ethtool_get_rxnfc, +* to avoid breaking "ethtool -x" when mlx5e_ethtool_get_rxnfc +* is compiled out via CONFIG_MLX5_EN_RXNFC=n. +*/ +if (info->cmd ==ETHTOOL_GRXRINGS ) { + info->data = priv->channels.params.num_channels; +return 0 ; + } +return mlx5e_ethtool_get_rxnfc (priv, info, rule_locs); } -#endif const struct ethtool_ops mlx5i_ethtool_ops = { .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
@@ -263,10 +271,8 @@ const struct ethtool_ops mlx5i_ethtool_ops = { .get_coalesce = mlx5i_get_coalesce, .set_coalesce = mlx5i_set_coalesce, .get_ts_info = mlx5i_get_ts_info, -#ifdef CONFIG_MLX5_EN_RXNFC .get_rxnfc = mlx5i_get_rxnfc, .set_rxnfc = mlx5i_set_rxnfc, -#endif .get_link_ksettings = mlx5i_get_link_ksettings, .get_link = ethtool_op_get_link, };
Signature · 1 line
2.36.1
PATCH 6/16 net/mlx5e: Allocate virtually contiguous memory for VLANs list
In reply to Saeed MahameedFrom: Tariq Toukan <[email protected]>
Physical continuity is not necessary, and requested allocation size might be larger than PAGE_SIZE.
Hence, use v-alloc/free API.
--- drivers/net/ethernet/mellanox/mlx5/core/en_fs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c +2 -2
@@ -155,7 +155,7 @@ static int mlx5e_vport_context_update_vlans(struct mlx5e_priv *priv) list_size = max_list_size; } - vlans =kcalloc (list_size,sizeof (*vlans),GFP_KERNEL ); + vlans =kvcalloc (list_size,sizeof (*vlans),GFP_KERNEL );if (!vlans)return -ENOMEM ;
@@ -171,7 +171,7 @@ static int mlx5e_vport_context_update_vlans(struct mlx5e_priv *priv)netdev_err (ndev,"Failed to modify vport vlans list err(%d)\n" , err); -kfree (vlans); +kvfree (vlans);return err; }
Signature · 1 line
2.36.1
PATCH 9/16 net/mlx5e: Support partial GSO for tunnels over vlans
In reply to Saeed MahameedFrom: Gal Pressman <[email protected]>
Offloading outer checksum on tunnels requires GSO partial, add it to 'vlan_features' to allow offloading tunnels over vlans. For example, running GENEVE over vlan & ipv6 (mandatory UDP checksum) now allows for hardware TSO instead of software segmentation in GSO only.
--- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +1 -1
@@ -4812,6 +4812,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) netdev->vlan_features |=NETIF_F_TSO6 ; netdev->vlan_features |=NETIF_F_RXCSUM ; netdev->vlan_features |=NETIF_F_RXHASH ; + netdev->vlan_features |=NETIF_F_GSO_PARTIAL ; netdev->mpls_features |=NETIF_F_SG ; netdev->mpls_features |=NETIF_F_HW_CSUM ;
@@ -4877,7 +4878,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)NETIF_F_GSO_IPXIP6 ; } - netdev->hw_features |=NETIF_F_GSO_PARTIAL ; netdev->gso_partial_features |=NETIF_F_GSO_UDP_L4 ; netdev->hw_features |=NETIF_F_GSO_UDP_L4 ; netdev->features |=NETIF_F_GSO_UDP_L4 ;
Signature · 1 line
2.36.1
PATCH 10/16 net/mlx5e: Allow relaxed ordering over VFs
In reply to Saeed MahameedFrom: Aya Levin <[email protected]>
By PCI spec, the config space of the VF always report relaxed ordering not supported while it inherits this property from its PF. Hence using pcie_relaxed_ordering_enable(), always disables the relaxed ordering on all VFs. Remove this check and rely on the firmware which queries the config space of the PF and set the capability bit accordingly.
--- drivers/net/ethernet/mellanox/mlx5/core/en/params.c | 3 +-- drivers/net/ethernet/mellanox/mlx5/core/en_common.c | 5 ++--- 2 files changed, 3 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/params.c +1 -2
@@ -565,8 +565,7 @@ static void mlx5e_build_rx_cq_param(struct mlx5_core_dev *mdev,static u8 rq_end_pad_mode (struct mlx5_core_dev *mdev,struct mlx5e_params *params) {bool lro_en = params->packet_merge.type ==MLX5E_PACKET_MERGE_LRO ; -bool ro =pcie_relaxed_ordering_enabled (mdev->pdev) && -MLX5_CAP_GEN (mdev, relaxed_ordering_write); +bool ro =MLX5_CAP_GEN (mdev, relaxed_ordering_write);return ro && lro_en ?MLX5_WQ_END_PAD_MODE_NONE :MLX5_WQ_END_PAD_MODE_ALIGN ;
drivers/net/ethernet/mellanox/mlx5/core/en_common.c +2 -3
@@ -38,12 +38,11 @@void mlx5e_mkey_set_relaxed_ordering (struct mlx5_core_dev *mdev,void *mkc) { -bool ro_pci_enable =pcie_relaxed_ordering_enabled (mdev->pdev);bool ro_write =MLX5_CAP_GEN (mdev, relaxed_ordering_write);bool ro_read =MLX5_CAP_GEN (mdev, relaxed_ordering_read); -MLX5_SET (mkc, mkc, relaxed_ordering_read, ro_pci_enable && ro_read); -MLX5_SET (mkc, mkc, relaxed_ordering_write, ro_pci_enable && ro_write); +MLX5_SET (mkc, mkc, relaxed_ordering_read, ro_read); +MLX5_SET (mkc, mkc, relaxed_ordering_write, ro_write); } static int mlx5e_create_mkey(struct mlx5_core_dev *mdev, u32 pdn,
Signature · 1 line
2.36.1
PATCH 13/16 net/mlx5e: Add XDP SQs to uplink representors steering tables
In reply to Saeed MahameedFrom: Gal Pressman <[email protected]>
This patch adds the XDP SQs to the uplink representors steering tables in swichdev mode and enables XDP usage on them.
--- .../net/ethernet/mellanox/mlx5/core/en_rep.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +15 -2
@@ -399,7 +399,9 @@ static int mlx5e_sqs2vport_start(struct mlx5_eswitch *esw,int mlx5e_add_sqs_fwd_rules (struct mlx5e_priv *priv) { +int sqs_per_channel =mlx5e_get_dcb_num_tc (&priv->channels.params);struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; +bool is_uplink_rep =mlx5e_is_uplink_rep (priv);struct mlx5e_rep_priv *rpriv = priv->ppriv;struct mlx5_eswitch_rep *rep = rpriv->rep;int n, tc, nch, num_sqs =0 ;
@@ -411,9 +413,13 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) ptp_sq = !!(priv->channels.ptp &&MLX5E_GET_PFLAG (&priv->channels.params,MLX5E_PFLAG_TX_PORT_TS )); nch = priv->channels.num + ptp_sq; +/* +2 for xdpsqs, they don't exist on the ptp channel but will not be +* counted for by num_sqs. +*/ +if (is_uplink_rep) + sqs_per_channel +=2 ; - sqs =kvcalloc (nch *mlx5e_get_dcb_num_tc (&priv->channels.params),sizeof (*sqs), -GFP_KERNEL ); + sqs =kvcalloc (nch * sqs_per_channel,sizeof (*sqs),GFP_KERNEL );if (!sqs) goto out;
@@ -421,6 +427,13 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) c = priv->channels.c[n];for (tc =0 ; tc < c->num_tc; tc++) sqs[num_sqs++] = c->sq[tc].sqn; + +if (is_uplink_rep) { +if (c->xdp) + sqs[num_sqs++] = c->rq_xdpsq.sqn; + + sqs[num_sqs++] = c->xdpsq.sqn; + } }if (ptp_sq) {struct mlx5e_ptp *ptp_ch = priv->channels.ptp;
Signature · 1 line
2.36.1
PATCH 11/16 net/mlx5e: CT: Add ct driver counters
In reply to Saeed MahameedFrom: Saeed Mahameed <[email protected]>
Connection offload is translated to multiple rules over several hardware flow tables. Unhandled end-cases may cause a hardware resource leak causing multiple system symptoms such as a host memory leak, decreased performance and other scale related issues.
Export the current number of firmware FTEs related to the CT table as a debugfs counter. Also add a dropped packets counter to help debug packets dropped on restore failure.
To show the offloaded count:
cat /sys/kernel/debug/mlx5/<PCI>/ct_nic/offloaded
To show the dropped count:
cat /sys/kernel/debug/mlx5/<PCI>/ct_nic/rx_dropped
--- .../ethernet/mellanox/mlx5/core/en/tc_ct.c | 52 +++++++++++++++++-- 1 file changed, 48 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c +48 -4
@@ -15,6 +15,7 @@#include <linux/refcount.h> #include <linux/xarray.h> #include <linux/if_macvlan.h> +#include <linux/debugfs.h> #include "lib/fs_chains.h" #include "en/tc_ct.h"
@@ -47,6 +48,15 @@ #define ct_dbg(fmt, args...)\ netdev_dbg(ct_priv->netdev, "ct_debug: " fmt "\n", ##args) +struct mlx5_tc_ct_debugfs { +struct { +atomic_t offloaded; +atomic_t rx_dropped; + } stats; + +struct dentry *root; +}; +struct mlx5_tc_ct_priv {struct mlx5_core_dev *dev;const struct net_device *netdev;
@@ -66,6 +76,8 @@ struct mlx5_tc_ct_priv {struct mlx5_ct_fs *fs;struct mlx5_ct_fs_ops *fs_ops;spinlock_t ht_lock;/* protects ft entries */ + +struct mlx5_tc_ct_debugfs debugfs; };struct mlx5_ct_flow {
@@ -520,6 +532,8 @@ mlx5_tc_ct_entry_del_rules(struct mlx5_tc_ct_priv *ct_priv, {mlx5_tc_ct_entry_del_rule (ct_priv, entry, true);mlx5_tc_ct_entry_del_rule (ct_priv, entry, false); + +atomic_dec (&ct_priv->debugfs.stats.offloaded); } static struct flow_action_entry *
@@ -1040,6 +1054,7 @@ mlx5_tc_ct_entry_add_rules(struct mlx5_tc_ct_priv *ct_priv,if (err) goto err_nat; +atomic_inc (&ct_priv->debugfs.stats.offloaded);return 0 ; err_nat:
@@ -2064,6 +2079,29 @@ mlx5_tc_ct_init_check_support(struct mlx5e_priv *priv,return err; } +static void +mlx5_ct_tc_create_dbgfs (struct mlx5_tc_ct_priv *ct_priv) +{ +bool is_fdb = ct_priv->ns_type ==MLX5_FLOW_NAMESPACE_FDB ; +struct mlx5_tc_ct_debugfs *ct_dbgfs = &ct_priv->debugfs; +char dirname[16 ] = {}; + +if (sscanf (dirname,"ct_%s" , is_fdb ?"fdb" :"nic" ) <0 ) +return ; + + ct_dbgfs->root =debugfs_create_dir (dirname,mlx5_debugfs_get_dev_root (ct_priv->dev)); +debugfs_create_atomic_t ("offloaded" ,0400 , ct_dbgfs->root, + &ct_dbgfs->stats.offloaded); +debugfs_create_atomic_t ("rx_dropped" ,0400 , ct_dbgfs->root, + &ct_dbgfs->stats.rx_dropped); +} + +static void +mlx5_ct_tc_remove_dbgfs (struct mlx5_tc_ct_priv *ct_priv) +{ +debugfs_remove_recursive (ct_priv->debugfs.root); +} +#define INIT_ERR_PREFIX "tc ct offload init failed" struct mlx5_tc_ct_priv *
@@ -2139,6 +2177,7 @@ mlx5_tc_ct_init(struct mlx5e_priv *priv, struct mlx5_fs_chains *chains,if (err) goto err_init_fs; +mlx5_ct_tc_create_dbgfs (ct_priv);return ct_priv; err_init_fs:
@@ -2171,6 +2210,7 @@ mlx5_tc_ct_clean(struct mlx5_tc_ct_priv *ct_priv)if (!ct_priv)return ; +mlx5_ct_tc_remove_dbgfs (ct_priv); chains = ct_priv->chains; ct_priv->fs_ops->destroy (ct_priv->fs);
@@ -2200,22 +2240,22 @@ mlx5e_tc_ct_restore_flow(struct mlx5_tc_ct_priv *ct_priv,return true;if (mapping_find (ct_priv->zone_mapping, zone_restore_id, &zone)) -return false; + goto out_inc_drop;if (!mlx5_tc_ct_skb_to_tuple (skb, &tuple, zone)) -return false; + goto out_inc_drop;spin_lock (&ct_priv->ht_lock); entry =mlx5_tc_ct_entry_get (ct_priv, &tuple);if (!entry) {spin_unlock (&ct_priv->ht_lock); -return false; + goto out_inc_drop; }if (IS_ERR (entry)) {spin_unlock (&ct_priv->ht_lock); -return false; + goto out_inc_drop; }spin_unlock (&ct_priv->ht_lock);
@@ -2223,4 +2263,8 @@ mlx5e_tc_ct_restore_flow(struct mlx5_tc_ct_priv *ct_priv,__mlx5_tc_ct_entry_put (entry);return true; + +out_inc_drop: +atomic_inc (&ct_priv->debugfs.stats.rx_dropped); +return false; }
Signature · 1 line
2.36.1
PATCH 12/16 net/mlx5e: Correct the calculation of max channels for rep
In reply to Saeed MahameedFrom: Moshe Tal <[email protected]>
Correct the calculation of maximum channels of rep to better utilize the hardware resources and allow a larger scale of reps.
This will allow creation of all virtual ports configured.
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++++++++ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 10 ++++++++-- 3 files changed, 18 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +1 -0
@@ -1220,6 +1220,7 @@ mlx5e_tx_mpwqe_supported(struct mlx5_core_dev *mdev)MLX5_CAP_ETH (mdev, enhanced_multi_pkt_send_wqe); } +int mlx5e_get_pf_num_tirs (struct mlx5_core_dev *mdev); int mlx5e_priv_init(struct mlx5e_priv *priv, const struct mlx5e_profile *profile, struct net_device *netdev,
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +9 -0
@@ -5221,6 +5221,15 @@ mlx5e_calc_max_nch(struct mlx5_core_dev *mdev, struct net_device *netdev,return max_nch; } +int mlx5e_get_pf_num_tirs (struct mlx5_core_dev *mdev) +{ +/* Indirect TIRS: 2 sets of TTCs (inner + outer steering) +* and 1 set of direct TIRS +*/ +return 2 *MLX5E_NUM_INDIR_TIRS + +mlx5e_profile_max_num_channels (mdev, &mlx5e_nic_profile); +} +/* mlx5e generic netdev management API (move to en_common.c) */ int mlx5e_priv_init(struct mlx5e_priv *priv, const struct mlx5e_profile *profile,
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +8 -2
@@ -604,10 +604,16 @@ bool mlx5e_eswitch_vf_rep(const struct net_device *netdev)return netdev->netdev_ops == &mlx5e_netdev_ops_rep; } +/* One indirect TIR set for outer. Inner not supported in reps. */ +#define REP_NUM_INDIR_TIRS MLX5E_NUM_INDIR_TIRS +static int mlx5e_rep_max_nch_limit (struct mlx5_core_dev *mdev) { -return (1 <<MLX5_CAP_GEN (mdev, log_max_tir)) / -mlx5_eswitch_get_total_vports (mdev); +int max_tir_num =1 <<MLX5_CAP_GEN (mdev, log_max_tir); +int num_vports =mlx5_eswitch_get_total_vports (mdev); + +return (max_tir_num -mlx5e_get_pf_num_tirs (mdev) + - (num_vports *REP_NUM_INDIR_TIRS )) / num_vports; }static void mlx5e_build_rep_params (struct net_device *netdev)
Signature · 1 line
2.36.1
PATCH 14/16 net/mlx5: Lag, refactor lag state machine
In reply to Saeed MahameedFrom: Eli Cohen <[email protected]>
LAG state machine is implemented using bit flags. However, all these bit flags, except for MLX5_LAG_FLAG_HASH_BASED, are really mutual exclusive.
In addition, MLX5_LAG_FLAG_READY is used by bonding to mark if we have our netdevices successfully added to lag and does not really belong in the same flags variable as the other flags.
Rename MLX5_LAG_FLAG_READY to MLX5_LAG_FLAG_NDEVS_READY to better reflect its purpose and put it in a new flags variable.
For the rest of the flags, we introduce a mode enum to hold the state of the LAG.
Remove the shared fdb boolean flag from struct mlx5_lag and store this configuration as a mode flag.
Change all flag related operations to use standard Linux APIs.
--- .../ethernet/mellanox/mlx5/core/lag/debugfs.c | 12 +- .../net/ethernet/mellanox/mlx5/core/lag/lag.c | 112 +++++++++++------- .../net/ethernet/mellanox/mlx5/core/lag/lag.h | 33 +++--- .../net/ethernet/mellanox/mlx5/core/lag/mp.c | 4 +- 4 files changed, 93 insertions(+), 68 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c +6 -6
@@ -5,11 +5,11 @@static char *get_str_mode_type (struct mlx5_lag *ldev) { -if (ldev->flags &MLX5_LAG_FLAG_ROCE ) +if (ldev->mode ==MLX5_LAG_MODE_ROCE )return "roce" ; -if (ldev->flags &MLX5_LAG_FLAG_SRIOV ) +if (ldev->mode ==MLX5_LAG_MODE_SRIOV )return "switchdev" ; -if (ldev->flags &MLX5_LAG_FLAG_MULTIPATH ) +if (ldev->mode ==MLX5_LAG_MODE_MULTIPATH )return "multipath" ;return NULL ;
@@ -43,7 +43,7 @@ static int port_sel_mode_show(struct seq_file *file, void *priv) ldev = dev->priv.lag;mutex_lock (&ldev->lock);if (__mlx5_lag_is_active (ldev)) - mode =get_str_port_sel_mode (ldev->flags); + mode =get_str_port_sel_mode (ldev->mode_flags);else ret = -EINVAL ;mutex_unlock (&ldev->lock);
@@ -79,7 +79,7 @@ static int flags_show(struct seq_file *file, void *priv)mutex_lock (&ldev->lock); lag_active =__mlx5_lag_is_active (ldev);if (lag_active) - shared_fdb = ldev->shared_fdb; + shared_fdb =test_bit (MLX5_LAG_MODE_FLAG_SHARED_FDB , &ldev->mode_flags);mutex_unlock (&ldev->lock);if (!lag_active)
@@ -103,7 +103,7 @@ static int mapping_show(struct seq_file *file, void *priv)mutex_lock (&ldev->lock); lag_active =__mlx5_lag_is_active (ldev);if (lag_active) { -if (ldev->flags &MLX5_LAG_FLAG_HASH_BASED ) { +if (test_bit (MLX5_LAG_MODE_FLAG_HASH_BASED , &ldev->mode_flags)) {mlx5_infer_tx_enabled (&ldev->tracker, ldev->ports, ports, &num_ports); hash = true;
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +66 -46
295 lines not on this page · raw message
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h +19 -14
@@ -17,16 +17,20 @@ enum { };enum { -MLX5_LAG_FLAG_ROCE =1 <<0 , -MLX5_LAG_FLAG_SRIOV =1 <<1 , -MLX5_LAG_FLAG_MULTIPATH =1 <<2 , -MLX5_LAG_FLAG_READY =1 <<3 , -MLX5_LAG_FLAG_HASH_BASED =1 <<4 , +MLX5_LAG_FLAG_NDEVS_READY , }; -#define MLX5_LAG_MODE_FLAGS (MLX5_LAG_FLAG_ROCE | MLX5_LAG_FLAG_SRIOV |\ - MLX5_LAG_FLAG_MULTIPATH | \ - MLX5_LAG_FLAG_HASH_BASED) +enum { +MLX5_LAG_MODE_FLAG_HASH_BASED , +MLX5_LAG_MODE_FLAG_SHARED_FDB , +}; + +enum mlx5_lag_mode { +MLX5_LAG_MODE_NONE , +MLX5_LAG_MODE_ROCE , +MLX5_LAG_MODE_SRIOV , +MLX5_LAG_MODE_MULTIPATH , +};struct lag_func {struct mlx5_core_dev *dev;
@@ -47,11 +51,12 @@ struct lag_tracker {* It serves both its phys functions. */ struct mlx5_lag { -u8 flags; +enum mlx5_lag_mode mode; +unsigned long mode_flags; +unsigned long state_flags;u8 ports;u8 buckets;int mode_changes_in_progress; -bool shared_fdb;u8 v2p_map[MLX5_MAX_PORTS *MLX5_LAG_MAX_HASH_BUCKETS ];struct kref ref;struct lag_func pf[MLX5_MAX_PORTS ];
@@ -74,25 +79,25 @@ mlx5_lag_dev(struct mlx5_core_dev *dev)static inline bool __mlx5_lag_is_active (struct mlx5_lag *ldev) { -return !!(ldev->flags &MLX5_LAG_MODE_FLAGS ); +return ldev->mode !=MLX5_LAG_MODE_NONE ; }static inline bool mlx5_lag_is_ready (struct mlx5_lag *ldev) { -return ldev->flags &MLX5_LAG_FLAG_READY ; +return test_bit (MLX5_LAG_FLAG_NDEVS_READY , &ldev->state_flags); }void mlx5_modify_lag (struct mlx5_lag *ldev,struct lag_tracker *tracker);int mlx5_activate_lag (struct mlx5_lag *ldev,struct lag_tracker *tracker, -u8 flags, +enum mlx5_lag_mode mode,bool shared_fdb);int mlx5_lag_dev_get_netdev_idx (struct mlx5_lag *ldev,struct net_device *ndev); -char *get_str_port_sel_mode (u8 flags); +char *get_str_port_sel_mode (unsigned long flags);void mlx5_infer_tx_enabled (struct lag_tracker *tracker,u8 num_ports,u8 *ports,int *num_enabled);
drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c +2 -2
@@ -11,7 +11,7 @@static bool __mlx5_lag_is_multipath (struct mlx5_lag *ldev) { -return !!(ldev->flags &MLX5_LAG_FLAG_MULTIPATH ); +return ldev->mode ==MLX5_LAG_MODE_MULTIPATH ; }static bool mlx5_lag_multipath_check_prereq (struct mlx5_lag *ldev)
@@ -179,7 +179,7 @@ static void mlx5_lag_fib_route_event(struct mlx5_lag *ldev, unsigned long event,struct lag_tracker tracker; tracker = ldev->tracker; -mlx5_activate_lag (ldev, &tracker,MLX5_LAG_FLAG_MULTIPATH , false); +mlx5_activate_lag (ldev, &tracker,MLX5_LAG_MODE_MULTIPATH , false); }mlx5_lag_set_port_affinity (ldev,MLX5_LAG_NORMAL_AFFINITY );
Signature · 1 line
2.36.1
PATCH 15/16 net/mlx5: Remove unused argument
In reply to Saeed MahameedFrom: Eli Cohen <[email protected]>
Argument ndev is not used in mlx5_handle_changeupper_event() Remove it.
--- drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +1 -3
@@ -850,7 +850,6 @@ static void mlx5_do_bond_work(struct work_struct *work)static int mlx5_handle_changeupper_event (struct mlx5_lag *ldev,struct lag_tracker *tracker, -struct net_device *ndev,struct netdev_notifier_changeupper_info *info) {struct net_device *upper = info->upper_dev, *ndev_tmp;
@@ -1006,8 +1005,7 @@ static int mlx5_lag_netdev_event(struct notifier_block *this,switch (event) {case NETDEV_CHANGEUPPER : - changed =mlx5_handle_changeupper_event (ldev, &tracker, ndev, - ptr); + changed =mlx5_handle_changeupper_event (ldev, &tracker, ptr);break ;case NETDEV_CHANGELOWERSTATE : changed = mlx5_handle_changelowerstate_event(ldev, &tracker,
Signature · 1 line
2.36.1
PATCH 16/16 net/mlx5: Support multiport eswitch mode
In reply to Saeed MahameedFrom: Eli Cohen <[email protected]>
Multiport eswitch mode is a LAG mode that allows to add rules that forward traffic to a specific physical port without being affected by LAG affinity configuration.
This mode of operation is mutual exclusive with the other LAG modes used by multipath and bonding.
To make the transition between the modes, we maintain a counter on the number of rules specifying one of the uplink representors as the target of mirred egress redirect action.
An example of such rule would be:
$ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \ 00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0
If the reference count just grows to one and LAG is not in use, we create the LAG in multiport eswitch mode. Other mode changes are not allowed while in this mode. When the reference count reaches zero, we destroy the LAG and let other modes be used if needed.
logic also changed such that if forwarding to some uplink destination cannot be guaranteed, we fail the operation so the rule will eventually be in software and not in hardware.
--- .../net/ethernet/mellanox/mlx5/core/Makefile | 2 +- .../mellanox/mlx5/core/en/tc/act/mirred.c | 14 +++ .../net/ethernet/mellanox/mlx5/core/en_tc.c | 28 ++++- .../net/ethernet/mellanox/mlx5/core/en_tc.h | 7 ++ .../mellanox/mlx5/core/eswitch_offloads.c | 3 + .../ethernet/mellanox/mlx5/core/lag/debugfs.c | 17 +-- .../net/ethernet/mellanox/mlx5/core/lag/lag.c | 86 ++++++++++----- .../net/ethernet/mellanox/mlx5/core/lag/lag.h | 10 +- .../ethernet/mellanox/mlx5/core/lag/mpesw.c | 101 ++++++++++++++++++ .../ethernet/mellanox/mlx5/core/lag/mpesw.h | 26 +++++ include/linux/mlx5/mlx5_ifc.h | 5 +- 11 files changed, 259 insertions(+), 40 deletions(-) create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h
drivers/net/ethernet/mellanox/mlx5/core/Makefile +1 -1
@@ -39,7 +39,7 @@ mlx5_core-$(CONFIG_MLX5_CORE_EN_DCB) += en_dcbnl.o en/port_buffer.o mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += en/hv_vhca_stats.o mlx5_core-$(CONFIG_MLX5_ESWITCH) += lag/mp.o lag/port_sel.o lib/geneve.o lib/port_tun.o \ en_rep.o en/rep/bond.o en/mod_hdr.o \ - en/mapping.o + en/mapping.o lag/mpesw.o mlx5_core-$(CONFIG_MLX5_CLS_ACT) += en_tc.o en/rep/tc.o en/rep/neigh.o \ lib/fs_chains.o en/tc_tun.o \ esw/indir_table.o en/tc_tun_encap.o \
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/mirred.c +14 -0
@@ -10,6 +10,7 @@#include "en/tc_tun_encap.h" #include "en/tc_priv.h" #include "en_rep.h" +#include "lag/lag.h" static bool same_vf_reps (struct mlx5e_priv *priv,struct net_device *out_dev)
@@ -215,6 +216,7 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state,struct net_device *uplink_dev;struct mlx5e_priv *out_priv;struct mlx5_eswitch *esw; +bool is_uplink_rep;int *ifindexes;int if_count;int err;
@@ -229,6 +231,10 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state, parse_state->ifindexes[if_count] = out_dev->ifindex; parse_state->if_count++; + is_uplink_rep =mlx5e_eswitch_uplink_rep (out_dev); + err =mlx5_lag_do_mirred (priv->mdev, out_dev); +if (err) +return err; out_dev =get_fdb_out_dev (uplink_dev, out_dev);if (!out_dev)
@@ -268,6 +274,14 @@ parse_mirred(struct mlx5e_tc_act_parse_state *parse_state, rpriv = out_priv->ppriv; esw_attr->dests[esw_attr->out_count].rep = rpriv->rep; esw_attr->dests[esw_attr->out_count].mdev = out_priv->mdev; + +/* If output device is bond master then rules are not explicit +* so we don't attempt to count them. +*/ +if (is_uplink_rep &&MLX5_CAP_PORT_SELECTION (priv->mdev, port_select_flow_table) && +MLX5_CAP_GEN (priv->mdev, create_lag_when_not_master_up)) + attr->lag.count = true; + esw_attr->out_count++;return 0 ;
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +27 -1
@@ -1740,6 +1740,9 @@ static void mlx5e_tc_del_fdb_flow(struct mlx5e_priv *priv,free_flow_post_acts (flow); +if (flow->attr->lag.count) +mlx5_lag_del_mpesw_rule (esw->dev); +kvfree (attr->esw_attr->rx_tun_attr);kvfree (attr->parse_attr);kfree (flow->attr);
@@ -3788,12 +3791,25 @@ static bool is_lag_dev(struct mlx5e_priv *priv, same_hw_reps(priv, peer_netdev)); } +static bool is_multiport_eligible (struct mlx5e_priv *priv,struct net_device *out_dev) +{ +if (mlx5e_eswitch_uplink_rep (out_dev) && +MLX5_CAP_PORT_SELECTION (priv->mdev, port_select_flow_table) && +MLX5_CAP_GEN (priv->mdev, create_lag_when_not_master_up)) +return true; + +return false; +} +bool mlx5e_is_valid_eswitch_fwd_dev (struct mlx5e_priv *priv,struct net_device *out_dev) {if (is_merged_eswitch_vfs (priv, out_dev))return true; +if (is_multiport_eligible (priv, out_dev)) +return true; +if (is_lag_dev (priv, out_dev))return true;
@@ -4050,6 +4066,7 @@ __mlx5e_add_fdb_flow(struct mlx5e_priv *priv, struct mlx5_core_dev *in_mdev) {struct flow_rule *rule =flow_cls_offload_flow_rule (f); +struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;struct netlink_ext_ack *extack = f->common.extack;struct mlx5e_tc_flow_parse_attr *parse_attr;struct mlx5e_tc_flow *flow;
@@ -4085,17 +4102,26 @@ __mlx5e_add_fdb_flow(struct mlx5e_priv *priv,if (err) goto err_free; +if (flow->attr->lag.count) { + err =mlx5_lag_add_mpesw_rule (esw->dev); +if (err) + goto err_free; + } + err =mlx5e_tc_add_fdb_flow (priv, flow, extack);complete_all (&flow->init_done);if (err) {if (!(err == -ENETUNREACH &&mlx5_lag_is_multipath (in_mdev))) - goto err_free; + goto err_lag;add_unready_flow (flow); }return flow; +err_lag: +if (flow->attr->lag.count) +mlx5_lag_del_mpesw_rule (esw->dev); err_free:mlx5e_flow_put (priv, flow); out:
drivers/net/ethernet/mellanox/mlx5/core/en_tc.h +7 -0
@@ -85,6 +85,13 @@ struct mlx5_flow_attr {u32 flags;struct list_head list;struct mlx5e_post_act_handle *post_act_handle; +struct { +/* Indicate whether the parsed flow should be counted for lag mode decision +* making +*/ +bool count; + } lag; +/* keep this union last */ union {struct mlx5_esw_flow_attr esw_attr[0 ];struct mlx5_nic_flow_attr nic_attr[0 ];
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +3 -0
@@ -49,6 +49,7 @@#include "en_tc.h" #include "en/mapping.h" #include "devlink.h" +#include "lag/lag.h" #define mlx5_esw_for_each_rep (esw, i, rep) \ xa_for_each(&((esw)->offloads.vport_reps), i, rep)
@@ -418,6 +419,8 @@ esw_setup_vport_dest(struct mlx5_flow_destination *dest, struct mlx5_flow_act *f dest[dest_idx].vport.vhca_id =MLX5_CAP_GEN (esw_attr->dests[attr_idx].mdev, vhca_id); dest[dest_idx].vport.flags |=MLX5_FLOW_DEST_VPORT_VHCA_ID ; +if (mlx5_lag_mpesw_is_activated (esw->dev)) + dest[dest_idx].type =MLX5_FLOW_DESTINATION_TYPE_UPLINK ; }if (esw_attr->dests[attr_idx].flags &MLX5_ESW_DEST_ENCAP ) {if (pkt_reformat) {
drivers/net/ethernet/mellanox/mlx5/core/lag/debugfs.c +9 -8
@@ -5,12 +5,13 @@static char *get_str_mode_type (struct mlx5_lag *ldev) { -if (ldev->mode ==MLX5_LAG_MODE_ROCE ) -return "roce" ; -if (ldev->mode ==MLX5_LAG_MODE_SRIOV ) -return "switchdev" ; -if (ldev->mode ==MLX5_LAG_MODE_MULTIPATH ) -return "multipath" ; +switch (ldev->mode) { +case MLX5_LAG_MODE_ROCE :return "roce" ; +case MLX5_LAG_MODE_SRIOV :return "switchdev" ; +case MLX5_LAG_MODE_MULTIPATH :return "multipath" ; +case MLX5_LAG_MODE_MPESW :return "multiport_eswitch" ; +default :return "invalid" ; + }return NULL ; }
@@ -43,11 +44,11 @@ static int port_sel_mode_show(struct seq_file *file, void *priv) ldev = dev->priv.lag;mutex_lock (&ldev->lock);if (__mlx5_lag_is_active (ldev)) - mode =get_str_port_sel_mode (ldev->mode_flags); + mode =mlx5_get_str_port_sel_mode (ldev);else ret = -EINVAL ;mutex_unlock (&ldev->lock); -if (ret || !mode) +if (ret)return ret;seq_printf (file,"%s\n" , mode);
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +59 -27
187 lines not on this page · raw message
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h +9 -1
@@ -10,6 +10,7 @@#include "mlx5_core.h" #include "mp.h" #include "port_sel.h" +#include "mpesw.h" enum {MLX5_LAG_P1 ,
@@ -30,6 +31,7 @@ enum mlx5_lag_mode {MLX5_LAG_MODE_ROCE ,MLX5_LAG_MODE_SRIOV ,MLX5_LAG_MODE_MULTIPATH , + MLX5_LAG_MODE_MPESW, }; struct lag_func {
@@ -63,11 +65,13 @@ struct mlx5_lag {struct lag_tracker tracker;struct workqueue_struct *wq;struct delayed_work bond_work; +struct work_struct mpesw_work;struct notifier_block nb;struct lag_mp lag_mp;struct mlx5_lag_port_sel port_sel;/* Protect lag fields/state changes */ struct mutex lock; +struct lag_mpesw lag_mpesw; }; static inline struct mlx5_lag *
@@ -96,12 +100,16 @@ int mlx5_activate_lag(struct mlx5_lag *ldev, bool shared_fdb);int mlx5_lag_dev_get_netdev_idx (struct mlx5_lag *ldev,struct net_device *ndev); +bool mlx5_shared_fdb_supported (struct mlx5_lag *ldev); +void mlx5_lag_del_mpesw_rule (struct mlx5_core_dev *dev); +int mlx5_lag_add_mpesw_rule (struct mlx5_core_dev *dev); -char *get_str_port_sel_mode (unsigned long flags); +char *mlx5_get_str_port_sel_mode (struct mlx5_lag *ldev);void mlx5_infer_tx_enabled (struct lag_tracker *tracker,u8 num_ports,u8 *ports,int *num_enabled);void mlx5_ldev_add_debugfs (struct mlx5_core_dev *dev);void mlx5_ldev_remove_debugfs (struct dentry *dbg); +void mlx5_disable_lag (struct mlx5_lag *ldev);#endif /* __MLX5_LAG_H__ */
drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c new file +101 -0
101 lines not on this page · raw message
drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.h new file +26 -0
@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ +/* Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES. All rights reserved. */ + +#ifndef __MLX5_LAG_MPESW_H__ +#define __MLX5_LAG_MPESW_H__ + +#include "lag.h" +#include "mlx5_core.h" + +struct lag_mpesw { +struct work_struct mpesw_work; +atomic_t mpesw_rule_count; +}; + +void mlx5_mpesw_work (struct work_struct *work); +int mlx5_lag_do_mirred (struct mlx5_core_dev *mdev,struct net_device *out_dev); +bool mlx5_lag_mpesw_is_activated (struct mlx5_core_dev *dev); +#if IS_ENABLED (CONFIG_MLX5_ESWITCH ) +void mlx5_lag_mpesw_init (struct mlx5_lag *ldev); +void mlx5_lag_mpesw_cleanup (struct mlx5_lag *ldev); +#else +void mlx5_lag_mpesw_init (struct mlx5_lag *ldev) {} +void mlx5_lag_mpesw_cleanup (struct mlx5_lag *ldev) {} +#endif + +#endif /* __MLX5_LAG_MPESW_H__ */
include/linux/mlx5/mlx5_ifc.h +3 -2
@@ -1359,7 +1359,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {u8 vhca_resource_manager[0x1 ];u8 hca_cap_2[0x1 ]; -u8 reserved_at_21[0x1 ]; +u8 create_lag_when_not_master_up[0x1 ];u8 dtor[0x1 ];u8 event_on_vhca_state_teardown_request[0x1 ];u8 event_on_vhca_state_in_use[0x1 ];
@@ -10816,7 +10816,8 @@ struct mlx5_ifc_dcbx_param_bits {enum {MLX5_LAG_PORT_SELECT_MODE_QUEUE_AFFINITY =0 , -MLX5_LAG_PORT_SELECT_MODE_PORT_SELECT_FT , +MLX5_LAG_PORT_SELECT_MODE_PORT_SELECT_FT =1 , +MLX5_LAG_PORT_SELECT_MODE_PORT_SELECT_MPESW =2 , };struct mlx5_ifc_lagc_bits {
Signature · 1 line
2.36.1
Re: [net-next 01/16] net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev'
In reply to Saeed MahameedThis series was applied to netdev/net-next.git (master) by Saeed Mahameed <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (master) by Saeed Mahameed <[email protected]>:
Quoted 8 lines · On Tue, 17 May 2022 23:49:23 -0700 you wrote:
From: Saeed Mahameed <[email protected]>
Removing the annotation resolves the issue for some reason.
Signed-off-by Saeed Mahameed <[email protected]>--- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 -- 1 file changed, 2 deletions(-)
Here is the summary with links:
- [net-next,01/16] net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev'
https://git.kernel.org/netdev/net-next/c/4c7c8a6d87a8 - [net-next,02/16] net/mlx5: Add last command failure syndrome to debugfs https://git.kernel.org/netdev/net-next/c/1d2c717bc7f7 - [net-next,03/16] net/mlx5: Inline db alloc API function https://git.kernel.org/netdev/net-next/c/9b45bde82c22 - [net-next,04/16] net/mlx5: Allocate virtually contiguous memory in vport.c https://git.kernel.org/netdev/net-next/c/773c104d5333 - [net-next,05/16] net/mlx5: Allocate virtually contiguous memory in pci_irq.c https://git.kernel.org/netdev/net-next/c/88468311c07a - [net-next,06/16] net/mlx5e: Allocate virtually contiguous memory for VLANs list https://git.kernel.org/netdev/net-next/c/035e0dd57392 - [net-next,07/16] net/mlx5e: Allocate virtually contiguous memory for reps structures https://git.kernel.org/netdev/net-next/c/597c11232619 - [net-next,08/16] net/mlx5e: IPoIB, Improve ethtool rxnfc callback structure in IPoIB https://git.kernel.org/netdev/net-next/c/675b9d51d6fb - [net-next,09/16] net/mlx5e: Support partial GSO for tunnels over vlans https://git.kernel.org/netdev/net-next/c/682adfa6ca80 - [net-next,10/16] net/mlx5e: Allow relaxed ordering over VFs https://git.kernel.org/netdev/net-next/c/f05ec8d9d0d6 - [net-next,11/16] net/mlx5e: CT: Add ct driver counters https://git.kernel.org/netdev/net-next/c/77422a8f6f61 - [net-next,12/16] net/mlx5e: Correct the calculation of max channels for rep https://git.kernel.org/netdev/net-next/c/6d0ba49321a4 - [net-next,13/16] net/mlx5e: Add XDP SQs to uplink representors steering tables https://git.kernel.org/netdev/net-next/c/65810a2d2ab3 - [net-next,14/16] net/mlx5: Lag, refactor lag state machine https://git.kernel.org/netdev/net-next/c/ef9a3a4a813a - [net-next,15/16] net/mlx5: Remove unused argument https://git.kernel.org/netdev/net-next/c/a4a9c87ebb68 - [net-next,16/16] net/mlx5: Support multiport eswitch mode https://git.kernel.org/netdev/net-next/c/94db33177819
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
Jakub Kicinski
maintainerRe: [net-next 16/16] net/mlx5: Support multiport eswitch mode
In reply to Saeed MahameedQuoted 23 lines · On Tue, 17 May 2022 23:49:38 -0700 Saeed Mahameed wrote:
From: Eli Cohen <[email protected]>
Multiport eswitch mode is a LAG mode that allows to add rules that forward traffic to a specific physical port without being affected by LAG affinity configuration.
This mode of operation is mutual exclusive with the other LAG modes used by multipath and bonding.
To make the transition between the modes, we maintain a counter on the number of rules specifying one of the uplink representors as the target of mirred egress redirect action.
An example of such rule would be:
$ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \ 00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0If the reference count just grows to one and LAG is not in use, we create the LAG in multiport eswitch mode. Other mode changes are not allowed while in this mode. When the reference count reaches zero, we destroy the LAG and let other modes be used if needed.
Quoted 7 lines
logic also changed such that if forwarding to some uplink destination cannot be guaranteed, we fail the operation so the rule will eventually be in software and not in hardware.
Signed-off-by Eli Cohen <[email protected]>Reviewed-by Mark Bloch <[email protected]>Signed-off-by Saeed Mahameed <[email protected]>
GCC 12 also points out that:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | struct lag_tracker tracker;
| ^~~~~~~drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: note: ‘tracker’ declared here
786 | struct lag_tracker tracker;
| ^~~~~~~
Saeed Mahameed
maintainerRe: [net-next 16/16] net/mlx5: Support multiport eswitch mode
Quoted 34 lines · Jakub Kicinski
Quoted 23 lines · On Tue, 17 May 2022 23:49:38 -0700 Saeed Mahameed wrote:
From: Eli Cohen <[email protected]>
Multiport eswitch mode is a LAG mode that allows to add rules that forward traffic to a specific physical port without being affected by LAG affinity configuration.
This mode of operation is mutual exclusive with the other LAG modes used by multipath and bonding.
To make the transition between the modes, we maintain a counter on the number of rules specifying one of the uplink representors as the target of mirred egress redirect action.
An example of such rule would be:
$ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \ 00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0If the reference count just grows to one and LAG is not in use, we create the LAG in multiport eswitch mode. Other mode changes are not allowed while in this mode. When the reference count reaches zero, we destroy the LAG and let other modes be used if needed.
Quoted 7 lines
logic also changed such that if forwarding to some uplink destination cannot be guaranteed, we fail the operation so the rule will eventually be in software and not in hardware.
Signed-off-by Eli Cohen <[email protected]>Reviewed-by Mark Bloch <[email protected]>Signed-off-by Saeed Mahameed <[email protected]>GCC 12 also points out that:
Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | structlag_trackertracker;
| ^~~~~~~drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: note: ‘tracker’ declared here
786 | structlag_trackertracker;
| ^~~~~~~
it's a false alarm, anyway clang and gcc12 are happy on my machine:
$ KCFLAGS="-Wall" make W=1 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.o CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CC drivers/net/ethernet/mellanox/mlx5/core/lag/lag.o
$ gcc --version gcc (GCC) 12.1.1 20220507 (Red Hat 12.1.1-1)
Jakub Kicinski
maintainerRe: [net-next 16/16] net/mlx5: Support multiport eswitch mode
Quoted 43 lines · On Wed, 18 May 2022 21:26:28 -0700 Saeed Mahameed wrote:
Quoted 34 lines · Jakub Kicinski
Quoted 23 lines · On Tue, 17 May 2022 23:49:38 -0700 Saeed Mahameed wrote:
From: Eli Cohen <[email protected]>
Multiport eswitch mode is a LAG mode that allows to add rules that forward traffic to a specific physical port without being affected by LAG affinity configuration.
This mode of operation is mutual exclusive with the other LAG modes used by multipath and bonding.
To make the transition between the modes, we maintain a counter on the number of rules specifying one of the uplink representors as the target of mirred egress redirect action.
An example of such rule would be:
$ tc filter add dev enp8s0f0_0 prot all root flower dst_mac \ 00:11:22:33:44:55 action mirred egress redirect dev enp8s0f0If the reference count just grows to one and LAG is not in use, we create the LAG in multiport eswitch mode. Other mode changes are not allowed while in this mode. When the reference count reaches zero, we destroy the LAG and let other modes be used if needed.
Quoted 7 lines
logic also changed such that if forwarding to some uplink destination cannot be guaranteed, we fail the operation so the rule will eventually be in software and not in hardware.
Signed-off-by Eli Cohen <[email protected]>Reviewed-by Mark Bloch <[email protected]>Signed-off-by Saeed Mahameed <[email protected]>GCC 12 also points out that:
Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | structlag_trackertracker;
| ^~~~~~~drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: note: ‘tracker’ declared here
786 | structlag_trackertracker;
| ^~~~~~~
Quoted 1 line
it's a false alarm, anyway clang and gcc12 are happy on my machine:
Yeah, looks like a false alarm.
Quoted 1 line
$ KCFLAGS="-Wall" make W=1 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.o
No extra flags, basic allmodconfig build here (well, with WERROR=n).
Quoted 7 lines
CALL
scripts/checksyscalls.sh
CALLscripts/atomic/check-atomics.sh
DESCEND objtool
CCdrivers/net/ethernet/mellanox/mlx5/core/lag/lag.o$ gcc --version gcc (GCC) 12.1.1 20220507 (Red Hat 12.1.1-1)
Same:
gcc (GCC) 12.1.1 20220507 (Red Hat 12.1.1-1)