Skip to contentSkip to conversation

dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'

PATCH In review Rob Herring 2 participants 2 messages May 19, 2022

Subsystems (6)
Device tree bindings Arm Qualcomm mailing list GPIO Pin control +2 more subsystems
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'

'wakeup-parent' is a single phandle and not an array, so 'maxItems' is wrong. Drop it.

Signed-off-by Rob Herring <[email protected]>
---
 .../devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml      | 3 +--
 .../devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml       | 3 +--
 .../devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml       | 3 +--
 .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml       | 3 +--
 .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml          | 1 -
 5 files changed, 4 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +1 -2
index 206f4f238736..3f4f1c0360b5 100644
@@ -42,8 +42,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +1 -2
index 6c7c3f6a140e..2d228164357c 100644
@@ -42,8 +42,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +1 -2
index cfcde405d30a..a7a2bb8bff46 100644
@@ -49,8 +49,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +1 -2
index cfa2c50fdb93..15bb1018cf21 100644
@@ -49,8 +49,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +0 -1
index 780f15bb5e40..c88c8dcb69d9 100644
@@ -42,7 +42,6 @@ properties:
     description:
       Specifying the interrupt-controller used to wake up the system when the
       TLMM block has been powered down.
-    maxItems: 1
 
   gpio-reserved-ranges:
     description:
Signature · 1 line
2.34.1