Skip to contentSkip to conversation

Add support for IBM Genesis3

PATCH Superseded Patrick Rudolph 1 participant 3 messages May 24, 2022

Subsystems (3)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#2 lore raw

PATCH v5 2/2 arm/mach-aspeed: Add support for CONFIG_ASPEED_ROUTE_UART5_TO_UART1

In reply to Patrick Rudolph

Introduce CONFIG_ASPEED_ROUTE_UART5_TO_UART1 and reuse existing platform code to route UART5 to UART1.
This is required on IBM/Genesis3 as it uses UART5 as debug uart, but the RXD1/TXD1 pins are connected instead of RXD5/TXD5.

---
 arch/arm/mach-aspeed/Kconfig            | 6 ++++++
 arch/arm/mach-aspeed/ast2500/platform.S | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)
arch/arm/mach-aspeed/Kconfig +6 -0
index edb5520aec..50ea261dac 100644
@@ -84,6 +84,12 @@ config ASPEED_ENABLE_DEBUG_UART
 
 endif
 
+config ASPEED_ROUTE_UART5_TO_UART1
+	bool "Route UART5 to UART1 pins"
+	depends on ASPEED_AST2500
+	help
+	  Route debug UART (UART5) to TXD1/RXD1 pins instead of TXD5/RXD5.
+
 config ASPEED_PALLADIUM
 	bool "Aspeed palladium for simulation"
 	default n
arch/arm/mach-aspeed/ast2500/platform.S +1 -1
index aef55c4a0a..fd013e4e6f 100644
@@ -795,7 +795,7 @@ wait_ddr_reset:
     /* end delay 10ms */
 
 /* Debug - UART console message */
-#ifdef CONFIG_DRAM_UART_TO_UART1
+#ifdef CONFIG_ASPEED_ROUTE_UART5_TO_UART1
     ldr   r0, =0x1e78909c                        @ route UART5 to UART Port1, 2016.08.29
     ldr   r1, =0x10000004
     str   r1, [r0]
Signature · 1 line
2.35.3
#0 lore raw

v5 cover Add support for IBM Genesis3

v5:
- Rename Kconfig and don't depend on ASPEED_ALLOW_DANGEROUS_BACKDOORS

v4:
- Rebase on upstream
- Drop defconfig and add it on openbmc instead
- Rename Kconfig for debug uart

v3:
- Drop FIRMWARE_2ND_BOOT patch
- Include reference board DTS instead of copying it
- Rename DTS to ast2500-<boardname>
- Describe defconfig changes in commit message

v2:
- Fix whitespace and compatible in DTS
- Remove board stub
- Improve commit message
- Rewrite FIRMWARE_2ND_BOOT support
- Update defconfig

Patrick Rudolph (2):
arm/dts: Add IBM Genesis3 board
arm/mach-aspeed: Add support for CONFIG_ASPEED_ROUTE_UART5_TO_UART1

 arch/arm/dts/Makefile                   |  1 +
 arch/arm/dts/ast2500-genesis3.dts       | 28 +++++++++++++++++++++++++
 arch/arm/mach-aspeed/Kconfig            |  6 ++++++
 arch/arm/mach-aspeed/ast2500/platform.S |  2 +-
 4 files changed, 36 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/ast2500-genesis3.dts
Signature · 1 line
2.35.3
#1 lore raw

PATCH v5 1/2 arm/dts: Add IBM Genesis3 board

Add devicetree source file. It uses the evb-ast2500 board files.

---
 arch/arm/dts/Makefile             |  1 +
 arch/arm/dts/ast2500-genesis3.dts | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm/dts/ast2500-genesis3.dts
arch/arm/dts/Makefile +1 -0
index 3515100c65..ed9714d832 100755
@@ -678,6 +678,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2400-evb.dtb \
 	ast2400-ahe-50dc.dtb \
 	ast2500-evb.dtb \
+	ast2500-genesis3.dtb \
 	ast2600a0-evb.dtb \
 	ast2600a1-evb.dtb \
 	ast2600-bletchley.dtb \
arch/arm/dts/ast2500-genesis3.dts new file +28 -0
new file mode 100644
index 0000000000..544758c5b8
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IBM Genesis3
+ *
+ * Copyright (C) 2022 9elements GmbH
+ */
+
+#include "ast2500-evb.dts"
+
+/ {
+	model = "IBM Genesis3";
+	compatible = "ibm,genesis3-bmc", "aspeed,ast2500";
+};
+
+&spi1 {
+	status = "disabled";
+};
+
+&fmc {
+	flash@0 {
+		compatible = "spansion,s25fl256l", "spi-flash";
+	};
+
+	flash@1 {
+		compatible = "spansion,s25fl256l", "spi-flash";
+	};
+};
+
Signature · 1 line
2.35.3