board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers
Subsystems (3)
PATCH v2 1/1 board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers
Support IBM-specific options for POWER10+ servers built on AST2600 BMC.
---
Changes since v1:
- Drop the defconfig in favor of yocto fragment
- remove __weak for board init
- select BOARD_LATE_INIT
arch/arm/mach-aspeed/ast2600/Kconfig | 9 ++++++ board/aspeed/ast2600_ibm/Kconfig | 13 +++++++++ board/aspeed/ast2600_ibm/Makefile | 1 + board/aspeed/ast2600_ibm/ibm.c | 43 ++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+) create mode 100644 board/aspeed/ast2600_ibm/Kconfig create mode 100644 board/aspeed/ast2600_ibm/Makefile create mode 100644 board/aspeed/ast2600_ibm/ibm.c
arch/arm/mach-aspeed/ast2600/Kconfig +9 -0
@@ -31,6 +31,14 @@ config TARGET_SLT_AST2600 help SLT-AST2600 is Aspeed SLT board for AST2600 chip. +config TARGET_AST2600_IBM + bool "AST2600-IBM" + select BOARD_LATE_INIT + select TPM + select TPM2_TIS_I2C + help + AST2600-IBM is IBM boards for AST2600 BMC based P0WER10+ servers + config TARGET_AST2600_INTEL bool "AST2600-INTEL" depends on ASPEED_AST2600
@@ -43,6 +51,7 @@ endchoice source "board/aspeed/evb_ast2600/Kconfig" source "board/aspeed/fpga_ast2600/Kconfig" source "board/aspeed/slt_ast2600/Kconfig" +source "board/aspeed/ast2600_ibm/Kconfig" source "board/aspeed/ast2600_intel/Kconfig" endif
board/aspeed/ast2600_ibm/Kconfig new file +13 -0
@@ -0,0 +1,13 @@ +if TARGET_AST2600_IBM + +config SYS_BOARD + default "ast2600_ibm" + +config SYS_VENDOR + default "aspeed" + +config SYS_CONFIG_NAME + string "board configuration name" + default "ast2600_ibm" + +endif
board/aspeed/ast2600_ibm/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-y += ibm.o
board/aspeed/ast2600_ibm/ibm.c new file +43 -0
43 lines not on this page · raw message
Signature · 1 line
2.27.0
Joel Stanley
maintainerQuoted 10 lines · Eddie James
Support IBM-specific options for POWER10+ servers built on AST2600 BMC.
Signed-off-by Eddie James <[email protected]>---
Changes since v1:
- Drop the defconfig in favor of yocto fragment
- remove__weakfor board init
- selectBOARD_LATE_INIT
Thanks, I've merged this with a minor addition to the commit message about late init.
I confirmed that setting these two in the config does what we want:
echo CONFIG_BOARD_EARLY_INIT_F=n >> .config
echo CONFIG_TARGET_AST2600_IBM=y >> .config
Quoted 115 lines
arch/arm/mach-aspeed/ast2600/Kconfig | 9 ++++++ board/aspeed/ast2600_ibm/Kconfig | 13 +++++++++ board/aspeed/ast2600_ibm/Makefile | 1 + board/aspeed/ast2600_ibm/ibm.c | 43 ++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+) create mode 100644 board/aspeed/ast2600_ibm/Kconfig create mode 100644 board/aspeed/ast2600_ibm/Makefile create mode 100644 board/aspeed/ast2600_ibm/ibm.carch/arm/mach-aspeed/ast2600/Kconfig +9
-0@@ -31,6 +31,14 @@ config TARGET_SLT_AST2600 help SLT-AST2600 is Aspeed SLT board for AST2600 chip. +config TARGET_AST2600_IBM + bool "AST2600-IBM" + select BOARD_LATE_INIT + select TPM + select TPM2_TIS_I2C + help + AST2600-IBM is IBM boards for AST2600 BMC based P0WER10+ servers + config TARGET_AST2600_INTEL bool "AST2600-INTEL" depends on ASPEED_AST2600@@ -43,6 +51,7 @@ endchoice source "board/aspeed/evb_ast2600/Kconfig" source "board/aspeed/fpga_ast2600/Kconfig" source "board/aspeed/slt_ast2600/Kconfig" +source "board/aspeed/ast2600_ibm/Kconfig" source "board/aspeed/ast2600_intel/Kconfig" endifboard/aspeed/ast2600_ibm/Kconfig new file +13
-0@@ -0,0 +1,13 @@ +if TARGET_AST2600_IBM + +config SYS_BOARD + default "ast2600_ibm" + +config SYS_VENDOR + default "aspeed" + +config SYS_CONFIG_NAME + string "board configuration name" + default "ast2600_ibm" + +endifboard/aspeed/ast2600_ibm/Makefile new file +1
-0@@ -0,0 +1 @@ +obj-y += ibm.oboard/aspeed/ast2600_ibm/ibm.c new file +43
-1@@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright 2022 IBM Corp. +*/ + +#include <common.h> +#include <dm/uclass.h> +#include <tpm-common.h> +#include <tpm-v2.h> + +int board_late_init (void ) +{ +int rc; +struct udevice *dev; +/* +* The digest is just an arbitrary sequence for now to ensure that the +* TPM gets "poisoned." +*/ +const unsigned char digest[32 ] = { +0x0a ,0x0b ,0x0c ,0x0d ,0x0e ,0x0f ,0x00 ,0x01 , +0x02 ,0x03 ,0x04 ,0x05 ,0x06 ,0x07 ,0x08 ,0x09 , +0xa0 ,0xb1 ,0xc2 ,0xd3 ,0xe4 ,0xf5 ,0x06 ,0x17 , +0x28 ,0x39 ,0x4a ,0x5b ,0x6c ,0x7d ,0x8e ,0x9f + }; + + rc =uclass_first_device_err (UCLASS_TPM , &dev); +if (rc) +return 0 ; + + rc =tpm_init (dev); +if (rc) +return 0 ; + + rc =tpm2_startup (dev,TPM2_SU_CLEAR ); +if (rc) +return 0 ; + + rc =tpm2_pcr_extend (dev,0 , digest); +if (!rc) +printf ("TPM: PCR0 extended.\n" ); + +return 0 ; +} --2.27.0