Rockchip: Add option to prevent boot on plug-in
Subsystems (3)
v2 cover Rockchip: Add option to prevent boot on plug-in
From: Chris Morgan <[email protected]>
Sometimes it is desirable to prevent a board from automatically booting as soon as the power cable is plugged in. For boards with an rk8xx PMIC, (excluding the rk808) we can actually query the power up source.
Changes from V1:
- Moved a comment as requested to be above a function.
- Removed unneeded variable of "plug_in".
Chris Morgan (2):
power: pmic: rk8xx: Support sysreset shutdown method
rockchip: Add option to prevent booting on power plug-in
arch/arm/mach-rockchip/Kconfig | 10 ++++ drivers/power/pmic/rk8xx.c | 84 +++++++++++++++++++++++++++++++++- include/power/rk8xx_pmic.h | 3 ++ 3 files changed, 96 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
PATCH v2 1/2 power: pmic: rk8xx: Support sysreset shutdown method
From: Chris Morgan <[email protected]>
Add support for sysreset shutdown for this PMIC. The values were pulled from the various datasheets, but for now it has only been tested on the rk817 (for an Odroid Go Advance).
--- drivers/power/pmic/rk8xx.c | 50 +++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)
drivers/power/pmic/rk8xx.c +49 -1
@@ -6,10 +6,50 @@#include <common.h> #include <dm.h> +#include <dm/lists.h> #include <errno.h> #include <log.h> #include <power/rk8xx_pmic.h> #include <power/pmic.h> +#include <sysreset.h> + +static int rk8xx_sysreset_request (struct udevice *dev,enum sysreset_t type) +{ +struct rk8xx_priv *priv =dev_get_priv (dev->parent); + +if (type !=SYSRESET_POWER_OFF ) +return -EPROTONOSUPPORT ; + +switch (priv->variant) { +case RK805_ID : +case RK808_ID : +case RK816_ID : +case RK818_ID : +pmic_clrsetbits (dev->parent,REG_DEVCTRL ,0 ,BIT (0 )); +break ; +case RK809_ID : +case RK817_ID : +pmic_clrsetbits (dev->parent,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); +break ; +default : +printf ("Unknown PMIC RK%x: Cannot shutdown\n" , + priv->variant); +return -EPROTONOSUPPORT ; + }; + +return -EINPROGRESS ; +} + +static struct sysreset_ops rk8xx_sysreset_ops = { + .request = rk8xx_sysreset_request, +}; + +U_BOOT_DRIVER (rk8xx_sysreset) = { + .name ="rk8xx_sysreset" , + .id =UCLASS_SYSRESET , + .ops = &rk8xx_sysreset_ops, +};static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection,
@@ -61,7 +101,7 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)static int rk8xx_bind (struct udevice *dev) {ofnode regulators_node; -int children; +int children, ret; regulators_node =dev_read_subnode (dev,"regulators" );if (!ofnode_valid (regulators_node)) {
@@ -72,6 +112,14 @@ static int rk8xx_bind(struct udevice *dev)debug ("%s: '%s' - found regulators subnode\n" , __func__, dev->name); +if (CONFIG_IS_ENABLED (SYSRESET )) { + ret =device_bind_driver_to_node (dev,"rk8xx_sysreset" , +"rk8xx_sysreset" , +dev_ofnode (dev),NULL ); +if (ret) +return ret; + } + children =pmic_bind_children (dev, regulators_node, pmic_children_info);if (!children)debug ("%s: %s - no child found\n" , __func__, dev->name);
Signature · 1 line
2.25.1
PATCH v2 2/2 rockchip: Add option to prevent booting on power plug-in
In reply to Chris MorganFrom: Chris Morgan <[email protected]>
For Rockchip boards with the all rk8xx series PMICs (excluding the rk808), it is sometimes desirable to not boot whenever the device is plugged in. An example would be for the Odroid Go Advance.
This provides a configurable option to check the PMIC says it was powered because of a plug-in event. If the value is 1 and this option is selected, the device shuts down shortly after printing a message to console stating the reason why it's shutting down. Powering up the board with the power button is not affected.
This patch parallels the work done in the following patch series:
https://lore.kernel.org/u-boot/[email protected]/
--- arch/arm/mach-rockchip/Kconfig | 10 ++++++++++ drivers/power/pmic/rk8xx.c | 34 ++++++++++++++++++++++++++++++++++ include/power/rk8xx_pmic.h | 3 +++ 3 files changed, 47 insertions(+)
arch/arm/mach-rockchip/Kconfig +10 -0
@@ -361,6 +361,16 @@ config ROCKCHIP_BOOT_MODE_REG The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h) according to the value from this register. +config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON + bool "Disable device boot on power plug-in" + depends on PMIC_RK8XX + default n + ---help--- + Say Y here to prevent the device from booting up because of a plug-in + event. When set, the device will boot briefly to determine why it was + powered on, and if it was determined because of a plug-in event + instead of a button press event it will shut back off. + config ROCKCHIP_STIMER bool "Rockchip STIMER support" default y
drivers/power/pmic/rk8xx.c +34 -0
@@ -51,6 +51,38 @@ U_BOOT_DRIVER(rk8xx_sysreset) = { .ops = &rk8xx_sysreset_ops, }; +/* In the event of a plug-in and the appropriate option has been +* selected, we simply shutdown instead of continue the normal boot +* process. Please note the rk808 is not supported as it doesn't +* have the appropriate register. +*/ +void rk8xx_off_for_plugin (struct udevice *dev) +{ +struct rk8xx_priv *priv =dev_get_priv (dev); + +switch (priv->variant) { +case RK805_ID : +case RK816_ID : +case RK818_ID : +if (pmic_reg_read (dev,RK8XX_ON_SOURCE ) &RK8XX_ON_PLUG_IN ) { +printf ("Power Off due to plug-in event\n" ); +pmic_clrsetbits (dev,REG_DEVCTRL ,0 ,BIT (0 )); + } +break ; +case RK809_ID : +case RK817_ID : +if (pmic_reg_read (dev,RK817_ON_SOURCE ) &RK8XX_ON_PLUG_IN ) { +printf ("Power Off due to plug-in event\n" ); +pmic_clrsetbits (dev,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); + } +break ; +default : +printf ("PMIC RK%x: Cannot read boot reason.\n" , + priv->variant); + } +} +static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection, * the under-voltage protection will shutdown the LDO3 and reset the PMIC
@@ -211,6 +243,8 @@ static int rk8xx_probe(struct udevice *dev)pmic_reg_read (dev, on_source), pmic_reg_read(dev, off_source));printf ("\n" ); +if (CONFIG_IS_ENABLED (ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON )) +rk8xx_off_for_plugin (dev);return 0 ; }
include/power/rk8xx_pmic.h +3 -0
@@ -214,6 +214,9 @@ enum {#define RK817_ON_SOURCE 0xf5#define RK817_OFF_SOURCE 0xf6 +#define RK8XX_ON_PWRON BIT(7) +#define RK8XX_ON_PLUG_IN BIT(6) +struct reg_data {u8 reg;u8 val;
Signature · 1 line
2.25.1
Re: [PATCH v2 2/2] rockchip: Add option to prevent booting on power plug-in
Quoted 12 lines · Chris Morgan
From: Chris Morgan <[email protected]>
For Rockchip boards with the all rk8xx series PMICs (excluding the rk808), it is sometimes desirable to not boot whenever the device is plugged in. An example would be for the Odroid Go Advance.
This provides a configurable option to check the PMIC says it was powered because of a plug-in event. If the value is 1 and this option is selected, the device shuts down shortly after printing a message to console stating the reason why it's shutting down. Powering up the board with the power button is not affected.
Quoted 4 lines
This patch parallels the work done in the following patch series:
https://lore.kernel.org/u-boot/[email protected]/Signed-off-by Chris Morgan <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 93 lines
--- arch/arm/mach-rockchip/Kconfig | 10 ++++++++++ drivers/power/pmic/rk8xx.c | 34 ++++++++++++++++++++++++++++++++++ include/power/rk8xx_pmic.h | 3 +++ 3 files changed, 47 insertions(+)arch/arm/mach-rockchip/Kconfig +10
-0@@ -361,6 +361,16 @@ config ROCKCHIP_BOOT_MODE_REG The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h) according to the value from this register. +config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON + bool "Disable device boot on power plug-in" + depends on PMIC_RK8XX + default n + ---help--- + Say Y here to prevent the device from booting up because of a plug-in + event. When set, the device will boot briefly to determine why it was + powered on, and if it was determined because of a plug-in event + instead of a button press event it will shut back off. + config ROCKCHIP_STIMER bool "Rockchip STIMER support" default ydrivers/power/pmic/rk8xx.c +34
-0@@ -51,6 +51,38 @@ U_BOOT_DRIVER(rk8xx_sysreset) = { .ops = &rk8xx_sysreset_ops, }; +/* In the event of a plug-in and the appropriate option has been +* selected, we simply shutdown instead of continue the normal boot +* process. Please note the rk808 is not supported as it doesn't +* have the appropriate register. +*/ +void rk8xx_off_for_plugin (struct udevice *dev) +{ +struct rk8xx_priv *priv =dev_get_priv (dev); + +switch (priv->variant) { +case RK805_ID : +case RK816_ID : +case RK818_ID : +if (pmic_reg_read (dev,RK8XX_ON_SOURCE ) &RK8XX_ON_PLUG_IN ) { +printf ("Power Off due to plug-in event\n" ); +pmic_clrsetbits (dev,REG_DEVCTRL ,0 ,BIT (0 )); + } +break ; +case RK809_ID : +case RK817_ID : +if (pmic_reg_read (dev,RK817_ON_SOURCE ) &RK8XX_ON_PLUG_IN ) { +printf ("Power Off due to plug-in event\n" ); +pmic_clrsetbits (dev,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); + } +break ; +default : +printf ("PMIC RK%x: Cannot read boot reason.\n" , + priv->variant); + } +} +static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection, * the under-voltage protection will shutdown the LDO3 and reset the PMIC @@ -211,6 +243,8 @@ static int rk8xx_probe(struct udevice *dev)pmic_reg_read (dev, on_source), pmic_reg_read(dev, off_source));printf ("\n" ); +if (CONFIG_IS_ENABLED (ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON )) +rk8xx_off_for_plugin (dev);return 0 ; }include/power/rk8xx_pmic.h +3
-0@@ -214,6 +214,9 @@ enum {#define RK817_ON_SOURCE 0xf5#define RK817_OFF_SOURCE 0xf6 +#define RK8XX_ON_PWRON BIT(7) +#define RK8XX_ON_PLUG_IN BIT(6) +struct reg_data {u8 reg;u8 val;
Re: [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method
In reply to Chris MorganHello,
this causes regression on pinebook pro:
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###
Is there something missing in the DT for this board?
Or perhaps a fallback should be provided in absence of the PMIC?
Thanks
Michal
Quoted 95 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add support for sysreset shutdown for this PMIC. The values were pulled from the various datasheets, but for now it has only been tested on the rk817 (for an Odroid Go Advance).
Signed-off-by Chris Morgan <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Reviewed-by Kever Yang <[email protected]>--- drivers/power/pmic/rk8xx.c | 50 +++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)drivers/power/pmic/rk8xx.c +49
-1@@ -6,10 +6,50 @@#include <common.h> #include <dm.h> +#include <dm/lists.h> #include <errno.h> #include <log.h> #include <power/rk8xx_pmic.h> #include <power/pmic.h> +#include <sysreset.h> + +static int rk8xx_sysreset_request (struct udevice *dev,enum sysreset_t type) +{ +struct rk8xx_priv *priv =dev_get_priv (dev->parent); + +if (type !=SYSRESET_POWER_OFF ) +return -EPROTONOSUPPORT ; + +switch (priv->variant) { +case RK805_ID : +case RK808_ID : +case RK816_ID : +case RK818_ID : +pmic_clrsetbits (dev->parent,REG_DEVCTRL ,0 ,BIT (0 )); +break ; +case RK809_ID : +case RK817_ID : +pmic_clrsetbits (dev->parent,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); +break ; +default : +printf ("Unknown PMIC RK%x: Cannot shutdown\n" , + priv->variant); +return -EPROTONOSUPPORT ; + }; + +return -EINPROGRESS ; +} + +static struct sysreset_ops rk8xx_sysreset_ops = { + .request = rk8xx_sysreset_request, +}; + +U_BOOT_DRIVER (rk8xx_sysreset) = { + .name ="rk8xx_sysreset" , + .id =UCLASS_SYSRESET , + .ops = &rk8xx_sysreset_ops, +};static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection, @@ -61,7 +101,7 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)static int rk8xx_bind (struct udevice *dev) {ofnode regulators_node; -int children; +int children, ret; regulators_node =dev_read_subnode (dev,"regulators" );if (!ofnode_valid (regulators_node)) {@@ -72,6 +112,14 @@ static int rk8xx_bind(struct udevice *dev)debug ("%s: '%s' - found regulators subnode\n" , __func__, dev->name); +if (CONFIG_IS_ENABLED (SYSRESET )) { + ret =device_bind_driver_to_node (dev,"rk8xx_sysreset" , +"rk8xx_sysreset" , +dev_ofnode (dev),NULL ); +if (ret) +return ret; + } + children =pmic_bind_children (dev, regulators_node, pmic_children_info);if (!children)debug ("%s: %s - no child found\n" , __func__, dev->name);Signature · 1 line
2.25.1
Re: [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method
In reply to Chris MorganQuoted 21 lines · Chris Morgan
Quoted 8 lines · Michal Suchánek
Hello,
this causes regression on pinebook pro:
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###Quoted 7 lines
Is there something missing in the DT for this board?
Or perhaps a fallback should be provided in absence of the PMIC?
Thanks
Michal
Sorry Michal, I was busy traveling and then came down with a pretty bad cold, so I've been a bit away from things. Are you getting this error when you attempt to reset or to poweroff the Pinebook Pro from U-Boot?
Quoted 5 lines
I tested the code on my RK817, but a cursory reading of the datasheet suggests every rk8xx known so far should be able to shutdown using the two methods added here. I'm wondering if there is perhaps a configuration issue we need to account for, as this routine is only shutting down the PMIC and not restarting it.
This is trying to restart the system from u-boot.
The walk function *seems* to try all methods of all reset providers but maybe there is some catch there.
Thanks
Michal
Quoted 100 lines
Thank you.
Quoted 97 lines · Chris Morgan
Quoted 95 lines
From: Chris Morgan <[email protected]>
Add support for sysreset shutdown for this PMIC. The values were pulled from the various datasheets, but for now it has only been tested on the rk817 (for an Odroid Go Advance).
Signed-off-by Chris Morgan <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Reviewed-by Kever Yang <[email protected]>--- drivers/power/pmic/rk8xx.c | 50 +++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)drivers/power/pmic/rk8xx.c +49
-1@@ -6,10 +6,50 @@#include <common.h> #include <dm.h> +#include <dm/lists.h> #include <errno.h> #include <log.h> #include <power/rk8xx_pmic.h> #include <power/pmic.h> +#include <sysreset.h> + +static int rk8xx_sysreset_request (struct udevice *dev,enum sysreset_t type) +{ +struct rk8xx_priv *priv =dev_get_priv (dev->parent); + +if (type !=SYSRESET_POWER_OFF ) +return -EPROTONOSUPPORT ; + +switch (priv->variant) { +case RK805_ID : +case RK808_ID : +case RK816_ID : +case RK818_ID : +pmic_clrsetbits (dev->parent,REG_DEVCTRL ,0 ,BIT (0 )); +break ; +case RK809_ID : +case RK817_ID : +pmic_clrsetbits (dev->parent,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); +break ; +default : +printf ("Unknown PMIC RK%x: Cannot shutdown\n" , + priv->variant); +return -EPROTONOSUPPORT ; + }; + +return -EINPROGRESS ; +} + +static struct sysreset_ops rk8xx_sysreset_ops = { + .request = rk8xx_sysreset_request, +}; + +U_BOOT_DRIVER (rk8xx_sysreset) = { + .name ="rk8xx_sysreset" , + .id =UCLASS_SYSRESET , + .ops = &rk8xx_sysreset_ops, +};static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection, @@ -61,7 +101,7 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)static int rk8xx_bind (struct udevice *dev) {ofnode regulators_node; -int children; +int children, ret; regulators_node =dev_read_subnode (dev,"regulators" );if (!ofnode_valid (regulators_node)) {@@ -72,6 +112,14 @@ static int rk8xx_bind(struct udevice *dev)debug ("%s: '%s' - found regulators subnode\n" , __func__, dev->name); +if (CONFIG_IS_ENABLED (SYSRESET )) { + ret =device_bind_driver_to_node (dev,"rk8xx_sysreset" , +"rk8xx_sysreset" , +dev_ofnode (dev),NULL ); +if (ret) +return ret; + } + children =pmic_bind_children (dev, regulators_node, pmic_children_info);if (!children)debug ("%s: %s - no child found\n" , __func__, dev->name);Signature · 1 line
2.25.1
Re: [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method
In reply to Michal SuchánekQuoted 8 lines · Michal Suchánek
Hello,
this causes regression on pinebook pro:
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###
Quoted 7 lines
Is there something missing in the DT for this board?
Or perhaps a fallback should be provided in absence of the PMIC?
Thanks
Michal
Sorry Michal, I was busy traveling and then came down with a pretty bad cold, so I've been a bit away from things. Are you getting this error when you attempt to reset or to poweroff the Pinebook Pro from U-Boot?
I tested the code on my RK817, but a cursory reading of the datasheet suggests every rk8xx known so far should be able to shutdown using the two methods added here. I'm wondering if there is perhaps a configuration issue we need to account for, as this routine is only shutting down the PMIC and not restarting it.
Thank you.
Quoted 97 lines · Chris Morgan
Quoted 95 lines
From: Chris Morgan <[email protected]>
Add support for sysreset shutdown for this PMIC. The values were pulled from the various datasheets, but for now it has only been tested on the rk817 (for an Odroid Go Advance).
Signed-off-by Chris Morgan <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Reviewed-by Kever Yang <[email protected]>--- drivers/power/pmic/rk8xx.c | 50 +++++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)drivers/power/pmic/rk8xx.c +49
-1@@ -6,10 +6,50 @@#include <common.h> #include <dm.h> +#include <dm/lists.h> #include <errno.h> #include <log.h> #include <power/rk8xx_pmic.h> #include <power/pmic.h> +#include <sysreset.h> + +static int rk8xx_sysreset_request (struct udevice *dev,enum sysreset_t type) +{ +struct rk8xx_priv *priv =dev_get_priv (dev->parent); + +if (type !=SYSRESET_POWER_OFF ) +return -EPROTONOSUPPORT ; + +switch (priv->variant) { +case RK805_ID : +case RK808_ID : +case RK816_ID : +case RK818_ID : +pmic_clrsetbits (dev->parent,REG_DEVCTRL ,0 ,BIT (0 )); +break ; +case RK809_ID : +case RK817_ID : +pmic_clrsetbits (dev->parent,RK817_REG_SYS_CFG3 ,0 , +BIT (0 )); +break ; +default : +printf ("Unknown PMIC RK%x: Cannot shutdown\n" , + priv->variant); +return -EPROTONOSUPPORT ; + }; + +return -EINPROGRESS ; +} + +static struct sysreset_ops rk8xx_sysreset_ops = { + .request = rk8xx_sysreset_request, +}; + +U_BOOT_DRIVER (rk8xx_sysreset) = { + .name ="rk8xx_sysreset" , + .id =UCLASS_SYSRESET , + .ops = &rk8xx_sysreset_ops, +};static struct reg_data rk817_init_reg[] = {/* enable the under-voltage protection, @@ -61,7 +101,7 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)static int rk8xx_bind (struct udevice *dev) {ofnode regulators_node; -int children; +int children, ret; regulators_node =dev_read_subnode (dev,"regulators" );if (!ofnode_valid (regulators_node)) {@@ -72,6 +112,14 @@ static int rk8xx_bind(struct udevice *dev)debug ("%s: '%s' - found regulators subnode\n" , __func__, dev->name); +if (CONFIG_IS_ENABLED (SYSRESET )) { + ret =device_bind_driver_to_node (dev,"rk8xx_sysreset" , +"rk8xx_sysreset" , +dev_ofnode (dev),NULL ); +if (ret) +return ret; + } + children =pmic_bind_children (dev, regulators_node, pmic_children_info);if (!children)debug ("%s: %s - no child found\n" , __func__, dev->name);Signature · 1 line
2.25.1
Re: [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method
In reply to Michal SuchánekQuoted 28 lines · Michal Suchánek
Quoted 21 lines · Chris Morgan
Quoted 8 lines · Michal Suchánek
Hello,
this causes regression on pinebook pro:
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###Quoted 7 lines
Is there something missing in the DT for this board?
Or perhaps a fallback should be provided in absence of the PMIC?
Thanks
Michal
Sorry Michal, I was busy traveling and then came down with a pretty bad cold, so I've been a bit away from things. Are you getting this error when you attempt to reset or to poweroff the Pinebook Pro from U-Boot?
Quoted 5 lines
I tested the code on my RK817, but a cursory reading of the datasheet suggests every rk8xx known so far should be able to shutdown using the two methods added here. I'm wondering if there is perhaps a configuration issue we need to account for, as this routine is only shutting down the PMIC and not restarting it.
Quoted 4 lines
This is trying to restart the system from u-boot.
The walk function *seems* to try all methods of all reset providers but maybe there is some catch there.
After adding debug prints it looks like no sysreset uclass is found anymore after the patch:
drivers/sysreset/sysreset-uclass.c +19 -1
@@ -5,6 +5,7 @@*/ #define LOG_CATEGORY UCLASS_SYSRESET +#define DEBUG #include <common.h> #include <command.h>
@@ -53,6 +54,18 @@ int sysreset_get_last(struct udevice *dev)return ops->get_last (dev); } +static inline const char *sysreset_to_str (enum sysreset_t reset) +{ +switch (reset) { +case SYSRESET_WARM :return "warm restart" ; +case SYSRESET_COLD :return "cold restart" ; +case SYSRESET_POWER :return "power cycle" ; +case SYSRESET_POWER_OFF :return "power off" ; +case SYSRESET_COUNT :break ; + } +return "unknown" ; +} +int sysreset_walk (enum sysreset_t type) {struct udevice *dev;
@@ -62,9 +75,14 @@ int sysreset_walk(enum sysreset_t type)for (uclass_first_device (UCLASS_SYSRESET , &dev); dev;uclass_next_device (&dev)) { +debug ("trying reset %s on %s..." , dev->name, +sysreset_to_str (type)); ret =sysreset_request (dev, type); -if (ret == -EINPROGRESS ) +if (ret == -EINPROGRESS ) { +debug ("done\n" );break ; + } +debug ("\n" ); } type++; }
Signature · 37 lines
2.36.1
With sysreset patch reverted
Hit any key to stop autoboot: 0
=> reset
resetting ...
trying reset sysreset on cold restart...
U-Boot TPL 2022.07-00027-gd9cc607b5e-dirty (Jul 16 2022 - 16:15:27)
With sysreset support included
Hit any key to stop autoboot: 0
=> reset
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###
The error is printed here:
void sysreset_walk_halt(enum sysreset_t type)
{
int ret;
ret = sysreset_walk(type);
/* Wait for the reset to take effect */
if (ret == -EINPROGRESS)
mdelay(100);
/* Still no reset? Give up */
if (spl_phase() <= PHASE_SPL)
log_err("no sysreset\n");
else
log_err("System reset not supported on this platform\n");
hang();
}