Skip to contentSkip to conversation

net: phy: Remove inline definitions from convinience functions

PATCH In review Ramon Fried 5 participants 6 messages Jun 5, 2022 – Aug 8, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: phy: Remove inline definitions from convinience functions

The convinience functions are not that small and they caused bloated text segments because of their usage. There was no need to inline them in the first place, as they're not part of a fastpath.

---
 drivers/net/phy/phy.c | 174 ++++++++++++++++++++++++++++++++++++++
 include/phy.h         | 189 ++----------------------------------------
 2 files changed, 183 insertions(+), 180 deletions(-)
drivers/net/phy/phy.c +174 -0
index 1121b99abf..e6e1755518 100644
@@ -1101,3 +1101,177 @@ int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask,
 
 	return phy_write(phydev, devad, regnum, (ret & ~mask) | set);
 }
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to read
+ * @return: value for success or negative errno for failure
+ */
+int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+	struct mii_dev *bus = phydev->bus;
+
+	if (!bus || !bus->read) {
+		debug("%s: No bus configured\n", __func__);
+		return -1;
+	}
+
+	return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val)
+{
+	struct mii_dev *bus = phydev->bus;
+
+	if (!bus || !bus->write) {
+		debug("%s: No bus configured\n", __func__);
+		return -1;
+	}
+
+	return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+/**
+ * phy_mmd_start_indirect - Convenience function for writing MMD registers
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @return: None
+ */
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum)
+{
+	/* Write the desired MMD Devad */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
+
+	/* Select the Function : DATA with no post increment */
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
+		  (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @return: Value for success or negative errno for failure
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum)
+{
+	struct phy_driver *drv = phydev->drv;
+
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	/* driver-specific access */
+	if (drv->read_mmd)
+		return drv->read_mmd(phydev, devad, regnum);
+
+	/* direct C45 / C22 access */
+	if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+	    devad == MDIO_DEVAD_NONE || !devad)
+		return phy_read(phydev, devad, regnum);
+
+	/* indirect C22 access */
+	phy_mmd_start_indirect(phydev, devad, regnum);
+
+	/* Read the content of the MMD's selected register */
+	return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
+}
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val)
+{
+	struct phy_driver *drv = phydev->drv;
+
+	if (regnum > (u16)~0 || devad > 32)
+		return -EINVAL;
+
+	/* driver-specific access */
+	if (drv->write_mmd)
+		return drv->write_mmd(phydev, devad, regnum, val);
+
+	/* direct C45 / C22 access */
+	if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+	    devad == MDIO_DEVAD_NONE || !devad)
+		return phy_write(phydev, devad, regnum, val);
+
+	/* indirect C22 access */
+	phy_mmd_start_indirect(phydev, devad, regnum);
+
+	/* Write the data into MMD's selected register */
+	return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
+}
+
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int value, ret;
+
+	value = phy_read_mmd(phydev, devad, regnum);
+	if (value < 0)
+		return value;
+
+	value |= val;
+
+	ret = phy_write_mmd(phydev, devad, regnum, value);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int value, ret;
+
+	value = phy_read_mmd(phydev, devad, regnum);
+	if (value < 0)
+		return value;
+
+	value &= ~val;
+
+	ret = phy_write_mmd(phydev, devad, regnum, value);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
include/phy.h +9 -180

201 lines not on this page · raw message

Signature · 1 line
2.30.2
Reviewed-by on v1 1/1
#1 lore raw

Hi Ramon

Il dom 5 giu 2022, 02:44 Ramon Fried <[email protected]> ha scritto:

Quoted 5 lines

The convinience functions are not that small and they caused bloated text segments because of their usage. There was no need to inline them in the first place, as they're not part of a fastpath.

Please give numbers here in commit message ;)

Otherwise

Michael

Quoted 415 lines
---
 drivers/net/phy/phy.c | 174 ++++++++++++++++++++++++++++++++++++++
 include/phy.h         | 189 ++----------------------------------------
 2 files changed, 183 insertions(+), 180 deletions(-)
drivers/net/phy/phy.c +48 -0
index 1121b99abf..e6e1755518 100644
@@ -1101,3 +1101,177 @@ int phy_modify(struct phy_device *phydev, int
 devad, int regnum, u16 mask,
 
        return phy_write(phydev, devad, regnum, (ret & ~mask) | set);
 }
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to read
+ * @return: value for success or negative errno for failure
+ */
+int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       if (!bus || !bus->read) {
+               debug("%s: No bus configured\n", __func__);
+               return -1;
+       }
+
+       return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       if (!bus || !bus->write) {
+               debug("%s: No bus configured\n", __func__);
+               return -1;
+       }
+
+       return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+/**
+ * phy_mmd_start_indirect - Convenience function for writing MMD registers
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @return: None
+ */
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int

regnum)

drivers/net/phy/phy.c +53 -0
+{
+       /* Write the desired MMD Devad */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
+
+       /* Write the desired MMD register address */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
+
+       /* Select the Function : DATA with no post increment */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
+                 (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @return: Value for success or negative errno for failure
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum)
+{
+       struct phy_driver *drv = phydev->drv;
+
+       if (regnum > (u16)~0 || devad > 32)
+               return -EINVAL;
+
+       /* driver-specific access */
+       if (drv->read_mmd)
+               return drv->read_mmd(phydev, devad, regnum);
+
+       /* direct C45 / C22 access */
+       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+           devad == MDIO_DEVAD_NONE || !devad)
+               return phy_read(phydev, devad, regnum);
+
+       /* indirect C22 access */
+       phy_mmd_start_indirect(phydev, devad, regnum);
+
+       /* Read the content of the MMD's selected register */
+       return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
+}
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16

val)

drivers/net/phy/phy.c +32 -0
+{
+       struct phy_driver *drv = phydev->drv;
+
+       if (regnum > (u16)~0 || devad > 32)
+               return -EINVAL;
+
+       /* driver-specific access */
+       if (drv->write_mmd)
+               return drv->write_mmd(phydev, devad, regnum, val);
+
+       /* direct C45 / C22 access */
+       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+           devad == MDIO_DEVAD_NONE || !devad)
+               return phy_write(phydev, devad, regnum, val);
+
+       /* indirect C22 access */
+       phy_mmd_start_indirect(phydev, devad, regnum);
+
+       /* Write the data into MMD's selected register */
+       return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
+}
+
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum,

u16 val)

drivers/net/phy/phy.c +18 -0
+{
+       int value, ret;
+
+       value = phy_read_mmd(phydev, devad, regnum);
+       if (value < 0)
+               return value;
+
+       value |= val;
+
+       ret = phy_write_mmd(phydev, devad, regnum, value);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a

register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)

drivers/net/phy/phy.c +15 -0
+{
+       int value, ret;
+
+       value = phy_read_mmd(phydev, devad, regnum);
+       if (value < 0)
+               return value;
+
+       value &= ~val;
+
+       ret = phy_write_mmd(phydev, devad, regnum, value);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
include/phy.h +0 -155
index b329595710..ad2096ca84 100644
@@ -177,186 +177,6 @@ struct fixed_link {
        int asym_pause;
 };
 
-/**
- * phy_read - Convenience function for reading a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to read
- * @return: value for success or negative errno for failure
- */
-static inline int phy_read(struct phy_device *phydev, int devad, int
 regnum)
-{
-       struct mii_dev *bus = phydev->bus;
-
-       if (!bus || !bus->read) {
-               debug("%s: No bus configured\n", __func__);
-               return -1;
-       }
-
-       return bus->read(bus, phydev->addr, devad, regnum);
-}
-
-/**
- * phy_write - Convenience function for writing a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write(struct phy_device *phydev, int devad, int
 regnum,
-                       u16 val)
-{
-       struct mii_dev *bus = phydev->bus;
-
-       if (!bus || !bus->write) {
-               debug("%s: No bus configured\n", __func__);
-               return -1;
-       }
-
-       return bus->write(bus, phydev->addr, devad, regnum, val);
-}
-
-/**
- * phy_mmd_start_indirect - Convenience function for writing MMD registers
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @return: None
- */
-static inline void phy_mmd_start_indirect(struct phy_device *phydev, int
 devad,
-                                         int regnum)
-{
-       /* Write the desired MMD Devad */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
-
-       /* Write the desired MMD register address */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
-
-       /* Select the Function : DATA with no post increment */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
-                 (devad | MII_MMD_CTRL_NOINCR));
-}
-
-/**
- * phy_read_mmd - Convenience function for reading a register
- * from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @return: Value for success or negative errno for failure
- */
-static inline int phy_read_mmd(struct phy_device *phydev, int devad,
-                              int regnum)
-{
-       struct phy_driver *drv = phydev->drv;
-
-       if (regnum > (u16)~0 || devad > 32)
-               return -EINVAL;
-
-       /* driver-specific access */
-       if (drv->read_mmd)
-               return drv->read_mmd(phydev, devad, regnum);
-
-       /* direct C45 / C22 access */
-       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
-           devad == MDIO_DEVAD_NONE || !devad)
-               return phy_read(phydev, devad, regnum);
-
-       /* indirect C22 access */
-       phy_mmd_start_indirect(phydev, devad, regnum);
-
-       /* Read the content of the MMD's selected register */
-       return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
-}
-
-/**
- * phy_write_mmd - Convenience function for writing a register
- * on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write_mmd(struct phy_device *phydev, int devad,
-                               int regnum, u16 val)
-{
-       struct phy_driver *drv = phydev->drv;
-
-       if (regnum > (u16)~0 || devad > 32)
-               return -EINVAL;
-
-       /* driver-specific access */
-       if (drv->write_mmd)
-               return drv->write_mmd(phydev, devad, regnum, val);
-
-       /* direct C45 / C22 access */
-       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
-           devad == MDIO_DEVAD_NONE || !devad)
-               return phy_write(phydev, devad, regnum, val);
-
-       /* indirect C22 access */
-       phy_mmd_start_indirect(phydev, devad, regnum);
-
-       /* Write the data into MMD's selected register */
-       return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
-}
-
-/**
- * phy_set_bits_mmd - Convenience function for setting bits in a register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to set
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
-                                  u32 regnum, u16 val)
-{
-       int value, ret;
-
-       value = phy_read_mmd(phydev, devad, regnum);
-       if (value < 0)
-               return value;
-
-       value |= val;
-
-       ret = phy_write_mmd(phydev, devad, regnum, value);
-       if (ret < 0)
-               return ret;
-
-       return 0;
-}
-
-/**
- * phy_clear_bits_mmd - Convenience function for clearing bits in a

register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to clear
- * @return: 0 for success or negative errno for failure
- */

include/phy.h +7 -18
-static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
-                                    u32 regnum, u16 val)
-{
-       int value, ret;
-
-       value = phy_read_mmd(phydev, devad, regnum);
-       if (value < 0)
-               return value;
-
-       value &= ~val;
-
-       ret = phy_write_mmd(phydev, devad, regnum, value);
-       if (ret < 0)
-               return ret;
-
-       return 0;
-}
-
 #ifdef CONFIG_PHYLIB_10G
 extern struct phy_driver gen10g_driver;
 #endif
@@ -508,6 +328,15 @@ static inline ofnode phy_get_ofnode(struct phy_device
 *phydev)
        return ofnode_null();
 }
 #endif
+
+int phy_read(struct phy_device *phydev, int devad, int regnum);
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val);
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int
 regnum);
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum);
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16
 val);
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum,

u16 val);
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+
int phy_startup(struct phy_device *phydev);
int phy_config(struct phy_device *phydev);
int phy_shutdown(struct phy_device *phydev);
--
2.30.2

#2 lore raw
In reply to Michael Nazzareno Trimarchi
Quoted 5 lines · Michael Nazzareno Trimarchi

Hi Ramon

Il dom 5 giu 2022, 02:44 Ramon Fried <[email protected]> ha scritto:

Quoted 1 line
Quoted 8 lines
Quoted 4 lines

The convinience functions are not that small and they caused bloated text segments because of their usage. There was no need to inline them in the first place, as they're not part of a fastpath.

Please give numbers here in commit message ;)

You can see some numbers in the patch phy: dp83867: add dp83867_{read,write}_mmd helpers"
Thanks,
Ramon

Quoted 406 lines

Otherwise

Michael

Quoted 400 lines
---
 drivers/net/phy/phy.c | 174 ++++++++++++++++++++++++++++++++++++++
 include/phy.h         | 189 ++----------------------------------------
 2 files changed, 183 insertions(+), 180 deletions(-)
drivers/net/phy/phy.c +174 -0
index 1121b99abf..e6e1755518 100644
@@ -1101,3 +1101,177 @@ int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask,
 
        return phy_write(phydev, devad, regnum, (ret & ~mask) | set);
 }
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to read
+ * @return: value for success or negative errno for failure
+ */
+int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       if (!bus || !bus->read) {
+               debug("%s: No bus configured\n", __func__);
+               return -1;
+       }
+
+       return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       if (!bus || !bus->write) {
+               debug("%s: No bus configured\n", __func__);
+               return -1;
+       }
+
+       return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+/**
+ * phy_mmd_start_indirect - Convenience function for writing MMD registers
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @return: None
+ */
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum)
+{
+       /* Write the desired MMD Devad */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
+
+       /* Write the desired MMD register address */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
+
+       /* Select the Function : DATA with no post increment */
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
+                 (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @return: Value for success or negative errno for failure
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum)
+{
+       struct phy_driver *drv = phydev->drv;
+
+       if (regnum > (u16)~0 || devad > 32)
+               return -EINVAL;
+
+       /* driver-specific access */
+       if (drv->read_mmd)
+               return drv->read_mmd(phydev, devad, regnum);
+
+       /* direct C45 / C22 access */
+       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+           devad == MDIO_DEVAD_NONE || !devad)
+               return phy_read(phydev, devad, regnum);
+
+       /* indirect C22 access */
+       phy_mmd_start_indirect(phydev, devad, regnum);
+
+       /* Read the content of the MMD's selected register */
+       return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
+}
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val)
+{
+       struct phy_driver *drv = phydev->drv;
+
+       if (regnum > (u16)~0 || devad > 32)
+               return -EINVAL;
+
+       /* driver-specific access */
+       if (drv->write_mmd)
+               return drv->write_mmd(phydev, devad, regnum, val);
+
+       /* direct C45 / C22 access */
+       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
+           devad == MDIO_DEVAD_NONE || !devad)
+               return phy_write(phydev, devad, regnum, val);
+
+       /* indirect C22 access */
+       phy_mmd_start_indirect(phydev, devad, regnum);
+
+       /* Write the data into MMD's selected register */
+       return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
+}
+
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+       int value, ret;
+
+       value = phy_read_mmd(phydev, devad, regnum);
+       if (value < 0)
+               return value;
+
+       value |= val;
+
+       ret = phy_write_mmd(phydev, devad, regnum, value);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ * @return: 0 for success or negative errno for failure
+ */
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+       int value, ret;
+
+       value = phy_read_mmd(phydev, devad, regnum);
+       if (value < 0)
+               return value;
+
+       value &= ~val;
+
+       ret = phy_write_mmd(phydev, devad, regnum, value);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
include/phy.h +9 -181
index b329595710..ad2096ca84 100644
@@ -177,186 +177,6 @@ struct fixed_link {
        int asym_pause;
 };
 
-/**
- * phy_read - Convenience function for reading a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to read
- * @return: value for success or negative errno for failure
- */
-static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
-{
-       struct mii_dev *bus = phydev->bus;
-
-       if (!bus || !bus->read) {
-               debug("%s: No bus configured\n", __func__);
-               return -1;
-       }
-
-       return bus->read(bus, phydev->addr, devad, regnum);
-}
-
-/**
- * phy_write - Convenience function for writing a given PHY register
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
-                       u16 val)
-{
-       struct mii_dev *bus = phydev->bus;
-
-       if (!bus || !bus->write) {
-               debug("%s: No bus configured\n", __func__);
-               return -1;
-       }
-
-       return bus->write(bus, phydev->addr, devad, regnum, val);
-}
-
-/**
- * phy_mmd_start_indirect - Convenience function for writing MMD registers
- * @phydev: the phy_device struct
- * @devad: The MMD to read from
- * @regnum: register number to write
- * @return: None
- */
-static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad,
-                                         int regnum)
-{
-       /* Write the desired MMD Devad */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL, devad);
-
-       /* Write the desired MMD register address */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, regnum);
-
-       /* Select the Function : DATA with no post increment */
-       phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_CTRL,
-                 (devad | MII_MMD_CTRL_NOINCR));
-}
-
-/**
- * phy_read_mmd - Convenience function for reading a register
- * from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @return: Value for success or negative errno for failure
- */
-static inline int phy_read_mmd(struct phy_device *phydev, int devad,
-                              int regnum)
-{
-       struct phy_driver *drv = phydev->drv;
-
-       if (regnum > (u16)~0 || devad > 32)
-               return -EINVAL;
-
-       /* driver-specific access */
-       if (drv->read_mmd)
-               return drv->read_mmd(phydev, devad, regnum);
-
-       /* direct C45 / C22 access */
-       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
-           devad == MDIO_DEVAD_NONE || !devad)
-               return phy_read(phydev, devad, regnum);
-
-       /* indirect C22 access */
-       phy_mmd_start_indirect(phydev, devad, regnum);
-
-       /* Read the content of the MMD's selected register */
-       return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
-}
-
-/**
- * phy_write_mmd - Convenience function for writing a register
- * on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_write_mmd(struct phy_device *phydev, int devad,
-                               int regnum, u16 val)
-{
-       struct phy_driver *drv = phydev->drv;
-
-       if (regnum > (u16)~0 || devad > 32)
-               return -EINVAL;
-
-       /* driver-specific access */
-       if (drv->write_mmd)
-               return drv->write_mmd(phydev, devad, regnum, val);
-
-       /* direct C45 / C22 access */
-       if ((drv->features & PHY_10G_FEATURES) == PHY_10G_FEATURES ||
-           devad == MDIO_DEVAD_NONE || !devad)
-               return phy_write(phydev, devad, regnum, val);
-
-       /* indirect C22 access */
-       phy_mmd_start_indirect(phydev, devad, regnum);
-
-       /* Write the data into MMD's selected register */
-       return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
-}
-
-/**
- * phy_set_bits_mmd - Convenience function for setting bits in a register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to set
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
-                                  u32 regnum, u16 val)
-{
-       int value, ret;
-
-       value = phy_read_mmd(phydev, devad, regnum);
-       if (value < 0)
-               return value;
-
-       value |= val;
-
-       ret = phy_write_mmd(phydev, devad, regnum, value);
-       if (ret < 0)
-               return ret;
-
-       return 0;
-}
-
-/**
- * phy_clear_bits_mmd - Convenience function for clearing bits in a register
- * on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
- * @val: bits to clear
- * @return: 0 for success or negative errno for failure
- */
-static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
-                                    u32 regnum, u16 val)
-{
-       int value, ret;
-
-       value = phy_read_mmd(phydev, devad, regnum);
-       if (value < 0)
-               return value;
-
-       value &= ~val;
-
-       ret = phy_write_mmd(phydev, devad, regnum, value);
-       if (ret < 0)
-               return ret;
-
-       return 0;
-}
-
 #ifdef CONFIG_PHYLIB_10G
 extern struct phy_driver gen10g_driver;
 #endif
@@ -508,6 +328,15 @@ static inline ofnode phy_get_ofnode(struct phy_device *phydev)
        return ofnode_null();
 }
 #endif
+
+int phy_read(struct phy_device *phydev, int devad, int regnum);
+int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val);
+void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum);
+int phy_read_mmd(struct phy_device *phydev, int devad, int regnum);
+int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val);
+int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+
 int phy_startup(struct phy_device *phydev);
 int phy_config(struct phy_device *phydev);
 int phy_shutdown(struct phy_device *phydev);
--

2.30.2

#5 lore raw
In reply to Ramon Fried
Quoted 9 lines · Ramon Fried

The convinience functions are not that small and they caused bloated text segments because of their usage. There was no need to inline them in the first place, as they're not part of a fastpath.

Applied to u-boot/master, thanks!

Signature · 1 line
Tom