staging: Also remove the Unisys visorbus.h
PATCH 1/1 staging: Also remove the Unisys visorbus.h
The commit that removed the Unisys s-Par and visorbus drivers left around the include/linux/visorbus.h file mentioned in the MAINTAINERS entry, we can also remove that too.
Fixes e5f45b011e4a ("staging: Remove the drivers for the Unisys s-Par")
Signed-off-by Peter Robinson <[email protected]>
--- include/linux/visorbus.h | 344 --------------------------------------- 1 file changed, 344 deletions(-) delete mode 100644 include/linux/visorbus.h
include/linux/visorbus.h deleted +0 -344
@@ -1,344 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2010 - 2013 UNISYS CORPORATION -* All rights reserved. -*/ - -/* -* This header file is to be included by other kernel mode components that -* implement a particular kind of visor_device. Each of these other kernel -* mode components is called a visor device driver. Refer to visortemplate -* for a minimal sample visor device driver. -* -* There should be nothing in this file that is private to the visorbus -* bus implementation itself. -*/ - -#ifndef __VISORBUS_H__ -#define __VISORBUS_H__ - -#include <linux/device.h> - -#define VISOR_CHANNEL_SIGNATURE ('L' << 24 | 'N' << 16 | 'C' << 8 | 'E') - -/* -* enum channel_serverstate -* @CHANNELSRV_UNINITIALIZED: Channel is in an undefined state. -* @CHANNELSRV_READY: Channel has been initialized by server. -*/ -enum channel_serverstate { -CHANNELSRV_UNINITIALIZED =0 , -CHANNELSRV_READY =1 -}; - -/* -* enum channel_clientstate -* @CHANNELCLI_DETACHED: -* @CHANNELCLI_DISABLED: Client can see channel but is NOT allowed to use it -* unless given TBD* explicit request -* (should actually be < DETACHED). -* @CHANNELCLI_ATTACHING: Legacy EFI client request for EFI server to attach. -* @CHANNELCLI_ATTACHED: Idle, but client may want to use channel any time. -* @CHANNELCLI_BUSY: Client either wants to use or is using channel. -* @CHANNELCLI_OWNED: "No worries" state - client can access channel -* anytime. -*/ -enum channel_clientstate { -CHANNELCLI_DETACHED =0 , -CHANNELCLI_DISABLED =1 , -CHANNELCLI_ATTACHING =2 , -CHANNELCLI_ATTACHED =3 , -CHANNELCLI_BUSY =4 , -CHANNELCLI_OWNED =5 -}; - -/* -* Values for VISOR_CHANNEL_PROTOCOL.Features: This define exists so that -* a guest can look at the FeatureFlags in the io channel, and configure the -* driver to use interrupts or not based on this setting. All feature bits for -* all channels should be defined here. The io channel feature bits are defined -* below. -*/ -#define VISOR_DRIVER_ENABLES_INTS (0x1ULL << 1) -#define VISOR_CHANNEL_IS_POLLING (0x1ULL << 3) -#define VISOR_IOVM_OK_DRIVER_DISABLING_INTS (0x1ULL << 4) -#define VISOR_DRIVER_DISABLES_INTS (0x1ULL << 5) -#define VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING (0x1ULL << 6) - -/* -* struct channel_header - Common Channel Header -* @signature: Signature. -* @legacy_state: DEPRECATED - being replaced by. -* @header_size: sizeof(struct channel_header). -* @size: Total size of this channel in bytes. -* @features: Flags to modify behavior. -* @chtype: Channel type: data, bus, control, etc.. -* @partition_handle: ID of guest partition. -* @handle: Device number of this channel in client. -* @ch_space_offset: Offset in bytes to channel specific area. -* @version_id: Struct channel_header Version ID. -* @partition_index: Index of guest partition. -* @zone_uuid: Guid of Channel's zone. -* @cli_str_offset: Offset from channel header to null-terminated -* ClientString (0 if ClientString not present). -* @cli_state_boot: CHANNEL_CLIENTSTATE of pre-boot EFI client of this -* channel. -* @cmd_state_cli: CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see -* ServerStateUp, ServerStateDown, etc). -* @cli_state_os: CHANNEL_CLIENTSTATE of Guest OS client of this channel. -* @ch_characteristic: CHANNEL_CHARACTERISTIC_<xxx>. -* @cmd_state_srv: CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see -* ServerStateUp, ServerStateDown, etc). -* @srv_state: CHANNEL_SERVERSTATE. -* @cli_error_boot: Bits to indicate err states for boot clients, so err -* messages can be throttled. -* @cli_error_os: Bits to indicate err states for OS clients, so err -* messages can be throttled. -* @filler: Pad out to 128 byte cacheline. -* @recover_channel: Please add all new single-byte values below here. -*/ -struct channel_header { -u64 signature; -u32 legacy_state; -/* SrvState, CliStateBoot, and CliStateOS below */ -u32 header_size; -u64 size; -u64 features; -guid_t chtype; -u64 partition_handle; -u64 handle; -u64 ch_space_offset; -u32 version_id; -u32 partition_index; -guid_t zone_guid; -u32 cli_str_offset; -u32 cli_state_boot; -u32 cmd_state_cli; -u32 cli_state_os; -u32 ch_characteristic; -u32 cmd_state_srv; -u32 srv_state; -u8 cli_error_boot; -u8 cli_error_os; -u8 filler[1 ]; -u8 recover_channel; -} __packed; - -#define VISOR_CHANNEL_ENABLE_INTS (0x1ULL << 0) - -/* -* struct signal_queue_header - Subheader for the Signal Type variation of the -* Common Channel. -* @version: SIGNAL_QUEUE_HEADER Version ID. -* @chtype: Queue type: storage, network. -* @size: Total size of this queue in bytes. -* @sig_base_offset: Offset to signal queue area. -* @features: Flags to modify behavior. -* @num_sent: Total # of signals placed in this queue. -* @num_overflows: Total # of inserts failed due to full queue. -* @signal_size: Total size of a signal for this queue. -* @max_slots: Max # of slots in queue, 1 slot is always empty. -* @max_signals: Max # of signals in queue (MaxSignalSlots-1). -* @head: Queue head signal #. -* @num_received: Total # of signals removed from this queue. -* @tail: Queue tail signal. -* @reserved1: Reserved field. -* @reserved2: Reserved field. -* @client_queue: -* @num_irq_received: Total # of Interrupts received. This is incremented by the -* ISR in the guest windows driver. -* @num_empty: Number of times that visor_signal_remove is called and -* returned Empty Status. -* @errorflags: Error bits set during SignalReinit to denote trouble with -* client's fields. -* @filler: Pad out to 64 byte cacheline. -*/ -struct signal_queue_header { -/* 1st cache line */ -u32 version; -u32 chtype; -u64 size; -u64 sig_base_offset; -u64 features; -u64 num_sent; -u64 num_overflows; -u32 signal_size; -u32 max_slots; -u32 max_signals; -u32 head; -/* 2nd cache line */ -u64 num_received; -u32 tail; -u32 reserved1; -u64 reserved2; -u64 client_queue; -u64 num_irq_received; -u64 num_empty; -u32 errorflags; -u8 filler[12 ]; -} __packed; - -/* VISORCHANNEL Guids */ -/* {414815ed-c58c-11da-95a9-00e08161165f} */ -#define VISOR_VHBA_CHANNEL_GUID \ - GUID_INIT(0x414815ed, 0xc58c, 0x11da, \ - 0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f) -#define VISOR_VHBA_CHANNEL_GUID_STR \ - "414815ed-c58c-11da-95a9-00e08161165f" -struct visorchipset_state { -u32 created:1 ; -u32 attached:1 ; -u32 configured:1 ; -u32 running:1 ; -/* Remaining bits in this 32-bit word are reserved. */ -}; - -/** -* struct visor_device - A device type for things "plugged" into the visorbus -* bus -* @visorchannel: Points to the channel that the device is -* associated with. -* @channel_type_guid: Identifies the channel type to the bus driver. -* @device: Device struct meant for use by the bus driver -* only. -* @list_all: Used by the bus driver to enumerate devices. -* @timer: Timer fired periodically to do interrupt-type -* activity. -* @being_removed: Indicates that the device is being removed from -* the bus. Private bus driver use only. -* @visordriver_callback_lock: Used by the bus driver to lock when adding and -* removing devices. -* @pausing: Indicates that a change towards a paused state. -* is in progress. Only modified by the bus driver. -* @resuming: Indicates that a change towards a running state -* is in progress. Only modified by the bus driver. -* @chipset_bus_no: Private field used by the bus driver. -* @chipset_dev_no: Private field used the bus driver. -* @state: Used to indicate the current state of the -* device. -* @inst: Unique GUID for this instance of the device. -* @name: Name of the device. -* @pending_msg_hdr: For private use by bus driver to respond to -* hypervisor requests. -* @vbus_hdr_info: A pointer to header info. Private use by bus -* driver. -* @partition_guid: Indicates client partion id. This should be the -* same across all visor_devices in the current -* guest. Private use by bus driver only. -*/ -struct visor_device { -struct visorchannel *visorchannel; -guid_t channel_type_guid; -/* These fields are for private use by the bus driver only. */ -struct device device; -struct list_head list_all; -struct timer_list timer; -bool timer_active; -bool being_removed; -struct mutex visordriver_callback_lock;/* synchronize probe/remove */ -bool pausing; -bool resuming; -u32 chipset_bus_no; -u32 chipset_dev_no; -struct visorchipset_state state; -guid_t inst; -u8 *name; -struct controlvm_message_header *pending_msg_hdr; -void *vbus_hdr_info; -guid_t partition_guid; -struct dentry *debugfs_dir; -struct dentry *debugfs_bus_info; -}; - -#define to_visor_device (x) container_of(x, struct visor_device, device) - -typedef void (*visorbus_state_complete_func ) (struct visor_device *dev, -int status); - -/* -* This struct describes a specific visor channel, by providing its GUID, name, -* and sizes. -*/ -struct visor_channeltype_descriptor { -const guid_t guid; -const char *name; -u64 min_bytes; -u32 version; -}; - -/** -* struct visor_driver - Information provided by each visor driver when it -* registers with the visorbus driver -* @name: Name of the visor driver. -* @owner: The module owner. -* @channel_types: Types of channels handled by this driver, ending with -* a zero GUID. Our specialized BUS.match() method knows -* about this list, and uses it to determine whether this -* driver will in fact handle a new device that it has -* detected. -* @probe: Called when a new device comes online, by our probe() -* function specified by driver.probe() (triggered -* ultimately by some call to driver_register(), -* bus_add_driver(), or driver_attach()). -* @remove: Called when a new device is removed, by our remove() -* function specified by driver.remove() (triggered -* ultimately by some call to device_release_driver()). -* @channel_interrupt: Called periodically, whenever there is a possiblity -* that "something interesting" may have happened to the -* channel. -* @pause: Called to initiate a change of the device's state. If -* the return valu`e is < 0, there was an error and the -* state transition will NOT occur. If the return value -* is >= 0, then the state transition was INITIATED -* successfully, and complete_func() will be called (or -* was just called) with the final status when either the -* state transition fails or completes successfully. -* @resume: Behaves similar to pause. -* @driver: Private reference to the device driver. For use by bus -* driver only. -*/ -struct visor_driver { -const char *name; -struct module *owner; -struct visor_channeltype_descriptor *channel_types; -int (*probe)(struct visor_device *dev); -void (*remove)(struct visor_device *dev); -void (*channel_interrupt)(struct visor_device *dev); -int (*pause)(struct visor_device *dev, -visorbus_state_complete_func complete_func); -int (*resume)(struct visor_device *dev, -visorbus_state_complete_func complete_func); - -/* These fields are for private use by the bus driver only. */ -struct device_driver driver; -}; - -#define to_visor_driver (x) (container_of(x, struct visor_driver, driver)) - -int visor_check_channel (struct channel_header *ch,struct device *dev, -const guid_t *expected_uuid,char *chname, -u64 expected_min_bytes,u32 expected_version, -u64 expected_signature); - -int visorbus_register_visor_driver (struct visor_driver *drv); -void visorbus_unregister_visor_driver (struct visor_driver *drv); -int visorbus_read_channel (struct visor_device *dev, -unsigned long offset,void *dest, -unsigned long nbytes); -int visorbus_write_channel (struct visor_device *dev, -unsigned long offset,void *src, -unsigned long nbytes); -int visorbus_enable_channel_interrupts (struct visor_device *dev); -void visorbus_disable_channel_interrupts (struct visor_device *dev); - -int visorchannel_signalremove (struct visorchannel *channel,u32 queue, -void *msg); -int visorchannel_signalinsert (struct visorchannel *channel,u32 queue, -void *msg); -bool visorchannel_signalempty (struct visorchannel *channel,u32 queue); -const guid_t *visorchannel_get_guid (struct visorchannel *channel); - -#define BUS_ROOT_DEVICE UINT_MAX -struct visor_device *visorbus_get_device_by_id (u32 bus_no,u32 dev_no, -struct visor_device *from); -#endif
Signature · 1 line
2.36.1
Quoted 11 lines · On lunedì 6 giugno 2022 15:22:00 CEST Peter Robinson wrote:
The commit that removed the Unisys s-Par and visorbus drivers left around the
include/linux/visorbus.hfile mentioned in theMAINTAINERSentry, we can also remove that too.Fixes e5f45b011e4a ("staging: Remove the drivers for the Unisys s-Par")Signed-off-by Peter Robinson <[email protected]>--- include/linux/visorbus.h | 344 --------------------------------------- 1 file changed, 344 deletions(-) delete mode 100644 include/linux/visorbus.h
Good catch, I had overlooked this file.
Reviewed-by Fabio M. De Francesco <[email protected]>
Thanks,
Fabio