Skip to contentSkip to conversation

iio: dummy: iio_simple_dummy: check the return value of kstrdup()

PATCH In review Sasha Levin 3 participants 41 messages Jun 7, 2022 – Jun 12, 2022

Subsystems (19)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 2/38 staging: rtl8712: fix a potential memory leak in r871xu_drv_init()

In reply to Sasha Levin

From: Xiaoke Wang <[email protected]>

[ Upstream commit 7288ff561de650d4139fab80e9cb0da9b5b32434 ]

In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit().
To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit().

Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition padapter->bup and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8712_usb_dvobj_deinit() does not rely on padapter->bup and calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for better understading the code.
So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove r8712_free_io_queue() from r8712_free_drv_sw().

---
 drivers/staging/rtl8712/os_intfs.c | 1 -
 drivers/staging/rtl8712/usb_intf.c | 6 +++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/staging/rtl8712/os_intfs.c +0 -1
index 2214aca09730..daa3180dfde3 100644
@@ -332,7 +332,6 @@ void r8712_free_drv_sw(struct _adapter *padapter)
 	r8712_free_evt_priv(&padapter->evtpriv);
 	r8712_DeInitSwLeds(padapter);
 	r8712_free_mlme_priv(&padapter->mlmepriv);
-	r8712_free_io_queue(padapter);
 	_free_xmit_priv(&padapter->xmitpriv);
 	_r8712_free_sta_priv(&padapter->stapriv);
 	_r8712_free_recv_priv(&padapter->recvpriv);
drivers/staging/rtl8712/usb_intf.c +3 -3
index fed96d4251bf..77f090bdd36e 100644
@@ -266,6 +266,7 @@ static uint r8712_usb_dvobj_init(struct _adapter *padapter)
 
 static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
 {
+	r8712_free_io_queue(padapter);
 }
 
 void rtl871x_intf_stop(struct _adapter *padapter)
@@ -303,9 +304,6 @@ void r871x_dev_unload(struct _adapter *padapter)
 			rtl8712_hal_deinit(padapter);
 		}
 
-		/*s6.*/
-		if (padapter->dvobj_deinit)
-			padapter->dvobj_deinit(padapter);
 		padapter->bup = false;
 	}
 }
@@ -610,6 +608,8 @@ static void r871xu_dev_remove(struct usb_interface *pusb_intf)
 	/* Stop driver mlme relation timer */
 	r8712_stop_drv_timers(padapter);
 	r871x_dev_unload(padapter);
+	if (padapter->dvobj_deinit)
+		padapter->dvobj_deinit(padapter);
 	r8712_free_drv_sw(padapter);
 	free_netdev(pnetdev);
 
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/38 drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit 806c7b53414934ba2a39449b31fd1a038e500273 ]

There is a deadlock in ieee80211_beacons_stop(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | ieee80211_send_beacon()
ieee80211_beacons_stop()   |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | ieee80211_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, ieee80211_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.

---
 drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +1 -1
index 690b664df8fa..56a447651644 100644
@@ -528,9 +528,9 @@ static void ieee80211_beacons_stop(struct ieee80211_device *ieee)
 	spin_lock_irqsave(&ieee->beacon_lock, flags);
 
 	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
 
 	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
+	del_timer_sync(&ieee->beacon_timer);
 }
 
 void ieee80211_stop_send_beacons(struct ieee80211_device *ieee)
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/38 drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit 9b6bdbd9337de3917945847bde262a34a87a6303 ]

There is a deadlock in rtllib_beacons_stop(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | rtllib_send_beacon()
rtllib_beacons_stop()      |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | rtllib_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, rtllib_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.

---
 drivers/staging/rtl8192e/rtllib_softmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192e/rtllib_softmac.c +1 -1
index e8e72f79ca00..aeb6f015fdda 100644
@@ -651,9 +651,9 @@ static void rtllib_beacons_stop(struct rtllib_device *ieee)
 	spin_lock_irqsave(&ieee->beacon_lock, flags);
 
 	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
 
 	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
+	del_timer_sync(&ieee->beacon_timer);
 
 }
 
Signature · 1 line
2.35.1
author maintainer
#12 lore raw

PATCH 13/38 sysrq: do not omit current cpu when showing backtrace of all active CPUs

In reply to Sasha Levin

From: Changbin Du <[email protected]>

[ Upstream commit 5390e7f46b9d5546d45a83e6463bc656678b1d0e ]

The backtrace of current CPU also should be printed as it is active. This change add stack trace for current CPU and print a hint for idle CPU for the generic workqueue based printing. (x86 already does this)

Now it looks like below:

[  279.401567] sysrq: Show backtrace of all active CPUs
[  279.407234] sysrq: CPU5:
[  279.407505] Call Trace:
[  279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[  279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[  279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[  279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[  279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[  279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[  279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[  279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[  279.417173] sysrq: CPU6: backtrace skipped as idling
[  279.417185] sysrq: CPU4: backtrace skipped as idling
[  279.417187] sysrq: CPU0: backtrace skipped as idling
[  279.417181] sysrq: CPU7: backtrace skipped as idling
[  279.417190] sysrq: CPU1: backtrace skipped as idling
[  279.417193] sysrq: CPU3: backtrace skipped as idling
[  279.417219] sysrq: CPU2:
[  279.419179] Call Trace:
[  279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[  279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[  279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[  279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[  279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[  279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[  279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[  279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e
---
 drivers/tty/sysrq.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/tty/sysrq.c +9 -4
index 959f9e121cc6..7ca209d4e088 100644
@@ -231,8 +231,10 @@ static void showacpu(void *dummy)
 	unsigned long flags;
 
 	/* Idle CPUs have no interesting backtrace. */
-	if (idle_cpu(smp_processor_id()))
+	if (idle_cpu(smp_processor_id())) {
+		pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
 		return;
+	}
 
 	raw_spin_lock_irqsave(&show_lock, flags);
 	pr_info("CPU%d:\n", smp_processor_id());
@@ -259,10 +261,13 @@ static void sysrq_handle_showallcpus(int key)
 
 		if (in_irq())
 			regs = get_irq_regs();
-		if (regs) {
-			pr_info("CPU%d:\n", smp_processor_id());
+
+		pr_info("CPU%d:\n", smp_processor_id());
+		if (regs)
 			show_regs(regs);
-		}
+		else
+			show_stack(NULL, NULL, KERN_INFO);
+
 		schedule_work(&sysrq_showallcpus);
 	}
 }
Signature · 7 lines
2.35.1


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
author maintainer
#17 lore raw

PATCH 18/38 staging: rtl8712: fix uninit-value in usb_read8() and friends

In reply to Sasha Levin

From: Wang Cheng <[email protected]>

[ Upstream commit d1b57669732d09da7e13ef86d058dab0cd57f6e0 ]

When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized.

BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline]
BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725
 string_nocheck lib/vsprintf.c:643 [inline]
 string+0x4ec/0x6f0 lib/vsprintf.c:725
 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
 va_format lib/vsprintf.c:1704 [inline]
 pointer+0x18e6/0x1f70 lib/vsprintf.c:2443
 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810
 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604
 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615
 __dev_printk+0x3be/0x440 drivers/base/core.c:4627
 _dev_info+0x1ea/0x22f drivers/base/core.c:4673
 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x6c7/0x1350 drivers/base/dd.c:621
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5363 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
 port_event drivers/usb/core/hub.c:5665 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289
 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436
 kthread+0x3c7/0x500 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

Local variable data created at:

 usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33
 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

---
 drivers/staging/rtl8712/usb_ops.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/staging/rtl8712/usb_ops.c +18 -9
index e64845e6adf3..af9966d03979 100644
@@ -29,7 +29,8 @@ static u8 usb_read8(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -37,8 +38,10 @@ static u8 usb_read8(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 1;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return (u8)(le32_to_cpu(data) & 0x0ff);
 }
 
@@ -49,7 +52,8 @@ static u16 usb_read16(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -57,8 +61,10 @@ static u16 usb_read16(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 2;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return (u16)(le32_to_cpu(data) & 0xffff);
 }
 
@@ -69,7 +75,8 @@ static u32 usb_read32(struct intf_hdl *intfhdl, u32 addr)
 	u16 wvalue;
 	u16 index;
 	u16 len;
-	__le32 data;
+	int status;
+	__le32 data = 0;
 	struct intf_priv *intfpriv = intfhdl->pintfpriv;
 
 	request = 0x05;
@@ -77,8 +84,10 @@ static u32 usb_read32(struct intf_hdl *intfhdl, u32 addr)
 	index = 0;
 	wvalue = (u16)(addr & 0x0000ffff);
 	len = 4;
-	r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index, &data, len,
-				requesttype);
+	status = r8712_usbctrl_vendorreq(intfpriv, request, wvalue, index,
+					 &data, len, requesttype);
+	if (status < 0)
+		return 0;
 	return le32_to_cpu(data);
 }
 
Signature · 1 line
2.35.1
author maintainer
#18 lore raw

PATCH 19/38 staging: rtl8712: fix uninit-value in r871xu_drv_init()

In reply to Sasha Levin

From: Wang Cheng <[email protected]>

[ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ]

When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized.

BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5358 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
 port_event drivers/usb/core/hub.c:5660 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
 kthread+0x3c7/0x500 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

Local variable mac created at:

 r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

---
 drivers/staging/rtl8712/usb_intf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8712/usb_intf.c +3 -3
index 77f090bdd36e..68d66c3ce2c8 100644
@@ -539,13 +539,13 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 		} else {
 			AutoloadFail = false;
 		}
-		if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
+		if ((!AutoloadFail) ||
+		    ((mac[0] == 0xff) && (mac[1] == 0xff) &&
 		     (mac[2] == 0xff) && (mac[3] == 0xff) &&
 		     (mac[4] == 0xff) && (mac[5] == 0xff)) ||
 		    ((mac[0] == 0x00) && (mac[1] == 0x00) &&
 		     (mac[2] == 0x00) && (mac[3] == 0x00) &&
-		     (mac[4] == 0x00) && (mac[5] == 0x00)) ||
-		     (!AutoloadFail)) {
+		     (mac[4] == 0x00) && (mac[5] == 0x00))) {
 			mac[0] = 0x00;
 			mac[1] = 0xe0;
 			mac[2] = 0x4c;
Signature · 1 line
2.35.1
author maintainer
#31 lore raw

PATCH 29/38 drm/radeon: fix a possible null pointer dereference

In reply to Sasha Levin

From: Gong Yuanjun <[email protected]>

[ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ]

In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

The failure status of drm_cvt_mode() on the other path is checked too.

---
 drivers/gpu/drm/radeon/radeon_connectors.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/radeon/radeon_connectors.c +4 -0
index e30834434442..ef111d460be2 100644
@@ -473,6 +473,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 	    native_mode->vdisplay != 0 &&
 	    native_mode->clock != 0) {
 		mode = drm_mode_duplicate(dev, native_mode);
+		if (!mode)
+			return NULL;
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		drm_mode_set_name(mode);
 
@@ -487,6 +489,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 		 * simpler.
 		 */
 		mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+		if (!mode)
+			return NULL;
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
 	}
Signature · 1 line
2.35.1
author maintainer
#26 lore raw

PATCH 24/38 md: don't unregister sync_thread with reconfig_mutex held

In reply to Sasha Levin

From: Guoqing Jiang <[email protected]>

[ Upstream commit 8b48ec23cc51a4e7c8dbaef5f34ebe67e1a80934 ]

Unregister sync_thread doesn't need to hold reconfig_mutex since it doesn't reconfigure array.

And it could cause deadlock problem for raid5 as follows:

1. process A tried to reap sync thread with reconfig_mutex held after echo idle to sync_action.
2. raid5 sync thread was blocked if there were too many active stripes.
3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer) which causes the number of active stripes can't be decreased.
4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able to hold reconfig_mutex.

More details in the link:
https://lore.kernel.org/linux-raid/[email protected]/T/#t

And add one parameter to md_reap_sync_thread since it could be called by dm-raid which doesn't hold reconfig_mutex.

---
 drivers/md/dm-raid.c |  2 +-
 drivers/md/md.c      | 14 +++++++++-----
 drivers/md/md.h      |  2 +-
 3 files changed, 11 insertions(+), 7 deletions(-)
drivers/md/dm-raid.c +1 -1
index f5083b4a0195..95380e91d59a 100644
@@ -3691,7 +3691,7 @@ static int raid_message(struct dm_target *ti, unsigned int argc, char **argv,
 	if (!strcasecmp(argv[0], "idle") || !strcasecmp(argv[0], "frozen")) {
 		if (mddev->sync_thread) {
 			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-			md_reap_sync_thread(mddev);
+			md_reap_sync_thread(mddev, false);
 		}
 	} else if (decipher_sync_action(mddev, mddev->recovery) != st_idle)
 		return -EBUSY;
drivers/md/md.c +9 -5
index cc3876500c4b..e4e855976dca 100644
@@ -4862,7 +4862,7 @@ action_store(struct mddev *mddev, const char *page, size_t len)
 				flush_workqueue(md_misc_wq);
 			if (mddev->sync_thread) {
 				set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-				md_reap_sync_thread(mddev);
+				md_reap_sync_thread(mddev, true);
 			}
 			mddev_unlock(mddev);
 		}
@@ -6229,7 +6229,7 @@ static void __md_stop_writes(struct mddev *mddev)
 		flush_workqueue(md_misc_wq);
 	if (mddev->sync_thread) {
 		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-		md_reap_sync_thread(mddev);
+		md_reap_sync_thread(mddev, true);
 	}
 
 	del_timer_sync(&mddev->safemode_timer);
@@ -9254,7 +9254,7 @@ void md_check_recovery(struct mddev *mddev)
 			 * ->spare_active and clear saved_raid_disk
 			 */
 			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-			md_reap_sync_thread(mddev);
+			md_reap_sync_thread(mddev, true);
 			clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
 			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			clear_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags);
@@ -9289,7 +9289,7 @@ void md_check_recovery(struct mddev *mddev)
 			goto unlock;
 		}
 		if (mddev->sync_thread) {
-			md_reap_sync_thread(mddev);
+			md_reap_sync_thread(mddev, true);
 			goto unlock;
 		}
 		/* Set RUNNING before clearing NEEDED to avoid
@@ -9362,14 +9362,18 @@ void md_check_recovery(struct mddev *mddev)
 }
 EXPORT_SYMBOL(md_check_recovery);
 
-void md_reap_sync_thread(struct mddev *mddev)
+void md_reap_sync_thread(struct mddev *mddev, bool reconfig_mutex_held)
 {
 	struct md_rdev *rdev;
 	sector_t old_dev_sectors = mddev->dev_sectors;
 	bool is_reshaped = false;
 
+	if (reconfig_mutex_held)
+		mddev_unlock(mddev);
 	/* resync has finished, collect result */
 	md_unregister_thread(&mddev->sync_thread);
+	if (reconfig_mutex_held)
+		mddev_lock_nointr(mddev);
 	if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
 	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
 	    mddev->degraded != mddev->raid_disks) {
drivers/md/md.h +1 -1
index c94811cf2600..9ac60a5df73e 100644
@@ -704,7 +704,7 @@ extern struct md_thread *md_register_thread(
 extern void md_unregister_thread(struct md_thread **threadp);
 extern void md_wakeup_thread(struct md_thread *thread);
 extern void md_check_recovery(struct mddev *mddev);
-extern void md_reap_sync_thread(struct mddev *mddev);
+extern void md_reap_sync_thread(struct mddev *mddev, bool reconfig_mutex_held);
 extern int mddev_init_writes_pending(struct mddev *mddev);
 extern bool md_write_start(struct mddev *mddev, struct bio *bi);
 extern void md_write_inc(struct mddev *mddev, struct bio *bi);
Signature · 6 lines
2.35.1

--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/38 iio: dummy: iio_simple_dummy: check the return value of kstrdup()

From: Xiaoke Wang <[email protected]>

[ Upstream commit ba93642188a6fed754bf7447f638bc410e05a929 ]

kstrdup() is also a memory allocation-related function, it returns NULL when some memory errors happen. So it is better to check the return value of it so to catch the memory error in time. Besides, there should have a kfree() to clear up the allocation if we get a failure later in this function to prevent memory leak.

---
 drivers/iio/dummy/iio_simple_dummy.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/iio/dummy/iio_simple_dummy.c +12 -8
index c0b7ef900735..c24f609c2ade 100644
@@ -575,10 +575,9 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	 */
 
 	swd = kzalloc(sizeof(*swd), GFP_KERNEL);
-	if (!swd) {
-		ret = -ENOMEM;
-		goto error_kzalloc;
-	}
+	if (!swd)
+		return ERR_PTR(-ENOMEM);
+
 	/*
 	 * Allocate an IIO device.
 	 *
@@ -590,7 +589,7 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	indio_dev = iio_device_alloc(parent, sizeof(*st));
 	if (!indio_dev) {
 		ret = -ENOMEM;
-		goto error_ret;
+		goto error_free_swd;
 	}
 
 	st = iio_priv(indio_dev);
@@ -616,6 +615,10 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	 *    indio_dev->name = spi_get_device_id(spi)->name;
 	 */
 	indio_dev->name = kstrdup(name, GFP_KERNEL);
+	if (!indio_dev->name) {
+		ret = -ENOMEM;
+		goto error_free_device;
+	}
 
 	/* Provide description of available channels */
 	indio_dev->channels = iio_dummy_channels;
@@ -632,7 +635,7 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 
 	ret = iio_simple_dummy_events_register(indio_dev);
 	if (ret < 0)
-		goto error_free_device;
+		goto error_free_name;
 
 	ret = iio_simple_dummy_configure_buffer(indio_dev);
 	if (ret < 0)
@@ -649,11 +652,12 @@ static struct iio_sw_device *iio_dummy_probe(const char *name)
 	iio_simple_dummy_unconfigure_buffer(indio_dev);
 error_unregister_events:
 	iio_simple_dummy_events_unregister(indio_dev);
+error_free_name:
+	kfree(indio_dev->name);
 error_free_device:
 	iio_device_free(indio_dev);
-error_ret:
+error_free_swd:
 	kfree(swd);
-error_kzalloc:
 	return ERR_PTR(ret);
 }
 
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/38 lkdtm/usercopy: Expand size of "out of frame" object

From: Kees Cook <[email protected]>

[ Upstream commit f387e86d3a74407bdd9c5815820ac9d060962840 ]

To be sufficiently out of range for the usercopy test to see the lifetime mismatch, expand the size of the "bad" buffer, which will let it be beyond current_stack_pointer regardless of stack growth direction. Paired with the recent addition of stack depth checking under CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again.

---
 drivers/misc/lkdtm/usercopy.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/misc/lkdtm/usercopy.c +14 -3
index 109e8d4302c1..cde2655487ff 100644
@@ -30,12 +30,12 @@ static const unsigned char test_text[] = "This is a test.\n";
  */
 static noinline unsigned char *trick_compiler(unsigned char *stack)
 {
-	return stack + 0;
+	return stack + unconst;
 }
 
 static noinline unsigned char *do_usercopy_stack_callee(int value)
 {
-	unsigned char buf[32];
+	unsigned char buf[128];
 	int i;
 
 	/* Exercise stack to avoid everything living in registers. */
@@ -43,7 +43,12 @@ static noinline unsigned char *do_usercopy_stack_callee(int value)
 		buf[i] = value & 0xff;
 	}
 
-	return trick_compiler(buf);
+	/*
+	 * Put the target buffer in the middle of stack allocation
+	 * so that we don't step on future stack users regardless
+	 * of stack growth direction.
+	 */
+	return trick_compiler(&buf[(128/2)-32]);
 }
 
 static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
@@ -66,6 +71,12 @@ static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
 		bad_stack -= sizeof(unsigned long);
 	}
 
+#ifdef ARCH_HAS_CURRENT_STACK_POINTER
+	pr_info("stack     : %px\n", (void *)current_stack_pointer);
+#endif
+	pr_info("good_stack: %px-%px\n", good_stack, good_stack + sizeof(good_stack));
+	pr_info("bad_stack : %px-%px\n", bad_stack, bad_stack + sizeof(good_stack));
+
 	user_addr = vm_mmap(NULL, 0, PAGE_SIZE,
 			    PROT_READ | PROT_WRITE | PROT_EXEC,
 			    MAP_ANONYMOUS | MAP_PRIVATE, 0);
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/38 tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

In reply to Sasha Levin

From: Zheyu Ma <[email protected]>

[ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ]

When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat:

[   25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[   25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[   25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[   25.077709] Call Trace:
[   25.077924]  <TASK>
[   25.078108]  unregister_hdlc_device+0x16/0x30
[   25.078481]  slgt_cleanup+0x157/0x9f0 [synclink_gt]

Fix this by checking whether the 'info->netdev' is a null pointer first.

---
 drivers/tty/synclink_gt.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/tty/synclink_gt.c +2 -0
index 1a0c7beec101..0569d5949133 100644
@@ -1749,6 +1749,8 @@ static int hdlcdev_init(struct slgt_info *info)
  */
 static void hdlcdev_exit(struct slgt_info *info)
 {
+	if (!info->netdev)
+		return;
 	unregister_hdlc_device(info->netdev);
 	free_netdev(info->netdev);
 	info->netdev = NULL;
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/38 tty: Fix a possible resource leak in icom_probe

In reply to Sasha Levin

From: Huang Guobin <[email protected]>

[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ]

When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated.

---
 drivers/tty/serial/icom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/icom.c +1 -1
index 94c8281ddb5f..74b325c344da 100644
@@ -1503,7 +1503,7 @@ static int icom_probe(struct pci_dev *dev,
 	retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
 	if (retval) {
 		dev_err(&dev->dev, "PCI Config read FAILED\n");
-		return retval;
+		goto probe_exit0;
 	}
 
 	pci_write_config_dword(dev, PCI_COMMAND,
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/38 iio: st_sensors: Add a local lock for protecting odr

In reply to Sasha Levin

From: Miquel Raynal <[email protected]>

[ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ]

Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running

Let's start by handling situation #1 with a local lock.

---
 .../iio/common/st_sensors/st_sensors_core.c   | 24 ++++++++++++++-----
 include/linux/iio/common/st_sensors.h         |  3 +++
 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/iio/common/st_sensors/st_sensors_core.c +18 -6
index 7a69c1be7393..56206fdbceb9 100644
@@ -70,16 +70,18 @@ static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
 
 int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 {
-	int err;
+	int err = 0;
 	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
+	mutex_lock(&sdata->odr_lock);
+
 	if (!sdata->sensor_settings->odr.mask)
-		return 0;
+		goto unlock_mutex;
 
 	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
 	if (err < 0)
-		goto st_sensors_match_odr_error;
+		goto unlock_mutex;
 
 	if ((sdata->sensor_settings->odr.addr ==
 					sdata->sensor_settings->pw.addr) &&
@@ -102,7 +104,9 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 	if (err >= 0)
 		sdata->odr = odr_out.hz;
 
-st_sensors_match_odr_error:
+unlock_mutex:
+	mutex_unlock(&sdata->odr_lock);
+
 	return err;
 }
 EXPORT_SYMBOL(st_sensors_set_odr);
@@ -364,6 +368,8 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	struct st_sensors_platform_data *of_pdata;
 	int err = 0;
 
+	mutex_init(&sdata->odr_lock);
+
 	/* If OF/DT pdata exists, it will take precedence of anything else */
 	of_pdata = st_sensors_dev_probe(indio_dev->dev.parent, pdata);
 	if (IS_ERR(of_pdata))
@@ -557,18 +563,24 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 		err = -EBUSY;
 		goto out;
 	} else {
+		mutex_lock(&sdata->odr_lock);
 		err = st_sensors_set_enable(indio_dev, true);
-		if (err < 0)
+		if (err < 0) {
+			mutex_unlock(&sdata->odr_lock);
 			goto out;
+		}
 
 		msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
 		err = st_sensors_read_axis_data(indio_dev, ch, val);
-		if (err < 0)
+		if (err < 0) {
+			mutex_unlock(&sdata->odr_lock);
 			goto out;
+		}
 
 		*val = *val >> ch->scan_type.shift;
 
 		err = st_sensors_set_enable(indio_dev, false);
+		mutex_unlock(&sdata->odr_lock);
 	}
 out:
 	mutex_unlock(&indio_dev->mlock);
include/linux/iio/common/st_sensors.h +3 -0
index 33e939977444..c16a9dda3ad5 100644
@@ -228,6 +228,7 @@ struct st_sensor_settings {
  * @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
  * @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
  * @buffer_data: Data used by buffer part.
+ * @odr_lock: Local lock for preventing concurrent ODR accesses/changes
  */
 struct st_sensor_data {
 	struct device *dev;
@@ -253,6 +254,8 @@ struct st_sensor_data {
 	s64 hw_timestamp;
 
 	char buffer_data[ST_SENSORS_MAX_BUFFER_SIZE] ____cacheline_aligned;
+
+	struct mutex odr_lock;
 };
 
 #ifdef CONFIG_IIO_BUFFER
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 14/38 usb: dwc2: gadget: don't reset gadget's driver->bus

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ]

UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference:

dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---

Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0

...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54

Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---

Fix this by removing driver->bus entry reset.

---
 drivers/usb/dwc2/gadget.c | 1 -
 1 file changed, 1 deletion(-)
drivers/usb/dwc2/gadget.c +0 -1
index ec54971063f8..64485f82dc5b 100644
@@ -4518,7 +4518,6 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
 
 	WARN_ON(hsotg->driver);
 
-	driver->driver.bus = NULL;
 	hsotg->driver = driver;
 	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 9/38 USB: host: isp116x: check return value after calling platform_get_resource()

In reply to Sasha Levin

From: Zhen Ni <[email protected]>

[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

---
 drivers/usb/host/isp116x-hcd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/host/isp116x-hcd.c +4 -2
index 3055d9abfec3..3e5c54742bef 100644
@@ -1541,10 +1541,12 @@ static int isp116x_remove(struct platform_device *pdev)
 
 	iounmap(isp116x->data_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	release_mem_region(res->start, 2);
+	if (res)
+		release_mem_region(res->start, 2);
 	iounmap(isp116x->addr_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, 2);
+	if (res)
+		release_mem_region(res->start, 2);
 
 	usb_put_hcd(hcd);
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 11/38 drivers: usb: host: Fix deadlock in oxu_bus_suspend()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ]

There is a deadlock in oxu_bus_suspend(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | timer_action()
oxu_bus_suspend()          |  mod_timer()
 spin_lock_irq() //(1)     |  (wait a time)
 ...                       | oxu_watchdog()
 del_timer_sync()          |  spin_lock_irq() //(2)
 (wait timer to stop)      |  ...

We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever.

This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock.

---
 drivers/usb/host/oxu210hp-hcd.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/host/oxu210hp-hcd.c +2 -0
index e832909a924f..6df2881cd7b9 100644
@@ -3908,8 +3908,10 @@ static int oxu_bus_suspend(struct usb_hcd *hcd)
 		}
 	}
 
+	spin_unlock_irq(&oxu->lock);
 	/* turn off now-idle HC */
 	del_timer_sync(&oxu->watchdog);
+	spin_lock_irq(&oxu->lock);
 	ehci_halt(oxu);
 	hcd->state = HC_STATE_SUSPENDED;
 
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 10/38 drivers: tty: serial: Fix deadlock in sa1100_set_termios()

In reply to Sasha Levin

From: Duoming Zhou <[email protected]>

[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]

There is a deadlock in sa1100_set_termios(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | sa1100_enable_ms()
sa1100_set_termios()       |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | sa1100_timeout()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold sport->port.lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need sport->port.lock in position (2) of thread 2. As a result, sa1100_set_termios() will block forever.

This patch moves del_timer_sync() before spin_lock_irqsave() in order to prevent the deadlock.

---
 drivers/tty/serial/sa1100.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/tty/serial/sa1100.c +2 -2
index f5fab1dd96bc..aa1cf2ae17a9 100644
@@ -448,6 +448,8 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
 
+	del_timer_sync(&sport->timer);
+
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
@@ -478,8 +480,6 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 				UTSR1_TO_SM(UTSR1_ROR);
 	}
 
-	del_timer_sync(&sport->timer);
-
 	/*
 	 * Update the per-port timeout.
 	 */
Signature · 1 line
2.35.1
author maintainer
#11 lore raw

PATCH 12/38 USB: hcd-pci: Fully suspend across freeze/thaw cycle

In reply to Sasha Levin

From: Evan Green <[email protected]>

[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ]

The documentation for the freeze() method says that it "should quiesce the device so that it doesn't generate IRQs or DMA". The unspoken consequence of not doing this is that MSIs aimed at non-boot CPUs may get fully lost if they're sent during the period where the target CPU is offline.

The current callbacks for USB HCD do not fully quiesce interrupts, specifically on XHCI. Change to use the full suspend/resume flow for freeze/thaw to ensure interrupts are fully quiesced. This fixes issues where USB devices fail to thaw during hibernation because XHCI misses its interrupt and cannot recover.

---
 drivers/usb/core/hcd-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/core/hcd-pci.c +2 -2
index ec0d6c50610c..eee78cbfaa72 100644
@@ -614,10 +614,10 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend_noirq	= hcd_pci_suspend_noirq,
 	.resume_noirq	= hcd_pci_resume_noirq,
 	.resume		= hcd_pci_resume,
-	.freeze		= check_root_hub_suspended,
+	.freeze		= hcd_pci_suspend,
 	.freeze_noirq	= check_root_hub_suspended,
 	.thaw_noirq	= NULL,
-	.thaw		= NULL,
+	.thaw		= hcd_pci_resume,
 	.poweroff	= hcd_pci_suspend,
 	.poweroff_noirq	= hcd_pci_suspend_noirq,
 	.restore_noirq	= hcd_pci_resume_noirq,
Signature · 1 line
2.35.1
author maintainer
#14 lore raw

PATCH 15/38 misc: rtsx: set NULL intfdata when probe fails

In reply to Sasha Levin

From: Shuah Khan <[email protected]>

[ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ]

rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the interface pointer when probe fails. This leaves a stale pointer. Noticed the missing usb_set_intfdata() while debugging an unrelated invalid DMA mapping problem.

Fix it with a call to usb_set_intfdata(..., NULL).

---
 drivers/misc/cardreader/rtsx_usb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/misc/cardreader/rtsx_usb.c +1 -0
index 59eda55d92a3..1ef9b61077c4 100644
@@ -667,6 +667,7 @@ static int rtsx_usb_probe(struct usb_interface *intf,
 	return 0;
 
 out_init_fail:
+	usb_set_intfdata(ucr->pusb_intf, NULL);
 	usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
 			ucr->iobuf_dma);
 	return ret;
Signature · 1 line
2.35.1
author maintainer
#20 lore raw

PATCH 21/38 accessiblity: speakup: Add missing misc_deregister in softsynth_probe

In reply to Sasha Levin

From: Zheng Bin <[email protected]>

[ Upstream commit 106101303eda8f93c65158e5d72b2cc6088ed034 ]

softsynth_probe misses a call misc_deregister() in an error path, this patch fixes that.

---
 drivers/accessibility/speakup/speakup_soft.c | 1 +
 1 file changed, 1 insertion(+)
drivers/accessibility/speakup/speakup_soft.c +1 -0
index 9a7029539f35..a5172a4d8375 100644
@@ -390,6 +390,7 @@ static int softsynth_probe(struct spk_synth *synth)
 	synthu_device.name = "softsynthu";
 	synthu_device.fops = &softsynthu_fops;
 	if (misc_register(&synthu_device)) {
+		misc_deregister(&synth_device);
 		pr_warn("Couldn't initialize miscdevice /dev/softsynthu.\n");
 		return -ENODEV;
 	}
Signature · 1 line
2.35.1
author maintainer
#25 lore raw

PATCH 23/38 watchdog: wdat_wdt: Stop watchdog when rebooting the system

In reply to Sasha Levin

From: Liu Xinpeng <[email protected]>

[ Upstream commit 27fdf84510a1374748904db43f6755f912736d92 ]

Executing reboot command several times on the machine "Dell PowerEdge R740", UEFI security detection stopped machine with the following prompt:

UEFI0082: The system was reset due to a timeout from the watchdog timer. Check the System Event Log (SEL) or crash dumps from Operating Sysstem to identify the source that triggered the watchdog timer reset. Update the firmware or driver for the identified device.

iDRAC has warning event: "The watchdog timer reset the system".

This patch fixes this issue by adding the reboot notifier.

---
 drivers/watchdog/wdat_wdt.c | 1 +
 1 file changed, 1 insertion(+)
drivers/watchdog/wdat_wdt.c +1 -0
index 3065dd670a18..c60723f5ed99 100644
@@ -462,6 +462,7 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		return ret;
 
 	watchdog_set_nowayout(&wdat->wdd, nowayout);
+	watchdog_stop_on_reboot(&wdat->wdd);
 	return devm_watchdog_register_device(dev, &wdat->wdd);
 }
 
Signature · 1 line
2.35.1
author maintainer
#24 lore raw

PATCH 22/38 kernfs: Separate kernfs_pr_cont_buf and rename_lock.

In reply to Sasha Levin

From: Hao Luo <[email protected]>

[ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ]

Previously the protection of kernfs_pr_cont_buf was piggy backed by rename_lock, which means that pr_cont() needs to be protected under rename_lock. This can cause potential circular lock dependencies.

If there is an OOM, we have the following call hierarchy:

-> cpuset_print_current_mems_allowed()
-> pr_cont_cgroup_name()

     -> pr_cont_kernfs_name()

pr_cont_kernfs_name() will grab rename_lock and call printk. So we have the following lock dependencies:

kernfs_rename_lock -> console_sem

Sometimes, printk does a wakeup before releasing console_sem, which has the dependence chain:

console_sem -> p->pi_lock -> rq->lock

Now, imagine one wants to read cgroup_name under rq->lock, for example, printing cgroup_name in a tracepoint in the scheduler code. They will be holding rq->lock and take rename_lock:

rq->lock -> kernfs_rename_lock

Now they will deadlock.

A prevention to this circular lock dependency is to separate the protection of pr_cont_buf from rename_lock. In principle, rename_lock is to protect the integrity of cgroup name when copying to buf. Once pr_cont_buf has got its content, rename_lock can be dropped. So it's safe to drop rename_lock after kernfs_name_locked (and kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock to protect pr_cont_buf.

---
 fs/kernfs/dir.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
fs/kernfs/dir.c +19 -12
index 9aec80b9d7c6..afb39e1bbe3b 100644
@@ -19,7 +19,15 @@
 
 DEFINE_MUTEX(kernfs_mutex);
 static DEFINE_SPINLOCK(kernfs_rename_lock);	/* kn->parent and ->name */
-static char kernfs_pr_cont_buf[PATH_MAX];	/* protected by rename_lock */
+/*
+ * Don't use rename_lock to piggy back on pr_cont_buf. We don't want to
+ * call pr_cont() while holding rename_lock. Because sometimes pr_cont()
+ * will perform wakeups when releasing console_sem. Holding rename_lock
+ * will introduce deadlock if the scheduler reads the kernfs_name in the
+ * wakeup path.
+ */
+static DEFINE_SPINLOCK(kernfs_pr_cont_lock);
+static char kernfs_pr_cont_buf[PATH_MAX];	/* protected by pr_cont_lock */
 static DEFINE_SPINLOCK(kernfs_idr_lock);	/* root->ino_idr */
 
 #define rb_to_kn(X) rb_entry((X), struct kernfs_node, rb)
@@ -230,12 +238,12 @@ void pr_cont_kernfs_name(struct kernfs_node *kn)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&kernfs_rename_lock, flags);
+	spin_lock_irqsave(&kernfs_pr_cont_lock, flags);
 
-	kernfs_name_locked(kn, kernfs_pr_cont_buf, sizeof(kernfs_pr_cont_buf));
+	kernfs_name(kn, kernfs_pr_cont_buf, sizeof(kernfs_pr_cont_buf));
 	pr_cont("%s", kernfs_pr_cont_buf);
 
-	spin_unlock_irqrestore(&kernfs_rename_lock, flags);
+	spin_unlock_irqrestore(&kernfs_pr_cont_lock, flags);
 }
 
 /**
@@ -249,10 +257,10 @@ void pr_cont_kernfs_path(struct kernfs_node *kn)
 	unsigned long flags;
 	int sz;
 
-	spin_lock_irqsave(&kernfs_rename_lock, flags);
+	spin_lock_irqsave(&kernfs_pr_cont_lock, flags);
 
-	sz = kernfs_path_from_node_locked(kn, NULL, kernfs_pr_cont_buf,
-					  sizeof(kernfs_pr_cont_buf));
+	sz = kernfs_path_from_node(kn, NULL, kernfs_pr_cont_buf,
+				   sizeof(kernfs_pr_cont_buf));
 	if (sz < 0) {
 		pr_cont("(error)");
 		goto out;
@@ -266,7 +274,7 @@ void pr_cont_kernfs_path(struct kernfs_node *kn)
 	pr_cont("%s", kernfs_pr_cont_buf);
 
 out:
-	spin_unlock_irqrestore(&kernfs_rename_lock, flags);
+	spin_unlock_irqrestore(&kernfs_pr_cont_lock, flags);
 }
 
 /**
@@ -864,13 +872,12 @@ static struct kernfs_node *kernfs_walk_ns(struct kernfs_node *parent,
 
 	lockdep_assert_held(&kernfs_mutex);
 
-	/* grab kernfs_rename_lock to piggy back on kernfs_pr_cont_buf */
-	spin_lock_irq(&kernfs_rename_lock);
+	spin_lock_irq(&kernfs_pr_cont_lock);
 
 	len = strlcpy(kernfs_pr_cont_buf, path, sizeof(kernfs_pr_cont_buf));
 
 	if (len >= sizeof(kernfs_pr_cont_buf)) {
-		spin_unlock_irq(&kernfs_rename_lock);
+		spin_unlock_irq(&kernfs_pr_cont_lock);
 		return NULL;
 	}
 
@@ -882,7 +889,7 @@ static struct kernfs_node *kernfs_walk_ns(struct kernfs_node *parent,
 		parent = kernfs_find_ns(parent, name, ns);
 	}
 
-	spin_unlock_irq(&kernfs_rename_lock);
+	spin_unlock_irq(&kernfs_pr_cont_lock);
 
 	return parent;
 }
Signature · 1 line
2.35.1
author maintainer
#32 lore raw

PATCH 30/38 modpost: fix undefined behavior of is_arm_mapping_symbol()

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ]

The return value of is_arm_mapping_symbol() is unpredictable when "$" is passed in.

strchr(3) says:
The strchr() and strrchr() functions return a pointer to the matched character or NULL if the character is not found. The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator.

When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is referenced (i.e. buffer overrun).

Test code
---------

  char str1[] = "abc";
  char str2[] = "ab";

  strcpy(str1, "$");
  strcpy(str2, "$");

  printf("test1: %d\n", is_arm_mapping_symbol(str1));
  printf("test2: %d\n", is_arm_mapping_symbol(str2));

Result
------

test1: 0
test2: 1

---
 scripts/mod/modpost.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
scripts/mod/modpost.c +2 -1
index e08f75aed429..2d3c3962c229 100644
@@ -1271,7 +1271,8 @@ static int secref_whitelist(const struct sectioncheck *mismatch,
 
 static inline int is_arm_mapping_symbol(const char *str)
 {
-	return str[0] == '$' && strchr("axtd", str[1])
+	return str[0] == '$' &&
+	       (str[1] == 'a' || str[1] == 'd' || str[1] == 't' || str[1] == 'x')
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
Signature · 1 line
2.35.1
author maintainer
#33 lore raw

PATCH 31/38 x86/cpu: Elide KCSAN for cpu_has() and friends

In reply to Sasha Levin

From: Peter Zijlstra <[email protected]>

[ Upstream commit a6a5eb269f6f3a2fe392f725a8d9052190c731e2 ]

As x86 uses the <asm-generic/bitops/instrumented-*.h> headers, the regular forms of all bitops are instrumented with explicit calls to KASAN and KCSAN checks. As these are explicit calls, these are not suppressed by the noinstr function attribute.

This can result in calls to those check functions in noinstr code, which objtool warns about:

vmlinux.o: warning: objtool: enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x28: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x24: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section

Prevent this by using the arch_*() bitops, which are the underlying bitops without explciit instrumentation.

---
 arch/x86/include/asm/cpufeature.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/include/asm/cpufeature.h +1 -1
index 59bf91c57aa8..619c1f80a2ab 100644
@@ -49,7 +49,7 @@ extern const char * const x86_power_flags[32];
 extern const char * const x86_bug_flags[NBUGINTS*32];
 
 #define test_cpu_cap(c, bit)						\
-	 test_bit(bit, (unsigned long *)((c)->x86_capability))
+	 arch_test_bit(bit, (unsigned long *)((c)->x86_capability))
 
 /*
  * There are 32 bits/features in each mask word.  The high bits
Signature · 1 line
2.35.1
author maintainer
#34 lore raw

PATCH 32/38 jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

In reply to Sasha Levin

From: Peter Zijlstra <[email protected]>

[ Upstream commit 656d054e0a15ec327bd82801ccd58201e59f6896 ]

When building x86_64 with JUMP_LABEL=n it's possible for instrumentation to sneak into noinstr:

vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section

Switch to arch_ prefixed atomic to avoid the explicit instrumentation.

---
 include/linux/jump_label.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/jump_label.h +2 -2
index 32809624d422..e67ee4d7318f 100644
@@ -249,9 +249,9 @@ extern void static_key_disable_cpuslocked(struct static_key *key);
 #include <linux/atomic.h>
 #include <linux/bug.h>
 
-static inline int static_key_count(struct static_key *key)
+static __always_inline int static_key_count(struct static_key *key)
 {
-	return atomic_read(&key->enabled);
+	return arch_atomic_read(&key->enabled);
 }
 
 static __always_inline void jump_label_init(void)
Signature · 1 line
2.35.1
author maintainer
#38 lore raw

PATCH 36/38 s390/gmap: voluntarily schedule during key setting

In reply to Sasha Levin

From: Christian Borntraeger <[email protected]>

[ Upstream commit 6d5946274df1fff539a7eece458a43be733d1db8 ]

With large and many guest with storage keys it is possible to create large latencies or stalls during initial key setting:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu:   18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998
       (t=2100 jiffies g=155867385 q=20879)
Task dump for CPU 18:
CPU 1/KVM       R  running task        0 1030947 256019 0x06000004
Call Trace:

sched_show_task
rcu_dump_cpu_stacks
rcu_sched_clock_irq
update_process_times
tick_sched_handle
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
do_IRQ
ext_int_handler
ptep_zap_key

The mmap lock is held during the page walking but since this is a semaphore scheduling is still possible. Same for the kvm srcu. To minimize overhead do this on every segment table entry or large page.

---
 arch/s390/mm/gmap.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/s390/mm/gmap.c +14 -0
index f2d19d40272c..2db097c14cec 100644
@@ -2596,6 +2596,18 @@ static int __s390_enable_skey_pte(pte_t *pte, unsigned long addr,
 	return 0;
 }
 
+/*
+ * Give a chance to schedule after setting a key to 256 pages.
+ * We only hold the mm lock, which is a rwsem and the kvm srcu.
+ * Both can sleep.
+ */
+static int __s390_enable_skey_pmd(pmd_t *pmd, unsigned long addr,
+				  unsigned long next, struct mm_walk *walk)
+{
+	cond_resched();
+	return 0;
+}
+
 static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
 				      unsigned long hmask, unsigned long next,
 				      struct mm_walk *walk)
@@ -2618,12 +2630,14 @@ static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr,
 	end = start + HPAGE_SIZE - 1;
 	__storage_key_init_range(start, end);
 	set_bit(PG_arch_1, &page->flags);
+	cond_resched();
 	return 0;
 }
 
 static const struct mm_walk_ops enable_skey_walk_ops = {
 	.hugetlb_entry		= __s390_enable_skey_hugetlb,
 	.pte_entry		= __s390_enable_skey_pte,
+	.pmd_entry		= __s390_enable_skey_pmd,
 };
 
 int s390_enable_skey(void)
Signature · 1 line
2.35.1
author maintainer
#36 lore raw

PATCH 34/38 nbd: fix race between nbd_alloc_config() and module removal

In reply to Sasha Levin

From: Yu Kuai <[email protected]>

[ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ]

When nbd module is being removing, nbd_alloc_config() may be called concurrently by nbd_genl_connect(), although try_module_get() will return false, but nbd_alloc_config() doesn't handle it.

The race may lead to the leak of nbd_config and its related resources (e.g, recv_workq) and oops in nbd_read_stat() due to the unload of nbd module as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  Oops: 0000 [#1] SMP PTI
  CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: knbd16-recv recv_work [nbd]
  RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
  Call Trace:
   recv_work+0x3b/0xb0 [nbd]
   process_one_work+0x1ed/0x390
   worker_thread+0x4a/0x3d0
   kthread+0x12a/0x150
   ret_from_fork+0x22/0x30

Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV), assign nbd->config only when nbd_alloc_config() succeeds to ensure the value of nbd->config is binary (valid or NULL).

Also adding a debug message to check the reference counter of nbd_config during module removal.

---
 drivers/block/nbd.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)
drivers/block/nbd.c +19 -9
index e922e239cd35..29f9f1bcf1cb 100644
@@ -1468,15 +1468,20 @@ static struct nbd_config *nbd_alloc_config(void)
 {
 	struct nbd_config *config;
 
+	if (!try_module_get(THIS_MODULE))
+		return ERR_PTR(-ENODEV);
+
 	config = kzalloc(sizeof(struct nbd_config), GFP_NOFS);
-	if (!config)
-		return NULL;
+	if (!config) {
+		module_put(THIS_MODULE);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	atomic_set(&config->recv_threads, 0);
 	init_waitqueue_head(&config->recv_wq);
 	init_waitqueue_head(&config->conn_wait);
 	config->blksize = NBD_DEF_BLKSIZE;
 	atomic_set(&config->live_connections, 0);
-	try_module_get(THIS_MODULE);
 	return config;
 }
 
@@ -1503,12 +1508,13 @@ static int nbd_open(struct block_device *bdev, fmode_t mode)
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
-		config = nbd->config = nbd_alloc_config();
-		if (!config) {
-			ret = -ENOMEM;
+		config = nbd_alloc_config();
+		if (IS_ERR(config)) {
+			ret = PTR_ERR(config);
 			mutex_unlock(&nbd->config_lock);
 			goto out;
 		}
+		nbd->config = config;
 		refcount_set(&nbd->config_refs, 1);
 		refcount_inc(&nbd->refs);
 		mutex_unlock(&nbd->config_lock);
@@ -1930,13 +1936,14 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
 		nbd_put(nbd);
 		return -EINVAL;
 	}
-	config = nbd->config = nbd_alloc_config();
-	if (!nbd->config) {
+	config = nbd_alloc_config();
+	if (IS_ERR(config)) {
 		mutex_unlock(&nbd->config_lock);
 		nbd_put(nbd);
 		printk(KERN_ERR "nbd: couldn't allocate config\n");
-		return -ENOMEM;
+		return PTR_ERR(config);
 	}
+	nbd->config = config;
 	refcount_set(&nbd->config_refs, 1);
 	set_bit(NBD_RT_BOUND, &config->runtime_flags);
 
@@ -2471,6 +2478,9 @@ static void __exit nbd_cleanup(void)
 	while (!list_empty(&del_list)) {
 		nbd = list_first_entry(&del_list, struct nbd_device, list);
 		list_del_init(&nbd->list);
+		if (refcount_read(&nbd->config_refs))
+			printk(KERN_ERR "nbd: possibly leaking nbd_config (ref %d)\n",
+					refcount_read(&nbd->config_refs));
 		if (refcount_read(&nbd->refs) != 1)
 			printk(KERN_ERR "nbd: possibly leaking a device\n");
 		nbd_put(nbd);
Signature · 1 line
2.35.1
author maintainer
#37 lore raw

PATCH 35/38 nbd: fix io hung while disconnecting device

In reply to Sasha Levin

From: Yu Kuai <[email protected]>

[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]

In our tests, "qemu-nbd" triggers a io hung:

INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
      Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd        state:D stack:    0 pid:11445 ppid:     1 flags:0x00000000
Call Trace:
 <TASK>
 __schedule+0x480/0x1050
 ? _raw_spin_lock_irqsave+0x3e/0xb0
 schedule+0x9c/0x1b0
 blk_mq_freeze_queue_wait+0x9d/0xf0
 ? ipi_rseq+0x70/0x70
 blk_mq_freeze_queue+0x2b/0x40
 nbd_add_socket+0x6b/0x270 [nbd]
 nbd_ioctl+0x383/0x510 [nbd]
 blkdev_ioctl+0x18e/0x3e0
 __x64_sys_ioctl+0xac/0x120
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0

"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following message was found:

block nbd0: Send disconnect failed -32

Which indicate that something is wrong with the server. Then, "qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear requests after commit 2516ab1543fd("nbd: only clear the queue on device teardown"). And in the meantime, request can't complete through timeout because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which means such request will never be completed in this situation.

Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't complete multiple times, switch back to call nbd_clear_sock() in nbd_clear_sock_ioctl(), so that inflight requests can be cleared.

---
 drivers/block/nbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/block/nbd.c +1 -1
index 29f9f1bcf1cb..edd49f1b4499 100644
@@ -1355,7 +1355,7 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
 static void nbd_clear_sock_ioctl(struct nbd_device *nbd,
 				 struct block_device *bdev)
 {
-	sock_shutdown(nbd);
+	nbd_clear_sock(nbd);
 	__invalidate_device(bdev, true);
 	nbd_bdev_reset(bdev);
 	if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF,
Signature · 1 line
2.35.1
author maintainer
#28 lore raw

PATCH 26/38 scsi: myrb: Fix up null pointer access on myrb_cleanup()

In reply to Sasha Levin

From: Hannes Reinecke <[email protected]>

[ Upstream commit f9f0a46141e2e39bedb4779c88380d1b5f018c14 ]

When myrb_probe() fails the callback might not be set, so we need to validate the 'disable_intr' callback in myrb_cleanup() to not cause a null pointer exception. And while at it do not call myrb_cleanup() if we cannot enable the PCI device at all.

---
 drivers/scsi/myrb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/scsi/myrb.c +8 -3
index 5fa0f4ed6565..ad17c2beaaca 100644
@@ -1241,7 +1241,8 @@ static void myrb_cleanup(struct myrb_hba *cb)
 	myrb_unmap(cb);
 
 	if (cb->mmio_base) {
-		cb->disable_intr(cb->io_base);
+		if (cb->disable_intr)
+			cb->disable_intr(cb->io_base);
 		iounmap(cb->mmio_base);
 	}
 	if (cb->irq)
@@ -3515,9 +3516,13 @@ static struct myrb_hba *myrb_detect(struct pci_dev *pdev,
 	mutex_init(&cb->dcmd_mutex);
 	mutex_init(&cb->dma_mutex);
 	cb->pdev = pdev;
+	cb->host = shost;
 
-	if (pci_enable_device(pdev))
-		goto failure;
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		scsi_host_put(shost);
+		return NULL;
+	}
 
 	if (privdata->hw_init == DAC960_PD_hw_init ||
 	    privdata->hw_init == DAC960_P_hw_init) {
Signature · 1 line
2.35.1
author maintainer
#29 lore raw

PATCH 27/38 Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"

In reply to Sasha Levin

From: Michal Kubecek <[email protected]>

[ Upstream commit 9c90c9b3e50e16d03c7f87d63e9db373974781e0 ]

This reverts commit 4dc2a5a8f6754492180741facf2a8787f2c415d7.

A non-zero return value from pfkey_broadcast() does not necessarily mean an error occurred as this function returns -ESRCH when no registered listener received the message. In particular, a call with BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return zero so that this commit in fact prevents processing any PF_KEY message. One visible effect is that racoon daemon fails to find encryption algorithms like aes and refuses to start.

Excluding -ESRCH return value would fix this but it's not obvious that we really want to bail out here and most other callers of pfkey_broadcast() also ignore the return value. Also, as pointed out by Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code should use netlink instead so that we should only disturb the code for really important fixes.

v2: add a comment explaining why is the return value ignored

---
 net/key/af_key.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
net/key/af_key.c +6 -4
index 6b7ed5568c09..2aa16a171285 100644
@@ -2830,10 +2830,12 @@ static int pfkey_process(struct sock *sk, struct sk_buff *skb, const struct sadb
 	void *ext_hdrs[SADB_EXT_MAX];
 	int err;
 
-	err = pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
-			      BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
-	if (err)
-		return err;
+	/* Non-zero return value of pfkey_broadcast() does not always signal
+	 * an error and even on an actual error we may still want to process
+	 * the message so rather ignore the return value.
+	 */
+	pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
+			BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
 
 	memset(ext_hdrs, 0, sizeof(ext_hdrs));
 	err = parse_exthdrs(skb, hdr, ext_hdrs);
Signature · 1 line
2.35.1
author maintainer
#19 lore raw

PATCH 20/38 serial: msm_serial: disable interrupts in __msm_console_write()

In reply to Sasha Levin

From: John Ogness <[email protected]>

[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve the assumed context.

---
 drivers/tty/serial/msm_serial.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/tty/serial/msm_serial.c +5 -0
index 26bcbec5422e..27023a56f3ac 100644
@@ -1593,6 +1593,7 @@ static inline struct uart_port *msm_get_port_from_line(unsigned int line)
 static void __msm_console_write(struct uart_port *port, const char *s,
 				unsigned int count, bool is_uartdm)
 {
+	unsigned long flags;
 	int i;
 	int num_newlines = 0;
 	bool replaced = false;
@@ -1610,6 +1611,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 			num_newlines++;
 	count += num_newlines;
 
+	local_irq_save(flags);
+
 	if (port->sysrq)
 		locked = 0;
 	else if (oops_in_progress)
@@ -1655,6 +1658,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 
 	if (locked)
 		spin_unlock(&port->lock);
+
+	local_irq_restore(flags);
 }
 
 static void msm_console_write(struct console *co, const char *s,
Signature · 1 line
2.35.1
author maintainer
#35 lore raw

PATCH 33/38 nbd: call genl_unregister_family() first in nbd_cleanup()

In reply to Sasha Levin

From: Yu Kuai <[email protected]>

[ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ]

Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000098
  Oops: 0002 [#1] SMP PTI
  CPU: 1 PID: 31299 Comm: nbd-client Tainted: G            E     5.14.0-rc4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:down_write+0x1a/0x50
  Call Trace:
   start_creating+0x89/0x130
   debugfs_create_dir+0x1b/0x130
   nbd_start_device+0x13d/0x390 [nbd]
   nbd_genl_connect+0x42f/0x748 [nbd]
   genl_family_rcv_msg_doit.isra.0+0xec/0x150
   genl_rcv_msg+0xe5/0x1e0
   netlink_rcv_skb+0x55/0x100
   genl_rcv+0x29/0x40
   netlink_unicast+0x1a8/0x250
   netlink_sendmsg+0x21b/0x430
   ____sys_sendmsg+0x2a4/0x2d0
   ___sys_sendmsg+0x81/0xc0
   __sys_sendmsg+0x62/0xb0
   __x64_sys_sendmsg+0x1f/0x30
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: nbd(E-)
---
 drivers/block/nbd.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/block/nbd.c +6 -1
index 59c452fff835..e922e239cd35 100644
@@ -2456,6 +2456,12 @@ static void __exit nbd_cleanup(void)
 	struct nbd_device *nbd;
 	LIST_HEAD(del_list);
 
+	/*
+	 * Unregister netlink interface prior to waiting
+	 * for the completion of netlink commands.
+	 */
+	genl_unregister_family(&nbd_genl_family);
+
 	nbd_dbg_close();
 
 	mutex_lock(&nbd_index_mutex);
@@ -2471,7 +2477,6 @@ static void __exit nbd_cleanup(void)
 	}
 
 	idr_destroy(&nbd_index_idr);
-	genl_unregister_family(&nbd_genl_family);
 	unregister_blkdev(NBD_MAJOR, "nbd");
 }
 
Signature · 1 line
2.35.1
author maintainer
#39 lore raw

PATCH 37/38 cifs: version operations for smb20 unneeded when legacy support disabled

In reply to Sasha Levin

From: Steve French <[email protected]>

[ Upstream commit 7ef93ffccd55fb0ba000ed16ef6a81cd7dee07b5 ]

We should not be including unused smb20 specific code when legacy support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned off). For example smb2_operations and smb2_values aren't used in that case. Over time we can move more and more SMB1/CIFS and SMB2.0 code into the insecure legacy ifdefs

---
 fs/cifs/cifsglob.h | 4 +++-
 fs/cifs/smb2ops.c  | 7 ++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)
fs/cifs/cifsglob.h +3 -1
index 6599069be690..196285b0fe46 100644
@@ -1982,11 +1982,13 @@ extern mempool_t *cifs_mid_poolp;
 
 /* Operations for different SMB versions */
 #define SMB1_VERSION_STRING	"1.0"
+#define SMB20_VERSION_STRING    "2.0"
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 extern struct smb_version_operations smb1_operations;
 extern struct smb_version_values smb1_values;
-#define SMB20_VERSION_STRING	"2.0"
 extern struct smb_version_operations smb20_operations;
 extern struct smb_version_values smb20_values;
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 #define SMB21_VERSION_STRING	"2.1"
 extern struct smb_version_operations smb21_operations;
 extern struct smb_version_values smb21_values;
fs/cifs/smb2ops.c +6 -1
index c758ff41b638..ece8969de850 100644
@@ -4032,11 +4032,13 @@ smb3_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,
 	}
 }
 
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 static bool
 smb2_is_read_op(__u32 oplock)
 {
 	return oplock == SMB2_OPLOCK_LEVEL_II;
 }
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 
 static bool
 smb21_is_read_op(__u32 oplock)
@@ -5122,7 +5124,7 @@ smb2_make_node(unsigned int xid, struct inode *inode,
 	return rc;
 }
 
-
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 struct smb_version_operations smb20_operations = {
 	.compare_fids = smb2_compare_fids,
 	.setup_request = smb2_setup_request,
@@ -5220,6 +5222,7 @@ struct smb_version_operations smb20_operations = {
 	.llseek = smb3_llseek,
 	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 
 struct smb_version_operations smb21_operations = {
 	.compare_fids = smb2_compare_fids,
@@ -5548,6 +5551,7 @@ struct smb_version_operations smb311_operations = {
 	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
 
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 struct smb_version_values smb20_values = {
 	.version_string = SMB20_VERSION_STRING,
 	.protocol_id = SMB20_PROT_ID,
@@ -5568,6 +5572,7 @@ struct smb_version_values smb20_values = {
 	.signing_required = SMB2_NEGOTIATE_SIGNING_REQUIRED,
 	.create_lease_size = sizeof(struct create_lease),
 };
+#endif /* ALLOW_INSECURE_LEGACY */
 
 struct smb_version_values smb21_values = {
 	.version_string = SMB21_VERSION_STRING,
Signature · 1 line
2.35.1
author maintainer
#27 lore raw

PATCH 25/38 md: protect md_unregister_thread from reentrancy

In reply to Sasha Levin

From: Guoqing Jiang <[email protected]>

[ Upstream commit 1e267742283a4b5a8ca65755c44166be27e9aa0f ]

Generally, the md_unregister_thread is called with reconfig_mutex, but raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread, so md_unregister_thread can be called simulitaneously from two call sites in theory.

Then after previous commit which remove the protection of reconfig_mutex for md_unregister_thread completely, the potential issue could be worse than before.

Let's take pers_lock at the beginning of function to ensure reentrancy.

---
 drivers/md/md.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/md/md.c +10 -5
index e4e855976dca..f8f24e9de69a 100644
@@ -7968,17 +7968,22 @@ EXPORT_SYMBOL(md_register_thread);
 
 void md_unregister_thread(struct md_thread **threadp)
 {
-	struct md_thread *thread = *threadp;
-	if (!thread)
-		return;
-	pr_debug("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
-	/* Locking ensures that mddev_unlock does not wake_up a
+	struct md_thread *thread;
+
+	/*
+	 * Locking ensures that mddev_unlock does not wake_up a
 	 * non-existent thread
 	 */
 	spin_lock(&pers_lock);
+	thread = *threadp;
+	if (!thread) {
+		spin_unlock(&pers_lock);
+		return;
+	}
 	*threadp = NULL;
 	spin_unlock(&pers_lock);
 
+	pr_debug("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk));
 	kthread_stop(thread->tsk);
 	kfree(thread);
 }
Signature · 1 line
2.35.1
author maintainer
#30 lore raw

PATCH 28/38 ceph: allow ceph.dir.rctime xattr to be updatable

In reply to Sasha Levin

From: Venky Shankar <[email protected]>

[ Upstream commit d7a2dc523085f8b8c60548ceedc696934aefeb0e ]

`rctime' has been a pain point in cephfs due to its buggy nature - inconsistent values reported and those sorts. Fixing rctime is non-trivial needing an overall redesign of the entire nested statistics infrastructure.

As a workaround, PR

     http://github.com/ceph/ceph/pull/37938

allows this extended attribute to be manually set. This allows users to "fixup" inconsistent rctime values. While this sounds messy, its probably the wisest approach allowing users/scripts to workaround buggy rctime values.

The above PR enables Ceph MDS to allow manually setting rctime extended attribute with the corresponding user-land changes. We may as well allow the same to be done via kclient for parity.

---
 fs/ceph/xattr.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
fs/ceph/xattr.c +9 -1
index 197cb1234341..76322c0f6e5f 100644
@@ -317,6 +317,14 @@ static ssize_t ceph_vxattrcb_snap_btime(struct ceph_inode_info *ci, char *val,
 	}
 #define XATTR_RSTAT_FIELD(_type, _name)			\
 	XATTR_NAME_CEPH(_type, _name, VXATTR_FLAG_RSTAT)
+#define XATTR_RSTAT_FIELD_UPDATABLE(_type, _name)			\
+	{								\
+		.name = CEPH_XATTR_NAME(_type, _name),			\
+		.name_size = sizeof (CEPH_XATTR_NAME(_type, _name)),	\
+		.getxattr_cb = ceph_vxattrcb_ ## _type ## _ ## _name,	\
+		.exists_cb = NULL,					\
+		.flags = VXATTR_FLAG_RSTAT,				\
+	}
 #define XATTR_LAYOUT_FIELD(_type, _name, _field)			\
 	{								\
 		.name = CEPH_XATTR_NAME2(_type, _name, _field),	\
@@ -354,7 +362,7 @@ static struct ceph_vxattr ceph_dir_vxattrs[] = {
 	XATTR_RSTAT_FIELD(dir, rfiles),
 	XATTR_RSTAT_FIELD(dir, rsubdirs),
 	XATTR_RSTAT_FIELD(dir, rbytes),
-	XATTR_RSTAT_FIELD(dir, rctime),
+	XATTR_RSTAT_FIELD_UPDATABLE(dir, rctime),
 	{
 		.name = "ceph.dir.pin",
 		.name_size = sizeof("ceph.dir.pin"),
Signature · 1 line
2.35.1
author maintainer
#40 lore raw

PATCH 38/38 nodemask: Fix return values to be unsigned

In reply to Sasha Levin

From: Kees Cook <[email protected]>

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ]

The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences:

mm/swapfile.c: In function ‘setup_swap_info’:
mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds]

  2291 |                                 p->avail_lists[i].prio = 1;
       |                                 ~~~~~~~~~~~~~~^~~
 In file included from mm/swapfile.c:16:
 ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’
   292 |         struct plist_node avail_lists[]; /*
       |                           ^~~~~~~~~~~
---
 include/linux/nodemask.h | 38 +++++++++++++++++++-------------------
 lib/nodemask.c           |  4 ++--
 2 files changed, 21 insertions(+), 21 deletions(-)
include/linux/nodemask.h +19 -19
index ac398e143c9a..82c86b0b09d9 100644
@@ -42,11 +42,11 @@
  * void nodes_shift_right(dst, src, n)	Shift right
  * void nodes_shift_left(dst, src, n)	Shift left
  *
- * int first_node(mask)			Number lowest set bit, or MAX_NUMNODES
- * int next_node(node, mask)		Next node past 'node', or MAX_NUMNODES
- * int next_node_in(node, mask)		Next node past 'node', or wrap to first,
+ * unsigned int first_node(mask)	Number lowest set bit, or MAX_NUMNODES
+ * unsigend int next_node(node, mask)	Next node past 'node', or MAX_NUMNODES
+ * unsigned int next_node_in(node, mask) Next node past 'node', or wrap to first,
  *					or MAX_NUMNODES
- * int first_unset_node(mask)		First node not set in mask, or 
+ * unsigned int first_unset_node(mask)	First node not set in mask, or
  *					MAX_NUMNODES
  *
  * nodemask_t nodemask_of_node(node)	Return nodemask with bit 'node' set
@@ -153,7 +153,7 @@ static inline void __nodes_clear(nodemask_t *dstp, unsigned int nbits)
 
 #define node_test_and_set(node, nodemask) \
 			__node_test_and_set((node), &(nodemask))
-static inline int __node_test_and_set(int node, nodemask_t *addr)
+static inline bool __node_test_and_set(int node, nodemask_t *addr)
 {
 	return test_and_set_bit(node, addr->bits);
 }
@@ -200,7 +200,7 @@ static inline void __nodes_complement(nodemask_t *dstp,
 
 #define nodes_equal(src1, src2) \
 			__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_equal(const nodemask_t *src1p,
+static inline bool __nodes_equal(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_equal(src1p->bits, src2p->bits, nbits);
@@ -208,7 +208,7 @@ static inline int __nodes_equal(const nodemask_t *src1p,
 
 #define nodes_intersects(src1, src2) \
 			__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_intersects(const nodemask_t *src1p,
+static inline bool __nodes_intersects(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
@@ -216,20 +216,20 @@ static inline int __nodes_intersects(const nodemask_t *src1p,
 
 #define nodes_subset(src1, src2) \
 			__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_subset(const nodemask_t *src1p,
+static inline bool __nodes_subset(const nodemask_t *src1p,
 					const nodemask_t *src2p, unsigned int nbits)
 {
 	return bitmap_subset(src1p->bits, src2p->bits, nbits);
 }
 
 #define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
-static inline int __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
 {
 	return bitmap_empty(srcp->bits, nbits);
 }
 
 #define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
-static inline int __nodes_full(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_full(const nodemask_t *srcp, unsigned int nbits)
 {
 	return bitmap_full(srcp->bits, nbits);
 }
@@ -260,15 +260,15 @@ static inline void __nodes_shift_left(nodemask_t *dstp,
           > MAX_NUMNODES, then the silly min_ts could be dropped. */
 
 #define first_node(src) __first_node(&(src))
-static inline int __first_node(const nodemask_t *srcp)
+static inline unsigned int __first_node(const nodemask_t *srcp)
 {
-	return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
+	return min_t(unsigned int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
 }
 
 #define next_node(n, src) __next_node((n), &(src))
-static inline int __next_node(int n, const nodemask_t *srcp)
+static inline unsigned int __next_node(int n, const nodemask_t *srcp)
 {
-	return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
+	return min_t(unsigned int, MAX_NUMNODES, find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
 }
 
 /*
@@ -276,7 +276,7 @@ static inline int __next_node(int n, const nodemask_t *srcp)
  * the first node in src if needed.  Returns MAX_NUMNODES if src is empty.
  */
 #define next_node_in(n, src) __next_node_in((n), &(src))
-int __next_node_in(int node, const nodemask_t *srcp);
+unsigned int __next_node_in(int node, const nodemask_t *srcp);
 
 static inline void init_nodemask_of_node(nodemask_t *mask, int node)
 {
@@ -296,9 +296,9 @@ static inline void init_nodemask_of_node(nodemask_t *mask, int node)
 })
 
 #define first_unset_node(mask) __first_unset_node(&(mask))
-static inline int __first_unset_node(const nodemask_t *maskp)
+static inline unsigned int __first_unset_node(const nodemask_t *maskp)
 {
-	return min_t(int,MAX_NUMNODES,
+	return min_t(unsigned int, MAX_NUMNODES,
 			find_first_zero_bit(maskp->bits, MAX_NUMNODES));
 }
 
@@ -436,11 +436,11 @@ static inline int num_node_state(enum node_states state)
 
 #define first_online_node	first_node(node_states[N_ONLINE])
 #define first_memory_node	first_node(node_states[N_MEMORY])
-static inline int next_online_node(int nid)
+static inline unsigned int next_online_node(int nid)
 {
 	return next_node(nid, node_states[N_ONLINE]);
 }
-static inline int next_memory_node(int nid)
+static inline unsigned int next_memory_node(int nid)
 {
 	return next_node(nid, node_states[N_MEMORY]);
 }
lib/nodemask.c +2 -2
index 3aa454c54c0d..e22647f5181b 100644
@@ -3,9 +3,9 @@
 #include <linux/module.h>
 #include <linux/random.h>
 
-int __next_node_in(int node, const nodemask_t *srcp)
+unsigned int __next_node_in(int node, const nodemask_t *srcp)
 {
-	int ret = __next_node(node, srcp);
+	unsigned int ret = __next_node(node, srcp);
 
 	if (ret == MAX_NUMNODES)
 		ret = __first_node(srcp);
Signature · 1 line
2.35.1
author maintainer
#15 lore raw

PATCH 16/38 extcon: Modify extcon device to be created after driver data is set

In reply to Sasha Levin

From: bumwoo lee <[email protected]>

[ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ]

Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data.

- Oops's backtrace.

Backtrace:

[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read) [<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read) [<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read) [<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read) [<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read) [<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read) [<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)

---
 drivers/extcon/extcon.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
drivers/extcon/extcon.c +17 -12
index e7a9561a826d..356610404bb4 100644
@@ -1230,19 +1230,14 @@ int extcon_dev_register(struct extcon_dev *edev)
 		edev->dev.type = &edev->extcon_dev_type;
 	}
 
-	ret = device_register(&edev->dev);
-	if (ret) {
-		put_device(&edev->dev);
-		goto err_dev;
-	}
-
 	spin_lock_init(&edev->lock);
-	edev->nh = devm_kcalloc(&edev->dev, edev->max_supported,
-				sizeof(*edev->nh), GFP_KERNEL);
-	if (!edev->nh) {
-		ret = -ENOMEM;
-		device_unregister(&edev->dev);
-		goto err_dev;
+	if (edev->max_supported) {
+		edev->nh = kcalloc(edev->max_supported, sizeof(*edev->nh),
+				GFP_KERNEL);
+		if (!edev->nh) {
+			ret = -ENOMEM;
+			goto err_alloc_nh;
+		}
 	}
 
 	for (index = 0; index < edev->max_supported; index++)
@@ -1253,6 +1248,12 @@ int extcon_dev_register(struct extcon_dev *edev)
 	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
 
+	ret = device_register(&edev->dev);
+	if (ret) {
+		put_device(&edev->dev);
+		goto err_dev;
+	}
+
 	mutex_lock(&extcon_dev_list_lock);
 	list_add(&edev->entry, &extcon_dev_list);
 	mutex_unlock(&extcon_dev_list_lock);
@@ -1260,6 +1261,9 @@ int extcon_dev_register(struct extcon_dev *edev)
 	return 0;
 
 err_dev:
+	if (edev->max_supported)
+		kfree(edev->nh);
+err_alloc_nh:
 	if (edev->max_supported)
 		kfree(edev->extcon_dev_type.groups);
 err_alloc_groups:
@@ -1320,6 +1324,7 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 	if (edev->max_supported) {
 		kfree(edev->extcon_dev_type.groups);
 		kfree(edev->cables);
+		kfree(edev->nh);
 	}
 
 	put_device(&edev->dev);
Signature · 1 line
2.35.1
author maintainer
#16 lore raw

PATCH 17/38 clocksource/drivers/sp804: Avoid error on multiple instances

In reply to Sasha Levin

From: Andre Przywara <[email protected]>

[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring up the first one, since multiple timers of the same kind are not useful to Linux. As this is intentional behaviour, we should not return an error message, as we do today:
===============

[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22

===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is disabled (as this is now handled by OF_DECLARE), so remove the explicit check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

---
 drivers/clocksource/timer-sp804.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clocksource/timer-sp804.c +5 -5
index 6e8ad4a4ea3c..bedd3570474b 100644
@@ -274,6 +274,11 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
 	struct clk *clk1, *clk2;
 	const char *name = of_get_property(np, "compatible", NULL);
 
+	if (initialized) {
+		pr_debug("%pOF: skipping further SP804 timer device\n", np);
+		return 0;
+	}
+
 	base = of_iomap(np, 0);
 	if (!base)
 		return -ENXIO;
@@ -285,11 +290,6 @@ static int __init sp804_of_init(struct device_node *np, struct sp804_timer *time
 	writel(0, timer1_base + timer->ctrl);
 	writel(0, timer2_base + timer->ctrl);
 
-	if (initialized || !of_device_is_available(np)) {
-		ret = -EINVAL;
-		goto err;
-	}
-
 	clk1 = of_clk_get(np, 0);
 	if (IS_ERR(clk1))
 		clk1 = NULL;
Signature · 1 line
2.35.1
#21 lore raw

Re: [PATCH AUTOSEL 5.10 21/38] accessiblity: speakup: Add missing misc_deregister in softsynth_probe

In reply to Sasha Levin

Hi!

Quoted 6 lines

From: Zheng Bin <[email protected]>

[ Upstream commit 106101303eda8f93c65158e5d72b2cc6088ed034 ]

softsynth_probe misses a call misc_deregister() in an error path, this patch fixes that.

This seems incorrect. Registration failed, we can't really deregister.

I checked random other caller of misc_register(), and it does not seem this API is unusual.

Best regards,
Pavel

Quoted 9 lines

+++ b/drivers/accessibility/speakup/speakup_soft.c

drivers/accessibility/speakup/speakup_soft.c +1 -0
@@ -390,6 +390,7 @@ static int softsynth_probe(struct spk_synth *synth)
 	synthu_device.name = "softsynthu";
 	synthu_device.fops = &softsynthu_fops;
 	if (misc_register(&synthu_device)) {
+		misc_deregister(&synth_device);
 		pr_warn("Couldn't initialize miscdevice /dev/softsynthu.\n");
 		return -ENODEV;
 	}
Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author maintainer
#22 lore raw

Re: [PATCH AUTOSEL 5.10 21/38] accessiblity: speakup: Add missing misc_deregister in softsynth_probe

Quoted 6 lines · Pavel Machek

Hi!

Quoted 4 lines

From: Zheng Bin <[email protected]>

[ Upstream commit 106101303eda8f93c65158e5d72b2cc6088ed034 ]

Quoted 7 lines
Quoted 2 lines

softsynth_probe misses a call misc_deregister() in an error path, this patch fixes that.

This seems incorrect. Registration failed, we can't really deregister.

I checked random other caller of misc_register(), and it does not seem this API is unusual.

Uh, yes, I'll drop it for now.

Signature · 2 lines
Thanks,
Sasha
#23 lore raw

Re: [PATCH AUTOSEL 5.10 21/38] accessiblity: speakup: Add missing misc_deregister in softsynth_probe

Sasha Levin, le dim. 12 juin 2022 13:47:35 -0400, a ecrit:

Quoted 9 lines · Pavel Machek
Quoted 8 lines
Quoted 6 lines

From: Zheng Bin <[email protected]>

[ Upstream commit 106101303eda8f93c65158e5d72b2cc6088ed034 ]

softsynth_probe misses a call misc_deregister() in an error path, this patch fixes that.

This seems incorrect. Registration failed, we can't really deregister.

The synthu_device registration failed, yes, but the patch is about unregistering synth_device, which was registered just above (notice synth_device != synthu_device)

Samuel