Skip to contentSkip to conversation

scsi: ufs: Fix PMC and low-power mode on MediaTek UFS platforms

PATCH Superseded Stanley Chu 1 participant 9 messages Jun 14, 2022

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover scsi: ufs: Fix PMC and low-power mode on MediaTek UFS platforms

Hi Martin,

This series provides some fixes on MediaTek UFS platforms, please consider this patch series for kernel v5.20.

- Provide workaround for power mode change for HS-G5
- Fix and provide VCCQx low-power support

Changes compared to v1:
- Add patches to fix and provide VCCQx low-power support

Alice Chao (1):
scsi: ufs-mediatek: Support flexible parameters for smc calls

CC Chou (1):
scsi: ufs-mediatek: Introduce workaround for power mode change

Peter Wang (1):
scsi: ufs-mediatek: Support low-power mode for VCCQ

Po-Wen Kao (2):
scsi: ufs-mediatek: Fix the timing of configuring device regulators
scsi: ufs-mediatek: Prevent device regulators setting as LPM
incorrectly

Stanley Chu (3):
scsi: ufs: Export ufshcd_uic_change_pwr_mode()
scsi: ufs: Fix ADAPT logic for HS-G5
scsi: ufs-mediatek: Support low-power mode for parents of VCCQx

 drivers/ufs/core/ufshcd.c       |   5 +-
 drivers/ufs/host/ufs-mediatek.c | 186 ++++++++++++++++++++++++++------
 drivers/ufs/host/ufs-mediatek.h |  61 +++++++++++
 include/ufs/ufshcd.h            |   1 +
 include/ufs/unipro.h            |   1 +
 5 files changed, 221 insertions(+), 33 deletions(-)
Signature · 1 line
2.18.0
#1 lore raw

PATCH v2 1/8 scsi: ufs: Export ufshcd_uic_change_pwr_mode()

Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for SoC-specific power mode change design limitation.

---
 drivers/ufs/core/ufshcd.c | 3 ++-
 include/ufs/ufshcd.h      | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +2 -1
index 936a6d5467c9..19e17c898319 100755
@@ -4091,7 +4091,7 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
  *
  * Returns 0 on success, non-zero value on failure
  */
-static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
 {
 	struct uic_command uic_cmd = {0};
 	int ret;
@@ -4116,6 +4116,7 @@ static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufshcd_uic_change_pwr_mode);
 
 int ufshcd_link_recovery(struct ufs_hba *hba)
 {
include/ufs/ufshcd.h +1 -0
index a92271421718..aa778418703f 100755
@@ -1087,6 +1087,7 @@ extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
 			       u32 *mib_val, u8 peer);
 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
 			struct ufs_pa_layer_attr *desired_pwr_mode);
+extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
 
 /* UIC command interfaces for DME primitives */
 #define DME_LOCAL	0
Signature · 1 line
2.18.0
#2 lore raw

PATCH v2 2/8 scsi: ufs: Fix ADAPT logic for HS-G5

In reply to Stanley Chu

ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix the logic for higher gears.

---
 drivers/ufs/core/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ufs/core/ufshcd.c +1 -1
index 19e17c898319..0d16739c67bb 100755
@@ -3802,7 +3802,7 @@ int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
 {
 	int ret;
 
-	if (agreed_gear != UFS_HS_G4)
+	if (agreed_gear < UFS_HS_G4)
 		adapt_val = PA_NO_ADAPT;
 
 	ret = ufshcd_dme_set(hba,
Signature · 1 line
2.18.0
#3 lore raw

PATCH v2 3/8 scsi: ufs-mediatek: Introduce workaround for power mode change

In reply to Stanley Chu

From: CC Chou <[email protected]>

Some MediaTek SoC chips need special flow for power mode change, especially for chips supporting HS-G5.

Enable the workaround by setting the host-specific capability.

---
 drivers/ufs/host/ufs-mediatek.c | 60 +++++++++++++++++++++++++++++++--
 drivers/ufs/host/ufs-mediatek.h |  1 +
 include/ufs/unipro.h            |  1 +
 3 files changed, 60 insertions(+), 2 deletions(-)
drivers/ufs/host/ufs-mediatek.c +58 -2
index beabc3ccd30b..21d591925dc4 100755
@@ -82,6 +82,13 @@ static bool ufs_mtk_is_broken_vcc(struct ufs_hba *hba)
 	return !!(host->caps & UFS_MTK_CAP_BROKEN_VCC);
 }
 
+static bool ufs_mtk_is_pmc_via_fastauto(struct ufs_hba *hba)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	return (host->caps & UFS_MTK_CAP_PMC_VIA_FASTAUTO);
+}
+
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -579,6 +586,9 @@ static void ufs_mtk_init_host_caps(struct ufs_hba *hba)
 	if (of_property_read_bool(np, "mediatek,ufs-broken-vcc"))
 		host->caps |= UFS_MTK_CAP_BROKEN_VCC;
 
+	if (of_property_read_bool(np, "mediatek,ufs-pmc-via-fastauto"))
+		host->caps |= UFS_MTK_CAP_PMC_VIA_FASTAUTO;
+
 	dev_info(hba->dev, "caps: 0x%x", host->caps);
 }
 
@@ -754,6 +764,26 @@ static int ufs_mtk_init(struct ufs_hba *hba)
 	return err;
 }
 
+static bool ufs_mtk_pmc_via_fastauto(struct ufs_hba *hba,
+	struct ufs_pa_layer_attr *dev_req_params)
+{
+	if (!ufs_mtk_is_pmc_via_fastauto(hba))
+		return false;
+
+	if (dev_req_params->hs_rate == hba->pwr_info.hs_rate)
+		return false;
+
+	if ((dev_req_params->pwr_tx != FAST_MODE) &&
+		(dev_req_params->gear_tx < UFS_HS_G4))
+		return false;
+
+	if ((dev_req_params->pwr_rx != FAST_MODE) &&
+		(dev_req_params->gear_rx < UFS_HS_G4))
+		return false;
+
+	return true;
+}
+
 static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 				  struct ufs_pa_layer_attr *dev_max_params,
 				  struct ufs_pa_layer_attr *dev_req_params)
@@ -763,8 +793,8 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 	int ret;
 
 	ufshcd_init_pwr_dev_param(&host_cap);
-	host_cap.hs_rx_gear = UFS_HS_G4;
-	host_cap.hs_tx_gear = UFS_HS_G4;
+	host_cap.hs_rx_gear = UFS_HS_G5;
+	host_cap.hs_tx_gear = UFS_HS_G5;
 
 	ret = ufshcd_get_pwr_dev_param(&host_cap,
 				       dev_max_params,
@@ -774,6 +804,32 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 			__func__);
 	}
 
+	if (ufs_mtk_pmc_via_fastauto(hba, dev_req_params)) {
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), true);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), UFS_HS_G1);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), true);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), UFS_HS_G1);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
+						dev_req_params->lane_tx);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES),
+						dev_req_params->lane_rx);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
+						dev_req_params->hs_rate);
+
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE),
+		     PA_NO_ADAPT);
+
+		ret = ufshcd_uic_change_pwr_mode(hba,
+			FASTAUTO_MODE << 4 | FASTAUTO_MODE);
+
+		if (ret) {
+			dev_err(hba->dev, "%s: HSG1B FASTAUTO failed ret=%d\n",
+				__func__, ret);
+		}
+	}
+
 	if (host->hw_ver.major >= 3) {
 		ret = ufshcd_dme_configure_adapt(hba,
 					   dev_req_params->gear_tx,
drivers/ufs/host/ufs-mediatek.h +1 -0
index 414dca86c09f..7e1913769671 100755
@@ -108,6 +108,7 @@ enum ufs_mtk_host_caps {
 	UFS_MTK_CAP_VA09_PWR_CTRL              = 1 << 1,
 	UFS_MTK_CAP_DISABLE_AH8                = 1 << 2,
 	UFS_MTK_CAP_BROKEN_VCC                 = 1 << 3,
+	UFS_MTK_CAP_PMC_VIA_FASTAUTO           = 1 << 6,
 };
 
 struct ufs_mtk_crypt_cfg {
include/ufs/unipro.h +1 -0
index 0521f887e3ac..4b13fbf8ee18 100755
@@ -229,6 +229,7 @@ enum ufs_hs_gear_tag {
 	UFS_HS_G2,		/* HS Gear 2 */
 	UFS_HS_G3,		/* HS Gear 3 */
 	UFS_HS_G4,		/* HS Gear 4 */
+	UFS_HS_G5		/* HS Gear 5 */
 };
 
 enum ufs_unipro_ver {
Signature · 1 line
2.18.0
#4 lore raw

PATCH v2 4/8 scsi: ufs-mediatek: Fix the timing of configuring device regulators

In reply to Stanley Chu

From: Po-Wen Kao <[email protected]>

Currently the LPM configurations of device regulators may not work since VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.

Fix it by changing the timing of invoking ufs_mtk_vreg_set_lpm().

---
 drivers/ufs/host/ufs-mediatek.c | 60 ++++++++++++++++++++++++++++++---
 1 file changed, 55 insertions(+), 5 deletions(-)
drivers/ufs/host/ufs-mediatek.c +55 -5
index 21d591925dc4..3b3fe5470b71 100755
@@ -1082,7 +1082,6 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 		 * ufshcd_suspend() re-enabling regulators while vreg is still
 		 * in low-power mode.
 		 */
-		ufs_mtk_vreg_set_lpm(hba, true);
 		err = ufs_mtk_mphy_power_on(hba, false);
 		if (err)
 			goto fail;
@@ -1106,12 +1105,13 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	int err;
 
+	if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
+		ufs_mtk_vreg_set_lpm(hba, false);
+
 	err = ufs_mtk_mphy_power_on(hba, true);
 	if (err)
 		goto fail;
 
-	ufs_mtk_vreg_set_lpm(hba, false);
-
 	if (ufshcd_is_link_hibern8(hba)) {
 		err = ufs_mtk_link_set_hpm(hba);
 		if (err)
@@ -1276,9 +1276,59 @@ static int ufs_mtk_remove(struct platform_device *pdev)
 	return 0;
 }
 
+int ufs_mtk_system_suspend(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ret = ufshcd_system_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}
+
+int ufs_mtk_system_resume(struct device *dev)
+{
+	int ret = 0;
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_system_resume(dev);
+
+	return ret;
+}
+
+int ufs_mtk_runtime_suspend(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = ufshcd_runtime_suspend(dev);
+
+	if (!ret)
+		ufs_mtk_vreg_set_lpm(hba, true);
+
+	return ret;
+}
+
+int ufs_mtk_runtime_resume(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ufs_mtk_vreg_set_lpm(hba, false);
+
+	ret = ufshcd_runtime_resume(dev);
+
+	return ret;
+}
+
 static const struct dev_pm_ops ufs_mtk_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
-	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend, ufs_mtk_system_resume)
+	SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend, ufs_mtk_runtime_resume, NULL)
 	.prepare	 = ufshcd_suspend_prepare,
 	.complete	 = ufshcd_resume_complete,
 };
Signature · 1 line
2.18.0
#5 lore raw

PATCH v2 5/8 scsi: ufs-mediatek: Prevent device regulators setting as LPM incorrectly

In reply to Stanley Chu

From: Po-Wen Kao <[email protected]>

Device regulatrs are allowed to enter low-power mode if neither device is not in active mode, nor VCC does not keep on.

Simply fix this by adding conditions before LPM decision.

---
 drivers/ufs/host/ufs-mediatek.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/ufs/host/ufs-mediatek.c +10 -2
index 3b3fe5470b71..c9afe373437c 100755
@@ -1034,10 +1034,18 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (!hba->vreg_info.vccq2 || !hba->vreg_info.vcc)
 		return;
 
-	if (lpm && !hba->vreg_info.vcc->enabled)
+	/* Bypass LPM when device is still active */
+	if (lpm && ufshcd_is_ufs_dev_active(hba))
+		return;
+
+	/* Bypass LPM if VCC is enabled */
+	if (lpm && hba->vreg_info.vcc->enabled)
+		return;
+
+	if (lpm)
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_IDLE);
-	else if (!lpm)
+	else
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_NORMAL);
 }
Signature · 1 line
2.18.0
#6 lore raw

PATCH v2 6/8 scsi: ufs-mediatek: Support low-power mode for VCCQ

In reply to Stanley Chu

From: Peter Wang <[email protected]>

Also allow VCCQ to enter low-power mode, and meanwhile remove the restriction of VCC because VCCQ/VCCQ2 can be changed to low-power mode even if VCC keeps on while the device is not in active power mode.

---
 drivers/ufs/host/ufs-mediatek.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/ufs/host/ufs-mediatek.c +13 -6
index c9afe373437c..178043ab837c 100755
@@ -1031,7 +1031,13 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 
 static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 {
-	if (!hba->vreg_info.vccq2 || !hba->vreg_info.vcc)
+	struct ufs_vreg *vccqx = NULL;
+
+	if (!hba->vreg_info.vccq && !hba->vreg_info.vccq2)
+		return;
+
+	/* Skip if VCC is assumed always-on */
+	if (!hba->vreg_info.vcc)
 		return;
 
 	/* Bypass LPM when device is still active */
@@ -1042,12 +1048,13 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (lpm && hba->vreg_info.vcc->enabled)
 		return;
 
-	if (lpm)
-		regulator_set_mode(hba->vreg_info.vccq2->reg,
-				   REGULATOR_MODE_IDLE);
+	if (hba->vreg_info.vccq)
+		vccqx = hba->vreg_info.vccq;
 	else
-		regulator_set_mode(hba->vreg_info.vccq2->reg,
-				   REGULATOR_MODE_NORMAL);
+		vccqx = hba->vreg_info.vccq2;
+
+	regulator_set_mode(vccqx->reg,
+		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
 }
 
 static void ufs_mtk_auto_hibern8_disable(struct ufs_hba *hba)
Signature · 1 line
2.18.0
#7 lore raw

PATCH v2 7/8 scsi: ufs-mediatek: Support flexible parameters for smc calls

In reply to Stanley Chu

From: Alice Chao <[email protected]>

Provide flexible number of parameters for UFS SMC calls to be easily used for future SMC usages.

This is a preparation patch for the next patch.

---
 drivers/ufs/host/ufs-mediatek.c | 16 ----------
 drivers/ufs/host/ufs-mediatek.h | 56 +++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 16 deletions(-)
drivers/ufs/host/ufs-mediatek.c +0 -16
index 178043ab837c..9337ce27329b 100755
@@ -30,22 +30,6 @@
 #define CREATE_TRACE_POINTS
 #include "ufs-mediatek-trace.h"
 
-#define ufs_mtk_smc(cmd, val, res) \
-	arm_smccc_smc(MTK_SIP_UFS_CONTROL, \
-		      cmd, val, 0, 0, 0, 0, 0, &(res))
-
-#define ufs_mtk_va09_pwr_ctrl(res, on) \
-	ufs_mtk_smc(UFS_MTK_SIP_VA09_PWR_CTRL, on, res)
-
-#define ufs_mtk_crypto_ctrl(res, enable) \
-	ufs_mtk_smc(UFS_MTK_SIP_CRYPTO_CTRL, enable, res)
-
-#define ufs_mtk_ref_clk_notify(on, res) \
-	ufs_mtk_smc(UFS_MTK_SIP_REF_CLK_NOTIFICATION, on, res)
-
-#define ufs_mtk_device_reset_ctrl(high, res) \
-	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
-
 static const struct ufs_dev_quirk ufs_mtk_dev_fixups[] = {
 	{ .wmanufacturerid = UFS_VENDOR_MICRON,
 	  .model = UFS_ANY_MODEL,
drivers/ufs/host/ufs-mediatek.h +56 -0

60 lines not on this page · raw message

Signature · 1 line
2.18.0
#8 lore raw

PATCH v2 8/8 scsi: ufs-mediatek: Support low-power mode for parents of VCCQx

In reply to Stanley Chu

Provide the facility to configure parents of VCCQx power rails as low-power or full-power mode in MediaTek UFS platforms.

---
 drivers/ufs/host/ufs-mediatek.c | 45 +++++++++++++++++++++++----------
 drivers/ufs/host/ufs-mediatek.h |  4 +++
 2 files changed, 36 insertions(+), 13 deletions(-)
drivers/ufs/host/ufs-mediatek.c +32 -13
index 9337ce27329b..2c1e55f8d7c6 100755
@@ -1013,10 +1013,29 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 	return 0;
 }
 
-static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
+static void ufs_mtk_vccqx_set_lpm(struct ufs_hba *hba, bool lpm)
 {
 	struct ufs_vreg *vccqx = NULL;
 
+	if (hba->vreg_info.vccq)
+		vccqx = hba->vreg_info.vccq;
+	else
+		vccqx = hba->vreg_info.vccq2;
+
+	regulator_set_mode(vccqx->reg,
+		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
+}
+
+static void ufs_mtk_vsx_set_lpm(struct ufs_hba *hba, bool lpm)
+{
+	struct arm_smccc_res res;
+
+	ufs_mtk_device_pwr_ctrl(!lpm,
+		(unsigned long)hba->dev_info.wspecversion, res);
+}
+
+static void ufs_mtk_dev_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
+{
 	if (!hba->vreg_info.vccq && !hba->vreg_info.vccq2)
 		return;
 
@@ -1032,13 +1051,13 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (lpm && hba->vreg_info.vcc->enabled)
 		return;
 
-	if (hba->vreg_info.vccq)
-		vccqx = hba->vreg_info.vccq;
-	else
-		vccqx = hba->vreg_info.vccq2;
-
-	regulator_set_mode(vccqx->reg,
-		lpm ? REGULATOR_MODE_IDLE : REGULATOR_MODE_NORMAL);
+	if (lpm) {
+		ufs_mtk_vccqx_set_lpm(hba, lpm);
+		ufs_mtk_vsx_set_lpm(hba, lpm);
+	} else {
+		ufs_mtk_vsx_set_lpm(hba, lpm);
+		ufs_mtk_vccqx_set_lpm(hba, lpm);
+	}
 }
 
 static void ufs_mtk_auto_hibern8_disable(struct ufs_hba *hba)
@@ -1105,7 +1124,7 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	int err;
 
 	if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL)
-		ufs_mtk_vreg_set_lpm(hba, false);
+		ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	err = ufs_mtk_mphy_power_on(hba, true);
 	if (err)
@@ -1283,7 +1302,7 @@ int ufs_mtk_system_suspend(struct device *dev)
 	ret = ufshcd_system_suspend(dev);
 
 	if (!ret)
-		ufs_mtk_vreg_set_lpm(hba, true);
+		ufs_mtk_dev_vreg_set_lpm(hba, true);
 
 	return ret;
 }
@@ -1293,7 +1312,7 @@ int ufs_mtk_system_resume(struct device *dev)
 	int ret = 0;
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 
-	ufs_mtk_vreg_set_lpm(hba, false);
+	ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	ret = ufshcd_system_resume(dev);
 
@@ -1308,7 +1327,7 @@ int ufs_mtk_runtime_suspend(struct device *dev)
 	ret = ufshcd_runtime_suspend(dev);
 
 	if (!ret)
-		ufs_mtk_vreg_set_lpm(hba, true);
+		ufs_mtk_dev_vreg_set_lpm(hba, true);
 
 	return ret;
 }
@@ -1318,7 +1337,7 @@ int ufs_mtk_runtime_resume(struct device *dev)
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 	int ret = 0;
 
-	ufs_mtk_vreg_set_lpm(hba, false);
+	ufs_mtk_dev_vreg_set_lpm(hba, false);
 
 	ret = ufshcd_runtime_resume(dev);
 
drivers/ufs/host/ufs-mediatek.h +4 -0
index 9117427ca6c4..eb26306a719f 100755
@@ -83,6 +83,7 @@ enum {
 #define UFS_MTK_SIP_DEVICE_RESET          BIT(1)
 #define UFS_MTK_SIP_CRYPTO_CTRL           BIT(2)
 #define UFS_MTK_SIP_REF_CLK_NOTIFICATION  BIT(3)
+#define UFS_MTK_SIP_DEVICE_PWR_CTRL       BIT(7)
 
 /*
  * VS_DEBUGCLOCKENABLE
@@ -199,4 +200,7 @@ struct ufs_mtk_host {
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, res, high)
 
+#define ufs_mtk_device_pwr_ctrl(on, ufs_ver, res) \
+	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_PWR_CTRL, res, on, ufs_ver)
+
 #endif /* !_UFS_MEDIATEK_H */
Signature · 1 line
2.18.0