Skip to contentSkip to conversation

spi: topcliff-pch: Use core message validation

PATCH In review Mark Brown 1 participant 2 messages Jun 15, 2022 – Jun 20, 2022 SPI

lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

PATCH 1/1 spi: topcliff-pch: Use core message validation

The topcliff-pch driver requires TX and RX buffers on all transfers, open coding checks for this. Remove those open coded checks and instead rely on the core functionality, which has the added bonus that it will fix up any transfers submitted by drivers as needed rather than erroring out.

---
 drivers/spi/spi-topcliff-pch.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)
drivers/spi/spi-topcliff-pch.c +1 -23
index dfaa1d79a78b..fe4bbd928c6c 100644
@@ -461,29 +461,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 	int retval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&data->lock, flags);
-	/* validate Tx/Rx buffers and Transfer length */
-	list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
-		if (!transfer->tx_buf && !transfer->rx_buf) {
-			dev_err(&pspi->dev,
-				"%s Tx and Rx buffer NULL\n", __func__);
-			retval = -EINVAL;
-			goto err_return_spinlock;
-		}
-
-		if (!transfer->len) {
-			dev_err(&pspi->dev, "%s Transfer length invalid\n",
-				__func__);
-			retval = -EINVAL;
-			goto err_return_spinlock;
-		}
-
-		dev_dbg(&pspi->dev,
-			"%s Tx/Rx buffer valid. Transfer length valid\n",
-			__func__);
-	}
-	spin_unlock_irqrestore(&data->lock, flags);
-
 	/* We won't process any messages if we have been asked to terminate */
 	if (data->status == STATUS_EXITING) {
 		dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
@@ -1365,6 +1342,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->max_speed_hz = PCH_MAX_BAUDRATE;
+	master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
 
 	data->board_dat = board_dat;
 	data->plat_dev = plat_dev;
Signature · 1 line
2.30.2
author maintainer
#1 lore raw
Quoted 6 lines · Mark Brown

The topcliff-pch driver requires TX and RX buffers on all transfers, open coding checks for this. Remove those open coded checks and instead rely on the core functionality, which has the added bonus that it will fix up any transfers submitted by drivers as needed rather than erroring out.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: topcliff-pch: Use core message validation

      commit: 26f30e3ee1bf120af1bde22d890e46a0c8dbeca0

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark