Skip to contentSkip to conversation

New: NVMe quirk needed for multiple Micron MTFDKBA2T0TFH SSDs]

[email protected]: Bjorn Helgaas 2 participants 2 messages Jun 19, 2022 – Jun 20, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Thanks very much for the testing and report, Leo! I'm forwarding it to the NVMe folks who would take care of this. I checked current upstream (v5.19-rc1), and indeed this quirk does not appear there.

----- Forwarded message from [email protected] -----

Date: Sun, 19 Jun 2022 08:58:10 +0000
From: [email protected]
To: [email protected]
Subject: [Bug 216147] New: NVMe quirk needed for multiple Micron MTFDKBA2T0TFH SSDs
Message-ID: <[email protected]/>

https://bugzilla.kernel.org/show_bug.cgi?id=216147

            Bug ID: 216147
           Summary: NVMe quirk needed for multiple Micron MTFDKBA2T0TFH
                    SSDs
           Product: Drivers
           Version: 2.5
    Kernel Version: 5.15.48
          Hardware: AMD
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: PCI
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

Created attachment 301221
--> https://bugzilla.kernel.org/attachment.cgi?id=301221&action=edit
Adding NVME_QUIRK_IGNORE_DEV_SUBNQN for Micron MTFDKBA2T0TFH

Even though first noticed on an Ubuntu kernel, I dare to report this against upstream as this hardware combination malfunction seems not to be known yet (I did not find distribution-specific patches for this issue). Therefore, IMHO, the fix should be included upstream to make these devices work on every kernel deployment.

My brand new Lenovo Notebook contains three NVMe 2T disks. When booting with Kernel 5.15.0, I receive the following dmesg output:

...

Jun 09 03:33:08 kubuntu kernel: nvme 0000:04:00.0: platform quirk: setting
simple suspend
Jun 09 03:33:08 kubuntu kernel: nvme nvme0: pci function 0000:04:00.0
Jun 09 03:33:08 kubuntu kernel: nvme 0000:06:00.0: platform quirk: setting
simple suspend
Jun 09 03:33:08 kubuntu kernel: nvme nvme1: pci function 0000:06:00.0
Jun 09 03:33:08 kubuntu kernel: nvme 0000:05:00.0: platform quirk: setting
simple suspend
Jun 09 03:33:08 kubuntu kernel: nvme nvme2: pci function 0000:05:00.0
...
Jun 09 03:33:08 kubuntu kernel: nvme nvme1: Duplicate cntlid 0 with nvme0,
rejecting
Jun 09 03:33:08 kubuntu kernel: nvme nvme1: Removing after probe failure
status: -22
Jun 09 03:33:08 kubuntu kernel: nvme nvme2: Duplicate cntlid 0 with nvme0,
rejecting
Jun 09 03:33:08 kubuntu kernel: nvme nvme2: Removing after probe failure
status: -22
Jun 09 03:33:08 kubuntu kernel: pps pps0: new PPS source ptp0
Jun 09 03:33:08 kubuntu kernel: igc 0000:0b:00.0 (unnamed net_device)
(uninitialized): PHC added
Jun 09 03:33:08 kubuntu kernel: nvme nvme0: 16/0/0 default/read/poll queues
Jun 09 03:33:08 kubuntu kernel:  nvme0n1: p1 p2 p3

...

nvme0 is properly detected, however nvme1 and nvme2 are both rejected with "Duplicate cntlid 0 with nvme0" error message.

lspci properly enumerates all of the 3 devices:
04:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5407 05:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5407 06:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5407

Consequentially, I cannot make use of nvme1 and nvme2. A quirk setting was proposed for a Samsung device [1] which was finally applied to the kernel [2].

[1] https://lkml.kernel.org/lkml/[email protected]/
[2] https://lkml.org/lkml/2021/1/18/1172

I wrote up a modified patch for Micron MTFDKBA2T0TFH devices, tested the patch and could make all three NVMe devices work flawlessly under Linux 5.15.0.

I also checked this patch against 5.15.48, it applies cleanly.

I suggest this patch be applied to latest longterm 5.15.x as well as latest Mainline as only one device has been added to the quirk table since, and the format of the quirktable was not changed in the meantime.

The proposed patch itself (also see attachment):

drivers/nvme/host/pci.c +0 -0
index b925a5f4afc3..2e5c33f3b868 100644
@@ -3372,5 +3372,7 @@ static const struct pci_device_id nvme_id_table[] = {

NVME_QUIRK_128_BYTES_SQES |
NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+ { PCI_DEVICE(0x1344, 0x5407), /* Micron Technology Inc NVMe SSD */
+ .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN },

        { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
        { 0, }

};

Signature · 6 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

----- End forwarded message -----
maintainer
#1 lore raw
Quoted 10 lines · Bjorn Helgaas

The proposed patch itself (also see attachment):

drivers/nvme/host/pci.c +0 -0
index b925a5f4afc3..2e5c33f3b868 100644
@@ -3372,5 +3372,7 @@ static const struct pci_device_id nvme_id_table[] = {

NVME_QUIRK_128_BYTES_SQES |
NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, },

drivers/nvme/host/pci.c

Quoted 5 lines
drivers/nvme/host/pci.c +2 -0
+       { PCI_DEVICE(0x1344, 0x5407), /* Micron Technology Inc NVMe SSD */
+               .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN },
        { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
        { 0, }
 };

Coould you send this as an actual patch to the mailing list so we can include it in the next pull request?