ARM: dts: am33xx: Fix MMCHS0 dma properties
PATCH 1/1 ARM: dts: am33xx: Fix MMCHS0 dma properties
According to technical manual(table 11-24), the DMA of MMCHS0 should be direct mapped.
Signed-off-by YuTong Chang <[email protected]>
---
v1: Cleaned up coding style and addressed review comments
arch/arm/boot/dts/am33xx-l4.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/boot/dts/am33xx-l4.dtsi +1 -2
@@ -1502,8 +1502,7 @@ SYSC_OMAP2_SOFTRESET | mmc1: mmc@0 { compatible = "ti,am335-sdhci"; ti,needs-special-reset; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>;
Signature · 1 line
2.36.1
Quoted 4 lines · YuTong Chang
According to technical manual(table 11-24), the DMA of MMCHS0 should be direct mapped.
Signed-off-by YuTong Chang <[email protected]>
This should be v2, not v1. You already sent a v1.
Quoted 11 lines
---
v1: Cleaned up coding style and addressed review commentsarch/arm/boot/dts/am33xx-l4.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)arch/arm/boot/dts/am33xx-l4.dtsi +0
-0
arch/arm/boot/dts/am33xx-l4.dtsi SYSC_OMAP2_SOFTRESET | · line 1508
Quoted 9 lines
arch/arm/boot/dts/am33xx-l4.dtsi +1
-2@@ -1502,8 +1502,7 @@ SYSC_OMAP2_SOFTRESET | mmc1: mmc@0 { compatible = "ti,am335-sdhci"; ti,needs-special-reset; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>;
Best regards,
Krzysztof