Add Belimo to ftdi driver
Subsystems (3)
PATCH 1/1 Add Belimo to ftdi driver
Those two known usb attributes regarding the product id are known.
Signed-off-by Luz <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 9 insertions(+)
drivers/usb/serial/ftdi_sio.c +3 -0
@@ -1023,6 +1023,9 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, +/* Belimo Automation devices */ + { USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) }, + { USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },/* ICP DAS I-756xU devices */ { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
drivers/usb/serial/ftdi_sio_ids.h +6 -0
@@ -1568,6 +1568,12 @@#define CHETCO_SEASMART_LITE_PID 0xA5AE/* SeaSmart Lite USB Adapter */ #define CHETCO_SEASMART_ANALOG_PID 0xA5AF/* SeaSmart Analog Adapter */ +/* +* Belimo Automation +*/ +#define BELIMO_ZTH_PID 0x8050 +#define BELIMO_ZIP_PID 0xC811 +/* * Unjo AB */
Signature · 1 line
2.36.0
You'll need to resend this.
1) Cc all the proper people from:
$ ./scripts/get_maintainer.pl -f drivers/usb/serial/ftdi_sio.c Johan Hovold <[email protected]> (maintainer:USB SERIAL SUBSYSTEM) Greg Kroah-Hartman <[email protected]> (supporter:USB SUBSYSTEM) [email protected] (open list:USB SERIAL SUBSYSTEM) [email protected] (open list)
2) The subject needs a subsystem prefix "USB: serial: ftdi_sio:":
[PATCH] USB: serial: ftdi_sio: add Belimo PCI ids
Quoted 3 lines · Luz
Those two known usb attributes regarding the product id are known.
Signed-off-by Luz <[email protected]>
3) This has to be your full legal name that you use on legal documents.
regards,
dan carpenter