Skip to contentSkip to conversation

Fix input value to _scratch_mkfs_sized

PATCH New An Long 1 participant 3 messages Jun 27, 2022

lore
Share & tools
lore

An Long

author
#0 lore raw

cover Fix input value to _scratch_mkfs_sized

Function _scratch_mkfs_sized cannot recognize the size descriptor.

For example, we set MKFS_OPTIONS="-b 4k" and then run generic/416 on ext4, will fail with "mkfs.ext4: invalid block size - 4".

The [PATCH 2/2] based on [PATCH 1/2].

Full story is here:
https://lore.kernel.org/fstests/Yre%[email protected]/T/#t
https://lore.kernel.org/fstests/20220621044038.ppvdexgob3kzs46m@zlang-mailbox/T/#t

An Long (2):
common/config: add _check_mkfs_block_options common/rc: fix input value to _scratch_mkfs_sized

 README        |  4 ++++
 common/config | 30 ++++++++++++++++++++++++++++++
 common/rc     | 16 +---------------
 3 files changed, 35 insertions(+), 15 deletions(-)

base-commit: 568ac9fffeb6afec03e5d6c9936617232fd7fc6d

Signature · 1 line
2.35.3
author
#2 lore raw

PATCH 2/2 common/rc: fix input value to _scratch_mkfs_sized

_scratch_mkfs_sized only receive integer number of bytes as a valid input. But if the MKFS_OPTIONS variable exists, it will use the value of block size in MKFS_OPTIONS to override input. In case of MKFS_OPTIONS="-b 4k", would result in blocksize=4 but not 4096. This will give errors to ext2/3/4 etc, and brings potential bugs to xfs or btrfs.

This patch depends on patch ("common/config: add _check_mkfs_block_options").

---
 common/rc | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)
common/rc +1 -15
index 3c072c16..8b8c3b51 100644
@@ -1036,21 +1036,7 @@ _scratch_mkfs_sized()
 	local blocksize=$2
 	local def_blksz
 
-	case $FSTYP in
-	xfs)
-		def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?size= ?+([0-9]+).*/\1/p'`
-		;;
-	btrfs)
-		def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-s ?+([0-9]+).*/\1/p'`
-		;;
-	ext2|ext3|ext4|ext4dev|udf|reiser4|ocfs2|reiserfs)
-		def_blksz=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?+([0-9]+).*/\1/p'`
-		;;
-	jfs)
-		def_blksz=4096
-		;;
-	esac
-
+	[ -n "$FS_BLOCK_SIZE" ] && def_blksz=$FS_BLOCK_SIZE
 	[ -n "$def_blksz" ] && blocksize=$def_blksz
 	[ -z "$blocksize" ] && blocksize=4096
 
Signature · 1 line
2.35.3
author
#1 lore raw

PATCH 1/2 common/config: add _check_mkfs_block_options

In reply to An Long

Add a helper to check MKFS_OPTIONS to use pure integer in bytes, and create variable FS_BLOCK_SIZE=blocksize.
For example, set MKFS_OPTIONS="-b 4096" but not "-b 4k", then FS_BLOCK_SIZE=4096.

---
 README        |  4 ++++
 common/config | 30 ++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)
README +4 -0
index 80d148be..e80b8457 100644
@@ -241,6 +241,10 @@ Misc:
    this option is supported for all filesystems currently only -overlay is
    expected to run without issues. For other filesystems additional patches
    and fixes to the test suite might be needed.
+ - If MKFS_OPTIONS contains block size, the value must be an integer number of
+   bytes without units. And the variable FS_BLOCK_SIZE will be created.
+   For example, set MKFS_OPTIONS="-b 4096" but not "-b 4k", then
+   FS_BLOCK_SIZE=4096.
 
 ______________________
 USING THE FSQA SUITE
common/config +30 -0
index de3aba15..d34b1bf3 100644
@@ -623,6 +623,34 @@ _check_device()
 	esac
 }
 
+# Check block size in $MKFS_OPTIONS is a valid integer
+# And then set the value in $FS_BLOCK_SIZE
+_check_mkfs_block_options()
+{
+        # Avoid that FS_BLOCK_SIZE is different from MKFS_OPTIONS
+        # Otherwise it will cause confusion
+        unset FS_BLOCK_SIZE
+
+        case $FSTYP in
+        xfs)
+                FS_BLOCK_SIZE=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?size= ?+([0-9]+[a-zA-Z]?).*/\1/p'`
+                ;;
+        btrfs)
+                FS_BLOCK_SIZE=`echo $MKFS_OPTIONS | sed -rn 's/.*-s ?+([0-9]+[a-zA-Z]?).*/\1/p'`
+                ;;
+        ext2|ext3|ext4|ext4dev|udf|reiser4|ocfs2|reiserfs)
+                FS_BLOCK_SIZE=`echo $MKFS_OPTIONS | sed -rn 's/.*-b ?+([0-9]+[a-zA-Z]?).*/\1/p'`
+                ;;
+        jfs)
+                FS_BLOCK_SIZE=4096
+                ;;
+        esac
+
+        if [ -n "$FS_BLOCK_SIZE" ] && ! [[ $FS_BLOCK_SIZE =~ ^[0-9]+$ ]] ; then
+		_fatal "\$MKFS_OPTIONS: block size \"$FS_BLOCK_SIZE\" not an integer."
+        fi
+}
+
 # check and return a canonical mount point path
 _canonicalize_mountpoint()
 {
@@ -896,5 +924,7 @@ else
 	fi
 fi
 
+_check_mkfs_block_options
+
 # make sure this script returns success
 /bin/true
Signature · 1 line
2.35.3