Skip to contentSkip to conversation

Migrate some wiki pages to sphinx

PATCH In review Tom Rini 5 participants 23 messages Jun 27, 2022 – Jul 9, 2022

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

cover Migrate some wiki pages to sphinx

Hey all,

As you might have seen, the DENX wiki has undergone some updates in the last few months. As of now, most pages have been restored and are up to date. But it's also true that the wiki long predates our sphinx documentation and readthedocs site (which I am very happy the work has been put in on making and improving). So to that end, I'm trying to move everything that's on the wiki over to sphinx so that it will be easier to access and keep up to date. To that end, this small series includes 3 pages being moved.

I don't know what to do about ReleaseCycle and the statics pages long term. I have a few ideas, but they're tricker so not what I want to tackle first.

I'm thinking the next page to tackle is
https://www.denx.de/wiki/U-Boot/Patches which might well end up being more than one page once moved.

And there's still some outdated information in what I'm posting here, I'm not sure if a follow-up updating it is needed now, or just when someone has a chance.

Signature · 1 line
Tom
author
#1 lore raw

PATCH 1/4 doc: Migrate CodingStyle wiki page to sphinx

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
 doc/develop/codingstyle.rst | 211 ++++++++++++++++++++++++++++++++++++
 doc/develop/index.rst       |   8 ++
 2 files changed, 219 insertions(+)
 create mode 100644 doc/develop/codingstyle.rst
doc/develop/codingstyle.rst new file +211 -0
new file mode 100644
index 000000000000..a41aed2764fb
@@ -0,0 +1,211 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Coding Style
+===================
+
+The following Coding Style requirements shall be mandatory for all code contributed to
+the U-Boot project.
+
+Exceptions are only allowed if code from other projects is integrated with no
+or only minimal changes.
+
+The following rules apply:
+
+* All contributions to U-Boot should conform to the `Linux kernel
+  coding style <https://www.kernel.org/doc/html/latest/process/coding-style.html>`_
+  and the `Linent script <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Lindent>`_.
+  * The exception for net files to the `multi-line comment
+  <https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting>`_
+  applies only to Linux, not to U-Boot. Only large hunks which are copied
+  unchanged from Linux may retain that comment format.
+* Use patman to send your patches (``tools/patman/patman -H`` for full
+  instructions). With a few tags in your commits this will check your patches
+  and take care of emailing them.
+* If you don't use patman, make sure to run ``scripts/checkpatch.pl``.  For
+  more information, read :doc:`checkpatch`.  Note that this should be done
+  *before* posting on the mailing list!
+* Source files originating from different projects (for example the MTD
+  subsystem or the hush shell code from the BusyBox project) may, after
+  careful consideration, be exempted from these rules. For such files, the
+  original coding style may be kept to ease subsequent migration to newer
+  versions of those sources.
+* Please note that U-Boot is implemented in C (and to some small parts in
+  Assembler); no C++ is used, so please do not use C++ style comments (//) in
+  your code.
+
+  * The sole exception here is for SPDX tags in some files (checkpatch.pl will warn you).
+
+* Please also stick to the following formatting rules:
+
+  * Remove any trailing white space
+  * Use TAB characters for indentation and vertical alignment, not spaces
+  * Make sure NOT to use DOS ``\r\n`` line feeds
+  * Do not add more than 2 consecutive empty lines to source files
+  * Do not add trailing empty lines to source files
+  * Using the option ``git config --global color.diff auto`` will help to
+    visually see whitespace problems in ``diff`` output from ``git``.
+  * In Emacs one can use ``=M-x whitespace-global-mode=`` to get visual
+    feedback on the nasty details. ``=M-x whitespace-cleanup=`` does The Right
+    Thing (tm)
+
+Submissions of new code or patches that do not conform to these requirements
+shall be rejected with a request to reformat the changes.
+
+U-Boot Code Documentation
+-------------------------
+
+U-Boot adopted the kernel-doc annotation style, this is the only exception from
+multi-line comment rule of Coding Style. While not mandatory, adding
+documentation is strongly advised. The Linux kernel `kernel-doc <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html>`_ documentation applies with no changes.
+applies with no changes.
+
+Use structures for I/O access
+-----------------------------
+
+U-Boot typically uses a C structure to map out the registers in an I/O region, rather than offsets. The reasons for this are:
+
+* It dissociates the register location (offset) from the register type, which
+  means the developer has to make sure the type is right for each access,
+  whereas with the struct method, this is checked by the compiler;
+* It avoids actually writing all offsets, which is (more) error- prone;
+* It allows for better compile time sanity-checking of values we write to registers.
+
+Some reasons why you might not use C structures:
+
+* Where the registers appear at different offsets in different hardware
+  revisions supported by the same driver
+* Where the driver only uses a small subset of registers and it is not worth
+  defining a struct to cover them all, with large empty regions
+* Where the offset of a register might be hard to figure out when buried a long
+  way down a structure, possibly with embedded sub-structures
+* This may need to change to the kernel model if we allow for more run-time
+  detection of what drivers are appropriate for what we're running on.
+
+Please use check_member() to verify that your structure is the expected size, or that particular members appear at the right offset.
+
+Include files
+-------------
+
+You should follow this ordering in U-Boot. The common.h header (which is going away at some point) should always be first, followed by other headers in order, then headers with directories, then local files::
+
+   <common.h>
+   <bootstage.h>
+   <dm.h>
+   <others.h>
+   <asm/...>
+   <arm/arch/...>
+   <dm/device_compat/.h>
+   <linux/...>
+   "local.h"
+
+Within that order, sort your includes.
+
+It is important to include common.h first since it provides basic features used by most files, e.g. CONFIG options.
+
+For files that need to be compiled for the host (e.g. tools), you need to use ``#ifndef USE_HOSTCC`` to avoid including common.h since it includes a lot of internal U-Boot things. See common/image.c for an example.
+
+If your file uses driver model, include <dm.h> in the C file. Do not include dm.h in a header file. Try to use forward declarations (e.g. ``struct udevice``) instead.
+
+Filenames
+---------
+
+For .c and .h files try to use underscore rather than hyphen unless you want the file to stand out (e.g. driver-model uclasses should be named xxx-uclass.h. Avoid upper case and keep the names fairly short.
+
+Function and struct comments
+----------------------------
+
+Non-trivial functions should have a comment which describes what they do. If it is an exported function, put the comment in the header file so the API is in one place. If it is a static function, put it in the C file.
+
+If the function returns errors, mention that and list the different errors that are returned. If it is merely passing errors back from a function it calls, then you can skip that.
+
+See `here <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation>`_ for style.
+
+Driver model
+------------
+
+When declaring a device, try to use ``struct udevice *dev``, i.e. ``dev`` as the name::
+
+   struct udevice *dev;
+
+Use ``ret`` as the return value::
+
+   struct udevice *dev;
+   int ret;
+
+   ret = uclass_first_device_err(UCLASS_ACPI_PMC, &dev);
+   if (ret)
+           return log_msg_ret("pmc", dev);
+
+Consider using log_reg() or log_msg_ret() to return a value (see above)
+
+Add a ``p`` suffix on return arguments::
+
+   int dm_pci_find_class(uint find_class, int index, struct udevice **devp)
+   {
+   ...
+           *devp = dev;
+
+           return 0;
+   }
+
+There are standard variable names that you should use in drivers:
+
+* ``struct xxx_priv`` and ``priv`` for dev_get_priv()
+* ``struct xxx_plat`` and ``plat`` for dev_get_platdata()
+
+For example::
+
+   struct simple_bus_plat {
+      u32 base;
+      u32 size;
+      u32 target;
+   };
+
+   /* Davinci MMC board definitions */
+   struct davinci_mmc_priv {
+      struct davinci_mmc_regs *reg_base;   /* Register base address */
+      uint input_clk;      /* Input clock to MMC controller */
+      struct gpio_desc cd_gpio;       /* Card Detect GPIO */
+      struct gpio_desc wp_gpio;       /* Write Protect GPIO */
+   };
+
+      struct rcar_gpio_priv *priv = dev_get_priv(dev);
+
+      struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+
+Other
+-----
+
+Some minor things:
+
+* Put a blank line before the last ``return`` in a function unless it is the only line::
+
+   struct udevice *pci_get_controller(struct udevice *dev)
+   {
+      while (device_is_on_pci_bus(dev))
+         dev = dev->parent;
+
+      return dev;
+   }
+
+Tests
+-----
+
+
+Please add tests when you add code. Please change or expand tests when you change code.
+
+Run the tests with::
+
+   make check
+   make qcheck   (skips some tests)
+
+Python tests are in test/py/tests - see the docs in test/py for info.
+
+Try to write your tests in C if you can. For example, tests to check a command
+will be much faster (10-100x or more) if they can directly call run_command()
+and ut_check_console_line() instead of using Python to send commands over a
+pipe to U-Boot.
+
+Tests run all supported CI systems (gitlab, travis, azure) using scripts in the
+root of the U-Boot tree.
+
doc/develop/index.rst +8 -0
index fe3564a9fbf4..dde47994c71a 100644
@@ -3,6 +3,14 @@
 Develop U-Boot
 ==============
 
+General
+-------
+
+.. toctree::
+   :maxdepth: 1
+
+   codingstyle
+
 Implementation
 --------------
 
Signature · 1 line
2.25.1
Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx

Quoted 5 lines · Tom Rini

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

Quoted 7 lines
---
 doc/develop/codingstyle.rst | 211 ++++++++++++++++++++++++++++++++++++
 doc/develop/index.rst       |   8 ++
 2 files changed, 219 insertions(+)
 create mode 100644 doc/develop/codingstyle.rst
#3 lore raw

Re: [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx

Quoted 14 lines · Simon Glass
Quoted 5 lines · Tom Rini

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

Quoted 7 lines
---
  doc/develop/codingstyle.rst | 211 ++++++++++++++++++++++++++++++++++++
  doc/develop/index.rst       |   8 ++
  2 files changed, 219 insertions(+)

create mode 100644 doc/develop/codingstyle.rst

Quoted 1 line

Please, don't add Reviewed-by if you did not have the time to thoroughly review the patch. Acked-by is more adequate in this case.

Best regards

Heinrich

#4 lore raw

Re: [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx

In reply to Tom Rini
Quoted 3 lines · Tom Rini

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

%s/sphinx/Sphinx/

Quoted 20 lines
---
  doc/develop/codingstyle.rst | 211 ++++++++++++++++++++++++++++++++++++
  doc/develop/index.rst       |   8 ++
  2 files changed, 219 insertions(+)

create mode 100644 doc/develop/codingstyle.rst

doc/develop/codingstyle.rst new file +6 -0
new file mode 100644
index 000000000000..a41aed2764fb
@@ -0,0 +1,211 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Coding Style
+===================
+
+The following Coding Style requirements shall be mandatory for all code contributed to

doc/develop/codingstyle.rst line 16

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+the U-Boot project.
+
+Exceptions are only allowed if code from other projects is integrated with no
+or only minimal changes.
+
+The following rules apply:
+
+* All contributions to U-Boot should conform to the `Linux kernel
+  coding style <https://www.kernel.org/doc/html/latest/process/coding-style.html>`_
+  and the `Linent script <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Lindent>`_.

%s/Linent/Lindent/g

Please, use blank lines between bullets.
Cf. https://sublime-and-sphinx-guide.readthedocs.io/en/latest/lists.html

Please, mention explicitly that all structures, enumerations, unions and functions shall be described according to
https://docs.kernel.org/doc-guide/kernel-doc.html

doc/develop/codingstyle.rst line 18

Quoted 2 lines
doc/develop/codingstyle.rst new file +2 -0
+  * The exception for net files to the `multi-line comment
+  <https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting>`_

Incorrect indentation (add 2 spaces).

doc/develop/codingstyle.rst line 20

Quoted 2 lines
doc/develop/codingstyle.rst new file +2 -0
+  applies only to Linux, not to U-Boot. Only large hunks which are copied
+  unchanged from Linux may retain that comment format.

blank line missing

doc/develop/codingstyle.rst line 23

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+* Use patman to send your patches (``tools/patman/patman -H`` for full
+  instructions). With a few tags in your commits this will check your patches
+  and take care of emailing them.

ditto

doc/develop/codingstyle.rst line 26

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+* If you don't use patman, make sure to run ``scripts/checkpatch.pl``.  For
+  more information, read :doc:`checkpatch`.  Note that this should be done
+  *before* posting on the mailing list!

ditto

doc/develop/codingstyle.rst line 31

Quoted 5 lines
doc/develop/codingstyle.rst new file +5 -0
+* Source files originating from different projects (for example the MTD
+  subsystem or the hush shell code from the BusyBox project) may, after
+  careful consideration, be exempted from these rules. For such files, the
+  original coding style may be kept to ease subsequent migration to newer
+  versions of those sources.

ditto

doc/develop/codingstyle.rst line 40

Quoted 9 lines
doc/develop/codingstyle.rst new file +9 -0
+* Please note that U-Boot is implemented in C (and to some small parts in
+  Assembler); no C++ is used, so please do not use C++ style comments (//) in
+  your code.
+
+  * The sole exception here is for SPDX tags in some files (checkpatch.pl will warn you).
+
+* Please also stick to the following formatting rules:
+
+  * Remove any trailing white space

ditto

Quoted 9 lines
doc/develop/codingstyle.rst new file +9 -0
+  * Use TAB characters for indentation and vertical alignment, not spaces
+  * Make sure NOT to use DOS ``\r\n`` line feeds
+  * Do not add more than 2 consecutive empty lines to source files
+  * Do not add trailing empty lines to source files
+  * Using the option ``git config --global color.diff auto`` will help to
+    visually see whitespace problems in ``diff`` output from ``git``.
+  * In Emacs one can use ``=M-x whitespace-global-mode=`` to get visual
+    feedback on the nasty details. ``=M-x whitespace-cleanup=`` does The Right
+    Thing (tm)

doc/develop/codingstyle.rst line 59

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+
+Submissions of new code or patches that do not conform to these requirements
+shall be rejected with a request to reformat the changes.
+
+U-Boot Code Documentation
+-------------------------
+
+U-Boot adopted the kernel-doc annotation style, this is the only exception from
+multi-line comment rule of Coding Style. While not mandatory, adding
+documentation is strongly advised. The Linux kernel `kernel-doc <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html>`_ documentation applies with no changes.

Developers tend to read the rst files with text editors. Please, keep lines short (80 characters). `kernel-doc can go onto the next line.

doc/develop/codingstyle.rst line 69

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+applies with no changes.
+
+Use structures for I/O access
+-----------------------------
+
+U-Boot typically uses a C structure to map out the registers in an I/O region, rather than offsets. The reasons for this are:
+
+* It dissociates the register location (offset) from the register type, which
+  means the developer has to make sure the type is right for each access,
+  whereas with the struct method, this is checked by the compiler;

Please, add blank lines between bullets.

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+* It avoids actually writing all offsets, which is (more) error- prone;
+* It allows for better compile time sanity-checking of values we write to registers.
+
+Some reasons why you might not use C structures:
+
+* Where the registers appear at different offsets in different hardware
+  revisions supported by the same driver
+* Where the driver only uses a small subset of registers and it is not worth
+  defining a struct to cover them all, with large empty regions
+* Where the offset of a register might be hard to figure out when buried a long

doc/develop/codingstyle.rst line 89

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+  way down a structure, possibly with embedded sub-structures
+* This may need to change to the kernel model if we allow for more run-time
+  detection of what drivers are appropriate for what we're running on.
+
+Please use check_member() to verify that your structure is the expected size, or that particular members appear at the right offset.
+
+Include files
+-------------
+
+You should follow this ordering in U-Boot. The common.h header (which is going away at some point) should always be first, followed by other headers in order, then headers with directories, then local files::

Please, allow syntax highlighting:

%s/::/:/

.. code-block:: C

doc/develop/codingstyle.rst line 91

Quoted 2 lines
doc/develop/codingstyle.rst new file +2 -0
+
+   <common.h>

Please, add #include to each line.

Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+   <bootstage.h>
+   <dm.h>
+   <others.h>
+   <asm/...>

doc/develop/codingstyle.rst line 105

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+   <arm/arch/...>
+   <dm/device_compat/.h>
+   <linux/...>
+   "local.h"
+
+Within that order, sort your includes.
+
+It is important to include common.h first since it provides basic features used by most files, e.g. CONFIG options.
+
+For files that need to be compiled for the host (e.g. tools), you need to use ``#ifndef USE_HOSTCC`` to avoid including common.h since it includes a lot of internal U-Boot things. See common/image.c for an example.

Please, try to keep lines at 80 characters each.

Quoted 15 lines
doc/develop/codingstyle.rst new file +15 -0
+
+If your file uses driver model, include <dm.h> in the C file. Do not include dm.h in a header file. Try to use forward declarations (e.g. ``struct udevice``) instead.
+
+Filenames
+---------
+
+For .c and .h files try to use underscore rather than hyphen unless you want the file to stand out (e.g. driver-model uclasses should be named xxx-uclass.h. Avoid upper case and keep the names fairly short.
+
+Function and struct comments
+----------------------------
+
+Non-trivial functions should have a comment which describes what they do. If it is an exported function, put the comment in the header file so the API is in one place. If it is a static function, put it in the C file.
+
+If the function returns errors, mention that and list the different errors that are returned. If it is merely passing errors back from a function it calls, then you can skip that.
+

doc/develop/codingstyle.rst line 130

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+See `here <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation>`_ for style.
+
+Driver model
+------------
+
+When declaring a device, try to use ``struct udevice *dev``, i.e. ``dev`` as the name::
+
+   struct udevice *dev;
+
+Use ``ret`` as the return value::

%s/::/:/

.. code-block:: C

doc/develop/codingstyle.rst line 139

Quoted 9 lines
doc/develop/codingstyle.rst new file +9 -0
+
+   struct udevice *dev;
+   int ret;
+
+   ret = uclass_first_device_err(UCLASS_ACPI_PMC, &dev);
+   if (ret)
+           return log_msg_ret("pmc", dev);
+
+Consider using log_reg() or log_msg_ret() to return a value (see above)

%s/log_reg/log_ret/

doc/develop/codingstyle.rst line 142

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+
+Add a ``p`` suffix on return arguments::
+

%s/::/:/

.. code-block:: C

Quoted 5 lines
doc/develop/codingstyle.rst new file +5 -0
+   int dm_pci_find_class(uint find_class, int index, struct udevice **devp)
+   {
+   ...
+           *devp = dev;
+

doc/develop/codingstyle.rst line 157

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+           return 0;
+   }
+
+There are standard variable names that you should use in drivers:
+
+* ``struct xxx_priv`` and ``priv`` for dev_get_priv()
+* ``struct xxx_plat`` and ``plat`` for dev_get_platdata()
+
+For example::
+

%s/::/:/

.. code-block:: C

Quoted 15 lines
doc/develop/codingstyle.rst new file +15 -0
+   struct simple_bus_plat {
+      u32 base;
+      u32 size;
+      u32 target;
+   };
+
+   /* Davinci MMC board definitions */
+   struct davinci_mmc_priv {
+      struct davinci_mmc_regs *reg_base;   /* Register base address */
+      uint input_clk;      /* Input clock to MMC controller */
+      struct gpio_desc cd_gpio;       /* Card Detect GPIO */
+      struct gpio_desc wp_gpio;       /* Write Protect GPIO */
+   };
+
+      struct rcar_gpio_priv *priv = dev_get_priv(dev);

doc/develop/codingstyle.rst line 182

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+
+      struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
+
+Other
+-----
+
+Some minor things:
+
+* Put a blank line before the last ``return`` in a function unless it is the only line::
+

%s/::/:/

.. code-block:: C

Quoted 6 lines
doc/develop/codingstyle.rst new file +6 -0
+   struct udevice *pci_get_controller(struct udevice *dev)
+   {
+      while (device_is_on_pci_bus(dev))
+         dev = dev->parent;
+
+      return dev;

doc/develop/codingstyle.rst line 198

Quoted 10 lines
doc/develop/codingstyle.rst new file +10 -0
+   }
+
+Tests
+-----
+
+
+Please add tests when you add code. Please change or expand tests when you change code.
+
+Run the tests with::
+

%s/::/:/

.. code-block:: bash

doc/develop/codingstyle.rst line 202

Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+   make check
+   make qcheck   (skips some tests)
+
+Python tests are in test/py/tests - see the docs in test/py for info.

Please, add a reference to doc/develop/tests_writing.rst

doc/develop/codingstyle.rst line 205

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+
+Try to write your tests in C if you can. For example, tests to check a command
+will be much faster (10-100x or more) if they can directly call run_command()

%s/10-100x/10 - 100x/
Please, avoid duplicating information from tests_writing.rst.

doc/develop/codingstyle.rst line 209

Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+and ut_check_console_line() instead of using Python to send commands over a
+pipe to U-Boot.
+
+Tests run all supported CI systems (gitlab, travis, azure) using scripts in the

%s/gitlab/Gitlab/
%s/azure/Azure/

We don't use Travis CI anymore.

doc/develop/codingstyle.rst line 211

Quoted 2 lines
doc/develop/codingstyle.rst new file +2 -0
+root of the U-Boot tree.
+

Please, avoid empty line at end of file.

Best regards

Heinrich

Quoted 9 lines
doc/develop/index.rst +1 -0
index fe3564a9fbf4..dde47994c71a 100644
@@ -3,6 +3,14 @@
  Develop U-Boot
  ==============
 
+General

doc/develop/index.rst line 16

Quoted 10 lines
doc/develop/index.rst +7 -0
+-------
+
+.. toctree::
+   :maxdepth: 1
+
+   codingstyle
+
  Implementation
  --------------
 

a

author
#5 lore raw

Re: [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx

Quoted 6 lines · Heinrich Schuchardt
Quoted 3 lines · Tom Rini

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

%s/sphinx/Sphinx/

For the wiki->rST changes, OK, I'll do v2 (for the series). For everything else, I would prefer to do the import as-is as much as possible and then start making real changes as follow-up patches.

Signature · 1 line
Tom
author
#6 lore raw

Re: [PATCH 1/4] doc: Migrate CodingStyle wiki page to sphinx

In reply to Heinrich Schuchardt
Quoted 4 lines · Heinrich Schuchardt
Quoted 3 lines · Tom Rini

Move the current CodingStyle wiki page to doc/develop/codingstyle.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

[snip]

Quoted 6 lines

doc/develop/codingstyle.rst line 59

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+U-Boot adopted the kernel-doc annotation style, this is the only exception from
+multi-line comment rule of Coding Style. While not mandatory, adding
+documentation is strongly advised. The Linux kernel `kernel-doc <https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html>`_ documentation applies with no changes.

Developers tend to read the rst files with text editors. Please, keep lines short (80 characters). `kernel-doc can go onto the next line.

Linux doesn't have a hard 80 character limit anymore and neither do we, keep in mind.

Quoted 4 lines
Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+applies with no changes.
+
+Use structures for I/O access
+-----------------------------
Quoted 8 lines

doc/develop/codingstyle.rst line 69

Quoted 6 lines
doc/develop/codingstyle.rst new file +6 -0
+
+U-Boot typically uses a C structure to map out the registers in an I/O region, rather than offsets. The reasons for this are:
+
+* It dissociates the register location (offset) from the register type, which
+  means the developer has to make sure the type is right for each access,
+  whereas with the struct method, this is checked by the compiler;

Please, add blank lines between bullets.

Different than markdown, OK.

[snip]

Quoted 35 lines

doc/develop/codingstyle.rst line 198

Quoted 8 lines
doc/develop/codingstyle.rst new file +8 -0
+Tests
+-----
+
+
+Please add tests when you add code. Please change or expand tests when you change code.
+
+Run the tests with::
+

%s/::/:/

.. code-block:: bash

doc/develop/codingstyle.rst line 202

Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+   make check
+   make qcheck   (skips some tests)
+
+Python tests are in test/py/tests - see the docs in test/py for info.

Please, add a reference to doc/develop/tests_writing.rst

doc/develop/codingstyle.rst line 205

Quoted 3 lines
doc/develop/codingstyle.rst new file +3 -0
+
+Try to write your tests in C if you can. For example, tests to check a command
+will be much faster (10-100x or more) if they can directly call run_command()

%s/10-100x/10 - 100x/
Please, avoid duplicating information from tests_writing.rst.

doc/develop/codingstyle.rst line 209

Quoted 4 lines
doc/develop/codingstyle.rst new file +4 -0
+and ut_check_console_line() instead of using Python to send commands over a
+pipe to U-Boot.
+
+Tests run all supported CI systems (gitlab, travis, azure) using scripts in the

%s/gitlab/Gitlab/
%s/azure/Azure/

Quoted 1 line

We don't use Travis CI anymore.

This is more substantive than wiki->rST so I'll handle this in another patch.

Signature · 1 line
Tom
author
#7 lore raw

PATCH 2/4 doc: Migrate DesignPrinciples wiki page to sphinx

In reply to Tom Rini

Move the current DesignPrinciples wiki page to doc/develop/designprinciples.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
 doc/develop/designprinciples.rst | 197 +++++++++++++++++++++++++++++++
 doc/develop/index.rst            |   1 +
 2 files changed, 198 insertions(+)
 create mode 100644 doc/develop/designprinciples.rst
doc/develop/designprinciples.rst new file +197 -0
new file mode 100644
index 000000000000..79694db77604
@@ -0,0 +1,197 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Design Principles
+========================
+
+The 10 Golden Rules of U-Boot design
+------------------------------------
+
+Keep it Small
+^^^^^^^^^^^^^
+
+U-Boot is a Boot Loader, i.e. its primary purpose in the shipping
+system is to load some operating system.
+That means that U-Boot is
+necessary to perform a certain task, but it's nothing you want to
+throw any significant resources at. Typically U-Boot is stored in
+relatively small NOR flash memory, which is expensive
+compared to the much larger NAND devices often used to store the
+operating system and the application.
+
+At the moment, U-Boot supports boards with just 128 !KiB ROM or with
+256 !KiB NOR flash. We should not easily ignore such configurations -
+they may be the exception in among all the other supported boards,
+but if a design uses such a resource-constrained hardware setup it is
+usually because costs are critical, i. e. because the number of
+manufactured boards might be tens or hundreds of thousands or even
+millions...
+
+A usable and useful configuration of U-Boot, including a basic
+interactive command interpreter, support for download over Ethernet
+and the capability to program the flash shall fit in no more than 128 !KiB.
+
+Keep it Fast
+^^^^^^^^^^^^
+
+The end user is not interested in running U-Boot. In most embedded
+systems he is not even aware that U-Boot exists. The user wants to
+run some application code, and that as soon as possible after switching
+on his device.
+
+It is therefore essential that U-Boot is as fast as possible,
+especially that it loads and boots the operating system as fast as possible.
+
+To achieve this, the following design principles shall be followed:
+
+* Enable caches as soon and whenever possible
+* Initialize devices only when they are needed within U-Boot, i.e. don't
+  initialize the Ethernet interface(s) unless U-Boot performs a download over
+  Ethernet; don't  initialize any IDE or USB devices unless U-Boot actually
+  tries to load files from these, etc.  (and don't forget to shut down these
+  devices after using them  - otherwise nasty things may happen when you try to
+  boot your OS).
+
+Also, building of U-Boot shall be as fast as possible.
+This makes it easier to run a build for all supported configurations
+or at least for all configurations of a specific architecture,
+which is essential for quality assurance.
+If building is cumbersome and slow, most people will omit
+this important step.
+
+Keep it Simple
+^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities
+
+Keep it Portable
+^^^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities that are
+very closely related to hardware development. So far, it has been
+ported to several hundreds of different boards on about 30 different
+processor families - please make sure that any code you add can be
+used on as many different platforms as possible.
+
+Avoid assembly language whenever possible - only the reset code with
+basic CPU initialization, maybe a static DRAM initialization and the C
+stack setup should be in assembly.
+All further initializations should be done in C using assembly/C
+subroutines or inline macros. These functions represent some
+kind of HAL functionality and should be defined consistently on all
+architectures. E.g. Basic MMU and cache control, stack pointer manipulation.
+Non-existing functions should expand into empty macros or error codes.
+
+Don't make assumptions over the environment where U-Boot is running.
+It may be communicating with a human operator on directly attached
+serial console, but it may be through a GSM modem as well, or driven
+by some automatic test or control system. So don't output any fancy
+control character sequences or similar.
+
+Keep it Configurable
+^^^^^^^^^^^^^^^^^^^^
+
+Section "Keep it Small" already explains about the size restrictions
+for U-Boot on one side. On the other side, U-Boot is a powerful tool
+with many, many extremely useful features. The maintainer or user of
+each board will have to decide which features are important to him and
+what shall be included with his specific board configuration to meet
+his current requirements and restrictions.
+
+Please make sure that it is easy to add or remove features from a
+board configuration, so everybody can make the best use of U-Boot on
+his system.
+
+If a feature is not included, it should not have any residual code
+bloating the build.
+
+Keep it Debuggable
+^^^^^^^^^^^^^^^^^^
+
+Of course debuggable code is a big benefit for all of us contributing
+in one way or another to the development of the U-Boot project. But
+as already mentioned in section "Keep it Portable" above, U-Boot is
+not only a tool in itself, it is often also used for hardware
+bring-up, so debugging U-Boot often means that we don't know if we are
+tracking down a problem in the U-Boot software or in the hardware we
+are running on. Code that is clean and easy to understand and to
+debug is all the more important to many of us.
+
+* One important feature of U-Boot is to enable output to the (usually serial)
+  console as soon as possible in the boot process, even if this causes
+  tradeoffs in other areas like memory footprint.
+* All initialization steps shall print some "begin doing this" message before
+  they actually start, and some "done" message when they complete. For example,
+  RAM initialization and size detection may print a "RAM: " before they start,
+  and "256 MB\n" when done.  The purpose of this is that you can always see
+  which initialization step was running if there should be any problem.  This
+  is important not only during software development, but also for the service
+  people dealing with broken hardware in the field.
+* U-Boot should be debuggable with simple JTAG or BDM equipment.  It shall use
+  a simple, single-threaded execution model.  Avoid any magic, which could
+  prevent easy debugging even when only 1 or 2 hardware breakpoints are
+  available.
+
+Keep it Usable
+^^^^^^^^^^^^^^
+
+Please always keep in mind that there are at least three different
+groups of users for U-Boot, with completely different expectations
+and requirements:
+
+* The end user of an embedded device just wants to run some application; he
+  does not even want to know that U-Boot exists and only rarely interacts with
+  it (for example to perform a reset to factory default settings etc.)
+* System designers and engineers working on the development of the application
+  and/or the operating system want a powerful tool that can boot from any boot
+  device they can imagine, they want it fast and scriptable and whatever - in
+  short, they want as many features supported as possible. And some more.
+* The engineer who ports U-Boot to a new board and the board maintainer want
+  U-Boot to be as simple as possible so porting it to and maintaining it on
+  their hardware is easy for them.
+* Make it easy to test. Add debug code (but don't re-invent the wheel - use
+  existing macros like debug() or debugX()).
+
+Please always keep in mind that U-Boot tries to meet all these
+different requirements.
+
+Keep it Maintainable
+^^^^^^^^^^^^^^^^^^^^
+
+* Avoid ``#ifdefs`` where possible
+* Use "weak" functions
+* Always follow the :doc:`codingstyle` requirements.
+
+Keep it Beautiful
+^^^^^^^^^^^^^^^^^
+
+* Keep the source code clean: strictly follow the :doc:`codingstyle`,
+  keep lists (target names in the Makefiles, board names, etc.)
+  alphabetically sorted, etc.
+* Keep U-Boot console output clean: output only really necessary information,
+  be terse but precise, keep output vertically aligned, do not use control
+  character sequences (e.g. backspaces or \\r to do "spinning wheel" activity
+  indicators), etc.
+
+Keep it Open
+^^^^^^^^^^^^
+
+Contribute your work back to the whole community. Submit your changes
+and extensions as patches to the U-Boot mailing list.
+
+Lemmas from the golden rules
+----------------------------
+
+Generic Code is Good Code
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+New code shall be as generic as possible and added to the U-Boot
+abstraction hierarchy as high as possible. As few code as possible shall be
+added in board directories as people usually do not expect re-usable code
+there.  Thus peripheral drivers should be put below
+"drivers" even if they start out supporting only one specific
+configuration.  Note that it is not a requirement for such a first
+instance to be generic as genericity generally cannot be extrapolated
+from a single data point.
+
doc/develop/index.rst +1 -0
index dde47994c71a..c0f4f0ba413a 100644
@@ -10,6 +10,7 @@ General
    :maxdepth: 1
 
    codingstyle
+   designprinciples
 
 Implementation
 --------------
Signature · 1 line
2.25.1
Reviewed-by on v1 2/4
#8 lore raw

Re: [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx

Quoted 6 lines · Tom Rini

Move the current DesignPrinciples wiki page to doc/develop/designprinciples.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

Quoted 6 lines
---
 doc/develop/designprinciples.rst | 197 +++++++++++++++++++++++++++++++
 doc/develop/index.rst            |   1 +
 2 files changed, 198 insertions(+)
 create mode 100644 doc/develop/designprinciples.rst
#9 lore raw

Re: [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx

In reply to Tom Rini

Hi Tom,

Quoted 45 lines · Tom Rini

Move the current DesignPrinciples wiki page to doc/develop/designprinciples.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/designprinciples.rst | 197 +++++++++++++++++++++++++++++++
  doc/develop/index.rst            |   1 +
  2 files changed, 198 insertions(+)

create mode 100644 doc/develop/designprinciples.rst

doc/develop/designprinciples.rst new file +27 -0
new file mode 100644
index 000000000000..79694db77604
@@ -0,0 +1,197 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Design Principles
+========================
+
+The 10 Golden Rules of U-Boot design
+------------------------------------
+
+Keep it Small
+^^^^^^^^^^^^^
+
+U-Boot is a Boot Loader, i.e. its primary purpose in the shipping
+system is to load some operating system.
+That means that U-Boot is
+necessary to perform a certain task, but it's nothing you want to
+throw any significant resources at. Typically U-Boot is stored in
+relatively small NOR flash memory, which is expensive
+compared to the much larger NAND devices often used to store the
+operating system and the application.
+
+At the moment, U-Boot supports boards with just 128 !KiB ROM or with
+256 !KiB NOR flash. We should not easily ignore such configurations -
+they may be the exception in among all the other supported boards,
+but if a design uses such a resource-constrained hardware setup it is
+usually because costs are critical, i. e. because the number of
+manufactured boards might be tens or hundreds of thousands or even
+millions...

doc/develop/designprinciples.rst line 37

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+
+A usable and useful configuration of U-Boot, including a basic
+interactive command interpreter, support for download over Ethernet
+and the capability to program the flash shall fit in no more than 128 !KiB.
+
+Keep it Fast
+^^^^^^^^^^^^
+
+The end user is not interested in running U-Boot. In most embedded
+systems he is not even aware that U-Boot exists. The user wants to

he is -> they are

doc/develop/designprinciples.rst line 39

Quoted 2 lines
doc/develop/designprinciples.rst new file +2 -0
+run some application code, and that as soon as possible after switching
+on his device.

his -> their

Quoted 16 lines
doc/develop/designprinciples.rst new file +16 -0
+
+It is therefore essential that U-Boot is as fast as possible,
+especially that it loads and boots the operating system as fast as possible.
+
+To achieve this, the following design principles shall be followed:
+
+* Enable caches as soon and whenever possible
+* Initialize devices only when they are needed within U-Boot, i.e. don't
+  initialize the Ethernet interface(s) unless U-Boot performs a download over
+  Ethernet; don't  initialize any IDE or USB devices unless U-Boot actually
+  tries to load files from these, etc.  (and don't forget to shut down these
+  devices after using them  - otherwise nasty things may happen when you try to
+  boot your OS).
+
+Also, building of U-Boot shall be as fast as possible.
+This makes it easier to run a build for all supported configurations

doc/develop/designprinciples.rst line 65

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+or at least for all configurations of a specific architecture,
+which is essential for quality assurance.
+If building is cumbersome and slow, most people will omit
+this important step.
+
+Keep it Simple
+^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities

. is missing at the end of the sentence

Quoted 23 lines
doc/develop/designprinciples.rst new file +23 -0
+
+Keep it Portable
+^^^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities that are
+very closely related to hardware development. So far, it has been
+ported to several hundreds of different boards on about 30 different
+processor families - please make sure that any code you add can be
+used on as many different platforms as possible.
+
+Avoid assembly language whenever possible - only the reset code with
+basic CPU initialization, maybe a static DRAM initialization and the C
+stack setup should be in assembly.
+All further initializations should be done in C using assembly/C
+subroutines or inline macros. These functions represent some
+kind of HAL functionality and should be defined consistently on all
+architectures. E.g. Basic MMU and cache control, stack pointer manipulation.
+Non-existing functions should expand into empty macros or error codes.
+
+Don't make assumptions over the environment where U-Boot is running.
+It may be communicating with a human operator on directly attached
+serial console, but it may be through a GSM modem as well, or driven

doc/develop/designprinciples.rst line 98

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+by some automatic test or control system. So don't output any fancy
+control character sequences or similar.
+
+Keep it Configurable
+^^^^^^^^^^^^^^^^^^^^
+
+Section "Keep it Small" already explains about the size restrictions
+for U-Boot on one side. On the other side, U-Boot is a powerful tool
+with many, many extremely useful features. The maintainer or user of
+each board will have to decide which features are important to him and

him -> them

doc/develop/designprinciples.rst line 99

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+what shall be included with his specific board configuration to meet

his -> their

doc/develop/designprinciples.rst line 100

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+his current requirements and restrictions.

here again

doc/develop/designprinciples.rst line 104

Quoted 4 lines
doc/develop/designprinciples.rst new file +4 -0
+
+Please make sure that it is easy to add or remove features from a
+board configuration, so everybody can make the best use of U-Boot on
+his system.

here as well

Quoted 30 lines
doc/develop/designprinciples.rst new file +30 -0
+
+If a feature is not included, it should not have any residual code
+bloating the build.
+
+Keep it Debuggable
+^^^^^^^^^^^^^^^^^^
+
+Of course debuggable code is a big benefit for all of us contributing
+in one way or another to the development of the U-Boot project. But
+as already mentioned in section "Keep it Portable" above, U-Boot is
+not only a tool in itself, it is often also used for hardware
+bring-up, so debugging U-Boot often means that we don't know if we are
+tracking down a problem in the U-Boot software or in the hardware we
+are running on. Code that is clean and easy to understand and to
+debug is all the more important to many of us.
+
+* One important feature of U-Boot is to enable output to the (usually serial)
+  console as soon as possible in the boot process, even if this causes
+  tradeoffs in other areas like memory footprint.
+* All initialization steps shall print some "begin doing this" message before
+  they actually start, and some "done" message when they complete. For example,
+  RAM initialization and size detection may print a "RAM: " before they start,
+  and "256 MB\n" when done.  The purpose of this is that you can always see
+  which initialization step was running if there should be any problem.  This
+  is important not only during software development, but also for the service
+  people dealing with broken hardware in the field.
+* U-Boot should be debuggable with simple JTAG or BDM equipment.  It shall use
+  a simple, single-threaded execution model.  Avoid any magic, which could
+  prevent easy debugging even when only 1 or 2 hardware breakpoints are
+  available.

doc/develop/designprinciples.rst line 144

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+
+Keep it Usable
+^^^^^^^^^^^^^^
+
+Please always keep in mind that there are at least three different
+groups of users for U-Boot, with completely different expectations
+and requirements:
+
+* The end user of an embedded device just wants to run some application; he
+  does not even want to know that U-Boot exists and only rarely interacts with

he does -> they do

Quoted 58 lines
doc/develop/designprinciples.rst new file +53 -0
+  it (for example to perform a reset to factory default settings etc.)
+* System designers and engineers working on the development of the application
+  and/or the operating system want a powerful tool that can boot from any boot
+  device they can imagine, they want it fast and scriptable and whatever - in
+  short, they want as many features supported as possible. And some more.
+* The engineer who ports U-Boot to a new board and the board maintainer want
+  U-Boot to be as simple as possible so porting it to and maintaining it on
+  their hardware is easy for them.
+* Make it easy to test. Add debug code (but don't re-invent the wheel - use
+  existing macros like debug() or debugX()).
+
+Please always keep in mind that U-Boot tries to meet all these
+different requirements.
+
+Keep it Maintainable
+^^^^^^^^^^^^^^^^^^^^
+
+* Avoid ``#ifdefs`` where possible
+* Use "weak" functions
+* Always follow the :doc:`codingstyle` requirements.
+
+Keep it Beautiful
+^^^^^^^^^^^^^^^^^
+
+* Keep the source code clean: strictly follow the :doc:`codingstyle`,
+  keep lists (target names in the Makefiles, board names, etc.)
+  alphabetically sorted, etc.
+* Keep U-Boot console output clean: output only really necessary information,
+  be terse but precise, keep output vertically aligned, do not use control
+  character sequences (e.g. backspaces or \\r to do "spinning wheel" activity
+  indicators), etc.
+
+Keep it Open
+^^^^^^^^^^^^
+
+Contribute your work back to the whole community. Submit your changes
+and extensions as patches to the U-Boot mailing list.
+
+Lemmas from the golden rules
+----------------------------
+
+Generic Code is Good Code
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+New code shall be as generic as possible and added to the U-Boot
+abstraction hierarchy as high as possible. As few code as possible shall be
+added in board directories as people usually do not expect re-usable code
+there.  Thus peripheral drivers should be put below
+"drivers" even if they start out supporting only one specific
+configuration.  Note that it is not a requirement for such a first
+instance to be generic as genericity generally cannot be extrapolated
+from a single data point.
+
doc/develop/index.rst +0 -0
index dde47994c71a..c0f4f0ba413a 100644

doc/develop/index.rst General · line 16

Quoted 7 lines
doc/develop/index.rst +1 -0
@@ -10,6 +10,7 @@ General
     :maxdepth: 1
 
     codingstyle
+   designprinciples
 
  Implementation
  --------------

regards,
Claudius

#10 lore raw

Re: [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx

In reply to Tom Rini
Quoted 30 lines · Tom Rini

Move the current DesignPrinciples wiki page to doc/develop/designprinciples.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/designprinciples.rst | 197 +++++++++++++++++++++++++++++++
  doc/develop/index.rst            |   1 +
  2 files changed, 198 insertions(+)

create mode 100644 doc/develop/designprinciples.rst

doc/develop/designprinciples.rst new file +12 -0
new file mode 100644
index 000000000000..79694db77604
@@ -0,0 +1,197 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Design Principles
+========================
+
+The 10 Golden Rules of U-Boot design
+------------------------------------
+
+Keep it Small
+^^^^^^^^^^^^^
+
+U-Boot is a Boot Loader, i.e. its primary purpose in the shipping

doc/develop/designprinciples.rst line 22

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+system is to load some operating system.
+That means that U-Boot is
+necessary to perform a certain task, but it's nothing you want to
+throw any significant resources at. Typically U-Boot is stored in
+relatively small NOR flash memory, which is expensive
+compared to the much larger NAND devices often used to store the
+operating system and the application.
+
+At the moment, U-Boot supports boards with just 128 !KiB ROM or with
+256 !KiB NOR flash. We should not easily ignore such configurations -

%s/!KiB/KiB/g

Are these numbers still true? U-Boot typically is larger than 512 KiB.

doc/develop/designprinciples.rst line 27

Quoted 5 lines
doc/develop/designprinciples.rst new file +5 -0
+they may be the exception in among all the other supported boards,
+but if a design uses such a resource-constrained hardware setup it is
+usually because costs are critical, i. e. because the number of
+manufactured boards might be tens or hundreds of thousands or even
+millions...

%s/\.\.\././

doc/develop/designprinciples.rst line 31

Quoted 4 lines
doc/develop/designprinciples.rst new file +4 -0
+
+A usable and useful configuration of U-Boot, including a basic
+interactive command interpreter, support for download over Ethernet
+and the capability to program the flash shall fit in no more than 128 !KiB.

%s/!//

This number seems to be outdated. Typically U-Boot fits into 1 MiB.

Quoted 5 lines
doc/develop/designprinciples.rst new file +5 -0
+
+Keep it Fast
+^^^^^^^^^^^^
+
+The end user is not interested in running U-Boot. In most embedded

doc/develop/designprinciples.rst line 46

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+systems he is not even aware that U-Boot exists. The user wants to
+run some application code, and that as soon as possible after switching
+on his device.
+
+It is therefore essential that U-Boot is as fast as possible,
+especially that it loads and boots the operating system as fast as possible.
+
+To achieve this, the following design principles shall be followed:
+
+* Enable caches as soon and whenever possible

Separate bullet points by blank lines, please.

doc/develop/designprinciples.rst line 50

Quoted 4 lines
doc/develop/designprinciples.rst new file +4 -0
+* Initialize devices only when they are needed within U-Boot, i.e. don't
+  initialize the Ethernet interface(s) unless U-Boot performs a download over
+  Ethernet; don't  initialize any IDE or USB devices unless U-Boot actually
+  tries to load files from these, etc.  (and don't forget to shut down these

%s/ / /

doc/develop/designprinciples.rst line 51

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+  devices after using them  - otherwise nasty things may happen when you try to

%s/ / /

Quoted 4 lines
doc/develop/designprinciples.rst new file +4 -0
+  boot your OS).
+
+Also, building of U-Boot shall be as fast as possible.
+This makes it easier to run a build for all supported configurations

doc/develop/designprinciples.rst line 65

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+or at least for all configurations of a specific architecture,
+which is essential for quality assurance.
+If building is cumbersome and slow, most people will omit
+this important step.
+
+Keep it Simple
+^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities

%/$/./

I cannot see how this sentence is related to the heading. The sentence is repeated below.

Quoted 5 lines
doc/develop/designprinciples.rst new file +5 -0
+
+Keep it Portable
+^^^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board

doc/develop/designprinciples.rst line 80

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+bring-up, for production testing, and for other activities that are
+very closely related to hardware development. So far, it has been
+ported to several hundreds of different boards on about 30 different
+processor families - please make sure that any code you add can be
+used on as many different platforms as possible.
+
+Avoid assembly language whenever possible - only the reset code with
+basic CPU initialization, maybe a static DRAM initialization and the C
+stack setup should be in assembly.
+All further initializations should be done in C using assembly/C

%s/initializations/initalization/

doc/develop/designprinciples.rst line 81

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+subroutines or inline macros. These functions represent some

Is extensive use of inline macros good coding style?

doc/develop/designprinciples.rst line 86

Quoted 5 lines
doc/develop/designprinciples.rst new file +5 -0
+kind of HAL functionality and should be defined consistently on all
+architectures. E.g. Basic MMU and cache control, stack pointer manipulation.
+Non-existing functions should expand into empty macros or error codes.
+
+Don't make assumptions over the environment where U-Boot is running.

%s/over/about/

Quoted 27 lines
doc/develop/designprinciples.rst new file +27 -0
+It may be communicating with a human operator on directly attached
+serial console, but it may be through a GSM modem as well, or driven
+by some automatic test or control system. So don't output any fancy
+control character sequences or similar.
+
+Keep it Configurable
+^^^^^^^^^^^^^^^^^^^^
+
+Section "Keep it Small" already explains about the size restrictions
+for U-Boot on one side. On the other side, U-Boot is a powerful tool
+with many, many extremely useful features. The maintainer or user of
+each board will have to decide which features are important to him and
+what shall be included with his specific board configuration to meet
+his current requirements and restrictions.
+
+Please make sure that it is easy to add or remove features from a
+board configuration, so everybody can make the best use of U-Boot on
+his system.
+
+If a feature is not included, it should not have any residual code
+bloating the build.
+
+Keep it Debuggable
+^^^^^^^^^^^^^^^^^^
+
+Of course debuggable code is a big benefit for all of us contributing
+in one way or another to the development of the U-Boot project. But

doc/develop/designprinciples.rst line 123

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+as already mentioned in section "Keep it Portable" above, U-Boot is
+not only a tool in itself, it is often also used for hardware
+bring-up, so debugging U-Boot often means that we don't know if we are
+tracking down a problem in the U-Boot software or in the hardware we
+are running on. Code that is clean and easy to understand and to
+debug is all the more important to many of us.
+
+* One important feature of U-Boot is to enable output to the (usually serial)
+  console as soon as possible in the boot process, even if this causes
+  tradeoffs in other areas like memory footprint.

Please, add blank lines between bullet points.

doc/develop/designprinciples.rst line 125

Quoted 2 lines
doc/develop/designprinciples.rst new file +2 -0
+* All initialization steps shall print some "begin doing this" message before
+  they actually start, and some "done" message when they complete. For example,

Do we really want unnecessary output? This conflicts with improving boot time.

Isn't using log_debug() preferred here?

doc/develop/designprinciples.rst line 127

Quoted 2 lines
doc/develop/designprinciples.rst new file +2 -0
+  RAM initialization and size detection may print a "RAM: " before they start,
+  and "256 MB\n" when done.  The purpose of this is that you can always see

%s/MB/MiB/

doc/develop/designprinciples.rst line 131

Quoted 4 lines
doc/develop/designprinciples.rst new file +4 -0
+  which initialization step was running if there should be any problem.  This
+  is important not only during software development, but also for the service
+  people dealing with broken hardware in the field.
+* U-Boot should be debuggable with simple JTAG or BDM equipment.  It shall use

%s/ / /

doc/develop/designprinciples.rst line 132

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+  a simple, single-threaded execution model.  Avoid any magic, which could

%s/ / /

doc/develop/designprinciples.rst line 145

Quoted 13 lines
doc/develop/designprinciples.rst new file +13 -0
+  prevent easy debugging even when only 1 or 2 hardware breakpoints are
+  available.
+
+Keep it Usable
+^^^^^^^^^^^^^^
+
+Please always keep in mind that there are at least three different
+groups of users for U-Boot, with completely different expectations
+and requirements:
+
+* The end user of an embedded device just wants to run some application; he
+  does not even want to know that U-Boot exists and only rarely interacts with
+  it (for example to perform a reset to factory default settings etc.)

Missing empty lines.

doc/develop/designprinciples.rst line 148

Quoted 3 lines
doc/develop/designprinciples.rst new file +3 -0
+* System designers and engineers working on the development of the application
+  and/or the operating system want a powerful tool that can boot from any boot
+  device they can imagine, they want it fast and scriptable and whatever - in

%s/and whatever//

doc/develop/designprinciples.rst line 149

Quoted 1 line
doc/develop/designprinciples.rst new file +1 -0
+  short, they want as many features supported as possible. And some more.

Avoid non-information:
%s/And some more.//

Quoted 12 lines
doc/develop/designprinciples.rst new file +12 -0
+* The engineer who ports U-Boot to a new board and the board maintainer want
+  U-Boot to be as simple as possible so porting it to and maintaining it on
+  their hardware is easy for them.
+* Make it easy to test. Add debug code (but don't re-invent the wheel - use
+  existing macros like debug() or debugX()).
+
+Please always keep in mind that U-Boot tries to meet all these
+different requirements.
+
+Keep it Maintainable
+^^^^^^^^^^^^^^^^^^^^
+

doc/develop/designprinciples.rst line 171

Quoted 10 lines
doc/develop/designprinciples.rst new file +10 -0
+* Avoid ``#ifdefs`` where possible
+* Use "weak" functions
+* Always follow the :doc:`codingstyle` requirements.
+
+Keep it Beautiful
+^^^^^^^^^^^^^^^^^
+
+* Keep the source code clean: strictly follow the :doc:`codingstyle`,
+  keep lists (target names in the Makefiles, board names, etc.)
+  alphabetically sorted, etc.

%s/$/\n/

Best regards

Heinrich

Quoted 38 lines
doc/develop/designprinciples.rst new file +26 -0
+* Keep U-Boot console output clean: output only really necessary information,
+  be terse but precise, keep output vertically aligned, do not use control
+  character sequences (e.g. backspaces or \\r to do "spinning wheel" activity
+  indicators), etc.
+
+Keep it Open
+^^^^^^^^^^^^
+
+Contribute your work back to the whole community. Submit your changes
+and extensions as patches to the U-Boot mailing list.
+
+Lemmas from the golden rules
+----------------------------
+
+Generic Code is Good Code
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+New code shall be as generic as possible and added to the U-Boot
+abstraction hierarchy as high as possible. As few code as possible shall be
+added in board directories as people usually do not expect re-usable code
+there.  Thus peripheral drivers should be put below
+"drivers" even if they start out supporting only one specific
+configuration.  Note that it is not a requirement for such a first
+instance to be generic as genericity generally cannot be extrapolated
+from a single data point.
+
doc/develop/index.rst +1 -0
index dde47994c71a..c0f4f0ba413a 100644
@@ -10,6 +10,7 @@ General
     :maxdepth: 1
 
     codingstyle
+   designprinciples
 
  Implementation
  --------------
author
#11 lore raw

Re: [PATCH 2/4] doc: Migrate DesignPrinciples wiki page to sphinx

Quoted 35 lines · Heinrich Schuchardt
Quoted 34 lines · Tom Rini

Move the current DesignPrinciples wiki page to doc/develop/designprinciples.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/designprinciples.rst | 197 +++++++++++++++++++++++++++++++
  doc/develop/index.rst            |   1 +
  2 files changed, 198 insertions(+)

create mode 100644 doc/develop/designprinciples.rst

doc/develop/designprinciples.rst new file +16 -0
new file mode 100644
index 000000000000..79694db77604
@@ -0,0 +1,197 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Design Principles
+========================
+
+The 10 Golden Rules of U-Boot design
+------------------------------------
+
+Keep it Small
+^^^^^^^^^^^^^
+
+U-Boot is a Boot Loader, i.e. its primary purpose in the shipping
+system is to load some operating system.
+That means that U-Boot is
+necessary to perform a certain task, but it's nothing you want to
+throw any significant resources at. Typically U-Boot is stored in
Quoted 8 lines

doc/develop/designprinciples.rst line 22

Quoted 6 lines
doc/develop/designprinciples.rst new file +6 -0
+relatively small NOR flash memory, which is expensive
+compared to the much larger NAND devices often used to store the
+operating system and the application.
+
+At the moment, U-Boot supports boards with just 128 !KiB ROM or with
+256 !KiB NOR flash. We should not easily ignore such configurations -

%s/!KiB/KiB/g

I fixed that in a follow-up.

Quoted 1 line

Are these numbers still true? U-Boot typically is larger than 512 KiB.

More true than not still, yes. And then very much so something to keep in mind for SPL. It's more true that NOR isn't common than less than 512KiB isn't true.

[snip]

Quoted 10 lines

doc/develop/designprinciples.rst line 65

Quoted 5 lines
doc/develop/designprinciples.rst new file +5 -0
+Keep it Simple
+^^^^^^^^^^^^^^
+
+U-Boot is a boot loader, but it is also a tool used for board
+bring-up, for production testing, and for other activities

%/$/./

I cannot see how this sentence is related to the heading. The sentence is repeated below.

It's also verbatim what the original page says. It's repetition for emphasis.

Signature · 1 line
Tom
author
#12 lore raw

PATCH 3/4 doc: codingstyle: Remove comment about '//' style comments

In reply to Tom Rini

For some time now we've allowed for '//' style comments, which mirrors the Linux kernel. So drop this point here.

---
 doc/develop/codingstyle.rst | 5 -----
 1 file changed, 5 deletions(-)
doc/develop/codingstyle.rst +0 -5
index a41aed2764fb..bdf1efc6019a 100644
@@ -29,11 +29,6 @@ The following rules apply:
   careful consideration, be exempted from these rules. For such files, the
   original coding style may be kept to ease subsequent migration to newer
   versions of those sources.
-* Please note that U-Boot is implemented in C (and to some small parts in
-  Assembler); no C++ is used, so please do not use C++ style comments (//) in
-  your code.
-
-  * The sole exception here is for SPDX tags in some files (checkpatch.pl will warn you).
 
 * Please also stick to the following formatting rules:
 
Signature · 1 line
2.25.1
Reviewed-by on v1 3/4
#13 lore raw

Re: [PATCH 3/4] doc: codingstyle: Remove comment about '//' style comments

Quoted 8 lines · Tom Rini

For some time now we've allowed for '//' style comments, which mirrors the Linux kernel. So drop this point here.

---
 doc/develop/codingstyle.rst | 5 -----
 1 file changed, 5 deletions(-)

Oh I didn't know that.

Acked-by on v1 3/4
#14 lore raw

Re: [PATCH 3/4] doc: codingstyle: Remove comment about '//' style comments

In reply to Tom Rini
Quoted 14 lines · Tom Rini

For some time now we've allowed for '//' style comments, which mirrors the Linux kernel. So drop this point here.

---
  doc/develop/codingstyle.rst | 5 -----
  1 file changed, 5 deletions(-)
doc/develop/codingstyle.rst +0 -0
index a41aed2764fb..bdf1efc6019a 100644
@@ -29,11 +29,6 @@ The following rules apply:
    careful consideration, be exempted from these rules. For such files, the

doc/develop/codingstyle.rst The following rules apply: · line 34

Quoted 10 lines
doc/develop/codingstyle.rst +0 -5
    original coding style may be kept to ease subsequent migration to newer
    versions of those sources.
-* Please note that U-Boot is implemented in C (and to some small parts in
-  Assembler); no C++ is used, so please do not use C++ style comments (//) in
-  your code.
-
-  * The sole exception here is for SPDX tags in some files (checkpatch.pl will warn you).
 
  * Please also stick to the following formatting rules:
 
author
#15 lore raw

PATCH 4/4 doc: Migrate Process wiki page to sphinx

In reply to Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
 doc/develop/index.rst   |   1 +
 doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 183 insertions(+)
 create mode 100644 doc/develop/process.rst
doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
    codingstyle
    designprinciples
+   process
 
 Implementation
 --------------
doc/develop/process.rst new file +182 -0

182 lines not on this page · raw message

Signature · 1 line
2.25.1
Reviewed-by on v1 4/4
#16 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

Quoted 11 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
 doc/develop/index.rst   |   1 +
 doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 183 insertions(+)
 create mode 100644 doc/develop/process.rst
#17 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

In reply to Tom Rini

Hi Tom,

Quoted 93 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/index.rst   |   1 +
  doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 183 insertions(+)

create mode 100644 doc/develop/process.rst

doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
     codingstyle
     designprinciples
+   process
 
  Implementation
  --------------
doc/develop/process.rst new file +64 -0
new file mode 100644
index 000000000000..dd279fb9eff1
@@ -0,0 +1,182 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Development Process
+==========================
+
+Management Summary
+------------------
+
+* Development happens in Release Cycles of 3 months.
+* The first 2 weeks are called Merge Window, which is followed by a
+  Stabilization Period.
+* Patches with new code get only accepted while the Merge Window is open.
+* A patch that is generally in good shape and that was submitted while the
+  Merge Window was open is eligible to go into the upcoming release, even if
+  changes and resubmits are needed.
+* During the Stabilization Period, only patches that contain bug fixes get
+  applied.
+
+Phases of the Development Process
+---------------------------------
+
+U-Boot development takes place in `Release Cycles
+<https://www.denx.de/wiki/U-Boot/ReleaseCycle>`_.  A Release Cycle lasts
+normally for three months.
+
+The first two weeks of each Release Cycle are called *Merge Window*.
+
+It is followed by a *Stabilization Period*.
+
+The end of a Release Cycle is marked by the release of a new U-Boot version.
+
+Merge Window
+------------
+
+The Merge Window is the period when new patches get submitted
+(and hopefully accepted) for inclusion into U-Boot mainline.
+
+This is the only time when new code (like support for new processors or new
+boards, or other new features or reorganization of code) is accepted.
+
+Twilight Time
+-------------
+
+Usually patches do not get accepted as they are - the peer review that takes
+place will usually require changes and resubmits of the patches before they
+are considered to be ripe for inclusion into mainline.
+
+Also, the review often happens not immediately after a patch was submitted,
+but only when somebody (usually the responsible custodian) finds time to do
+this.
+
+In the result, the final version of such patches gets submitted after the
+merge window has been closed.
+
+It is current practice in U-Boot that such patches are eligible to go into the
+upcoming release.
+
+In the result, the release of the ``"-rc1"`` version does not immediately follow
+the closing of the Merge Window.
+
+Stabilization Period
+--------------------
+
+During the Stabilization Period only patches containing bug fixes get

doc/develop/process.rst line 74

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+applied.
+
+Corner Cases
+------------
+
+Sometimes it is not clear if a patch contains a bug fix or not.
+For example, changes that remove dead code, unused macros etc. or
+that contain Coding Style fixes are not strict bug fixes.
+
+In such situations it is up to the responsible custodian to decide if he

he applies -> they apply

doc/develop/process.rst line 80

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+applies such patches even when the Merge Window is closed.
+
+Exception: at the end of the Stabilization Period only strict bug
+fixes my be applied.
+
+Sometimes patches miss the the Merge Window slightly - say by few

the the -> the

Quoted 18 lines
doc/develop/process.rst new file +18 -0
+hours or even a day. Patch acceptance is not as critical as a
+financial transaction, or such. So if there is such a slight delay,
+the custodian is free to turn a blind eye and accept it anyway. The
+idea of the development process is to make it foreseeable,
+but not to slow down development.
+
+It makes more sense if an engineer spends another day on testing and
+cleanup and submits the patch a couple of hours late, instead of
+submitting a green patch which will waste efforts from several people
+during several rounds of review and reposts.
+
+Differences to Linux Development Process
+----------------------------------------
+
+* In Linux, top-level maintainers will collect patches in their trees and send
+  pull requests to Linus as soon as the merge window opens.
+  So far, most U-Boot custodians do not work like that; they send pull requests
+  only at (or even after) the end of the merge window.

doc/develop/process.rst line 108

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+* In Linux, the closing of the merge window is marked by the release of the
+  next ``"-rc1"``
+  In U-Boot, ``"-rc1"`` will only be released after all (or at least most of
+  the) patches that were submitted during the merge window have been applied.
+
+Custodians
+----------
+
+The Custodians take responsibility for some area of the U-Boot code.  The
+in-tree ``MAINTAINERS`` files list who is reponsible for which areas.

reponsible -> responsible

Quoted 53 lines
doc/develop/process.rst new file +53 -0
+
+It is their responsibility to pick up patches from the mailing list
+that fall into their responsibility, and to process these.
+
+A very important responsibility of each custodian is to provide
+feedback to the submitter of a patch about what is going on: if the
+patch was accepted, or if it was rejected (which exact list of
+reasons), if it needs to be reworked (with respective review
+comments). Even a "I have no time now, will look into it later"
+message is better than nothing. Also, if there are remarks to a
+patch, these should leave no doubt if they were just comments and the
+patch will be accepted anyway, or if the patch should be
+reworked/resubmitted, or if it was rejected.
+
+Work flow of a Custodian
+------------------------
+
+The normal flow of work in the U-Boot development process will look
+like this:
+
+#. A developer submits a patch via e-mail to the u-boot-users mailing list.
+   U-Boot has adopted the `Linux kernel signoff policy <https://groups.google.com/g/fa.linux.kernel/c/TLJIJVA-I6o?pli=1>`_, so the submitter must
+   include a ``Signed-off-by:`` line.
+#. Everybody who can is invited to review and test the changes.  Reviews should
+   reply on the mailing list with ``Acked-by`` lines.
+#. The responsible custodian
+
+   #. inspects this patch, especially for:
+
+   #. :doc:`codingstyle`
+   #. Basic logic:
+
+      * The patch fixes a real problem.
+      * The patch does not introduce new problems, especially it does not break
+        other boards or architectures
+
+   #. U-Boot Philosophy
+   #. Applies cleanly to the source tree
+   #. passes a ``MAKEALL`` compile test without creating new warnings
+
+#. Notes:
+
+  #. In some cases more than one custodian may be affected or feel responsible.
+     To avoid duplicated efforts, the custodian who starts processing the
+     patch should send a short ACK to the mailing list.
+  #. We should create some tool to automatically do this.
+  #. This is well documented in :doc:`designprinciples`.
+  #. The custodian decides himself how recent the code must be.  It is
+     acceptable to request patches against the last officially released
+     version of U-Boot or newer.  Of course a custodian can also accept
+     patches against older code.
+  #. Commits should show original author in the ``author`` field and include all
+      sign off/ack lines.

doc/develop/process.rst line 171

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+
+5. The custodian decides to accept or to reject the patch.
+#. If accepted, the custodian adds the patch to his public git repository and
+   notifies the mailing list. This note should include:
+
+   * a short description of the changes
+   * the list of the affected boards / architectures etc.
+   * suggested tests
+
+   Although the custodian is supposed to perform his own tests

his -> their

doc/develop/process.rst line 172

Quoted 1 line
doc/develop/process.rst new file +1 -0
+   it is a well-known and accepted fact that he needs help from

he -> they

doc/develop/process.rst line 178

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+   other developers who - for example - have access to the required
+   hardware or tool chains.
+   The custodian request help for tests and feedback from
+   specific maintainers and U-Boot users.
+#. Once tests are passed, some agreed time limit expires, the custodian
+   requests that the changes in his public git repository be merged into the

his -> their

doc/develop/process.rst line 179

Quoted 1 line
doc/develop/process.rst new file +1 -0
+   main tree. If necessary, the custodian may have to adapt his changes to

his -> their

doc/develop/process.rst line 181

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+   allow for a clean merge.
+   Todo: define a reasonable time limit. 3 weeks?

regards,
Claudius

#18 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

Martin

Quoted 90 lines · Claudius Heine

Hi Tom,

Quoted 31 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/index.rst   |   1 +
  doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 183 insertions(+)

create mode 100644 doc/develop/process.rst

doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
     codingstyle
     designprinciples
+   process
 
  Implementation
  --------------
doc/develop/process.rst new file +2 -0
new file mode 100644
index 000000000000..dd279fb9eff1
@@ -0,0 +1,182 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+

doc/develop/process.rst line 12

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+U-Boot Development Process
+==========================
+
+Management Summary
+------------------
+
+* Development happens in Release Cycles of 3 months.
+* The first 2 weeks are called Merge Window, which is followed by a
+  Stabilization Period.
+* Patches with new code get only accepted while the Merge Window is

open.

doc/develop/process.rst line 13

Quoted 1 line
doc/develop/process.rst new file +1 -0
+* A patch that is generally in good shape and that was submitted while

the

doc/develop/process.rst line 14

Quoted 1 line
doc/develop/process.rst new file +1 -0
+  Merge Window was open is eligible to go into the upcoming release,

even if

doc/develop/process.rst line 16

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+  changes and resubmits are needed.
+* During the Stabilization Period, only patches that contain bug fixes

get

doc/develop/process.rst

Quoted 7 lines
doc/develop/process.rst new file +7 -0
+  applied.
+
+Phases of the Development Process
+---------------------------------
+
+U-Boot development takes place in `Release Cycles
+<https://www.denx.de/wiki/U-Boot/ReleaseCycle>`_.  A Release Cycle

lasts

doc/develop/process.rst

Quoted 7 lines
doc/develop/process.rst new file +7 -0
+normally for three months.
+
+The first two weeks of each Release Cycle are called *Merge Window*.
+
+It is followed by a *Stabilization Period*.
+
+The end of a Release Cycle is marked by the release of a new U-Boot

version.

doc/develop/process.rst

Quoted 8 lines
doc/develop/process.rst new file +8 -0
+
+Merge Window
+------------
+
+The Merge Window is the period when new patches get submitted
+(and hopefully accepted) for inclusion into U-Boot mainline.
+
+This is the only time when new code (like support for new processors or

new

doc/develop/process.rst

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+boards, or other new features or reorganization of code) is accepted.
+
+Twilight Time
+-------------
+
+Usually patches do not get accepted as they are - the peer review that

takes

doc/develop/process.rst line 45

Quoted 1 line
doc/develop/process.rst new file +1 -0
+place will usually require changes and resubmits of the patches before

they

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+are considered to be ripe for inclusion into mainline.
+
+Also, the review often happens not immediately after a patch was

submitted,

Quoted 7 lines

doc/develop/process.rst line 49

Quoted 1 line
doc/develop/process.rst new file +1 -0
+but only when somebody (usually the responsible custodian) finds time

to do

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+this.
+
+In the result, the final version of such patches gets submitted after

the

Should be: "The result is that the final version..." or "This can mean the final version..."

Quoted 9 lines

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+merge window has been closed.
+
+It is current practice in U-Boot that such patches are eligible to go

into the

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+upcoming release.
+
+In the result, the release of the ``"-rc1"`` version does not

immediately follow

Should be "The result is that the release..." or "Thus the release..."

The first of both my two choices is closer to the original wording, the second feels to me (as a British English speaker) to be more idiomatic. (Beware, idiomatic English is not necessarily good - not everyone here is a native speaker, and it can be overly complex.)

Quoted 165 lines
Quoted 6 lines
doc/develop/process.rst new file +6 -0
+the closing of the Merge Window.
+
+Stabilization Period
+--------------------
+
+During the Stabilization Period only patches containing bug fixes get

doc/develop/process.rst line 74

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+applied.
+
+Corner Cases
+------------
+
+Sometimes it is not clear if a patch contains a bug fix or not.
+For example, changes that remove dead code, unused macros etc. or
+that contain Coding Style fixes are not strict bug fixes.
+
+In such situations it is up to the responsible custodian to decide if he

he applies -> they apply

doc/develop/process.rst line 80

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+applies such patches even when the Merge Window is closed.
+
+Exception: at the end of the Stabilization Period only strict bug
+fixes my be applied.
+
+Sometimes patches miss the the Merge Window slightly - say by few

the the -> the

Quoted 5 lines
doc/develop/process.rst new file +5 -0
+hours or even a day. Patch acceptance is not as critical as a
+financial transaction, or such. So if there is such a slight delay,
+the custodian is free to turn a blind eye and accept it anyway. The
+idea of the development process is to make it foreseeable,
+but not to slow down development.

doc/develop/process.rst

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+
+It makes more sense if an engineer spends another day on testing and
+cleanup and submits the patch a couple of hours late, instead of
+submitting a green patch which will waste efforts from several people
+during several rounds of review and reposts.
+
+Differences to Linux Development Process
+----------------------------------------
+
+* In Linux, top-level maintainers will collect patches in their trees

and send

doc/develop/process.rst line 97

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+  pull requests to Linus as soon as the merge window opens.
+  So far, most U-Boot custodians do not work like that; they send pull

requests

doc/develop/process.rst line 99

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+  only at (or even after) the end of the merge window.
+* In Linux, the closing of the merge window is marked by the release of

the

doc/develop/process.rst line 101

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+  next ``"-rc1"``
+  In U-Boot, ``"-rc1"`` will only be released after all (or at least

most of

doc/develop/process.rst line 102

Quoted 1 line
doc/develop/process.rst new file +1 -0
+  the) patches that were submitted during the merge window have been

applied.

doc/develop/process.rst

Quoted 5 lines
doc/develop/process.rst new file +5 -0
+
+Custodians
+----------
+
+The Custodians take responsibility for some area of the U-Boot code.

The

doc/develop/process.rst line 108

Quoted 1 line
doc/develop/process.rst new file +1 -0
+in-tree ``MAINTAINERS`` files list who is reponsible for which areas.

reponsible -> responsible

Quoted 11 lines
doc/develop/process.rst new file +11 -0
+
+It is their responsibility to pick up patches from the mailing list
+that fall into their responsibility, and to process these.
+
+A very important responsibility of each custodian is to provide
+feedback to the submitter of a patch about what is going on: if the
+patch was accepted, or if it was rejected (which exact list of
+reasons), if it needs to be reworked (with respective review
+comments). Even a "I have no time now, will look into it later"
+message is better than nothing. Also, if there are remarks to a
+patch, these should leave no doubt if they were just comments and the

doc/develop/process.rst

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+patch will be accepted anyway, or if the patch should be
+reworked/resubmitted, or if it was rejected.
+
+Work flow of a Custodian
+------------------------
+
+The normal flow of work in the U-Boot development process will look
+like this:
+
+#. A developer submits a patch via e-mail to the u-boot-users mailing

list.

doc/develop/process.rst line 130

Quoted 1 line
doc/develop/process.rst new file +1 -0
+   U-Boot has adopted the `Linux kernel signoff policy <

https://groups.google.com/g/fa.linux.kernel/c/TLJIJVA-I6o?pli=1>`_, so the submitter must

doc/develop/process.rst line 132

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+   include a ``Signed-off-by:`` line.
+#. Everybody who can is invited to review and test the changes.

Reviews should

doc/develop/process.rst

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+   reply on the mailing list with ``Acked-by`` lines.
+#. The responsible custodian
+
+   #. inspects this patch, especially for:
+
+   #. :doc:`codingstyle`
+   #. Basic logic:
+
+      * The patch fixes a real problem.
+      * The patch does not introduce new problems, especially it does

not break

doc/develop/process.rst

Quoted 9 lines
doc/develop/process.rst new file +9 -0
+        other boards or architectures
+
+   #. U-Boot Philosophy
+   #. Applies cleanly to the source tree
+   #. passes a ``MAKEALL`` compile test without creating new warnings
+
+#. Notes:
+
+  #. In some cases more than one custodian may be affected or feel

responsible.

doc/develop/process.rst line 152

Quoted 1 line
doc/develop/process.rst new file +1 -0
+     To avoid duplicated efforts, the custodian who starts processing

the

doc/develop/process.rst

Quoted 8 lines
doc/develop/process.rst new file +8 -0
+     patch should send a short ACK to the mailing list.
+  #. We should create some tool to automatically do this.
+  #. This is well documented in :doc:`designprinciples`.
+  #. The custodian decides himself how recent the code must be.  It is
+     acceptable to request patches against the last officially released
+     version of U-Boot or newer.  Of course a custodian can also accept
+     patches against older code.
+  #. Commits should show original author in the ``author`` field and

include all

doc/develop/process.rst

Quoted 4 lines
doc/develop/process.rst new file +4 -0
+      sign off/ack lines.
+
+5. The custodian decides to accept or to reject the patch.
+#. If accepted, the custodian adds the patch to his public git

repository and

doc/develop/process.rst line 171

Quoted 7 lines
doc/develop/process.rst new file +7 -0
+   notifies the mailing list. This note should include:
+
+   * a short description of the changes
+   * the list of the affected boards / architectures etc.
+   * suggested tests
+
+   Although the custodian is supposed to perform his own tests

his -> their

doc/develop/process.rst line 172

Quoted 1 line
doc/develop/process.rst new file +1 -0
+   it is a well-known and accepted fact that he needs help from

he -> they

doc/develop/process.rst

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+   other developers who - for example - have access to the required
+   hardware or tool chains.
+   The custodian request help for tests and feedback from
+   specific maintainers and U-Boot users.
+#. Once tests are passed, some agreed time limit expires, the custodian
+   requests that the changes in his public git repository be merged

into the

his -> their

doc/develop/process.rst line 179

Quoted 1 line
doc/develop/process.rst new file +1 -0
+   main tree. If necessary, the custodian may have to adapt his changes

to

his -> their

doc/develop/process.rst line 181

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+   allow for a clean merge.
+   Todo: define a reasonable time limit. 3 weeks?

regards,
Claudius

author
#19 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

Quoted 115 lines · Martin Bonner

Martin

Quoted 90 lines · Claudius Heine

Hi Tom,

Quoted 31 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/index.rst   |   1 +
  doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 183 insertions(+)

create mode 100644 doc/develop/process.rst

doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
     codingstyle
     designprinciples
+   process
 
  Implementation
  --------------
doc/develop/process.rst new file +2 -0
new file mode 100644
index 000000000000..dd279fb9eff1
@@ -0,0 +1,182 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+

doc/develop/process.rst line 12

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+U-Boot Development Process
+==========================
+
+Management Summary
+------------------
+
+* Development happens in Release Cycles of 3 months.
+* The first 2 weeks are called Merge Window, which is followed by a
+  Stabilization Period.
+* Patches with new code get only accepted while the Merge Window is

open.

doc/develop/process.rst line 13

Quoted 1 line
doc/develop/process.rst new file +1 -0
+* A patch that is generally in good shape and that was submitted while

the

doc/develop/process.rst line 14

Quoted 1 line
doc/develop/process.rst new file +1 -0
+  Merge Window was open is eligible to go into the upcoming release,

even if

doc/develop/process.rst line 16

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+  changes and resubmits are needed.
+* During the Stabilization Period, only patches that contain bug fixes

get

doc/develop/process.rst

Quoted 7 lines
doc/develop/process.rst new file +7 -0
+  applied.
+
+Phases of the Development Process
+---------------------------------
+
+U-Boot development takes place in `Release Cycles
+<https://www.denx.de/wiki/U-Boot/ReleaseCycle>`_.  A Release Cycle

lasts

doc/develop/process.rst

Quoted 7 lines
doc/develop/process.rst new file +7 -0
+normally for three months.
+
+The first two weeks of each Release Cycle are called *Merge Window*.
+
+It is followed by a *Stabilization Period*.
+
+The end of a Release Cycle is marked by the release of a new U-Boot

version.

doc/develop/process.rst

Quoted 8 lines
doc/develop/process.rst new file +8 -0
+
+Merge Window
+------------
+
+The Merge Window is the period when new patches get submitted
+(and hopefully accepted) for inclusion into U-Boot mainline.
+
+This is the only time when new code (like support for new processors or

new

doc/develop/process.rst

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+boards, or other new features or reorganization of code) is accepted.
+
+Twilight Time
+-------------
+
+Usually patches do not get accepted as they are - the peer review that

takes

doc/develop/process.rst line 45

Quoted 1 line
doc/develop/process.rst new file +1 -0
+place will usually require changes and resubmits of the patches before

they

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+are considered to be ripe for inclusion into mainline.
+
+Also, the review often happens not immediately after a patch was

submitted,

Quoted 7 lines

doc/develop/process.rst line 49

Quoted 1 line
doc/develop/process.rst new file +1 -0
+but only when somebody (usually the responsible custodian) finds time

to do

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+this.
+
+In the result, the final version of such patches gets submitted after

the

Should be: "The result is that the final version..." or "This can mean the final version..."

Quoted 9 lines

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+merge window has been closed.
+
+It is current practice in U-Boot that such patches are eligible to go

into the

doc/develop/process.rst

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+upcoming release.
+
+In the result, the release of the ``"-rc1"`` version does not

immediately follow

Quoted 6 lines

Should be "The result is that the release..." or "Thus the release..."

The first of both my two choices is closer to the original wording, the second feels to me (as a British English speaker) to be more idiomatic. (Beware, idiomatic English is not necessarily good - not everyone here is a native speaker, and it can be overly complex.)

Thanks for the feedback. I suspect that Wolfgang wrote these pages initially. I'll cc you both on patches to adjust the wording slightly. I'm doing the read-aloud test on these sections now.

Signature · 1 line
Tom
#20 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

In reply to Tom Rini
Quoted 29 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/index.rst   |   1 +
  doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 183 insertions(+)

create mode 100644 doc/develop/process.rst

doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
     codingstyle
     designprinciples
+   process
 
  Implementation
  --------------
doc/develop/process.rst new file +0 -0
new file mode 100644
index 000000000000..dd279fb9eff1

doc/develop/process.rst line 9

Quoted 9 lines
doc/develop/process.rst new file +9 -0
@@ -0,0 +1,182 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Development Process
+==========================
+
+Management Summary
+------------------
+
+* Development happens in Release Cycles of 3 months.

Do we need all this capitalization?

doc/develop/process.rst line 11

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+* The first 2 weeks are called Merge Window, which is followed by a
+  Stabilization Period.

Please, separate bullets by blank lines.

Quoted 9 lines
doc/develop/process.rst new file +9 -0
+* Patches with new code get only accepted while the Merge Window is open.
+* A patch that is generally in good shape and that was submitted while the
+  Merge Window was open is eligible to go into the upcoming release, even if
+  changes and resubmits are needed.
+* During the Stabilization Period, only patches that contain bug fixes get
+  applied.
+
+Phases of the Development Process
+---------------------------------

doc/develop/process.rst line 30

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+
+U-Boot development takes place in `Release Cycles
+<https://www.denx.de/wiki/U-Boot/ReleaseCycle>`_.  A Release Cycle lasts
+normally for three months.
+
+The first two weeks of each Release Cycle are called *Merge Window*.
+
+It is followed by a *Stabilization Period*.
+
+The end of a Release Cycle is marked by the release of a new U-Boot version.

Don't repeat yourself.

Quoted 53 lines
doc/develop/process.rst new file +53 -0
+
+Merge Window
+------------
+
+The Merge Window is the period when new patches get submitted
+(and hopefully accepted) for inclusion into U-Boot mainline.
+
+This is the only time when new code (like support for new processors or new
+boards, or other new features or reorganization of code) is accepted.
+
+Twilight Time
+-------------
+
+Usually patches do not get accepted as they are - the peer review that takes
+place will usually require changes and resubmits of the patches before they
+are considered to be ripe for inclusion into mainline.
+
+Also, the review often happens not immediately after a patch was submitted,
+but only when somebody (usually the responsible custodian) finds time to do
+this.
+
+In the result, the final version of such patches gets submitted after the
+merge window has been closed.
+
+It is current practice in U-Boot that such patches are eligible to go into the
+upcoming release.
+
+In the result, the release of the ``"-rc1"`` version does not immediately follow
+the closing of the Merge Window.
+
+Stabilization Period
+--------------------
+
+During the Stabilization Period only patches containing bug fixes get
+applied.
+
+Corner Cases
+------------
+
+Sometimes it is not clear if a patch contains a bug fix or not.
+For example, changes that remove dead code, unused macros etc. or
+that contain Coding Style fixes are not strict bug fixes.
+
+In such situations it is up to the responsible custodian to decide if he
+applies such patches even when the Merge Window is closed.
+
+Exception: at the end of the Stabilization Period only strict bug
+fixes my be applied.
+
+Sometimes patches miss the the Merge Window slightly - say by few
+hours or even a day. Patch acceptance is not as critical as a
+financial transaction, or such. So if there is such a slight delay,
+the custodian is free to turn a blind eye and accept it anyway. The

doc/develop/process.rst line 93

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+idea of the development process is to make it foreseeable,
+but not to slow down development.
+
+It makes more sense if an engineer spends another day on testing and
+cleanup and submits the patch a couple of hours late, instead of
+submitting a green patch which will waste efforts from several people
+during several rounds of review and reposts.
+
+Differences to Linux Development Process
+----------------------------------------

%s/to/to the/

doc/develop/process.rst line 98

Quoted 5 lines
doc/develop/process.rst new file +5 -0
+
+* In Linux, top-level maintainers will collect patches in their trees and send
+  pull requests to Linus as soon as the merge window opens.
+  So far, most U-Boot custodians do not work like that; they send pull requests
+  only at (or even after) the end of the merge window.

%s/$/\n/

doc/develop/process.rst line 108

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+* In Linux, the closing of the merge window is marked by the release of the
+  next ``"-rc1"``
+  In U-Boot, ``"-rc1"`` will only be released after all (or at least most of
+  the) patches that were submitted during the merge window have been applied.
+
+Custodians
+----------
+
+The Custodians take responsibility for some area of the U-Boot code.  The
+in-tree ``MAINTAINERS`` files list who is reponsible for which areas.

%/reponsible/responsible/

Quoted 13 lines
doc/develop/process.rst new file +13 -0
+
+It is their responsibility to pick up patches from the mailing list
+that fall into their responsibility, and to process these.
+
+A very important responsibility of each custodian is to provide
+feedback to the submitter of a patch about what is going on: if the
+patch was accepted, or if it was rejected (which exact list of
+reasons), if it needs to be reworked (with respective review
+comments). Even a "I have no time now, will look into it later"
+message is better than nothing. Also, if there are remarks to a
+patch, these should leave no doubt if they were just comments and the
+patch will be accepted anyway, or if the patch should be
+reworked/resubmitted, or if it was rejected.

doc/develop/process.rst line 131

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+
+Work flow of a Custodian
+------------------------
+
+The normal flow of work in the U-Boot development process will look
+like this:
+
+#. A developer submits a patch via e-mail to the u-boot-users mailing list.
+   U-Boot has adopted the `Linux kernel signoff policy <https://groups.google.com/g/fa.linux.kernel/c/TLJIJVA-I6o?pli=1>`_, so the submitter must
+   include a ``Signed-off-by:`` line.

Keep lines at 80 characters.

doc/develop/process.rst line 133

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+#. Everybody who can is invited to review and test the changes.  Reviews should
+   reply on the mailing list with ``Acked-by`` lines.

%s/Acked-by/Reviewed-by/ ?

Please, refer to
https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html
for the usage of Reviewed-by and Acked-by.

doc/develop/process.rst line 136

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+#. The responsible custodian
+
+   #. inspects this patch, especially for:

This should not be a bullet but go into the line above.

Quoted 17 lines
doc/develop/process.rst new file +17 -0
+
+   #. :doc:`codingstyle`
+   #. Basic logic:
+
+      * The patch fixes a real problem.
+      * The patch does not introduce new problems, especially it does not break
+        other boards or architectures
+
+   #. U-Boot Philosophy
+   #. Applies cleanly to the source tree
+   #. passes a ``MAKEALL`` compile test without creating new warnings
+
+#. Notes:
+
+  #. In some cases more than one custodian may be affected or feel responsible.
+     To avoid duplicated efforts, the custodian who starts processing the
+     patch should send a short ACK to the mailing list.

doc/develop/process.rst line 163

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+  #. We should create some tool to automatically do this.
+  #. This is well documented in :doc:`designprinciples`.
+  #. The custodian decides himself how recent the code must be.  It is
+     acceptable to request patches against the last officially released
+     version of U-Boot or newer.  Of course a custodian can also accept
+     patches against older code.
+  #. Commits should show original author in the ``author`` field and include all
+      sign off/ack lines.
+
+5. The custodian decides to accept or to reject the patch.

Don't mix # bullets and numbers.

Quoted 4 lines
doc/develop/process.rst new file +4 -0
+#. If accepted, the custodian adds the patch to his public git repository and
+   notifies the mailing list. This note should include:
+
+   * a short description of the changes

doc/develop/process.rst line 177

Quoted 10 lines
doc/develop/process.rst new file +10 -0
+   * the list of the affected boards / architectures etc.
+   * suggested tests
+
+   Although the custodian is supposed to perform his own tests
+   it is a well-known and accepted fact that he needs help from
+   other developers who - for example - have access to the required
+   hardware or tool chains.
+   The custodian request help for tests and feedback from
+   specific maintainers and U-Boot users.
+#. Once tests are passed, some agreed time limit expires, the custodian

No clue what agreed time limit you are referring to.

The custodian will create a merge request when the merge window matching the type of the patch (feature or bug) is open.

doc/develop/process.rst line 181

Quoted 4 lines
doc/develop/process.rst new file +4 -0
+   requests that the changes in his public git repository be merged into the
+   main tree. If necessary, the custodian may have to adapt his changes to
+   allow for a clean merge.
+   Todo: define a reasonable time limit. 3 weeks?

This todo-line is not helpful. If the patch contains a new feature, the custodian has to wait for the next merge window before issuing a pull request for it.

doc/develop/process.rst line 182

Quoted 1 line
doc/develop/process.rst new file +1 -0
+

Please, avoid empty lines at the end of file.

Best regards

Heinrich

author
#21 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

Quoted 33 lines · Heinrich Schuchardt
Quoted 32 lines · Tom Rini

Move the current Process wiki page to doc/develop/process.rst. The changes here are for formatting or slight rewording so that it reads well when linking to other sphinx documents.

---
  doc/develop/index.rst   |   1 +
  doc/develop/process.rst | 182 ++++++++++++++++++++++++++++++++++++++++
  2 files changed, 183 insertions(+)

create mode 100644 doc/develop/process.rst

doc/develop/index.rst +1 -0
index c0f4f0ba413a..eab00a55382a 100644
@@ -11,6 +11,7 @@ General
 
     codingstyle
     designprinciples
+   process
 
  Implementation
  --------------
doc/develop/process.rst new file +3 -0
new file mode 100644
index 000000000000..dd279fb9eff1
@@ -0,0 +1,182 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+U-Boot Development Process
Quoted 8 lines

doc/develop/process.rst line 9

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+==========================
+
+Management Summary
+------------------
+
+* Development happens in Release Cycles of 3 months.

Do we need all this capitalization?

It's for emphasis I believe.

Quoted 9 lines
Quoted 9 lines
doc/develop/process.rst new file +9 -0
+#. Notes:
+
+  #. In some cases more than one custodian may be affected or feel responsible.
+     To avoid duplicated efforts, the custodian who starts processing the
+     patch should send a short ACK to the mailing list.
+  #. We should create some tool to automatically do this.
+  #. This is well documented in :doc:`designprinciples`.
+  #. The custodian decides himself how recent the code must be.  It is
+     acceptable to request patches against the last officially released
Quoted 8 lines

doc/develop/process.rst line 163

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+     version of U-Boot or newer.  Of course a custodian can also accept
+     patches against older code.
+  #. Commits should show original author in the ``author`` field and include all
+      sign off/ack lines.
+
+5. The custodian decides to accept or to reject the patch.

Don't mix # bullets and numbers.

I believe I needed to for them to render in order. I guess I'll just only do the number in v2.

Signature · 1 line
Tom
author
#22 lore raw

Re: [PATCH 4/4] doc: Migrate Process wiki page to sphinx

In reply to Heinrich Schuchardt
Quoted 1 line · Heinrich Schuchardt

On 6/27/22 19:17, Tom Rini wrote:

[snip]

Quoted 6 lines
Quoted 6 lines
doc/develop/process.rst new file +6 -0
+Phases of the Development Process
+---------------------------------
+
+U-Boot development takes place in `Release Cycles
+<https://www.denx.de/wiki/U-Boot/ReleaseCycle>`_.  A Release Cycle lasts
+normally for three months.
Quoted 8 lines

doc/develop/process.rst line 30

Quoted 6 lines
doc/develop/process.rst new file +6 -0
+
+The first two weeks of each Release Cycle are called *Merge Window*.
+
+It is followed by a *Stabilization Period*.
+
+The end of a Release Cycle is marked by the release of a new U-Boot version.

Don't repeat yourself.

I'm not seeing repetition really here.

[snip]

Quoted 12 lines

doc/develop/process.rst line 131

Quoted 9 lines
doc/develop/process.rst new file +9 -0
+Work flow of a Custodian
+------------------------
+
+The normal flow of work in the U-Boot development process will look
+like this:
+
+#. A developer submits a patch via e-mail to the u-boot-users mailing list.
+   U-Boot has adopted the `Linux kernel signoff policy <https://groups.google.com/g/fa.linux.kernel/c/TLJIJVA-I6o?pli=1>`_, so the submitter must
+   include a ``Signed-off-by:`` line.

Keep lines at 80 characters.

Quoted 8 lines

doc/develop/process.rst line 133

Quoted 2 lines
doc/develop/process.rst new file +2 -0
+#. Everybody who can is invited to review and test the changes.  Reviews should
+   reply on the mailing list with ``Acked-by`` lines.

%s/Acked-by/Reviewed-by/ ?

Please, refer to
https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html
for the usage of Reviewed-by and Acked-by.

Yes, it would be good to reword this to reference the current kernel.org documentation, I'll try something.

Quoted 5 lines

doc/develop/process.rst line 136

Quoted 3 lines
doc/develop/process.rst new file +3 -0
+#. The responsible custodian
+
+   #. inspects this patch, especially for:

This should not be a bullet but go into the line above.

That would read better, yes.

[snip]

Quoted 6 lines
Quoted 1 line

+#. Once tests are passed, some agreed time limit expires, the custodian

No clue what agreed time limit you are referring to.

The custodian will create a merge request when the merge window matching the type of the patch (feature or bug) is open.

This has long been more informal rather than following a defined process, yes. I'll try and reword things a bit.

Quoted 9 lines

doc/develop/process.rst line 181

Quoted 5 lines
doc/develop/process.rst new file +4 -0
+   requests that the changes in his public git repository be merged into the
+   main tree. If necessary, the custodian may have to adapt his changes to
+   allow for a clean merge.
+   Todo: define a reasonable time limit. 3 weeks?

This todo-line is not helpful. If the patch contains a new feature, the custodian has to wait for the next merge window before issuing a pull request for it.

Signature · 1 line
Tom