Skip to contentSkip to conversation

spi: spi-cadence: Fix SPI CS gets toggling sporadically

PATCH In review Sasha Levin 4 participants 18 messages Jun 28, 2022 – Jun 30, 2022

Subsystems (6)
lore
Share & tools
lore
author maintainer
#2 lore raw

PATCH 3/13 drm/vc4: crtc: Use an union to store the page flip callback

In reply to Sasha Levin

From: Maxime Ripard <[email protected]>

[ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]

We'll need to extend the vc4_async_flip_state structure to rely on another callback implementation, so let's move the current one into a union.

---
 drivers/gpu/drm/vc4/vc4_crtc.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
drivers/gpu/drm/vc4/vc4_crtc.c +14 -6
index 51d34e7275ab..9d97f535a4d6 100644
@@ -717,17 +717,17 @@ struct vc4_async_flip_state {
 	struct drm_framebuffer *fb;
 	struct drm_pending_vblank_event *event;
 
-	struct vc4_seqno_cb cb;
+	union {
+		struct vc4_seqno_cb seqno;
+	} cb;
 };
 
 /* Called when the V3D execution for the BO being flipped to is done, so that
  * we can actually update the plane's address to point to it.
  */
 static void
-vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
+vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state)
 {
-	struct vc4_async_flip_state *flip_state =
-		container_of(cb, struct vc4_async_flip_state, cb);
 	struct drm_crtc *crtc = flip_state->crtc;
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
@@ -749,6 +749,14 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb)
 	up(&vc4->async_modeset);
 }
 
+static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb)
+{
+	struct vc4_async_flip_state *flip_state =
+		container_of(cb, struct vc4_async_flip_state, cb.seqno);
+
+	vc4_async_page_flip_complete(flip_state);
+}
+
 /* Implements async (non-vblank-synced) page flips.
  *
  * The page flip ioctl needs to return immediately, so we grab the
@@ -794,8 +802,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc,
 	drm_atomic_set_fb_for_plane(plane->state, fb);
 	plane->fb = fb;
 
-	vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno,
-			   vc4_async_page_flip_complete);
+	vc4_queue_seqno_cb(dev, &flip_state->cb.seqno, bo->seqno,
+			   vc4_async_page_flip_seqno_complete);
 
 	/* Driver takes ownership of state on successful async commit. */
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/13 video: fbdev: skeletonfb: Fix syntax errors in comments

In reply to Sasha Levin

From: Xiang wangx <[email protected]>

[ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]

Delete the redundant word 'its'.

---
 drivers/video/fbdev/skeletonfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/skeletonfb.c +1 -1
index f948baa16d82..254bb6e2187c 100644
@@ -96,7 +96,7 @@ static struct fb_fix_screeninfo xxxfb_fix = {
 
     /*
      * 	Modern graphical hardware not only supports pipelines but some 
-     *  also support multiple monitors where each display can have its  
+     *  also support multiple monitors where each display can have
      *  its own unique data. In this case each display could be  
      *  represented by a separate framebuffer device thus a separate 
      *  struct fb_info. Now the struct xxx_par represents the graphics
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 6/13 video: fbdev: intelfb: Use aperture size from pci_resource_len

In reply to Sasha Levin

From: Petr Cvek <[email protected]>

[ Upstream commit 25c9a15fb7bbfafb94dd3b4e3165c18b8e1bd039 ]

Aperture size for i9x5 variants is determined from PCI base address.

	if (pci_resource_start(pdev, 2) & 0x08000000)
		*aperture_size = MB(128);
	...

This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len().

The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter.

---
 drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/video/fbdev/intelfb/intelfbhw.c +5 -7
index d31ed4e2c46f..3aa93565e935 100644
@@ -199,13 +199,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 	case PCI_DEVICE_ID_INTEL_945GME:
 	case PCI_DEVICE_ID_INTEL_965G:
 	case PCI_DEVICE_ID_INTEL_965GM:
-		/* 915, 945 and 965 chipsets support a 256MB aperture.
-		   Aperture size is determined by inspected the
-		   base address of the aperture. */
-		if (pci_resource_start(pdev, 2) & 0x08000000)
-			*aperture_size = MB(128);
-		else
-			*aperture_size = MB(256);
+		/*
+		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+		 * aperture. Determine size from PCI resource length.
+		 */
+		*aperture_size = pci_resource_len(pdev, 2);
 		break;
 	default:
 		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 7/13 video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

In reply to Sasha Levin

From: Hyunwoo Kim <[email protected]>

[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]

In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user().

---
 drivers/video/fbdev/pxa3xx-gcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/pxa3xx-gcu.c +1 -1
index 184773b6b9e4..2cca4b763d8d 100644
@@ -391,7 +391,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff,
 	struct pxa3xx_gcu_batch	*buffer;
 	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
-	int words = count / 4;
+	size_t words = count / 4;
 
 	/* Does not need to be atomic. There's a lock in user space,
 	 * but anyhow, this is just for statistics. */
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 8/13 video: fbdev: simplefb: Check before clk_put() not needed

In reply to Sasha Levin

From: Yihao Han <[email protected]>

[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]

clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it.

---
 drivers/video/fbdev/simplefb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/video/fbdev/simplefb.c +1 -2
index 61f799a515dc..1efdbbc20f99 100644
@@ -231,8 +231,7 @@ static int simplefb_clocks_init(struct simplefb_par *par,
 		if (IS_ERR(clock)) {
 			if (PTR_ERR(clock) == -EPROBE_DEFER) {
 				while (--i >= 0) {
-					if (par->clks[i])
-						clk_put(par->clks[i]);
+					clk_put(par->clks[i]);
 				}
 				kfree(par->clks);
 				return -EPROBE_DEFER;
Signature · 1 line
2.35.1
author maintainer
#17 lore raw

PATCH 13/13 arm: mach-spear: Add missing of_node_put() in time.c

In reply to Sasha Levin

From: Liang He <[email protected]>

[ Upstream commit 2c629dd2d14fd7f64a553f809eda6d0b3a4f615a ]

In spear_setup_of_timer(), of_find_matching_node() will return a node pointer with refcount incrementd. We should use of_node_put() in each fail path or when it is not used anymore.

---
 arch/arm/mach-spear/time.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
arch/arm/mach-spear/time.c +6 -2
index aaaa6781b9fe..57b77c7effa9 100644
@@ -223,13 +223,13 @@ void __init spear_setup_of_timer(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
 		pr_err("%s: of iomap failed\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -244,6 +244,8 @@ void __init spear_setup_of_timer(void)
 		goto err_prepare_enable_clk;
 	}
 
+	of_node_put(np);
+
 	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
@@ -253,4 +255,6 @@ void __init spear_setup_of_timer(void)
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
 }
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/13 drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c

In reply to Sasha Levin

From: Wentao_Liang <[email protected]>

[ Upstream commit 8fc74d18639a2402ca52b177e990428e26ea881f ]

The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister.

4721. static void vxge_remove(struct pci_dev *pdev)
4722. {
4723. struct __vxge_hw_device *hldev;
4724. struct vxgedev *vdev;
…
4731. vdev = netdev_priv(hldev->ndev);
…
4740. vxge_device_unregister(hldev);
4741. /* Do not call pci_disable_sriov here, as it
will break child devices */
4742. vxge_hw_device_terminate(hldev);
4743. iounmap(vdev->bar0);
…
4749 vxge_debug_init(vdev->level_trace, "%s:%d
Device unregistered",
4750 __func__, __LINE__);
4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d

								Exiting...", __func__,

4752 __LINE__);
4753. }

This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN.

/***************************start**************************/

root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove
[  178.296316] vxge_remove
[  182.057081]
 ==================================================================
[  182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c
[  182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119
[  182.057983]
[  182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5
[  182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  182.059463] Call Trace:
[  182.059726]  <TASK>
[  182.060017]  dump_stack_lvl+0x34/0x44
[  182.060316]  print_report.cold+0xb2/0x6b7
[  182.060401]  ? kfree+0x89/0x290
[  182.060478]  ? vxge_remove+0xe0/0x15c
[  182.060545]  kasan_report+0xa9/0x120
[  182.060629]  ? vxge_remove+0xe0/0x15c
[  182.060706]  vxge_remove+0xe0/0x15c
[  182.060793]  pci_device_remove+0x5d/0xe0
[  182.060968]  device_release_driver_internal+0xf1/0x180
[  182.061063]  pci_stop_bus_device+0xae/0xe0
[  182.061150]  pci_stop_and_remove_bus_device_locked+0x11/0x20
[  182.061236]  remove_store+0xc6/0xe0
[  182.061297]  ? subordinate_bus_number_show+0xc0/0xc0
[  182.061359]  ? __mutex_lock_slowpath+0x10/0x10
[  182.061438]  ? sysfs_kf_write+0x6d/0xa0
[  182.061525]  kernfs_fop_write_iter+0x1b0/0x260
[  182.061610]  ? sysfs_kf_bin_read+0xf0/0xf0
[  182.061695]  new_sync_write+0x209/0x310
[  182.061789]  ? new_sync_read+0x310/0x310
[  182.061865]  ? cgroup_rstat_updated+0x5c/0x170
[  182.061937]  ? preempt_count_sub+0xf/0xb0
[  182.061995]  ? pick_next_entity+0x13a/0x220
[  182.062063]  ? __inode_security_revalidate+0x44/0x80
[  182.062155]  ? security_file_permission+0x46/0x2a0
[  182.062230]  vfs_write+0x33f/0x3e0
[  182.062303]  ksys_write+0xb4/0x150
[  182.062369]  ? __ia32_sys_read+0x40/0x40
[  182.062451]  do_syscall_64+0x3b/0x90
[  182.062531]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  182.062894] RIP: 0033:0x7f3f37d17274
[  182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f
80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[  182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246
ORIG_RAX: 0000000000000001
[  182.064117] RAX: ffffffffffffffda RBX: 0000000000000002
RCX: 00007f3f37d17274
[  182.064219] RDX: 0000000000000002 RSI: 000055bbec327180
RDI: 0000000000000001
[  182.064315] RBP: 000055bbec327180 R08: 000000000000000a
R09: 00007f3f37de7cf0
[  182.064414] R10: 000000000000000a R11: 0000000000000246
R12: 00007f3f37de8760
[  182.064513] R13: 0000000000000002 R14: 00007f3f37de3760
R15: 0000000000000002
[  182.064691]  </TASK>
[  182.064916]
[  182.065224] The buggy address belongs to the physical page:
[  182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x6c76
[  182.067419] flags: 0x100000000000000(node=0|zone=1)
[  182.068997] raw: 0100000000000000 0000000000000000
ffffea00001b1d88 0000000000000000
[  182.069118] raw: 0000000000000000 0000000000000000
00000000ffffffff 0000000000000000
[  182.069294] page dumped because: kasan: bad access detected
[  182.069331]
[  182.069360] Memory state around the buggy address:
[  182.070006]  ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff ff
[  182.070136]  ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff ff
[  182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff ff
[  182.070305]                             ^
[  182.070456]  ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff ff
[  182.070505]  ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff ff
[  182.070606]
==================================================================
[  182.071374] Disabling lock debugging due to kernel taint

/*****************************end*****************************/

After fixing the bug as done in the patch, we can find KASAN do not report
the bug and the device(00:03.0) has been successfully removed.

/*****************************start***************************/

root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove
root@kernel:~#

/******************************end****************************/

---
 drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/neterion/vxge/vxge-main.c +1 -1
index c6950e580883..7fa71a66f19c 100644
@@ -4790,10 +4790,10 @@ static void vxge_remove(struct pci_dev *pdev)
 	for (i = 0; i < vdev->no_of_vpath; i++)
 		vxge_free_mac_add_list(&vdev->vpaths[i]);
 
+	iounmap(vdev->bar0);
 	vxge_device_unregister(hldev);
 	/* Do not call pci_disable_sriov here, as it will break child devices */
 	vxge_hw_device_terminate(hldev);
-	iounmap(vdev->bar0);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
 	driver_config->config_dev_cnt--;
Signature · 1 line
2.35.1
author maintainer
#12 lore raw

PATCH 10/13 mips: lantiq: xway: Fix refcount leak bug in sysctrl

In reply to Sasha Levin

From: Liang He <[email protected]>

[ Upstream commit 76695592711ef1e215cc24ed3e1cd857d7fc3098 ]

In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

---
 arch/mips/lantiq/xway/sysctrl.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/mips/lantiq/xway/sysctrl.c +4 -0
index dd7c36a193e3..6891456a7603 100644
@@ -457,6 +457,10 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_ebu, 0, &res_ebu))
 		panic("Failed to get core resources");
 
+	of_node_put(np_pmu);
+	of_node_put(np_cgu);
+	of_node_put(np_ebu);
+
 	if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
 				res_pmu.name) ||
 		!request_mem_region(res_cgu.start, resource_size(&res_cgu),
Signature · 1 line
2.35.1
author maintainer
#11 lore raw

PATCH 9/13 mips: lantiq: falcon: Fix refcount leak bug in sysctrl

In reply to Sasha Levin

From: Liang He <[email protected]>

[ Upstream commit 72a2af539fff975caadd9a4db3f99963569bd9c9 ]

In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

---
 arch/mips/lantiq/falcon/sysctrl.c | 6 ++++++
 1 file changed, 6 insertions(+)
arch/mips/lantiq/falcon/sysctrl.c +6 -0
index 714d92659489..665739bd4190 100644
@@ -210,6 +210,12 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
 		panic("Failed to get core resources");
 
+	of_node_put(np_status);
+	of_node_put(np_ebu);
+	of_node_put(np_sys1);
+	of_node_put(np_syseth);
+	of_node_put(np_sysgpe);
+
 	if ((request_mem_region(res_status.start, resource_size(&res_status),
 				res_status.name) < 0) ||
 		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
Signature · 1 line
2.35.1
author maintainer
#13 lore raw

PATCH 11/13 mips/pic32/pic32mzda: Fix refcount leak bugs

In reply to Sasha Levin

From: Liang He <[email protected]>

[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]

of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore.

---
 arch/mips/pic32/pic32mzda/init.c | 7 ++++++-
 arch/mips/pic32/pic32mzda/time.c | 3 +++
 2 files changed, 9 insertions(+), 1 deletion(-)
arch/mips/pic32/pic32mzda/init.c +6 -1
index 406c6c5cec29..f8985d4573e6 100644
@@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
 		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
 		if (np) {
 			lookup->name = (char *)np->name;
-			if (lookup->phys_addr)
+			if (lookup->phys_addr) {
+				of_node_put(np);
 				continue;
+			}
 			if (!of_address_to_resource(np, 0, &res))
 				lookup->phys_addr = res.start;
+			of_node_put(np);
 		}
 	}
 
+	of_node_put(root);
+
 	return 0;
 }
 
arch/mips/pic32/pic32mzda/time.c +3 -0
index 62a0a78b6c64..bfafe241c1b5 100644
@@ -40,6 +40,9 @@ static unsigned int pic32_xlate_core_timer_irq(void)
 		goto default_map;
 
 	irq = irq_of_parse_and_map(node, 0);
+
+	of_node_put(node);
+
 	if (!irq)
 		goto default_map;
 
Signature · 1 line
2.35.1
author maintainer
#16 lore raw

PATCH 12/13 mips: lantiq: Add missing of_node_put() in irq.c

In reply to Sasha Levin

From: Liang He <[email protected]>

[ Upstream commit 3748d2185ac4c2c6f80989672253aad909ecaf95 ]

In icu_of_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

---
 arch/mips/lantiq/irq.c | 1 +
 1 file changed, 1 insertion(+)
arch/mips/lantiq/irq.c +1 -0
index e64f678ca12c..e29dc58271b2 100644
@@ -460,6 +460,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (!ltq_eiu_membase)
 			panic("Failed to remap eiu memory");
 	}
+	of_node_put(eiu_node);
 
 	return 0;
 }
Signature · 1 line
2.35.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/13 spi: spi-cadence: Fix SPI CS gets toggling sporadically

From: Sai Krishna Potthuri <[email protected]>

[ Upstream commit 21b511ddee09a78909035ec47a6a594349fe3296 ]

As part of unprepare_transfer_hardware, SPI controller will be disabled which will indirectly deassert the CS line. This will create a problem in some of the devices where message will be transferred with cs_change flag set(CS should not be deasserted).
As per SPI controller implementation, if SPI controller is disabled then all output enables are inactive and all pins are set to input mode which means CS will go to default state high(deassert). This leads to an issue when core explicitly ask not to deassert the CS (cs_change = 1). This patch fix the above issue by checking the Slave select status bits from configuration register before disabling the SPI.

---
 drivers/spi/spi-cadence.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/spi/spi-cadence.c +8 -2
index e383c6368915..6d294a1fa5e5 100644
@@ -72,6 +72,7 @@
 #define CDNS_SPI_BAUD_DIV_SHIFT		3 /* Baud rate divisor shift in CR */
 #define CDNS_SPI_SS_SHIFT		10 /* Slave Select field shift in CR */
 #define CDNS_SPI_SS0			0x1 /* Slave Select zero */
+#define CDNS_SPI_NOSS			0x3C /* No Slave select */
 
 /*
  * SPI Interrupt Registers bit Masks
@@ -444,15 +445,20 @@ static int cdns_prepare_transfer_hardware(struct spi_master *master)
  * @master:	Pointer to the spi_master structure which provides
  *		information about the controller.
  *
- * This function disables the SPI master controller.
+ * This function disables the SPI master controller when no slave selected.
  *
  * Return:	0 always
  */
 static int cdns_unprepare_transfer_hardware(struct spi_master *master)
 {
 	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	u32 ctrl_reg;
 
-	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
+	/* Disable the SPI if slave is deselected */
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
+	ctrl_reg = (ctrl_reg & CDNS_SPI_CR_SSCTRL) >>  CDNS_SPI_SS_SHIFT;
+	if (ctrl_reg == CDNS_SPI_NOSS)
+		cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
 
 	return 0;
 }
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/13 spi: cadence: Detect transmit FIFO depth

From: Lars-Peter Clausen <[email protected]>

[ Upstream commit 7b40322f7183a92c4303457528ae7cda571c60b9 ]

The depth of the transmit FIFO for the Cadence SPI controller is currently hardcoded to 128. But the depth is a synthesis configuration parameter of the core and can vary between different SoCs.

If the configured FIFO size is less than 128 the driver will busy loop in the cdns_spi_fill_tx_fifo() function waiting for FIFO space to become available.

Depending on the length and speed of the transfer it can spin for a significant amount of time. The cdns_spi_fill_tx_fifo() function is called from the drivers interrupt handler, so it can leave interrupts disabled for a prolonged amount of time.

In addition the read FIFO will also overflow and data will be discarded.

To avoid this detect the actual size of the FIFO and use that rather than the hardcoded value.

To detect the FIFO size the FIFO threshold register is used. The register is sized so that it can hold FIFO size - 1 as its maximum value. Bits that are not needed to hold the threshold value will always read 0. By writing 0xffff to the register and then reading back the value in the register we get the FIFO size.

---
 drivers/spi/spi-cadence.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)
drivers/spi/spi-cadence.c +23 -4
index 6d294a1fa5e5..733724e71a30 100644
@@ -96,9 +96,6 @@
 #define CDNS_SPI_ER_ENABLE	0x00000001 /* SPI Enable Bit Mask */
 #define CDNS_SPI_ER_DISABLE	0x0 /* SPI Disable Bit Mask */
 
-/* SPI FIFO depth in bytes */
-#define CDNS_SPI_FIFO_DEPTH	128
-
 /* Default number of chip select lines */
 #define CDNS_SPI_DEFAULT_NUM_CS		4
 
@@ -114,6 +111,7 @@
  * @rx_bytes:		Number of bytes requested
  * @dev_busy:		Device busy flag
  * @is_decoded_cs:	Flag for decoder property set or not
+ * @tx_fifo_depth:	Depth of the TX FIFO
  */
 struct cdns_spi {
 	void __iomem *regs;
@@ -127,6 +125,7 @@ struct cdns_spi {
 	int rx_bytes;
 	u8 dev_busy;
 	u32 is_decoded_cs;
+	unsigned int tx_fifo_depth;
 };
 
 /* Macros for the SPI controller read/write */
@@ -308,7 +307,7 @@ static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi)
 {
 	unsigned long trans_cnt = 0;
 
-	while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) &&
+	while ((trans_cnt < xspi->tx_fifo_depth) &&
 	       (xspi->tx_bytes > 0)) {
 		if (xspi->txbuf)
 			cdns_spi_write(xspi, CDNS_SPI_TXD, *xspi->txbuf++);
@@ -463,6 +462,24 @@ static int cdns_unprepare_transfer_hardware(struct spi_master *master)
 	return 0;
 }
 
+/**
+ * cdns_spi_detect_fifo_depth - Detect the FIFO depth of the hardware
+ * @xspi:	Pointer to the cdns_spi structure
+ *
+ * The depth of the TX FIFO is a synthesis configuration parameter of the SPI
+ * IP. The FIFO threshold register is sized so that its maximum value can be the
+ * FIFO size - 1. This is used to detect the size of the FIFO.
+ */
+static void cdns_spi_detect_fifo_depth(struct cdns_spi *xspi)
+{
+	/* The MSBs will get truncated giving us the size of the FIFO */
+	cdns_spi_write(xspi, CDNS_SPI_THLD, 0xffff);
+	xspi->tx_fifo_depth = cdns_spi_read(xspi, CDNS_SPI_THLD) + 1;
+
+	/* Reset to default */
+	cdns_spi_write(xspi, CDNS_SPI_THLD, 0x1);
+}
+
 /**
  * cdns_spi_probe - Probe method for the SPI driver
  * @pdev:	Pointer to the platform_device structure
@@ -536,6 +553,8 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		xspi->is_decoded_cs = 0;
 
+	cdns_spi_detect_fifo_depth(xspi);
+
 	/* SPI controller initializations */
 	cdns_spi_init_hw(xspi);
 
Signature · 1 line
2.35.1
#5 lore raw

Re: [PATCH AUTOSEL 4.9 05/13] video: fbdev: skeletonfb: Fix syntax errors in comments

In reply to Sasha Levin

Hi!

Quoted 5 lines

From: Xiang wangx <[email protected]>

[ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]

Delete the redundant word 'its'.

Calling typo in comment "syntax error" is ... interesting. Anyway, we don't need this in stable.

Best regards,
Pavel

Quoted 12 lines

+++ b/drivers/video/fbdev/skeletonfb.c

drivers/video/fbdev/skeletonfb.c +1 -1
@@ -96,7 +96,7 @@ static struct fb_fix_screeninfo xxxfb_fix = {
 
     /*
      * 	Modern graphical hardware not only supports pipelines but some 
-     *  also support multiple monitors where each display can have its  
+     *  also support multiple monitors where each display can have
      *  its own unique data. In this case each display could be  
      *  represented by a separate framebuffer device thus a separate 
      *  struct fb_info. Now the struct xxx_par represents the graphics
Signature · 1 line
2.35.1
Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#9 lore raw

Re: [PATCH AUTOSEL 4.9 08/13] video: fbdev: simplefb: Check before clk_put() not needed

In reply to Sasha Levin

Hi!

Quoted 4 lines

[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]

clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it.

Nice cleanup, but not a bugfix; we don't need it in -stable.

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#14 lore raw

Re: [PATCH AUTOSEL 4.9 11/13] mips/pic32/pic32mzda: Fix refcount leak bugs

In reply to Sasha Levin

Hi!

Quoted 8 lines

From: Liang He <[email protected]>

[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]

of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore.

It looks like this may introduces an use-after-free bug:

Quoted 5 lines

+++ b/arch/mips/pic32/pic32mzda/init.c

arch/mips/pic32/pic32mzda/init.c +0 -0
@@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
 		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
 		if (np) {
 			lookup->name = (char *)np->name;

arch/mips/pic32/pic32mzda/init.c static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup) · line 142

Quoted 10 lines
arch/mips/pic32/pic32mzda/init.c +4 -1
-			if (lookup->phys_addr)
+			if (lookup->phys_addr) {
+				of_node_put(np);
 				continue;
+			}
 			if (!of_address_to_resource(np, 0, &res))
 				lookup->phys_addr = res.start;
+			of_node_put(np);
 		}
 	}

lookup->name now contains pointer taken from np->name, but we did put() on the np. What guarantees np->name is not freed?

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#15 lore raw

Re:Re: [PATCH AUTOSEL 4.9 11/13] mips/pic32/pic32mzda: Fix refcount leak bugs

Quoted 32 lines · Pavel Machek

Hi!

Quoted 8 lines

From: Liang He <[email protected]>

[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]

of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore.

It looks like this may introduces an use-after-free bug:

Quoted 5 lines

+++ b/arch/mips/pic32/pic32mzda/init.c

arch/mips/pic32/pic32mzda/init.c +0 -0
@@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
 		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
 		if (np) {
 			lookup->name = (char *)np->name;

arch/mips/pic32/pic32mzda/init.c static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup) · line 142

Quoted 10 lines
arch/mips/pic32/pic32mzda/init.c +4 -1
-			if (lookup->phys_addr)
+			if (lookup->phys_addr) {
+				of_node_put(np);
 				continue;
+			}
 			if (!of_address_to_resource(np, 0, &res))
 				lookup->phys_addr = res.start;
+			of_node_put(np);
 		}
 	}

lookup->name now contains pointer taken from np->name, but we did put() on the np. What guarantees np->name is not freed?

Quoted 2 lines

Best regards,
Pavel

Hi, Pavel.

Thanks for you to review this patched code.

In fact, the |PUT| on 'np' will not lead to the |FREE|.
First, before calling of_find_compatible_node(), the target object's refcount must be >= 1, as the object is alive. Then, after calling of_find_compatible_node(), its refcount must be >=2.
So, after calling of_node_put(np), its refcount must be still >=1.

In fact, these |PUT|s are just used to keep refcount balance for the |GET| in of_find_compatible_node().

If there is anything wrong, please correct me.

Thans very much to review my patch code.

Liang

Quoted 3 lines
Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#10 lore raw

Re: [PATCH AUTOSEL 4.9 08/13] video: fbdev: simplefb: Check before clk_put() not needed

In reply to Sasha Levin

Hi Sasha,

Quoted 5 lines · Sasha Levin

From: Yihao Han <[email protected]>

[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]

clk_put() already checks the clk ptr using !clk and IS_ERR()

While I think that is true for all clock implementations in v5.19-rc4, it is not true for v4.9.320.

Quoted 10 lines

so there is no need to check it again before calling it.

drivers/video/fbdev/simplefb.c static int simplefb_clocks_init(struct simplefb_par *par, · line 237

Quoted 9 lines
drivers/video/fbdev/simplefb.c +1 -2
@@ -231,8 +231,7 @@ static int simplefb_clocks_init(struct simplefb_par *par,
                if (IS_ERR(clock)) {
                        if (PTR_ERR(clock) == -EPROBE_DEFER) {
                                while (--i >= 0) {
-                                       if (par->clks[i])
-                                               clk_put(par->clks[i]);
+                                       clk_put(par->clks[i]);
                                }
                                kfree(par->clks);
                                return -EPROBE_DEFER;

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds