Skip to contentSkip to conversation

ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to static variables

PATCH In review Tom Rix 3 participants 3 messages Jun 29, 2022 – Jun 30, 2022

Subsystems (3)
lore
Share & tools
lore

Tom Rix

author
#0 lore raw

PATCH 1/1 ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to static variables

sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static? sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?

Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c, so their storage class specifiers should be static.

Fixes 83d74e354200 ("ASoC: samsung: rx1950: turn into platform driver")
---
 sound/soc/samsung/rx1950_uda1380.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/samsung/rx1950_uda1380.c +2 -2
index ff3acc94a454..abf28321f7d7 100644
@@ -128,7 +128,7 @@ static int rx1950_startup(struct snd_pcm_substream *substream)
 					&hw_rates);
 }
 
-struct gpio_desc *gpiod_speaker_power;
+static struct gpio_desc *gpiod_speaker_power;
 
 static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
@@ -228,7 +228,7 @@ static int rx1950_probe(struct platform_device *pdev)
 	return devm_snd_soc_register_card(dev, &rx1950_asoc);
 }
 
-struct platform_driver rx1950_audio = {
+static struct platform_driver rx1950_audio = {
 	.driver = {
 		.name = "rx1950-audio",
 		.pm = &snd_soc_pm_ops,
Signature · 1 line
2.27.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 10 lines · Tom Rix

sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static? sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?

Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c, so their storage class specifiers should be static.

Fixes 83d74e354200 ("ASoC: samsung: rx1950: turn into platform driver")

---

Best regards,
Krzysztof

maintainer
#2 lore raw
In reply to Tom Rix
Quoted 8 lines · Tom Rix

sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static? sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?

Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c, so their storage class specifiers should be static.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to static variables

      commit: d2294461b90e0c5b3bbfaaf2c8baff4fd3e2bb13

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark