5.4.204-rc1 review
Subsystems (2)
Greg Kroah-Hartman
maintainercover 5.4.204-rc1 review
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.204-rc1
Greg Kroah-Hartman <[email protected]>
clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup()
Daniele Palmas <[email protected]>
net: usb: qmi_wwan: add Telit 0x1070 composition
Carlo Lobrano <[email protected]>
net: usb: qmi_wwan: add Telit 0x1060 composition
Oleksandr Tyshchenko <[email protected]>
xen/arm: Fix race in RB-tree based P2M accounting
Roger Pau Monne <[email protected]>
xen/blkfront: force data bouncing when backend is untrusted
Roger Pau Monne <[email protected]>
xen/netfront: force data bouncing when backend is untrusted
Roger Pau Monne <[email protected]>
xen/netfront: fix leaking data in shared pages
Roger Pau Monne <[email protected]>
xen/blkfront: fix leaking data in shared pages
Mathieu Desnoyers <[email protected]>
selftests/rseq: Change type of rseq_offset to ptrdiff_t
Mathieu Desnoyers <[email protected]>
selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread area
Mathieu Desnoyers <[email protected]>
selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area
Mathieu Desnoyers <[email protected]>
selftests/rseq: Fix: work-around asm goto compiler bugs
Mathieu Desnoyers <[email protected]>
selftests/rseq: Remove arm/mips asm goto compiler work-around
Mathieu Desnoyers <[email protected]>
selftests/rseq: Fix warnings about #if checks of undefined tokens
Mathieu Desnoyers <[email protected]>
selftests/rseq: Fix ppc32 offsets by using long rather than off_t
Mathieu Desnoyers <[email protected]>
selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store
Mathieu Desnoyers <[email protected]>
selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian
Mathieu Desnoyers <[email protected]>
selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35
Mathieu Desnoyers <[email protected]>
selftests/rseq: Introduce thread pointer getters
Mathieu Desnoyers <[email protected]>
selftests/rseq: Introduce rseq_get_abi() helper
Mathieu Desnoyers <[email protected]>
selftests/rseq: Remove volatile from __rseq_abi
Mathieu Desnoyers <[email protected]>
selftests/rseq: Remove useless assignment to cpu variable
Mathieu Desnoyers <[email protected]>
selftests/rseq: introduce own copy of rseq uapi header
Shuah Khan <[email protected]>
selftests/rseq: remove ARRAY_SIZE define from individual tests
Peter Oskolkov <[email protected]>
rseq/selftests,x86_64: Add rseq_offset_deref_addv()
katrinzhou <[email protected]>
ipv6/sit: fix ipip6_tunnel_get_prl return value
kernel test robot <[email protected]>
sit: use min
Doug Berger <[email protected]>
net: dsa: bcm_sf2: force pause link settings
Yang Yingliang <[email protected]>
hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
Demi Marie Obenour <[email protected]>
xen/gntdev: Avoid blocking in unmap_grant_pages()
Jakub Kicinski <[email protected]>
net: tun: avoid disabling NAPI twice
Michael Walle <[email protected]>
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
Krzysztof Kozlowski <[email protected]>
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
Yevhen Orlov <[email protected]>
net: bonding: fix use-after-free after 802.3ad slave unbind
Eric Dumazet <[email protected]>
net: bonding: fix possible NULL deref in rlb code
Victor Nogueira <[email protected]>
net/sched: act_api: Notify user space if any actions were flushed before error
Pablo Neira Ayuso <[email protected]>
netfilter: nft_dynset: restore set element counter when failing to update
Masahiro Yamada <[email protected]>
s390: remove unneeded 'select BUILD_BIN2C'
Miaoqian Lin <[email protected]>
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
Jason Wang <[email protected]>
caif_virtio: fix race between virtio_device_ready() and ndo_open()
YueHaibing <[email protected]>
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
Oliver Neukum <[email protected]>
usbnet: fix memory allocation in helpers
Tao Liu <[email protected]>
linux/dim: Fix divide by 0 in RDMA DIM
Kamal Heib <[email protected]>
RDMA/qedr: Fix reporting QP timeout attribute
Jakub Kicinski <[email protected]>
net: tun: stop NAPI when detaching queues
Jakub Kicinski <[email protected]>
net: tun: unlink NAPI from device on destruction
Dimitris Michailidis <[email protected]>
selftests/net: pass ipv6_args to udpgso_bench's IPv6 TCP test
Jason Wang <[email protected]>
virtio-net: fix race between ndo_open() and virtio_device_ready()
Jose Alonso <[email protected]>
net: usb: ax88179_178a: Fix packet receiving
Duoming Zhou <[email protected]>
net: rose: fix UAF bugs caused by timer handler
Chuck Lever <[email protected]>
SUNRPC: Fix READ_PLUS crasher
Jason A. Donenfeld <[email protected]>
s390/archrandom: simplify back to earlier design and initialize earlier
Mikulas Patocka <[email protected]>
dm raid: fix KASAN warning in raid5_add_disks
Heinz Mauelshagen <[email protected]>
dm raid: fix accesses beyond end of raid member array
Naveen N. Rao <[email protected]>
powerpc/bpf: Fix use of user_pt_regs in uapi
Liam Howlett <[email protected]>
powerpc/prom_init: Fix kernel config grep
Chris Ye <[email protected]>
nvdimm: Fix badblocks clear off-by-one error
Nicolas Dichtel <[email protected]>
ipv6: take care of disable_policy when restoring routes
-------------
Diffstat:
Makefile | 4 +- arch/arm/xen/p2m.c | 6 +- arch/powerpc/include/asm/bpf_perf_event.h | 9 + arch/powerpc/include/uapi/asm/bpf_perf_event.h | 9 - arch/powerpc/kernel/prom_init_check.sh | 2 +- arch/s390/Kconfig | 1 - arch/s390/crypto/arch_random.c | 111 +-------- arch/s390/include/asm/archrandom.h | 21 +- arch/s390/kernel/setup.c | 5 + drivers/block/xen-blkfront.c | 56 +++-- drivers/clocksource/timer-ixp4xx.c | 1 - drivers/devfreq/event/exynos-ppmu.c | 8 +- drivers/hwmon/ibmaem.c | 12 +- drivers/infiniband/hw/qedr/qedr.h | 1 + drivers/infiniband/hw/qedr/verbs.c | 4 +- drivers/md/dm-raid.c | 34 +-- drivers/md/raid5.c | 1 + drivers/net/bonding/bond_3ad.c | 3 +- drivers/net/bonding/bond_alb.c | 2 +- drivers/net/caif/caif_virtio.c | 10 +- drivers/net/dsa/bcm_sf2.c | 5 + drivers/net/tun.c | 15 +- drivers/net/usb/ax88179_178a.c | 101 ++++++--- drivers/net/usb/qmi_wwan.c | 2 + drivers/net/usb/usbnet.c | 4 +- drivers/net/virtio_net.c | 8 +- drivers/net/xen-netfront.c | 52 ++++- drivers/nfc/nfcmrvl/i2c.c | 6 +- drivers/nfc/nfcmrvl/spi.c | 6 +- drivers/nfc/nxp-nci/i2c.c | 3 + drivers/nvdimm/bus.c | 4 +- drivers/xen/gntdev-common.h | 8 + drivers/xen/gntdev.c | 147 ++++++++---- include/linux/dim.h | 2 +- net/ipv6/addrconf.c | 4 - net/ipv6/route.c | 9 +- net/ipv6/seg6_hmac.c | 1 - net/ipv6/sit.c | 10 +- net/netfilter/nft_set_hash.c | 2 + net/rose/rose_timer.c | 34 +-- net/sched/act_api.c | 22 +- net/sunrpc/xdr.c | 2 +- tools/testing/selftests/net/udpgso_bench.sh | 2 +- tools/testing/selftests/rseq/Makefile | 2 +- .../testing/selftests/rseq/basic_percpu_ops_test.c | 5 +- tools/testing/selftests/rseq/compiler.h | 30 +++ tools/testing/selftests/rseq/param_test.c | 8 +- tools/testing/selftests/rseq/rseq-abi.h | 151 +++++++++++++ tools/testing/selftests/rseq/rseq-arm.h | 110 ++++----- tools/testing/selftests/rseq/rseq-arm64.h | 79 +++++-- .../selftests/rseq/rseq-generic-thread-pointer.h | 25 +++ tools/testing/selftests/rseq/rseq-mips.h | 71 ++---- .../selftests/rseq/rseq-ppc-thread-pointer.h | 30 +++ tools/testing/selftests/rseq/rseq-ppc.h | 128 +++++++---- tools/testing/selftests/rseq/rseq-s390.h | 55 +++-- tools/testing/selftests/rseq/rseq-skip.h | 2 +- tools/testing/selftests/rseq/rseq-thread-pointer.h | 19 ++ .../selftests/rseq/rseq-x86-thread-pointer.h | 40 ++++ tools/testing/selftests/rseq/rseq-x86.h | 247 ++++++++++++++++----- tools/testing/selftests/rseq/rseq.c | 165 +++++++------- tools/testing/selftests/rseq/rseq.h | 30 ++- 61 files changed, 1290 insertions(+), 656 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/58 ipv6: take care of disable_policy when restoring routes
From: Nicolas Dichtel <[email protected]>
commit 3b0dc529f56b5f2328244130683210be98f16f7f upstream.
When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up.
Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it.
--- net/ipv6/addrconf.c | 4 ---- net/ipv6/route.c | 9 ++++++++- 2 files changed, 8 insertions(+), 5 deletions(-)
net/ipv6/addrconf.c +0 -4
@@ -1102,10 +1102,6 @@ ipv6_add_addr(struct inet6_dev *idev, st goto out; } -if (net->ipv6.devconf_all->disable_policy || - idev->cnf.disable_policy) - f6i->dst_nopolicy = true; -neigh_parms_data_state_setall (idev->nd_parms); ifa->addr = *cfg->pfx;
net/ipv6/route.c +8 -1
@@ -4483,8 +4483,15 @@ struct fib6_info *addrconf_f6i_alloc(str } f6i =ip6_route_info_create (&cfg, gfp_flags,NULL ); -if (!IS_ERR (f6i)) +if (!IS_ERR (f6i)) { f6i->dst_nocount = true; + +if (!anycast && + (net->ipv6.devconf_all->disable_policy || + idev->cnf.disable_policy)) + f6i->dst_nopolicy = true; + } +return f6i; }
Greg Kroah-Hartman
maintainerPATCH 2/58 nvdimm: Fix badblocks clear off-by-one error
In reply to Greg Kroah-HartmanFrom: Chris Ye <[email protected]>
commit ef9102004a87cb3f8b26e000a095a261fc0467d3 upstream.
nvdimm_clear_badblocks_region() validates badblock clearing requests against the span of the region, however it compares the inclusive badblock request range to the exclusive region range. Fix up the off-by-one error.
--- drivers/nvdimm/bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nvdimm/bus.c +2 -2
@@ -187,8 +187,8 @@ static int nvdimm_clear_badblocks_region ndr_end = nd_region->ndr_start + nd_region->ndr_size -1 ;/* make sure we are in the region */ -if (ctx->phys < nd_region->ndr_start - || (ctx->phys + ctx->cleared) > ndr_end) +if (ctx->phys < nd_region->ndr_start || + (ctx->phys + ctx->cleared -1 ) > ndr_end)return 0 ; sector = (ctx->phys - nd_region->ndr_start) /512 ;
Greg Kroah-Hartman
maintainerPATCH 3/58 powerpc/prom_init: Fix kernel config grep
In reply to Greg Kroah-HartmanFrom: Liam Howlett <[email protected]>
commit 6886da5f49e6d86aad76807a93f3eef5e4f01b10 upstream.
When searching for config options, use the KCONFIG_CONFIG shell variable so that builds using non-standard config locations work.
--- arch/powerpc/kernel/prom_init_check.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/prom_init_check.sh +1 -1
@@ -13,7 +13,7 @@ # If you really need to reference something from prom_init.o add # it to the list below: -grep "^CONFIG_KASAN=y$" .config >/dev/null +grep "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} >/dev/null if [ $? -eq 0 ] then MEM_FUNCS="__memcpy __memset"
Greg Kroah-Hartman
maintainerPATCH 4/58 powerpc/bpf: Fix use of user_pt_regs in uapi
In reply to Greg Kroah-HartmanFrom: Naveen N. Rao <[email protected]>
commit b21bd5a4b130f8370861478d2880985daace5913 upstream.
Trying to build a .c file that includes <linux/bpf_perf_event.h>:
$ cat test_bpf_headers.c #include <linux/bpf_perf_event.h>
throws the below error:
/usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
14 | bpf_user_pt_regs_t regs; | ^~~~
This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs' in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct user_pt_regs' is not exposed to userspace.
Powerpc has both pt_regs and user_pt_regs structures. However, unlike arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'. As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for userspace.
Within the kernel though, we want to typedef bpf_user_pt_regs_t to 'struct user_pt_regs'.
Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the uapi/asm-generic version of the header is exposed to userspace. Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the kernel.
Note that this was not showing up with the bpf selftest build since tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc variant.
--- arch/powerpc/include/asm/bpf_perf_event.h | 9 +++++++++ arch/powerpc/include/uapi/asm/bpf_perf_event.h | 9 --------- 2 files changed, 9 insertions(+), 9 deletions(-) create mode 100644 arch/powerpc/include/asm/bpf_perf_event.h delete mode 100644 arch/powerpc/include/uapi/asm/bpf_perf_event.h
arch/powerpc/include/asm/bpf_perf_event.h new file +9 -0
@@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BPF_PERF_EVENT_H +#define _ASM_POWERPC_BPF_PERF_EVENT_H + +#include <asm/ptrace.h> + +typedef struct user_pt_regs bpf_user_pt_regs_t ; + +#endif /* _ASM_POWERPC_BPF_PERF_EVENT_H */
arch/powerpc/include/uapi/asm/bpf_perf_event.h deleted +0 -9
@@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ -#define _UAPI__ASM_BPF_PERF_EVENT_H__ - -#include <asm/ptrace.h> - -typedef struct user_pt_regs bpf_user_pt_regs_t ; - -#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
Greg Kroah-Hartman
maintainerPATCH 5/58 dm raid: fix accesses beyond end of raid member array
In reply to Greg Kroah-HartmanFrom: Heinz Mauelshagen <[email protected]>
commit 332bd0778775d0cf105c4b9e03e460b590749916 upstream.
On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor.
In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array.
Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN enabled).
--- drivers/md/dm-raid.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)
drivers/md/dm-raid.c +18 -16
@@ -998,12 +998,13 @@ static int validate_region_size(struct rstatic int validate_raid_redundancy (struct raid_set *rs) {unsigned int i, rebuild_cnt =0 ; -unsigned int rebuilds_per_group =0 , copies; +unsigned int rebuilds_per_group =0 , copies, raid_disks;unsigned int group_size, last_group_start; -for (i =0 ; i < rs->md.raid_disks; i++) -if (!test_bit (In_sync, &rs->dev[i].rdev.flags) || - !rs->dev[i].rdev.sb_page) +for (i =0 ; i < rs->raid_disks; i++) +if (!test_bit (FirstUse, &rs->dev[i].rdev.flags) && + ((!test_bit (In_sync, &rs->dev[i].rdev.flags) || + !rs->dev[i].rdev.sb_page))) rebuild_cnt++;switch (rs->md.level) {
@@ -1043,8 +1044,9 @@ static int validate_raid_redundancy(stru* A A B B C * C D D E E */ + raid_disks =min (rs->raid_disks, rs->md.raid_disks);if (__is_raid10_near (rs->md.new_layout)) { -for (i =0 ; i < rs->md.raid_disks; i++) { +for (i =0 ; i < raid_disks; i++) {if (!(i % copies)) rebuilds_per_group =0 ; if ((!rs->dev[i].rdev.sb_page ||
@@ -1067,10 +1069,10 @@ static int validate_raid_redundancy(stru* results in the need to treat the last (potentially larger) * set differently. */ - group_size = (rs->md.raid_disks / copies); - last_group_start = (rs->md.raid_disks / group_size) -1 ; + group_size = (raid_disks / copies); + last_group_start = (raid_disks / group_size) -1 ; last_group_start *= group_size; -for (i =0 ; i < rs->md.raid_disks; i++) { +for (i =0 ; i < raid_disks; i++) {if (!(i % copies) && !(i > last_group_start)) rebuilds_per_group =0 ; if ((!rs->dev[i].rdev.sb_page ||
@@ -1585,7 +1587,7 @@ static sector_t __rdev_sectors(struct ra {int i; -for (i =0 ; i < rs->md.raid_disks; i++) { +for (i =0 ; i < rs->raid_disks; i++) {struct md_rdev *rdev = &rs->dev[i].rdev; if (!test_bit(Journal, &rdev->flags) &&
@@ -3746,13 +3748,13 @@ static int raid_iterate_devices(struct dunsigned int i;int r =0 ; -for (i =0 ; !r && i < rs->md.raid_disks; i++) -if (rs->dev[i].data_dev) - r =fn (ti, - rs->dev[i].data_dev, -0 ,/* No offset on data devs */ - rs->md.dev_sectors, - data); +for (i =0 ; !r && i < rs->raid_disks; i++) { +if (rs->dev[i].data_dev) { + r =fn (ti, rs->dev[i].data_dev, +0 ,/* No offset on data devs */ + rs->md.dev_sectors, data); + } + }return r; }
Greg Kroah-Hartman
maintainerPATCH 6/58 dm raid: fix KASAN warning in raid5_add_disks
In reply to Greg Kroah-HartmanFrom: Mikulas Patocka <[email protected]>
commit 617b365872a247480e9dcd50a32c8d1806b21861 upstream.
There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits.
--- drivers/md/raid5.c | 1 + 1 file changed, 1 insertion(+)
drivers/md/raid5.c +1 -0
@@ -7722,6 +7722,7 @@ static int raid5_add_disk(struct mddev **/ if (rdev->saved_raid_disk >=0 && rdev->saved_raid_disk >= first && + rdev->saved_raid_disk <= last && conf->disks[rdev->saved_raid_disk].rdev ==NULL ) first = rdev->saved_raid_disk;
Greg Kroah-Hartman
maintainerPATCH 7/58 s390/archrandom: simplify back to earlier design and initialize earlier
In reply to Greg Kroah-HartmanFrom: Jason A. Donenfeld <[email protected]>
commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream.
s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.
Previously, the TRNG was wired up to arch_get_random_{long,int}(), but it was observed that this was being called really frequently, resulting in high overhead. So it was changed to be wired up to arch_get_random_ seed_{long,int}(), which was a reasonable decision. Later on, the DRBG was then wired up to arch_get_random_{long,int}(), with a complicated buffer filling thread, to control overhead and rate.
Fortunately, none of the performance issues matter much now. The RNG always attempts to use arch_get_random_seed_{long,int}() first, which means a complicated implementation of arch_get_random_{long,int}() isn't really valuable or useful to have around. And it's only used when reseeding, which means it won't hit the high throughput complications that were faced before.
So this commit returns to an earlier design of just calling the TRNG in arch_get_random_seed_{long,int}(), and returning false in arch_get_ random_{long,int}().
Part of what makes the simplification possible is that the RNG now seeds itself using the TRNG at bootup. But this only works if the TRNG is detected early in boot, before random_init() is called. So this commit also causes that check to happen in setup_arch().
--- arch/s390/crypto/arch_random.c | 111 ------------------------------------- arch/s390/include/asm/archrandom.h | 21 ++++--- arch/s390/kernel/setup.c | 5 + 3 files changed, 18 insertions(+), 119 deletions(-)
arch/s390/crypto/arch_random.c +1 -110
@@ -2,126 +2,17 @@/* * s390 arch random implementation. * -* Copyright IBM Corp. 2017, 2018 +* Copyright IBM Corp. 2017, 2020 * Author(s): Harald Freudenberger -* -* The s390_arch_random_generate() function may be called from random.c -* in interrupt context. So this implementation does the best to be very -* fast. There is a buffer of random data which is asynchronously checked -* and filled by a workqueue thread. -* If there are enough bytes in the buffer the s390_arch_random_generate() -* just delivers these bytes. Otherwise false is returned until the -* worker thread refills the buffer. -* The worker fills the rng buffer by pulling fresh entropy from the -* high quality (but slow) true hardware random generator. This entropy -* is then spread over the buffer with an pseudo random generator PRNG. -* As the arch_get_random_seed_long() fetches 8 bytes and the calling -* function add_interrupt_randomness() counts this as 1 bit entropy the -* distribution needs to make sure there is in fact 1 bit entropy contained -* in 8 bytes of the buffer. The current values pull 32 byte entropy -* and scatter this into a 2048 byte buffer. So 8 byte in the buffer -* will contain 1 bit of entropy. -* The worker thread is rescheduled based on the charge level of the -* buffer but at least with 500 ms delay to avoid too much CPU consumption. -* So the max. amount of rng data delivered via arch_get_random_seed is -* limited to 4k bytes per second. */ #include <linux/kernel.h> #include <linux/atomic.h> #include <linux/random.h> -#include <linux/slab.h> #include <linux/static_key.h> -#include <linux/workqueue.h> #include <asm/cpacf.h> DEFINE_STATIC_KEY_FALSE (s390_arch_random_available);atomic64_t s390_arch_random_counter =ATOMIC64_INIT (0 );EXPORT_SYMBOL (s390_arch_random_counter); - -#define ARCH_REFILL_TICKS (HZ/2) -#define ARCH_PRNG_SEED_SIZE 32 -#define ARCH_RNG_BUF_SIZE 2048 - -static DEFINE_SPINLOCK (arch_rng_lock); -static u8 *arch_rng_buf; -static unsigned int arch_rng_buf_idx; - -static void arch_rng_refill_buffer (struct work_struct *); -static DECLARE_DELAYED_WORK(arch_rng_work, arch_rng_refill_buffer); - -bool s390_arch_random_generate (u8 *buf,unsigned int nbytes) -{ -/* max hunk is ARCH_RNG_BUF_SIZE */ -if (nbytes >ARCH_RNG_BUF_SIZE ) -return false; - -/* lock rng buffer */ -if (!spin_trylock (&arch_rng_lock)) -return false; - -/* try to resolve the requested amount of bytes from the buffer */ - arch_rng_buf_idx -= nbytes; -if (arch_rng_buf_idx <ARCH_RNG_BUF_SIZE ) { -memcpy (buf, arch_rng_buf + arch_rng_buf_idx, nbytes); -atomic64_add (nbytes, &s390_arch_random_counter); -spin_unlock (&arch_rng_lock); -return true; - } - -/* not enough bytes in rng buffer, refill is done asynchronously */ -spin_unlock (&arch_rng_lock); - -return false; -} -EXPORT_SYMBOL (s390_arch_random_generate); - -static void arch_rng_refill_buffer (struct work_struct *unused) -{ -unsigned int delay =ARCH_REFILL_TICKS ; - -spin_lock (&arch_rng_lock); -if (arch_rng_buf_idx >ARCH_RNG_BUF_SIZE ) { -/* buffer is exhausted and needs refill */ -u8 seed[ARCH_PRNG_SEED_SIZE ]; -u8 prng_wa[240 ]; -/* fetch ARCH_PRNG_SEED_SIZE bytes of entropy */ -cpacf_trng (NULL ,0 , seed,sizeof (seed)); -/* blow this entropy up to ARCH_RNG_BUF_SIZE with PRNG */ -memset (prng_wa,0 ,sizeof (prng_wa)); -cpacf_prno (CPACF_PRNO_SHA512_DRNG_SEED , - &prng_wa,NULL ,0 , seed,sizeof (seed)); -cpacf_prno (CPACF_PRNO_SHA512_DRNG_GEN , - &prng_wa, arch_rng_buf,ARCH_RNG_BUF_SIZE ,NULL ,0 ); - arch_rng_buf_idx =ARCH_RNG_BUF_SIZE ; - } - delay += (ARCH_REFILL_TICKS * arch_rng_buf_idx) /ARCH_RNG_BUF_SIZE ; -spin_unlock (&arch_rng_lock); - -/* kick next check */ -queue_delayed_work (system_long_wq, &arch_rng_work, delay); -} - -static int __init s390_arch_random_init (void ) -{ -/* all the needed PRNO subfunctions available ? */ -if (cpacf_query_func (CPACF_PRNO ,CPACF_PRNO_TRNG ) && -cpacf_query_func (CPACF_PRNO ,CPACF_PRNO_SHA512_DRNG_GEN )) { - -/* alloc arch random working buffer */ - arch_rng_buf =kmalloc (ARCH_RNG_BUF_SIZE ,GFP_KERNEL ); -if (!arch_rng_buf) -return -ENOMEM ; - -/* kick worker queue job to fill the random buffer */ -queue_delayed_work (system_long_wq, - &arch_rng_work,ARCH_REFILL_TICKS ); - -/* enable arch random to the outside world */ -static_branch_enable (&s390_arch_random_available); - } - -return 0 ; -} -arch_initcall (s390_arch_random_init);
arch/s390/include/asm/archrandom.h +12 -9
@@ -2,7 +2,7 @@/* * Kernel interface for the s390 arch_random_* functions * -* Copyright IBM Corp. 2017 +* Copyright IBM Corp. 2017, 2020 * * Author: Harald Freudenberger <[email protected]> *
@@ -15,34 +15,37 @@#include <linux/static_key.h> #include <linux/atomic.h> +#include <asm/cpacf.h> DECLARE_STATIC_KEY_FALSE (s390_arch_random_available);extern atomic64_t s390_arch_random_counter; -bool s390_arch_random_generate (u8 *buf,unsigned int nbytes); - -static inline bool arch_get_random_long (unsigned long *v) +static inline bool __must_check arch_get_random_long (unsigned long *v) {return false; } -static inline bool arch_get_random_int (unsigned int *v) +static inline bool __must_check arch_get_random_int (unsigned int *v) {return false; } -static inline bool arch_get_random_seed_long (unsigned long *v) +static inline bool __must_check arch_get_random_seed_long (unsigned long *v) {if (static_branch_likely (&s390_arch_random_available)) { -return s390_arch_random_generate ((u8 *)v,sizeof (*v)); +cpacf_trng (NULL ,0 , (u8 *)v,sizeof (*v)); +atomic64_add (sizeof (*v), &s390_arch_random_counter); +return true; }return false; } -static inline bool arch_get_random_seed_int (unsigned int *v) +static inline bool __must_check arch_get_random_seed_int (unsigned int *v) {if (static_branch_likely (&s390_arch_random_available)) { -return s390_arch_random_generate ((u8 *)v,sizeof (*v)); +cpacf_trng (NULL ,0 , (u8 *)v,sizeof (*v)); +atomic64_add (sizeof (*v), &s390_arch_random_counter); +return true; }return false; }
arch/s390/kernel/setup.c +5 -0
@@ -1005,6 +1005,11 @@ static void __init setup_randomness(voidif (stsi (vmms,3 ,2 ,2 ) ==0 && vmms->count)add_device_randomness (&vmms->vm,sizeof (vmms->vm[0 ]) * vmms->count);memblock_free ((unsigned long ) vmms,PAGE_SIZE ); + +#ifdef CONFIG_ARCH_RANDOM +if (cpacf_query_func (CPACF_PRNO ,CPACF_PRNO_TRNG )) +static_branch_enable (&s390_arch_random_available); +#endif }/*
Greg Kroah-Hartman
maintainerPATCH 8/58 SUNRPC: Fix READ_PLUS crasher
In reply to Greg Kroah-HartmanFrom: Chuck Lever <[email protected]>
commit a23dd544debcda4ee4a549ec7de59e85c3c8345c upstream.
Looks like there are still cases when "space_left - frag1bytes" can legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains within the current encode buffer.
--- net/sunrpc/xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/sunrpc/xdr.c +1 -1
@@ -608,7 +608,7 @@ static __be32 *xdr_get_next_encode_buffe*/ xdr->p = (void *)p + frag2bytes; space_left = xdr->buf->buflen - xdr->buf->len; -if (space_left - nbytes >=PAGE_SIZE ) +if (space_left - frag1bytes >=PAGE_SIZE ) xdr->end = (void *)p +PAGE_SIZE ;else xdr->end = (void *)p + space_left - frag1bytes;
Greg Kroah-Hartman
maintainerPATCH 9/58 net: rose: fix UAF bugs caused by timer handler
In reply to Greg Kroah-HartmanFrom: Duoming Zhou <[email protected]>
commit 9cc02ede696272c5271a401e4f27c262359bc2f6 upstream.
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry() and rose_idletimer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and the refcount of sock is not managed properly.
One of the UAF bugs is shown below:
(thread 1) | (thread 2)
| rose_bind
| rose_connect
| rose_start_heartbeat
rose_release | (wait a time)
case ROSE_STATE_0 |
rose_destroy_socket | rose_heartbeat_expiry
rose_stop_heartbeat |
sock_put(sk) | ...
sock_put(sk) // FREE |
| bh_lock_sock(sk) // USEThe sock is deallocated by sock_put() in rose_release() and then used by bh_lock_sock() in rose_heartbeat_expiry().
Although rose_destroy_socket() calls rose_stop_heartbeat(), it could not stop the timer that is running.
The KASAN report triggered by POC is shown below:
BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110 Write of size 4 at addr ffff88800ae59098 by task swapper/3/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? irq_work_single+0xbb/0x140 ? _raw_spin_lock+0x5a/0x110 kasan_report+0xed/0x120 ? _raw_spin_lock+0x5a/0x110 kasan_check_range+0x2bd/0x2e0 _raw_spin_lock+0x5a/0x110 rose_heartbeat_expiry+0x39/0x370 ? rose_start_heartbeat+0xb0/0xb0 call_timer_fn+0x2d/0x1c0 ? rose_start_heartbeat+0xb0/0xb0 expire_timers+0x1f3/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 irq_exit_rcu+0x41/0xa0 sysvec_apic_timer_interrupt+0x8c/0xb0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1b/0x20 RIP: 0010:default_idle+0xb/0x10 RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202 RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180 RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46 R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000 R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000 ... Allocated by task 146: __kasan_kmalloc+0xc4/0xf0 sk_prot_alloc+0xdd/0x1a0 sk_alloc+0x2d/0x4e0 rose_create+0x7b/0x330 __sock_create+0x2dd/0x640 __sys_socket+0xc7/0x270 __x64_sys_socket+0x71/0x80 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 152: kasan_set_track+0x4c/0x70 kasan_set_free_info+0x1f/0x40 ____kasan_slab_free+0x124/0x190 kfree+0xd3/0x270 __sk_destruct+0x314/0x460 rose_release+0x2fa/0x3b0 sock_close+0xcb/0x230 __fput+0x2d9/0x650 task_work_run+0xd6/0x160 exit_to_user_mode_loop+0xc7/0xd0 exit_to_user_mode_prepare+0x4e/0x80 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x4f/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch adds refcount of sock when we use functions such as rose_start_heartbeat() and so on to start timer, and decreases the refcount of sock when timer is finished or deleted by functions such as rose_stop_heartbeat() and so on. As a result, the UAF bugs could be mitigated.
--- net/rose/rose_timer.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-)
net/rose/rose_timer.c +19 -15
@@ -31,89 +31,89 @@ static void rose_idletimer_expiry(structvoid rose_start_heartbeat (struct sock *sk) { -del_timer (&sk->sk_timer); +sk_stop_timer (sk, &sk->sk_timer); sk->sk_timer.function = rose_heartbeat_expiry; sk->sk_timer.expires = jiffies +5 *HZ ; -add_timer (&sk->sk_timer); +sk_reset_timer (sk, &sk->sk_timer, sk->sk_timer.expires); }void rose_start_t1timer (struct sock *sk) {struct rose_sock *rose =rose_sk (sk); -del_timer (&rose->timer); +sk_stop_timer (sk, &rose->timer); rose->timer.function = rose_timer_expiry; rose->timer.expires = jiffies + rose->t1; -add_timer (&rose->timer); +sk_reset_timer (sk, &rose->timer, rose->timer.expires); }void rose_start_t2timer (struct sock *sk) {struct rose_sock *rose =rose_sk (sk); -del_timer (&rose->timer); +sk_stop_timer (sk, &rose->timer); rose->timer.function = rose_timer_expiry; rose->timer.expires = jiffies + rose->t2; -add_timer (&rose->timer); +sk_reset_timer (sk, &rose->timer, rose->timer.expires); }void rose_start_t3timer (struct sock *sk) {struct rose_sock *rose =rose_sk (sk); -del_timer (&rose->timer); +sk_stop_timer (sk, &rose->timer); rose->timer.function = rose_timer_expiry; rose->timer.expires = jiffies + rose->t3; -add_timer (&rose->timer); +sk_reset_timer (sk, &rose->timer, rose->timer.expires); }void rose_start_hbtimer (struct sock *sk) {struct rose_sock *rose =rose_sk (sk); -del_timer (&rose->timer); +sk_stop_timer (sk, &rose->timer); rose->timer.function = rose_timer_expiry; rose->timer.expires = jiffies + rose->hb; -add_timer (&rose->timer); +sk_reset_timer (sk, &rose->timer, rose->timer.expires); }void rose_start_idletimer (struct sock *sk) {struct rose_sock *rose =rose_sk (sk); -del_timer (&rose->idletimer); +sk_stop_timer (sk, &rose->idletimer);if (rose->idle >0 ) { rose->idletimer.function = rose_idletimer_expiry; rose->idletimer.expires = jiffies + rose->idle; -add_timer (&rose->idletimer); +sk_reset_timer (sk, &rose->idletimer, rose->idletimer.expires); } }void rose_stop_heartbeat (struct sock *sk) { -del_timer (&sk->sk_timer); +sk_stop_timer (sk, &sk->sk_timer); }void rose_stop_timer (struct sock *sk) { -del_timer (&rose_sk (sk)->timer); +sk_stop_timer (sk, &rose_sk (sk)->timer); }void rose_stop_idletimer (struct sock *sk) { -del_timer (&rose_sk (sk)->idletimer); +sk_stop_timer (sk, &rose_sk (sk)->idletimer); }static void rose_heartbeat_expiry (struct timer_list *t)
@@ -130,6 +130,7 @@ static void rose_heartbeat_expiry(struct (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {bh_unlock_sock (sk);rose_destroy_socket (sk); +sock_put (sk);return ; }break ;
@@ -152,6 +153,7 @@ static void rose_heartbeat_expiry(structrose_start_heartbeat (sk);bh_unlock_sock (sk); +sock_put (sk); }static void rose_timer_expiry (struct timer_list *t)
@@ -181,6 +183,7 @@ static void rose_timer_expiry(struct timbreak ; }bh_unlock_sock (sk); +sock_put (sk); }static void rose_idletimer_expiry (struct timer_list *t)
@@ -205,4 +208,5 @@ static void rose_idletimer_expiry(structsock_set_flag (sk,SOCK_DEAD ); }bh_unlock_sock (sk); +sock_put (sk); }
Greg Kroah-Hartman
maintainerPATCH 10/58 net: usb: ax88179_178a: Fix packet receiving
In reply to Greg Kroah-HartmanFrom: Jose Alonso <[email protected]>
commit f8ebb3ac881b17712e1d5967c97ab1806b16d3d6 upstream.
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets are received normally.
This occurs because ax88179_rx_fixup does not recognise properly the usb urb received.
The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU:
0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
^ packet 1 start (pkt_len = 0x05ec)
^^^^ IP alignment pseudo header
^ ethernet packet start
last byte ethernet packet v
padding (8-bytes aligned) vvvv vvvv
0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811
0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 2
0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
...
0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
...
0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
...
0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
...
0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 7
0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
0x2130: f032 e093 7489 0740 3008 ec05 0000 0080
====1==== ====2====
hdr_off ^
pkt_len = 0x05ec ^^^^
AX_RXHDR_*=0x00830 ^^^^ ^
pkt_len = 0 ^^^^
AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^
0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080
0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080
0x2160: 3008 5803 0000 0080 3008 c800 0000 0080
===11==== ===12==== ===13==== ===14====
0x2170: 0000 0000 0e00 3821
^^^^ ^^^^ rx_hdr
^^^^ pkt_cnt=14
^^^^ hdr_off=0x2138
^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware.
There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
--- drivers/net/usb/ax88179_178a.c | 101 ++++++++++++++++++++++++++++++----------- 1 file changed, 76 insertions(+), 25 deletions(-)
drivers/net/usb/ax88179_178a.c +76 -25
@@ -1365,6 +1365,42 @@ static int ax88179_rx_fixup(struct usbne* are bundled into this buffer and where we can find an array of * per-packet metadata (which contains elements encoded into u16). */ + +/* SKB contents for current firmware: +* <packet 1> <padding> +* ... +* <packet N> <padding> +* <per-packet metadata entry 1> <dummy header> +* ... +* <per-packet metadata entry N> <dummy header> +* <padding2> <rx_hdr> +* +* where: +* <packet N> contains pkt_len bytes: +* 2 bytes of IP alignment pseudo header +* packet received +* <per-packet metadata entry N> contains 4 bytes: +* pkt_len and fields AX_RXHDR_* +* <padding> 0-7 bytes to terminate at +* 8 bytes boundary (64-bit). +* <padding2> 4 bytes to make rx_hdr terminate at +* 8 bytes boundary (64-bit) +* <dummy-header> contains 4 bytes: +* pkt_len=0 and AX_RXHDR_DROP_ERR +* <rx-hdr> contains 4 bytes: +* pkt_cnt and hdr_off (offset of +* <per-packet metadata entry 1>) +* +* pkt_cnt is number of entrys in the per-packet metadata. +* In current firmware there is 2 entrys per packet. +* The first points to the packet and the +* second is a dummy header. +* This was done probably to align fields in 64-bit and +* maintain compatibility with old firmware. +* This code assumes that <dummy header> and <padding2> are +* optional. +*/ +if (skb->len <4 )return 0 ;skb_trim (skb, skb->len -4 );
@@ -1378,51 +1414,66 @@ static int ax88179_rx_fixup(struct usbne/* Make sure that the bounds of the metadata array are inside the SKB * (and in front of the counter at the end). */ -if (pkt_cnt *2 + hdr_off > skb->len) +if (pkt_cnt *4 + hdr_off > skb->len)return 0 ; pkt_hdr = (u32 *)(skb->data + hdr_off);/* Packets must not overlap the metadata array */ skb_trim (skb, hdr_off); -for (; ; pkt_cnt--, pkt_hdr++) { +for (; pkt_cnt >0 ; pkt_cnt--, pkt_hdr++) { +u16 pkt_len_plus_padd;u16 pkt_len;le32_to_cpus (pkt_hdr); pkt_len = (*pkt_hdr >>16 ) &0x1fff ; + pkt_len_plus_padd = (pkt_len +7 ) &0xfff8 ; -if (pkt_len > skb->len) +/* Skip dummy header used for alignment +*/ +if (pkt_len ==0 ) +continue ; + +if (pkt_len_plus_padd > skb->len)return 0 ;/* Check CRC or runt packet */ -if (((*pkt_hdr & (AX_RXHDR_CRC_ERR |AX_RXHDR_DROP_ERR )) ==0 ) && - pkt_len >=2 +ETH_HLEN ) { -bool last = (pkt_cnt ==0 ); - -if (last) { - ax_skb = skb; - }else { - ax_skb =skb_clone (skb,GFP_ATOMIC ); -if (!ax_skb) -return 0 ; - } - ax_skb->len = pkt_len; -/* Skip IP alignment pseudo header */ -skb_pull (ax_skb,2 ); -skb_set_tail_pointer (ax_skb, ax_skb->len); - ax_skb->truesize = pkt_len +sizeof (struct sk_buff ); -ax88179_rx_checksum (ax_skb, pkt_hdr); +if ((*pkt_hdr & (AX_RXHDR_CRC_ERR |AX_RXHDR_DROP_ERR )) || + pkt_len <2 +ETH_HLEN ) { + dev->net->stats.rx_errors++; +skb_pull (skb, pkt_len_plus_padd); +continue ; + } -if (last) -return 1 ; +/* last packet */ +if (pkt_len_plus_padd == skb->len) { +skb_trim (skb, pkt_len); -usbnet_skb_return (dev, ax_skb); +/* Skip IP alignment pseudo header */ +skb_pull (skb,2 ); + + skb->truesize =SKB_TRUESIZE (pkt_len_plus_padd); +ax88179_rx_checksum (skb, pkt_hdr); +return 1 ; } -/* Trim this packet away from the SKB */ -if (!skb_pull (skb, (pkt_len +7 ) &0xFFF8 )) + ax_skb =skb_clone (skb,GFP_ATOMIC ); +if (!ax_skb)return 0 ; +skb_trim (ax_skb, pkt_len); + +/* Skip IP alignment pseudo header */ +skb_pull (ax_skb,2 ); + + skb->truesize = pkt_len_plus_padd + +SKB_DATA_ALIGN (sizeof (struct sk_buff )); +ax88179_rx_checksum (ax_skb, pkt_hdr); +usbnet_skb_return (dev, ax_skb); + +skb_pull (skb, pkt_len_plus_padd); } + +return 0 ; } static struct sk_buff *
Greg Kroah-Hartman
maintainerPATCH 11/58 virtio-net: fix race between ndo_open() and virtio_device_ready()
In reply to Greg Kroah-HartmanFrom: Jason Wang <[email protected]>
commit 50c0ada627f56c92f5953a8bf9158b045ad026a1 upstream.
We currently call virtio_device_ready() after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready().
Message-Id: <[email protected]>
--- drivers/net/virtio_net.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +7 -1
@@ -3219,14 +3219,20 @@ static int virtnet_probe(struct virtio_d } } - err =register_netdev (dev); +/* serialize netdev register + virtio_device_ready() with ndo_open() */ +rtnl_lock (); + + err =register_netdevice (dev);if (err) {pr_debug ("virtio_net: registering device failed\n" ); +rtnl_unlock (); goto free_failover; }virtio_device_ready (vdev); +rtnl_unlock (); + err =virtnet_cpu_notif_add (vi);if (err) {pr_debug ("virtio_net: registering cpu notifier failed\n" );
Greg Kroah-Hartman
maintainerPATCH 12/58 selftests/net: pass ipv6_args to udpgso_benchs IPv6 TCP test
In reply to Greg Kroah-HartmanFrom: Dimitris Michailidis <[email protected]>
commit b968080808f7f28b89aa495b7402ba48eb17ee93 upstream.
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments since its initial conmit. Looks like a typo.
--- tools/testing/selftests/net/udpgso_bench.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/net/udpgso_bench.sh +1 -1
@@ -120,7 +120,7 @@ run_all() { run_udp "${ipv4_args}" echo "ipv6" - run_tcp "${ipv4_args}" + run_tcp "${ipv6_args}" run_udp "${ipv6_args}" }
Greg Kroah-Hartman
maintainerPATCH 13/58 net: tun: unlink NAPI from device on destruction
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
commit 3b9bc84d311104906d2b4995a9a02d7b7ddab2db upstream.
Syzbot found a race between tun file and device destruction. NAPIs live in struct tun_file which can get destroyed before the netdev so we have to del them explicitly. The current code is missing deleting the NAPI if the queue was detached first.
--- drivers/net/tun.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/tun.c +1 -0
@@ -783,6 +783,7 @@ static void tun_detach_all(struct net_desock_put (&tfile->sk); }list_for_each_entry_safe (tfile, tmp, &tun->disabled, next) { +tun_napi_del (tfile);tun_enable_queue (tfile);tun_queue_purge (tfile);xdp_rxq_info_unreg (&tfile->xdp_rxq);
Greg Kroah-Hartman
maintainerPATCH 14/58 net: tun: stop NAPI when detaching queues
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
commit a8fc8cb5692aebb9c6f7afd4265366d25dcd1d01 upstream.
While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped.
--- drivers/net/tun.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/net/tun.c +10 -1
@@ -327,6 +327,12 @@ static void tun_napi_init(struct tun_str } } +static void tun_napi_enable (struct tun_file *tfile) +{ +if (tfile->napi_enabled) +napi_enable (&tfile->napi); +} +static void tun_napi_disable (struct tun_file *tfile) {if (tfile->napi_enabled)
@@ -709,8 +715,10 @@ static void __tun_detach(struct tun_fileif (clean) {RCU_INIT_POINTER (tfile->tun,NULL );sock_put (&tfile->sk); - }else + }else {tun_disable_queue (tun, tfile); +tun_napi_disable (tfile); + }synchronize_net ();tun_flow_delete_by_queue (tun, tun->numqueues +1 );
@@ -864,6 +872,7 @@ static int tun_attach(struct tun_structif (tfile->detached) {tun_enable_queue (tfile); +tun_napi_enable (tfile); }else {sock_hold (&tfile->sk);tun_napi_init (tun, tfile, napi, napi_frags);
Greg Kroah-Hartman
maintainerPATCH 15/58 RDMA/qedr: Fix reporting QP timeout attribute
In reply to Greg Kroah-HartmanFrom: Kamal Heib <[email protected]>
commit 118f767413ada4eef7825fbd4af7c0866f883441 upstream.
Make sure to save the passed QP timeout attribute when the QP gets modified, so when calling query QP the right value is reported and not the converted value that is required by the firmware. This issue was found while running the pyverbs tests.
--- drivers/infiniband/hw/qedr/qedr.h | 1 + drivers/infiniband/hw/qedr/verbs.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-)
drivers/infiniband/hw/qedr/qedr.h +1 -0
@@ -416,6 +416,7 @@ struct qedr_qp {u32 sq_psn;u32 qkey;u32 dest_qp_num; +u8 timeout;/* Relevant to qps created from kernel space only (ULPs) */ u8 prev_wqe_size;
drivers/infiniband/hw/qedr/verbs.c +3 -1
@@ -2259,6 +2259,8 @@ int qedr_modify_qp(struct ib_qp *ibqp, s1 <<max_t (int, attr->timeout -8 ,0 ); else qp_params.ack_timeout = 0; + + qp->timeout = attr->timeout; }if (attr_mask &IB_QP_RETRY_CNT ) {
@@ -2418,7 +2420,7 @@ int qedr_query_qp(struct ib_qp *ibqp,rdma_ah_set_dgid_raw (&qp_attr->ah_attr, ¶ms.dgid.bytes[0 ]);rdma_ah_set_port_num (&qp_attr->ah_attr,1 );rdma_ah_set_sl (&qp_attr->ah_attr,0 ); - qp_attr->timeout = params.timeout; + qp_attr->timeout = qp->timeout; qp_attr->rnr_retry = params.rnr_retry; qp_attr->retry_cnt = params.retry_cnt; qp_attr->min_rnr_timer = params.min_rnr_nak_timer;
Greg Kroah-Hartman
maintainerPATCH 16/58 linux/dim: Fix divide by 0 in RDMA DIM
In reply to Greg Kroah-HartmanFrom: Tao Liu <[email protected]>
commit 0fe3dbbefb74a8575f61d7801b08dbc50523d60d upstream.
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0.
CallTrace:
Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0
--- include/linux/dim.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/dim.h +1 -1
@@ -17,7 +17,7 @@* We consider 10% difference as significant. */ #define IS_SIGNIFICANT_DIFF (val, ref) \ - (((100UL * abs((val) - (ref))) / (ref)) > 10) + ((ref) && (((100UL * abs((val) - (ref))) / (ref)) > 10))/** * Calculate the gap between two values.
Greg Kroah-Hartman
maintainerPATCH 17/58 usbnet: fix memory allocation in helpers
In reply to Greg Kroah-HartmanFrom: Oliver Neukum <[email protected]>
commit e65af5403e462ccd7dff6a045a886c64da598c2e upstream.
usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers.
--- drivers/net/usb/usbnet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/usb/usbnet.c +2 -2
@@ -1987,7 +1987,7 @@ static int __usbnet_read_cmd(struct usbn cmd, reqtype, value, index, size);if (size) { - buf =kmalloc (size,GFP_KERNEL ); + buf =kmalloc (size,GFP_NOIO );if (!buf) goto out; }
@@ -2019,7 +2019,7 @@ static int __usbnet_write_cmd(struct usb cmd, reqtype, value, index, size);if (data) { - buf =kmemdup (data, size,GFP_KERNEL ); + buf =kmemdup (data, size,GFP_NOIO );if (!buf) goto out; }else {
Greg Kroah-Hartman
maintainerPATCH 18/58 net: ipv6: unexport __init-annotated seg6_hmac_net_init()
In reply to Greg Kroah-HartmanFrom: YueHaibing <[email protected]>
commit 53ad46169fe2996fe1b623ba6c9c4fa33847876f upstream.
As of commit 5801f064e351 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"), EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic.
This remove the EXPORT_SYMBOL to fix modpost warning:
WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init() The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.
--- net/ipv6/seg6_hmac.c | 1 - 1 file changed, 1 deletion(-)
net/ipv6/seg6_hmac.c +0 -1
@@ -410,7 +410,6 @@ int __net_init seg6_hmac_net_init(structreturn 0 ; } -EXPORT_SYMBOL (seg6_hmac_net_init);void seg6_hmac_exit (void ) {
Greg Kroah-Hartman
maintainerPATCH 19/58 caif_virtio: fix race between virtio_device_ready() and ndo_open()
In reply to Greg Kroah-HartmanFrom: Jason Wang <[email protected]>
commit 11a37eb66812ce6a06b79223ad530eb0e1d7294d upstream.
We currently depend on probe() calling virtio_device_ready() - which happens after netdev
registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready().
Message-Id: <[email protected]>
--- drivers/net/caif/caif_virtio.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/caif/caif_virtio.c +9 -1
@@ -723,13 +723,21 @@ static int cfv_probe(struct virtio_devic/* Carrier is off until netdevice is opened */ netif_carrier_off (netdev); +/* serialize netdev register + virtio_device_ready() with ndo_open() */ +rtnl_lock (); +/* register Netdev */ - err =register_netdev (netdev); + err =register_netdevice (netdev);if (err) { +rtnl_unlock ();dev_err (&vdev->dev,"Unable to register netdev (%d)\n" , err); goto err; } +virtio_device_ready (vdev); + +rtnl_unlock (); +debugfs_init (cfv);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 20/58 PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
In reply to Greg Kroah-HartmanFrom: Miaoqian Lin <[email protected]>
commit f44b799603a9b5d2e375b0b2d54dd0b791eddfc2 upstream.
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. This function only calls of_node_put() in normal path, missing it in error paths.
Add missing of_node_put() to avoid refcount leak.
--- drivers/devfreq/event/exynos-ppmu.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/devfreq/event/exynos-ppmu.c +6 -2
@@ -514,15 +514,19 @@ static int of_get_devfreq_events(struct count =of_get_child_count (events_np); desc =devm_kcalloc (dev, count,sizeof (*desc),GFP_KERNEL ); -if (!desc) +if (!desc) { +of_node_put (events_np);return -ENOMEM ; + } info->num_events = count; of_id =of_match_device (exynos_ppmu_id_match, dev);if (of_id) info->ppmu_type = (enum exynos_ppmu_type )of_id->data; -else +else { +of_node_put (events_np);return -EINVAL ; + } j =0 ;for_each_child_of_node (events_np, node) {
Greg Kroah-Hartman
maintainerPATCH 21/58 s390: remove unneeded select BUILD_BIN2C
In reply to Greg Kroah-HartmanFrom: Masahiro Yamada <[email protected]>
commit 25deecb21c18ee29e3be8ac6177b2a9504c33d2d upstream.
Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"), s390 builds the purgatory without using bin2c.
Remove 'select BUILD_BIN2C' to avoid the unneeded build of bin2c.
--- arch/s390/Kconfig | 1 - 1 file changed, 1 deletion(-)
arch/s390/Kconfig +0 -1
@@ -541,7 +541,6 @@ config KEXEC config KEXEC_FILE bool "kexec file based system call" select KEXEC_CORE - select BUILD_BIN2C depends on CRYPTO depends on CRYPTO_SHA256 depends on CRYPTO_SHA256_S390
Greg Kroah-Hartman
maintainerPATCH 22/58 netfilter: nft_dynset: restore set element counter when failing to update
In reply to Greg Kroah-HartmanFrom: Pablo Neira Ayuso <[email protected]>
commit 05907f10e235680cc7fb196810e4ad3215d5e648 upstream.
This patch fixes a race condition.
nft_rhash_update() might fail for two reasons:
- Element already exists in the hashtable.
- Another packet won race to insert an entry in the hashtable.
In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter.
--- net/netfilter/nft_set_hash.c | 2 ++ 1 file changed, 2 insertions(+)
net/netfilter/nft_set_hash.c +2 -0
@@ -142,6 +142,7 @@ static bool nft_rhash_update(struct nft_/* Another cpu may race to insert the element with the same key */ if (prev) {nft_set_elem_destroy (set, he, true); +atomic_dec (&set->nelems); he = prev; }
@@ -151,6 +152,7 @@ out: err2:nft_set_elem_destroy (set, he, true); +atomic_dec (&set->nelems); err1:return false; }
Greg Kroah-Hartman
maintainerPATCH 23/58 net/sched: act_api: Notify user space if any actions were flushed before error
In reply to Greg Kroah-HartmanFrom: Victor Nogueira <[email protected]>
commit 76b39b94382f9e0a639e1c70c3253de248cc4c83 upstream.
If during an action flush operation one of the actions is still being referenced, the flush operation is aborted and the kernel returns to user space with an error. However, if the kernel was able to flush, for example, 3 actions and failed on the fourth, the kernel will not notify user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many actions were deleted before flush failed and by setting extack with a message describing what happened.
--- net/sched/act_api.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
net/sched/act_api.c +14 -8
@@ -287,7 +287,8 @@ static int tcf_idr_release_unsafe(struct }static int tcf_del_walker (struct tcf_idrinfo *idrinfo,struct sk_buff *skb, -const struct tc_action_ops *ops) +const struct tc_action_ops *ops, +struct netlink_ext_ack *extack) {struct nlattr *nest;int n_i =0 ;
@@ -303,20 +304,25 @@ static int tcf_del_walker(struct tcf_idrif (nla_put_string (skb,TCA_KIND , ops->kind)) goto nla_put_failure; + ret =0 ;mutex_lock (&idrinfo->lock);idr_for_each_entry_ul (idr, p, tmp, id) {if (IS_ERR (p))continue ; ret =tcf_idr_release_unsafe (p); -if (ret ==ACT_P_DELETED ) { +if (ret ==ACT_P_DELETED )module_put (ops->owner); - n_i++; - }else if (ret <0 ) { -mutex_unlock (&idrinfo->lock); - goto nla_put_failure; - } +else if (ret <0 ) +break ; + n_i++; }mutex_unlock (&idrinfo->lock); +if (ret <0 ) { +if (n_i) +NL_SET_ERR_MSG (extack,"Unable to flush all TC actions" ); +else + goto nla_put_failure; + } ret =nla_put_u32 (skb,TCA_FCNT , n_i);if (ret)
@@ -337,7 +343,7 @@ int tcf_generic_walker(struct tc_action_struct tcf_idrinfo *idrinfo = tn->idrinfo;if (type ==RTM_DELACTION ) { -return tcf_del_walker (idrinfo, skb, ops); +return tcf_del_walker (idrinfo, skb, ops, extack); }else if (type ==RTM_GETACTION ) {return tcf_dump_walker (idrinfo, skb, cb); }else {
Greg Kroah-Hartman
maintainerPATCH 24/58 net: bonding: fix possible NULL deref in rlb code
In reply to Greg Kroah-HartmanFrom: Eric Dumazet <[email protected]>
commit ab84db251c04d38b8dc7ee86e13d4050bedb1c88 upstream.
syzbot has two reports involving the same root cause.
bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected.
Report 1:
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK>
Report 2:
general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK>
--- drivers/net/bonding/bond_alb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_alb.c +1 -1
@@ -1276,12 +1276,12 @@ int bond_alb_initialize(struct bonding *return res;if (rlb_enabled) { - bond->alb_info.rlb_enabled =1 ; res =rlb_initialize (bond);if (res) {tlb_deinitialize (bond);return res; } + bond->alb_info.rlb_enabled =1 ; }else { bond->alb_info.rlb_enabled =0 ; }
Greg Kroah-Hartman
maintainerPATCH 25/58 net: bonding: fix use-after-free after 802.3ad slave unbind
In reply to Greg Kroah-HartmanFrom: Yevhen Orlov <[email protected]>
commit 050133e1aa2cb49bb17be847d48a4431598ef562 upstream.
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory.
Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg().
The KASAN logs are as follows:
[ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470
--- drivers/net/bonding/bond_3ad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_3ad.c +2 -1
@@ -2218,7 +2218,8 @@ void bond_3ad_unbind_slave(struct slave temp_aggregator->num_of_ports--;if (__agg_active_ports (temp_aggregator) ==0 ) { select_new_active_agg = temp_aggregator->is_active; -ad_clear_agg (temp_aggregator); +if (temp_aggregator->num_of_ports ==0 ) +ad_clear_agg (temp_aggregator);if (select_new_active_agg) {slave_info (bond->dev, slave->dev,"Removing an active aggregator\n" );/* select new active aggregator */
Greg Kroah-Hartman
maintainerPATCH 26/58 nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
commit 5a478a653b4cca148d5c89832f007ec0809d7e6d upstream.
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
--- drivers/nfc/nfcmrvl/i2c.c | 6 +++--- drivers/nfc/nfcmrvl/spi.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/nfc/nfcmrvl/i2c.c +3 -3
@@ -186,9 +186,9 @@ static int nfcmrvl_i2c_parse_dt(struct d pdata->irq_polarity =IRQF_TRIGGER_RISING ; ret =irq_of_parse_and_map (node,0 ); -if (ret <0 ) { -pr_err ("Unable to get irq, error: %d\n" , ret); -return ret; +if (!ret) { +pr_err ("Unable to get irq\n" ); +return -EINVAL ; } pdata->irq = ret;
drivers/nfc/nfcmrvl/spi.c +3 -3
@@ -129,9 +129,9 @@ static int nfcmrvl_spi_parse_dt(struct d } ret =irq_of_parse_and_map (node,0 ); -if (ret <0 ) { -pr_err ("Unable to get irq, error: %d\n" , ret); -return ret; +if (!ret) { +pr_err ("Unable to get irq\n" ); +return -EINVAL ; } pdata->irq = ret;
Greg Kroah-Hartman
maintainerPATCH 27/58 NFC: nxp-nci: Dont issue a zero length i2c_master_read()
In reply to Greg Kroah-HartmanFrom: Michael Walle <[email protected]>
commit eddd95b9423946aaacb55cac6a9b2cea8ab944fc upstream.
There are packets which doesn't have a payload. In that case, the second i2c_master_read() will have a zero length. But because the NFC controller doesn't have any data left, it will NACK the I2C read and -ENXIO will be returned. In case there is no payload, just skip the second i2c master read.
--- drivers/nfc/nxp-nci/i2c.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/nfc/nxp-nci/i2c.c +3 -0
@@ -162,6 +162,9 @@ static int nxp_nci_i2c_nci_read(struct nskb_put_data (*skb, (void *)&header,NCI_CTRL_HDR_SIZE ); +if (!header.plen) +return 0 ; + r =i2c_master_recv (client,skb_put (*skb, header.plen), header.plen);if (r != header.plen) { nfc_err(&client->dev,
Greg Kroah-Hartman
maintainerPATCH 28/58 net: tun: avoid disabling NAPI twice
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
commit ff1fa2081d173b01cebe2fbf0a2d0f1cee9ce4b5 upstream.
Eric reports that syzbot made short work out of my speculative fix. Indeed when queue gets detached its tfile->tun remains, so we would try to stop NAPI twice with a detach(), close() sequence.
Alternative fix would be to move tun_napi_disable() to tun_detach_all() and let the NAPI run after the queue has been detached.
--- drivers/net/tun.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/tun.c +2 -1
@@ -696,7 +696,8 @@ static void __tun_detach(struct tun_file tun =rtnl_dereference (tfile->tun);if (tun && clean) { -tun_napi_disable (tfile); +if (!tfile->detached) +tun_napi_disable (tfile);tun_napi_del (tfile); }
Greg Kroah-Hartman
maintainerPATCH 29/58 xen/gntdev: Avoid blocking in unmap_grant_pages()
In reply to Greg Kroah-HartmanFrom: Demi Marie Obenour <[email protected]>
commit dbe97cff7dd9f0f75c524afdd55ad46be3d15295 upstream.
unmap_grant_pages() currently waits for the pages to no longer be used. In https://github.com/QubesOS/qubes-issues/issues/7481, this lead to a deadlock against i915: i915 was waiting for gntdev's MMU notifier to finish, while gntdev was waiting for i915 to free its pages. I also believe this is responsible for various deadlocks I have experienced in the past.
Avoid these problems by making unmap_grant_pages async. This requires making it return void, as any errors will not be available when the function returns. Fortunately, the only use of the return value is a WARN_ON(), which can be replaced by a WARN_ON when the error is detected. Additionally, a failed call will not prevent further calls from being made, but this is harmless.
Because unmap_grant_pages is now async, the grant handle will be sent to INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same handle. Instead, a separate bool array is allocated for this purpose. This wastes memory, but stuffing this information in padding bytes is too fragile. Furthermore, it is necessary to grab a reference to the map before making the asynchronous call, and release the reference when the call returns.
It is also necessary to guard against reentrancy in gntdev_map_put(), and to handle the case where userspace tries to map a mapping whose contents have not all been freed yet.
--- drivers/xen/gntdev-common.h | 8 ++ drivers/xen/gntdev.c | 147 ++++++++++++++++++++++++++++++-------------- 2 files changed, 110 insertions(+), 45 deletions(-)
drivers/xen/gntdev-common.h +8 -0
@@ -15,6 +15,8 @@#include <linux/mman.h> #include <linux/mmu_notifier.h> #include <linux/types.h> +#include <xen/interface/event_channel.h> +#include <xen/grant_table.h> struct gntdev_dmabuf_priv ;
@@ -61,6 +63,7 @@ struct gntdev_grant_map {struct gnttab_unmap_grant_ref *unmap_ops;struct gnttab_map_grant_ref *kmap_ops;struct gnttab_unmap_grant_ref *kunmap_ops; +bool *being_removed;struct page **pages;unsigned long pages_vm_start;
@@ -78,6 +81,11 @@ struct gntdev_grant_map {/* Needed to avoid allocation in gnttab_dma_free_pages(). */ xen_pfn_t *frames;#endif + +/* Number of live grants */ +atomic_t live_grants; +/* Needed to avoid allocation in __unmap_grant_pages */ +struct gntab_unmap_queue_data unmap_data; }; struct gntdev_grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count,
drivers/xen/gntdev.c +102 -45
282 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 30/58 hwmon: (ibmaem) dont call platform_device_del() if platform_device_add() fails
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit d0e51022a025ca5350fafb8e413a6fe5d4baf833 ]
If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately.
--- drivers/hwmon/ibmaem.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/hwmon/ibmaem.c +8 -4
@@ -550,7 +550,7 @@ static int aem_init_aem1_inst(struct aem res =platform_device_add (data->pdev);if (res) - goto ipmi_err; + goto dev_add_err;platform_set_drvdata (data->pdev, data);
@@ -598,7 +598,9 @@ hwmon_reg_err:ipmi_destroy_user (data->ipmi.user); ipmi_err:platform_set_drvdata (data->pdev,NULL ); -platform_device_unregister (data->pdev); +platform_device_del (data->pdev); +dev_add_err: +platform_device_put (data->pdev); dev_err:ida_simple_remove (&aem_ida, data->id); id_err:
@@ -690,7 +692,7 @@ static int aem_init_aem2_inst(struct aem res =platform_device_add (data->pdev);if (res) - goto ipmi_err; + goto dev_add_err;platform_set_drvdata (data->pdev, data);
@@ -738,7 +740,9 @@ hwmon_reg_err:ipmi_destroy_user (data->ipmi.user); ipmi_err:platform_set_drvdata (data->pdev,NULL ); -platform_device_unregister (data->pdev); +platform_device_del (data->pdev); +dev_add_err: +platform_device_put (data->pdev); dev_err:ida_simple_remove (&aem_ida, data->id); id_err:
Greg Kroah-Hartman
maintainerPATCH 31/58 net: dsa: bcm_sf2: force pause link settings
In reply to Greg Kroah-HartmanFrom: Doug Berger <[email protected]>
commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream.
The pause settings reported by the PHY should also be applied to the GMII port status override otherwise the switch will not generate pause frames towards the link partner despite the advertisement saying otherwise.
--- drivers/net/dsa/bcm_sf2.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/dsa/bcm_sf2.c +5 -0
@@ -602,6 +602,11 @@ force_link: reg |=LINK_STS ;if (state->duplex ==DUPLEX_FULL ) reg |=DUPLX_MODE ; +if (state->pause &MLO_PAUSE_TXRX_MASK ) { +if (state->pause &MLO_PAUSE_TX ) + reg |=TXFLOW_CNTL ; + reg |=RXFLOW_CNTL ; + }core_writel (priv, reg, offset); }
Greg Kroah-Hartman
maintainerPATCH 32/58 sit: use min
In reply to Greg Kroah-HartmanFrom: kernel test robot <[email protected]>
commit 284fda1eff8a8b27d2cafd7dc8fb423d13720f21 upstream.
Opportunity for min()
Generated by: scripts/coccinelle/misc/minmax.cocci
--- net/ipv6/sit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv6/sit.c +1 -1
@@ -312,7 +312,7 @@ static int ipip6_tunnel_get_prl(struct ircu_read_lock (); - ca = t->prl_count < cmax ? t->prl_count : cmax; + ca =min (t->prl_count, cmax);if (!kp) {/* We don't try hard to allocate much memory for
Greg Kroah-Hartman
maintainerPATCH 33/58 ipv6/sit: fix ipip6_tunnel_get_prl return value
In reply to Greg Kroah-HartmanFrom: katrinzhou <[email protected]>
commit adabdd8f6acabc0c3fdbba2e7f5a2edd9c5ef22d upstream.
When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly.
Addresses-Coverity: ("Unused value")
--- net/ipv6/sit.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
net/ipv6/sit.c +3 -5
@@ -310,8 +310,6 @@ static int ipip6_tunnel_get_prl(struct i kcalloc(cmax, sizeof(*kp), GFP_KERNEL | __GFP_NOWARN) : NULL; -rcu_read_lock (); - ca =min (t->prl_count, cmax);if (!kp) {
@@ -327,7 +325,7 @@ static int ipip6_tunnel_get_prl(struct i } } - c =0 ; +rcu_read_lock ();for_each_prl_rcu (t->prl) {if (c >= cmax)break ;
@@ -339,7 +337,7 @@ static int ipip6_tunnel_get_prl(struct iif (kprl.addr !=htonl (INADDR_ANY ))break ; } -out: +rcu_read_unlock (); len =sizeof (*kp) * c;
@@ -348,7 +346,7 @@ out: ret = -EFAULT ;kfree (kp); - +out:return ret; }
Greg Kroah-Hartman
maintainerPATCH 34/58 rseq/selftests,x86_64: Add rseq_offset_deref_addv()
In reply to Greg Kroah-HartmanFrom: Peter Oskolkov <[email protected]>
commit ea366dd79c05fcd4cf5e225d2de8a3a7c293160c upstream.
This patch adds rseq_offset_deref_addv() function to tools/testing/selftests/rseq/rseq-x86.h, to be used in a selftest in the next patch in the patchset.
Once an architecture adds support for this function they should define "RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV".
--- tools/testing/selftests/rseq/rseq-x86.h | 57 ++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
tools/testing/selftests/rseq/rseq-x86.h +57 -0
@@ -279,6 +279,63 @@ error1:#endif } +#define RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV + +/* +* pval = *(ptr+off) +* *pval += inc; +*/ +static inline __attribute__((always_inline)) +int rseq_offset_deref_addv (intptr_t *ptr,off_t off,intptr_t inc,int cpu) +{ + RSEQ_INJECT_C(9) + + __asm__ __volatile__ goto ( + RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif +/* Start rseq by storing table entry pointer into rseq_cs. */ + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_INJECT_ASM(3) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) +#endif +/* get p+v */ +"movq %[ptr], %%rbx\n\t" +"addq %[off], %%rbx\n\t" +/* get pv */ +"movq (%%rbx), %%rcx\n\t" +/* *pv += inc */ +"addq %[inc], (%%rcx)\n\t" +"2:\n\t" + RSEQ_INJECT_ASM(4) +RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) + : /* gcc asm goto does not allow outputs */ + : [cpu_id] "r" (cpu), + [rseq_abi] "r" (&__rseq_abi), +/* final store input */ + [ptr] "m" (*ptr), + [off] "er" (off), + [inc] "er" (inc) + : "memory", "cc", "rax", "rbx", "rcx" + RSEQ_INJECT_CLOBBER + : abort +#ifdef RSEQ_COMPARE_TWICE + , error1 +#endif + ); +return 0 ; +abort: +RSEQ_INJECT_FAILED + return -1; +#ifdef RSEQ_COMPARE_TWICE +error1: +rseq_bug ("cpu_id comparison failed" ); +#endif +} + static inline __attribute__((always_inline)) int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, intptr_t *v2, intptr_t newv2,
Greg Kroah-Hartman
maintainerPATCH 35/58 selftests/rseq: remove ARRAY_SIZE define from individual tests
In reply to Greg Kroah-HartmanFrom: Shuah Khan <[email protected]>
commit 07ad4f7629d4802ff0d962b0ac23ea6445964e2a upstream.
ARRAY_SIZE is defined in several selftests. Remove definitions from individual test files and include header file for the define instead. ARRAY_SIZE define is added in a separate patch to prepare for this change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in kselftest.h.
--- tools/testing/selftests/rseq/basic_percpu_ops_test.c | 3 +-- tools/testing/selftests/rseq/rseq.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-)
tools/testing/selftests/rseq/basic_percpu_ops_test.c +1 -2
@@ -9,10 +9,9 @@#include <string.h> #include <stddef.h> +#include "../kselftest.h" #include "rseq.h" -#define ARRAY_SIZE (arr) (sizeof(arr) / sizeof((arr)[0])) -struct percpu_lock_entry {intptr_t v; } __attribute__((aligned (128 )));
tools/testing/selftests/rseq/rseq.c +1 -2
@@ -27,10 +27,9 @@#include <signal.h> #include <limits.h> +#include "../kselftest.h" #include "rseq.h" -#define ARRAY_SIZE (arr) (sizeof(arr) / sizeof((arr)[0])) - __threadvolatile struct rseq __rseq_abi = { .cpu_id =RSEQ_CPU_ID_UNINITIALIZED , };
Greg Kroah-Hartman
maintainerPATCH 36/58 selftests/rseq: introduce own copy of rseq uapi header
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 5c105d55a9dc9e01535116ccfc26e703168a574f upstream.
The Linux kernel rseq uapi header has a broken layout for the rseq_cs.ptr field on 32-bit little endian architectures. The entire rseq_cs.ptr field is planned for removal, leaving only the 64-bit rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi header, where they introduce proper union fields to access to the 32-bit low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel selftests.
--- tools/testing/selftests/rseq/rseq-abi.h | 151 ++++++++++++++++++++++++++++++++ tools/testing/selftests/rseq/rseq.c | 14 +- tools/testing/selftests/rseq/rseq.h | 10 -- 3 files changed, 161 insertions(+), 14 deletions(-) create mode 100644 tools/testing/selftests/rseq/rseq-abi.h
tools/testing/selftests/rseq/rseq-abi.h new file +151 -0
@@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +#ifndef _RSEQ_ABI_H +#define _RSEQ_ABI_H + +/* +* rseq-abi.h +* +* Restartable sequences system call API +* +* Copyright (c) 2015-2022 Mathieu Desnoyers <[email protected]> +*/ + +#include <linux/types.h> +#include <asm/byteorder.h> + +enum rseq_abi_cpu_id_state { +RSEQ_ABI_CPU_ID_UNINITIALIZED =-1 , +RSEQ_ABI_CPU_ID_REGISTRATION_FAILED =-2 , +}; + +enum rseq_abi_flags { +RSEQ_ABI_FLAG_UNREGISTER = (1 <<0 ), +}; + +enum rseq_abi_cs_flags_bit { +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT =0 , +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT =1 , +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT =2 , +}; + +enum rseq_abi_cs_flags { +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT = + (1U <<RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT ), +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL = + (1U <<RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT ), +RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE = + (1U <<RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT ), +}; + +/* +* struct rseq_abi_cs is aligned on 4 * 8 bytes to ensure it is always +* contained within a single cache-line. It is usually declared as +* link-time constant data. +*/ +struct rseq_abi_cs { +/* Version of this structure. */ +__u32 version; +/* enum rseq_abi_cs_flags */ +__u32 flags; +__u64 start_ip; +/* Offset from start_ip. */ +__u64 post_commit_offset; +__u64 abort_ip; +} __attribute__((aligned (4 *sizeof (__u64)))); + +/* +* struct rseq_abi is aligned on 4 * 8 bytes to ensure it is always +* contained within a single cache-line. +* +* A single struct rseq_abi per thread is allowed. +*/ +struct rseq_abi { +/* +* Restartable sequences cpu_id_start field. Updated by the +* kernel. Read by user-space with single-copy atomicity +* semantics. This field should only be read by the thread which +* registered this data structure. Aligned on 32-bit. Always +* contains a value in the range of possible CPUs, although the +* value may not be the actual current CPU (e.g. if rseq is not +* initialized). This CPU number value should always be compared +* against the value of the cpu_id field before performing a rseq +* commit or returning a value read from a data structure indexed +* using the cpu_id_start value. +*/ +__u32 cpu_id_start; +/* +* Restartable sequences cpu_id field. Updated by the kernel. +* Read by user-space with single-copy atomicity semantics. This +* field should only be read by the thread which registered this +* data structure. Aligned on 32-bit. Values +* RSEQ_CPU_ID_UNINITIALIZED and RSEQ_CPU_ID_REGISTRATION_FAILED +* have a special semantic: the former means "rseq uninitialized", +* and latter means "rseq initialization failed". This value is +* meant to be read within rseq critical sections and compared +* with the cpu_id_start value previously read, before performing +* the commit instruction, or read and compared with the +* cpu_id_start value before returning a value loaded from a data +* structure indexed using the cpu_id_start value. +*/ +__u32 cpu_id; +/* +* Restartable sequences rseq_cs field. +* +* Contains NULL when no critical section is active for the current +* thread, or holds a pointer to the currently active struct rseq_cs. +* +* Updated by user-space, which sets the address of the currently +* active rseq_cs at the beginning of assembly instruction sequence +* block, and set to NULL by the kernel when it restarts an assembly +* instruction sequence block, as well as when the kernel detects that +* it is preempting or delivering a signal outside of the range +* targeted by the rseq_cs. Also needs to be set to NULL by user-space +* before reclaiming memory that contains the targeted struct rseq_cs. +* +* Read and set by the kernel. Set by user-space with single-copy +* atomicity semantics. This field should only be updated by the +* thread which registered this data structure. Aligned on 64-bit. +*/ +union { +__u64 ptr64; + +/* +* The "arch" field provides architecture accessor for +* the ptr field based on architecture pointer size and +* endianness. +*/ +struct { +#ifdef __LP64__ +__u64 ptr; +#elif defined(__BYTE_ORDER) ? (__BYTE_ORDER == __BIG_ENDIAN) : defined(__BIG_ENDIAN) +__u32 padding;/* Initialized to zero. */ +__u32 ptr; +#else +__u32 ptr; +__u32 padding;/* Initialized to zero. */ +#endif + } arch; + } rseq_cs; + +/* +* Restartable sequences flags field. +* +* This field should only be updated by the thread which +* registered this data structure. Read by the kernel. +* Mainly used for single-stepping through rseq critical sections +* with debuggers. +* +* - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT +* Inhibit instruction sequence block restart on preemption +* for this thread. +* - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL +* Inhibit instruction sequence block restart on signal +* delivery for this thread. +* - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE +* Inhibit instruction sequence block restart on migration for +* this thread. +*/ +__u32 flags; +} __attribute__((aligned (4 *sizeof (__u64)))); + +#endif /* _RSEQ_ABI_H */
tools/testing/selftests/rseq/rseq.c +7 -7
@@ -30,8 +30,8 @@#include "../kselftest.h" #include "rseq.h" -__threadvolatile struct rseq __rseq_abi = { - .cpu_id =RSEQ_CPU_ID_UNINITIALIZED , +__threadvolatile struct rseq_abi __rseq_abi = { + .cpu_id =RSEQ_ABI_CPU_ID_UNINITIALIZED , };/*
@@ -66,7 +66,7 @@ static void signal_restore(sigset_t oldsabort (); } -static int sys_rseq (volatile struct rseq *rseq_abi,uint32_t rseq_len, +static int sys_rseq (volatile struct rseq_abi *rseq_abi,uint32_t rseq_len,int flags,uint32_t sig) {return syscall (__NR_rseq, rseq_abi, rseq_len, flags, sig);
@@ -86,13 +86,13 @@ int rseq_register_current_thread(void) }if (__rseq_refcount++) goto end; - rc =sys_rseq (&__rseq_abi,sizeof (struct rseq ),0 ,RSEQ_SIG ); + rc =sys_rseq (&__rseq_abi,sizeof (struct rseq_abi ),0 ,RSEQ_SIG );if (!rc) {assert (rseq_current_cpu_raw () >=0 ); goto end; }if (errno !=EBUSY ) - __rseq_abi.cpu_id =RSEQ_CPU_ID_REGISTRATION_FAILED ; + __rseq_abi.cpu_id =RSEQ_ABI_CPU_ID_REGISTRATION_FAILED ; ret =-1 ; __rseq_refcount--; end:
@@ -114,8 +114,8 @@ int rseq_unregister_current_thread(void) }if (--__rseq_refcount) goto end; - rc =sys_rseq (&__rseq_abi,sizeof (struct rseq ), -RSEQ_FLAG_UNREGISTER ,RSEQ_SIG ); + rc =sys_rseq (&__rseq_abi,sizeof (struct rseq_abi ), +RSEQ_ABI_FLAG_UNREGISTER ,RSEQ_SIG );if (!rc) goto end; __rseq_refcount =1 ;
tools/testing/selftests/rseq/rseq.h +3 -7
@@ -16,7 +16,7 @@#include <errno.h> #include <stdio.h> #include <stdlib.h> -#include <linux/rseq.h> +#include "rseq-abi.h" /* * Empty code injection macros, override when testing.
@@ -43,7 +43,7 @@#define RSEQ_INJECT_FAILED #endif -extern __threadvolatile struct rseq __rseq_abi; +extern __threadvolatile struct rseq_abi __rseq_abi;extern int __rseq_handled;#define rseq_likely (x) __builtin_expect(!!(x), 1)
@@ -139,11 +139,7 @@ static inline uint32_t rseq_current_cpu(static inline void rseq_clear_rseq_cs (void ) { -#ifdef __LP64__ - __rseq_abi.rseq_cs.ptr =0 ; -#else - __rseq_abi.rseq_cs.ptr.ptr32 =0 ; -#endif + __rseq_abi.rseq_cs.arch.ptr =0 ; }/*
Greg Kroah-Hartman
maintainerPATCH 37/58 selftests/rseq: Remove useless assignment to cpu variable
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 930378d056eac2c96407b02aafe4938d0ac9cc37 upstream.
--- tools/testing/selftests/rseq/param_test.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
tools/testing/selftests/rseq/param_test.c +1 -3
@@ -366,9 +366,7 @@ void *test_percpu_spinlock_thread(void *abort (); reps = thread_data->reps;for (i =0 ; i < reps; i++) { -int cpu =rseq_cpu_start (); - - cpu =rseq_this_cpu_lock (&data->lock); +int cpu =rseq_this_cpu_lock (&data->lock); data->c[cpu].count++;rseq_percpu_unlock (&data->lock, cpu);#ifndef BENCHMARK
Greg Kroah-Hartman
maintainerPATCH 38/58 selftests/rseq: Remove volatile from __rseq_abi
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 94b80a19ebfe347a01301d750040a61c38200e2b upstream.
This is done in preparation for the selftest uplift to become compatible with glibc-2.35.
All accesses to the __rseq_abi fields are volatile, but remove the volatile from the TLS variable declaration, otherwise we are stuck with volatile for the upcoming rseq_get_abi() helper.
--- tools/testing/selftests/rseq/rseq.c | 4 ++-- tools/testing/selftests/rseq/rseq.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
tools/testing/selftests/rseq/rseq.c +2 -2
@@ -30,7 +30,7 @@#include "../kselftest.h" #include "rseq.h" -__threadvolatile struct rseq_abi __rseq_abi = { +__threadstruct rseq_abi __rseq_abi = { .cpu_id =RSEQ_ABI_CPU_ID_UNINITIALIZED , };
@@ -92,7 +92,7 @@ int rseq_register_current_thread(void) goto end; }if (errno !=EBUSY ) - __rseq_abi.cpu_id =RSEQ_ABI_CPU_ID_REGISTRATION_FAILED ; +RSEQ_WRITE_ONCE (__rseq_abi.cpu_id,RSEQ_ABI_CPU_ID_REGISTRATION_FAILED ); ret =-1 ; __rseq_refcount--; end:
tools/testing/selftests/rseq/rseq.h +2 -2
@@ -43,7 +43,7 @@#define RSEQ_INJECT_FAILED #endif -extern __threadvolatile struct rseq_abi __rseq_abi; +extern __threadstruct rseq_abi __rseq_abi;extern int __rseq_handled;#define rseq_likely (x) __builtin_expect(!!(x), 1)
@@ -139,7 +139,7 @@ static inline uint32_t rseq_current_cpu(static inline void rseq_clear_rseq_cs (void ) { - __rseq_abi.rseq_cs.arch.ptr =0 ; +RSEQ_WRITE_ONCE (__rseq_abi.rseq_cs.arch.ptr,0 ); }/*
Greg Kroah-Hartman
maintainerPATCH 39/58 selftests/rseq: Introduce rseq_get_abi() helper
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit e546cd48ccc456074ddb8920732aef4af65d7ca7 upstream.
This is done in preparation for the selftest uplift to become compatible with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer, rather than through an actual Thread-Local Storage (TLS) variable, as the kernel selftests initially expected.
Introduce a rseq_get_abi() helper, initially using the __rseq_abi TLS variable, in preparation for changing this userspace ABI for one which is compatible with glibc-2.35.
Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot actively coexist in a process, because the kernel supports only a single rseq registration per thread.
--- tools/testing/selftests/rseq/rseq-arm.h | 32 +++++++++++++++--------------- tools/testing/selftests/rseq/rseq-arm64.h | 32 +++++++++++++++--------------- tools/testing/selftests/rseq/rseq-mips.h | 32 +++++++++++++++--------------- tools/testing/selftests/rseq/rseq-ppc.h | 32 +++++++++++++++--------------- tools/testing/selftests/rseq/rseq-s390.h | 24 +++++++++++----------- tools/testing/selftests/rseq/rseq-x86.h | 30 ++++++++++++++-------------- tools/testing/selftests/rseq/rseq.h | 11 +++++++--- 7 files changed, 99 insertions(+), 94 deletions(-)
tools/testing/selftests/rseq/rseq-arm.h +16 -16
@@ -185,8 +185,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -255,8 +255,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -316,8 +316,8 @@ int rseq_addv(intptr_t *v, intptr_t coun"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [count] "Ir" (count)RSEQ_INJECT_INPUT
@@ -381,8 +381,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -457,8 +457,8 @@ int rseq_cmpeqv_trystorev_storev_release"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -537,8 +537,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -657,8 +657,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_"8:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -782,8 +782,8 @@ int rseq_cmpeqv_trymemcpy_storev_release"8:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-arm64.h +16 -16
@@ -230,8 +230,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "Qo" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -287,8 +287,8 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "Qo" (*v), [expectnot] "r" (expectnot), [load] "Qo" (*load),
@@ -337,8 +337,8 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "Qo" (*v), [count] "r" (count)RSEQ_INJECT_INPUT
@@ -388,8 +388,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -447,8 +447,8 @@ int rseq_cmpeqv_trystorev_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -508,8 +508,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "Qo" (*v), [expect] "r" (expect), [v2] "Qo" (*v2),
@@ -569,8 +569,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -629,8 +629,8 @@ int rseq_cmpeqv_trymemcpy_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "Qo" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
tools/testing/selftests/rseq/rseq-mips.h +16 -16
@@ -190,8 +190,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -258,8 +258,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -319,8 +319,8 @@ int rseq_addv(intptr_t *v, intptr_t coun"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [count] "Ir" (count)RSEQ_INJECT_INPUT
@@ -382,8 +382,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -456,8 +456,8 @@ int rseq_cmpeqv_trystorev_storev_release"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -532,8 +532,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *"5:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -649,8 +649,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_"8:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -771,8 +771,8 @@ int rseq_cmpeqv_trymemcpy_storev_release"8:\n\t" : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-ppc.h +16 -16
@@ -235,8 +235,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -301,8 +301,8 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -359,8 +359,8 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [count] "r" (count)
@@ -419,8 +419,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -489,8 +489,8 @@ int rseq_cmpeqv_trystorev_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -560,8 +560,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -635,8 +635,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -711,8 +711,8 @@ int rseq_cmpeqv_trymemcpy_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-s390.h +12 -12
@@ -165,8 +165,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -233,8 +233,8 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -288,8 +288,8 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [count] "r" (count)
@@ -347,8 +347,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -426,8 +426,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -534,8 +534,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [current_cpu_id] "m" (rseq_get_abi()->cpu_id), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-x86.h +15 -15
@@ -141,7 +141,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -207,7 +207,7 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -258,7 +258,7 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [count] "er" (count)
@@ -314,7 +314,7 @@ int rseq_offset_deref_addv(intptr_t *ptrRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [ptr] "m" (*ptr), [off] "er" (off),
@@ -372,7 +372,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -449,7 +449,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -555,7 +555,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -719,7 +719,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -785,7 +785,7 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -836,7 +836,7 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [count] "ir" (count)
@@ -894,7 +894,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* try store input */ [v2] "m" (*v2), [newv2] "m" (newv2),
@@ -962,7 +962,7 @@ int rseq_cmpeqv_trystorev_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -1032,7 +1032,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -1142,7 +1142,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [expect] "m" (expect),
@@ -1255,7 +1255,7 @@ int rseq_cmpeqv_trymemcpy_storev_release#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (&__rseq_abi), + [rseq_abi] "r" (rseq_get_abi()), /* final store input */ [v] "m" (*v), [expect] "m" (expect),
tools/testing/selftests/rseq/rseq.h +8 -3
@@ -46,6 +46,11 @@extern __threadstruct rseq_abi __rseq_abi;extern int __rseq_handled; +static inline struct rseq_abi *rseq_get_abi (void ) +{ +return &__rseq_abi; +} +#define rseq_likely (x) __builtin_expect(!!(x), 1)#define rseq_unlikely (x) __builtin_expect(!!(x), 0)#define rseq_barrier () __asm__ __volatile__("" : : : "memory")
@@ -108,7 +113,7 @@ int32_t rseq_fallback_current_cpu(void);*/ static inline int32_t rseq_current_cpu_raw (void ) { -return RSEQ_ACCESS_ONCE (__rseq_abi.cpu_id); +return RSEQ_ACCESS_ONCE (rseq_get_abi ()->cpu_id); }/*
@@ -124,7 +129,7 @@ static inline int32_t rseq_current_cpu_r*/ static inline uint32_t rseq_cpu_start (void ) { -return RSEQ_ACCESS_ONCE (__rseq_abi.cpu_id_start); +return RSEQ_ACCESS_ONCE (rseq_get_abi ()->cpu_id_start); }static inline uint32_t rseq_current_cpu (void )
@@ -139,7 +144,7 @@ static inline uint32_t rseq_current_cpu(static inline void rseq_clear_rseq_cs (void ) { -RSEQ_WRITE_ONCE (__rseq_abi.rseq_cs.arch.ptr,0 ); +RSEQ_WRITE_ONCE (rseq_get_abi ()->rseq_cs.arch.ptr,0 ); }/*
Greg Kroah-Hartman
maintainerPATCH 40/58 selftests/rseq: Introduce thread pointer getters
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 886ddfba933f5ce9d76c278165d834d114ba4ffc upstream.
This is done in preparation for the selftest uplift to become compatible with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer.
The toolchains do not implement accessing the thread pointer on all architectures. Provide thread pointer getters for ppc and x86 which lack (or lacked until recently) toolchain support.
--- tools/testing/selftests/rseq/rseq-generic-thread-pointer.h | 25 ++++++++ tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h | 30 +++++++++ tools/testing/selftests/rseq/rseq-thread-pointer.h | 19 ++++++ tools/testing/selftests/rseq/rseq-x86-thread-pointer.h | 40 +++++++++++++ 4 files changed, 114 insertions(+) create mode 100644 tools/testing/selftests/rseq/rseq-generic-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-thread-pointer.h create mode 100644 tools/testing/selftests/rseq/rseq-x86-thread-pointer.h
tools/testing/selftests/rseq/rseq-generic-thread-pointer.h new file +25 -0
@@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */ +/* +* rseq-generic-thread-pointer.h +* +* (C) Copyright 2021 - Mathieu Desnoyers <[email protected]> +*/ + +#ifndef _RSEQ_GENERIC_THREAD_POINTER +#define _RSEQ_GENERIC_THREAD_POINTER + +#ifdef __cplusplus +extern "C" { +#endif + +/* Use gcc builtin thread pointer. */ +static inline void *rseq_thread_pointer (void ) +{ +return __builtin_thread_pointer (); +} + +#ifdef __cplusplus +} +#endif + +#endif
tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h new file +30 -0
@@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */ +/* +* rseq-ppc-thread-pointer.h +* +* (C) Copyright 2021 - Mathieu Desnoyers <[email protected]> +*/ + +#ifndef _RSEQ_PPC_THREAD_POINTER +#define _RSEQ_PPC_THREAD_POINTER + +#ifdef __cplusplus +extern "C" { +#endif + +static inline void *rseq_thread_pointer (void ) +{ +#ifdef __powerpc64__ + registervoid *__result asm ("r13" ); +#else + registervoid *__result asm ("r2" ); +#endif + asm ("" :"=r" (__result)); +return __result; +} + +#ifdef __cplusplus +} +#endif + +#endif
tools/testing/selftests/rseq/rseq-thread-pointer.h new file +19 -0
@@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */ +/* +* rseq-thread-pointer.h +* +* (C) Copyright 2021 - Mathieu Desnoyers <[email protected]> +*/ + +#ifndef _RSEQ_THREAD_POINTER +#define _RSEQ_THREAD_POINTER + +#if defined(__x86_64__) || defined(__i386__) +#include "rseq-x86-thread-pointer.h" +#elif defined(__PPC__) +#include "rseq-ppc-thread-pointer.h" +#else +#include "rseq-generic-thread-pointer.h" +#endif + +#endif
tools/testing/selftests/rseq/rseq-x86-thread-pointer.h new file +40 -0
@@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */ +/* +* rseq-x86-thread-pointer.h +* +* (C) Copyright 2021 - Mathieu Desnoyers <[email protected]> +*/ + +#ifndef _RSEQ_X86_THREAD_POINTER +#define _RSEQ_X86_THREAD_POINTER + +#include <features.h> + +#ifdef __cplusplus +extern "C" { +#endif + +#if __GNUC_PREREQ (11 ,1 ) +static inline void *rseq_thread_pointer (void ) +{ +return __builtin_thread_pointer (); +} +#else +static inline void *rseq_thread_pointer (void ) +{ +void *__result; + +# ifdef __x86_64__ + __asm__ ("mov %%fs:0, %0" :"=r" (__result)); +# else + __asm__ ("mov %%gs:0, %0" :"=r" (__result)); +# endif +return __result; +} +#endif /* !GCC 11 */ + +#ifdef __cplusplus +} +#endif + +#endif
Greg Kroah-Hartman
maintainerPATCH 41/58 selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 233e667e1ae3e348686bd9dd0172e62a09d852e1 upstream.
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread data in the TCB, accessible at an offset from the thread pointer, rather than through an actual Thread-Local Storage (TLS) variable, as the Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot actively coexist in a process, because the kernel supports only a single rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size, __rseq_flags) using dlsym() in a librseq library constructor. If those are found, copy their values into rseq_offset, rseq_size, and rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration from librseq and use its own IE-model TLS to implement the rseq ABI per-thread storage.
--- tools/testing/selftests/rseq/Makefile | 2 tools/testing/selftests/rseq/rseq.c | 161 ++++++++++++++++------------------ tools/testing/selftests/rseq/rseq.h | 13 ++ 3 files changed, 88 insertions(+), 88 deletions(-)
tools/testing/selftests/rseq/Makefile +1 -1
@@ -6,7 +6,7 @@ endif CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L$(OUTPUT) -Wl,-rpath=./ \ $(CLANG_FLAGS) -LDLIBS += -lpthread +LDLIBS += -lpthread -ldl # Own dependencies because we only want to build against 1st prerequisite, but # still track changes to header files and depend on shared object.
tools/testing/selftests/rseq/rseq.c +77 -84
200 lines not on this page · raw message
tools/testing/selftests/rseq/rseq.h +10 -3
@@ -43,12 +43,19 @@#define RSEQ_INJECT_FAILED #endif -extern __threadstruct rseq_abi __rseq_abi; -extern int __rseq_handled; +#include "rseq-thread-pointer.h" + +/* Offset from the thread pointer to the rseq area. */ +extern int rseq_offset; +/* Size of the registered rseq area. 0 if the registration was +unsuccessful. */ +extern unsigned int rseq_size; +/* Flags used during rseq registration. */ +extern unsigned int rseq_flags;static inline struct rseq_abi *rseq_get_abi (void ) { -return &__rseq_abi; +return (struct rseq_abi *) ((uintptr_t )rseq_thread_pointer () + rseq_offset); }#define rseq_likely (x) __builtin_expect(!!(x), 1)
Greg Kroah-Hartman
maintainerPATCH 42/58 selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 24d1136a29da5953de5c0cbc6c83eb62a1e0bf14 upstream.
ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by using the rseq_cs.arch.ptr field.
Use this field across all architectures.
--- tools/testing/selftests/rseq/rseq-arm.h | 16 ++++++++-------- tools/testing/selftests/rseq/rseq-arm64.h | 16 ++++++++-------- tools/testing/selftests/rseq/rseq-mips.h | 16 ++++++++-------- tools/testing/selftests/rseq/rseq-ppc.h | 16 ++++++++-------- tools/testing/selftests/rseq/rseq-s390.h | 12 ++++++------ 5 files changed, 38 insertions(+), 38 deletions(-)
tools/testing/selftests/rseq/rseq-arm.h +8 -8
@@ -186,7 +186,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -256,7 +256,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -317,7 +317,7 @@ int rseq_addv(intptr_t *v, intptr_t coun : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [count] "Ir" (count)RSEQ_INJECT_INPUT
@@ -382,7 +382,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -458,7 +458,7 @@ int rseq_cmpeqv_trystorev_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -538,7 +538,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -658,7 +658,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -783,7 +783,7 @@ int rseq_cmpeqv_trymemcpy_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-arm64.h +8 -8
@@ -231,7 +231,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "Qo" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -288,7 +288,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "Qo" (*v), [expectnot] "r" (expectnot), [load] "Qo" (*load),
@@ -338,7 +338,7 @@ int rseq_addv(intptr_t *v, intptr_t coun : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "Qo" (*v), [count] "r" (count)RSEQ_INJECT_INPUT
@@ -389,7 +389,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -448,7 +448,7 @@ int rseq_cmpeqv_trystorev_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -509,7 +509,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "Qo" (*v), [expect] "r" (expect), [v2] "Qo" (*v2),
@@ -570,7 +570,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
@@ -630,7 +630,7 @@ int rseq_cmpeqv_trymemcpy_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [expect] "r" (expect), [v] "Qo" (*v), [newv] "r" (newv),
tools/testing/selftests/rseq/rseq-mips.h +8 -8
@@ -191,7 +191,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -259,7 +259,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -320,7 +320,7 @@ int rseq_addv(intptr_t *v, intptr_t coun : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [count] "Ir" (count)RSEQ_INJECT_INPUT
@@ -383,7 +383,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -457,7 +457,7 @@ int rseq_cmpeqv_trystorev_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -533,7 +533,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -650,7 +650,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -772,7 +772,7 @@ int rseq_cmpeqv_trymemcpy_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-ppc.h +8 -8
@@ -236,7 +236,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -302,7 +302,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -360,7 +360,7 @@ int rseq_addv(intptr_t *v, intptr_t coun : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [count] "r" (count)
@@ -420,7 +420,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -490,7 +490,7 @@ int rseq_cmpeqv_trystorev_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -561,7 +561,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -636,7 +636,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
@@ -712,7 +712,7 @@ int rseq_cmpeqv_trymemcpy_storev_release : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq-s390.h +6 -6
@@ -166,7 +166,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -234,7 +234,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -289,7 +289,7 @@ int rseq_addv(intptr_t *v, intptr_t coun : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [count] "r" (count)
@@ -348,7 +348,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -427,7 +427,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -535,7 +535,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), [current_cpu_id] "m" (rseq_get_abi()->cpu_id), - [rseq_cs] "m" (rseq_get_abi()->rseq_cs), + [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
Greg Kroah-Hartman
maintainerPATCH 43/58 selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit de6b52a21420a18dc8a36438d581efd1313d5fe3 upstream.
Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:/tmp/ccieEWxU.s:118: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:118: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:121: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:121: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:626: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:626: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:629: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:629: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:735: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:735: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:738: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:738: Error: junk at end of line: ,8' /tmp/ccieEWxU.s:741: Error: syntax error; found ,', expected (' /tmp/ccieEWxU.s:741: Error: junk at end of line: `,8' Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of the use of the "m" operand in powerpc kernel code, add the missing %Un%Xn (where n is operand number) to the lwz, stw, ld, and std instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on the architecture is misleading. The term "WORD" really means a 32-bit type in both 32-bit and 64-bit powerpc assembler. The intent here is to wrap load/store to intptr_t into common macros for both 32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT" for always 32-bit type, and "LONG" for architecture bitness-sized type.
--- tools/testing/selftests/rseq/rseq-ppc.h | 55 ++++++++++++++++---------------- 1 file changed, 28 insertions(+), 27 deletions(-)
tools/testing/selftests/rseq/rseq-ppc.h +28 -27
@@ -47,10 +47,13 @@ do { \#ifdef __PPC64__ -#define STORE_WORD "std " -#define LOAD_WORD "ld " -#define LOADX_WORD "ldx " -#define CMP_WORD "cmpd " +#define RSEQ_STORE_LONG (arg) "std%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* To memory ("m" constraint) */ +#define RSEQ_STORE_INT (arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* To memory ("m" constraint) */ +#define RSEQ_LOAD_LONG (arg) "ld%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* From memory ("m" constraint) */ +#define RSEQ_LOAD_INT (arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* From memory ("m" constraint) */ +#define RSEQ_LOADX_LONG "ldx "/* From base register ("b" constraint) */ +#define RSEQ_CMP_LONG "cmpd " +#define RSEQ_CMP_LONG_INT "cmpdi "#define __RSEQ_ASM_DEFINE_TABLE (label, version, flags, \ start_ip, post_commit_offset, abort_ip) \
@@ -89,10 +92,13 @@ do { \#else /* #ifdef __PPC64__ */ -#define STORE_WORD "stw " -#define LOAD_WORD "lwz " -#define LOADX_WORD "lwzx " -#define CMP_WORD "cmpw " +#define RSEQ_STORE_LONG (arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* To memory ("m" constraint) */ +#define RSEQ_STORE_INT (arg) RSEQ_STORE_LONG(arg)/* To memory ("m" constraint) */ +#define RSEQ_LOAD_LONG (arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] "/* From memory ("m" constraint) */ +#define RSEQ_LOAD_INT (arg) RSEQ_LOAD_LONG(arg)/* From memory ("m" constraint) */ +#define RSEQ_LOADX_LONG "lwzx "/* From base register ("b" constraint) */ +#define RSEQ_CMP_LONG "cmpw " +#define RSEQ_CMP_LONG_INT "cmpwi "#define __RSEQ_ASM_DEFINE_TABLE (label, version, flags, \ start_ip, post_commit_offset, abort_ip) \
@@ -125,7 +131,7 @@ do { \ RSEQ_INJECT_ASM(1) \ "lis %%r17, (" __rseq_str(cs_label) ")@ha\n\t" \ "addi %%r17, %%r17, (" __rseq_str(cs_label) ")@l\n\t" \ - "stw %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ + RSEQ_STORE_INT(rseq_cs) "%%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ __rseq_str(label) ":\n\t"#endif /* #ifdef __PPC64__ */
@@ -136,7 +142,7 @@ do { \#define RSEQ_ASM_CMP_CPU_ID (cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "lwz %%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \ + RSEQ_LOAD_INT(current_cpu_id) "%%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \ "cmpw cr7, %[" __rseq_str(cpu_id) "], %%r17\n\t" \ "bne- cr7, " __rseq_str(label) "\n\t"
@@ -153,25 +159,25 @@ do { \* RSEQ_ASM_OP_* (else): doesn't have hard-code registers(unless cr7) */ #define RSEQ_ASM_OP_CMPEQ (var, expect, label) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ - CMP_WORD "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \ + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \ "bne- cr7, " __rseq_str(label) "\n\t"#define RSEQ_ASM_OP_CMPNE (var, expectnot, label) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ - CMP_WORD "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \ + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \ "beq- cr7, " __rseq_str(label) "\n\t"#define RSEQ_ASM_OP_STORE (value, var) \ - STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" + RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t"/* Load @var to r17 */ #define RSEQ_ASM_OP_R_LOAD (var) \ - LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" + RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"/* Store r17 to @var */ #define RSEQ_ASM_OP_R_STORE (var) \ - STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" + RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"/* Add @count to r17 */ #define RSEQ_ASM_OP_R_ADD (count) \
@@ -179,11 +185,11 @@ do { \/* Load (r17 + voffp) to r17 */ #define RSEQ_ASM_OP_R_LOADX (voffp) \ - LOADX_WORD "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t" + RSEQ_LOADX_LONG "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t"/* TODO: implement a faster memcpy. */ #define RSEQ_ASM_OP_R_MEMCPY () \ - "cmpdi %%r19, 0\n\t" \ + RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \ "beq 333f\n\t" \ "addi %%r20, %%r20, -1\n\t" \ "addi %%r21, %%r21, -1\n\t" \
@@ -191,16 +197,16 @@ do { \"lbzu %%r18, 1(%%r20)\n\t" \"stbu %%r18, 1(%%r21)\n\t" \"addi %%r19, %%r19, -1\n\t" \ -"cmpdi %%r19, 0\n\t" \ +RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \"bne 222b\n\t" \ "333:\n\t" \#define RSEQ_ASM_OP_R_FINAL_STORE (var, post_commit_label) \ - STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \ + RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \ __rseq_str(post_commit_label) ":\n\t"#define RSEQ_ASM_OP_FINAL_STORE (value, var, post_commit_label) \ - STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \ + RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \ __rseq_str(post_commit_label) ":\n\t" static inline __attribute__((always_inline))
@@ -743,9 +749,4 @@ error2: #endif } -#undef STORE_WORD -#undef LOAD_WORD -#undef LOADX_WORD -#undef CMP_WORD -#endif /* !RSEQ_SKIP_FASTPATH */
Greg Kroah-Hartman
maintainerPATCH 44/58 selftests/rseq: Fix ppc32 offsets by using long rather than off_t
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 26dc8a6d8e11552f3b797b5aafe01071ca32d692 upstream.
The semantic of off_t is for file offsets. We mean to use it as an offset from a pointer. We really expect it to fit in a single register, and not use a 64-bit type on 32-bit architectures.
Fix runtime issues on ppc32 where the offset is always 0 due to inconsistency between the argument type (off_t -> 64-bit) and type expected by the inline assembler (32-bit).
--- tools/testing/selftests/rseq/basic_percpu_ops_test.c | 2 +- tools/testing/selftests/rseq/param_test.c | 2 +- tools/testing/selftests/rseq/rseq-arm.h | 2 +- tools/testing/selftests/rseq/rseq-arm64.h | 2 +- tools/testing/selftests/rseq/rseq-mips.h | 2 +- tools/testing/selftests/rseq/rseq-ppc.h | 2 +- tools/testing/selftests/rseq/rseq-s390.h | 2 +- tools/testing/selftests/rseq/rseq-skip.h | 2 +- tools/testing/selftests/rseq/rseq-x86.h | 6 +++--- 9 files changed, 11 insertions(+), 11 deletions(-)
tools/testing/selftests/rseq/basic_percpu_ops_test.c +1 -1
@@ -167,7 +167,7 @@ struct percpu_list_node *this_cpu_list_pfor (;;) {struct percpu_list_node *head;intptr_t *targetptr, expectnot, *load; -off_t offset; +long offset;int ret, cpu; cpu =rseq_cpu_start ();
tools/testing/selftests/rseq/param_test.c +1 -1
@@ -547,7 +547,7 @@ struct percpu_list_node *this_cpu_list_pfor (;;) {struct percpu_list_node *head;intptr_t *targetptr, expectnot, *load; -off_t offset; +long offset;int ret; cpu =rseq_cpu_start ();
tools/testing/selftests/rseq/rseq-arm.h +1 -1
@@ -217,7 +217,7 @@ error2:static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
tools/testing/selftests/rseq/rseq-arm64.h +1 -1
@@ -259,7 +259,7 @@ error2:static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
tools/testing/selftests/rseq/rseq-mips.h +1 -1
@@ -222,7 +222,7 @@ error2:static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
tools/testing/selftests/rseq/rseq-ppc.h +1 -1
@@ -270,7 +270,7 @@ error2:static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
tools/testing/selftests/rseq/rseq-s390.h +1 -1
@@ -198,7 +198,7 @@ error2:*/ static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
tools/testing/selftests/rseq/rseq-skip.h +1 -1
@@ -13,7 +13,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpstatic inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {return -1 ; }
tools/testing/selftests/rseq/rseq-x86.h +3 -3
@@ -172,7 +172,7 @@ error2:*/ static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
@@ -286,7 +286,7 @@ error1:* *pval += inc; */ static inline __attribute__((always_inline)) -int rseq_offset_deref_addv (intptr_t *ptr,off_t off,intptr_t inc,int cpu) +int rseq_offset_deref_addv (intptr_t *ptr,long off,intptr_t inc,int cpu) {RSEQ_INJECT_C (9 )
@@ -750,7 +750,7 @@ error2:*/ static inline __attribute__((always_inline))int rseq_cmpnev_storeoffp_load (intptr_t *v,intptr_t expectnot, -off_t voffp,intptr_t *load,int cpu) +long voffp,intptr_t *load,int cpu) {RSEQ_INJECT_C (9 )
Greg Kroah-Hartman
maintainerPATCH 45/58 selftests/rseq: Fix warnings about #if checks of undefined tokens
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit d7ed99ade3e62b755584eea07b4e499e79240527 upstream.
--- tools/testing/selftests/rseq/param_test.c | 2 +- tools/testing/selftests/rseq/rseq-x86.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/rseq/param_test.c +1 -1
@@ -159,7 +159,7 @@ unsigned int yield_mod_cnt, nr_abort;" cbnz " INJECT_ASM_REG ", 222b\n" \ "333:\n" -#elif __PPC__ +#elif defined(__PPC__)#define RSEQ_INJECT_INPUT \ , [loop_cnt_1]"m"(loop_cnt[1]) \
tools/testing/selftests/rseq/rseq-x86.h +1 -1
@@ -600,7 +600,7 @@ int rseq_cmpeqv_trymemcpy_storev_release#endif /* !RSEQ_SKIP_FASTPATH */ -#elif __i386__ +#elif defined(__i386__)#define rseq_smp_mb () \ __asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
Greg Kroah-Hartman
maintainerPATCH 46/58 selftests/rseq: Remove arm/mips asm goto compiler work-around
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 94c5cf2a0e193afffef8de48ddc42de6df7cac93 upstream.
The arm and mips work-around for asm goto size guess issues are not properly documented, and lack reference to specific compiler versions, upstream compiler bug tracker entry, and reproducer.
I can only find a loosely documented patch in my original LKML rseq post refering to gcc < 7 on ARM, but it does not appear to be sufficient to track the exact issue. Also, I am not sure MIPS really has the same limitation.
Therefore, remove the work-around until we can properly document this.
--- tools/testing/selftests/rseq/rseq-arm.h | 37 ------------------------------- tools/testing/selftests/rseq/rseq-mips.h | 37 ------------------------------- 2 files changed, 74 deletions(-)
tools/testing/selftests/rseq/rseq-arm.h +0 -37
@@ -147,14 +147,11 @@ do { \ teardown \ "b %l[" __rseq_str(cmpfail_label) "]\n\t" -#define rseq_workaround_gcc_asm_size_guess () __asm__ __volatile__("") - static inline __attribute__((always_inline))int rseq_cmpeqv_storev (intptr_t *v,intptr_t expect,intptr_t newv,int cpu) { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -198,14 +195,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intp , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -221,7 +215,6 @@ int rseq_cmpnev_storeoffp_load(intptr_t { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -270,14 +263,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -292,7 +282,6 @@ int rseq_addv(intptr_t *v, intptr_t coun { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */#ifdef RSEQ_COMPARE_TWICE
@@ -328,10 +317,8 @@ int rseq_addv(intptr_t *v, intptr_t coun , error1#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1;#ifdef RSEQ_COMPARE_TWICE
@@ -347,7 +334,6 @@ int rseq_cmpeqv_trystorev_storev(intptr_ { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -398,14 +384,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_ , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -422,7 +405,6 @@ int rseq_cmpeqv_trystorev_storev_release { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -474,14 +456,11 @@ int rseq_cmpeqv_trystorev_storev_release , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -498,7 +477,6 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -554,14 +532,11 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * , error1, error2, error3#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -582,7 +557,6 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -678,21 +652,16 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("cpu_id comparison failed" ); error2: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("expected value comparison failed" );#endif }
@@ -706,7 +675,6 @@ int rseq_cmpeqv_trymemcpy_storev_release RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -803,21 +771,16 @@ int rseq_cmpeqv_trymemcpy_storev_release , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("cpu_id comparison failed" ); error2: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("expected value comparison failed" );#endif }
tools/testing/selftests/rseq/rseq-mips.h +0 -37
@@ -154,14 +154,11 @@ do { \ teardown \ "b %l[" __rseq_str(cmpfail_label) "]\n\t" -#define rseq_workaround_gcc_asm_size_guess () __asm__ __volatile__("") - static inline __attribute__((always_inline))int rseq_cmpeqv_storev (intptr_t *v,intptr_t expect,intptr_t newv,int cpu) { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -203,14 +200,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intp , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -226,7 +220,6 @@ int rseq_cmpnev_storeoffp_load(intptr_t { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -273,14 +266,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -295,7 +285,6 @@ int rseq_addv(intptr_t *v, intptr_t coun { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */#ifdef RSEQ_COMPARE_TWICE
@@ -331,10 +320,8 @@ int rseq_addv(intptr_t *v, intptr_t coun , error1#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1;#ifdef RSEQ_COMPARE_TWICE
@@ -350,7 +337,6 @@ int rseq_cmpeqv_trystorev_storev(intptr_ { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -399,14 +385,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_ , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -423,7 +406,6 @@ int rseq_cmpeqv_trystorev_storev_release { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -473,14 +455,11 @@ int rseq_cmpeqv_trystorev_storev_release , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -497,7 +476,6 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * { RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -549,14 +527,11 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * , error1, error2, error3#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1:
@@ -577,7 +552,6 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -670,21 +644,16 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("cpu_id comparison failed" ); error2: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("expected value comparison failed" );#endif }
@@ -698,7 +667,6 @@ int rseq_cmpeqv_trymemcpy_storev_release RSEQ_INJECT_C(9) -rseq_workaround_gcc_asm_size_guess (); __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -792,21 +760,16 @@ int rseq_cmpeqv_trymemcpy_storev_release , error1, error2#endif ); -rseq_workaround_gcc_asm_size_guess ();return 0 ; abort: -rseq_workaround_gcc_asm_size_guess ();RSEQ_INJECT_FAILED return -1; cmpfail: -rseq_workaround_gcc_asm_size_guess ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("cpu_id comparison failed" ); error2: -rseq_workaround_gcc_asm_size_guess ();rseq_bug ("expected value comparison failed" );#endif }
Greg Kroah-Hartman
maintainerPATCH 47/58 selftests/rseq: Fix: work-around asm goto compiler bugs
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit b53823fb2ef854222853be164f3b1e815f315144 upstream.
gcc and clang each have their own compiler bugs with respect to asm goto. Implement a work-around for compiler versions known to have those bugs.
gcc prior to 4.8.2 miscompiles asm goto.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
gcc prior to 8.1.0 miscompiles asm goto at O1.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908
clang prior to version 13.0.1 miscompiles asm goto at O2.
https://github.com/llvm/llvm-project/issues/52735
Work around these issues by adding a volatile inline asm with memory clobber in the fallthrough after the asm goto and at each label target. Emit this for all compilers in case other similar issues are found in the future.
--- tools/testing/selftests/rseq/compiler.h | 30 +++++++++++++ tools/testing/selftests/rseq/rseq-arm.h | 39 +++++++++++++++++ tools/testing/selftests/rseq/rseq-arm64.h | 45 +++++++++++++++++-- tools/testing/selftests/rseq/rseq-ppc.h | 39 +++++++++++++++++ tools/testing/selftests/rseq/rseq-s390.h | 29 ++++++++++++ tools/testing/selftests/rseq/rseq-x86.h | 68 ++++++++++++++++++++++++++++++ tools/testing/selftests/rseq/rseq.h | 1 7 files changed, 245 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/rseq/compiler.h
tools/testing/selftests/rseq/compiler.h new file +30 -0
@@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */ +/* +* rseq/compiler.h +* +* Work-around asm goto compiler bugs. +* +* (C) Copyright 2021 - Mathieu Desnoyers <[email protected]> +*/ + +#ifndef RSEQ_COMPILER_H +#define RSEQ_COMPILER_H + +/* +* gcc prior to 4.8.2 miscompiles asm goto. +* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 +* +* gcc prior to 8.1.0 miscompiles asm goto at O1. +* https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908 +* +* clang prior to version 13.0.1 miscompiles asm goto at O2. +* https://github.com/llvm/llvm-project/issues/52735 +* +* Work around these issues by adding a volatile inline asm with +* memory clobber in the fallthrough after the asm goto and at each +* label target. Emit this for all compilers in case other similar +* issues are found in the future. +*/ +#define rseq_after_asm_goto () asm volatile ("" : : : "memory") + +#endif /* RSEQ_COMPILER_H_ */
tools/testing/selftests/rseq/rseq-arm.h +39 -0
@@ -195,16 +195,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -263,16 +268,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -317,12 +327,15 @@ int rseq_addv(intptr_t *v, intptr_t coun , error1#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" );#endif }
@@ -384,16 +397,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -456,16 +474,21 @@ int rseq_cmpeqv_trystorev_storev_release , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -532,18 +555,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * , error1, error2, error3#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("1st expected value comparison failed" ); error3: +rseq_after_asm_goto ();rseq_bug ("2nd expected value comparison failed" );#endif }
@@ -652,16 +681,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -771,16 +805,21 @@ int rseq_cmpeqv_trymemcpy_storev_release , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
tools/testing/selftests/rseq/rseq-arm64.h +39 -6
171 lines not on this page · raw message
tools/testing/selftests/rseq/rseq-ppc.h +39 -0
@@ -254,16 +254,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -322,16 +327,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -378,12 +388,15 @@ int rseq_addv(intptr_t *v, intptr_t coun , error1#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" );#endif }
@@ -442,16 +455,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -512,16 +530,21 @@ int rseq_cmpeqv_trystorev_storev_release , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -583,18 +606,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * , error1, error2, error3#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("1st expected value comparison failed" ); error3: +rseq_after_asm_goto ();rseq_bug ("2nd expected value comparison failed" );#endif }
@@ -659,16 +688,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -735,16 +769,21 @@ int rseq_cmpeqv_trymemcpy_storev_release , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
tools/testing/selftests/rseq/rseq-s390.h +29 -0
@@ -178,16 +178,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -248,16 +253,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -301,12 +311,15 @@ int rseq_addv(intptr_t *v, intptr_t coun , error1#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" );#endif }
@@ -364,16 +377,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
@@ -443,18 +461,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * , error1, error2, error3#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("1st expected value comparison failed" ); error3: +rseq_after_asm_goto ();rseq_bug ("2nd expected value comparison failed" );#endif }
@@ -555,16 +579,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ , error1, error2#endif ); +rseq_after_asm_goto ();return 0 ; abort: +rseq_after_asm_goto ();RSEQ_INJECT_FAILED return -1; cmpfail: +rseq_after_asm_goto ();return 1 ;#ifdef RSEQ_COMPARE_TWICE error1: +rseq_after_asm_goto ();rseq_bug ("cpu_id comparison failed" ); error2: +rseq_after_asm_goto ();rseq_bug ("expected value comparison failed" );#endif }
tools/testing/selftests/rseq/rseq-x86.h +68 -0
288 lines not on this page · raw message
tools/testing/selftests/rseq/rseq.h +1 -0
@@ -17,6 +17,7 @@#include <stdio.h> #include <stdlib.h> #include "rseq-abi.h" +#include "compiler.h" /* * Empty code injection macros, override when testing.
Greg Kroah-Hartman
maintainerPATCH 48/58 selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 4e15bb766b6c6e963a4d33629034d0ec3b7637df upstream.
Rather than use rseq_get_abi() and pass its result through a register to the inline assembler, directly access the per-thread rseq area through a memory reference combining the %fs segment selector, the constant offset of the field in struct rseq, and the rseq_offset value (in a register).
--- tools/testing/selftests/rseq/rseq-x86.h | 58 ++++++++++++++++---------------- 1 file changed, 30 insertions(+), 28 deletions(-)
tools/testing/selftests/rseq/rseq-x86.h +30 -28
@@ -28,6 +28,8 @@#ifdef __x86_64__ +#define RSEQ_ASM_TP_SEGMENT %%fs +#define rseq_smp_mb () \ __asm__ __volatile__ ("lock; addl $0,-128(%%rsp)" ::: "memory", "cc")#define rseq_smp_rmb () rseq_barrier()
@@ -123,14 +125,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intp RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t"#endif
@@ -141,7 +143,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -189,15 +191,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])"movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[error2]\n\t"
@@ -212,7 +214,7 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -255,11 +257,11 @@ int rseq_addv(intptr_t *v, intptr_t coun RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) #endif/* final store */ "addq %[count], %[v]\n\t"
@@ -268,7 +270,7 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* final store input */ [v] "m" (*v), [count] "er" (count)
@@ -309,11 +311,11 @@ int rseq_offset_deref_addv(intptr_t *ptr RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) #endif/* get p+v */ "movq %[ptr], %%rbx\n\t"
@@ -327,7 +329,7 @@ int rseq_offset_deref_addv(intptr_t *ptrRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* final store input */ [ptr] "m" (*ptr), [off] "er" (off),
@@ -364,14 +366,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t"#endif
@@ -385,7 +387,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -444,8 +446,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t"
@@ -454,7 +456,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *"jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])"cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpq %[v2], %[expect2]\n\t"
@@ -467,7 +469,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -524,14 +526,14 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ "movq %[dst], %[rseq_scratch1]\n\t" "movq %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f) "cmpq %[v], %[expect]\n\t" "jnz 7f\n\t"#endif
@@ -579,7 +581,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" ((long)rseq_offset), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
Greg Kroah-Hartman
maintainerPATCH 49/58 selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread area
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 127b6429d235ab7c358223bbfd8a8b8d8cc799b6 upstream.
Rather than use rseq_get_abi() and pass its result through a register to the inline assembler, directly access the per-thread rseq area through a memory reference combining the %gs segment selector, the constant offset of the field in struct rseq, and the rseq_offset value (in a register).
--- tools/testing/selftests/rseq/rseq-x86.h | 66 ++++++++++++++++---------------- 1 file changed, 34 insertions(+), 32 deletions(-)
tools/testing/selftests/rseq/rseq-x86.h +34 -32
@@ -633,6 +633,8 @@ int rseq_cmpeqv_trymemcpy_storev_release#elif defined(__i386__) +#define RSEQ_ASM_TP_SEGMENT %%gs +#define rseq_smp_mb () \ __asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")#define rseq_smp_rmb () \
@@ -732,14 +734,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intp RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t"#endif
@@ -750,7 +752,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -798,15 +800,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])"movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[error2]\n\t"
@@ -821,7 +823,7 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -864,11 +866,11 @@ int rseq_addv(intptr_t *v, intptr_t coun RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) #endif/* final store */ "addl %[count], %[v]\n\t"
@@ -877,7 +879,7 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [count] "ir" (count)
@@ -916,14 +918,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t"#endif
@@ -938,7 +940,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* try store input */ [v2] "m" (*v2), [newv2] "m" (newv2),
@@ -987,15 +989,15 @@ int rseq_cmpeqv_trystorev_storev_release RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])"movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[error2]\n\t"
@@ -1011,7 +1013,7 @@ int rseq_cmpeqv_trystorev_storev_releaseRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -1062,8 +1064,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t * RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3)"cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t"
@@ -1072,7 +1074,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *"jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])"cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpl %[expect2], %[v2]\n\t"
@@ -1086,7 +1088,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -1144,15 +1146,15 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_ "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f)"movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t"
@@ -1202,7 +1204,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [expect] "m" (expect),
@@ -1261,15 +1263,15 @@ int rseq_cmpeqv_trymemcpy_storev_release "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4)#ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f)"movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t"
@@ -1320,7 +1322,7 @@ int rseq_cmpeqv_trymemcpy_storev_release#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_abi] "r" (rseq_get_abi()), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [expect] "m" (expect),
Greg Kroah-Hartman
maintainerPATCH 50/58 selftests/rseq: Change type of rseq_offset to ptrdiff_t
In reply to Greg Kroah-HartmanFrom: Mathieu Desnoyers <[email protected]>
commit 889c5d60fbcf332c8b6ab7054d45f2768914a375 upstream.
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
--- tools/testing/selftests/rseq/rseq-x86.h | 14 +++++++------- tools/testing/selftests/rseq/rseq.c | 5 +++-- tools/testing/selftests/rseq/rseq.h | 3 ++- 3 files changed, 12 insertions(+), 10 deletions(-)
tools/testing/selftests/rseq/rseq-x86.h +7 -7
@@ -143,7 +143,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intpRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv)
@@ -214,7 +214,7 @@ int rseq_cmpnev_storeoffp_load(intptr_tRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot),
@@ -270,7 +270,7 @@ int rseq_addv(intptr_t *v, intptr_t counRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [count] "er" (count)
@@ -329,7 +329,7 @@ int rseq_offset_deref_addv(intptr_t *ptrRSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* final store input */ [ptr] "m" (*ptr), [off] "er" (off),
@@ -387,7 +387,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2),
@@ -469,7 +469,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *RSEQ_ASM_DEFINE_ABORT (4 ,"" , abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2),
@@ -581,7 +581,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_#endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [rseq_offset] "r" ((long)rseq_offset), + [rseq_offset] "r" (rseq_offset), /* final store input */ [v] "m" (*v), [expect] "r" (expect),
tools/testing/selftests/rseq/rseq.c +3 -2
@@ -27,16 +27,17 @@#include <signal.h> #include <limits.h> #include <dlfcn.h> +#include <stddef.h> #include "../kselftest.h" #include "rseq.h" -static const int *libc_rseq_offset_p; +static const ptrdiff_t *libc_rseq_offset_p;static const unsigned int *libc_rseq_size_p;static const unsigned int *libc_rseq_flags_p;/* Offset from the thread pointer to the rseq area. */ -int rseq_offset; +ptrdiff_t rseq_offset;/* Size of the registered rseq area. 0 if the registration was unsuccessful. */
tools/testing/selftests/rseq/rseq.h +2 -1
@@ -16,6 +16,7 @@#include <errno.h> #include <stdio.h> #include <stdlib.h> +#include <stddef.h> #include "rseq-abi.h" #include "compiler.h"
@@ -47,7 +48,7 @@#include "rseq-thread-pointer.h" /* Offset from the thread pointer to the rseq area. */ -extern int rseq_offset; +extern ptrdiff_t rseq_offset;/* Size of the registered rseq area. 0 if the registration was unsuccessful. */ extern unsigned int rseq_size;
Greg Kroah-Hartman
maintainerPATCH 51/58 xen/blkfront: fix leaking data in shared pages
In reply to Greg Kroah-HartmanFrom: Roger Pau Monne <[email protected]>
commit 2f446ffe9d737e9a844b97887919c4fda18246e7 upstream.
When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages.
This is CVE-2022-26365, part of XSA-403.
--- drivers/block/xen-blkfront.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/block/xen-blkfront.c +4 -3
@@ -301,7 +301,7 @@ static int fill_grant_buffer(struct blkf goto out_of_memory;if (info->feature_persistent) { - granted_page =alloc_page (GFP_NOIO ); + granted_page =alloc_page (GFP_NOIO | __GFP_ZERO);if (!granted_page) {kfree (gnt_list_entry); goto out_of_memory;
@@ -1744,7 +1744,7 @@ static int setup_blkring(struct xenbus_dfor (i =0 ; i < info->nr_ring_pages; i++) rinfo->ring_ref[i] =GRANT_INVALID_REF ; - sring =alloc_pages_exact (ring_size,GFP_NOIO ); + sring =alloc_pages_exact (ring_size,GFP_NOIO | __GFP_ZERO);if (!sring) {xenbus_dev_fatal (dev, -ENOMEM ,"allocating shared ring" );return -ENOMEM ;
@@ -2283,7 +2283,8 @@ static int blkfront_setup_indirect(strucBUG_ON (!list_empty (&rinfo->indirect_pages));for (i =0 ; i < num; i++) { -struct page *indirect_page =alloc_page (GFP_KERNEL ); +struct page *indirect_page =alloc_page (GFP_KERNEL | + __GFP_ZERO);if (!indirect_page) goto out_of_memory;list_add (&indirect_page->lru, &rinfo->indirect_pages);
Greg Kroah-Hartman
maintainerPATCH 52/58 xen/netfront: fix leaking data in shared pages
In reply to Greg Kroah-HartmanFrom: Roger Pau Monne <[email protected]>
commit 307c8de2b02344805ebead3440d8feed28f2f010 upstream.
When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages.
This is CVE-2022-33740, part of XSA-403.
--- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/xen-netfront.c +1 -1
@@ -261,7 +261,7 @@ static struct sk_buff *xennet_alloc_one_if (unlikely (!skb))return NULL ; - page =alloc_page (GFP_ATOMIC | __GFP_NOWARN); + page =alloc_page (GFP_ATOMIC | __GFP_NOWARN | __GFP_ZERO);if (!page) {kfree_skb (skb);return NULL ;
Greg Kroah-Hartman
maintainerPATCH 53/58 xen/netfront: force data bouncing when backend is untrusted
In reply to Greg Kroah-HartmanFrom: Roger Pau Monne <[email protected]>
commit 4491001c2e0fa69efbb748c96ec96b100a5cdb7e upstream.
Bounce all data on the skbs to be transmitted into zeroed pages if the backend is untrusted. This avoids leaking data present in the pages shared with the backend but not part of the skb fragments. This requires introducing a new helper in order to allocate skbs with a size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the granted pages.
Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device.
This is CVE-2022-33741, part of XSA-403.
--- drivers/net/xen-netfront.c | 50 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 48 insertions(+), 2 deletions(-)
drivers/net/xen-netfront.c +48 -2
@@ -63,6 +63,10 @@ module_param_named(max_queues, xennet_maMODULE_PARM_DESC (max_queues,"Maximum number of queues per virtual interface" ); +static bool __read_mostly xennet_trusted = true; +module_param_named (trusted, xennet_trusted, bool,0644 ); +MODULE_PARM_DESC (trusted,"Is the backend trusted" ); +#define XENNET_TIMEOUT (5 * HZ)static const struct ethtool_ops xennet_ethtool_ops;
@@ -163,6 +167,9 @@ struct netfront_info {/* Is device behaving sane? */ bool broken; +/* Should skbs be bounced into a zeroed buffer? */ +bool bounce; +atomic_t rx_gso_checksum_fixup; };
@@ -590,6 +597,34 @@ static void xennet_mark_tx_pending(struc queue->tx_link[i] =TX_PENDING ; } +struct sk_buff *bounce_skb (const struct sk_buff *skb) +{ +unsigned int headerlen =skb_headroom (skb); +/* Align size to allocate full pages and avoid contiguous data leaks */ +unsigned int size =ALIGN (skb_end_offset (skb) + skb->data_len, +XEN_PAGE_SIZE ); +struct sk_buff *n =alloc_skb (size,GFP_ATOMIC | __GFP_ZERO); + +if (!n) +return NULL ; + +if (!IS_ALIGNED ((uintptr_t )n->head,XEN_PAGE_SIZE )) { +WARN_ONCE (1 ,"misaligned skb allocated\n" ); +kfree_skb (n); +return NULL ; + } + +/* Set the data pointer */ +skb_reserve (n, headerlen); +/* Set the tail pointer and length */ +skb_put (n, skb->len); + +BUG_ON (skb_copy_bits (skb, -headerlen, n->head, headerlen + skb->len)); + +skb_copy_header (n, skb); +return n; +} +#define MAX_XEN_SKB_FRAGS (65536 / XEN_PAGE_SIZE + 1)static netdev_tx_t xennet_start_xmit (struct sk_buff *skb,struct net_device *dev)
@@ -642,9 +677,13 @@ static netdev_tx_t xennet_start_xmit(str/* The first req should be at least ETH_HLEN size or the packet will be * dropped by netback. +* +* If the backend is not trusted bounce all data to zeroed pages to +* avoid exposing contiguous data on the granted page not belonging to +* the skb. */ -if (unlikely (PAGE_SIZE - offset <ETH_HLEN )) { - nskb =skb_copy (skb,GFP_ATOMIC ); +if (np->bounce ||unlikely (PAGE_SIZE - offset <ETH_HLEN )) { + nskb =bounce_skb (skb);if (!nskb) goto drop;dev_consume_skb_any (skb);
@@ -1950,6 +1989,10 @@ static int talk_to_netback(struct xenbus info->netdev->irq =0 ; +/* Check if backend is trusted. */ + info->bounce = !xennet_trusted || + !xenbus_read_unsigned (dev->nodename,"trusted" ,1 ); +/* Check if backend supports multiple queues */ max_queues =xenbus_read_unsigned (info->xbdev->otherend,"multi-queue-max-queues" ,1 );
@@ -2103,6 +2146,9 @@ static int xennet_connect(struct net_dev err =talk_to_netback (np->xbdev, np);if (err)return err; +if (np->bounce) +dev_info (&np->xbdev->dev, +"bouncing transmitted data to zeroed pages\n" );/* talk_to_netback() sets the correct number of queues */ num_queues = dev->real_num_tx_queues;
Greg Kroah-Hartman
maintainerPATCH 54/58 xen/blkfront: force data bouncing when backend is untrusted
In reply to Greg Kroah-HartmanFrom: Roger Pau Monne <[email protected]>
commit 2400617da7eebf9167d71a46122828bc479d64c9 upstream.
Split the current bounce buffering logic used with persistent grants into it's own option, and allow enabling it independently of persistent grants. This allows to reuse the same code paths to perform the bounce buffering required to avoid leaking contiguous data in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
--- drivers/block/xen-blkfront.c | 49 +++++++++++++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 15 deletions(-)
drivers/block/xen-blkfront.c +34 -15
@@ -151,6 +151,10 @@ static unsigned int xen_blkif_max_ring_omodule_param_named (max_ring_page_order, xen_blkif_max_ring_order, int,0444 );MODULE_PARM_DESC (max_ring_page_order,"Maximum order of pages to be used for the shared ring" ); +static bool __read_mostly xen_blkif_trusted = true; +module_param_named (trusted, xen_blkif_trusted, bool,0644 ); +MODULE_PARM_DESC (trusted,"Is the backend trusted" ); +#define BLK_RING_SIZE (info) \ __CONST_RING_SIZE(blkif, XEN_PAGE_SIZE * (info)->nr_ring_pages)
@@ -211,6 +215,7 @@ struct blkfront_info unsigned int feature_discard:1; unsigned int feature_secdiscard:1; unsigned int feature_persistent:1; + unsigned int bounce:1;unsigned int discard_granularity;unsigned int discard_alignment;/* Number of 4KB segments handled */
@@ -300,7 +305,7 @@ static int fill_grant_buffer(struct blkfif (!gnt_list_entry) goto out_of_memory; -if (info->feature_persistent) { +if (info->bounce) { granted_page =alloc_page (GFP_NOIO | __GFP_ZERO);if (!granted_page) {kfree (gnt_list_entry);
@@ -320,7 +325,7 @@ out_of_memory:list_for_each_entry_safe (gnt_list_entry, n, &rinfo->grants, node) {list_del (&gnt_list_entry->node); -if (info->feature_persistent) +if (info->bounce)__free_page (gnt_list_entry->page);kfree (gnt_list_entry); i--;
@@ -366,7 +371,7 @@ static struct grant *get_grant(grant_ref/* Assign a gref to this page */ gnt_list_entry->gref =gnttab_claim_grant_reference (gref_head);BUG_ON (gnt_list_entry->gref == -ENOSPC ); -if (info->feature_persistent) +if (info->bounce)grant_foreign_access (gnt_list_entry, info);else {/* Grant access to the GFN passed by the caller */
@@ -390,7 +395,7 @@ static struct grant *get_indirect_grant(/* Assign a gref to this page */ gnt_list_entry->gref =gnttab_claim_grant_reference (gref_head);BUG_ON (gnt_list_entry->gref == -ENOSPC ); -if (!info->feature_persistent) { +if (!info->bounce) {struct page *indirect_page;/* Fetch a pre-allocated page to use for indirect grefs */
@@ -705,7 +710,7 @@ static int blkif_queue_rw_req(struct req .grant_idx = 0, .segments = NULL, .rinfo = rinfo, - .need_copy = rq_data_dir(req) && info->feature_persistent, + .need_copy = rq_data_dir(req) && info->bounce, };/*
@@ -1026,11 +1031,12 @@ static void xlvbd_flush(struct blkfront_ {blk_queue_write_cache (info->rq, info->feature_flush ? true : false, info->feature_fua ? true : false); -pr_info ("blkfront: %s: %s %s %s %s %s\n" , +pr_info ("blkfront: %s: %s %s %s %s %s %s %s\n" , info->gd->disk_name,flush_info (info),"persistent grants:" , info->feature_persistent ?"enabled;" :"disabled;" ,"indirect descriptors:" , - info->max_indirect_segments ?"enabled;" :"disabled;" ); + info->max_indirect_segments ?"enabled;" :"disabled;" , +"bounce buffer:" , info->bounce ?"enabled" :"disabled;" ); }static int xen_translate_vdev (int vdevice,int *minor,unsigned int *offset)
@@ -1265,7 +1271,7 @@ static void blkif_free_ring(struct blkfrif (!list_empty (&rinfo->indirect_pages)) {struct page *indirect_page, *n; -BUG_ON (info->feature_persistent); +BUG_ON (info->bounce);list_for_each_entry_safe (indirect_page, n, &rinfo->indirect_pages, lru) {list_del (&indirect_page->lru);__free_page (indirect_page);
@@ -1282,7 +1288,7 @@ static void blkif_free_ring(struct blkfr 0, 0UL); rinfo->persistent_gnts_c--; } -if (info->feature_persistent) +if (info->bounce)__free_page (persistent_gnt->page);kfree (persistent_gnt); }
@@ -1303,7 +1309,7 @@ static void blkif_free_ring(struct blkfrfor (j =0 ; j < segs; j++) { persistent_gnt = rinfo->shadow[i].grants_used[j];gnttab_end_foreign_access (persistent_gnt->gref,0 ,0UL ); -if (info->feature_persistent) +if (info->bounce)__free_page (persistent_gnt->page);kfree (persistent_gnt); }
@@ -1493,7 +1499,7 @@ static int blkif_completion(unsigned lon data.s = s; num_sg = s->num_sg; -if (bret->operation ==BLKIF_OP_READ && info->feature_persistent) { +if (bret->operation ==BLKIF_OP_READ && info->bounce) {for_each_sg (s->sg, sg, num_sg, i) {BUG_ON (sg->offset + sg->length >PAGE_SIZE );
@@ -1552,7 +1558,7 @@ static int blkif_completion(unsigned lon* Add the used indirect page back to the list of * available pages for indirect grefs. */ -if (!info->feature_persistent) { +if (!info->bounce) { indirect_page = s->indirect_grants[i]->page;list_add (&indirect_page->lru, &rinfo->indirect_pages); }
@@ -1847,6 +1853,10 @@ static int talk_to_blkback(struct xenbusif (!info)return -ENODEV ; +/* Check if backend is trusted. */ + info->bounce = !xen_blkif_trusted || + !xenbus_read_unsigned (dev->nodename,"trusted" ,1 ); + max_page_order =xenbus_read_unsigned (info->xbdev->otherend,"max-ring-page-order" ,0 ); ring_page_order =min (xen_blkif_max_ring_order, max_page_order);
@@ -2273,10 +2283,10 @@ static int blkfront_setup_indirect(strucif (err) goto out_of_memory; -if (!info->feature_persistent && info->max_indirect_segments) { +if (!info->bounce && info->max_indirect_segments) {/* -* We are using indirect descriptors but not persistent -* grants, we need to allocate a set of pages that can be +* We are using indirect descriptors but don't have a bounce +* buffer, we need to allocate a set of pages that can be * used for mapping indirect grefs */ int num =INDIRECT_GREFS (grants) *BLK_RING_SIZE (info);
@@ -2376,6 +2386,8 @@ static void blkfront_gather_backend_feat info->feature_persistent = !!xenbus_read_unsigned (info->xbdev->otherend,"feature-persistent" ,0 ); +if (info->feature_persistent) + info->bounce = true; indirect_segments =xenbus_read_unsigned (info->xbdev->otherend,"feature-max-indirect-segments" ,0 );
@@ -2751,6 +2763,13 @@ static void blkfront_delay_work(struct wstruct blkfront_info *info;bool need_schedule_work = false; +/* +* Note that when using bounce buffers but not persistent grants +* there's no need to run blkfront_delay_work because grants are +* revoked in blkif_completion or else an error is reported and the +* connection is closed. +*/ +mutex_lock (&blkfront_mutex);list_for_each_entry (info, &info_list, info_list) {
Greg Kroah-Hartman
maintainerPATCH 55/58 xen/arm: Fix race in RB-tree based P2M accounting
In reply to Greg Kroah-HartmanFrom: Oleksandr Tyshchenko <[email protected]>
commit b75cd218274e01d026dc5240e86fdeb44bbed0c8 upstream.
During the PV driver life cycle the mappings are added to the RB-tree by set_foreign_p2m_mapping(), which is called from gnttab_map_refs() and are removed by clear_foreign_p2m_mapping() which is called from gnttab_unmap_refs(). As both functions end up calling __set_phys_to_machine_multi() which updates the RB-tree, this function can be called concurrently.
There is already a "p2m_lock" to protect against concurrent accesses, but the problem is that the first read of "phys_to_mach.rb_node" in __set_phys_to_machine_multi() is not covered by it, so this might lead to the incorrect mappings update (removing in our case) in RB-tree.
In my environment the related issue happens rarely and only when PV net backend is running, the xen_add_phys_to_mach_entry() claims that it cannot add new pfn <-> mfn mapping to the tree since it is already exists which results in a failure when mapping foreign pages.
But there might be other bad consequences related to the non-protected root reads such use-after-free, etc.
While at it, also fix the similar usage in __pfn_to_mfn(), so initialize "struct rb_node *n" with the "p2m_lock" held in both functions to avoid possible bad consequences.
This is CVE-2022-33744 / XSA-406.
--- arch/arm/xen/p2m.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/arm/xen/p2m.c +4 -2
@@ -62,11 +62,12 @@ out:unsigned long __pfn_to_mfn (unsigned long pfn) { -struct rb_node *n = phys_to_mach.rb_node; +struct rb_node *n;struct xen_p2m_entry *entry;unsigned long irqflags;read_lock_irqsave (&p2m_lock, irqflags); + n = phys_to_mach.rb_node;while (n) { entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys); if (entry->pfn <= pfn &&
@@ -153,10 +154,11 @@ bool __set_phys_to_machine_multi(unsigneint rc;unsigned long irqflags;struct xen_p2m_entry *p2m_entry; -struct rb_node *n = phys_to_mach.rb_node; +struct rb_node *n;if (mfn ==INVALID_P2M_ENTRY ) {write_lock_irqsave (&p2m_lock, irqflags); + n = phys_to_mach.rb_node;while (n) { p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys); if (p2m_entry->pfn <= pfn &&
Greg Kroah-Hartman
maintainerPATCH 56/58 net: usb: qmi_wwan: add Telit 0x1060 composition
In reply to Greg Kroah-HartmanFrom: Carlo Lobrano <[email protected]>
commit 8d17a33b076d24aa4861f336a125c888fb918605 upstream.
This patch adds support for Telit LN920 0x1060 composition
0x1060: tty, adb, rmnet, tty, tty, tty, tty
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1315,6 +1315,7 @@ static const struct usb_device_id produc {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
Greg Kroah-Hartman
maintainerPATCH 57/58 net: usb: qmi_wwan: add Telit 0x1070 composition
In reply to Greg Kroah-HartmanFrom: Daniele Palmas <[email protected]>
commit 94f2a444f28a649926c410eb9a38afb13a83ebe0 upstream.
Add the following Telit FN990 composition:
0x1070: tty, adb, rmnet, tty, tty, tty, tty
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1316,6 +1316,7 @@ static const struct usb_device_id produc {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
Greg Kroah-Hartman
maintainerPATCH 58/58 clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup()
In reply to Greg Kroah-HartmanFrom: Greg Kroah-Hartman <[email protected]>
ixp4xx_timer_setup is exported, and so can not be an __init function. But it does not need to be exported as it is only called from one in-kernel function, so just remove the EXPORT_SYMBOL_GPL() marking to resolve the build warning.
This is fixed "properly" in commit 41929c9f628b ("clocksource/drivers/ixp4xx: Drop boardfile probe path") but that can not be backported to older kernels as the reworking of the IXP4xx codebase is not suitable for stable releases.
--- drivers/clocksource/timer-ixp4xx.c | 1 - 1 file changed, 1 deletion(-)
drivers/clocksource/timer-ixp4xx.c +0 -1
@@ -258,7 +258,6 @@ void __init ixp4xx_timer_setup(resource_ }ixp4xx_timer_register (base, timer_irq, timer_freq); } -EXPORT_SYMBOL_GPL (ixp4xx_timer_setup);#ifdef CONFIG_OF static __init int ixp4xx_of_timer_init (struct device_node *np)
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.4:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
59 tests: 59 pass, 0 failLinux version: 5.4.204-rc1-g0f4cd7014f41
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04Jon
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Signature · 1 line
Florian
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
Tested on arm64 and x86 for 5.4.204-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.204-rc1
Commit: 0f4cd7014f4101204454b404e03101579ef33481
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9015
passed: 9015
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9015
passed: 9015
failed: 0
timeout: 0
--------------------------------------------------------------------
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
## Build
* kernel: 5.4.204-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 0f4cd7014f4101204454b404e03101579ef33481
* git describe: v5.4.203-59-g0f4cd7014f41
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.203-59-g0f4cd7014f41
## Test Regressions (compared to v5.4.203)
No test regressions found.
## Metric Regressions (compared to v5.4.203)
No metric regressions found.
## Test Fixes (compared to v5.4.203)
No test fixes found.
## Metric Fixes (compared to v5.4.203)
No metric fixes found.
## Test result summary
total: 122576, pass: 108899, fail: 260, skip: 12381, xfail: 1036
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 307 total, 307 passed, 0 failed
* arm64: 61 total, 59 passed, 2 failed
* i386: 28 total, 25 passed, 3 failed
* mips: 48 total, 48 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 54 total, 54 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 55 total, 54 passed, 1 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecap[
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
Hi Greg,
Quoted 7 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
Build test (gcc version 11.3.1 20220627):
mips: 65 configs -> no failure
arm: 106 configs -> no failure
arm64: 2 configs -> no failurex86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure
Boot test:x86_64: Booted on my test laptop. No regression.x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/1456
--
Regards
Sudip
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
Build results:
total: 161 pass: 161 fail: 0 Qemu test results: total: 449 pass: 449 fail: 0
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.204 release. There are 58 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.204-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.4.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah