xfs: byte-base grant head reservation tracking
cover xfs: byte-base grant head reservation tracking
[not 5.20 cycle material, just a "this actually works" RFC]
Hi folks,
One of the significant limitations of the log reservation code is that it uses physical tracking of the reservation space to account for both the space used in the journal as well as the reservations held in memory by the CIL and activei running transactions. Because this in-memory reservation tracking requires byte-level granularity, this means that the "LSN" that the grant head stores it's location in is split into 32 bits for the log cycle and 32 bits for the grant head offset into the log.
Storing a byte count as the grant head offset into the log means that we can only index 4GB of space with the grant head. This is one of the primary limiting factors preventing us from increasing the physical log size beyond 2GB. Hence to increase the physical log size, we have to increase the space available for storing the grant head.
Needing more physical space to store the grant head is an issue because we use lockless atomic accounting for the grant head to minimise the overhead of new incoming transaction reservations. These have unbound concurrency, and hence any lock in the reservation path will cause serious scalability issues. The lockless accounting fast path was the solution to these scalability problems that we had over a decade ago, and hence we know we cannot go back to a lock based solution.
Therefore we are still largely limited to the storage space we can perform atomic operations on. We already use 64 bit compare/exchange operations, and there is not widespread hardware support for 128 bit atomic compare/exchange operations so increasing the grant head LSN to a structure > 64 bits in size is not really an option.
Hence we have to look for a different solution - one that doesn't require us to increase the amount of storage space for the grant head. This is where we need to recognise that the grant head is actually tracking three things:
1. physical log space that is tracked by the AIL;
2. physical log space that the CIL will soon consume; and
3. potential log space that active transactions *may* consume.
One of the tricks that the grant heads play is that the don't need to explicitly track the space consumed by the AIL (#1), because the consumed log space is simply "grant head - log tail", and so it doesn't not matter how the space that is consumed moves between the three separate accounting groups. Reservation space is automatically returned to the "available pool" by the AIL moving the log tail forwards. Hence the grant head only needs to account for the journal space that transactions consume as they complete, and never have to be updated to account for metadata writeback emptying the journal.
This all works because xlog_space_left() is a calculation of the difference between two LSNs - the log tail and the grant head. When the grant head wraps the log tail, we've run out of log space and the journal reservations get throttled until the log tail is moved forward to "unwrap" the grant head and make space available again.
But there's no reason why we have to track log space in this way to determine that we've run out of reservation space - all we need is for xlog_space_left() to be able to accurately calculate when we've run out of space. So let's break this down.
Firstly, the AIL tracks all the items in the journal, and so at any given time it should know exactly where the on-disk head and tail of the journal are located. At the moment, we only know where the tail is (xfs_ail_min_lsn()), and we update the log tail (log->l_tail_lsn) whenever the AIL minimum LSN changes.
The AIL will see the maximum committed LSN, but it does not track this. Instead, the log tracks this as log->l_last_sync_lsn and updates this directly in iclog IO completion when a iclog has callbacks attached. That is, log->l_last_sync_lsn is updated whenever journal IO completion is going to insert the latest committed log items into the AIL. If the AIL is empty, the log tail is assigned the value stored in l_last_sync_lsn as the log tail now points to the last written checkpoint in the journal.
The simplest way I can describe how we track the log space is as follows:
l_tail_lsn l_last_sync_lsn grant head lsn
|-----------------------|+++++++++++++++++++++| | physical space | in memory space | | - - - - - - xlog_space_left() - - - - - - - |
It is simple for the AIL to track the maximum LSN that has been inserted into the AIL. If we do this, we no longer need to track log->l_last_sync_lsn in the journal itself and we can always get the physical space tracked by the journal directly from the AIL. The AIL functions can calculate the "log tail space" dynamically when either the log tail or the max LSN seen changes, thereby removing all need for the log itself to track this state. Hence we now have:
l_tail_lsn ail_max_lsn_seen grant head lsn
|-----------------------|+++++++++++++++++++++| | log->l_tail_space | in memory space | | - - - - - - xlog_space_left() - - - - - - - |
And we've solved the problem of efficiently calculating the amount of physical space the log is consuming. All this leaves is now calculating how much space we are consuming in memory.
Luckily for us, we've just added all the update hooks needed to do this. From the above diagram, two things are obvious:
1. when the tail moves, only log->l_tail_space reduces
2. when the ail_max_lsn_seen increases, log->l_tail_space increases and "in memory space" reduces by the same amount.
IOWs, we now have a mechanism that can transfer the in-memory reservation space directly to the on-disk tail space accounting. At this point, we can change the grant head from tracking physical location to tracking a simple byte count:
l_tail_lsn ail_max_lsn_seen grant head bytes
|-----------------------|+++++++++++++++++++++| | log->l_tail_space | grant space | | - - - - - - xlog_space_left() - - - - - - - |
and xlog_space_left() simply changes to:
space left = log->l_logsize - grant space - log->l_tail_space;
All of the complex grant head cracking, combining and compare/exchange code gets replaced by simple atomic add/sub operations, and the grant heads can now track a full 64 bit bytes space. The fastpath reservation accounting is also much faster because it is much simpler.
There's one little problem, though. The transaction reservation code has to set the LSN target for the AIL to push to ensure that the log tail keeps moving forward (xlog_grant_push_ail()), and the deferred intent logging code also tries to keep abreast of the amount of space available in the log via xlog_grant_push_threshold().
The AIL pushing problem is actually easy to solve - we don't need to push the AIL from the transaction reservation code as the AIL already tracks all the space used by the journal. All the transaction reservation code does is try to keep 25% of the journal physically free, and there's no reason why the AIL can't do that itself.
Hence before we start changing any of the grant head accounting, we remove all the AIL pushing hooks from the reservation code and let the AIL determine the target it needs to push to itself. We also allow the deferred intent logging code to determine if the AIL should be tail pushing similar to how it currently checks if we are running out of log space, so the intent relogging still works as it should.
WIth these changes in place, there is no external code that is dependent on the grant heads tracking physical space, and hence we can then implement the change to pure in-memory reservation space tracking in the grant heads.....
This all passes fstests for default and rmapbt enable configs. Performance tests also show good improvements where the transaction accounting is the bottleneck. This has been written and tested on top of the CIL scalability, inode unlink item and lockless buffer lookup patchesets, so if you want to test this you are probably best to start with all of them applied first.
-Dave.
PATCH 1/8 xfs: AIL doesn't need manual pushing
From: Dave Chinner <[email protected]>
We have a mechanism that checks the amount of log space remaining available every time we make a transaction reservation. If the amount of space is below a threshold (25% free) we push on the AIL to tell it to do more work. To do this, we end up calculating the LSN that the AIL needs to push to on every reservation and updating the push target for the AIL with that new target LSN.
This is silly and expensive. The AIL is perfectly capable of calculating the push target itself, and it will always be running when the AIL contains objects.
Modify the AIL to calculate it's 25% push target before it starts a push using the same reserve grant head based calculation as is currently used, and remove all the places where we ask the AIL to push to a new 25% free target.
To ensure that the AIL is always running when there are items in the AIL as we no longer get wakeups from transaction reservation, always wake the AIL when we first insert an item into the AIL. The AIL will automatically stop iterating when the AIL is empty. But while the AIL is not empty, we don't need to keep waking it.
--- fs/xfs/libxfs/xfs_defer.c | 4 +- fs/xfs/xfs_log.c | 130 +------------------------------- fs/xfs/xfs_log.h | 1 - fs/xfs/xfs_log_priv.h | 2 + fs/xfs/xfs_trans_ail.c | 155 ++++++++++++++++---------------------- fs/xfs/xfs_trans_priv.h | 33 ++++++-- 6 files changed, 100 insertions(+), 225 deletions(-)
fs/xfs/libxfs/xfs_defer.c +3 -1
@@ -12,12 +12,14 @@#include "xfs_mount.h" #include "xfs_defer.h" #include "xfs_trans.h" +#include "xfs_trans_priv.h" #include "xfs_buf_item.h" #include "xfs_inode.h" #include "xfs_inode_item.h" #include "xfs_trace.h" #include "xfs_icache.h" #include "xfs_log.h" +#include "xfs_log_priv.h" #include "xfs_rmap.h" #include "xfs_refcount.h" #include "xfs_bmap.h"
@@ -439,7 +441,7 @@ xfs_defer_relog(* the log threshold once per call. */ if (threshold_lsn ==NULLCOMMITLSN ) { - threshold_lsn =xlog_grant_push_threshold (log,0 ); + threshold_lsn =xfs_ail_push_target (log->l_ailp);if (threshold_lsn ==NULLCOMMITLSN )break ; }
fs/xfs/xfs_log.c +2 -128
187 lines not on this page · raw message
fs/xfs/xfs_log.h +0 -1
@@ -156,7 +156,6 @@ int xfs_log_quiesce(struct xfs_mount *mp);void xfs_log_clean (struct xfs_mount *mp);bool xfs_log_check_lsn (struct xfs_mount *,xfs_lsn_t ); -xfs_lsn_t xlog_grant_push_threshold (struct xlog *log,int need_bytes);bool xlog_force_shutdown (struct xlog *log,uint32_t shutdown_flags);void xlog_use_incompat_feat (struct xlog *log);
fs/xfs/xfs_log_priv.h +2 -0
@@ -573,6 +573,8 @@ xlog_assign_grant_head(atomic64_t *head, int cycle, int space)atomic64_set (head,xlog_assign_grant_head_val (cycle, space)); } +int xlog_space_left (struct xlog *log,atomic64_t *head); +/* * Committed Item List interfaces */
fs/xfs/xfs_trans_ail.c +66 -89
208 lines not on this page · raw message
fs/xfs/xfs_trans_priv.h +27 -6
@@ -55,16 +55,18 @@ struct xfs_ail {struct xlog *ail_log;struct task_struct *ail_task;struct list_head ail_head; -xfs_lsn_t ail_target; -xfs_lsn_t ail_target_prev;struct list_head ail_cursors;spinlock_t ail_lock;xfs_lsn_t ail_last_pushed_lsn;int ail_log_flush; +unsigned long ail_opstate;struct list_head ail_buf_list;wait_queue_head_t ail_empty; }; +/* Push all items out of the AIL immediately. */ +#define XFS_AIL_OPSTATE_PUSH_ALL 0u +/* * From xfs_trans_ail.c */
@@ -101,10 +103,29 @@ void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)__releases (ailp->ail_lock);void xfs_trans_ail_delete (struct xfs_log_item *lip,int shutdown_type); -void xfs_ail_push (struct xfs_ail *,xfs_lsn_t ); -void xfs_ail_push_all (struct xfs_ail *); -void xfs_ail_push_all_sync (struct xfs_ail *); -struct xfs_log_item *xfs_ail_min (struct xfs_ail *ailp); +static inline void xfs_ail_push (struct xfs_ail *ailp) +{ +wake_up_process (ailp->ail_task); +} + +static inline void xfs_ail_push_all (struct xfs_ail *ailp) +{ +if (!test_and_set_bit (XFS_AIL_OPSTATE_PUSH_ALL , &ailp->ail_opstate)) +xfs_ail_push (ailp); +} + +xfs_lsn_t __xfs_ail_push_target (struct xfs_ail *ailp); +static inline xfs_lsn_t xfs_ail_push_target (struct xfs_ail *ailp) +{ +xfs_lsn_t lsn; + +spin_lock (&ailp->ail_lock); + lsn =__xfs_ail_push_target (ailp); +spin_unlock (&ailp->ail_lock); +return lsn; +} + +void xfs_ail_push_all_sync (struct xfs_ail *ailp);xfs_lsn_t xfs_ail_min_lsn (struct xfs_ail *ailp); struct xfs_log_item * xfs_trans_ail_cursor_first(struct xfs_ail *ailp,
Signature · 1 line
2.36.1
kernel test robot
build botRe: [PATCH 1/8] xfs: AIL doesn't need manual pushing
Thank you for the patch! Perhaps something to improve:
Hi Dave,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on xfs-linux/for-next]
[also build test WARNING on linus/master v5.19-rc5 next-20220707] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: parisc-randconfig-r014-20220707 (https://download.01.org/0day-ci/archive/20220708/[email protected]/config) compiler: hppa-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/287b7d8ee5bd281f989fd89c40bd40d43244a3d7
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642
git checkout 287b7d8ee5bd281f989fd89c40bd40d43244a3d7
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=parisc SHELL=/bin/bash drivers/i2c/busses/ fs/xfs/
If you fix the issue, kindly add following tag where applicable
All warnings (new ones prefixed by >>):
fs/xfs/xfs_log.c: In function 'xlog_grant_head_wake':
>> fs/xfs/xfs_log.c:237:33: warning: variable 'woken_task' set but not used [-Wunused-but-set-variable]
237 | bool woken_task = false;
| ^~~~~~~~~~vim +/woken_task +237 fs/xfs/xfs_log.c
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 228
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 229 STATIC bool
e179840d74606ab Christoph Hellwig 2012-02-20 230 xlog_grant_head_wake(
ad223e6030be017 Mark Tinguely 2012-06-14 231 struct xlog *log,
e179840d74606ab Christoph Hellwig 2012-02-20 232 struct xlog_grant_head *head,
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 233 int *free_bytes)
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 234 {
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 235 struct xlog_ticket *tic;
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 236 int need_bytes;
7c107afb871a031 Dave Chinner 2019-09-05 @237 bool woken_task = false;
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 238
e179840d74606ab Christoph Hellwig 2012-02-20 239 list_for_each_entry(tic, &head->waiters, t_queue) {
e179840d74606ab Christoph Hellwig 2012-02-20 240 need_bytes = xlog_ticket_reservation(log, head, tic);
287b7d8ee5bd281 Dave Chinner 2022-07-08 241 if (*free_bytes < need_bytes)
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 242 return false;
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 243
e179840d74606ab Christoph Hellwig 2012-02-20 244 *free_bytes -= need_bytes;
e179840d74606ab Christoph Hellwig 2012-02-20 245 trace_xfs_log_grant_wake_up(log, tic);
14a7235fba4302a Christoph Hellwig 2012-02-20 246 wake_up_process(tic->t_task);
7c107afb871a031 Dave Chinner 2019-09-05 247 woken_task = true;
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 248 }
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 249
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 250 return true;
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 251 }
9f9c19ec1a59422 Christoph Hellwig 2011-11-28 252 Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Re: [PATCH 1/8] xfs: AIL doesn't need manual pushing
In reply to Dave ChinnerThis looks very nice, but a bunch of minor comments:
Quoted 9 lines
This is silly and expensive. The AIL is perfectly capable of calculating the push target itself, and it will always be running when the AIL contains objects.
Modify the AIL to calculate it's 25% push target before it starts a push using the same reserve grant head based calculation as is currently used, and remove all the places where we ask the AIL to push to a new 25% free target.
I suspect some of these "the AIL" to xfsaild or te AIL pusher for the sentences to make sense.
Review
Quoted 6 lines
(quoted diff) +3
-1+#include "xfs_trans_priv.h" +#include "xfs_log_priv.h" - threshold_lsn = xlog_grant_push_threshold(log, 0); + threshold_lsn = xfs_ail_push_target(log->l_ailp);
Should xfs_ail_push_target go into xfs_log.h instead of xfs_log_priv.h?
Quoted 1 line
+int
xlog_space_left(struct xlog *log, atomic64_t *head);
Nit: odd formatting with the tab before the *log.
fs/xfs/xfs_trans_ail.c xfsaild_push_item( · line 414
Quoted 12 lines
fs/xfs/xfs_trans_ail.c +12
-0+xfs_lsn_t +__xfs_ail_push_target ( +struct xfs_ail *ailp) +{ +struct xlog *log = ailp->ail_log; +xfs_lsn_t threshold_lsn =0 ; +xfs_lsn_t last_sync_lsn; +int free_blocks; +int free_bytes; +int threshold_block; +int threshold_cycle; +int free_threshold;
This culd use a:
lockdep_assert_held(&ailp->ail_lock);
to document the locking assumptions.
fs/xfs/xfs_trans_ail.c xfsaild_push_item( · line 425
Quoted 10 lines
fs/xfs/xfs_trans_ail.c +10
-0+ free_bytes =xlog_space_left (log, &log->l_reserve_head.grant); + free_blocks =BTOBBT (free_bytes); + +/* +* Set the threshold for the minimum number of free blocks in the +* log to the maximum of what the caller needs, one quarter of the +* log, and 256 blocks. +*/ + free_threshold = log->l_logBBsize >>2 ; +if (free_blocks >= free_threshold)
Nit: free_block is only used once, so there might not be much in a point in keeping it as a logcal variable.
Quoted 11 lines
fs/xfs/xfs_trans_priv.h +11
-0+static inline void xfs_ail_push (struct xfs_ail *ailp) +{ +wake_up_process (ailp->ail_task); +} + +static inline void xfs_ail_push_all (struct xfs_ail *ailp) +{ +if (!test_and_set_bit (XFS_AIL_OPSTATE_PUSH_ALL , &ailp->ail_opstate)) +xfs_ail_push (ailp); +} +
fs/xfs/xfs_trans_priv.h void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn) · line 126
Quoted 10 lines
fs/xfs/xfs_trans_priv.h +10
-0+xfs_lsn_t __xfs_ail_push_target (struct xfs_ail *ailp); +static inline xfs_lsn_t xfs_ail_push_target (struct xfs_ail *ailp) +{ +xfs_lsn_t lsn; + +spin_lock (&ailp->ail_lock); + lsn =__xfs_ail_push_target (ailp); +spin_unlock (&ailp->ail_lock); +return lsn; +}
Is there really any point in micro-optimizing these as inlines in a header?
Re: [PATCH 1/8] xfs: AIL doesn't need manual pushing
Quoted 6 lines · Christoph Hellwig
This looks very nice, but a bunch of minor comments:
Quoted 4 lines
This is silly and expensive. The AIL is perfectly capable of calculating the push target itself, and it will always be running when the AIL contains objects.
Quoted 8 lines
Quoted 5 lines
Modify the AIL to calculate it's 25% push target before it starts a push using the same reserve grant head based calculation as is currently used, and remove all the places where we ask the AIL to push to a new 25% free target.
I suspect some of these "the AIL" to xfsaild or te AIL pusher for the sentences to make sense.
Sure. This is all pretty rough "I just go this working" code right now.
Quoted 9 lines
Review
Quoted 7 lines
(quoted diff) +3
-1+#include "xfs_trans_priv.h" +#include "xfs_log_priv.h" - threshold_lsn = xlog_grant_push_threshold(log, 0); + threshold_lsn = xfs_ail_push_target(log->l_ailp);Should
xfs_ail_push_targetgo intoxfs_log.hinstead ofxfs_log_priv.h?
No.
The AIL should not be visible to anything except the log - the xfs_mount and the transaction subsystem should know nothing about it at all. And even with that isolation, the only external interfaces should be the the commit completion inserting items into the AIL and the AIL updating the amount of space it consumes.
Overall, our log/trans/log_item/ail headers and code structure is a total mess.
The "trans_ail" namesapce needs to go away entirely - the AIL has nothing to do with transactions at all - a rename of the xfs_trans_ail.c file to xfs_ail.c needs to be done, the APIs need to be renamed, and an xfs_ail.h needs to be created to expose the -minimal- API needed for external interfacing with the AIL and get all that stuff out of xfs_trans_priv.h.
Similarly, all the log reservation, ticket and grant head reservation stuff needs to be moved out of xfs_log.c and into it's own file source and header files.
xfs_log.h then should only include external interfaces to the log (i.e. external calls from xfs_mount context into internal xlog context) and xfs_log_priv.h only contains internal xlog context structures and APIs.
Then we can separate the struct xfs_log_item and all the log item futzing out of xfs_trans.h into xfs_log_item.h.
At the end of this, xfs_trans_priv.h should go away entirely, xfs_trans.h is only used in front end transaction code, xfs_log_item.h is only used back end transaction, CIL and AIL code, xfs_log.h is only needed by the few places in high level code that interface directly with the log, etc.
You can probably see me starting this re-org in this patchset by moving and renaming the AIL bulk insert function - it has nothing to do with transactions, but it is tightly intertwined with internal CIL structures (the lv chain), log items and the AIL. Hence it belongs in the CIL code, not the transaction code....
Quoted 23 lines
Quoted 1 line
+int
xlog_space_left(struct xlog *log, atomic64_t *head);Nit: odd formatting with the tab before the *log.
fs/xfs/xfs_trans_ail.c xfsaild_push_item( · line 414
Quoted 12 lines
fs/xfs/xfs_trans_ail.c +12
-0+xfs_lsn_t +__xfs_ail_push_target ( +struct xfs_ail *ailp) +{ +struct xlog *log = ailp->ail_log; +xfs_lsn_t threshold_lsn =0 ; +xfs_lsn_t last_sync_lsn; +int free_blocks; +int free_bytes; +int threshold_block; +int threshold_cycle; +int free_threshold;This culd use a:
lockdep_assert_held(&ailp->ail_lock);to document the locking assumptions.
Quoted 13 lines
fs/xfs/xfs_trans_ail.c xfsaild_push_item( · line 425
Quoted 10 lines
fs/xfs/xfs_trans_ail.c +10
-0+ free_bytes =xlog_space_left (log, &log->l_reserve_head.grant); + free_blocks =BTOBBT (free_bytes); + +/* +* Set the threshold for the minimum number of free blocks in the +* log to the maximum of what the caller needs, one quarter of the +* log, and 256 blocks. +*/ + free_threshold = log->l_logBBsize >>2 ; +if (free_blocks >= free_threshold)Nit:
free_blockis only used once, so there might not be much in a point in keeping it as a logcal variable.
Sure, but this all ends up changing
Quoted 17 lines
Quoted 17 lines
fs/xfs/xfs_trans_priv.h +16
-0+static inline void xfs_ail_push (struct xfs_ail *ailp) +{ +wake_up_process (ailp->ail_task); +} + +static inline void xfs_ail_push_all (struct xfs_ail *ailp) +{ +if (!test_and_set_bit (XFS_AIL_OPSTATE_PUSH_ALL , &ailp->ail_opstate)) +xfs_ail_push (ailp); +} + +xfs_lsn_t __xfs_ail_push_target (struct xfs_ail *ailp); +static inline xfs_lsn_t xfs_ail_push_target (struct xfs_ail *ailp) +{ +xfs_lsn_t lsn; +
Quoted 8 lines
fs/xfs/xfs_trans_priv.h void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn) · line 126
Quoted 5 lines
fs/xfs/xfs_trans_priv.h +5
-0+spin_lock (&ailp->ail_lock); + lsn =__xfs_ail_push_target (ailp); +spin_unlock (&ailp->ail_lock); +return lsn; +}Is there really any point in micro-optimizing these as inlines in a header?
It's not micro-optimisation - it's simply retaining the existing API to reduce the amount of cognitive effort needed to understand the accounting changes in the patchset. That's the important thing here
- the patch set is making a fundamental accounting change to changing a core, proven algorithm that has been in production for a couple of years short of 3 decades....
And keep in mind that, as per above, changing the API will come with restructuring the code, so it's not something I want to change right now.
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 2/8 xfs: AIL targets log space, not grant space
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Currently the AIL attempts to keep 25% of the "log space" free, where the current used space is tracked by the reserve grant head. That is, it tracks both physical space used plus the amount reserved by transactions in progress.
When we start tail pushing, we are trying to make space for new reservations by writing back older metadata and the log is generally physically full of dirty metadata, and reservations for modifications in flight take up whatever space the AIL can physically free up.
Hence we don't really need to take into account the reservation space that has been used - we just need to keep the log tail moving as fast as we can to free up space for more reservations to be made. We know exactly how much physical space the journal is consuming in the AIL (i.e. max LSN - min LSN) so we can base push thresholds directly on AIL state rather than have to look at grant head reservations to determine how much to physically push out of the log.
COnvert the xfs_ail_push_target() to use physical log space for the calculation, and get rid of the need to look at any internal log at all to calculate the push targets.
--- fs/xfs/xfs_log_priv.h | 18 ++++++++++++ fs/xfs/xfs_trans_ail.c | 64 ++++++++++++++++++++---------------------- 2 files changed, 48 insertions(+), 34 deletions(-)
fs/xfs/xfs_log_priv.h +18 -0
@@ -622,6 +622,24 @@ xlog_wait(int xlog_wait_on_iclog (struct xlog_in_core *iclog); +/* Calculate the distance between two LSNs in bytes */ +static inline uint64_t +xlog_lsn_sub ( +struct xlog *log, +xfs_lsn_t high, +xfs_lsn_t low) +{ +uint32_t hi_cycle =CYCLE_LSN (high); +uint32_t hi_block =BLOCK_LSN (high); +uint32_t lo_cycle =CYCLE_LSN (low); +uint32_t lo_block =BLOCK_LSN (low); + +if (hi_cycle == lo_cycle) +return BBTOB (hi_block - lo_block); +ASSERT ((hi_cycle == lo_cycle +1 ) ||xlog_is_shutdown (log)); +return (uint64_t )log->l_logsize -BBTOB (lo_block - hi_block); +} +/* * The LSN is valid so long as it is behind the current LSN. If it isn't, this * means that the next log record that includes this metadata could have a
fs/xfs/xfs_trans_ail.c +30 -34
76 lines not on this page · raw message
Signature · 1 line
2.36.1
Re: [PATCH 2/8] xfs: AIL targets log space, not grant space
Quoted 1 line · Dave Chinner
COnvert the
xfs_ail_push_target()to use physical log space for the
s/COnvert/convert/
PATCH 3/8 xfs: ensure log tail is always up to date
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Whenever we write an iclog, we call xlog_assign_tail_lsn() to update the current tail before we write it into the iclog header. This means we have to take the AIL lock on every iclog write just to check if the tail of the log has moved.
This doesn't avoid races with log tail updates - the log tail could move immediately after we assign the tail to the iclog header and hence by the time the iclog reaches stable storage the tail LSN has moved forward in memory. Hence the log tail LSN in the iclog header is really just a point in time snapshot of the current state of the AIL.
With this in mind, if we simply update the in memory log->l_tail_lsn every time it changes in the AIL, there is no need to update the in memory value when we are writing it into an iclog - it will already be up-to-date in memory and checking the AIL again will not change this. Hence xlog_state_release_iclog() does not need to check the AIL to update the tail lsn and can just sample it directly without needing to take the AIL lock.
--- fs/xfs/xfs_log.c | 3 +-- fs/xfs/xfs_trans_ail.c | 16 ++++++++++++++-- 2 files changed, 15 insertions(+), 4 deletions(-)
fs/xfs/xfs_log.c +1 -2
@@ -529,7 +529,6 @@ xlog_state_release_iclog(struct xlog_in_core *iclog, struct xlog_ticket *ticket) { - xfs_lsn_t tail_lsn; bool last_ref;lockdep_assert_held (&log->l_icloglock);
@@ -544,7 +543,7 @@ xlog_state_release_iclog(if ((iclog->ic_state ==XLOG_STATE_WANT_SYNC || (iclog->ic_flags &XLOG_ICL_NEED_FUA )) && !iclog->ic_header.h_tail_lsn) { - tail_lsn =xlog_assign_tail_lsn (log->l_mp); +xfs_lsn_t tail_lsn =atomic64_read (&log->l_tail_lsn); iclog->ic_header.h_tail_lsn =cpu_to_be64 (tail_lsn); }
fs/xfs/xfs_trans_ail.c +14 -2
@@ -712,6 +712,12 @@ xfs_ail_push_all_sync(finish_wait (&ailp->ail_empty, &wait); } +/* +* Callers should pass the the original tail lsn so that we can detect if the +* tail has moved as a result of the operation that was performed. If the caller +* needs to force a tail LSN update, it should pass NULLCOMMITLSN to bypass the +* "did the tail LSN change?" checks. +*/ void xfs_ail_update_finish( struct xfs_ail *ailp,
@@ -796,10 +802,16 @@ xfs_trans_ail_update_bulk(/* * If this is the first insert, wake up the push daemon so it can -* actively scan for items to push. +* actively scan for items to push. We also need to do a log tail +* LSN update to ensure that it is correctly tracked by the log, so +* set the tail_lsn to NULLCOMMITLSN so that xfs_ail_update_finish() +* will see that the tail lsn has changed and will update the tail +* appropriately. */ -if (!mlip) +if (!mlip) {wake_up_process (ailp->ail_task); + tail_lsn =NULLCOMMITLSN ; + }xfs_ail_update_finish (ailp, tail_lsn); }
Signature · 1 line
2.36.1
Re: [PATCH 3/8] xfs: ensure log tail is always up to date
fs/xfs/xfs_log.c xlog_state_release_iclog( · line 547
Quoted 8 lines · Dave Chinner
fs/xfs/xfs_log.c +1
-1lockdep_assert_held (&log->l_icloglock);@@ -544,7 +543,7 @@ xlog_state_release_iclog(if ((iclog->ic_state ==XLOG_STATE_WANT_SYNC || (iclog->ic_flags &XLOG_ICL_NEED_FUA )) && !iclog->ic_header.h_tail_lsn) { - tail_lsn =xlog_assign_tail_lsn (log->l_mp); +xfs_lsn_t tail_lsn =atomic64_read (&log->l_tail_lsn); iclog->ic_header.h_tail_lsn =cpu_to_be64 (tail_lsn);
Nit: I'd just do this as:
iclog->ic_header.h_tail_lsn = cpu_to_be64(atomic64_read(&log->l_tail_lsn));
fs/xfs/xfs_trans_ail.c xfs_ail_push_all_sync( · line 720
Quoted 6 lines
fs/xfs/xfs_trans_ail.c +6
-0+/* +* Callers should pass the the original tail lsn so that we can detect if the +* tail has moved as a result of the operation that was performed. If the caller +* needs to force a tail LSN update, it should pass NULLCOMMITLSN to bypass the +* "did the tail LSN change?" checks. +*/
Should we also document the old_lsn == 0 case here?
Re: [PATCH 3/8] xfs: ensure log tail is always up to date
Quoted 15 lines · Christoph Hellwig
fs/xfs/xfs_log.c xlog_state_release_iclog( · line 547
Quoted 8 lines · Dave Chinner
fs/xfs/xfs_log.c +1
-1lockdep_assert_held (&log->l_icloglock);@@ -544,7 +543,7 @@ xlog_state_release_iclog(if ((iclog->ic_state ==XLOG_STATE_WANT_SYNC || (iclog->ic_flags &XLOG_ICL_NEED_FUA )) && !iclog->ic_header.h_tail_lsn) { - tail_lsn =xlog_assign_tail_lsn (log->l_mp); +xfs_lsn_t tail_lsn =atomic64_read (&log->l_tail_lsn); iclog->ic_header.h_tail_lsn =cpu_to_be64 (tail_lsn);Nit: I'd just do this as:
iclog->ic_header.h_tail_lsn = cpu_to_be64(atomic64_read(&log->l_tail_lsn));
Quoted 8 lines
fs/xfs/xfs_trans_ail.c xfs_ail_push_all_sync( · line 720
Quoted 6 lines
fs/xfs/xfs_trans_ail.c +6
-0+/* +* Callers should pass the the original tail lsn so that we can detect if the +* tail has moved as a result of the operation that was performed. If the caller +* needs to force a tail LSN update, it should pass NULLCOMMITLSN to bypass the +* "did the tail LSN change?" checks. +*/ Should we also document the
old_lsn== 0 case here?
I can, it's just the "tail did not change" value....
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 4/8 xfs: l_last_sync_lsn is really tracking AIL state
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The current implementation of xlog_assign_tail_lsn() assumes that when the AIL is empty, the log tail matches the LSN of the last written commit record. This is recorded in xlog_state_set_callback() as log->l_last_sync_lsn when the iclog state changes to XLOG_STATE_CALLBACK. This change is then immediately followed by running the callbacks on the iclog which then insert the log items into the AIL at the "commit lsn" of that checkpoint.
The "commit lsn" of the checkpoint is the LSN of the iclog that the commit record is place in. This is also the same iclog that the callback is attached to. Hence the log->l_last_sync_lsn is set to the same value as the commit lsn recorded for the checkpoint being inserted into the AIL and it effectively tracks the highest ever LSN that the AIL has seen.
This value is not used directly by the log. It was used to determine the maximum push threshold for AIL pushing to ensure we didn't set a push target larger than had been seen in the AIL, but the AIL now only needs to look at it's own internal state to set push targets.
The log itself tracks it's current head via the {current_lsn, current_block} tuple, so it doesn't need l_last_sync_lsn for tracking the head of the log. Hence nothing actually uses log->l_last_sync_lsn except for the tail assignment when the AIL is empty.
This "highest commit LSN" really doesn't need to be tracked by the log - the max LSN seen by the AIL can be easily tracked by the AIL and it can be used to set the log tail LSN correctly when the last item is removed from the AIL.
Therefore, move the highest committed LSN tracking to the AIL and remove l_last_sync_lsn from the log code.
--- fs/xfs/xfs_log.c | 94 +++++----------------------------------- fs/xfs/xfs_log_priv.h | 9 ++-- fs/xfs/xfs_log_recover.c | 19 ++++---- fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trace.h | 8 ++-- fs/xfs/xfs_trans_ail.c | 33 ++++++++++++-- fs/xfs/xfs_trans_priv.h | 13 ++++++ 7 files changed, 70 insertions(+), 107 deletions(-)
fs/xfs/xfs_log.c +11 -83
@@ -1236,47 +1236,6 @@ xfs_log_cover(return error; } -/* -* We may be holding the log iclog lock upon entering this routine. -*/ -xfs_lsn_t -xlog_assign_tail_lsn_locked ( -struct xfs_mount *mp) -{ -struct xlog *log = mp->m_log; -struct xfs_log_item *lip; -xfs_lsn_t tail_lsn; - -assert_spin_locked (&mp->m_ail->ail_lock); - -/* -* To make sure we always have a valid LSN for the log tail we keep -* track of the last LSN which was committed in log->l_last_sync_lsn, -* and use that when the AIL was empty. -*/ - lip =xfs_ail_min (mp->m_ail); -if (lip) - tail_lsn = lip->li_lsn; -else - tail_lsn =atomic64_read (&log->l_last_sync_lsn); -trace_xfs_log_assign_tail_lsn (log, tail_lsn); -atomic64_set (&log->l_tail_lsn, tail_lsn); -return tail_lsn; -} - -xfs_lsn_t -xlog_assign_tail_lsn ( -struct xfs_mount *mp) -{ -xfs_lsn_t tail_lsn; - -spin_lock (&mp->m_ail->ail_lock); - tail_lsn =xlog_assign_tail_lsn_locked (mp); -spin_unlock (&mp->m_ail->ail_lock); - -return tail_lsn; -} -/* * Return the space in the log between the tail and the head. The head * is passed in the cycle/bytes formal parms. In the special case where
@@ -1510,7 +1469,6 @@ xlog_alloc_log( log->l_prev_block =-1 ;/* log->l_tail_lsn = 0x100000000LL; cycle = 1; current block = 0 */ xlog_assign_atomic_lsn (&log->l_tail_lsn,1 ,0 ); -xlog_assign_atomic_lsn (&log->l_last_sync_lsn,1 ,0 ); log->l_curr_cycle =1 ;/* 0 is bad since this is initial value */ if (xfs_has_logv2 (mp) && mp->m_sb.sb_logsunit >1 )
@@ -2561,46 +2519,6 @@ xlog_get_lowest_lsn(return lowest_lsn; } -/* -* Completion of a iclog IO does not imply that a transaction has completed, as -* transactions can be large enough to span many iclogs. We cannot change the -* tail of the log half way through a transaction as this may be the only -* transaction in the log and moving the tail to point to the middle of it -* will prevent recovery from finding the start of the transaction. Hence we -* should only update the last_sync_lsn if this iclog contains transaction -* completion callbacks on it. -* -* We have to do this before we drop the icloglock to ensure we are the only one -* that can update it. -* -* If we are moving the last_sync_lsn forwards, we also need to ensure we kick -* the reservation grant head pushing. This is due to the fact that the push -* target is bound by the current last_sync_lsn value. Hence if we have a large -* amount of log space bound up in this committing transaction then the -* last_sync_lsn value may be the limiting factor preventing tail pushing from -* freeing space in the log. Hence once we've updated the last_sync_lsn we -* should push the AIL to ensure the push target (and hence the grant head) is -* no longer bound by the old log head location and can move forwards and make -* progress again. -*/ -static void -xlog_state_set_callback ( -struct xlog *log, -struct xlog_in_core *iclog, -xfs_lsn_t header_lsn) -{ -trace_xlog_iclog_callback (iclog, _RET_IP_); - iclog->ic_state =XLOG_STATE_CALLBACK ; - -ASSERT (XFS_LSN_CMP (atomic64_read (&log->l_last_sync_lsn), - header_lsn) <=0 ); - -if (list_empty_careful (&iclog->ic_callbacks)) -return ; - -atomic64_set (&log->l_last_sync_lsn, header_lsn); -} -/* * Return true if we need to stop processing, false to continue to the next * iclog. The caller will need to run callbacks if the iclog is returned in the
@@ -2632,7 +2550,17 @@ xlog_state_iodone_process_iclog( lowest_lsn =xlog_get_lowest_lsn (log);if (lowest_lsn &&XFS_LSN_CMP (lowest_lsn, header_lsn) <0 )return false; -xlog_state_set_callback (log, iclog, header_lsn); +/* +* If there are no callbacks on this iclog, we can mark it clean +* immediately and return. Otherwise we need to run the +* callbacks. +*/ +if (list_empty (&iclog->ic_callbacks)) { +xlog_state_clean_iclog (log, iclog); +return false; + } +trace_xlog_iclog_callback (iclog, _RET_IP_); + iclog->ic_state =XLOG_STATE_CALLBACK ;return false;default :/*
fs/xfs/xfs_log_priv.h +3 -6
@@ -426,13 +426,10 @@ struct xlog {int l_prev_block;/* previous logical log block */ /* -* l_last_sync_lsn and l_tail_lsn are atomics so they can be set and -* read without needing to hold specific locks. To avoid operations -* contending with other hot objects, place each of them on a separate -* cacheline. +* l_tail_lsn is atomic so it can be set and read without needing to +* hold specific locks. To avoid operations contending with other hot +* objects, it on a separate cacheline. */ -/* lsn of last LR on disk */ -atomic64_t l_last_sync_lsn____cacheline_aligned_in_smp ;/* lsn of 1st LR with unflushed * buffers */ atomic64_t l_tail_lsn____cacheline_aligned_in_smp ;
fs/xfs/xfs_log_recover.c +9 -10
@@ -1177,8 +1177,8 @@ xlog_check_unmount_rec(*/ xlog_assign_atomic_lsn (&log->l_tail_lsn, log->l_curr_cycle, after_umount_blk); -xlog_assign_atomic_lsn (&log->l_last_sync_lsn, - log->l_curr_cycle, after_umount_blk); + log->l_ailp->ail_max_seen_lsn = +atomic64_read (&log->l_tail_lsn); *tail_blk = after_umount_blk; *clean = true;
@@ -1212,7 +1212,7 @@ xlog_set_state(if (bump_cycle) log->l_curr_cycle++;atomic64_set (&log->l_tail_lsn,be64_to_cpu (rhead->h_tail_lsn)); -atomic64_set (&log->l_last_sync_lsn,be64_to_cpu (rhead->h_lsn)); + log->l_ailp->ail_max_seen_lsn =be64_to_cpu (rhead->h_lsn);xlog_assign_grant_head (&log->l_reserve_head.grant, log->l_curr_cycle,BBTOB (log->l_curr_block)); xlog_assign_grant_head(&log->l_write_head.grant, log->l_curr_cycle,
@@ -3281,14 +3281,13 @@ xlog_do_recover(/* * We now update the tail_lsn since much of the recovery has completed -* and there may be space available to use. If there were no extent -* or iunlinks, we can free up the entire log and set the tail_lsn to -* be the last_sync_lsn. This was set in xlog_find_tail to be the -* lsn of the last known good LR on disk. If there are extent frees -* or iunlinks they will have some entries in the AIL; so we look at -* the AIL to determine how to set the tail_lsn. +* and there may be space available to use. If there were no extent or +* iunlinks, we can free up the entire log. This was set in +* xlog_find_tail to be the lsn of the last known good LR on disk. If +* there are extent frees or iunlinks they will have some entries in the +* AIL; so we look at the AIL to determine how to set the tail_lsn. */ -xlog_assign_tail_lsn (mp); +xfs_ail_assign_tail_lsn (log->l_ailp);/* * Now that we've finished replaying all buffer and inode updates,
fs/xfs/xfs_trace.c +1 -0
@@ -22,6 +22,7 @@#include "xfs_trans.h" #include "xfs_log.h" #include "xfs_log_priv.h" +#include "xfs_trans_priv.h" #include "xfs_buf_item.h" #include "xfs_quota.h" #include "xfs_dquot_item.h"
fs/xfs/xfs_trace.h +4 -4
@@ -1383,19 +1383,19 @@ TRACE_EVENT(xfs_log_assign_tail_lsn, __field(dev_t, dev) __field(xfs_lsn_t, new_lsn) __field(xfs_lsn_t, old_lsn) -__field (xfs_lsn_t, last_sync_lsn) +__field (xfs_lsn_t, max_seen_lsn) ),TP_fast_assign ( __entry->dev = log->l_mp->m_super->s_dev; __entry->new_lsn = new_lsn; __entry->old_lsn =atomic64_read (&log->l_tail_lsn); - __entry->last_sync_lsn =atomic64_read (&log->l_last_sync_lsn); + __entry->max_seen_lsn = log->l_ailp->ail_max_seen_lsn; ), - TP_printk("dev %d:%d new tail lsn %d/%d, old lsn %d/%d, last sync %d/%d", + TP_printk("dev %d:%d new tail lsn %d/%d, old lsn %d/%d, max lsn %d/%d", MAJOR(__entry->dev), MINOR(__entry->dev), CYCLE_LSN(__entry->new_lsn), BLOCK_LSN(__entry->new_lsn), CYCLE_LSN(__entry->old_lsn), BLOCK_LSN(__entry->old_lsn), - CYCLE_LSN(__entry->last_sync_lsn), BLOCK_LSN(__entry->last_sync_lsn)) + CYCLE_LSN(__entry->max_seen_lsn), BLOCK_LSN(__entry->max_seen_lsn)) ) DECLARE_EVENT_CLASS(xfs_file_class,
fs/xfs/xfs_trans_ail.c +29 -4
@@ -712,6 +712,26 @@ xfs_ail_push_all_sync(finish_wait (&ailp->ail_empty, &wait); } +void +xfs_ail_update_tail_lsn ( +struct xfs_ail *ailp) +{ +struct xlog *log = ailp->ail_log; +xfs_lsn_t tail_lsn; + +assert_spin_locked (&ailp->ail_lock); + +if (xlog_is_shutdown (log)) +return ; + + tail_lsn =__xfs_ail_min_lsn (ailp); +if (!tail_lsn) + tail_lsn = ailp->ail_max_seen_lsn; + +trace_xfs_log_assign_tail_lsn (log, tail_lsn); +atomic64_set (&log->l_tail_lsn, tail_lsn); +} +/* * Callers should pass the the original tail lsn so that we can detect if the * tail has moved as a result of the operation that was performed. If the caller
@@ -725,15 +745,13 @@ xfs_ail_update_finish( {struct xlog *log = ailp->ail_log; -/* if the tail lsn hasn't changed, don't do updates or wakeups. */ +/* If the tail lsn hasn't changed, don't do updates or wakeups. */ if (!old_lsn || old_lsn ==__xfs_ail_min_lsn (ailp)) {spin_unlock (&ailp->ail_lock);return ; } -if (!xlog_is_shutdown (log)) -xlog_assign_tail_lsn_locked (log->l_mp); - +xfs_ail_update_tail_lsn (ailp);if (list_empty (&ailp->ail_head))wake_up_all (&ailp->ail_empty);spin_unlock (&ailp->ail_lock);
@@ -800,6 +818,13 @@ xfs_trans_ail_update_bulk(if (!list_empty (&tmp))xfs_ail_splice (ailp, cur, &tmp, lsn); +/* +* If this is the highest LSN we've seen in the AIL, update the tracking +* so that we know what to set the tail to when the AIL is next emptied. +*/ +if (XFS_LSN_CMP (lsn, ailp->ail_max_seen_lsn) >0 ) + ailp->ail_max_seen_lsn = lsn; +/* * If this is the first insert, wake up the push daemon so it can * actively scan for items to push. We also need to do a log tail
fs/xfs/xfs_trans_priv.h +13 -0
@@ -58,6 +58,7 @@ struct xfs_ail {struct list_head ail_cursors;spinlock_t ail_lock;xfs_lsn_t ail_last_pushed_lsn; +xfs_lsn_t ail_max_seen_lsn;int ail_log_flush;unsigned long ail_opstate;struct list_head ail_buf_list;
@@ -138,6 +139,18 @@ struct xfs_log_item * xfs_trans_ail_cursor_next(struct xfs_ail *ailp, struct xfs_ail_cursor *cur);void xfs_trans_ail_cursor_done (struct xfs_ail_cursor *cur); +void xfs_ail_update_tail_lsn (struct xfs_ail *ailp); + +static inline void +xfs_ail_assign_tail_lsn ( +struct xfs_ail *ailp) +{ + +spin_lock (&ailp->ail_lock); +xfs_ail_update_tail_lsn (ailp); +spin_unlock (&ailp->ail_lock); +} +#if BITS_PER_LONG !=64 static inline void xfs_trans_ail_copy_lsn(
Signature · 1 line
2.36.1
Re: [PATCH 4/8] xfs: l_last_sync_lsn is really tracking AIL state
fs/xfs/xfs_log.c xlog_state_iodone_process_iclog( · line 2563
Quoted 11 lines · Dave Chinner
fs/xfs/xfs_log.c +11
-0+/* +* If there are no callbacks on this iclog, we can mark it clean +* immediately and return. Otherwise we need to run the +* callbacks. +*/ +if (list_empty (&iclog->ic_callbacks)) { +xlog_state_clean_iclog (log, iclog); +return false; + } +trace_xlog_iclog_callback (iclog, _RET_IP_); + iclog->ic_state =XLOG_STATE_CALLBACK ;
Can you split the optimization of skipping the XLOG_STATE_CALLBACK state out? It seems unrelated to the rest and really confused me when trying to understand this patch.
fs/xfs/xfs_trans_priv.h struct xfs_log_item * xfs_trans_ail_cursor_next(struct xfs_ail *ailp, · line 152
Quoted 9 lines
fs/xfs/xfs_trans_priv.h +9
-0+static inline void +xfs_ail_assign_tail_lsn ( +struct xfs_ail *ailp) +{ + +spin_lock (&ailp->ail_lock); +xfs_ail_update_tail_lsn (ailp); +spin_unlock (&ailp->ail_lock); +}
This naming scheme seems a lot more confusing than the old _locked suffix or the __ prefix.
Re: [PATCH 4/8] xfs: l_last_sync_lsn is really tracking AIL state
Quoted 16 lines · Christoph Hellwig
fs/xfs/xfs_log.c xlog_state_iodone_process_iclog( · line 2563
Quoted 11 lines · Dave Chinner
fs/xfs/xfs_log.c +11
-0+/* +* If there are no callbacks on this iclog, we can mark it clean +* immediately and return. Otherwise we need to run the +* callbacks. +*/ +if (list_empty (&iclog->ic_callbacks)) { +xlog_state_clean_iclog (log, iclog); +return false; + } +trace_xlog_iclog_callback (iclog, _RET_IP_); + iclog->ic_state =XLOG_STATE_CALLBACK ;Can you split the optimization of skipping the
XLOG_STATE_CALLBACKstate out? It seems unrelated to the rest and really confused me when trying to understand this patch.
OK.
Quoted 13 lines
fs/xfs/xfs_trans_priv.h struct xfs_log_item * xfs_trans_ail_cursor_next(struct xfs_ail *ailp, · line 152
Quoted 10 lines
fs/xfs/xfs_trans_priv.h +9
-0+static inline void +xfs_ail_assign_tail_lsn ( +struct xfs_ail *ailp) +{ + +spin_lock (&ailp->ail_lock); +xfs_ail_update_tail_lsn (ailp); +spin_unlock (&ailp->ail_lock); +}This naming scheme seems a lot more confusing than the old
_lockedsuffix or the __ prefix.
Easy enough.
-Dave.
Signature · 2 lines
Dave Chinner [email protected]
Re: [PATCH 4/8] xfs: l_last_sync_lsn is really tracking AIL state
In reply to Dave ChinnerQuoted 28 lines · Dave Chinner
From: Dave Chinner <[email protected]>
The current implementation of
xlog_assign_tail_lsn()assumes that when the AIL is empty, the log tail matches the LSN of the last written commit record. This is recorded inxlog_state_set_callback()aslog->l_last_sync_lsnwhen the iclog state changes toXLOG_STATE_CALLBACK. This change is then immediately followed by running the callbacks on the iclog which then insert the log items into the AIL at the "commit lsn" of that checkpoint.The "commit lsn" of the checkpoint is the LSN of the iclog that the commit record is place in. This is also the same iclog that the callback is attached to. Hence the
log->l_last_sync_lsnis set to the same value as the commit lsn recorded for the checkpoint being inserted into the AIL and it effectively tracks the highest ever LSN that the AIL has seen.This value is not used directly by the log. It was used to determine the maximum push threshold for AIL pushing to ensure we didn't set a push target larger than had been seen in the AIL, but the AIL now only needs to look at it's own internal state to set push targets.
The log itself tracks it's current head via the {
current_lsn,current_block} tuple, so it doesn't needl_last_sync_lsnfor tracking the head of the log. Hence nothing actually useslog->l_last_sync_lsnexcept for the tail assignment when the AIL is empty.
Quoted 4 lines
This "highest commit LSN" really doesn't need to be tracked by the log - the max LSN seen by the AIL can be easily tracked by the AIL and it can be used to set the log tail LSN correctly when the last item is removed from the AIL.
Ok, there's a fundamental flaw in this patch: the AIL doesn't track the commit record LSN of log items, it tracks the *start record LSN* of the checkpoint.
l_last_sync_lsn is the highest commit record lsn seen by the log, whilst ailp->ail_max_seen_lsn tracks the highest start record lsn. The difference between the two is the size of the checkpoint, and this means by the end of the patch the grant head space that is tracked does not have the space used by the last checkpoint committed removed from it.
i.e. grant head space won't go to zero even when the CIL is empty and there are no transactions in flight - the log needs to be covered for it to drop to the size of the last iclog written to the log during covering operations.
This causes problems with small logs - there may be space in the log for new reservations, but because the grant space doesn't get decremented by a log force flushing the CIL correctly, xlog_space_left() doesn't actually report them as free and so reservations stall until the log is covered some 30s later. Then the same thing happens again short while later...
Essentially, this patch needs to be reworked - l_last_sync_lsn needs to stay, but the location that is updated at needs to change to the CIL commit callbacks so we can update it while holding the AIL lock and then it doesn't needs to be an atomic variable....
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 5/8 xfs: track log space pinned by the AIL
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Currently we track space used in the log by grant heads. These store the reserved space as a physical log location and combine both space reserved for future use with space already used in the log in a single variable. The amount of space consumed in the log is then calculated as the distance between the log tail and the grant head.
The problem with tracking the grant head as a physical location comes from the fact that it tracks both log cycle count and offset into the log in bytes in a single 64 bit variable. because the cycle count on disk is a 32 bit number, this also limits the offset into the log to 32 bits. ANd because that is in bytes, we are limited to being able to track only 2GB of log space in the grant head.
Hence to support larger physical logs, we need to track used space differently in the grant head. We no longer use the grant head for guiding AIL pushing, so the only thing it is now used for is determining if we've run out of reservation space via the calculation in xlog_space_left().
What we really need to do is move the grant heads away from tracking physical space in the log. The issue here is that space consumed in the log is not directly tracked by the current mechanism - the space consumed in the log by grant head reservations gets returned to the free pool by the tail of the log moving forward. i.e. the space isn't directly tracked or calculated, but the used grant space gets "freed" as the physical limits of the log are updated without actually needing to update the grant heads.
Hence to move away from implicit, zero-update log space tracking we need to explicitly track the amount of physical space the log actually consumes separately to the in-memory reservations for operations that will be committed to the journal. Luckily, we already track the information we need to calculate this in the AIL itself.
That is, the space currently consumed by the journal is the maximum LSN that the AIL has seen minus the current log tail. As we update both of these items dynamically as the head and tail of the log moves, we always know exactly how much space the journal consumes.
This means that we also know exactly how much space the currently active reservations require, and exactly how much free space we have remaining for new reservations to be made. Most importantly, we know what these spaces are indepedently of the physical locations of the head and tail of the log.
Hence by separating out the physical space consumed by the journal, we can now track reservations in the grant heads purely as a byte count, and the log can be considered full when the tail space + reservation space exceeds the size of the log. This means we can use the full 64 bits of grant head space for reservation space, completely removing the 32 bit byte count limitation on log size that they impose.
Hence the first step in this conversion is to track and update the "log tail space" every time the AIL tail or maximum seen LSN changes.
--- fs/xfs/xfs_log_priv.h | 1 + fs/xfs/xfs_log_recover.c | 2 ++ fs/xfs/xfs_trans_ail.c | 8 ++++++-- 3 files changed, 9 insertions(+), 2 deletions(-)
fs/xfs/xfs_log_priv.h +1 -0
@@ -435,6 +435,7 @@ struct xlog {struct xlog_grant_head l_reserve_head;struct xlog_grant_head l_write_head; +uint64_t l_tail_space;struct xfs_kobj l_kobj;
fs/xfs/xfs_log_recover.c +2 -0
@@ -1213,6 +1213,8 @@ xlog_set_state( log->l_curr_cycle++;atomic64_set (&log->l_tail_lsn,be64_to_cpu (rhead->h_tail_lsn)); log->l_ailp->ail_max_seen_lsn =be64_to_cpu (rhead->h_lsn); +WRITE_ONCE (log->l_tail_space,atomic64_read (&log->l_tail_lsn) - + log->l_ailp->ail_max_seen_lsn);xlog_assign_grant_head (&log->l_reserve_head.grant, log->l_curr_cycle,BBTOB (log->l_curr_block)); xlog_assign_grant_head(&log->l_write_head.grant, log->l_curr_cycle,
fs/xfs/xfs_trans_ail.c +6 -2
@@ -728,6 +728,8 @@ xfs_ail_update_tail_lsn(if (!tail_lsn) tail_lsn = ailp->ail_max_seen_lsn; +WRITE_ONCE (log->l_tail_space, +xlog_lsn_sub (log, ailp->ail_max_seen_lsn, tail_lsn));trace_xfs_log_assign_tail_lsn (log, tail_lsn);atomic64_set (&log->l_tail_lsn, tail_lsn); }
@@ -735,7 +737,7 @@ xfs_ail_update_tail_lsn(/* * Callers should pass the the original tail lsn so that we can detect if the * tail has moved as a result of the operation that was performed. If the caller -* needs to force a tail LSN update, it should pass NULLCOMMITLSN to bypass the +* needs to force a tail space update, it should pass NULLCOMMITLSN to bypass the * "did the tail LSN change?" checks. */ void
@@ -822,8 +824,10 @@ xfs_trans_ail_update_bulk(* If this is the highest LSN we've seen in the AIL, update the tracking * so that we know what to set the tail to when the AIL is next emptied. */ -if (XFS_LSN_CMP (lsn, ailp->ail_max_seen_lsn) >0 ) +if (XFS_LSN_CMP (lsn, ailp->ail_max_seen_lsn) >0 ) { ailp->ail_max_seen_lsn = lsn; + tail_lsn =NULLCOMMITLSN ; + }/* * If this is the first insert, wake up the push daemon so it can
Signature · 1 line
2.36.1
Re: [PATCH 5/8] xfs: track log space pinned by the AIL
Hmm. How does a patch to just update the new field, but not actually use it make much sense?
Re: [PATCH 5/8] xfs: track log space pinned by the AIL
Quoted 2 lines · Christoph Hellwig
Hmm. How does a patch to just update the new field, but not actually use it make much sense?
It's the commit message that requires it to be a separate patch, not the code. The commit message describes the architectural change that the new grant head accounting is built on. While the code to implement the accounting is simple, the reasons behind doing this and how the new reservation accounting will work is anything but simple.
IOWs, rather than try to explain all this in the already extremely complex "use byte accounting for grant heads" changeover patch, I separated this new accounting mechanism into it's own patch so it is easier for people to understand how the log tail space is being calculated and therefore determine if the mechanism is correct without having to worry about it being hidden amongst all the other changes that the grant head accounting require....
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 6/8 xfs: pass the full grant head to accounting functions
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Because we are going to need them soon. API change only, no logic changes.
--- fs/xfs/xfs_log.c | 157 +++++++++++++++++++++--------------------- fs/xfs/xfs_log_priv.h | 2 - 2 files changed, 77 insertions(+), 82 deletions(-)
fs/xfs/xfs_log.c +77 -80
@@ -136,10 +136,10 @@ xlog_prepare_iovec(static void xlog_grant_sub_space (struct xlog *log, -atomic64_t *head, +struct xlog_grant_head *head,int bytes) { -int64_t head_val =atomic64_read (head); +int64_t head_val =atomic64_read (&head->grant);int64_t new, old; do {
@@ -155,17 +155,17 @@ xlog_grant_sub_space( old = head_val; new =xlog_assign_grant_head_val (cycle, space); - head_val =atomic64_cmpxchg (head, old, new); + head_val =atomic64_cmpxchg (&head->grant, old, new); }while (head_val != old); }static void xlog_grant_add_space (struct xlog *log, -atomic64_t *head, +struct xlog_grant_head *head,int bytes) { -int64_t head_val =atomic64_read (head); +int64_t head_val =atomic64_read (&head->grant);int64_t new, old; do {
@@ -184,7 +184,7 @@ xlog_grant_add_space( old = head_val; new =xlog_assign_grant_head_val (cycle, space); - head_val =atomic64_cmpxchg (head, old, new); + head_val =atomic64_cmpxchg (&head->grant, old, new); }while (head_val != old); }
@@ -197,6 +197,63 @@ xlog_grant_head_init(spin_lock_init (&head->lock); } +/* +* Return the space in the log between the tail and the head. The head +* is passed in the cycle/bytes formal parms. In the special case where +* the reserve head has wrapped passed the tail, this calculation is no +* longer valid. In this case, just return 0 which means there is no space +* in the log. This works for all places where this function is called +* with the reserve head. Of course, if the write head were to ever +* wrap the tail, we should blow up. Rather than catch this case here, +* we depend on other ASSERTions in other parts of the code. XXXmiken +* +* If reservation head is behind the tail, we have a problem. Warn about it, +* but then treat it as if the log is empty. +* +* If the log is shut down, the head and tail may be invalid or out of whack, so +* shortcut invalidity asserts in this case so that we don't trigger them +* falsely. +*/ +static int +xlog_grant_space_left ( +struct xlog *log, +struct xlog_grant_head *head) +{ +int tail_bytes; +int tail_cycle; +int head_cycle; +int head_bytes; + +xlog_crack_grant_head (&head->grant, &head_cycle, &head_bytes); +xlog_crack_atomic_lsn (&log->l_tail_lsn, &tail_cycle, &tail_bytes); + tail_bytes =BBTOB (tail_bytes); +if (tail_cycle == head_cycle && head_bytes >= tail_bytes) +return log->l_logsize - (head_bytes - tail_bytes); +if (tail_cycle +1 < head_cycle) +return 0 ; + +/* Ignore potential inconsistency when shutdown. */ +if (xlog_is_shutdown (log)) +return log->l_logsize; + +if (tail_cycle < head_cycle) { +ASSERT (tail_cycle == (head_cycle -1 )); +return tail_bytes - head_bytes; + } + +/* +* The reservation head is behind the tail. In this case we just want to +* return the size of the log as the amount of space left. +*/ +xfs_alert (log->l_mp,"xlog_grant_space_left: head behind tail" ); +xfs_alert (log->l_mp," tail_cycle = %d, tail_bytes = %d" , + tail_cycle, tail_bytes); +xfs_alert (log->l_mp," GH cycle = %d, GH bytes = %d" , + head_cycle, head_bytes); +ASSERT (0 ); +return log->l_logsize; +} + STATIC voidxlog_grant_head_wake_all (struct xlog_grant_head *head)
@@ -276,7 +333,7 @@ xlog_grant_head_wait(spin_lock (&head->lock);if (xlog_is_shutdown (log)) goto shutdown; - }while (xlog_space_left (log, &head->grant) < need_bytes); + }while (xlog_grant_space_left (log, head) < need_bytes);list_del_init (&tic->t_queue);return 0 ;
@@ -321,7 +378,7 @@ xlog_grant_head_check(* otherwise try to get some space for this transaction. */ *need_bytes =xlog_ticket_reservation (log, head, tic); - free_bytes =xlog_space_left (log, &head->grant); + free_bytes =xlog_grant_space_left (log, head);if (!list_empty_careful (&head->waiters)) {spin_lock (&head->lock); if (!xlog_grant_head_wake(log, head, &free_bytes) ||
@@ -395,7 +452,7 @@ xfs_log_regrant(if (error) goto out_error; -xlog_grant_add_space (log, &log->l_write_head.grant, need_bytes); +xlog_grant_add_space (log, &log->l_write_head, need_bytes);trace_xfs_log_regrant_exit (log, tic);xlog_verify_grant_tail (log);return 0 ;
@@ -446,8 +503,8 @@ xfs_log_reserve(if (error) goto out_error; -xlog_grant_add_space (log, &log->l_reserve_head.grant, need_bytes); -xlog_grant_add_space (log, &log->l_write_head.grant, need_bytes); +xlog_grant_add_space (log, &log->l_reserve_head, need_bytes); +xlog_grant_add_space (log, &log->l_write_head, need_bytes);trace_xfs_log_reserve_exit (log, tic);xlog_verify_grant_tail (log);return 0 ;
@@ -1113,7 +1170,7 @@ xfs_log_space_wake(ASSERT (!xlog_in_recovery (log));spin_lock (&log->l_write_head.lock); - free_bytes =xlog_space_left (log, &log->l_write_head.grant); + free_bytes =xlog_grant_space_left (log, &log->l_write_head);xlog_grant_head_wake (log, &log->l_write_head, &free_bytes);spin_unlock (&log->l_write_head.lock); }
@@ -1122,7 +1179,7 @@ xfs_log_space_wake(ASSERT (!xlog_in_recovery (log));spin_lock (&log->l_reserve_head.lock); - free_bytes =xlog_space_left (log, &log->l_reserve_head.grant); + free_bytes =xlog_grant_space_left (log, &log->l_reserve_head);xlog_grant_head_wake (log, &log->l_reserve_head, &free_bytes);spin_unlock (&log->l_reserve_head.lock); }
@@ -1236,64 +1293,6 @@ xfs_log_cover(return error; } -/* -* Return the space in the log between the tail and the head. The head -* is passed in the cycle/bytes formal parms. In the special case where -* the reserve head has wrapped passed the tail, this calculation is no -* longer valid. In this case, just return 0 which means there is no space -* in the log. This works for all places where this function is called -* with the reserve head. Of course, if the write head were to ever -* wrap the tail, we should blow up. Rather than catch this case here, -* we depend on other ASSERTions in other parts of the code. XXXmiken -* -* If reservation head is behind the tail, we have a problem. Warn about it, -* but then treat it as if the log is empty. -* -* If the log is shut down, the head and tail may be invalid or out of whack, so -* shortcut invalidity asserts in this case so that we don't trigger them -* falsely. -*/ -int -xlog_space_left ( -struct xlog *log, -atomic64_t *head) -{ -int tail_bytes; -int tail_cycle; -int head_cycle; -int head_bytes; - -xlog_crack_grant_head (head, &head_cycle, &head_bytes); -xlog_crack_atomic_lsn (&log->l_tail_lsn, &tail_cycle, &tail_bytes); - tail_bytes =BBTOB (tail_bytes); -if (tail_cycle == head_cycle && head_bytes >= tail_bytes) -return log->l_logsize - (head_bytes - tail_bytes); -if (tail_cycle +1 < head_cycle) -return 0 ; - -/* Ignore potential inconsistency when shutdown. */ -if (xlog_is_shutdown (log)) -return log->l_logsize; - -if (tail_cycle < head_cycle) { -ASSERT (tail_cycle == (head_cycle -1 )); -return tail_bytes - head_bytes; - } - -/* -* The reservation head is behind the tail. In this case we just want to -* return the size of the log as the amount of space left. -*/ -xfs_alert (log->l_mp,"xlog_space_left: head behind tail" ); -xfs_alert (log->l_mp," tail_cycle = %d, tail_bytes = %d" , - tail_cycle, tail_bytes); -xfs_alert (log->l_mp," GH cycle = %d, GH bytes = %d" , - head_cycle, head_bytes); -ASSERT (0 ); -return log->l_logsize; -} - -static void xlog_ioend_work (struct work_struct *work)
@@ -1882,8 +1881,8 @@ xlog_sync(if (ticket) { ticket->t_curr_res -= roundoff; }else { -xlog_grant_add_space (log, &log->l_reserve_head.grant, roundoff); -xlog_grant_add_space (log, &log->l_write_head.grant, roundoff); +xlog_grant_add_space (log, &log->l_reserve_head, roundoff); +xlog_grant_add_space (log, &log->l_write_head, roundoff); }/* put cycle number in every block */
@@ -2814,17 +2813,15 @@ xfs_log_ticket_regrant(if (ticket->t_cnt >0 ) ticket->t_cnt--; -xlog_grant_sub_space (log, &log->l_reserve_head.grant, - ticket->t_curr_res); -xlog_grant_sub_space (log, &log->l_write_head.grant, - ticket->t_curr_res); +xlog_grant_sub_space (log, &log->l_reserve_head, ticket->t_curr_res); +xlog_grant_sub_space (log, &log->l_write_head, ticket->t_curr_res); ticket->t_curr_res = ticket->t_unit_res;trace_xfs_log_ticket_regrant_sub (log, ticket);/* just return if we still have some of the pre-reserved space */ if (!ticket->t_cnt) { -xlog_grant_add_space (log, &log->l_reserve_head.grant, +xlog_grant_add_space (log, &log->l_reserve_head, ticket->t_unit_res);trace_xfs_log_ticket_regrant_exit (log, ticket);
@@ -2872,8 +2869,8 @@ xfs_log_ticket_ungrant( bytes += ticket->t_unit_res*ticket->t_cnt; } -xlog_grant_sub_space (log, &log->l_reserve_head.grant, bytes); -xlog_grant_sub_space (log, &log->l_write_head.grant, bytes); +xlog_grant_sub_space (log, &log->l_reserve_head, bytes); +xlog_grant_sub_space (log, &log->l_write_head, bytes);trace_xfs_log_ticket_ungrant_exit (log, ticket);
fs/xfs/xfs_log_priv.h +0 -2
@@ -571,8 +571,6 @@ xlog_assign_grant_head(atomic64_t *head, int cycle, int space)atomic64_set (head,xlog_assign_grant_head_val (cycle, space)); } -int xlog_space_left (struct xlog *log,atomic64_t *head); -/* * Committed Item List interfaces */
Signature · 1 line
2.36.1
PATCH 7/8 xfs: move and xfs_trans_committed_bulk
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Ever since the CIL and delayed logging was introduced, xfs_trans_committed_bulk() has been a purely CIL checkpoint completion function and not a transaction commit completion function. Now that we are adding log specific updates to this function, it really does not have anything to do with the transaction subsystem - it is really log and log item level functionality.
This should be part of the CIL code as it is the callback that moves log items from the CIL checkpoint to the AIL. Move it and rename it to xlog_cil_ail_insert().
--- fs/xfs/xfs_log_cil.c | 132 +++++++++++++++++++++++++++++++++++++++- fs/xfs/xfs_trans.c | 129 --------------------------------------- fs/xfs/xfs_trans_priv.h | 3 - 3 files changed, 131 insertions(+), 133 deletions(-)
fs/xfs/xfs_log_cil.c +131 -1
@@ -683,6 +683,136 @@ xlog_cil_insert_items( } } +static inline void +xlog_cil_ail_insert_batch ( +struct xfs_ail *ailp, +struct xfs_ail_cursor *cur, +struct xfs_log_item **log_items, +int nr_items, +xfs_lsn_t commit_lsn) +{ +int i; + +spin_lock (&ailp->ail_lock); +/* xfs_trans_ail_update_bulk drops ailp->ail_lock */ +xfs_trans_ail_update_bulk (ailp, cur, log_items, nr_items, commit_lsn); + +for (i =0 ; i < nr_items; i++) { +struct xfs_log_item *lip = log_items[i]; + +if (lip->li_ops->iop_unpin) + lip->li_ops->iop_unpin (lip,0 ); + } +} + +/* +* Take the checkpoint's log vector chain of items and insert the attached log +* items into the the AIL. This uses bulk insertion techniques to minimise AIL +* lock traffic. +* +* If we are called with the aborted flag set, it is because a log write during +* a CIL checkpoint commit has failed. In this case, all the items in the +* checkpoint have already gone through iop_committed and iop_committing, which +* means that checkpoint commit abort handling is treated exactly the same as an +* iclog write error even though we haven't started any IO yet. Hence in this +* case all we need to do is iop_committed processing, followed by an +* iop_unpin(aborted) call. +* +* The AIL cursor is used to optimise the insert process. If commit_lsn is not +* at the end of the AIL, the insert cursor avoids the need to walk the AIL to +* find the insertion point on every xfs_log_item_batch_insert() call. This +* saves a lot of needless list walking and is a net win, even though it +* slightly increases that amount of AIL lock traffic to set it up and tear it +* down. +*/ +void +xlog_cil_ail_insert ( +struct xlog *log, +struct list_head *lv_chain, +xfs_lsn_t commit_lsn, +bool aborted) +{ +#define LOG_ITEM_BATCH_SIZE 32 +struct xfs_ail *ailp = log->l_ailp; +struct xfs_log_item *log_items[LOG_ITEM_BATCH_SIZE ]; +struct xfs_log_vec *lv; +struct xfs_ail_cursor cur; +int i =0 ; + +spin_lock (&ailp->ail_lock); +xfs_trans_ail_cursor_last (ailp, &cur, commit_lsn); +spin_unlock (&ailp->ail_lock); + +/* unpin all the log items */ +list_for_each_entry (lv, lv_chain, lv_list) { +struct xfs_log_item *lip = lv->lv_item; +xfs_lsn_t item_lsn; + +if (aborted) +set_bit (XFS_LI_ABORTED , &lip->li_flags); + +if (lip->li_ops->flags &XFS_ITEM_RELEASE_WHEN_COMMITTED ) { + lip->li_ops->iop_release (lip); +continue ; + } + +if (lip->li_ops->iop_committed) + item_lsn = lip->li_ops->iop_committed (lip, commit_lsn); +else + item_lsn = commit_lsn; + +/* item_lsn of -1 means the item needs no further processing */ +if (XFS_LSN_CMP (item_lsn, (xfs_lsn_t)-1 ) ==0 ) +continue ; + +/* +* if we are aborting the operation, no point in inserting the +* object into the AIL as we are in a shutdown situation. +*/ +if (aborted) { +ASSERT (xlog_is_shutdown (ailp->ail_log)); +if (lip->li_ops->iop_unpin) + lip->li_ops->iop_unpin (lip,1 ); +continue ; + } + +if (item_lsn != commit_lsn) { + +/* +* Not a bulk update option due to unusual item_lsn. +* Push into AIL immediately, rechecking the lsn once +* we have the ail lock. Then unpin the item. This does +* not affect the AIL cursor the bulk insert path is +* using. +*/ +spin_lock (&ailp->ail_lock); +if (XFS_LSN_CMP (item_lsn, lip->li_lsn) >0 ) +xfs_trans_ail_update (ailp, lip, item_lsn); +else +spin_unlock (&ailp->ail_lock); +if (lip->li_ops->iop_unpin) + lip->li_ops->iop_unpin (lip,0 ); +continue ; + } + +/* Item is a candidate for bulk AIL insert. */ + log_items[i++] = lv->lv_item; +if (i >=LOG_ITEM_BATCH_SIZE ) { +xlog_cil_ail_insert_batch (ailp, &cur, log_items, +LOG_ITEM_BATCH_SIZE , commit_lsn); + i =0 ; + } + } + +/* make sure we insert the remainder! */ +if (i) +xlog_cil_ail_insert_batch (ailp, &cur, log_items, i, commit_lsn); + +spin_lock (&ailp->ail_lock); +xfs_trans_ail_cursor_done (&cur); +spin_unlock (&ailp->ail_lock); +} +static void xlog_cil_free_logvec (struct list_head *lv_chain)
@@ -792,7 +922,7 @@ xlog_cil_committed(spin_unlock (&ctx->cil->xc_push_lock); } -xfs_trans_committed_bulk (ctx->cil->xc_log->l_ailp, &ctx->lv_chain, +xlog_cil_ail_insert (ctx->cil->xc_log, &ctx->lv_chain, ctx->start_lsn, abort);xfs_extent_busy_sort (&ctx->busy_extents);
fs/xfs/xfs_trans.c +0 -129
135 lines not on this page · raw message
fs/xfs/xfs_trans_priv.h +0 -3
@@ -19,9 +19,6 @@ void xfs_trans_add_item(struct xfs_trans *, struct xfs_log_item *);void xfs_trans_del_item (struct xfs_log_item *);void xfs_trans_unreserve_and_mod_sb (struct xfs_trans *tp); -void xfs_trans_committed_bulk (struct xfs_ail *ailp, -struct list_head *lv_chain, -xfs_lsn_t commit_lsn,bool aborted);/* * AIL traversal cursor. *
Signature · 1 line
2.36.1
kernel test robot
build botRe: [PATCH 7/8] xfs: move and xfs_trans_committed_bulk
Thank you for the patch! Perhaps something to improve:
Hi Dave,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on xfs-linux/for-next]
[cannot apply to linus/master v5.19-rc5 next-20220707]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: hexagon-randconfig-r041-20220707 (https://download.01.org/0day-ci/archive/20220708/[email protected]/config) compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 562c3467a6738aa89203f72fc1d1343e5baadf3c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/bebfeb694af01631b613b56003a60f7137f361ad
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642 git checkout bebfeb694af01631b613b56003a60f7137f361ad
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash fs/xfs/
If you fix the issue, kindly add following tag where applicable
All warnings (new ones prefixed by >>):
>> fs/xfs/xfs_log_cil.c:729:1: warning: no previous prototype for function 'xlog_cil_ail_insert' [-Wmissing-prototypes]
xlog_cil_ail_insert(
^
fs/xfs/xfs_log_cil.c:728:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void
^
static
1 warning generated.
vim +/xlog_cil_ail_insert +729 fs/xfs/xfs_log_cil.c
707
708 /*
709 * Take the checkpoint's log vector chain of items and insert the attached log
710 * items into the the AIL. This uses bulk insertion techniques to minimise AIL
711 * lock traffic.
712 *
713 * If we are called with the aborted flag set, it is because a log write during
714 * a CIL checkpoint commit has failed. In this case, all the items in the
715 * checkpoint have already gone through iop_committed and iop_committing, which
716 * means that checkpoint commit abort handling is treated exactly the same as an
717 * iclog write error even though we haven't started any IO yet. Hence in this
718 * case all we need to do is iop_committed processing, followed by an
719 * iop_unpin(aborted) call.
720 *
721 * The AIL cursor is used to optimise the insert process. If commit_lsn is not
722 * at the end of the AIL, the insert cursor avoids the need to walk the AIL to
723 * find the insertion point on every xfs_log_item_batch_insert() call. This
724 * saves a lot of needless list walking and is a net win, even though it
725 * slightly increases that amount of AIL lock traffic to set it up and tear it
726 * down.
727 */
728 void
> 729 xlog_cil_ail_insert(
730 struct xlog *log,
731 struct list_head *lv_chain,
732 xfs_lsn_t commit_lsn,
733 bool aborted)
734 {
735 #define LOG_ITEM_BATCH_SIZE 32
736 struct xfs_ail *ailp = log->l_ailp;
737 struct xfs_log_item *log_items[LOG_ITEM_BATCH_SIZE];
738 struct xfs_log_vec *lv;
739 struct xfs_ail_cursor cur;
740 int i = 0;
741
742 spin_lock(&ailp->ail_lock);
743 xfs_trans_ail_cursor_last(ailp, &cur, commit_lsn);
744 spin_unlock(&ailp->ail_lock);
745
746 /* unpin all the log items */
747 list_for_each_entry(lv, lv_chain, lv_list) {
748 struct xfs_log_item *lip = lv->lv_item;
749 xfs_lsn_t item_lsn;
750
751 if (aborted)
752 set_bit(XFS_LI_ABORTED, &lip->li_flags);
753
754 if (lip->li_ops->flags & XFS_ITEM_RELEASE_WHEN_COMMITTED) {
755 lip->li_ops->iop_release(lip);
756 continue;
757 }
758
759 if (lip->li_ops->iop_committed)
760 item_lsn = lip->li_ops->iop_committed(lip, commit_lsn);
761 else
762 item_lsn = commit_lsn;
763
764 /* item_lsn of -1 means the item needs no further processing */
765 if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0)
766 continue;
767
768 /*
769 * if we are aborting the operation, no point in inserting the
770 * object into the AIL as we are in a shutdown situation.
771 */
772 if (aborted) {
773 ASSERT(xlog_is_shutdown(ailp->ail_log));
774 if (lip->li_ops->iop_unpin)
775 lip->li_ops->iop_unpin(lip, 1);
776 continue;
777 }
778
779 if (item_lsn != commit_lsn) {
780
781 /*
782 * Not a bulk update option due to unusual item_lsn.
783 * Push into AIL immediately, rechecking the lsn once
784 * we have the ail lock. Then unpin the item. This does
785 * not affect the AIL cursor the bulk insert path is
786 * using.
787 */
788 spin_lock(&ailp->ail_lock);
789 if (XFS_LSN_CMP(item_lsn, lip->li_lsn) > 0)
790 xfs_trans_ail_update(ailp, lip, item_lsn);
791 else
792 spin_unlock(&ailp->ail_lock);
793 if (lip->li_ops->iop_unpin)
794 lip->li_ops->iop_unpin(lip, 0);
795 continue;
796 }
797
798 /* Item is a candidate for bulk AIL insert. */
799 log_items[i++] = lv->lv_item;
800 if (i >= LOG_ITEM_BATCH_SIZE) {
801 xlog_cil_ail_insert_batch(ailp, &cur, log_items,
802 LOG_ITEM_BATCH_SIZE, commit_lsn);
803 i = 0;
804 }
805 }
806
807 /* make sure we insert the remainder! */
808 if (i)
809 xlog_cil_ail_insert_batch(ailp, &cur, log_items, i, commit_lsn);
810
811 spin_lock(&ailp->ail_lock);
812 xfs_trans_ail_cursor_done(&cur);
813 spin_unlock(&ailp->ail_lock);
814 }
815
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
kernel test robot
build botRe: [PATCH 7/8] xfs: move and xfs_trans_committed_bulk
In reply to Dave ChinnerThank you for the patch! Perhaps something to improve:
Hi Dave,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on xfs-linux/for-next]
[cannot apply to linus/master v5.19-rc5 next-20220707]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642 base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next config: x86_64-randconfig-s021 (https://download.01.org/0day-ci/archive/20220708/[email protected]/config) compiler: gcc-11 (Debian 11.3.0-3) 11.3.0 reproduce: # apt-get install sparse # sparse version: v0.6.4-39-gce1a6720-dirty # https://github.com/intel-lab-lkp/linux/commit/bebfeb694af01631b613b56003a60f7137f361ad git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642 git checkout bebfeb694af01631b613b56003a60f7137f361ad # save the config file mkdir build_dir && cp config build_dir/.config make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=x86_64 SHELL=/bin/bash fs/xfs/
If you fix the issue, kindly add following tag where applicable
sparse warnings: (new ones prefixed by >>)
>> fs/xfs/xfs_log_cil.c:729:1: sparse: sparse: symbol 'xlog_cil_ail_insert' was not declared. Should it be static?
fs/xfs/xfs_log_cil.c:1306:1: sparse: sparse: context imbalance in 'xlog_cil_push_work' - different lock contexts for basic block fs/xfs/xfs_log_cil.c:1554:1: sparse: sparse: context imbalance in 'xlog_cil_push_background' - wrong count at exit fs/xfs/xfs_log_cil.c:1797:9: sparse: sparse: context imbalance in 'xlog_cil_commit' - unexpected unlock
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Re: [PATCH 7/8] xfs: move and xfs_trans_committed_bulk
In reply to Dave ChinnerThe subjet does not parse. The and should be dropped at very least.
Re: [PATCH 7/8] xfs: move and xfs_trans_committed_bulk
Quoted 1 line · Christoph Hellwig
The subjet does not parse. The and should be dropped at very least.
"move and rename" was what it was supposed to say.
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 8/8 xfs: grant heads track byte counts, not LSNs
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The grant heads in the log track the space reserved in the log for running transactions. They do this by tracking how far ahead of the tail that the reservation has reached, and the units for doing this are {cycle,bytes} for the reserve head rather than {cycle,blocks} which are normal used by LSNs.
This is annoyingly complex because we have to split, crack and combined these tuples for any calculation we do to determine log space and targets. This is computationally expensive as well as difficult to do atomically and locklessly, as well as limiting the size of the log to 2^32 bytes.
Really, though, all the grant heads are tracking is how much space is currently available for use in the log. We can track this as a simply byte count - we just don't care what the actual physical location in the log the head and tail are at, just how much space we have remaining before the head and tail overlap.
So, convert the grant heads to track the byte reservations that are active rather than the current (cycle, offset) tuples. This means an empty log has zero bytes consumed, and a full log is when the the reservations reach the size of the log minus the space consumed by the AIL.
This greatly simplifies the accounting and checks for whether there is space available. We no longer need to crack or combine LSNs to determine how much space the log has left, nor do we need to look at the head or tail of the log to determine how close to full we are.
There is, however, a complexity that needs to be handled. We know how much space is being tracked in the AIL now via log->l_tail_space and the log tickets track active reservations and return the unused portions to the grant heads when ungranted. Unfortunately, we don't track the used portion of the grant, so when we transfer log items from the CIL to the AIL, the space accounted to the grant heads is transferred to the log tail space. Hence when we move the AIL head forwards on item insert, we have to remove that space from the grant heads.
We also remove the xlog_verify_grant_tail() debug function as it is no l onger useful. The check it performs has been racy since delayed logging was introduced, but now it is clearly only detecting false positives so remove it.
The result of this substantially simpler accounting algorithm is an increase in sustained transaction rate from ~1.3 million transactions/s to ~1.9 million transactions/s with no increase in CPU usage. We also remove the 32 bit space limitation on the journal, which will allow us to increase the journal size beyond 2GB in future.
--- fs/xfs/xfs_log.c | 189 ++++++++++----------------------------- fs/xfs/xfs_log_priv.h | 33 +------ fs/xfs/xfs_log_recover.c | 4 - fs/xfs/xfs_sysfs.c | 17 ++-- fs/xfs/xfs_trace.h | 32 +++---- fs/xfs/xfs_trans_ail.c | 10 +++ 6 files changed, 84 insertions(+), 201 deletions(-)
fs/xfs/xfs_log.c +49 -140
@@ -53,9 +53,6 @@ xlog_sync( struct xlog_ticket *ticket);#if defined(DEBUG ) STATIC void -xlog_verify_grant_tail ( -struct xlog *log); -STATIC void xlog_verify_iclog( struct xlog *log, struct xlog_in_core *iclog,
@@ -65,7 +62,6 @@ xlog_verify_tail_lsn(struct xlog *log, struct xlog_in_core *iclog);#else -#define xlog_verify_grant_tail (a)#define xlog_verify_iclog (a,b,c)#define xlog_verify_tail_lsn (a,b)#endif
@@ -133,30 +129,13 @@ xlog_prepare_iovec(return buf; } -static void +void xlog_grant_sub_space (struct xlog *log,struct xlog_grant_head *head,int bytes) { -int64_t head_val =atomic64_read (&head->grant); -int64_t new, old; - -do { -int cycle, space; - -xlog_crack_grant_head_val (head_val, &cycle, &space); - - space -= bytes; -if (space <0 ) { - space += log->l_logsize; - cycle--; - } - - old = head_val; - new =xlog_assign_grant_head_val (cycle, space); - head_val =atomic64_cmpxchg (&head->grant, old, new); - }while (head_val != old); +atomic64_sub (bytes, &head->grant); } static void
@@ -165,93 +144,34 @@ xlog_grant_add_space(struct xlog_grant_head *head, int bytes) { - int64_t head_val = atomic64_read(&head->grant); -int64_t new, old; - -do { -int tmp; -int cycle, space; - -xlog_crack_grant_head_val (head_val, &cycle, &space); - - tmp = log->l_logsize - space; -if (tmp > bytes) - space += bytes; -else { - space = bytes - tmp; - cycle++; - } - - old = head_val; - new =xlog_assign_grant_head_val (cycle, space); - head_val =atomic64_cmpxchg (&head->grant, old, new); - }while (head_val != old); + atomic64_add(bytes, &head->grant); } -STATIC void +static void xlog_grant_head_init (struct xlog_grant_head *head) { -xlog_assign_grant_head (&head->grant,1 ,0 ); +atomic64_set (&head->grant,0 );INIT_LIST_HEAD (&head->waiters);spin_lock_init (&head->lock); }/* -* Return the space in the log between the tail and the head. The head -* is passed in the cycle/bytes formal parms. In the special case where -* the reserve head has wrapped passed the tail, this calculation is no -* longer valid. In this case, just return 0 which means there is no space -* in the log. This works for all places where this function is called -* with the reserve head. Of course, if the write head were to ever -* wrap the tail, we should blow up. Rather than catch this case here, -* we depend on other ASSERTions in other parts of the code. XXXmiken -* -* If reservation head is behind the tail, we have a problem. Warn about it, -* but then treat it as if the log is empty. -* -* If the log is shut down, the head and tail may be invalid or out of whack, so -* shortcut invalidity asserts in this case so that we don't trigger them -* falsely. +* Return the space in the log between the tail and the head. In the case where +* we have overrun available reservation space, return 0. */ -static int +static uint64_t xlog_grant_space_left (struct xlog *log,struct xlog_grant_head *head) { -int tail_bytes; -int tail_cycle; -int head_cycle; -int head_bytes; - -xlog_crack_grant_head (&head->grant, &head_cycle, &head_bytes); -xlog_crack_atomic_lsn (&log->l_tail_lsn, &tail_cycle, &tail_bytes); - tail_bytes =BBTOB (tail_bytes); -if (tail_cycle == head_cycle && head_bytes >= tail_bytes) -return log->l_logsize - (head_bytes - tail_bytes); -if (tail_cycle +1 < head_cycle) -return 0 ; - -/* Ignore potential inconsistency when shutdown. */ -if (xlog_is_shutdown (log)) -return log->l_logsize; +int64_t free_bytes; -if (tail_cycle < head_cycle) { -ASSERT (tail_cycle == (head_cycle -1 )); -return tail_bytes - head_bytes; - } - -/* -* The reservation head is behind the tail. In this case we just want to -* return the size of the log as the amount of space left. -*/ -xfs_alert (log->l_mp,"xlog_grant_space_left: head behind tail" ); -xfs_alert (log->l_mp," tail_cycle = %d, tail_bytes = %d" , - tail_cycle, tail_bytes); -xfs_alert (log->l_mp," GH cycle = %d, GH bytes = %d" , - head_cycle, head_bytes); -ASSERT (0 ); -return log->l_logsize; + free_bytes = log->l_logsize -READ_ONCE (log->l_tail_space) - +atomic64_read (&head->grant); +if (free_bytes >0 ) +return free_bytes; +return 0 ; }STATIC void
@@ -454,7 +374,6 @@ xfs_log_regrant(xlog_grant_add_space (log, &log->l_write_head, need_bytes);trace_xfs_log_regrant_exit (log, tic); -xlog_verify_grant_tail (log);return 0 ; out_error:
@@ -506,7 +425,6 @@ xfs_log_reserve(xlog_grant_add_space (log, &log->l_reserve_head, need_bytes);xlog_grant_add_space (log, &log->l_write_head, need_bytes);trace_xfs_log_reserve_exit (log, tic); -xlog_verify_grant_tail (log);return 0 ; out_error:
@@ -3342,42 +3260,27 @@ xlog_ticket_alloc( }#if defined(DEBUG ) -/* -* Check to make sure the grant write head didn't just over lap the tail. If -* the cycles are the same, we can't be overlapping. Otherwise, make sure that -* the cycles differ by exactly one and check the byte count. -* -* This check is run unlocked, so can give false positives. Rather than assert -* on failures, use a warn-once flag and a panic tag to allow the admin to -* determine if they want to panic the machine when such an error occurs. For -* debug kernels this will have the same effect as using an assert but, unlinke -* an assert, it can be turned off at runtime. -*/ -STATIC void -xlog_verify_grant_tail ( -struct xlog *log) +static void +xlog_verify_dump_tail ( +struct xlog *log, +struct xlog_in_core *iclog) { -int tail_cycle, tail_blocks; -int cycle, space; - -xlog_crack_grant_head (&log->l_write_head.grant, &cycle, &space); -xlog_crack_atomic_lsn (&log->l_tail_lsn, &tail_cycle, &tail_blocks); -if (tail_cycle != cycle) { -if (cycle -1 != tail_cycle && - !test_and_set_bit (XLOG_TAIL_WARN , &log->l_opstate)) { -xfs_alert_tag (log->l_mp,XFS_PTAG_LOGRES , -"%s: cycle - 1 != tail_cycle" , __func__); - } - -if (space >BBTOB (tail_blocks) && - !test_and_set_bit (XLOG_TAIL_WARN , &log->l_opstate)) { -xfs_alert_tag (log->l_mp,XFS_PTAG_LOGRES , -"%s: space > BBTOB(tail_blocks)" , __func__); - } - } -} - -/* check if it will fit */ +xfs_alert (log->l_mp, +"ran out of log space tail 0x%llx/0x%llx, max seen lsn 0x%llx, head 0x%x/0x%x, prev head 0x%x/0x%x" , + iclog ?be64_to_cpu (iclog->ic_header.h_tail_lsn) :-1 , +atomic64_read (&log->l_tail_lsn), + log->l_ailp->ail_max_seen_lsn, + log->l_curr_cycle, log->l_curr_block, + log->l_prev_cycle, log->l_prev_block); +xfs_alert (log->l_mp, +"write grant 0x%llx, reserve grant 0x%llx, tail_space 0x%llx, size 0x%x, iclog flags 0x%x" , +atomic64_read (&log->l_write_head.grant), +atomic64_read (&log->l_reserve_head.grant), + log->l_tail_space, log->l_logsize, + iclog ? iclog->ic_flags :-1 ); +} + +/* Check if the new iclog will fit in the log. */ STATIC void xlog_verify_tail_lsn( struct xlog *log,
@@ -3386,20 +3289,26 @@ xlog_verify_tail_lsn(xfs_lsn_t tail_lsn =be64_to_cpu (iclog->ic_header.h_tail_lsn);int blocks; -if (CYCLE_LSN (tail_lsn) == log->l_prev_cycle) { - blocks = - log->l_logBBsize - (log->l_prev_block -BLOCK_LSN (tail_lsn)); -if (blocks <BTOBB (iclog->ic_offset)+BTOBB (log->l_iclog_hsize)) -xfs_emerg (log->l_mp,"%s: ran out of log space" , __func__); - }else { -ASSERT (CYCLE_LSN (tail_lsn)+1 == log->l_prev_cycle); +if (CYCLE_LSN (tail_lsn) == log->l_prev_cycle) { + blocks = log->l_logBBsize - + (log->l_prev_block -BLOCK_LSN (tail_lsn)); +if (blocks <BTOBB (iclog->ic_offset) + +BTOBB (log->l_iclog_hsize)) { +xfs_emerg (log->l_mp, +"%s: ran out of log space" , __func__); +xlog_verify_dump_tail (log, iclog); + } +return ; + } +ASSERT (CYCLE_LSN (tail_lsn) +1 == log->l_prev_cycle);if (BLOCK_LSN (tail_lsn) == log->l_prev_block)xfs_emerg (log->l_mp,"%s: tail wrapped" , __func__); blocks =BLOCK_LSN (tail_lsn) - log->l_prev_block; -if (blocks <BTOBB (iclog->ic_offset) +1 ) -xfs_emerg (log->l_mp,"%s: ran out of log space" , __func__); +if (blocks <BTOBB (iclog->ic_offset) +1 ) { +xfs_emerg (log->l_mp,"%s: ran out of iclog space" , __func__); +xlog_verify_dump_tail (log, iclog); } }
fs/xfs/xfs_log_priv.h +3 -30
@@ -511,6 +511,9 @@ int xlog_write(struct xlog *log, struct xfs_cil_ctx *ctx,void xfs_log_ticket_ungrant (struct xlog *log,struct xlog_ticket *ticket);void xfs_log_ticket_regrant (struct xlog *log,struct xlog_ticket *ticket); +void xlog_grant_sub_space (struct xlog *log,struct xlog_grant_head *head, +int bytes); +void xlog_state_switch_iclogs (struct xlog *log,struct xlog_in_core *iclog,int eventual_size); int xlog_state_release_iclog(struct xlog *log, struct xlog_in_core *iclog,
@@ -541,36 +544,6 @@ xlog_assign_atomic_lsn(atomic64_t *lsn, uint cycle, uint block)atomic64_set (lsn,xlog_assign_lsn (cycle, block)); } -/* -* When we crack the grant head, we sample it first so that the value will not -* change while we are cracking it into the component values. This means we -* will always get consistent component values to work from. -*/ -static inline void -xlog_crack_grant_head_val (int64_t val,int *cycle,int *space) -{ - *cycle = val >>32 ; - *space = val &0xffffffff ; -} - -static inline void -xlog_crack_grant_head (atomic64_t *head,int *cycle,int *space) -{ -xlog_crack_grant_head_val (atomic64_read (head), cycle, space); -} - -static inline int64_t -xlog_assign_grant_head_val (int cycle,int space) -{ -return ((int64_t )cycle <<32 ) | space; -} - -static inline void -xlog_assign_grant_head (atomic64_t *head,int cycle,int space) -{ -atomic64_set (head,xlog_assign_grant_head_val (cycle, space)); -} -/* * Committed Item List interfaces */
fs/xfs/xfs_log_recover.c +0 -4
@@ -1215,10 +1215,6 @@ xlog_set_state( log->l_ailp->ail_max_seen_lsn =be64_to_cpu (rhead->h_lsn);WRITE_ONCE (log->l_tail_space,atomic64_read (&log->l_tail_lsn) - log->l_ailp->ail_max_seen_lsn); -xlog_assign_grant_head (&log->l_reserve_head.grant, log->l_curr_cycle, -BBTOB (log->l_curr_block)); -xlog_assign_grant_head (&log->l_write_head.grant, log->l_curr_cycle, -BBTOB (log->l_curr_block)); }/*
fs/xfs/xfs_sysfs.c +6 -11
@@ -376,14 +376,11 @@ STATIC ssize_treserve_grant_head_show ( struct kobject *kobject, char *buf) - { - int cycle; -int bytes; -struct xlog *log =to_xlog (kobject); + struct xlog *log = to_xlog(kobject); +uint64_t bytes =atomic64_read (&log->l_reserve_head.grant); -xlog_crack_grant_head (&log->l_reserve_head.grant, &cycle, &bytes); -return sysfs_emit (buf,"%d:%d\n" , cycle, bytes); +return sysfs_emit (buf,"%lld\n" , bytes); }XFS_SYSFS_ATTR_RO (reserve_grant_head);
@@ -392,12 +389,10 @@ write_grant_head_show(struct kobject *kobject, char *buf) { - int cycle; -int bytes; -struct xlog *log =to_xlog (kobject); + struct xlog *log = to_xlog(kobject); +uint64_t bytes =atomic64_read (&log->l_write_head.grant); -xlog_crack_grant_head (&log->l_write_head.grant, &cycle, &bytes); -return sysfs_emit (buf,"%d:%d\n" , cycle, bytes); +return sysfs_emit (buf,"%lld\n" , bytes); }XFS_SYSFS_ATTR_RO (write_grant_head);
fs/xfs/xfs_trace.h +16 -16
@@ -1206,6 +1206,7 @@ DECLARE_EVENT_CLASS(xfs_loggrant_class, TP_ARGS(log, tic),TP_STRUCT__entry (__field (dev_t ,dev ) + __field(unsigned long, tic)__field (char, ocnt)__field (char, cnt) __field(int, curr_res)
@@ -1213,16 +1214,16 @@ DECLARE_EVENT_CLASS(xfs_loggrant_class, __field(unsigned int, flags)__field (int ,reserveq )__field (int, writeq) -__field (int, grant_reserve_cycle) -__field (int, grant_reserve_bytes) -__field (int, grant_write_cycle) -__field (int, grant_write_bytes) +__field (uint64_t, grant_reserve_bytes) +__field (uint64_t, grant_write_bytes) +__field (uint64_t, tail_space)__field (int, curr_cycle)__field (int, curr_block)__field (xfs_lsn_t, tail_lsn) ), TP_fast_assign( __entry->dev = log->l_mp->m_super->s_dev; + __entry->tic = (unsigned long )tic; __entry->ocnt = tic->t_ocnt; __entry->cnt = tic->t_cnt; __entry->curr_res = tic->t_curr_res;
@@ -1230,23 +1231,23 @@ DECLARE_EVENT_CLASS(xfs_loggrant_class, __entry->flags = tic->t_flags; __entry->reserveq =list_empty (&log->l_reserve_head.waiters); __entry->writeq =list_empty (&log->l_write_head.waiters); -xlog_crack_grant_head (&log->l_reserve_head.grant, - &__entry->grant_reserve_cycle, - &__entry->grant_reserve_bytes); -xlog_crack_grant_head (&log->l_write_head.grant, - &__entry->grant_write_cycle, - &__entry->grant_write_bytes); + __entry->tail_space =READ_ONCE (log->l_tail_space); + __entry->grant_reserve_bytes = __entry->tail_space + +atomic64_read (&log->l_reserve_head.grant); + __entry->grant_write_bytes = __entry->tail_space + +atomic64_read (&log->l_write_head.grant); __entry->curr_cycle = log->l_curr_cycle; __entry->curr_block = log->l_curr_block; __entry->tail_lsn =atomic64_read (&log->l_tail_lsn); ), - TP_printk("dev %d:%d t_ocnt %u t_cnt %u t_curr_res %u " + TP_printk("dev %d:%d tic 0x%lx t_ocnt %u t_cnt %u t_curr_res %u " "t_unit_res %u t_flags %s reserveq %s " - "writeq %s grant_reserve_cycle %d " - "grant_reserve_bytes %d grant_write_cycle %d " - "grant_write_bytes %d curr_cycle %d curr_block %d " + "writeq %s " + "tail space %llu grant_reserve_bytes %llu " + "grant_write_bytes %llu curr_cycle %d curr_block %d " "tail_cycle %d tail_block %d", MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->tic, __entry->ocnt, __entry->cnt, __entry->curr_res,
@@ -1254,9 +1255,8 @@ DECLARE_EVENT_CLASS(xfs_loggrant_class,__print_flags (__entry->flags,"|" ,XLOG_TIC_FLAGS ), __entry->reserveq ?"empty" :"active" , __entry->writeq ?"empty" :"active" , - __entry->grant_reserve_cycle, + __entry->tail_space, __entry->grant_reserve_bytes, - __entry->grant_write_cycle, __entry->grant_write_bytes, __entry->curr_cycle, __entry->curr_block,
fs/xfs/xfs_trans_ail.c +10 -0
@@ -823,8 +823,18 @@ xfs_trans_ail_update_bulk(/* * If this is the highest LSN we've seen in the AIL, update the tracking * so that we know what to set the tail to when the AIL is next emptied. +* As the space will now be tracked by the log tail space rather than +* the grant heads, subtract the newly used log space from the grant +* heads. */ if (XFS_LSN_CMP (lsn, ailp->ail_max_seen_lsn) >0 ) { +struct xlog *log = ailp->ail_log; +int64_t diff; + + diff =xlog_lsn_sub (log, lsn, ailp->ail_max_seen_lsn); +xlog_grant_sub_space (log, &log->l_reserve_head, diff); +xlog_grant_sub_space (log, &log->l_write_head, diff); + ailp->ail_max_seen_lsn = lsn; tail_lsn =NULLCOMMITLSN ; }
Signature · 1 line
2.36.1
Re: [PATCH 8/8] xfs: grant heads track byte counts, not LSNs
Quoted 11 lines · Dave Chinner
fs/xfs/xfs_log.c +2
-0+void xlog_grant_sub_space (struct xlog *log,struct xlog_grant_head *head,int bytes) { +atomic64_sub (bytes, &head->grant); } static void
fs/xfs/xfs_log.c xlog_grant_add_space( · line 148
Quoted 5 lines
fs/xfs/xfs_log.c +1
-0@@ -165,93 +144,34 @@ xlog_grant_add_space(struct xlog_grant_head *head, int bytes) { + atomic64_add(bytes, &head->grant); }
These probably make more senses as inlines and can you can drop their log agument as well. Or maybe just drop these helpers entirely?
Re: [PATCH 8/8] xfs: grant heads track byte counts, not LSNs
Quoted 10 lines · Christoph Hellwig
Quoted 9 lines · Dave Chinner
fs/xfs/xfs_log.c +2
-0+void xlog_grant_sub_space (struct xlog *log,struct xlog_grant_head *head,int bytes) { +atomic64_sub (bytes, &head->grant); }
Quoted 10 lines
fs/xfs/xfs_log.c xlog_grant_add_space( · line 148
Quoted 7 lines
static void
fs/xfs/xfs_log.c +1
-0@@ -165,93 +144,34 @@ xlog_grant_add_space(struct xlog_grant_head *head, int bytes) { + atomic64_add(bytes, &head->grant); }These probably make more senses as inlines and can you can drop their log agument as well. Or maybe just drop these helpers entirely?
I didn't want to make the change even more complex by dropping the wrappers entirely. They do add some value as code documentation, and can probably become inlines in the end, but I've been holding off doing API cleanups because there's much bigger code restructuring and cleanups needed around this code...
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
kernel test robot
build bot[xfs] 65cf4eb83e: xfstests.xfs.011.fail
In reply to Dave ChinnerFYI, we noticed the following commit (built with gcc-11):
Greeting,
FYI, we noticed the following commit (built with gcc-11):
commit: 65cf4eb83e2179b565c7943fd685ddb93d2b146a ("[PATCH 8/8] xfs: grant heads track byte counts, not LSNs")
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642
base: https://git.kernel.org/cgit/fs/xfs/xfs-linux.git for-next
patch link: https://lore.kernel.org/linux-xfs/20220708015558.1134330-9-david(a)fromorbit.com
in testcase: xfstests
version: xfstests-x86_64-c1144bf-1_20220704
with following parameters:
disk: 4HDD fs: xfs test: xfs-group-01 ucode: 0x21
test-description: xfstests is a regression test suite for xfs and other files ystems.
test-url: git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
on test machine: 4 threads 1 sockets Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz with 8G memory
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
If you fix the issue, kindly add following tag
xfs/011 - output mismatch (see /lkp/benchmarks/xfstests/results//xfs/011.out.bad)
--- tests/xfs/011.out 2022-07-04 16:34:35.000000000 +0000
+++ /lkp/benchmarks/xfstests/results//xfs/011.out.bad 2022-07-11 12:33:58.535910570 +0000
@@ -1,2 +1,14 @@
QA output created by 011
Silence is golden.
+reserve_grant_head (4096:) does not match log_head_lsn (1:8192), possible leak detected.
+write_grant_head (4096:) does not match log_head_lsn (1:8192), possible leak detected.
+reserve_grant_head (4096:) does not match log_head_lsn (1:446464), possible leak detected.
+write_grant_head (4096:) does not match log_head_lsn (1:446464), possible leak detected.
+reserve_grant_head (4096:) does not match log_head_lsn (1:991232), possible leak detected.
...
(Run 'diff -u /lkp/benchmarks/xfstests/tests/xfs/011.out /lkp/benchmarks/xfstests/results//xfs/011.out.bad' to see the entire diff)To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
sudo bin/lkp install job.yaml # job file is attached in this email
bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run sudo bin/lkp run generated-yaml-file
# if come across any failure that blocks the test, # please remove ~/.lkp and /lkp dir to run from a clean state.
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.19.0-rc5 Kernel Configuration #CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-3) 11.3.0" CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=110300 CONFIG_CLANG_VERSION=0CONFIG_AS_IS_GNU=yCONFIG_AS_VERSION=23800CONFIG_LD_IS_BFD=yCONFIG_LD_VERSION=23800CONFIG_LLD_VERSION=0CONFIG_CC_CAN_LINK=y CONFIG_CC_CAN_LINK_STATIC=y CONFIG_CC_HAS_ASM_GOTO=y CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123CONFIG_CONSTRUCTORS=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_HAVE_KERNEL_ZSTD=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not setCONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_SYSVIPC_COMPAT=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_WATCH_QUEUE=yCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not setCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_GENERIC_IRQ_INJECTION=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_GENERIC_MSI_IRQ=yCONFIG_GENERIC_MSI_IRQ_DOMAIN=yCONFIG_IRQ_MSI_IOMMU=yCONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=yCONFIG_GENERIC_IRQ_RESERVATION_MODE=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_INIT=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=yCONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ_FULL=yCONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_BPF=yCONFIG_HAVE_EBPF_JIT=yCONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#CONFIG_BPF_SYSCALL=yCONFIG_BPF_JIT=yCONFIG_BPF_JIT_ALWAYS_ON=yCONFIG_BPF_JIT_DEFAULT_ON=yCONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#CONFIG_VIRT_CPU_ACCOUNTING=yCONFIG_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_SCHED_AVG_IRQ=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=yCONFIG_RCU_EXPERT=yCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_FORCE_TASKS_RCU=yCONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not setCONFIG_TASKS_RUDE_RCU=yCONFIG_FORCE_TASKS_TRACE_RCU=yCONFIG_TASKS_TRACE_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=yCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16CONFIG_RCU_NOCB_CPU=y
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_CC_HAS_INT128=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_KMEM=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=yCONFIG_CGROUP_PIDS=yCONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_HUGETLB=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_TIME_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LD_ORPHAN_WARN=yCONFIG_SYSCTL=yCONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not setCONFIG_UID16=yCONFIG_MULTIUSER=yCONFIG_SGETMASK_SYSCALL=yCONFIG_SYSFS_SYSCALL=yCONFIG_FHANDLE=yCONFIG_POSIX_TIMERS=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_FUTEX_PI=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_KCMP=yCONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_GUEST_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28CONFIG_ARCH_MMAP_RND_BITS_MAX=32CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16CONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_NR_GPIO=1024CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_AUDIT_ARCH=yCONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000CONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_PGTABLE_LEVELS=5CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#CONFIG_SMP=yCONFIG_X86_FEATURE_NAMES=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not setCONFIG_RETPOLINE=yCONFIG_CC_HAS_SLS=y
# CONFIG_SLS is not set
# CONFIG_X86_CPU_RESCTRL is not setCONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not setCONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not setCONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not setCONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_PARAVIRT_SPINLOCKS=yCONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not setCONFIG_KVM_GUEST=yCONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not setCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_INTEL_TDX_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_IA32_FEAT_CTL=yCONFIG_X86_VMX_FEATURE_NAMES=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_HYGON=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_ZHAOXIN=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not setCONFIG_BOOT_VESA_SUPPORT=yCONFIG_MAXSMP=yCONFIG_NR_CPUS_RANGE_BEGIN=8192CONFIG_NR_CPUS_RANGE_END=8192CONFIG_NR_CPUS_DEFAULT=8192CONFIG_NR_CPUS=8192CONFIG_SCHED_CLUSTER=yCONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_SCHED_MC_PRIO=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCELOG_LEGACY=yCONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not setCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#CONFIG_PERF_EVENTS_INTEL_UNCORE=mCONFIG_PERF_EVENTS_INTEL_RAPL=mCONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring
CONFIG_X86_16BIT=yCONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_LATE_LOADING=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_5LEVEL=yCONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set CONFIG_X86_64_ACPI_NUMA=yCONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=m CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=yCONFIG_X86_UMIP=yCONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not setCONFIG_EFI=yCONFIG_EFI_STUB=yCONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=yCONFIG_RANDOMIZE_BASE=yCONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_DYNAMIC_MEMORY_LAYOUT=y CONFIG_RANDOMIZE_MEMORY=y CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set CONFIG_HAVE_LIVEPATCH=yCONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=yCONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_HIBERNATION_SNAPSHOT_DEV=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not setCONFIG_ARCH_SUPPORTS_ACPI=yCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not setCONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not setCONFIG_ACPI_LPIT=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_REV_OVERRIDE_POSSIBLE=yCONFIG_ACPI_EC_DEBUGFS=mCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_TAD=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_CPU_FREQ_PSS=yCONFIG_ACPI_PROCESSOR_CSTATE=yCONFIG_ACPI_PROCESSOR_IDLE=yCONFIG_ACPI_CPPC_LIB=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_PLATFORM_PROFILE=mCONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_HOTPLUG_IOAPIC=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not setCONFIG_ACPI_BGRT=yCONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not setCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not setCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=yCONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not setCONFIG_ACPI_WATCHDOG=yCONFIG_ACPI_EXTLOG=mCONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not setCONFIG_ACPI_PCC=yCONFIG_PMIC_OPREGION=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_PRMT=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not setCONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ_CPB=yCONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m # end of CPU Frequency scaling
#
# CPU Idle
#CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not setCONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not setCONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#CONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_MMCONF_FAM10H=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_PFNCACHE=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_IRQFD=yCONFIG_HAVE_KVM_IRQ_ROUTING=yCONFIG_HAVE_KVM_DIRTY_RING=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_MMIO=yCONFIG_KVM_ASYNC_PF=yCONFIG_HAVE_KVM_MSI=yCONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=yCONFIG_KVM_VFIO=yCONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=yCONFIG_KVM_COMPAT=yCONFIG_HAVE_KVM_IRQ_BYPASS=yCONFIG_HAVE_KVM_NO_POLL=yCONFIG_KVM_XFER_TO_GUEST_WORK=yCONFIG_HAVE_KVM_PM_NOTIFIER=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not setCONFIG_AS_AVX512=yCONFIG_AS_SHA1_NI=yCONFIG_AS_SHA256_NI=yCONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_HOTPLUG_SMT=yCONFIG_GENERIC_ENTRY=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_KRETPROBE_ON_RETHOOK=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_ARCH_WANTS_NO_INSTR=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=yCONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_ARCH_STACKLEAK=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOVE_PUD=y CONFIG_HAVE_MOVE_PMD=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_HAVE_ARCH_HUGE_VMALLOC=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=28 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_HAVE_OBJTOOL=y CONFIG_HAVE_JUMP_LABEL_HACK=y CONFIG_HAVE_NOINSTR_HACK=y CONFIG_HAVE_NOINSTR_VALIDATION=y CONFIG_HAVE_UACCESS_VALIDATION=y CONFIG_HAVE_STACK_VALIDATION=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_HAVE_STATIC_CALL=y CONFIG_HAVE_STATIC_CALL_INLINE=y CONFIG_HAVE_PREEMPT_DYNAMIC=y CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y CONFIG_ARCH_HAS_ELFCORE_COMPAT=y CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y CONFIG_DYNAMIC_SIGFRAME=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=yCONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULE_SIG_FORMAT=yCONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set # CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe" CONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_DEV_BSG_COMMON=yCONFIG_BLK_ICQ=yCONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set CONFIG_BLK_WBT=yCONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set CONFIG_BLK_DEBUG_FS=yCONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_PCI=yCONFIG_BLK_MQ_VIRTIO=yCONFIG_BLK_MQ_RDMA=yCONFIG_BLK_PM=yCONFIG_BLOCK_HOLDER_DEPRECATED=yCONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=yCONFIG_IOSCHED_BFQ=yCONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=yCONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=yCONFIG_ARCH_HAS_SYSCALL_WRAPPER=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_ZPOOL=yCONFIG_SWAP=yCONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not setCONFIG_ZSMALLOC=yCONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not setCONFIG_SLUB=yCONFIG_SLAB_MERGE_DEFAULT=yCONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not setCONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not setCONFIG_SPARSEMEM=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_FAST_GUP=yCONFIG_NUMA_KEEP_MEMINFO=yCONFIG_MEMORY_ISOLATION=yCONFIG_EXCLUSIVE_SYSTEM_RAM=yCONFIG_HAVE_BOOTMEM_INFO_NODE=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not setCONFIG_MEMORY_HOTREMOVE=yCONFIG_MHP_MEMMAP_ON_MEMORY=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=yCONFIG_MEMORY_BALLOON=yCONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=yCONFIG_DEVICE_MIGRATION=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_ARCH_ENABLE_THP_MIGRATION=yCONFIG_CONTIG_ALLOC=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=mCONFIG_ARCH_WANT_GENERAL_HUGETLB=yCONFIG_ARCH_WANTS_THP_SWAP=yCONFIG_TRANSPARENT_HUGEPAGE=yCONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not setCONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not setCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_USE_PERCPU_NUMA_NODE_ID=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_FRONTSWAP=yCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not setCONFIG_CMA_AREAS=19
# CONFIG_MEM_SOFT_DIRTY is not setCONFIG_GENERIC_EARLY_IOREMAP=yCONFIG_DEFERRED_STRUCT_PAGE_INIT=yCONFIG_PAGE_IDLE_FLAG=yCONFIG_IDLE_PAGE_TRACKING=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_CURRENT_STACK_POINTER=yCONFIG_ARCH_HAS_VM_GET_PAGE_PROT=yCONFIG_ARCH_HAS_PTE_DEVMAP=yCONFIG_ZONE_DMA=yCONFIG_ZONE_DMA32=yCONFIG_ZONE_DEVICE=yCONFIG_HMM_MIRROR=yCONFIG_DEVICE_PRIVATE=yCONFIG_VMAP_PFN=yCONFIG_ARCH_USES_HIGH_VMA_FLAGS=yCONFIG_ARCH_HAS_PKEYS=yCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not setCONFIG_ARCH_HAS_PTE_SPECIAL=yCONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not setCONFIG_USERFAULTFD=yCONFIG_HAVE_ARCH_USERFAULTFD_WP=yCONFIG_HAVE_ARCH_USERFAULTFD_MINOR=yCONFIG_PTE_MARKER=yCONFIG_PTE_MARKER_UFFD_WP=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring # end of Memory Management options
CONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=yCONFIG_NET_INGRESS=yCONFIG_NET_EGRESS=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_AF_UNIX_OOB=yCONFIG_UNIX_DIAG=mCONFIG_TLS=mCONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not setCONFIG_XFRM=yCONFIG_XFRM_OFFLOAD=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not setCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_AH=mCONFIG_XFRM_ESP=mCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not setCONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE_COMMON=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not setCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not setCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=mCONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_NV=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not setCONFIG_TCP_CONG_BBR=mCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not setCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not setCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_IPV6_VTI=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_GRE=mCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not setCONFIG_NETLABEL=y
# CONFIG_MPTCP is not setCONFIG_NETWORK_SECMARK=yCONFIG_NET_PTP_CLASSIFY=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=yCONFIG_NETFILTER_EGRESS=yCONFIG_NETFILTER_SKIP_EGRESS=yCONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_FAMILY_BRIDGE=yCONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not setCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_NETLINK_OSF=mCONFIG_NF_CONNTRACK=mCONFIG_NF_LOG_SYSLOG=mCONFIG_NETFILTER_CONNCOUNT=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=yCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CONNTRACK_LABELS=yCONFIG_NF_CT_PROTO_DCCP=yCONFIG_NF_CT_PROTO_GRE=yCONFIG_NF_CT_PROTO_SCTP=yCONFIG_NF_CT_PROTO_UDPLITE=yCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NF_CT_NETLINK_TIMEOUT=mCONFIG_NF_CT_NETLINK_HELPER=mCONFIG_NETFILTER_NETLINK_GLUE_CT=yCONFIG_NF_NAT=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_REDIRECT=yCONFIG_NF_NAT_MASQUERADE=yCONFIG_NETFILTER_SYNPROXY=mCONFIG_NF_TABLES=mCONFIG_NF_TABLES_INET=yCONFIG_NF_TABLES_NETDEV=yCONFIG_NFT_NUMGEN=mCONFIG_NFT_CT=mCONFIG_NFT_CONNLIMIT=mCONFIG_NFT_LOG=mCONFIG_NFT_LIMIT=mCONFIG_NFT_MASQ=mCONFIG_NFT_REDIR=mCONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not setCONFIG_NFT_OBJREF=mCONFIG_NFT_QUEUE=mCONFIG_NFT_QUOTA=mCONFIG_NFT_REJECT=mCONFIG_NFT_REJECT_INET=mCONFIG_NFT_COMPAT=mCONFIG_NFT_HASH=mCONFIG_NFT_FIB=mCONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not setCONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not setCONFIG_NF_DUP_NETDEV=mCONFIG_NFT_DUP_NETDEV=mCONFIG_NFT_FWD_NETDEV=mCONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not setCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_NAT=mCONFIG_NETFILTER_XT_TARGET_NETMAP=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_REDIRECT=mCONFIG_NETFILTER_XT_TARGET_MASQUERADE=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_BPF=mCONFIG_NETFILTER_XT_MATCH_CGROUP=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLABEL=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not setCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not setCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not setCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPMARK=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_IPMAC=mCONFIG_IP_SET_HASH_MAC=mCONFIG_IP_SET_HASH_NETPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETNET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=mCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_FO=mCONFIG_IP_VS_OVF=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not setCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_SOCKET_IPV4=mCONFIG_NF_TPROXY_IPV4=mCONFIG_NF_TABLES_IPV4=yCONFIG_NFT_REJECT_IPV4=mCONFIG_NFT_DUP_IPV4=mCONFIG_NFT_FIB_IPV4=mCONFIG_NF_TABLES_ARP=yCONFIG_NF_DUP_IPV4=mCONFIG_NF_LOG_ARP=mCONFIG_NF_LOG_IPV4=mCONFIG_NF_REJECT_IPV4=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_SYNPROXY=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not setCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#CONFIG_NF_SOCKET_IPV6=mCONFIG_NF_TPROXY_IPV6=mCONFIG_NF_TABLES_IPV6=yCONFIG_NFT_REJECT_IPV6=mCONFIG_NFT_DUP_IPV6=mCONFIG_NFT_FIB_IPV6=mCONFIG_NF_DUP_IPV6=mCONFIG_NF_REJECT_IPV6=mCONFIG_NF_LOG_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_TARGET_SYNPROXY=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_IP6_NF_NAT=mCONFIG_IP6_NF_TARGET_MASQUERADE=mCONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not setCONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set CONFIG_TIPC_MEDIA_UDP=yCONFIG_TIPC_CRYPTO=yCONFIG_TIPC_DIAG=mCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_GARP=mCONFIG_MRP=mCONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not setCONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not setCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not setCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not setCONFIG_NET_SCH_FQ=mCONFIG_NET_SCH_HHF=mCONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not setCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not setCONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not setCONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not setCONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=yCONFIG_NET_CLS_BPF=mCONFIG_NET_CLS_FLOWER=mCONFIG_NET_CLS_MATCHALL=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not setCONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not setCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not setCONFIG_NET_ACT_VLAN=mCONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not setCONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not setCONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not setCONFIG_OPENVSWITCH=mCONFIG_OPENVSWITCH_GRE=mCONFIG_VSOCKETS=mCONFIG_VSOCKETS_DIAG=mCONFIG_VSOCKETS_LOOPBACK=mCONFIG_VMWARE_VMCI_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS_COMMON=mCONFIG_NETLINK_DIAG=mCONFIG_MPLS=yCONFIG_NET_MPLS_GSO=yCONFIG_MPLS_ROUTING=mCONFIG_MPLS_IPTUNNEL=mCONFIG_NET_NSH=y
# CONFIG_HSR is not setCONFIG_NET_SWITCHDEV=yCONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not setCONFIG_PCPU_DEV_REFCNT=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_SOCK_RX_QUEUE_MAPPING=yCONFIG_XPS=yCONFIG_CGROUP_NET_PRIO=yCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_BPF_STREAM_PARSER=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_DROP_MONITOR=y
# end of Network testing # end of Networking options
# CONFIG_HAMRADIO is not setCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not setCONFIG_CAN_SLCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not setCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_C_CAN_PCI=mCONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not setCONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not setCONFIG_CAN_SJA1000=mCONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not setCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PEAK_PCI=mCONFIG_CAN_PEAK_PCIEC=yCONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not setCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not setCONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not setCONFIG_CFG80211_REQUIRE_SIGNED_REGDB=yCONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=yCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not setCONFIG_CFG80211_CRDA_SUPPORT=yCONFIG_CFG80211_WEXT=yCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0CONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not setCONFIG_NET_9P=yCONFIG_NET_9P_FD=yCONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not setCONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not setCONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not setCONFIG_LWTUNNEL=yCONFIG_LWTUNNEL_BPF=yCONFIG_DST_CACHE=yCONFIG_GRO_CELLS=yCONFIG_SOCK_VALIDATE_XMIT=yCONFIG_NET_SELFTESTS=yCONFIG_NET_SOCK_MSG=yCONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not setCONFIG_FAILOVER=mCONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#CONFIG_HAVE_EISA=y
# CONFIG_EISA is not setCONFIG_HAVE_PCI=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIE_ECRC=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not setCONFIG_PCI_MSI=yCONFIG_PCI_MSI_IRQ_DOMAIN=yCONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=yCONFIG_PCI_PF_STUB=mCONFIG_PCI_ATS=yCONFIG_PCI_LOCKLESS_CONFIG=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not setCONFIG_PCI_LABEL=yCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=64CONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not setCONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#CONFIG_VMD=y
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support # end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not setCONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_FW_LOADER_COMPRESS is not set CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not setCONFIG_GENERIC_CPU_AUTOPROBE=yCONFIG_GENERIC_CPU_VULNERABILITIES=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=mCONFIG_REGMAP_SPI=mCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol #
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not setCONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not setCONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#CONFIG_EFI_VARS=yCONFIG_EFI_ESRT=yCONFIG_EFI_VARS_PSTORE=yCONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=yCONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not setCONFIG_EFI_DXE_MEM_ATTRIBUTES=yCONFIG_EFI_RUNTIME_WRAPPERS=yCONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not setCONFIG_EFI_EARLYCON=yCONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=yCONFIG_UEFI_CPER_X86=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=yCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=mCONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
# CONFIG_BLK_DEV_FD is not setCONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not setCONFIG_ZRAM=mCONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZO is not setCONFIG_ZRAM_DEF_COMP="lzo-rle"CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=mCONFIG_BLK_DEV_RBD=m
#
# NVME Support
#CONFIG_NVME_CORE=mCONFIG_BLK_DEV_NVME=mCONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not setCONFIG_NVME_FABRICS=m
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not setCONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not setCONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_RDMA is not setCONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_SGI_XP=mCONFIG_HP_ILO=mCONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not setCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not setCONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=mCONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=mCONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_GSC is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not setCONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not setCONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not setCONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI_COMMON=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_BLK_DEV_SR=mCONFIG_CHR_DEV_SG=mCONFIG_BLK_DEV_BSG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_MPT3SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not setCONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not setCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=mCONFIG_SATA_HOST=yCONFIG_PATA_TIMINGS=yCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_FORCE=yCONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not setCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=mCONFIG_SATA_MOBILE_LPM_POLICY=0CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not setCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=mCONFIG_DM_CACHE_SMQ=m CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not setCONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=mCONFIG_DM_RAID=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=mCONFIG_DM_LOG_WRITES=m CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set CONFIG_DM_AUDIT=yCONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_TCM_USER2=m CONFIG_LOOPBACK_TARGET=m CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not setCONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not setCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not setCONFIG_VETH=mCONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not setCONFIG_ETHERNET=yCONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not setCONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not setCONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not setCONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not setCONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not setCONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not setCONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not setCONFIG_NET_VENDOR_ARC=yCONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not setCONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not setCONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not setCONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not setCONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not setCONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not setCONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not setCONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not setCONFIG_NET_VENDOR_CORTINA=yCONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not setCONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not setCONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not setCONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not setCONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not setCONFIG_NET_VENDOR_EZCHIP=yCONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not setCONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not setCONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not setCONFIG_NET_VENDOR_I825XX=yCONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not setCONFIG_E1000=yCONFIG_E1000E=yCONFIG_E1000E_HWTS=yCONFIG_IGB=yCONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not setCONFIG_IXGBE=yCONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not setCONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not setCONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not setCONFIG_IGC=y
# CONFIG_JME is not setCONFIG_NET_VENDOR_LITEX=yCONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_PRESTERA is not setCONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not setCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not setCONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not setCONFIG_NET_VENDOR_MICROSEMI=yCONFIG_NET_VENDOR_MICROSOFT=yCONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not setCONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not setCONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not setCONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not setCONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not setCONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not setCONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not setCONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not setCONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not setCONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not setCONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not setCONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not setCONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not setCONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not setCONFIG_R8169=yCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not setCONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not setCONFIG_NET_VENDOR_SEEQ=yCONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not setCONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not setCONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not setCONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not setCONFIG_NET_VENDOR_SOCIONEXT=yCONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not setCONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not setCONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not setCONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not setCONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not setCONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not setCONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not setCONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not setCONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=yCONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not setCONFIG_FIXED_PHY=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not setCONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not setCONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not setCONFIG_MDIO_DEVICE=yCONFIG_MDIO_BUS=yCONFIG_FWNODE_MDIO=yCONFIG_ACPI_MDIO=yCONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not setCONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not setCONFIG_WLAN=yCONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not setCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not setCONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not setCONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not setCONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWLMEI is not setCONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not setCONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not setCONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not setCONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not setCONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not setCONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not setCONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not setCONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not setCONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not setCONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not setCONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not setCONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not setCONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not setCONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not setCONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_BYD=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=yCONFIG_MOUSE_PS2_CYPRESS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_ELANTECH_SMBUS=yCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_PS2_FOCALTECH=yCONFIG_MOUSE_PS2_VMMOUSE=yCONFIG_MOUSE_PS2_SMBUS=yCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not setCONFIG_MOUSE_CYAPA=mCONFIG_MOUSE_ELAN_I2C=mCONFIG_MOUSE_ELAN_I2C_I2C=yCONFIG_MOUSE_ELAN_I2C_SMBUS=yCONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not setCONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not setCONFIG_RMI4_CORE=mCONFIG_RMI4_I2C=mCONFIG_RMI4_SPI=mCONFIG_RMI4_SMB=mCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=mCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=yCONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not setCONFIG_RMI4_F55=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not setCONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_NR_UARTS=64 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_LPSS=y CONFIG_SERIAL_8250_MID=y CONFIG_SERIAL_8250_PERICOM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not setCONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not setCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_N_GSM=mCONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not setCONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=mCONFIG_IPMI_DMI_DECODE=yCONFIG_IPMI_PLAT_DATA=yCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_SSIF=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not setCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not setCONFIG_DEVMEM=yCONFIG_NVRAM=yCONFIG_DEVPORT=yCONFIG_HPET=yCONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not setCONFIG_HANGCHECK_TIMER=mCONFIG_UV_MMTIMER=mCONFIG_TCG_TPM=yCONFIG_HW_RANDOM_TPM=yCONFIG_TCG_TIS_CORE=yCONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not setCONFIG_TCG_TIS_I2C_ATMEL=mCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_TIS_I2C_NUVOTON=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not setCONFIG_TCG_TIS_ST33ZP24=mCONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not setCONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not setCONFIG_RANDOM_TRUST_CPU=yCONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#CONFIG_I2C=yCONFIG_ACPI_I2C_OPREGION=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not setCONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=mCONFIG_I2C_ISMT=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not setCONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not setCONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not setCONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=yCONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not setCONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support
CONFIG_PINCTRL=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_CDEV=yCONFIG_GPIO_CDEV_V1=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not setCONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
# CONFIG_W1 is not setCONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not setCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not setCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not setCONFIG_SENSORS_ADT7410=mCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not setCONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not setCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_APPLESMC=mCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not setCONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not setCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not setCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not setCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_I5500=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not setCONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not setCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not setCONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not setCONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not setCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=mCONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not setCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not setCONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not setCONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not setCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LM95234=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not setCONFIG_SENSORS_NCT6775_CORE=mCONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not setCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not setCONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not setCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not setCONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not setCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not setCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not setCONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not setCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not setCONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not setCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not setCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not setCONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not setCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA209=mCONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not setCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not setCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not setCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not setCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_WMI_EC is not set
# CONFIG_SENSORS_ASUS_EC is not set CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#CONFIG_INTEL_POWERCLAMP=mCONFIG_X86_THERMAL_VECTOR=yCONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=yCONFIG_WATCHDOG_OPEN_TIMEOUT=0CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not setCONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not setCONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not setCONFIG_IB700_WDT=mCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not setCONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not setCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not setCONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=mCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not setCONFIG_LPC_ICH=yCONFIG_LPC_SCH=mCONFIG_MFD_INTEL_LPSS=yCONFIG_MFD_INTEL_LPSS_ACPI=yCONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SIMPLE_MFD_I2C is not setCONFIG_MFD_SM501=mCONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not setCONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not setCONFIG_RC_CORE=mCONFIG_LIRC=yCONFIG_RC_MAP=mCONFIG_RC_DECODERS=yCONFIG_IR_IMON_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_MCE_KBD_DECODER=mCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not setCONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not setCONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not setCONFIG_RC_DEVICES=yCONFIG_IR_ENE=mCONFIG_IR_FINTEK=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not setCONFIG_IR_ITE_CIR=m
# CONFIG_IR_MCEUSB is not setCONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not setCONFIG_IR_SERIAL=mCONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_TOY is not set
# CONFIG_IR_TTUSBIR is not setCONFIG_IR_WINBOND_CIR=m
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_RC_XBOX_DVD is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=mCONFIG_MEDIA_SUPPORT_FILTER=yCONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers' #
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# end of Media drivers
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
#
# Media ancillary drivers
#
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_AGP is not setCONFIG_INTEL_GTT=mCONFIG_VGA_SWITCHEROO=yCONFIG_DRM=mCONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_SELFTEST is not setCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100CONFIG_DRM_LOAD_EDID_FIRMWARE=yCONFIG_DRM_DISPLAY_HELPER=mCONFIG_DRM_DISPLAY_DP_HELPER=yCONFIG_DRM_DISPLAY_HDCP_HELPER=yCONFIG_DRM_DISPLAY_HDMI_HELPER=yCONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not setCONFIG_DRM_TTM=mCONFIG_DRM_BUDDY=mCONFIG_DRM_VRAM_HELPER=mCONFIG_DRM_TTM_HELPER=mCONFIG_DRM_GEM_SHMEM_HELPER=m
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=mCONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not setCONFIG_DRM_I915=mCONFIG_DRM_I915_FORCE_PROBE=""CONFIG_DRM_I915_CAPTURE_ERROR=yCONFIG_DRM_I915_COMPRESS_ERROR=yCONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT_KVMGT is not setCONFIG_DRM_I915_REQUEST_TIMEOUT=20000CONFIG_DRM_I915_FENCE_TIMEOUT=10000CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500CONFIG_DRM_I915_PREEMPT_TIMEOUT=640CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000CONFIG_DRM_I915_STOP_TIMEOUT=100CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not setCONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not setCONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not setCONFIG_DRM_QXL=mCONFIG_DRM_VIRTIO_GPU=mCONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set # CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=yCONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not setCONFIG_DRM_BOCHS=mCONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not setCONFIG_DRM_PANEL_ORIENTATION_QUIRKS=yCONFIG_DRM_NOMODESET=yCONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#CONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=yCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not setCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not setCONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not setCONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=yCONFIG_UHID=mCONFIG_HID_GENERIC=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not setCONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not setCONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not setCONFIG_HID_ASUS=mCONFIG_HID_AUREAL=mCONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not setCONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not setCONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not setCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not setCONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not setCONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not setCONFIG_HID_GEMBIRD=mCONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not setCONFIG_HID_KEYTOUCH=mCONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not setCONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not setCONFIG_HID_GYRATION=mCONFIG_HID_ICADE=mCONFIG_HID_ITE=mCONFIG_HID_JABRA=mCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=mCONFIG_HID_LCPOWER=mCONFIG_HID_LED=mCONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not setCONFIG_HID_LOGITECH=mCONFIG_HID_LOGITECH_DJ=mCONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not setCONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not setCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not setCONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not setCONFIG_HID_ORTEK=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not setCONFIG_HID_PETALYNX=mCONFIG_HID_PICOLCD=mCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=yCONFIG_HID_PICOLCD_LCD=yCONFIG_HID_PICOLCD_LEDS=yCONFIG_HID_PICOLCD_CIR=yCONFIG_HID_PLANTRONICS=m
# CONFIG_HID_RAZER is not setCONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not setCONFIG_HID_SAITEK=mCONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SONY is not setCONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not setCONFIG_HID_STEELSERIES=mCONFIG_HID_SUNPLUS=mCONFIG_HID_RMI=mCONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not setCONFIG_HID_TIVO=mCONFIG_HID_TOPSEED=mCONFIG_HID_THINGM=mCONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not setCONFIG_HID_WIIMOTE=mCONFIG_HID_XINMO=mCONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not setCONFIG_HID_ZYDACRON=mCONFIG_HID_SENSOR_HUB=yCONFIG_HID_SENSOR_CUSTOM_SENSOR=mCONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
#
# Intel ISH HID support
#CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support # end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not setCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_PCI=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not setCONFIG_USB_LEDS_TRIGGER_USBPORT=yCONFIG_USB_AUTOSUSPEND_DELAY=2CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not setCONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not setCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not setCONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not setCONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not setCONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_STUSB160X is not set
# CONFIG_TYPEC_WUSB3801 is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support #
# CONFIG_TYPEC_MUX_FSA4480 is not set
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not setCONFIG_MMC=mCONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_MINORS=8CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_IO_ACCESSORS=yCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_ACPI=mCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not setCONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not setCONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not setCONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not setCONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_INTEL_SS4200=mCONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #CONFIG_LEDS_BLINKM=mCONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not setCONFIG_LEDS_TRIGGER_GPIO=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_LEDS_TRIGGER_PATTERN is not set CONFIG_LEDS_TRIGGER_AUDIO=m # CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not setCONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=mCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ON_DEMAND_PAGING=yCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=yCONFIG_INFINIBAND_VIRT_DMA=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_RDMAVT is not setCONFIG_RDMA_RXE=mCONFIG_RDMA_SIW=mCONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not setCONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not setCONFIG_INFINIBAND_SRP=mCONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not setCONFIG_EDAC_ATOMIC_SCRUB=yCONFIG_EDAC_SUPPORT=yCONFIG_EDAC=yCONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_GHES=yCONFIG_EDAC_E752X=mCONFIG_EDAC_I82975X=mCONFIG_EDAC_I3000=mCONFIG_EDAC_I3200=mCONFIG_EDAC_IE31200=mCONFIG_EDAC_X38=mCONFIG_EDAC_I5400=mCONFIG_EDAC_I7CORE=mCONFIG_EDAC_I5000=mCONFIG_EDAC_I5100=mCONFIG_EDAC_I7300=mCONFIG_EDAC_SBRIDGE=mCONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not setCONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not setCONFIG_RTC_LIB=yCONFIG_RTC_MC146818_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not setCONFIG_RTC_NVMEM=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not setCONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not setCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_ISL12022=mCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not setCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not setCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=mCONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not setCONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#CONFIG_RTC_DRV_DS3232=mCONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not setCONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not setCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_DS2404=mCONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=mCONFIG_RTC_DRV_RP5C01=mCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not setCONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#CONFIG_DMA_ENGINE=yCONFIG_DMA_VIRTUAL_CHANNELS=yCONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not setCONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not setCONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not setCONFIG_DW_DMAC_CORE=yCONFIG_DW_DMAC=mCONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not setCONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#CONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=mCONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not setCONFIG_UIO=mCONFIG_UIO_CIF=mCONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not setCONFIG_UIO_AEC=mCONFIG_UIO_SERCOS3=mCONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not setCONFIG_VFIO=mCONFIG_VFIO_IOMMU_TYPE1=mCONFIG_VFIO_VIRQFD=mCONFIG_VFIO_NOIOMMU=yCONFIG_VFIO_PCI_CORE=mCONFIG_VFIO_PCI_MMAP=yCONFIG_VFIO_PCI_INTX=yCONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not setCONFIG_VFIO_MDEV=mCONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_PCI_LIB=yCONFIG_VIRTIO_PCI_LIB_LEGACY=yCONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_HARDEN_NOTIFICATION is not setCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not setCONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MEM is not setCONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not setCONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not setCONFIG_VHOST_IOTLB=mCONFIG_VHOST=mCONFIG_VHOST_MENU=yCONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not setCONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACPI_WMI=mCONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not setCONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not setCONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not setCONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_ADV_SWBUTTON is not setCONFIG_APPLE_GMUX=mCONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not setCONFIG_ASUS_WMI=mCONFIG_ASUS_NB_WMI=m
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not setCONFIG_EEEPC_LAPTOP=mCONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not setCONFIG_AMILO_RFKILL=mCONFIG_FUJITSU_LAPTOP=mCONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not setCONFIG_HP_ACCEL=m
# CONFIG_WIRELESS_HOTKEY is not setCONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not setCONFIG_IDEAPAD_LAPTOP=mCONFIG_SENSORS_HDAPS=mCONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not setCONFIG_THINKPAD_ACPI_VIDEO=yCONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_IFS is not set
# CONFIG_INTEL_SAR_INT1092 is not setCONFIG_INTEL_PMC_CORE=m
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not setCONFIG_INTEL_WMI_THUNDERBOLT=m
#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control
CONFIG_INTEL_HID_EVENT=mCONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not setCONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not setCONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not setCONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_VSEC is not setCONFIG_MSI_LAPTOP=mCONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not setCONFIG_SAMSUNG_LAPTOP=mCONFIG_SAMSUNG_Q10=mCONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not setCONFIG_ACPI_CMPC=mCONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not setCONFIG_PANASONIC_LAPTOP=mCONFIG_SONY_LAPTOP=mCONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not setCONFIG_TOPSTAR_LAPTOP=m
# CONFIG_SERIAL_MULTI_INSTANTIATE is not setCONFIG_MLX_PLATFORM=mCONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not setCONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not setCONFIG_MELLANOX_PLATFORM=yCONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not setCONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not setCONFIG_HAVE_CLK=yCONFIG_HAVE_CLK_PREPARE=yCONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not setCONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#CONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=yCONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not setCONFIG_IOMMU_IOVA=yCONFIG_IOASID=yCONFIG_IOMMU_API=yCONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not setCONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not setCONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not setCONFIG_DMAR_TABLE=yCONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not setCONFIG_INTEL_IOMMU_FLOPPY_WA=yCONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=yCONFIG_IRQ_REMAP=y
# CONFIG_VIRTIO_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not setCONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not setCONFIG_PWM=yCONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_DWC is not setCONFIG_PWM_LPSS=mCONFIG_PWM_LPSS_PCI=mCONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
CONFIG_POWERCAP=yCONFIG_INTEL_RAPL_CORE=mCONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=mCONFIG_BLK_DEV_PMEM=mCONFIG_ND_CLAIM=yCONFIG_ND_BTT=mCONFIG_BTT=yCONFIG_ND_PFN=mCONFIG_NVDIMM_PFN=yCONFIG_NVDIMM_DAX=yCONFIG_NVDIMM_KEYS=yCONFIG_DAX=yCONFIG_DEV_DAX=mCONFIG_DEV_DAX_PMEM=mCONFIG_DEV_DAX_KMEM=mCONFIG_NVMEM=yCONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not setCONFIG_STM_DUMMY=mCONFIG_STM_SOURCE_CONSOLE=mCONFIG_STM_SOURCE_HEARTBEAT=mCONFIG_STM_SOURCE_FTRACE=mCONFIG_INTEL_TH=mCONFIG_INTEL_TH_PCI=mCONFIG_INTEL_TH_ACPI=mCONFIG_INTEL_TH_GTH=mCONFIG_INTEL_TH_STH=mCONFIG_INTEL_TH_MSU=mCONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=yCONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not setCONFIG_EXT4_FS=yCONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_XFS_FS=mCONFIG_XFS_SUPPORT_V4=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_ONLINE_SCRUB=y CONFIG_XFS_ONLINE_REPAIR=yCONFIG_XFS_DEBUG=yCONFIG_XFS_ASSERT_FATAL=yCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=mCONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set CONFIG_F2FS_FS=mCONFIG_F2FS_STAT_FS=yCONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
# CONFIG_ZONEFS_FS is not setCONFIG_FS_DAX=yCONFIG_FS_DAX_PMD=yCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=yCONFIG_FS_ENCRYPTION=y CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=yCONFIG_AUTOFS_FS=yCONFIG_FUSE_FS=mCONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set # CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#CONFIG_NETFS_SUPPORT=yCONFIG_NETFS_STATS=yCONFIG_FSCACHE=mCONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not setCONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=y CONFIG_PROC_VMCORE_DEVICE_DUMP=y CONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_PROC_CHILDREN=y CONFIG_PROC_PID_ARCH_STATUS=yCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set CONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=y CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set CONFIG_MEMFD_CREATE=y CONFIG_ARCH_HAS_GIGANTIC_PAGE=y CONFIG_CONFIGFS_FS=yCONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=mCONFIG_CRAMFS_BLOCKDEV=yCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set CONFIG_SQUASHFS_LZO=yCONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not setCONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_PSTORE=y CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240 CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set CONFIG_PSTORE_COMPRESS=y CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not setCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=yCONFIG_NFS_V4_2=yCONFIG_PNFS_FILE_LAYOUT=mCONFIG_PNFS_BLOCK=m CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_V4_SECURITY_LABEL=y CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=y CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set CONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_GRACE_PERIOD=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=y CONFIG_NFS_V4_2_SSC_HELPER=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set CONFIG_SUNRPC_DEBUG=y CONFIG_SUNRPC_XPRT_RDMA=mCONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set CONFIG_CIFS=mCONFIG_CIFS_STATS2=y CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y CONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=yCONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_9P_FS=yCONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set CONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=mCONFIG_NLS_UTF8=mCONFIG_DLM=mCONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not setCONFIG_IO_WQ=y
# end of File systems
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set CONFIG_PERSISTENT_KEYRINGS=yCONFIG_TRUSTED_KEYS=yCONFIG_TRUSTED_KEYS_TPM=yCONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=yCONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_INFINIBAND is not set CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not setCONFIG_INTEL_TXT=y CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_HARDENED_USERCOPY=yCONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not setCONFIG_INTEGRITY=yCONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_EVM is not setCONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not setCONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options # end of Security options
CONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_ASYNC_PQ=mCONFIG_ASYNC_RAID6_RECOV=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_SKCIPHER=yCONFIG_CRYPTO_SKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_RNG_DEFAULT=yCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_AKCIPHER=yCONFIG_CRYPTO_KPP2=yCONFIG_CRYPTO_KPP=mCONFIG_CRYPTO_ACOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_USER=mCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_NULL2=yCONFIG_CRYPTO_PCRYPT=mCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not setCONFIG_CRYPTO_SIMD=y
#
# Public-key cryptography
#CONFIG_CRYPTO_RSA=yCONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not setCONFIG_CRYPTO_ECC=mCONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not setCONFIG_CRYPTO_SEQIV=yCONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CFB=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not setCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not setCONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#CONFIG_CRYPTO_CMAC=mCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_VMAC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=mCONFIG_CRYPTO_CRC32=mCONFIG_CRYPTO_CRC32_PCLMUL=mCONFIG_CRYPTO_XXHASH=mCONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_CRCT10DIF_PCLMUL=mCONFIG_CRYPTO_CRC64_ROCKSOFT=mCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_POLY1305=mCONFIG_CRYPTO_POLY1305_X86_64=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA1_SSSE3=yCONFIG_CRYPTO_SHA256_SSSE3=yCONFIG_CRYPTO_SHA512_SSSE3=mCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
# CONFIG_CRYPTO_STREEBOG is not setCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not setCONFIG_CRYPTO_AES_NI_INTEL=yCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_BLOWFISH_COMMON=mCONFIG_CRYPTO_BLOWFISH_X86_64=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAMELLIA_X86_64=mCONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=mCONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=mCONFIG_CRYPTO_CAST_COMMON=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST5_AVX_X86_64=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_CAST6_AVX_X86_64=mCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not setCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_CHACHA20=mCONFIG_CRYPTO_CHACHA20_X86_64=mCONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_SERPENT_SSE2_X86_64=mCONFIG_CRYPTO_SERPENT_AVX_X86_64=mCONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not setCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_X86_64=mCONFIG_CRYPTO_TWOFISH_X86_64_3WAY=mCONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=mCONFIG_CRYPTO_DRBG_MENU=yCONFIG_CRYPTO_DRBG_HMAC=yCONFIG_CRYPTO_DRBG_HASH=yCONFIG_CRYPTO_DRBG_CTR=yCONFIG_CRYPTO_DRBG=yCONFIG_CRYPTO_JITTERENTROPY=yCONFIG_CRYPTO_USER_API=yCONFIG_CRYPTO_USER_API_HASH=yCONFIG_CRYPTO_USER_API_SKCIPHER=yCONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not setCONFIG_CRYPTO_USER_API_AEAD=yCONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not setCONFIG_CRYPTO_HASH_INFO=yCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not setCONFIG_CRYPTO_DEV_CCP=yCONFIG_CRYPTO_DEV_CCP_DD=mCONFIG_CRYPTO_DEV_SP_CCP=yCONFIG_CRYPTO_DEV_CCP_CRYPTO=mCONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not setCONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=mCONFIG_CRYPTO_DEV_QAT_C3XXX=mCONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=mCONFIG_CRYPTO_DEV_QAT_C3XXXVF=mCONFIG_CRYPTO_DEV_QAT_C62XVF=mCONFIG_CRYPTO_DEV_NITROX=mCONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not setCONFIG_ASYMMETRIC_KEY_TYPE=yCONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=yCONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not setCONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not setCONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not setCONFIG_SYSTEM_TRUSTED_KEYRING=yCONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not setCONFIG_SYSTEM_BLACKLIST_KEYRING=yCONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=mCONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not setCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not setCONFIG_RATIONAL=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_ARCH_USE_CMPXCHG_LOCKREF=yCONFIG_ARCH_HAS_FAST_MULTIPLIER=yCONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#CONFIG_CRYPTO_LIB_AES=yCONFIG_CRYPTO_LIB_ARC4=mCONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=yCONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=mCONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not setCONFIG_CRYPTO_LIB_DES=mCONFIG_CRYPTO_LIB_POLY1305_RSIZE=11CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=mCONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not setCONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC64_ROCKSOFT=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not setCONFIG_CRC64=m
# CONFIG_CRC4 is not setCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_CRC8=mCONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_LZ4_DECOMPRESS=yCONFIG_ZSTD_COMPRESS=mCONFIG_ZSTD_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=yCONFIG_XZ_DEC_ARM=yCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not setCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_DECOMPRESS_XZ=yCONFIG_DECOMPRESS_LZO=yCONFIG_DECOMPRESS_LZ4=yCONFIG_DECOMPRESS_ZSTD=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_REED_SOLOMON=mCONFIG_REED_SOLOMON_ENC8=yCONFIG_REED_SOLOMON_DEC8=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_INTERVAL_TREE=yCONFIG_XARRAY_MULTI=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_DMA_OPS=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_ARCH_DMA_ADDR_T_64BIT=yCONFIG_SWIOTLB=yCONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set
#
# Default contiguous memory area size:
#CONFIG_CMA_SIZE_MBYTES=0CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not setCONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not setCONFIG_SGL_ALLOC=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_NLATTR=yCONFIG_CLZ_TAB=yCONFIG_IRQ_POLL=yCONFIG_MPILIB=yCONFIG_SIGNATURE=yCONFIG_DIMLIB=yCONFIG_OID_REGISTRY=yCONFIG_UCS2_STRING=yCONFIG_HAVE_GENERIC_VDSO=yCONFIG_GENERIC_GETTIMEOFDAY=yCONFIG_GENERIC_VDSO_TIME_NS=yCONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_SG_POOL=yCONFIG_ARCH_HAS_PMEM_API=yCONFIG_MEMREGION=yCONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=yCONFIG_ARCH_HAS_COPY_MC=yCONFIG_ARCH_STACKWALK=yCONFIG_STACKDEPOT=yCONFIG_STACKDEPOT_ALWAYS_INIT=yCONFIG_STACK_HASH_ORDER=20CONFIG_SBITMAP=y
# end of Library routines
CONFIG_ASN1_ENCODER=y
#
# Kernel hacking
#
#
# printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_PRINTK_CALLER=y # CONFIG_STACKTRACE_BUILD_ID is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DYNAMIC_DEBUG_CORE=y CONFIG_SYMBOLIC_ERRNAME=y CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options
CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set CONFIG_FRAME_WARN=8192 CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_OBJTOOL=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
693 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Re: [xfs] 65cf4eb83e: xfstests.xfs.011.fail
Quoted 37 lines · kernel test robot
Greeting,
FYI, we noticed the following commit (built with gcc-11):
commit:
65cf4eb83e2179b565c7943fd685ddb93d2b146a("[PATCH 8/8] xfs: grant heads track byte counts, not LSNs")
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-byte-base-grant-head-reservation-tracking/20220708-095642
base: https://git.kernel.org/cgit/fs/xfs/xfs-linux.git for-next
patch link: https://lore.kernel.org/linux-xfs/20220708015558.1134330-9-david(a)fromorbit.comin testcase: xfstests
version: xfstests-x86_64-c1144bf-1_20220704
with following parameters:disk: 4HDD fs: xfs test: xfs-group-01 ucode: 0x21test-description: xfstests is a regression test suite for xfs and other files ystems.
test-url:git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.giton test machine: 4 threads 1 sockets Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz with 8G memory
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
If you fix the issue, kindly add following tag
Reported-by kernel test robot <[email protected]>xfs/011 - output mismatch (see /lkp/benchmarks/xfstests/results//xfs/011.out.bad)
Quoted 10 lines
--- tests/xfs/011.out 2022-07-04 16:34:35.000000000 +0000
+++ /lkp/benchmarks/xfstests/results//xfs/011.out.bad 2022-07-11 12:33:58.535910570 +0000
@@ -1,2 +1,14 @@
QA output created by 011
Silence is golden.
+reserve_grant_head (4096:) does not match log_head_lsn (1:8192), possible leak detected.
+write_grant_head (4096:) does not match log_head_lsn (1:8192), possible leak detected.
+reserve_grant_head (4096:) does not match log_head_lsn (1:446464), possible leak detected.
+write_grant_head (4096:) does not match log_head_lsn (1:446464), possible leak detected.
+reserve_grant_head (4096:) does not match log_head_lsn (1:991232), possible leak detected.Yes, this commit changes the structure of the write and reserve grant heads and the output of the relevant sysfs files, so the test will need fixing (or removing) as the leak detection debug information has changed.
-Dave.
Signature · 2 lines
Dave Chinner david(a)fromorbit.com