drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0
Subsystems (3)
PATCH 1/1 drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0
Add ras eeprom i2c function for smu13 v13_0_0.
--- .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 157 ++++++++++++++++++ 1 file changed, 157 insertions(+)
drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +157 -0
@@ -196,6 +196,7 @@ static struct cmn2asic_mapping smu_v13_0_0_table_map[SMU_TABLE_COUNT] = {TAB_MAP (DRIVER_SMU_CONFIG ), TAB_MAP(ACTIVITY_MONITOR_COEFF), [SMU_TABLE_COMBO_PPTABLE ] = {1 ,TABLE_COMBO_PPTABLE }, + TAB_MAP(I2C_COMMANDS), };static struct cmn2asic_mapping smu_v13_0_0_pwr_src_map[SMU_POWER_SOURCE_COUNT ] = {
@@ -1606,9 +1607,165 @@ static bool smu_v13_0_0_is_mode1_reset_supported(struct smu_context *smu)return true; } +static int smu_v13_0_0_i2c_xfer (struct i2c_adapter *i2c_adap, +struct i2c_msg *msg,int num_msgs) +{ +struct amdgpu_smu_i2c_bus *smu_i2c =i2c_get_adapdata (i2c_adap); +struct amdgpu_device *adev = smu_i2c->adev; +struct smu_context *smu = adev->powerplay.pp_handle; +struct smu_table_context *smu_table = &smu->smu_table; +struct smu_table *table = &smu_table->driver_table; +SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr; +int i, j, r, c; +u16 dir; + +if (!adev->pm.dpm_enabled) +return -EBUSY ; + + req =kzalloc (sizeof (*req),GFP_KERNEL ); +if (!req) +return -ENOMEM ; + + req->I2CcontrollerPort = smu_i2c->port; + req->I2CSpeed =I2C_SPEED_FAST_400K ; + req->SlaveAddress = msg[0 ].addr <<1 ;/* wants an 8-bit address */ + dir = msg[0 ].flags &I2C_M_RD ; + +for (c = i =0 ; i < num_msgs; i++) { +for (j =0 ; j < msg[i].len; j++, c++) { +SwI2cCmd_t *cmd = &req->SwI2cCmds[c]; + +if (!(msg[i].flags &I2C_M_RD )) { +/* write */ + cmd->CmdConfig |=CMDCONFIG_READWRITE_MASK ; + cmd->ReadWriteData = msg[i].buf[j]; + } + +if ((dir ^ msg[i].flags) &I2C_M_RD ) { +/* The direction changes. +*/ + dir = msg[i].flags &I2C_M_RD ; + cmd->CmdConfig |=CMDCONFIG_RESTART_MASK ; + } + + req->NumCmds++; + +/* +* Insert STOP if we are at the last byte of either last +* message for the transaction or the client explicitly +* requires a STOP at this particular message. +*/ +if ((j == msg[i].len -1 ) && + ((i == num_msgs -1 ) || (msg[i].flags &I2C_M_STOP ))) { + cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK ; + cmd->CmdConfig |=CMDCONFIG_STOP_MASK ; + } + } + } +mutex_lock (&adev->pm.mutex); + r =smu_cmn_update_table (smu,SMU_TABLE_I2C_COMMANDS ,0 , req, true); +mutex_unlock (&adev->pm.mutex); +if (r) + goto fail; + +for (c = i =0 ; i < num_msgs; i++) { +if (!(msg[i].flags &I2C_M_RD )) { + c += msg[i].len; +continue ; + } +for (j =0 ; j < msg[i].len; j++, c++) { +SwI2cCmd_t *cmd = &res->SwI2cCmds[c]; + + msg[i].buf[j] = cmd->ReadWriteData; + } + } + r = num_msgs; +fail: +kfree (req); +return r; +} + +static u32 smu_v13_0_0_i2c_func (struct i2c_adapter *adap) +{ +return I2C_FUNC_I2C |I2C_FUNC_SMBUS_EMUL ; +} + +static const struct i2c_algorithm smu_v13_0_0_i2c_algo = { + .master_xfer = smu_v13_0_0_i2c_xfer, + .functionality = smu_v13_0_0_i2c_func, +}; + +static const struct i2c_adapter_quirks smu_v13_0_0_i2c_control_quirks = { + .flags =I2C_AQ_COMB |I2C_AQ_COMB_SAME_ADDR |I2C_AQ_NO_ZERO_LEN , + .max_read_len =MAX_SW_I2C_COMMANDS , + .max_write_len =MAX_SW_I2C_COMMANDS , + .max_comb_1st_msg_len =2 , + .max_comb_2nd_msg_len =MAX_SW_I2C_COMMANDS -2 , +}; + +static int smu_v13_0_0_i2c_control_init (struct smu_context *smu) +{ +struct amdgpu_device *adev = smu->adev; +int res, i; + +for (i =0 ; i <MAX_SMU_I2C_BUSES ; i++) { +struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; +struct i2c_adapter *control = &smu_i2c->adapter; + + smu_i2c->adev = adev; + smu_i2c->port = i; +mutex_init (&smu_i2c->mutex); + control->owner =THIS_MODULE ; + control->class =I2C_CLASS_SPD ; + control->dev.parent = &adev->pdev->dev; + control->algo = &smu_v13_0_0_i2c_algo; +snprintf (control->name,sizeof (control->name),"AMDGPU SMU %d" , i); + control->quirks = &smu_v13_0_0_i2c_control_quirks; +i2c_set_adapdata (control, smu_i2c); + + res =i2c_add_adapter (control); +if (res) { +DRM_ERROR ("Failed to register hw i2c, err: %d\n" , res); + goto Out_err; + } + } + +/* assign the buses used for the FRU EEPROM and RAS EEPROM */ +/* XXX ideally this would be something in a vbios data table */ + adev->pm.ras_eeprom_i2c_bus = &adev->pm.smu_i2c[1 ].adapter; + adev->pm.fru_eeprom_i2c_bus = &adev->pm.smu_i2c[0 ].adapter; + +return 0 ; +Out_err: +for ( ; i >=0 ; i--) { +struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; +struct i2c_adapter *control = &smu_i2c->adapter; + +i2c_del_adapter (control); + } +return res; +} + +static void smu_v13_0_0_i2c_control_fini (struct smu_context *smu) +{ +struct amdgpu_device *adev = smu->adev; +int i; + +for (i =0 ; i <MAX_SMU_I2C_BUSES ; i++) { +struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; +struct i2c_adapter *control = &smu_i2c->adapter; + +i2c_del_adapter (control); + } + adev->pm.ras_eeprom_i2c_bus =NULL ; + adev->pm.fru_eeprom_i2c_bus =NULL ; +} +static const struct pptable_funcs smu_v13_0_0_ppt_funcs = { .get_allowed_feature_mask = smu_v13_0_0_get_allowed_feature_mask, .set_default_dpm_table = smu_v13_0_0_set_default_dpm_table, + .i2c_init = smu_v13_0_0_i2c_control_init, + .i2c_fini = smu_v13_0_0_i2c_control_fini, .is_dpm_running = smu_v13_0_0_is_dpm_running, .dump_pptable = smu_v13_0_0_dump_pptable, .init_microcode = smu_v13_0_init_microcode,
Signature · 1 line
2.25.1
[AMD Official Use Only - General]
Regards,
Hawking
-----Original Message-----
From: Chai, Thomas <[email protected]>
Sent: Wednesday, July 20, 2022 10:49
To: [email protected]
Cc: Chai, Thomas <[email protected]>; Zhang, Hawking <[email protected]>; Zhou1, Tao <[email protected]>; Clements, John <[email protected]>; Li, Candice <[email protected]>; Chai, Thomas <[email protected]>; Quan, Evan <[email protected]>; Deucher, Alexander <[email protected]>
Subject: [PATCH] drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0
Add ras eeprom i2c function for smu13 v13_0_0.
--- .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 157 ++++++++++++++++++ 1 file changed, 157 insertions(+)
drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +1 -0
@@ -196,6 +196,7 @@ static struct cmn2asic_mapping smu_v13_0_0_table_map[SMU_TABLE_COUNT] = {TAB_MAP (DRIVER_SMU_CONFIG ), TAB_MAP(ACTIVITY_MONITOR_COEFF), [SMU_TABLE_COMBO_PPTABLE ] = {1 ,TABLE_COMBO_PPTABLE }, + TAB_MAP(I2C_COMMANDS), }; static struct cmn2asic_mapping smu_v13_0_0_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { @@ -1606,9 +1607,165 @@ static bool smu_v13_0_0_is_mode1_reset_supported(struct smu_context *smu)
return true;
}
+static int smu_v13_0_0_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msg, int num_msgs) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = i2c_get_adapdata(i2c_adap);
+ struct amdgpu_device *adev = smu_i2c->adev;
+ struct smu_context *smu = adev->powerplay.pp_handle;
+ struct smu_table_context *smu_table = &smu->smu_table;
+ struct smu_table *table = &smu_table->driver_table;
+ SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr;
+ int i, j, r, c;
+ u16 dir;
+
+ if (!adev->pm.dpm_enabled)
+ return -EBUSY;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ req->I2CcontrollerPort = smu_i2c->port;
+ req->I2CSpeed = I2C_SPEED_FAST_400K;
+ req->SlaveAddress = msg[0].addr << 1; /* wants an 8-bit address */
+ dir = msg[0].flags & I2C_M_RD;
+
+ for (c = i = 0; i < num_msgs; i++) {
+ for (j = 0; j < msg[i].len; j++, c++) {
+ SwI2cCmd_t *cmd = &req->SwI2cCmds[c];
+
+ if (!(msg[i].flags & I2C_M_RD)) {
+ /* write */
+ cmd->CmdConfig |= CMDCONFIG_READWRITE_MASK;
+ cmd->ReadWriteData = msg[i].buf[j];
+ }
+
+ if ((dir ^ msg[i].flags) & I2C_M_RD) {
+ /* The direction changes.
+ */
+ dir = msg[i].flags & I2C_M_RD;
+ cmd->CmdConfig |= CMDCONFIG_RESTART_MASK;
+ }
+
+ req->NumCmds++;
+
+ /*
+ * Insert STOP if we are at the last byte of either last
+ * message for the transaction or the client explicitly
+ * requires a STOP at this particular message.
+ */
+ if ((j == msg[i].len - 1) &&
+ ((i == num_msgs - 1) || (msg[i].flags & I2C_M_STOP))) {
+ cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK;
+ cmd->CmdConfig |= CMDCONFIG_STOP_MASK;
+ }
+ }
+ }
+ mutex_lock(&adev->pm.mutex);
+ r = smu_cmn_update_table(smu, SMU_TABLE_I2C_COMMANDS, 0, req, true);
+ mutex_unlock(&adev->pm.mutex);
+ if (r)
+ goto fail;
+
+ for (c = i = 0; i < num_msgs; i++) {
+ if (!(msg[i].flags & I2C_M_RD)) {
+ c += msg[i].len;
+ continue;
+ }
+ for (j = 0; j < msg[i].len; j++, c++) {
+ SwI2cCmd_t *cmd = &res->SwI2cCmds[c];
+
+ msg[i].buf[j] = cmd->ReadWriteData;
+ }
+ }
+ r = num_msgs;
+fail:
+ kfree(req);
+ return r;
+}
+
+static u32 smu_v13_0_0_i2c_func(struct i2c_adapter *adap) {
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; }
+
+static const struct i2c_algorithm smu_v13_0_0_i2c_algo = {
+ .master_xfer = smu_v13_0_0_i2c_xfer,
+ .functionality = smu_v13_0_0_i2c_func, };
+
+static const struct i2c_adapter_quirks smu_v13_0_0_i2c_control_quirks = {
+ .flags = I2C_AQ_COMB | I2C_AQ_COMB_SAME_ADDR | I2C_AQ_NO_ZERO_LEN,
+ .max_read_len = MAX_SW_I2C_COMMANDS,
+ .max_write_len = MAX_SW_I2C_COMMANDS,
+ .max_comb_1st_msg_len = 2,
+ .max_comb_2nd_msg_len = MAX_SW_I2C_COMMANDS - 2, };
+
+static int smu_v13_0_0_i2c_control_init(struct smu_context *smu) {
+ struct amdgpu_device *adev = smu->adev;
+ int res, i;
+
+ for (i = 0; i < MAX_SMU_I2C_BUSES; i++) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ smu_i2c->adev = adev;
+ smu_i2c->port = i;
+ mutex_init(&smu_i2c->mutex);
+ control->owner = THIS_MODULE;
+ control->class = I2C_CLASS_SPD;
+ control->dev.parent = &adev->pdev->dev;
+ control->algo = &smu_v13_0_0_i2c_algo;
+ snprintf(control->name, sizeof(control->name), "AMDGPU SMU %d", i);
+ control->quirks = &smu_v13_0_0_i2c_control_quirks;
+ i2c_set_adapdata(control, smu_i2c);
+
+ res = i2c_add_adapter(control);
+ if (res) {
+ DRM_ERROR("Failed to register hw i2c, err: %d\n", res);
+ goto Out_err;
+ }
+ }
+
+ /* assign the buses used for the FRU EEPROM and RAS EEPROM */
+ /* XXX ideally this would be something in a vbios data table */
+ adev->pm.ras_eeprom_i2c_bus = &adev->pm.smu_i2c[1].adapter;
+ adev->pm.fru_eeprom_i2c_bus = &adev->pm.smu_i2c[0].adapter;
+
+ return 0;
+Out_err:
+ for ( ; i >= 0; i--) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ i2c_del_adapter(control);
+ }
+ return res;
+}
+
+static void smu_v13_0_0_i2c_control_fini(struct smu_context *smu) {
+ struct amdgpu_device *adev = smu->adev;
+ int i;
+
+ for (i = 0; i < MAX_SMU_I2C_BUSES; i++) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ i2c_del_adapter(control);
+ }
+ adev->pm.ras_eeprom_i2c_bus = NULL;
+ adev->pm.fru_eeprom_i2c_bus = NULL;
+}
+
static const struct pptable_funcs smu_v13_0_0_ppt_funcs = {
.get_allowed_feature_mask = smu_v13_0_0_get_allowed_feature_mask, .set_default_dpm_table = smu_v13_0_0_set_default_dpm_table,
+ .i2c_init = smu_v13_0_0_i2c_control_init,
+ .i2c_fini = smu_v13_0_0_i2c_control_fini,
.is_dpm_running = smu_v13_0_0_is_dpm_running, .dump_pptable = smu_v13_0_0_dump_pptable, .init_microcode = smu_v13_0_init_microcode,
--
2.25.1
[AMD Official Use Only - General]
Fix typo.
Regards,
Hawking
-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Zhang, Hawking
Sent: Wednesday, July 20, 2022 11:26
To: Chai, Thomas <[email protected]>; [email protected]
Cc: Deucher, Alexander <[email protected]>; Zhou1, Tao <[email protected]>; Clements, John <[email protected]>; Quan, Evan <[email protected]>; Li, Candice <[email protected]>
Subject: RE: [PATCH] drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0
[AMD Official Use Only - General]
Regards,
Hawking
-----Original Message-----
From: Chai, Thomas <[email protected]>
Sent: Wednesday, July 20, 2022 10:49
To: [email protected]
Cc: Chai, Thomas <[email protected]>; Zhang, Hawking <[email protected]>; Zhou1, Tao <[email protected]>; Clements, John <[email protected]>; Li, Candice <[email protected]>; Chai, Thomas <[email protected]>; Quan, Evan <[email protected]>; Deucher, Alexander <[email protected]>
Subject: [PATCH] drm/pm/swsmu: add ras eeprom i2c function for smu13 v13_0_0
Add ras eeprom i2c function for smu13 v13_0_0.
--- .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 157 ++++++++++++++++++ 1 file changed, 157 insertions(+)
drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +1 -0
@@ -196,6 +196,7 @@ static struct cmn2asic_mapping smu_v13_0_0_table_map[SMU_TABLE_COUNT] = {TAB_MAP (DRIVER_SMU_CONFIG ), TAB_MAP(ACTIVITY_MONITOR_COEFF), [SMU_TABLE_COMBO_PPTABLE ] = {1 ,TABLE_COMBO_PPTABLE }, + TAB_MAP(I2C_COMMANDS), }; static struct cmn2asic_mapping smu_v13_0_0_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { @@ -1606,9 +1607,165 @@ static bool smu_v13_0_0_is_mode1_reset_supported(struct smu_context *smu)
return true;
}
+static int smu_v13_0_0_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msg, int num_msgs) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = i2c_get_adapdata(i2c_adap);
+ struct amdgpu_device *adev = smu_i2c->adev;
+ struct smu_context *smu = adev->powerplay.pp_handle;
+ struct smu_table_context *smu_table = &smu->smu_table;
+ struct smu_table *table = &smu_table->driver_table;
+ SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr;
+ int i, j, r, c;
+ u16 dir;
+
+ if (!adev->pm.dpm_enabled)
+ return -EBUSY;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ req->I2CcontrollerPort = smu_i2c->port;
+ req->I2CSpeed = I2C_SPEED_FAST_400K;
+ req->SlaveAddress = msg[0].addr << 1; /* wants an 8-bit address */
+ dir = msg[0].flags & I2C_M_RD;
+
+ for (c = i = 0; i < num_msgs; i++) {
+ for (j = 0; j < msg[i].len; j++, c++) {
+ SwI2cCmd_t *cmd = &req->SwI2cCmds[c];
+
+ if (!(msg[i].flags & I2C_M_RD)) {
+ /* write */
+ cmd->CmdConfig |= CMDCONFIG_READWRITE_MASK;
+ cmd->ReadWriteData = msg[i].buf[j];
+ }
+
+ if ((dir ^ msg[i].flags) & I2C_M_RD) {
+ /* The direction changes.
+ */
+ dir = msg[i].flags & I2C_M_RD;
+ cmd->CmdConfig |= CMDCONFIG_RESTART_MASK;
+ }
+
+ req->NumCmds++;
+
+ /*
+ * Insert STOP if we are at the last byte of either last
+ * message for the transaction or the client explicitly
+ * requires a STOP at this particular message.
+ */
+ if ((j == msg[i].len - 1) &&
+ ((i == num_msgs - 1) || (msg[i].flags & I2C_M_STOP))) {
+ cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK;
+ cmd->CmdConfig |= CMDCONFIG_STOP_MASK;
+ }
+ }
+ }
+ mutex_lock(&adev->pm.mutex);
+ r = smu_cmn_update_table(smu, SMU_TABLE_I2C_COMMANDS, 0, req, true);
+ mutex_unlock(&adev->pm.mutex);
+ if (r)
+ goto fail;
+
+ for (c = i = 0; i < num_msgs; i++) {
+ if (!(msg[i].flags & I2C_M_RD)) {
+ c += msg[i].len;
+ continue;
+ }
+ for (j = 0; j < msg[i].len; j++, c++) {
+ SwI2cCmd_t *cmd = &res->SwI2cCmds[c];
+
+ msg[i].buf[j] = cmd->ReadWriteData;
+ }
+ }
+ r = num_msgs;
+fail:
+ kfree(req);
+ return r;
+}
+
+static u32 smu_v13_0_0_i2c_func(struct i2c_adapter *adap) {
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; }
+
+static const struct i2c_algorithm smu_v13_0_0_i2c_algo = {
+ .master_xfer = smu_v13_0_0_i2c_xfer,
+ .functionality = smu_v13_0_0_i2c_func, };
+
+static const struct i2c_adapter_quirks smu_v13_0_0_i2c_control_quirks = {
+ .flags = I2C_AQ_COMB | I2C_AQ_COMB_SAME_ADDR | I2C_AQ_NO_ZERO_LEN,
+ .max_read_len = MAX_SW_I2C_COMMANDS,
+ .max_write_len = MAX_SW_I2C_COMMANDS,
+ .max_comb_1st_msg_len = 2,
+ .max_comb_2nd_msg_len = MAX_SW_I2C_COMMANDS - 2, };
+
+static int smu_v13_0_0_i2c_control_init(struct smu_context *smu) {
+ struct amdgpu_device *adev = smu->adev;
+ int res, i;
+
+ for (i = 0; i < MAX_SMU_I2C_BUSES; i++) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ smu_i2c->adev = adev;
+ smu_i2c->port = i;
+ mutex_init(&smu_i2c->mutex);
+ control->owner = THIS_MODULE;
+ control->class = I2C_CLASS_SPD;
+ control->dev.parent = &adev->pdev->dev;
+ control->algo = &smu_v13_0_0_i2c_algo;
+ snprintf(control->name, sizeof(control->name), "AMDGPU SMU %d", i);
+ control->quirks = &smu_v13_0_0_i2c_control_quirks;
+ i2c_set_adapdata(control, smu_i2c);
+
+ res = i2c_add_adapter(control);
+ if (res) {
+ DRM_ERROR("Failed to register hw i2c, err: %d\n", res);
+ goto Out_err;
+ }
+ }
+
+ /* assign the buses used for the FRU EEPROM and RAS EEPROM */
+ /* XXX ideally this would be something in a vbios data table */
+ adev->pm.ras_eeprom_i2c_bus = &adev->pm.smu_i2c[1].adapter;
+ adev->pm.fru_eeprom_i2c_bus = &adev->pm.smu_i2c[0].adapter;
+
+ return 0;
+Out_err:
+ for ( ; i >= 0; i--) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ i2c_del_adapter(control);
+ }
+ return res;
+}
+
+static void smu_v13_0_0_i2c_control_fini(struct smu_context *smu) {
+ struct amdgpu_device *adev = smu->adev;
+ int i;
+
+ for (i = 0; i < MAX_SMU_I2C_BUSES; i++) {
+ struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i];
+ struct i2c_adapter *control = &smu_i2c->adapter;
+
+ i2c_del_adapter(control);
+ }
+ adev->pm.ras_eeprom_i2c_bus = NULL;
+ adev->pm.fru_eeprom_i2c_bus = NULL;
+}
+
static const struct pptable_funcs smu_v13_0_0_ppt_funcs = {
.get_allowed_feature_mask = smu_v13_0_0_get_allowed_feature_mask, .set_default_dpm_table = smu_v13_0_0_set_default_dpm_table,
+ .i2c_init = smu_v13_0_0_i2c_control_init,
+ .i2c_fini = smu_v13_0_0_i2c_control_fini,
.is_dpm_running = smu_v13_0_0_is_dpm_running, .dump_pptable = smu_v13_0_0_dump_pptable, .init_microcode = smu_v13_0_init_microcode,
--
2.25.1