Skip to contentSkip to conversation

Control VQ is the way net devices use to send changes to the device state, like

PATCH Superseded Eugenio Pérez 1 participant 8 messages Jul 21, 2022

Subsystems (2)

v1 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

cover Control VQ is the way net devices use to send changes to the device state, like

QEMU needs to intercept this queue so it can track these changes and is able to migrate the device. It can do it from 1576dbb5bbc4 ("vdpa: Add x-svq to NetdevVhostVDPAOptions"). However, to enable x-svq implies to shadow all VirtIO device's virtqueues, which will damage performance.

This series adds address space isolation, so the device and the guest communicate directly with them (passthrough) and CVQ communication is split in
two: The guest communicates with QEMU and QEMU forwards the commands to the device.

This series is based on [1], although each one of them adds a feature on isolation and could be merged individually once conflicts are solved.

Comments are welcome. Thanks!

[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg03101.html

Eugenio Pérez (6):
linux-headers: Update kernel headers to v5.19-rc1
vdpa: Use v->shadow_vqs_enabled in vhost_vdpa_svqs_start
vdpa: Allocate SVQ unconditionally
vdpa: Add asid parameter to vhost_vdpa_dma_map/unmap
vdpa: Store x-svq parameter in VhostVDPAState
vdpa: Always start CVQ in SVQ mode

 include/hw/virtio/vhost-vdpa.h               |   8 +-
 include/net/vhost-vdpa.h                     |   1 +
 include/standard-headers/asm-x86/bootparam.h |   1 +
 include/standard-headers/drm/drm_fourcc.h    |  69 ++++++++
 include/standard-headers/linux/ethtool.h     |   1 +
 include/standard-headers/linux/input.h       |   1 +
 include/standard-headers/linux/pci_regs.h    |   1 +
 include/standard-headers/linux/vhost_types.h |  11 +-
 include/standard-headers/linux/virtio_ids.h  |  14 +-
 linux-headers/asm-arm64/kvm.h                |  27 +++
 linux-headers/asm-generic/unistd.h           |   4 +-
 linux-headers/asm-riscv/kvm.h                |  20 +++
 linux-headers/asm-riscv/unistd.h             |   3 +-
 linux-headers/asm-x86/kvm.h                  |  11 +-
 linux-headers/asm-x86/mman.h                 |  14 --
 linux-headers/linux/kvm.h                    |  54 +++++-
 linux-headers/linux/userfaultfd.h            |  10 +-
 linux-headers/linux/vfio.h                   |   4 +-
 linux-headers/linux/vhost.h                  |  26 ++-
 hw/net/vhost_net.c                           |   4 +
 hw/virtio/vhost-vdpa.c                       |  64 +++----
 net/vhost-vdpa.c                             | 166 ++++++++++++++++++-
 hw/virtio/trace-events                       |   4 +-
 23 files changed, 434 insertions(+), 84 deletions(-)
Signature · 1 line
2.31.1
#1 lore raw

PATCH 1/6 linux-headers: Update kernel headers to v5.19-rc1

Main reason is for new vhost_vdpa address space ioctls to be available.

---
 include/standard-headers/asm-x86/bootparam.h |  1 +
 include/standard-headers/drm/drm_fourcc.h    | 69 ++++++++++++++++++++
 include/standard-headers/linux/ethtool.h     |  1 +
 include/standard-headers/linux/input.h       |  1 +
 include/standard-headers/linux/pci_regs.h    |  1 +
 include/standard-headers/linux/vhost_types.h | 11 +++-
 include/standard-headers/linux/virtio_ids.h  | 14 ++--
 linux-headers/asm-arm64/kvm.h                | 27 ++++++++
 linux-headers/asm-generic/unistd.h           |  4 +-
 linux-headers/asm-riscv/kvm.h                | 20 ++++++
 linux-headers/asm-riscv/unistd.h             |  3 +-
 linux-headers/asm-x86/kvm.h                  | 11 ++--
 linux-headers/asm-x86/mman.h                 | 14 ----
 linux-headers/linux/kvm.h                    | 54 ++++++++++++++-
 linux-headers/linux/userfaultfd.h            | 10 ++-
 linux-headers/linux/vfio.h                   |  4 +-
 linux-headers/linux/vhost.h                  | 26 ++++++--
 17 files changed, 229 insertions(+), 42 deletions(-)
include/standard-headers/asm-x86/bootparam.h +1 -0
index 072e2ed546..09811d90cf 100644
@@ -10,6 +10,7 @@
 #define SETUP_EFI			4
 #define SETUP_APPLE_PROPERTIES		5
 #define SETUP_JAILHOUSE			6
+#define SETUP_CC_BLOB			7
 
 #define SETUP_INDIRECT			(1<<31)
 
include/standard-headers/drm/drm_fourcc.h +69 -0

81 lines not on this page · raw message

include/standard-headers/linux/ethtool.h +1 -0
index 38d5a4cd6e..5a99f13471 100644
@@ -1691,6 +1691,7 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT	 = 89,
 	ETHTOOL_LINK_MODE_100baseFX_Half_BIT		 = 90,
 	ETHTOOL_LINK_MODE_100baseFX_Full_BIT		 = 91,
+	ETHTOOL_LINK_MODE_10baseT1L_Full_BIT		 = 92,
 	/* must be last entry */
 	__ETHTOOL_LINK_MODE_MASK_NBITS
 };
include/standard-headers/linux/input.h +1 -0
index 7822c24178..e69c41b0ed 100644
@@ -268,6 +268,7 @@ struct input_mask {
 #define BUS_RMI			0x1D
 #define BUS_CEC			0x1E
 #define BUS_INTEL_ISHTP		0x1F
+#define BUS_AMD_SFH		0x20
 
 /*
  * MT_TOOL types
include/standard-headers/linux/pci_regs.h +1 -0
index bee1a9ed6e..108f8523fa 100644
@@ -616,6 +616,7 @@
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_ASPL_DISABLE	0x2000 /* Auto Slot Power Limit Disable */
 #define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		0x1a	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
include/standard-headers/linux/vhost_types.h +10 -1
index 0bd2684a2a..ce78551b0f 100644
@@ -87,7 +87,7 @@ struct vhost_msg {
 
 struct vhost_msg_v2 {
 	uint32_t type;
-	uint32_t reserved;
+	uint32_t asid;
 	union {
 		struct vhost_iotlb_msg iotlb;
 		uint8_t padding[64];
@@ -153,4 +153,13 @@ struct vhost_vdpa_iova_range {
 /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
 #define VHOST_NET_F_VIRTIO_NET_HDR 27
 
+/* Use message type V2 */
+#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
+/* IOTLB can accept batching hints */
+#define VHOST_BACKEND_F_IOTLB_BATCH  0x2
+/* IOTLB can accept address space identifier through V2 type of IOTLB
+ * message
+ */
+#define VHOST_BACKEND_F_IOTLB_ASID  0x3
+
 #endif
include/standard-headers/linux/virtio_ids.h +7 -7
index 80d76b75bc..7aa2eb7662 100644
@@ -73,12 +73,12 @@
  * Virtio Transitional IDs
  */
 
-#define VIRTIO_TRANS_ID_NET		1000 /* transitional virtio net */
-#define VIRTIO_TRANS_ID_BLOCK		1001 /* transitional virtio block */
-#define VIRTIO_TRANS_ID_BALLOON		1002 /* transitional virtio balloon */
-#define VIRTIO_TRANS_ID_CONSOLE		1003 /* transitional virtio console */
-#define VIRTIO_TRANS_ID_SCSI		1004 /* transitional virtio SCSI */
-#define VIRTIO_TRANS_ID_RNG		1005 /* transitional virtio rng */
-#define VIRTIO_TRANS_ID_9P		1009 /* transitional virtio 9p console */
+#define VIRTIO_TRANS_ID_NET		0x1000 /* transitional virtio net */
+#define VIRTIO_TRANS_ID_BLOCK		0x1001 /* transitional virtio block */
+#define VIRTIO_TRANS_ID_BALLOON		0x1002 /* transitional virtio balloon */
+#define VIRTIO_TRANS_ID_CONSOLE		0x1003 /* transitional virtio console */
+#define VIRTIO_TRANS_ID_SCSI		0x1004 /* transitional virtio SCSI */
+#define VIRTIO_TRANS_ID_RNG		0x1005 /* transitional virtio rng */
+#define VIRTIO_TRANS_ID_9P		0x1009 /* transitional virtio 9p console */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
linux-headers/asm-arm64/kvm.h +27 -0
index 5c28a9737a..286668285f 100644
@@ -139,8 +139,10 @@ struct kvm_guest_debug_arch {
 	__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
 };
 
+#define KVM_DEBUG_ARCH_HSR_HIGH_VALID	(1 << 0)
 struct kvm_debug_exit_arch {
 	__u32 hsr;
+	__u32 hsr_high;	/* ESR_EL2[61:32] */
 	__u64 far;	/* used for watchpoints */
 };
 
@@ -332,6 +334,31 @@ struct kvm_arm_copy_mte_tags {
 #define KVM_ARM64_SVE_VLS_WORDS	\
 	((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1)
 
+/* Bitmap feature firmware registers */
+#define KVM_REG_ARM_FW_FEAT_BMAP		(0x0016 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+						KVM_REG_ARM_FW_FEAT_BMAP |	\
+						((r) & 0xffff))
+
+#define KVM_REG_ARM_STD_BMAP			KVM_REG_ARM_FW_FEAT_BMAP_REG(0)
+
+enum {
+	KVM_REG_ARM_STD_BIT_TRNG_V1_0	= 0,
+};
+
+#define KVM_REG_ARM_STD_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(1)
+
+enum {
+	KVM_REG_ARM_STD_HYP_BIT_PV_TIME	= 0,
+};
+
+#define KVM_REG_ARM_VENDOR_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
+
+enum {
+	KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT	= 0,
+	KVM_REG_ARM_VENDOR_HYP_BIT_PTP		= 1,
+};
+
 /* Device Control API: ARM VGIC */
 #define KVM_DEV_ARM_VGIC_GRP_ADDR	0
 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
linux-headers/asm-generic/unistd.h +2 -2
index 1c48b0ae3b..45fa180cc5 100644
@@ -383,7 +383,7 @@ __SYSCALL(__NR_syslog, sys_syslog)
 
 /* kernel/ptrace.c */
 #define __NR_ptrace 117
-__SYSCALL(__NR_ptrace, sys_ptrace)
+__SC_COMP(__NR_ptrace, sys_ptrace, compat_sys_ptrace)
 
 /* kernel/sched/core.c */
 #define __NR_sched_setparam 118
@@ -779,7 +779,7 @@ __SYSCALL(__NR_rseq, sys_rseq)
 #define __NR_kexec_file_load 294
 __SYSCALL(__NR_kexec_file_load,     sys_kexec_file_load)
 /* 295 through 402 are unassigned to sync up with generic numbers, don't use */
-#if __BITS_PER_LONG == 32
+#if defined(__SYSCALL_COMPAT) || __BITS_PER_LONG == 32
 #define __NR_clock_gettime64 403
 __SYSCALL(__NR_clock_gettime64, sys_clock_gettime)
 #define __NR_clock_settime64 404
linux-headers/asm-riscv/kvm.h +20 -0
index f808ad1ce5..6119368ba6 100644
@@ -82,6 +82,23 @@ struct kvm_riscv_timer {
 	__u64 state;
 };
 
+/*
+ * ISA extension IDs specific to KVM. This is not the same as the host ISA
+ * extension IDs as that is internal to the host and should not be exposed
+ * to the guest. This should always be contiguous to keep the mapping simple
+ * in KVM implementation.
+ */
+enum KVM_RISCV_ISA_EXT_ID {
+	KVM_RISCV_ISA_EXT_A = 0,
+	KVM_RISCV_ISA_EXT_C,
+	KVM_RISCV_ISA_EXT_D,
+	KVM_RISCV_ISA_EXT_F,
+	KVM_RISCV_ISA_EXT_H,
+	KVM_RISCV_ISA_EXT_I,
+	KVM_RISCV_ISA_EXT_M,
+	KVM_RISCV_ISA_EXT_MAX,
+};
+
 /* Possible states for kvm_riscv_timer */
 #define KVM_RISCV_TIMER_STATE_OFF	0
 #define KVM_RISCV_TIMER_STATE_ON	1
@@ -123,6 +140,9 @@ struct kvm_riscv_timer {
 #define KVM_REG_RISCV_FP_D_REG(name)	\
 		(offsetof(struct __riscv_d_ext_state, name) / sizeof(__u64))
 
+/* ISA Extension registers are mapped as type 7 */
+#define KVM_REG_RISCV_ISA_EXT		(0x07 << KVM_REG_RISCV_TYPE_SHIFT)
+
 #endif
 
 #endif /* __LINUX_KVM_RISCV_H */
linux-headers/asm-riscv/unistd.h +2 -1
index 8062996c2d..73d7cdd2ec 100644
@@ -15,12 +15,13 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  */
 
-#ifdef __LP64__
+#if defined(__LP64__) && !defined(__SYSCALL_COMPAT)
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SET_GET_RLIMIT
 #endif /* __LP64__ */
 
 #define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_MEMFD_SECRET
 
 #include <asm-generic/unistd.h>
 
linux-headers/asm-x86/kvm.h +6 -5
index bf6e96011d..21614807a2 100644
@@ -428,11 +428,12 @@ struct kvm_sync_regs {
 	struct kvm_vcpu_events events;
 };
 
-#define KVM_X86_QUIRK_LINT0_REENABLED	   (1 << 0)
-#define KVM_X86_QUIRK_CD_NW_CLEARED	   (1 << 1)
-#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE	   (1 << 2)
-#define KVM_X86_QUIRK_OUT_7E_INC_RIP	   (1 << 3)
-#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4)
+#define KVM_X86_QUIRK_LINT0_REENABLED		(1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED		(1 << 1)
+#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE		(1 << 2)
+#define KVM_X86_QUIRK_OUT_7E_INC_RIP		(1 << 3)
+#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT	(1 << 4)
+#define KVM_X86_QUIRK_FIX_HYPERCALL_INSN	(1 << 5)
 
 #define KVM_STATE_NESTED_FORMAT_VMX	0
 #define KVM_STATE_NESTED_FORMAT_SVM	1
linux-headers/asm-x86/mman.h +0 -14
index d4a8d0424b..775dbd3aff 100644
@@ -5,20 +5,6 @@
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
 #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
-/*
- * Take the 4 protection key bits out of the vma->vm_flags
- * value and turn them in to the bits that we can put in
- * to a pte.
- *
- * Only override these if Protection Keys are available
- * (which is only on 64-bit).
- */
-#define arch_vm_get_page_prot(vm_flags)	__pgprot(	\
-		((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) |	\
-		((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
-
 #define arch_calc_vm_prot_bits(prot, key) (		\
 		((key) & 0x1 ? VM_PKEY_BIT0 : 0) |      \
 		((key) & 0x2 ? VM_PKEY_BIT1 : 0) |      \
linux-headers/linux/kvm.h +52 -2

114 lines not on this page · raw message

linux-headers/linux/userfaultfd.h +8 -2
index 769b8379e4..a3a377cd44 100644
@@ -33,7 +33,8 @@
 			   UFFD_FEATURE_THREAD_ID |		\
 			   UFFD_FEATURE_MINOR_HUGETLBFS |	\
 			   UFFD_FEATURE_MINOR_SHMEM |		\
-			   UFFD_FEATURE_EXACT_ADDRESS)
+			   UFFD_FEATURE_EXACT_ADDRESS |		\
+			   UFFD_FEATURE_WP_HUGETLBFS_SHMEM)
 #define UFFD_API_IOCTLS				\
 	((__u64)1 << _UFFDIO_REGISTER |		\
 	 (__u64)1 << _UFFDIO_UNREGISTER |	\
@@ -47,7 +48,8 @@
 #define UFFD_API_RANGE_IOCTLS_BASIC		\
 	((__u64)1 << _UFFDIO_WAKE |		\
 	 (__u64)1 << _UFFDIO_COPY |		\
-	 (__u64)1 << _UFFDIO_CONTINUE)
+	 (__u64)1 << _UFFDIO_CONTINUE |		\
+	 (__u64)1 << _UFFDIO_WRITEPROTECT)
 
 /*
  * Valid ioctl command number range with this API is from 0x00 to
@@ -194,6 +196,9 @@ struct uffdio_api {
 	 * UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page
 	 * faults would be provided and the offset within the page would not be
 	 * masked.
+	 *
+	 * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd
+	 * write-protection mode is supported on both shmem and hugetlbfs.
 	 */
 #define UFFD_FEATURE_PAGEFAULT_FLAG_WP		(1<<0)
 #define UFFD_FEATURE_EVENT_FORK			(1<<1)
@@ -207,6 +212,7 @@ struct uffdio_api {
 #define UFFD_FEATURE_MINOR_HUGETLBFS		(1<<9)
 #define UFFD_FEATURE_MINOR_SHMEM		(1<<10)
 #define UFFD_FEATURE_EXACT_ADDRESS		(1<<11)
+#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM		(1<<12)
 	__u64 features;
 
 	__u64 ioctls;
linux-headers/linux/vfio.h +2 -2
index e9f7795c39..ede44b5572 100644
@@ -643,7 +643,7 @@ enum {
 };
 
 /**
- * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
+ * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
  *					      struct vfio_pci_hot_reset_info)
  *
  * Return: 0 on success, -errno on failure:
@@ -770,7 +770,7 @@ struct vfio_device_ioeventfd {
 #define VFIO_DEVICE_IOEVENTFD		_IO(VFIO_TYPE, VFIO_BASE + 16)
 
 /**
- * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17,
+ * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
  *			       struct vfio_device_feature)
  *
  * Get, set, or probe feature data of the device.  The feature is selected
linux-headers/linux/vhost.h +20 -6
index 5d99e7c242..cab645d4a6 100644
@@ -89,11 +89,6 @@
 
 /* Set or get vhost backend capability */
 
-/* Use message type V2 */
-#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
-/* IOTLB can accept batching hints */
-#define VHOST_BACKEND_F_IOTLB_BATCH  0x2
-
 #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
 #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
 
@@ -150,11 +145,30 @@
 /* Get the valid iova range */
 #define VHOST_VDPA_GET_IOVA_RANGE	_IOR(VHOST_VIRTIO, 0x78, \
 					     struct vhost_vdpa_iova_range)
-
 /* Get the config size */
 #define VHOST_VDPA_GET_CONFIG_SIZE	_IOR(VHOST_VIRTIO, 0x79, __u32)
 
 /* Get the count of all virtqueues */
 #define VHOST_VDPA_GET_VQS_COUNT	_IOR(VHOST_VIRTIO, 0x80, __u32)
 
+/* Get the number of virtqueue groups. */
+#define VHOST_VDPA_GET_GROUP_NUM	_IOR(VHOST_VIRTIO, 0x81, __u32)
+
+/* Get the number of address spaces. */
+#define VHOST_VDPA_GET_AS_NUM		_IOR(VHOST_VIRTIO, 0x7A, unsigned int)
+
+/* Get the group for a virtqueue: read index, write group in num,
+ * The virtqueue index is stored in the index field of
+ * vhost_vring_state. The group for this specific virtqueue is
+ * returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_GROUP	_IOWR(VHOST_VIRTIO, 0x7B,	\
+					      struct vhost_vring_state)
+/* Set the ASID for a virtqueue group. The group index is stored in
+ * the index field of vhost_vring_state, the ASID associated with this
+ * group is stored at num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_SET_GROUP_ASID	_IOW(VHOST_VIRTIO, 0x7C, \
+					     struct vhost_vring_state)
+
 #endif
Signature · 1 line
2.31.1
#2 lore raw

PATCH 2/6 vdpa: Use v->shadow_vqs_enabled in vhost_vdpa_svqs_start

In reply to Eugenio Pérez

This function used to trust in v->shadow_vqs != NULL to know if it must start svq or not.

This is not going to be valid anymore, as qemu is going to allocate svq unconditionally (but it will only start them conditionally).

---
 hw/virtio/vhost-vdpa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/virtio/vhost-vdpa.c +1 -1
index 9a2daef7e3..29f8262e29 100644
@@ -1019,7 +1019,7 @@ static bool vhost_vdpa_svqs_start(struct vhost_dev *dev)
     Error *err = NULL;
     unsigned i;
 
-    if (!v->shadow_vqs) {
+    if (!v->shadow_vqs_enabled) {
         return true;
     }
 
Signature · 1 line
2.31.1
#3 lore raw

PATCH 3/6 vdpa: Allocate SVQ unconditionally

In reply to Eugenio Pérez

SVQ may run or not in a device depending on runtime conditions (for example, if the device can move CVQ to its own group or not).

Allocate the resources unconditionally, and decide later if to use them or not.

---
 hw/virtio/vhost-vdpa.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)
hw/virtio/vhost-vdpa.c +15 -18
index 29f8262e29..95014d3736 100644
@@ -400,6 +400,21 @@ static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
     int r;
     bool ok;
 
+    shadow_vqs = g_ptr_array_new_full(hdev->nvqs, vhost_svq_free);
+    for (unsigned n = 0; n < hdev->nvqs; ++n) {
+        g_autoptr(VhostShadowVirtqueue) svq;
+
+        svq = vhost_svq_new(v->iova_tree, v->shadow_vq_ops,
+                            v->shadow_vq_ops_opaque);
+        if (unlikely(!svq)) {
+            error_setg(errp, "Cannot create svq %u", n);
+            return -1;
+        }
+        g_ptr_array_add(shadow_vqs, g_steal_pointer(&svq));
+    }
+
+    v->shadow_vqs = g_steal_pointer(&shadow_vqs);
+
     if (!v->shadow_vqs_enabled) {
         return 0;
     }
@@ -416,20 +431,6 @@ static int vhost_vdpa_init_svq(struct vhost_dev *hdev, struct vhost_vdpa *v,
         return -1;
     }
 
-    shadow_vqs = g_ptr_array_new_full(hdev->nvqs, vhost_svq_free);
-    for (unsigned n = 0; n < hdev->nvqs; ++n) {
-        g_autoptr(VhostShadowVirtqueue) svq;
-
-        svq = vhost_svq_new(v->iova_tree, v->shadow_vq_ops,
-                            v->shadow_vq_ops_opaque);
-        if (unlikely(!svq)) {
-            error_setg(errp, "Cannot create svq %u", n);
-            return -1;
-        }
-        g_ptr_array_add(shadow_vqs, g_steal_pointer(&svq));
-    }
-
-    v->shadow_vqs = g_steal_pointer(&shadow_vqs);
     return 0;
 }
 
@@ -570,10 +571,6 @@ static void vhost_vdpa_svq_cleanup(struct vhost_dev *dev)
     struct vhost_vdpa *v = dev->opaque;
     size_t idx;
 
-    if (!v->shadow_vqs) {
-        return;
-    }
-
     for (idx = 0; idx < v->shadow_vqs->len; ++idx) {
         vhost_svq_stop(g_ptr_array_index(v->shadow_vqs, idx));
     }
Signature · 1 line
2.31.1
#4 lore raw

PATCH 4/6 vdpa: Add asid parameter to vhost_vdpa_dma_map/unmap

In reply to Eugenio Pérez

So the caller can choose which ASID is destined.

No need to update the batch functions as they will always be called from memory listener updates at the moment. Memory listener updates will always update ASID 0, as it's the passthrough ASID.

All vhost devices's ASID are 0 at this moment.

---
 include/hw/virtio/vhost-vdpa.h |  8 +++++---
 hw/virtio/vhost-vdpa.c         | 26 ++++++++++++++++----------
 net/vhost-vdpa.c               |  6 +++---
 hw/virtio/trace-events         |  4 ++--
 4 files changed, 26 insertions(+), 18 deletions(-)
include/hw/virtio/vhost-vdpa.h +5 -3
index 1111d85643..6560bb9d78 100644
@@ -29,6 +29,7 @@ typedef struct vhost_vdpa {
     int index;
     uint32_t msg_type;
     bool iotlb_batch_begin_sent;
+    uint32_t address_space_id;
     MemoryListener listener;
     struct vhost_vdpa_iova_range iova_range;
     uint64_t acked_features;
@@ -42,8 +43,9 @@ typedef struct vhost_vdpa {
     VhostVDPAHostNotifier notifier[VIRTIO_QUEUE_MAX];
 } VhostVDPA;
 
-int vhost_vdpa_dma_map(struct vhost_vdpa *v, hwaddr iova, hwaddr size,
-                       void *vaddr, bool readonly);
-int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, hwaddr iova, hwaddr size);
+int vhost_vdpa_dma_map(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
+                       hwaddr size, void *vaddr, bool readonly);
+int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
+                         hwaddr size);
 
 #endif
hw/virtio/vhost-vdpa.c +16 -10
index 95014d3736..30f3e204a0 100644
@@ -72,22 +72,24 @@ static bool vhost_vdpa_listener_skipped_section(MemoryRegionSection *section,
     return false;
 }
 
-int vhost_vdpa_dma_map(struct vhost_vdpa *v, hwaddr iova, hwaddr size,
-                       void *vaddr, bool readonly)
+int vhost_vdpa_dma_map(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
+                       hwaddr size, void *vaddr, bool readonly)
 {
     struct vhost_msg_v2 msg = {};
     int fd = v->device_fd;
     int ret = 0;
 
     msg.type = v->msg_type;
+    msg.asid = asid;
     msg.iotlb.iova = iova;
     msg.iotlb.size = size;
     msg.iotlb.uaddr = (uint64_t)(uintptr_t)vaddr;
     msg.iotlb.perm = readonly ? VHOST_ACCESS_RO : VHOST_ACCESS_RW;
     msg.iotlb.type = VHOST_IOTLB_UPDATE;
 
-   trace_vhost_vdpa_dma_map(v, fd, msg.type, msg.iotlb.iova, msg.iotlb.size,
-                            msg.iotlb.uaddr, msg.iotlb.perm, msg.iotlb.type);
+    trace_vhost_vdpa_dma_map(v, fd, msg.type, msg.asid, msg.iotlb.iova,
+                             msg.iotlb.size, msg.iotlb.uaddr, msg.iotlb.perm,
+                             msg.iotlb.type);
 
     if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) {
         error_report("failed to write, fd=%d, errno=%d (%s)",
@@ -98,18 +100,20 @@ int vhost_vdpa_dma_map(struct vhost_vdpa *v, hwaddr iova, hwaddr size,
     return ret;
 }
 
-int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, hwaddr iova, hwaddr size)
+int vhost_vdpa_dma_unmap(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
+                         hwaddr size)
 {
     struct vhost_msg_v2 msg = {};
     int fd = v->device_fd;
     int ret = 0;
 
     msg.type = v->msg_type;
+    msg.asid = asid;
     msg.iotlb.iova = iova;
     msg.iotlb.size = size;
     msg.iotlb.type = VHOST_IOTLB_INVALIDATE;
 
-    trace_vhost_vdpa_dma_unmap(v, fd, msg.type, msg.iotlb.iova,
+    trace_vhost_vdpa_dma_unmap(v, fd, msg.type, msg.asid, msg.iotlb.iova,
                                msg.iotlb.size, msg.iotlb.type);
 
     if (write(fd, &msg, sizeof(msg)) != sizeof(msg)) {
@@ -228,7 +232,7 @@ static void vhost_vdpa_listener_region_add(MemoryListener *listener,
     }
 
     vhost_vdpa_iotlb_batch_begin_once(v);
-    ret = vhost_vdpa_dma_map(v, iova, int128_get64(llsize),
+    ret = vhost_vdpa_dma_map(v, 0, iova, int128_get64(llsize),
                              vaddr, section->readonly);
     if (ret) {
         error_report("vhost vdpa map fail!");
@@ -293,7 +297,7 @@ static void vhost_vdpa_listener_region_del(MemoryListener *listener,
         vhost_iova_tree_remove(v->iova_tree, result);
     }
     vhost_vdpa_iotlb_batch_begin_once(v);
-    ret = vhost_vdpa_dma_unmap(v, iova, int128_get64(llsize));
+    ret = vhost_vdpa_dma_unmap(v, 0, iova, int128_get64(llsize));
     if (ret) {
         error_report("vhost_vdpa dma unmap error!");
     }
@@ -884,7 +888,7 @@ static bool vhost_vdpa_svq_unmap_ring(struct vhost_vdpa *v,
     }
 
     size = ROUND_UP(result->size, qemu_real_host_page_size());
-    r = vhost_vdpa_dma_unmap(v, result->iova, size);
+    r = vhost_vdpa_dma_unmap(v, v->address_space_id, result->iova, size);
     return r == 0;
 }
 
@@ -926,7 +930,8 @@ static bool vhost_vdpa_svq_map_ring(struct vhost_vdpa *v, DMAMap *needle,
         return false;
     }
 
-    r = vhost_vdpa_dma_map(v, needle->iova, needle->size + 1,
+    r = vhost_vdpa_dma_map(v, v->address_space_id, needle->iova,
+                           needle->size + 1,
                            (void *)(uintptr_t)needle->translated_addr,
                            needle->perm == IOMMU_RO);
     if (unlikely(r != 0)) {
@@ -1092,6 +1097,7 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
 
     if (started) {
         vhost_vdpa_host_notifiers_init(dev);
+
         ok = vhost_vdpa_svqs_start(dev);
         if (unlikely(!ok)) {
             return -1;
net/vhost-vdpa.c +3 -3
index 82c115bee4..15ae93bd32 100644
@@ -239,7 +239,7 @@ static void vhost_vdpa_cvq_unmap_buf(struct vhost_vdpa *v, void *addr)
         return;
     }
 
-    r = vhost_vdpa_dma_unmap(v, map->iova, map->size + 1);
+    r = vhost_vdpa_dma_unmap(v, v->address_space_id, map->iova, map->size + 1);
     if (unlikely(r != 0)) {
         error_report("Device cannot unmap: %s(%d)", g_strerror(r), r);
     }
@@ -288,8 +288,8 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v,
         return false;
     }
 
-    r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,
-                           !write);
+    r = vhost_vdpa_dma_map(v, v->address_space_id, map.iova,
+                           vhost_vdpa_net_cvq_cmd_page_len(), buf, !write);
     if (unlikely(r < 0)) {
         goto dma_map_err;
     }
hw/virtio/trace-events +2 -2
index 20af2e7ebd..36e5ae75f6 100644
@@ -26,8 +26,8 @@ vhost_user_write(uint32_t req, uint32_t flags) "req:%d flags:0x%"PRIx32""
 vhost_user_create_notifier(int idx, void *n) "idx:%d n:%p"
 
 # vhost-vdpa.c
-vhost_vdpa_dma_map(void *vdpa, int fd, uint32_t msg_type, uint64_t iova, uint64_t size, uint64_t uaddr, uint8_t perm, uint8_t type) "vdpa:%p fd: %d msg_type: %"PRIu32" iova: 0x%"PRIx64" size: 0x%"PRIx64" uaddr: 0x%"PRIx64" perm: 0x%"PRIx8" type: %"PRIu8
-vhost_vdpa_dma_unmap(void *vdpa, int fd, uint32_t msg_type, uint64_t iova, uint64_t size, uint8_t type) "vdpa:%p fd: %d msg_type: %"PRIu32" iova: 0x%"PRIx64" size: 0x%"PRIx64" type: %"PRIu8
+vhost_vdpa_dma_map(void *vdpa, int fd, uint32_t msg_type, uint32_t asid, uint64_t iova, uint64_t size, uint64_t uaddr, uint8_t perm, uint8_t type) "vdpa:%p fd: %d msg_type: %"PRIu32" asid: %"PRIu32" iova: 0x%"PRIx64" size: 0x%"PRIx64" uaddr: 0x%"PRIx64" perm: 0x%"PRIx8" type: %"PRIu8
+vhost_vdpa_dma_unmap(void *vdpa, int fd, uint32_t msg_type, uint32_t asid, uint64_t iova, uint64_t size, uint8_t type) "vdpa:%p fd: %d msg_type: %"PRIu32" asid: %"PRIu32" iova: 0x%"PRIx64" size: 0x%"PRIx64" type: %"PRIu8
 vhost_vdpa_listener_begin_batch(void *v, int fd, uint32_t msg_type, uint8_t type)  "vdpa:%p fd: %d msg_type: %"PRIu32" type: %"PRIu8
 vhost_vdpa_listener_commit(void *v, int fd, uint32_t msg_type, uint8_t type)  "vdpa:%p fd: %d msg_type: %"PRIu32" type: %"PRIu8
 vhost_vdpa_listener_region_add(void *vdpa, uint64_t iova, uint64_t llend, void *vaddr, bool readonly) "vdpa: %p iova 0x%"PRIx64" llend 0x%"PRIx64" vaddr: %p read-only: %d"
Signature · 1 line
2.31.1
#5 lore raw

PATCH 5/6 vdpa: Store x-svq parameter in VhostVDPAState

In reply to Eugenio Pérez

CVQ can be shadowed two ways:
- Device has x-svq=on parameter (current way)
- The device can isolate CVQ in its own vq group

QEMU needs to check for the second condition dynamically, because CVQ index is not known at initialization time. Since this is dynamic, the CVQ isolation could vary with different conditions, making it possible to go from "not isolated group" to "isolated".

Saving the cmdline parameter in an extra field so we never disable CVQ SVQ in case the device was started with cmdline.

---
 net/vhost-vdpa.c | 4 ++++
 1 file changed, 4 insertions(+)
net/vhost-vdpa.c +4 -0
index 15ae93bd32..90394fefdf 100644
@@ -36,6 +36,9 @@ typedef struct VhostVDPAState {
 
     /* Control commands shadow buffers */
     void *cvq_cmd_out_buffer, *cvq_cmd_in_buffer;
+
+    /* The device always have SVQ enabled */
+    bool always_svq;
     bool started;
 } VhostVDPAState;
 
@@ -561,6 +564,7 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
 
     s->vhost_vdpa.device_fd = vdpa_device_fd;
     s->vhost_vdpa.index = queue_pair_index;
+    s->always_svq = svq;
     s->vhost_vdpa.shadow_vqs_enabled = svq;
     s->vhost_vdpa.iova_tree = iova_tree;
     if (!is_datapath) {
Signature · 1 line
2.31.1
#6 lore raw

PATCH 6/6 vdpa: Always start CVQ in SVQ mode

In reply to Eugenio Pérez

Isolate control virtqueue in its own group, allowing to intercept control commands but letting dataplane run totally passthrough to the guest.

---
 include/net/vhost-vdpa.h |   1 +
 hw/net/vhost_net.c       |   4 +
 hw/virtio/vhost-vdpa.c   |   3 +-
 net/vhost-vdpa.c         | 156 ++++++++++++++++++++++++++++++++++++++-
 4 files changed, 159 insertions(+), 5 deletions(-)
include/net/vhost-vdpa.h +1 -0
index 38d65e845d..ea0ba06efb 100644
@@ -15,6 +15,7 @@
 #define TYPE_VHOST_VDPA "vhost-vdpa"
 
 struct vhost_net *vhost_vdpa_get_vhost_net(NetClientState *nc);
+void vhost_vdpa_net_prepare(NetClientState *nc);
 int vhost_vdpa_start(NetClientState *nc);
 
 extern const int vdpa_feature_bits[];
hw/net/vhost_net.c +4 -0
index f9cebd9716..d42df02706 100644
@@ -244,6 +244,10 @@ static int vhost_net_start_one(struct vhost_net *net,
     struct vhost_vring_file file = { };
     int r;
 
+    if (net->nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
+        vhost_vdpa_net_prepare(net->nc);
+    }
+
     r = vhost_dev_enable_notifiers(&net->dev, dev);
     if (r < 0) {
         goto fail_notifiers;
hw/virtio/vhost-vdpa.c +2 -1
index 30f3e204a0..65ed20de23 100644
@@ -668,7 +668,8 @@ static int vhost_vdpa_set_backend_cap(struct vhost_dev *dev)
 {
     uint64_t features;
     uint64_t f = 0x1ULL << VHOST_BACKEND_F_IOTLB_MSG_V2 |
-        0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH;
+        0x1ULL << VHOST_BACKEND_F_IOTLB_BATCH |
+        0x1ULL << VHOST_BACKEND_F_IOTLB_ASID;
     int r;
 
     if (vhost_vdpa_call(dev, VHOST_GET_BACKEND_FEATURES, &features)) {
net/vhost-vdpa.c +152 -4

223 lines not on this page · raw message

Signature · 1 line
2.31.1
#7 lore raw
In reply to Eugenio Pérez
Quoted 12 lines · Eugenio Pérez

QEMU needs to intercept this queue so it can track these changes and is able to migrate the device. It can do it from 1576dbb5bbc4 ("vdpa: Add x-svq to NetdevVhostVDPAOptions"). However, to enable x-svq implies to shadow all VirtIO device's virtqueues, which will damage performance.

This series adds address space isolation, so the device and the guest communicate directly with them (passthrough) and CVQ communication is split in
two: The guest communicates with QEMU and QEMU forwards the commands to the device.

Quoted 7 lines

This series is based on [1], although each one of them adds a feature on isolation and could be merged individually once conflicts are solved.

Comments are welcome. Thanks!

[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg03101.html

The title of this series should be "vDPA net ASID support" or something like that, I forgot that first line by mistake.

Should I resend it or can it stay like that?

Thanks!