mlx5 fixes 2022-07-28
From: Saeed Mahameed <[email protected]>
This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem.
Thanks,
Saeed.
The following changes since commit 4d3d3a1b244fd54629a6b7047f39a7bbc8d11910:
stmmac: dwmac-mediatek: fix resource leak in probe (2022-07-28 10:43:04 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-fixes-2022-07-28
for you to fetch changes up to 42b4f7f66a43cdb9216e76e595c8a9af154806da:
net/mlx5: Fix driver use of uninitialized timeout (2022-07-28 13:44:41 -0700)
----------------------------------------------------------------
mlx5-fixes-2022-07-28
----------------------------------------------------------------
Gal Pressman (1):
net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
Maher Sanalla (1):
net/mlx5: Adjust log_max_qp to be 18 at most
Maor Dickman (1):
net/mlx5e: TC, Fix post_act to not match on in_port metadata
Maxim Mikityanskiy (3):
net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS net/mlx5e: xsk: Account for XSK RQ UMRs when calculating ICOSQ size net/mlx5e: Fix calculations related to max MPWQE size
Shay Drory (1):
net/mlx5: Fix driver use of uninitialized timeout
Vlad Buslov (1):
net/mlx5e: Modify slow path rules to go to slow fdb
Yevgeny Kliteynik (1):
net/mlx5: DR, Fix SMFS steering info dump format
drivers/net/ethernet/mellanox/mlx5/core/en.h | 21 ++++++++++---------- .../net/ethernet/mellanox/mlx5/core/en/params.c | 12 +++++++++++ .../ethernet/mellanox/mlx5/core/en/tc/post_act.c | 1 + .../ethernet/mellanox/mlx5/core/en_accel/ktls.c | 2 +- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 23 ++++++++++++++++------ drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 11 ++++------- drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h | 1 - drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 +--- .../ethernet/mellanox/mlx5/core/steering/dr_dbg.c | 13 +++++++----- 9 files changed, 55 insertions(+), 33 deletions(-)
PATCH 1/9 net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
From: Gal Pressman <[email protected]>
The driver reports whether TX/RX TLS device offloads are supported, but not which ciphers/versions, these should be handled by returning -EOPNOTSUPP when .tls_dev_add() is called.
Remove the WARN_ON kernel trace when the driver gets a request to offload a cipher/version that is not supported as it is expected.
--- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.c +1 -1
@@ -54,7 +54,7 @@ static int mlx5e_ktls_add(struct net_device *netdev, struct sock *sk,struct mlx5_core_dev *mdev = priv->mdev;int err; -if (WARN_ON (!mlx5e_ktls_type_check (mdev, crypto_info))) +if (!mlx5e_ktls_type_check (mdev, crypto_info))return -EOPNOTSUPP ;if (direction ==TLS_OFFLOAD_CTX_DIR_TX )
Signature · 1 line
2.37.1
PATCH 3/9 net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS
In reply to Saeed MahameedFrom: Maxim Mikityanskiy <[email protected]>
MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of 1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit into u16. This commit replaces it with the maximum value that still fits u16.
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +1 -1
@@ -109,7 +109,7 @@ struct page_pool;#define MLX5E_REQUIRED_WQE_MTTS (MLX5_ALIGN_MTTS(MLX5_MPWRQ_PAGES_PER_WQE + 1))#define MLX5E_REQUIRED_MTTS (wqes) (wqes * MLX5E_REQUIRED_WQE_MTTS)#define MLX5E_MAX_RQ_NUM_MTTS \ - ((1 << 16) * 2)/* So that MLX5_MTT_OCTW(num_mtts) fits into u16 */ + (ALIGN_DOWN(U16_MAX, 4) * 2)/* So that MLX5_MTT_OCTW(num_mtts) fits into u16 */ #define MLX5E_ORDER2_MAX_PACKET_MTU (order_base_2(10 * 1024))#define MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE_MPW \ (ilog2(MLX5E_MAX_RQ_NUM_MTTS / MLX5E_REQUIRED_WQE_MTTS))
Signature · 1 line
2.37.1
PATCH 2/9 net/mlx5e: TC, Fix post_act to not match on in_port metadata
In reply to Saeed MahameedFrom: Maor Dickman <[email protected]>
The cited commit changed CT to use multi table actions post act infrastructure instead of using it own post act infrastructure, this broke decap during VF tunnel offload (Stack devices) with CT due to wrong match on in_port metadata in the post act table. This changed only broke VF tunnel offload because it modify the packet in_port metadata to be VF metadata and it isn't propagate the post act creation.
Fixed by modify post act rules to match only on fte_id and not match on in_port metadata which isn't needed.
--- drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c +1 -0
@@ -128,6 +128,7 @@ mlx5e_tc_post_act_add(struct mlx5e_post_act *post_act, struct mlx5_flow_attr *at post_attr->inner_match_level =MLX5_MATCH_NONE ; post_attr->outer_match_level =MLX5_MATCH_NONE ; post_attr->action &= ~MLX5_FLOW_CONTEXT_ACTION_DECAP ; + post_attr->flags |=MLX5_ATTR_FLAG_NO_IN_PORT ; handle->ns_type = post_act->ns_type;/* Splits were handled before post action */
Signature · 1 line
2.37.1
PATCH 4/9 net/mlx5e: xsk: Account for XSK RQ UMRs when calculating ICOSQ size
In reply to Saeed MahameedFrom: Maxim Mikityanskiy <[email protected]>
ICOSQ is used to post UMR WQEs for both regular RQ and XSK RQ. However, space in ICOSQ is reserved only for the regular RQ, which may cause ICOSQ overflows when using XSK (the most risk is on activating channels).
This commit fixes the issue by reserving space for XSK UMR WQEs as well. As XSK may be enabled without restarting the channel and recreating the ICOSQ, this space is reserved unconditionally.
--- drivers/net/ethernet/mellanox/mlx5/core/en/params.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en/params.c +12 -0
@@ -790,8 +790,20 @@ static u8 mlx5e_build_icosq_log_wq_sz(struct mlx5_core_dev *mdev,return MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE ; wqebbs =MLX5E_UMR_WQEBBS *BIT (mlx5e_get_rq_log_wq_sz (rqp->rqc)); + +/* If XDP program is attached, XSK may be turned on at any time without +* restarting the channel. ICOSQ must be big enough to fit UMR WQEs of +* both regular RQ and XSK RQ. +* Although mlx5e_mpwqe_get_log_rq_size accepts mlx5e_xsk_param, it +* doesn't affect its return value, as long as params->xdp_prog != NULL, +* so we can just multiply by 2. +*/ +if (params->xdp_prog) + wqebbs *=2 ; +if (params->packet_merge.type ==MLX5E_PACKET_MERGE_SHAMPO ) wqebbs +=mlx5e_shampo_icosq_sz (mdev, params, rqp); +return max_t (u8,MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE ,order_base_2 (wqebbs)); }
Signature · 1 line
2.37.1
PATCH 5/9 net/mlx5e: Fix calculations related to max MPWQE size
In reply to Saeed MahameedFrom: Maxim Mikityanskiy <[email protected]>
Before commit 76c31e5f7585 ("net/mlx5e: Use FW limitation for max MPW WQEBBs"), the maximum size of MPWQE in WQEBBs was hardcoded as a driver constant. That commit started using the firmware capability that can further limit the size, however, it unintentionally changed a few things:
1. The calculation of MLX5E_MAX_KLM_PER_WQE used the size in DS, which was replaced by the size in WQEBBs, making the resulting value 4 times smaller.
2. MLX5E_TX_MPW_MAX_WQEBBS used to be aligned to the cache line size (either 64 or 128 bytes, i.e. 1 or 2 WQEBBs), but it's no longer the case if the firmware capability is smaller than the driver maximum.
Fix both issues by using the correct units for MLX5E_MAX_KLM_PER_WQE and by aligning mlx5e_get_sw_max_sq_mpw_wqebbs after taking the minimum.
Besides fixing the arithmetics in calculation of MLX5E_MAX_KLM_PER_WQE, also use appropriate constants: size of BSF * num of DS per WQEBB * number of WQEBBs (the calculation before the blamed commit) doesn't make much sense to calculate the WQE size in bytes, so just use size of WQEBB * number of WQEBBs.
While at it, replace the types that hold the number of WQEBBs by u8. These values don't exceed 16, and it allows to fill holes in two structs.
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +10 -9
@@ -174,8 +174,8 @@ struct page_pool; ALIGN_DOWN(MLX5E_KLM_MAX_ENTRIES_PER_WQE(wqe_size), MLX5_UMR_KLM_ALIGNMENT)#define MLX5E_MAX_KLM_PER_WQE (mdev) \ - MLX5E_KLM_ENTRIES_PER_WQE(mlx5e_get_sw_max_sq_mpw_wqebbs(mlx5e_get_max_sq_wqebbs(mdev)) \ - << MLX5_MKEY_BSF_OCTO_SIZE) + MLX5E_KLM_ENTRIES_PER_WQE(MLX5_SEND_WQE_BB * \ + mlx5e_get_sw_max_sq_mpw_wqebbs(mlx5e_get_max_sq_wqebbs(mdev)))#define MLX5E_MSG_LEVEL NETIF_MSG_LINK
@@ -233,7 +233,7 @@ static inline u16 mlx5e_get_max_sq_wqebbs(struct mlx5_core_dev *mdev) MLX5_CAP_GEN(mdev, max_wqe_sz_sq) / MLX5_SEND_WQE_BB); } -static inline u16 mlx5e_get_sw_max_sq_mpw_wqebbs (u16 max_sq_wqebbs) +static inline u8 mlx5e_get_sw_max_sq_mpw_wqebbs (u8 max_sq_wqebbs) {/* The return value will be multiplied by MLX5_SEND_WQEBB_NUM_DS. * Since max_sq_wqebbs may be up to MLX5_SEND_WQE_MAX_WQEBBS == 16,
@@ -242,11 +242,12 @@ static inline u16 mlx5e_get_sw_max_sq_mpw_wqebbs(u16 max_sq_wqebbs)* than MLX5_SEND_WQE_MAX_WQEBBS to let a full-session WQE be * cache-aligned. */ -#if L1_CACHE_BYTES <128 -return min_t (u16, max_sq_wqebbs,MLX5_SEND_WQE_MAX_WQEBBS -1 ); -#else -return min_t (u16, max_sq_wqebbs,MLX5_SEND_WQE_MAX_WQEBBS -2 ); +u8 wqebbs =min_t (u8, max_sq_wqebbs,MLX5_SEND_WQE_MAX_WQEBBS -1 ); + +#if L1_CACHE_BYTES >=128 + wqebbs =ALIGN_DOWN (wqebbs,2 );#endif +return wqebbs; }struct mlx5e_tx_wqe {
@@ -455,7 +456,7 @@ struct mlx5e_txqsq {struct netdev_queue *txq;u32 sqn;u16 stop_room; -u16 max_sq_mpw_wqebbs; +u8 max_sq_mpw_wqebbs;u8 min_inline_mode;struct device *pdev;__be32 mkey_be;
@@ -570,7 +571,7 @@ struct mlx5e_xdpsq {struct device *pdev;__be32 mkey_be;u16 stop_room; -u16 max_sq_mpw_wqebbs; +u8 max_sq_mpw_wqebbs;u8 min_inline_mode;unsigned long state;unsigned int hw_mtu;
Signature · 1 line
2.37.1
PATCH 6/9 net/mlx5e: Modify slow path rules to go to slow fdb
In reply to Saeed MahameedFrom: Vlad Buslov <[email protected]>
While extending available range of supported chains/prios referenced commit also modified slow path rules to go to FT chain instead of actual slow FDB. However neither of existing users of the MLX5_ATTR_FLAG_SLOW_PATH flag (tunnel encap entries with invalid encap and flows with trap action) need to match on FT chain. After bridge offload was implemented packets of such flows can also be matched by bridge priority tables which is undesirable. Restore slow path flows implementation to redirect packets to slow_fdb.
--- .../mellanox/mlx5/core/eswitch_offloads.c | 23 ++++++++++++++----- 1 file changed, 17 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +17 -6
@@ -230,10 +230,8 @@ esw_setup_ft_dest(struct mlx5_flow_destination *dest, }static void -esw_setup_slow_path_dest (struct mlx5_flow_destination *dest, -struct mlx5_flow_act *flow_act, -struct mlx5_fs_chains *chains, -int i) +esw_setup_accept_dest (struct mlx5_flow_destination *dest,struct mlx5_flow_act *flow_act, +struct mlx5_fs_chains *chains,int i) {if (mlx5_chains_ignore_flow_level_supported (chains)) flow_act->flags |=FLOW_ACT_IGNORE_FLOW_LEVEL ;
@@ -241,6 +239,16 @@ esw_setup_slow_path_dest(struct mlx5_flow_destination *dest, dest[i].ft =mlx5_chains_get_tc_end_ft (chains); } +static void +esw_setup_slow_path_dest (struct mlx5_flow_destination *dest,struct mlx5_flow_act *flow_act, +struct mlx5_eswitch *esw,int i) +{ +if (MLX5_CAP_ESW_FLOWTABLE_FDB (esw->dev, ignore_flow_level)) + flow_act->flags |=FLOW_ACT_IGNORE_FLOW_LEVEL ; + dest[i].type =MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE ; + dest[i].ft = esw->fdb_table.offloads.slow_fdb; +} + static int esw_setup_chain_dest(struct mlx5_flow_destination *dest, struct mlx5_flow_act *flow_act,
@@ -475,8 +483,11 @@ esw_setup_dests(struct mlx5_flow_destination *dest, }else if (attr->dest_ft) {esw_setup_ft_dest (dest, flow_act, esw, attr, spec, *i); (*i)++; - }else if (mlx5e_tc_attr_flags_skip (attr->flags)) { -esw_setup_slow_path_dest (dest, flow_act, chains, *i); + }else if (attr->flags &MLX5_ATTR_FLAG_SLOW_PATH ) { +esw_setup_slow_path_dest (dest, flow_act, esw, *i); + (*i)++; + }else if (attr->flags &MLX5_ATTR_FLAG_ACCEPT ) { +esw_setup_accept_dest (dest, flow_act, chains, *i); (*i)++; }else if (attr->dest_chain) { err = esw_setup_chain_dest(dest, flow_act, chains, attr->dest_chain,
Signature · 1 line
2.37.1
PATCH 8/9 net/mlx5: DR, Fix SMFS steering info dump format
In reply to Saeed MahameedFrom: Yevgeny Kliteynik <[email protected]>
Fix several issues in SMFS steering info dump:
- Fix outdated macro value for matcher mask in the SMFS debug dump format. The existing value denotes the old format of the matcher mask, as it was used during the early stages of development, and it results in wrong parsing by the steering dump parser - wrong fields are shown in the parsed output.
- Add the missing destination table to the dumped action.
The missing dest table handle breaks the ability to associate between the "go to table" action and the actual table in the steering info.
--- .../ethernet/mellanox/mlx5/core/steering/dr_dbg.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c +8 -5
@@ -21,10 +21,11 @@ enum dr_dump_rec_type {DR_DUMP_REC_TYPE_TABLE_TX =3102 ,DR_DUMP_REC_TYPE_MATCHER =3200 , -DR_DUMP_REC_TYPE_MATCHER_MASK =3201 , +DR_DUMP_REC_TYPE_MATCHER_MASK_DEPRECATED =3201 ,DR_DUMP_REC_TYPE_MATCHER_RX =3202 ,DR_DUMP_REC_TYPE_MATCHER_TX =3203 ,DR_DUMP_REC_TYPE_MATCHER_BUILDER =3204 , +DR_DUMP_REC_TYPE_MATCHER_MASK =3205 ,DR_DUMP_REC_TYPE_RULE =3300 , DR_DUMP_REC_TYPE_RULE_RX_ENTRY_V0 = 3301,
@@ -114,13 +115,15 @@ dr_dump_rule_action_mem(struct seq_file *file, const u64 rule_id,break ;case DR_ACTION_TYP_FT :if (action->dest_tbl->is_fw_tbl) -seq_printf (file,"%d,0x%llx,0x%llx,0x%x\n" , +seq_printf (file,"%d,0x%llx,0x%llx,0x%x,0x%x\n" ,DR_DUMP_REC_TYPE_ACTION_FT , action_id, - rule_id, action->dest_tbl->fw_tbl.id); + rule_id, action->dest_tbl->fw_tbl.id, +-1 );else -seq_printf (file,"%d,0x%llx,0x%llx,0x%x\n" , +seq_printf (file,"%d,0x%llx,0x%llx,0x%x,0x%llx\n" ,DR_DUMP_REC_TYPE_ACTION_FT , action_id, - rule_id, action->dest_tbl->tbl->table_id); + rule_id, action->dest_tbl->tbl->table_id, +DR_DBG_PTR_TO_ID (action->dest_tbl->tbl));break ;case DR_ACTION_TYP_CTR :
Signature · 1 line
2.37.1
PATCH 7/9 net/mlx5: Adjust log_max_qp to be 18 at most
In reply to Saeed MahameedFrom: Maher Sanalla <[email protected]>
The cited commit limited log_max_qp to be 17 due to FW capabilities. Recently, it turned out that there are old FW versions that supported more than 17, so the cited commit caused a degradation.
Thus, set the maximum log_max_qp back to 18 as it was before the cited commit.
--- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +1 -1
@@ -524,7 +524,7 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)/* Check log_max_qp from HCA caps to set in current profile */ if (prof->log_max_qp ==LOG_MAX_SUPPORTED_QPS ) { - prof->log_max_qp =min_t (u8,17 ,MLX5_CAP_GEN_MAX (dev, log_max_qp)); + prof->log_max_qp =min_t (u8,18 ,MLX5_CAP_GEN_MAX (dev, log_max_qp)); }else if (MLX5_CAP_GEN_MAX (dev, log_max_qp) < prof->log_max_qp) { mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n", prof->log_max_qp,
Signature · 1 line
2.37.1
PATCH 9/9 net/mlx5: Fix driver use of uninitialized timeout
In reply to Saeed MahameedFrom: Shay Drory <[email protected]>
Currently, driver is setting default values to all timeouts during
function setup. The offending commit is using a timeout before
function setup, meaning: the timeout is 0 (or garbage), since no
value have been set.
This may result in failure to probe the driver:
mlx5_function_setup:1034:(pid 69850): Firmware over 4294967296 MS in pre-initializing state, aborting probe_one:1591:(pid 69850): mlx5_init_one failed with error code -16
Hence, set default values to timeouts during tout_init()
--- drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 11 ++++------- drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h | 1 - drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 -- 3 files changed, 4 insertions(+), 10 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c +4 -7
@@ -32,20 +32,17 @@ static void tout_set(struct mlx5_core_dev *dev, u64 val, enum mlx5_timeouts_type dev->timeouts->to[type] = val; } -void mlx5_tout_set_def_val (struct mlx5_core_dev *dev) +int mlx5_tout_init (struct mlx5_core_dev *dev) {int i; -for (i =0 ; i <MAX_TIMEOUT_TYPES ; i++) -tout_set (dev, tout_def_sw_val[i], i); -} - -int mlx5_tout_init (struct mlx5_core_dev *dev) -{ dev->timeouts =kmalloc (sizeof (*dev->timeouts),GFP_KERNEL );if (!dev->timeouts)return -ENOMEM ; +for (i =0 ; i <MAX_TIMEOUT_TYPES ; i++) +tout_set (dev, tout_def_sw_val[i], i); +return 0 ; }
drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h +0 -1
@@ -35,7 +35,6 @@ int mlx5_tout_init(struct mlx5_core_dev *dev);void mlx5_tout_cleanup (struct mlx5_core_dev *dev);void mlx5_tout_query_iseg (struct mlx5_core_dev *dev);int mlx5_tout_query_dtor (struct mlx5_core_dev *dev); -void mlx5_tout_set_def_val (struct mlx5_core_dev *dev);u64 _mlx5_tout_ms (struct mlx5_core_dev *dev,enum mlx5_timeouts_types type);#define mlx5_tout_ms (dev, type) _mlx5_tout_ms(dev, MLX5_TO_##type##_MS)
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -2
@@ -1023,8 +1023,6 @@ static int mlx5_function_setup(struct mlx5_core_dev *dev, u64 timeout)if (mlx5_core_is_pf (dev))pcie_print_link_status (dev->pdev); -mlx5_tout_set_def_val (dev); -/* wait for firmware to accept initialization segments configurations */ err = wait_fw_init(dev, timeout,
Signature · 1 line
2.37.1
Re: [net 1/9] net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
In reply to Saeed MahameedThis series was applied to netdev/net.git (master) by Saeed Mahameed <[email protected]>:
Hello:
This series was applied to netdev/net.git (master) by Saeed Mahameed <[email protected]>:
Quoted 10 lines · On Thu, 28 Jul 2022 13:46:32 -0700 you wrote:
From: Gal Pressman <[email protected]>
The driver reports whether TX/RX TLS device offloads are supported, but not which ciphers/versions, these should be handled by returning
-EOPNOTSUPPwhen .tls_dev_add() is called.Remove the
WARN_ONkernel trace when the driver gets a request to offload a cipher/version that is not supported as it is expected.[...]
Here is the summary with links:
- [net,1/9] net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
https://git.kernel.org/netdev/net/c/115d9f95ea7a - [net,2/9] net/mlx5e: TC, Fix post_act to not match on in_port metadata https://git.kernel.org/netdev/net/c/903f2194f74b - [net,3/9] net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS https://git.kernel.org/netdev/net/c/562696c3c62c - [net,4/9] net/mlx5e: xsk: Account for XSK RQ UMRs when calculating ICOSQ size https://git.kernel.org/netdev/net/c/52586d2f56b3 - [net,5/9] net/mlx5e: Fix calculations related to max MPWQE size https://git.kernel.org/netdev/net/c/677e78c8d44f - [net,6/9] net/mlx5e: Modify slow path rules to go to slow fdb https://git.kernel.org/netdev/net/c/c0063a43700f - [net,7/9] net/mlx5: Adjust log_max_qp to be 18 at most https://git.kernel.org/netdev/net/c/a6e9085d791f - [net,8/9] net/mlx5: DR, Fix SMFS steering info dump format https://git.kernel.org/netdev/net/c/62d2664351ef - [net,9/9] net/mlx5: Fix driver use of uninitialized timeout https://git.kernel.org/netdev/net/c/42b4f7f66a43
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html