Skip to contentSkip to conversation

Makefile: Reduce usage of custom mpc85xx u-boot.bin target

PATCH New Pali Rohár 1 participant 1 message Aug 3, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Makefile: Reduce usage of custom mpc85xx u-boot.bin target

Building of final u-boot.bin binary for mpc85xx via binman is needed only when inserting DTB binary in the middle of the u-boot ELF binary (before .bootpg and .resetvec ELF sections).

These requirements are met when CONFIG_MPC85XX_HAVE_RESET_VECTOR is enabled (= generating .bootpg/.resetvec sections) and CONFIG_OF_SEPARATE is enabled (= inserting DTB binary).

So in all other cases use standard build procedure instead of custom mpc85xx u-boot.bin Makefile target via binman.

---
This patch depends on patch series:
https://patchwork.ozlabs.org/project/uboot/list/?series=312130

---
 Makefile                     | 11 ++++-------
 arch/powerpc/Kconfig         |  2 +-
 arch/powerpc/dts/u-boot.dtsi |  8 ++++----
 3 files changed, 9 insertions(+), 12 deletions(-)
Makefile +4 -7
index b1b08695cc47..d659c8118cba 100644
@@ -1214,12 +1214,12 @@ else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
 u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
 	$(call if_changed,cat)
 
-ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
 u-boot.bin: u-boot-dtb.bin FORCE
 	$(call if_changed,copy)
 endif
 
-else ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+else ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
 u-boot.bin: u-boot-nodtb.bin FORCE
 	$(call if_changed,copy)
 endif
@@ -1622,17 +1622,14 @@ u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
 
 endif
 
-ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-u-boot.bin: u-boot-nodtb.bin u-boot.dtb \
-	$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
 	$(call if_changed,binman)
 
-ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
 OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
 u-boot-br.bin: u-boot FORCE
 	$(call if_changed,objcopy)
 endif
-endif
 
 quiet_cmd_ldr = LD      $@
 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
arch/powerpc/Kconfig +1 -1
index 737bdd8edb41..e0e2662f4c84 100644
@@ -20,7 +20,7 @@ config MPC85xx
 	select CREATE_ARCH_SYMLINK
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
-	select BINMAN if OF_SEPARATE
+	select BINMAN if MPC85XX_HAVE_RESET_VECTOR && OF_SEPARATE
 	imply CMD_HASH
 	imply CMD_IRQ
 	imply USB_EHCI_HCD if USB
arch/powerpc/dts/u-boot.dtsi +4 -4
index 0251afddca82..6588bb7fa5e2 100644
@@ -5,6 +5,8 @@
 
 #include <config.h>
 
+#if defined(CONFIG_MPC85XX_HAVE_RESET_VECTOR) && defined(CONFIG_OF_SEPARATE)
+
 / {
 	binman {
 		filename = "u-boot.bin";
@@ -19,17 +21,15 @@
 		};
 
 		u-boot-dtb-with-ucode {
-#ifdef CONFIG_MPC85xx
 			align = <4>;
-#endif
 		};
-#ifdef CONFIG_MPC85XX_HAVE_RESET_VECTOR
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 		powerpc-mpc85xx-bootpg-resetvec {
 			offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
 		};
-#endif
 	};
 };
+
+#endif
Signature · 1 line
2.20.1