OpenSBI Kconfig Support

---
 scripts/Kconfiglib/LICENSE.txt      |    5 +
 scripts/Kconfiglib/allnoconfig.py   |   45 +
 scripts/Kconfiglib/allyesconfig.py  |   56 +
 scripts/Kconfiglib/defconfig.py     |   43 +
 scripts/Kconfiglib/genconfig.py     |  154 +
 scripts/Kconfiglib/kconfiglib.py    | 7160 +++++++++++++++++++++++++++
 scripts/Kconfiglib/menuconfig.py    | 3278 ++++++++++++
 scripts/Kconfiglib/oldconfig.py     |  246 +
 scripts/Kconfiglib/olddefconfig.py  |   28 +
 scripts/Kconfiglib/savedefconfig.py |   49 +
 scripts/Kconfiglib/setconfig.py     |   92 +
 11 files changed, 11156 insertions(+)
 create mode 100644 scripts/Kconfiglib/LICENSE.txt
 create mode 100755 scripts/Kconfiglib/allnoconfig.py
 create mode 100755 scripts/Kconfiglib/allyesconfig.py
 create mode 100755 scripts/Kconfiglib/defconfig.py
 create mode 100755 scripts/Kconfiglib/genconfig.py
 create mode 100644 scripts/Kconfiglib/kconfiglib.py
 create mode 100755 scripts/Kconfiglib/menuconfig.py
 create mode 100755 scripts/Kconfiglib/oldconfig.py
 create mode 100755 scripts/Kconfiglib/olddefconfig.py
 create mode 100755 scripts/Kconfiglib/savedefconfig.py
 create mode 100755 scripts/Kconfiglib/setconfig.py

scripts/Kconfiglib/LICENSE.txt new file +5 -0

new file mode 100644
index 0000000..8b31efc
@@ -0,0 +1,5 @@
+Copyright (c) 2011-2019, Ulf Magnusson <[email protected]>
+
+Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

scripts/Kconfiglib/allnoconfig.py new file +45 -0

45 lines not on this page · raw message

scripts/Kconfiglib/allyesconfig.py new file +56 -0

56 lines not on this page · raw message

scripts/Kconfiglib/defconfig.py new file +43 -0

43 lines not on this page · raw message

scripts/Kconfiglib/genconfig.py new file +154 -0

154 lines not on this page · raw message

scripts/Kconfiglib/kconfiglib.py new file +7160 -0

2,697 lines not on this page · raw message

scripts/Kconfiglib/menuconfig.py new file +3278 -0

3,278 lines not on this page · raw message

scripts/Kconfiglib/oldconfig.py new file +246 -0

246 lines not on this page · raw message

scripts/Kconfiglib/olddefconfig.py new file +28 -0

new file mode 100755
index 0000000..2dadfb4

Lines of this file are not shown. View the raw message.

scripts/Kconfiglib/savedefconfig.py new file +49 -0

49 lines not on this page · raw message

scripts/Kconfiglib/setconfig.py new file +92 -0

92 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line

2.34.1

Part of the diff is not shown here. View the raw message.

Anup Patel

author

2022-08-08 03:57 UTC #2 lore raw

PATCH v8 2/17 Makefile: Add initial kconfig support for each platform

We extend the top-level makefile to allow kconfig based configuration for each platform where each platform has it's own set of configs with "defconfig" being the default config.

Signed-off-by Anup Patel <[email protected]>

---
 Kconfig                                   | 23 ++++++++
 Makefile                                  | 72 +++++++++++++++++++----
 firmware/Kconfig                          |  1 +
 lib/utils/Kconfig                         |  1 +
 platform/andes/ae350/Kconfig              |  5 ++
 platform/andes/ae350/configs/defconfig    |  0
 platform/fpga/ariane/Kconfig              |  5 ++
 platform/fpga/ariane/configs/defconfig    |  0
 platform/fpga/openpiton/Kconfig           |  5 ++
 platform/fpga/openpiton/configs/defconfig |  0
 platform/generic/Kconfig                  |  5 ++
 platform/generic/configs/defconfig        |  0
 platform/kendryte/k210/Kconfig            |  5 ++
 platform/kendryte/k210/configs/defconfig  |  0
 platform/nuclei/ux600/Kconfig             |  5 ++
 platform/nuclei/ux600/configs/defconfig   |  0
 platform/template/Kconfig                 | 12 ++++
 platform/template/configs/defconfig       |  0
 18 files changed, 127 insertions(+), 12 deletions(-)
 create mode 100644 Kconfig
 create mode 100644 firmware/Kconfig
 create mode 100644 lib/utils/Kconfig
 create mode 100644 platform/andes/ae350/Kconfig
 create mode 100644 platform/andes/ae350/configs/defconfig
 create mode 100644 platform/fpga/ariane/Kconfig
 create mode 100644 platform/fpga/ariane/configs/defconfig
 create mode 100644 platform/fpga/openpiton/Kconfig
 create mode 100644 platform/fpga/openpiton/configs/defconfig
 create mode 100644 platform/generic/Kconfig
 create mode 100644 platform/generic/configs/defconfig
 create mode 100644 platform/kendryte/k210/Kconfig
 create mode 100644 platform/kendryte/k210/configs/defconfig
 create mode 100644 platform/nuclei/ux600/Kconfig
 create mode 100644 platform/nuclei/ux600/configs/defconfig
 create mode 100644 platform/template/Kconfig
 create mode 100644 platform/template/configs/defconfig

Kconfig new file +23 -0

new file mode 100644
index 0000000..b3213a9
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+mainmenu "OpenSBI $(OPENSBI_PLATFORM) Configuration"
+
+config OPENSBI_SRC_DIR
+	string
+	option env="OPENSBI_SRC_DIR"
+
+config OPENSBI_PLATFORM
+	string
+	option env="OPENSBI_PLATFORM"
+
+config OPENSBI_PLATFORM_SRC_DIR
+	string
+	option env="OPENSBI_PLATFORM_SRC_DIR"
+
+menu "Platform Options"
+source "$(OPENSBI_PLATFORM_SRC_DIR)/Kconfig"
+endmenu
+
+source "$(OPENSBI_SRC_DIR)/lib/utils/Kconfig"
+
+source "$(OPENSBI_SRC_DIR)/firmware/Kconfig"

Makefile +60 ~~-12~~

145 lines not on this page · raw message

firmware/Kconfig new file +1 -0

new file mode 100644
index 0000000..d6e0506
@@ -0,0 +1 @@
+# SPDX-License-Identifier: BSD-2-Clause

lib/utils/Kconfig new file +1 -0

new file mode 100644
index 0000000..d6e0506
@@ -0,0 +1 @@
+# SPDX-License-Identifier: BSD-2-Clause

platform/andes/ae350/Kconfig new file +5 -0

new file mode 100644
index 0000000..4b73c76
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_ANDES_AE350
+	bool
+	default y

platform/andes/ae350/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/fpga/ariane/Kconfig new file +5 -0

new file mode 100644
index 0000000..70d2004
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_ARIANE_FPGA
+	bool
+	default y

platform/fpga/ariane/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/fpga/openpiton/Kconfig new file +5 -0

new file mode 100644
index 0000000..81e4b76
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_OPENPITON_FPGA
+	bool
+	default y

platform/fpga/openpiton/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/generic/Kconfig new file +5 -0

new file mode 100644
index 0000000..3eab282
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_GENERIC
+	bool
+	default y

platform/generic/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/kendryte/k210/Kconfig new file +5 -0

new file mode 100644
index 0000000..889f16b
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_KENDRYTE_K210
+	bool
+	default y

platform/kendryte/k210/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/nuclei/ux600/Kconfig new file +5 -0

new file mode 100644
index 0000000..c368ef4
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+config PLATFORM_NUCLEI_UX600
+	bool
+	default y

platform/nuclei/ux600/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

platform/template/Kconfig new file +12 -0

new file mode 100644
index 0000000..6fbb567
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+#
+# All mandatory drivers or libraries for this platform should
+# be directly selected by the PLATFORM_xyz kconfig symbol.
+#
+# All optional drivers or libraries for this platform should
+# be enabled via configs/defconfig of this platform.
+#
+config PLATFORM_TEMPLATE
+	bool
+	default y

platform/template/configs/defconfig new file +0 -0

new file mode 100644
index 0000000..e69de29

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #3 lore raw

PATCH v8 3/17 Makefile: Compile lib/utils sources separately for each platform

Currently, if same build directory is used to compile two different platforms then lib/utils objects are shared for these platforms.

We will be having platform specific configs to enable/disable drivers in lib/utils and select compile time options for lib/utils sources. This means lib/utils sources will now be compiled in a platform specific way.

To tackle above, we update top-level Makefile as follows:
1) Don't create libsbiutils.a anymore because this can't be shared between platforms.
2) Compile lib/utils sources separately for each platform.
3) Add comments showing which make rules are for lib/sbi, lib/utils, firmware, and platform sources.

Signed-off-by Anup Patel <[email protected]>

---
 Makefile                         | 48 ++++++++++++++++----------------
 docs/library_usage.md            |  6 +---
 scripts/create-binary-archive.sh |  2 +-
 3 files changed, 26 insertions(+), 30 deletions(-)

Makefile +24 ~~-24~~

index c5a3467..011c7a4 100644
@@ -243,8 +243,8 @@ include $(firmware-object-mks)
 
 # Setup list of objects
 libsbi-objs-path-y=$(foreach obj,$(libsbi-objs-y),$(build_dir)/lib/sbi/$(obj))
-libsbiutils-objs-path-y=$(foreach obj,$(libsbiutils-objs-y),$(build_dir)/lib/utils/$(obj))
 ifdef PLATFORM
+libsbiutils-objs-path-y=$(foreach obj,$(libsbiutils-objs-y),$(platform_build_dir)/lib/utils/$(obj))
 platform-objs-path-y=$(foreach obj,$(platform-objs-y),$(platform_build_dir)/$(obj))
 firmware-bins-path-y=$(foreach bin,$(firmware-bins-y),$(platform_build_dir)/firmware/$(bin))
 endif

@@ -461,7 +461,6 @@ compile_gen_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo "$(1:.dep=$(2)): $(3)" >> $(1)
 
 targets-y  = $(build_dir)/lib/libsbi.a
-targets-y  += $(build_dir)/lib/libsbiutils.a
 ifdef PLATFORM
 targets-y += $(platform_build_dir)/lib/libplatsbi.a
 endif

@@ -474,12 +473,10 @@ all: $(targets-y)
 # Preserve all intermediate files
 .SECONDARY:
 
+# Rules for lib/sbi sources
 $(build_dir)/lib/libsbi.a: $(libsbi-objs-path-y)
 	$(call compile_ar,$@,$^)
 
-$(build_dir)/lib/libsbiutils.a: $(libsbi-objs-path-y) $(libsbiutils-objs-path-y)
-	$(call compile_ar,$@,$^)
-
 $(platform_build_dir)/lib/libplatsbi.a: $(libsbi-objs-path-y) $(libsbiutils-objs-path-y) $(platform-objs-path-y)
 	$(call compile_ar,$@,$^)

@@ -503,22 +500,14 @@ $(build_dir)/%.dep: $(src_dir)/%.S $(KCONFIG_CONFIG)
 $(build_dir)/%.o: $(src_dir)/%.S
 	$(call compile_as,$@,$<)
 
-$(build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_CONFIG)
+# Rules for platform sources
+$(platform_build_dir)/%.dep: $(platform_src_dir)/%.carray $(KCONFIG_CONFIG)
 	$(call compile_gen_dep,$@,.c,$< $(KCONFIG_CONFIG))
 	$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
 
-$(build_dir)/%.c: $(src_dir)/%.carray
+$(platform_build_dir)/%.c: $(platform_src_dir)/%.carray
 	$(call compile_carray,$@,$<)
 
-$(platform_build_dir)/%.bin: $(platform_build_dir)/%.elf
-	$(call compile_objcopy,$@,$<)
-
-$(platform_build_dir)/%.elf: $(platform_build_dir)/%.o $(platform_build_dir)/%.elf.ld $(platform_build_dir)/lib/libplatsbi.a
-	$(call compile_elf,$@,[email protected],$< $(platform_build_dir)/lib/libplatsbi.a)
-
-$(platform_build_dir)/%.ld: $(src_dir)/%.ldS
-	$(call compile_cpp,$@,$<)
-
 $(platform_build_dir)/%.dep: $(platform_src_dir)/%.c $(KCONFIG_CONFIG)
 	$(call compile_cc_dep,$@,$<)

@@ -542,6 +531,23 @@ $(platform_build_dir)/%.c: $(platform_build_dir)/%.dtb
 $(platform_build_dir)/%.dtb: $(platform_src_dir)/%.dts
 	$(call compile_dts,$@,$<)
 
+# Rules for lib/utils and firmware sources
+$(platform_build_dir)/%.bin: $(platform_build_dir)/%.elf
+	$(call compile_objcopy,$@,$<)
+
+$(platform_build_dir)/%.elf: $(platform_build_dir)/%.o $(platform_build_dir)/%.elf.ld $(platform_build_dir)/lib/libplatsbi.a
+	$(call compile_elf,$@,[email protected],$< $(platform_build_dir)/lib/libplatsbi.a)
+
+$(platform_build_dir)/%.ld: $(src_dir)/%.ldS
+	$(call compile_cpp,$@,$<)
+
+$(platform_build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_CONFIG)
+	$(call compile_gen_dep,$@,.c,$< $(KCONFIG_CONFIG))
+	$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
+
+$(platform_build_dir)/%.c: $(src_dir)/%.carray
+	$(call compile_carray,$@,$<)
+
 $(platform_build_dir)/%.dep: $(src_dir)/%.c $(KCONFIG_CONFIG)
 	$(call compile_cc_dep,$@,$<)

@@ -592,7 +598,6 @@ endif
 endif
 
 install_targets-y  = install_libsbi
-install_targets-y  += install_libsbiutils
 ifdef PLATFORM
 install_targets-y += install_libplatsbi
 install_targets-y += install_firmwares

@@ -607,17 +612,12 @@ install_libsbi: $(build_dir)/lib/libsbi.a
 	$(call inst_header_dir,$(install_root_dir)/$(install_include_path),$(include_dir)/sbi)
 	$(call inst_file,$(install_root_dir)/$(install_lib_path)/libsbi.a,$(build_dir)/lib/libsbi.a)
 
-.PHONY: install_libsbiutils
-install_libsbiutils: $(build_dir)/lib/libsbiutils.a
-	$(call inst_header_dir,$(install_root_dir)/$(install_include_path),$(include_dir)/sbi_utils)
-	$(call inst_file,$(install_root_dir)/$(install_lib_path)/libsbiutils.a,$(build_dir)/lib/libsbiutils.a)
-
 .PHONY: install_libplatsbi
-install_libplatsbi: $(platform_build_dir)/lib/libplatsbi.a $(build_dir)/lib/libsbi.a $(build_dir)/lib/libsbiutils.a
+install_libplatsbi: $(platform_build_dir)/lib/libplatsbi.a $(build_dir)/lib/libsbi.a
 	$(call inst_file,$(install_root_dir)/$(install_lib_path)/opensbi/$(platform_subdir)/lib/libplatsbi.a,$(platform_build_dir)/lib/libplatsbi.a)
 
 .PHONY: install_firmwares
-install_firmwares: $(platform_build_dir)/lib/libplatsbi.a $(build_dir)/lib/libsbi.a $(build_dir)/lib/libsbiutils.a $(firmware-bins-path-y)
+install_firmwares: $(platform_build_dir)/lib/libplatsbi.a $(build_dir)/lib/libsbi.a $(firmware-bins-path-y)
 	$(call inst_file_list,$(install_root_dir),$(build_dir),$(install_firmware_path)/$(platform_subdir)/firmware,$(firmware-elfs-path-y))
 	$(call inst_file_list,$(install_root_dir),$(build_dir),$(install_firmware_path)/$(platform_subdir)/firmware,$(firmware-bins-path-y))

docs/library_usage.md +1 -5

index ff99801..d5d2ba9 100644
@@ -8,11 +8,7 @@ OpenSBI provides two types of static libraries:
    hooks for the execution of this interface must be provided by the firmware or
    bootloader linking with this library. This library is installed as
    *<install_directory>/lib/libsbi.a*
-2. *libsbiutils.a* - A static library that will contain all common code required
-   by any platform supported in OpenSBI. It will be built by default and included
-   in libplatsbi.a. This library is installed as
-   *<install_directory>/lib/libsbiutils.a*.
-3. *libplatsbi.a* - An example platform-specific static library integrating
+2. *libplatsbi.a* - An example platform-specific static library integrating
    *libsbi.a* with platform-specific hooks. This library is available only for
    the platforms supported by OpenSBI. This library is installed as
    *<install_directory>/platform/<platform_subdir>/lib/libplatsbi.a*

scripts/create-binary-archive.sh +1 -1

index 43c5452..261a45a 100755
@@ -118,7 +118,7 @@ build_opensbi() {
 	# Build and install generic library
 	echo "Build and install generic library XLEN=${BUILD_RISCV_XLEN}"
 	echo ""
-	make -C "${BUILD_OPENSBI_SOURCE_PATH}" O="${BUILD_OUTPUT_PATH}/${BUILD_NAME}" I="${BUILD_OUTPUT_PATH}/${BUILD_ARCHIVE_NAME}" PLATFORM_RISCV_XLEN="${BUILD_RISCV_XLEN}" install_libsbi install_libsbiutils -j "${BUILD_NUM_THREADS}"
+	make -C "${BUILD_OPENSBI_SOURCE_PATH}" O="${BUILD_OUTPUT_PATH}/${BUILD_NAME}" I="${BUILD_OUTPUT_PATH}/${BUILD_ARCHIVE_NAME}" PLATFORM_RISCV_XLEN="${BUILD_RISCV_XLEN}" install_libsbi -j "${BUILD_NUM_THREADS}"
 	echo ""
 
 	# Build and install relevant platforms

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #4 lore raw

PATCH v8 4/17 lib: utils/serial: Use kconfig for enabling/disabling drivers

We update serial drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate serial drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/serial/fdt_serial.h |  8 +++
 lib/utils/Kconfig                     |  6 +++
 lib/utils/serial/Kconfig              | 71 +++++++++++++++++++++++++++
 lib/utils/serial/objects.mk           | 44 ++++++++---------
 platform/andes/ae350/Kconfig          |  1 +
 platform/fpga/ariane/Kconfig          |  1 +
 platform/fpga/openpiton/Kconfig       |  1 +
 platform/generic/configs/defconfig    |  8 +++
 platform/kendryte/k210/Kconfig        |  1 +
 platform/nuclei/ux600/Kconfig         |  1 +
 platform/template/Kconfig             |  1 +
 11 files changed, 121 insertions(+), 22 deletions(-)
 create mode 100644 lib/utils/serial/Kconfig

include/sbi_utils/serial/fdt_serial.h +8 -0

index 6451c23..daa2e4f 100644
@@ -12,6 +12,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_SERIAL
+
 struct fdt_serial {
 	const struct fdt_match *match_table;
 	int (*init)(void *fdt, int nodeoff, const struct fdt_match *match);

@@ -19,4 +21,10 @@ struct fdt_serial {
 
 int fdt_serial_init(void);
 
+#else
+
+static inline int fdt_serial_init(void) { return 0; }
+
+#endif
+
 #endif

lib/utils/Kconfig +6 -0

index d6e0506..4524a3f 100644
@@ -1 +1,7 @@
 # SPDX-License-Identifier: BSD-2-Clause
+
+menu "Utils and Drivers Support"
+
+source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"
+
+endmenu

lib/utils/serial/Kconfig new file +71 -0

71 lines not on this page · raw message

lib/utils/serial/objects.mk +22 ~~-22~~

55 lines not on this page · raw message

platform/andes/ae350/Kconfig +1 -0

index 4b73c76..162d19c 100644
@@ -2,4 +2,5 @@
 
 config PLATFORM_ANDES_AE350
 	bool
+	select SERIAL_UART8250
 	default y

platform/fpga/ariane/Kconfig +1 -0

index 70d2004..3ce0ec1 100644
@@ -2,4 +2,5 @@
 
 config PLATFORM_ARIANE_FPGA
 	bool
+	select SERIAL_UART8250
 	default y

platform/fpga/openpiton/Kconfig +1 -0

index 81e4b76..4dd752d 100644
@@ -2,4 +2,5 @@
 
 config PLATFORM_OPENPITON_FPGA
 	bool
+	select SERIAL_UART8250
 	default y

platform/generic/configs/defconfig +8 -0

index e69de29..ce70c59 100644
@@ -0,0 +1,8 @@
+CONFIG_FDT_SERIAL=y
+CONFIG_FDT_SERIAL_GAISLER=y
+CONFIG_FDT_SERIAL_HTIF=y
+CONFIG_FDT_SERIAL_SHAKTI=y
+CONFIG_FDT_SERIAL_SIFIVE=y
+CONFIG_FDT_SERIAL_LITEX=y
+CONFIG_FDT_SERIAL_UART8250=y
+CONFIG_FDT_SERIAL_XILINX_UARTLITE=y

platform/kendryte/k210/Kconfig +1 -0

index 889f16b..adc7613 100644
@@ -2,4 +2,5 @@
 
 config PLATFORM_KENDRYTE_K210
 	bool
+	select SERIAL_SIFIVE
 	default y

platform/nuclei/ux600/Kconfig +1 -0

index c368ef4..69fe8f8 100644
@@ -2,4 +2,5 @@
 
 config PLATFORM_NUCLEI_UX600
 	bool
+	select SERIAL_SIFIVE
 	default y

platform/template/Kconfig +1 -0

index 6fbb567..f080729 100644
@@ -9,4 +9,5 @@
 #
 config PLATFORM_TEMPLATE
 	bool
+	select SERIAL_UART8250
 	default y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #5 lore raw

PATCH v8 5/17 lib: utils/reset: Use kconfig for enabling/disabling drivers

We update reset drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate reset drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/reset/fdt_reset.h | 12 +++++++++++
 lib/utils/Kconfig                   |  2 ++
 lib/utils/reset/Kconfig             | 33 +++++++++++++++++++++++++++++
 lib/utils/reset/objects.mk          | 28 ++++++++++++------------
 platform/generic/configs/defconfig  |  6 ++++++
 5 files changed, 67 insertions(+), 14 deletions(-)
 create mode 100644 lib/utils/reset/Kconfig

include/sbi_utils/reset/fdt_reset.h +12 -0

index e7f7350..ea8063b 100644
@@ -17,6 +17,8 @@ struct fdt_reset {
 	int (*init)(void *fdt, int nodeoff, const struct fdt_match *match);
 };
 
+#ifdef CONFIG_FDT_RESET
+
 /**
  * fdt_reset_driver_init() - initialize reset driver based on the device-tree
  */

@@ -29,4 +31,14 @@ int fdt_reset_driver_init(void *fdt, struct fdt_reset *drv);
  */
 void fdt_reset_init(void);
 
+#else
+
+static inline int fdt_reset_driver_init(void *fdt, struct fdt_reset *drv)
+{
+	return 0;
+}
+static inline void fdt_reset_init(void) { }
+
+#endif
+
 #endif

lib/utils/Kconfig +2 -0

index 4524a3f..f061b7a 100644
@@ -2,6 +2,8 @@
 
 menu "Utils and Drivers Support"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/reset/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"
 
 endmenu

lib/utils/reset/Kconfig new file +33 -0

new file mode 100644
index 0000000..845a1ae
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "System Reset Support"
+
+config FDT_RESET
+	bool "FDT based reset drivers"
+	default n
+
+if FDT_RESET
+
+config FDT_RESET_GPIO
+	bool "GPIO FDT reset driver"
+	default n
+
+config FDT_RESET_HTIF
+	bool "Host transfer interface (HTIF) FDT reset driver"
+	default n
+
+config FDT_RESET_SIFIVE_TEST
+	bool "SiFive Test FDT reset driver"
+	default n
+
+config FDT_RESET_SUNXI_WDT
+	bool "Sunxi WDT FDT reset driver"
+	default n
+
+config FDT_RESET_THEAD
+	bool "T-HEAD FDT reset driver"
+	default n
+
+endif
+
+endmenu

lib/utils/reset/objects.mk +14 ~~-14~~

index 8cddcdf..8a50dd0 100644
@@ -7,22 +7,22 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += reset/fdt_reset.o
-libsbiutils-objs-y += reset/fdt_reset_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_RESET) += reset/fdt_reset.o
+libsbiutils-objs-$(CONFIG_FDT_RESET) += reset/fdt_reset_drivers.o
 
-carray-fdt_reset_drivers-y += fdt_poweroff_gpio
-carray-fdt_reset_drivers-y += fdt_reset_gpio
-libsbiutils-objs-y += reset/fdt_reset_gpio.o
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_GPIO) += fdt_poweroff_gpio
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_GPIO) += fdt_reset_gpio
+libsbiutils-objs-$(CONFIG_FDT_RESET_GPIO) += reset/fdt_reset_gpio.o
 
-carray-fdt_reset_drivers-y += fdt_reset_htif
-libsbiutils-objs-y += reset/fdt_reset_htif.o
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_HTIF) += fdt_reset_htif
+libsbiutils-objs-$(CONFIG_FDT_RESET_HTIF) += reset/fdt_reset_htif.o
 
-carray-fdt_reset_drivers-y += fdt_reset_sifive_test
-libsbiutils-objs-y += reset/fdt_reset_sifive_test.o
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_SIFIVE_TEST) += fdt_reset_sifive_test
+libsbiutils-objs-$(CONFIG_FDT_RESET_SIFIVE_TEST) += reset/fdt_reset_sifive_test.o
 
-carray-fdt_reset_drivers-y += fdt_reset_sunxi_wdt
-libsbiutils-objs-y += reset/fdt_reset_sunxi_wdt.o
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_SUNXI_WDT) += fdt_reset_sunxi_wdt
+libsbiutils-objs-$(CONFIG_FDT_RESET_SUNXI_WDT) += reset/fdt_reset_sunxi_wdt.o
 
-carray-fdt_reset_drivers-y += fdt_reset_thead
-libsbiutils-objs-y += reset/fdt_reset_thead.o
-libsbiutils-objs-y += reset/fdt_reset_thead_asm.o
+carray-fdt_reset_drivers-$(CONFIG_FDT_RESET_THEAD) += fdt_reset_thead
+libsbiutils-objs-$(CONFIG_FDT_RESET_THEAD) += reset/fdt_reset_thead.o
+libsbiutils-objs-$(CONFIG_FDT_RESET_THEAD) += reset/fdt_reset_thead_asm.o

platform/generic/configs/defconfig +6 -0

index ce70c59..9778665 100644
@@ -1,3 +1,9 @@
+CONFIG_FDT_RESET=y
+CONFIG_FDT_RESET_GPIO=y
+CONFIG_FDT_RESET_HTIF=y
+CONFIG_FDT_RESET_SIFIVE_TEST=y
+CONFIG_FDT_RESET_SUNXI_WDT=y
+CONFIG_FDT_RESET_THEAD=y
 CONFIG_FDT_SERIAL=y
 CONFIG_FDT_SERIAL_GAISLER=y
 CONFIG_FDT_SERIAL_HTIF=y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #6 lore raw

PATCH v8 6/17 lib: utils/sys: Use kconfig for enabling/disabling drivers

We update system drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate system drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 lib/utils/Kconfig        |  2 ++
 lib/utils/reset/Kconfig  |  2 ++
 lib/utils/serial/Kconfig |  1 +
 lib/utils/sys/Kconfig    | 13 +++++++++++++
 lib/utils/sys/objects.mk |  4 ++--
 5 files changed, 20 insertions(+), 2 deletions(-)
 create mode 100644 lib/utils/sys/Kconfig

lib/utils/Kconfig +2 -0

index f061b7a..492f4e9 100644
@@ -6,4 +6,6 @@ source "$(OPENSBI_SRC_DIR)/lib/utils/reset/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/sys/Kconfig"
+
 endmenu

lib/utils/reset/Kconfig +2 -0

index 845a1ae..e7a71e3 100644
@@ -14,10 +14,12 @@ config FDT_RESET_GPIO
 
 config FDT_RESET_HTIF
 	bool "Host transfer interface (HTIF) FDT reset driver"
+	select SYS_HTIF
 	default n
 
 config FDT_RESET_SIFIVE_TEST
 	bool "SiFive Test FDT reset driver"
+	select SYS_SIFIVE_TEST
 	default n
 
 config FDT_RESET_SUNXI_WDT

lib/utils/serial/Kconfig +1 -0

index e114f26..bf37e34 100644
@@ -15,6 +15,7 @@ config FDT_SERIAL_GAISLER
 
 config FDT_SERIAL_HTIF
 	bool "Host transfer interface (HTIF) UART FDT driver"
+	select SYS_HTIF
 	default n
 
 config FDT_SERIAL_SHAKTI

lib/utils/sys/Kconfig new file +13 -0

new file mode 100644
index 0000000..ee85b1a
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "System Device Support"
+
+config SYS_HTIF
+	bool "Host transfere interface (HTIF) support"
+	default n
+
+config SYS_SIFIVE_TEST
+	bool "SiFive test support"
+	default n
+
+endmenu

lib/utils/sys/objects.mk +2 -2

index 06be322..9f67aee 100644
@@ -7,5 +7,5 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += sys/htif.o
-libsbiutils-objs-y += sys/sifive_test.o
+libsbiutils-objs-$(CONFIG_SYS_HTIF) += sys/htif.o
+libsbiutils-objs-$(CONFIG_SYS_SIFIVE_TEST) += sys/sifive_test.o

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #7 lore raw

PATCH v8 7/17 lib: utils/timer: Use kconfig for enabling/disabling drivers

We update timer drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate timer drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/timer/fdt_timer.h |  9 +++++++++
 lib/utils/Kconfig                   |  2 ++
 lib/utils/timer/Kconfig             | 22 ++++++++++++++++++++++
 lib/utils/timer/objects.mk          | 10 +++++-----
 platform/fpga/ariane/Kconfig        |  1 +
 platform/fpga/openpiton/Kconfig     |  1 +
 platform/generic/configs/defconfig  |  2 ++
 platform/kendryte/k210/Kconfig      |  1 +
 platform/nuclei/ux600/Kconfig       |  1 +
 platform/template/Kconfig           |  1 +
 10 files changed, 45 insertions(+), 5 deletions(-)
 create mode 100644 lib/utils/timer/Kconfig

include/sbi_utils/timer/fdt_timer.h +9 -0

index 36202a4..cf105fe 100644
@@ -12,6 +12,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_TIMER
+
 struct fdt_timer {
 	const struct fdt_match *match_table;
 	int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);

@@ -23,4 +25,11 @@ void fdt_timer_exit(void);
 
 int fdt_timer_init(bool cold_boot);
 
+#else
+
+static inline void fdt_timer_exit(void) { }
+static inline int fdt_timer_init(bool cold_boot) { return 0; }
+
+#endif
+
 #endif

lib/utils/Kconfig +2 -0

index 492f4e9..6561d0b 100644
@@ -8,4 +8,6 @@ source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/sys/Kconfig"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/timer/Kconfig"
+
 endmenu

lib/utils/timer/Kconfig new file +22 -0

new file mode 100644
index 0000000..0a1c727
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "Timer Device Support"
+
+config FDT_TIMER
+	bool "FDT based timer drivers"
+	default n
+
+if FDT_TIMER
+
+config FDT_TIMER_MTIMER
+	bool "ACLINT MTIMER FDT driver"
+	select TIMER_MTIMER
+	default n
+
+endif
+
+config TIMER_MTIMER
+	bool "ACLINT MTIMER support"
+	default n
+
+endmenu

lib/utils/timer/objects.mk +5 -5

index bc4073d..7f5f3ce 100644
@@ -7,10 +7,10 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += timer/aclint_mtimer.o
+libsbiutils-objs-$(CONFIG_TIMER_MTIMER) += timer/aclint_mtimer.o
 
-libsbiutils-objs-y += timer/fdt_timer.o
-libsbiutils-objs-y += timer/fdt_timer_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_TIMER) += timer/fdt_timer.o
+libsbiutils-objs-$(CONFIG_FDT_TIMER) += timer/fdt_timer_drivers.o
 
-carray-fdt_timer_drivers-y += fdt_timer_mtimer
-libsbiutils-objs-y += timer/fdt_timer_mtimer.o
+carray-fdt_timer_drivers-$(CONFIG_FDT_TIMER_MTIMER) += fdt_timer_mtimer
+libsbiutils-objs-$(CONFIG_FDT_TIMER_MTIMER) += timer/fdt_timer_mtimer.o

platform/fpga/ariane/Kconfig +1 -0

index 3ce0ec1..a7fd758 100644
@@ -3,4 +3,5 @@
 config PLATFORM_ARIANE_FPGA
 	bool
 	select SERIAL_UART8250
+	select TIMER_MTIMER
 	default y

platform/fpga/openpiton/Kconfig +1 -0

index 4dd752d..a7f09e4 100644
@@ -3,4 +3,5 @@
 config PLATFORM_OPENPITON_FPGA
 	bool
 	select SERIAL_UART8250
+	select TIMER_MTIMER
 	default y

platform/generic/configs/defconfig +2 -0

index 9778665..9b96a4f 100644
@@ -12,3 +12,5 @@ CONFIG_FDT_SERIAL_SIFIVE=y
 CONFIG_FDT_SERIAL_LITEX=y
 CONFIG_FDT_SERIAL_UART8250=y
 CONFIG_FDT_SERIAL_XILINX_UARTLITE=y
+CONFIG_FDT_TIMER=y
+CONFIG_FDT_TIMER_MTIMER=y

platform/kendryte/k210/Kconfig +1 -0

index adc7613..90db649 100644
@@ -3,4 +3,5 @@
 config PLATFORM_KENDRYTE_K210
 	bool
 	select SERIAL_SIFIVE
+	select TIMER_MTIMER
 	default y

platform/nuclei/ux600/Kconfig +1 -0

index 69fe8f8..dec2654 100644
@@ -3,4 +3,5 @@
 config PLATFORM_NUCLEI_UX600
 	bool
 	select SERIAL_SIFIVE
+	select TIMER_MTIMER
 	default y

platform/template/Kconfig +1 -0

index f080729..96d4b9a 100644
@@ -10,4 +10,5 @@
 config PLATFORM_TEMPLATE
 	bool
 	select SERIAL_UART8250
+	select TIMER_MTIMER
 	default y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #8 lore raw

PATCH v8 8/17 lib: utils/ipi: Use kconfig for enabling/disabling drivers

We update ipi drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate ipi drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/ipi/fdt_ipi.h    |  9 +++++++++
 lib/utils/Kconfig                  |  2 ++
 lib/utils/ipi/Kconfig              | 22 ++++++++++++++++++++++
 lib/utils/ipi/objects.mk           | 10 +++++-----
 platform/fpga/ariane/Kconfig       |  1 +
 platform/fpga/openpiton/Kconfig    |  1 +
 platform/generic/configs/defconfig |  2 ++
 platform/kendryte/k210/Kconfig     |  1 +
 platform/nuclei/ux600/Kconfig      |  1 +
 platform/template/Kconfig          |  1 +
 10 files changed, 45 insertions(+), 5 deletions(-)
 create mode 100644 lib/utils/ipi/Kconfig

include/sbi_utils/ipi/fdt_ipi.h +9 -0

index 9337353..1dd9062 100644
@@ -12,6 +12,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_IPI
+
 struct fdt_ipi {
 	const struct fdt_match *match_table;
 	int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);

@@ -23,4 +25,11 @@ void fdt_ipi_exit(void);
 
 int fdt_ipi_init(bool cold_boot);
 
+#else
+
+static inline void fdt_ipi_exit(void) { }
+static inline int fdt_ipi_init(bool cold_boot) { return 0; }
+
+#endif
+
 #endif

lib/utils/Kconfig +2 -0

index 6561d0b..50d9770 100644
@@ -2,6 +2,8 @@
 
 menu "Utils and Drivers Support"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/ipi/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/reset/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"

lib/utils/ipi/Kconfig new file +22 -0

new file mode 100644
index 0000000..c0634d3
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "IPI Device Support"
+
+config FDT_IPI
+	bool "FDT based ipi drivers"
+	default n
+
+if FDT_IPI
+
+config FDT_IPI_MSWI
+	bool "ACLINT MSWI FDT driver"
+	select IPI_MSWI
+	default n
+
+endif
+
+config IPI_MSWI
+	bool "ACLINT MSWI support"
+	default n
+
+endmenu

lib/utils/ipi/objects.mk +5 -5

index 0b0bc2d..0600cac 100644
@@ -7,10 +7,10 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += ipi/aclint_mswi.o
+libsbiutils-objs-$(CONFIG_IPI_MSWI) += ipi/aclint_mswi.o
 
-libsbiutils-objs-y += ipi/fdt_ipi.o
-libsbiutils-objs-y += ipi/fdt_ipi_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_IPI) += ipi/fdt_ipi.o
+libsbiutils-objs-$(CONFIG_FDT_IPI) += ipi/fdt_ipi_drivers.o
 
-carray-fdt_ipi_drivers-y += fdt_ipi_mswi
-libsbiutils-objs-y += ipi/fdt_ipi_mswi.o
+carray-fdt_ipi_drivers-$(CONFIG_FDT_IPI_MSWI) += fdt_ipi_mswi
+libsbiutils-objs-$(CONFIG_FDT_IPI_MSWI) += ipi/fdt_ipi_mswi.o

platform/fpga/ariane/Kconfig +1 -0

index a7fd758..0bc1597 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_ARIANE_FPGA
 	bool
+	select IPI_MSWI
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

platform/fpga/openpiton/Kconfig +1 -0

index a7f09e4..0e4e3ba 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_OPENPITON_FPGA
 	bool
+	select IPI_MSWI
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

platform/generic/configs/defconfig +2 -0

index 9b96a4f..e218c32 100644
@@ -1,3 +1,5 @@
+CONFIG_FDT_IPI=y
+CONFIG_FDT_IPI_MSWI=y
 CONFIG_FDT_RESET=y
 CONFIG_FDT_RESET_GPIO=y
 CONFIG_FDT_RESET_HTIF=y

platform/kendryte/k210/Kconfig +1 -0

index 90db649..685a5cd 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_KENDRYTE_K210
 	bool
+	select IPI_MSWI
 	select SERIAL_SIFIVE
 	select TIMER_MTIMER
 	default y

platform/nuclei/ux600/Kconfig +1 -0

index dec2654..cd995a3 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_NUCLEI_UX600
 	bool
+	select IPI_MSWI
 	select SERIAL_SIFIVE
 	select TIMER_MTIMER
 	default y

platform/template/Kconfig +1 -0

index 96d4b9a..4d9646d 100644
@@ -9,6 +9,7 @@
 #
 config PLATFORM_TEMPLATE
 	bool
+	select IPI_MSWI
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #9 lore raw

PATCH v8 9/17 lib: utils/irqchip: Use kconfig for enabling/disabling drivers

We update irqchip drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate irqchip drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/irqchip/fdt_irqchip.h | 10 +++++++
 include/sbi_utils/irqchip/imsic.h       | 10 +++++++
 lib/utils/Kconfig                       |  2 ++
 lib/utils/irqchip/Kconfig               | 40 +++++++++++++++++++++++++
 lib/utils/irqchip/objects.mk            | 22 +++++++-------
 platform/andes/ae350/Kconfig            |  1 +
 platform/fpga/ariane/Kconfig            |  1 +
 platform/fpga/openpiton/Kconfig         |  1 +
 platform/generic/configs/defconfig      |  4 +++
 platform/kendryte/k210/Kconfig          |  1 +
 platform/nuclei/ux600/Kconfig           |  1 +
 platform/template/Kconfig               |  1 +
 12 files changed, 83 insertions(+), 11 deletions(-)
 create mode 100644 lib/utils/irqchip/Kconfig

include/sbi_utils/irqchip/fdt_irqchip.h +10 -0

index 13ef6f7..63e9fd9 100644
@@ -12,6 +12,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_IRQCHIP
+
 struct fdt_irqchip {
 	const struct fdt_match *match_table;
 	int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);

@@ -23,4 +25,12 @@ void fdt_irqchip_exit(void);
 
 int fdt_irqchip_init(bool cold_boot);
 
+#else
+
+static inline void fdt_irqchip_exit(void) { }
+
+static inline int fdt_irqchip_init(bool cold_boot) { return 0; }
+
+#endif
+
 #endif

include/sbi_utils/irqchip/imsic.h +10 -0

index cffcb5a..e295771 100644
@@ -33,6 +33,8 @@ struct imsic_data {
 	struct imsic_regs regs[IMSIC_MAX_REGS];
 };
 
+#ifdef CONFIG_IRQCHIP_IMSIC
+
 int imsic_map_hartid_to_data(u32 hartid, struct imsic_data *imsic, int file);
 
 struct imsic_data *imsic_get_data(u32 hartid);

@@ -47,4 +49,12 @@ int imsic_data_check(struct imsic_data *imsic);
 
 int imsic_cold_irqchip_init(struct imsic_data *imsic);
 
+#else
+
+static inline void imsic_local_irqchip_init(void) { }
+
+static inline int imsic_data_check(struct imsic_data *imsic) { return 0; }
+
+#endif
+
 #endif

lib/utils/Kconfig +2 -0

index 50d9770..3f315fd 100644
@@ -4,6 +4,8 @@ menu "Utils and Drivers Support"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/ipi/Kconfig"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/irqchip/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/reset/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"

lib/utils/irqchip/Kconfig new file +40 -0

new file mode 100644
index 0000000..6a7e297
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "Interrupt Controller Support"
+
+config FDT_IRQCHIP
+	bool "FDT based interrupt controller drivers"
+	default n
+
+if FDT_IRQCHIP
+
+config FDT_IRQCHIP_APLIC
+	bool "Advanced Platform Level Interrupt Controller (APLIC) FDT driver"
+	select IRQCHIP_APLIC
+	default n
+
+config FDT_IRQCHIP_IMSIC
+	bool "Incoming Message Signalled Interrupt Controller (IMSIC) FDT driver"
+	select IRQCHIP_IMSIC
+	default n
+
+config FDT_IRQCHIP_PLIC
+	bool "Platform Level Interrupt Controller (PLIC) FDT driver"
+	select IRQCHIP_PLIC
+	default n
+
+endif
+
+config IRQCHIP_APLIC
+	bool "Advanced Platform Level Interrupt Controller (APLIC) support"
+	default n
+
+config IRQCHIP_IMSIC
+	bool "Incoming Message Signalled Interrupt Controller (IMSIC) support"
+	default n
+
+config IRQCHIP_PLIC
+	bool "Platform Level Interrupt Controller (PLIC) support"
+	default n
+
+endmenu

lib/utils/irqchip/objects.mk +11 ~~-11~~

index 7775bc4..e458891 100644
@@ -7,18 +7,18 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += irqchip/fdt_irqchip.o
-libsbiutils-objs-y += irqchip/fdt_irqchip_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_IRQCHIP) += irqchip/fdt_irqchip.o
+libsbiutils-objs-$(CONFIG_FDT_IRQCHIP) += irqchip/fdt_irqchip_drivers.o
 
-carray-fdt_irqchip_drivers-y += fdt_irqchip_aplic
-libsbiutils-objs-y += irqchip/fdt_irqchip_aplic.o
+carray-fdt_irqchip_drivers-$(CONFIG_FDT_IRQCHIP_APLIC) += fdt_irqchip_aplic
+libsbiutils-objs-$(CONFIG_FDT_IRQCHIP_APLIC) += irqchip/fdt_irqchip_aplic.o
 
-carray-fdt_irqchip_drivers-y += fdt_irqchip_imsic
-libsbiutils-objs-y += irqchip/fdt_irqchip_imsic.o
+carray-fdt_irqchip_drivers-$(CONFIG_FDT_IRQCHIP_IMSIC) += fdt_irqchip_imsic
+libsbiutils-objs-$(CONFIG_FDT_IRQCHIP_IMSIC) += irqchip/fdt_irqchip_imsic.o
 
-carray-fdt_irqchip_drivers-y += fdt_irqchip_plic
-libsbiutils-objs-y += irqchip/fdt_irqchip_plic.o
+carray-fdt_irqchip_drivers-$(CONFIG_FDT_IRQCHIP_PLIC) += fdt_irqchip_plic
+libsbiutils-objs-$(CONFIG_FDT_IRQCHIP_PLIC) += irqchip/fdt_irqchip_plic.o
 
-libsbiutils-objs-y += irqchip/aplic.o
-libsbiutils-objs-y += irqchip/imsic.o
-libsbiutils-objs-y += irqchip/plic.o
+libsbiutils-objs-$(CONFIG_IRQCHIP_APLIC) += irqchip/aplic.o
+libsbiutils-objs-$(CONFIG_IRQCHIP_IMSIC) += irqchip/imsic.o
+libsbiutils-objs-$(CONFIG_IRQCHIP_PLIC) += irqchip/plic.o

platform/andes/ae350/Kconfig +1 -0

index 162d19c..87deab0 100644
@@ -2,5 +2,6 @@
 
 config PLATFORM_ANDES_AE350
 	bool
+	select IRQCHIP_PLIC
 	select SERIAL_UART8250
 	default y

platform/fpga/ariane/Kconfig +1 -0

index 0bc1597..5a720d9 100644
@@ -3,6 +3,7 @@
 config PLATFORM_ARIANE_FPGA
 	bool
 	select IPI_MSWI
+	select IRQCHIP_PLIC
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

platform/fpga/openpiton/Kconfig +1 -0

index 0e4e3ba..973906e 100644
@@ -3,6 +3,7 @@
 config PLATFORM_OPENPITON_FPGA
 	bool
 	select IPI_MSWI
+	select IRQCHIP_PLIC
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

platform/generic/configs/defconfig +4 -0

index e218c32..ad66a63 100644
@@ -1,5 +1,9 @@
 CONFIG_FDT_IPI=y
 CONFIG_FDT_IPI_MSWI=y
+CONFIG_FDT_IRQCHIP=y
+CONFIG_FDT_IRQCHIP_APLIC=y
+CONFIG_FDT_IRQCHIP_IMSIC=y
+CONFIG_FDT_IRQCHIP_PLIC=y
 CONFIG_FDT_RESET=y
 CONFIG_FDT_RESET_GPIO=y
 CONFIG_FDT_RESET_HTIF=y

platform/kendryte/k210/Kconfig +1 -0

index 685a5cd..2a1daaa 100644
@@ -3,6 +3,7 @@
 config PLATFORM_KENDRYTE_K210
 	bool
 	select IPI_MSWI
+	select IRQCHIP_PLIC
 	select SERIAL_SIFIVE
 	select TIMER_MTIMER
 	default y

platform/nuclei/ux600/Kconfig +1 -0

index cd995a3..464802e 100644
@@ -3,6 +3,7 @@
 config PLATFORM_NUCLEI_UX600
 	bool
 	select IPI_MSWI
+	select IRQCHIP_PLIC
 	select SERIAL_SIFIVE
 	select TIMER_MTIMER
 	default y

platform/template/Kconfig +1 -0

index 4d9646d..d73825d 100644
@@ -10,6 +10,7 @@
 config PLATFORM_TEMPLATE
 	bool
 	select IPI_MSWI
+	select IRQCHIP_PLIC
 	select SERIAL_UART8250
 	select TIMER_MTIMER
 	default y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #10 lore raw

PATCH v8 10/17 lib: utils/i2c: Use kconfig for enabling/disabling drivers

We update i2c drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate i2c drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 lib/utils/Kconfig                  |  2 ++
 lib/utils/i2c/Kconfig              | 22 ++++++++++++++++++++++
 lib/utils/i2c/objects.mk           | 10 +++++-----
 platform/generic/configs/defconfig |  2 ++
 4 files changed, 31 insertions(+), 5 deletions(-)
 create mode 100644 lib/utils/i2c/Kconfig

lib/utils/Kconfig +2 -0

index 3f315fd..39452d5 100644
@@ -2,6 +2,8 @@
 
 menu "Utils and Drivers Support"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/i2c/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/ipi/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/irqchip/Kconfig"

lib/utils/i2c/Kconfig new file +22 -0

new file mode 100644
index 0000000..16c4453
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "I2C Support"
+
+config FDT_I2C
+	bool "FDT based I2C drivers"
+	select I2C
+	default n
+
+if FDT_I2C
+
+config FDT_I2C_SIFIVE
+	bool "SiFive I2C FDT driver"
+	default n
+
+endif
+
+config I2C
+	bool "I2C support"
+	default n
+
+endmenu

lib/utils/i2c/objects.mk +5 -5

index bb0d6d5..a0fbbb5 100644
@@ -7,10 +7,10 @@
 #   Nikita Shubin <[email protected]>
 #
 
-libsbiutils-objs-y += i2c/i2c.o
+libsbiutils-objs-$(CONFIG_I2C) += i2c/i2c.o
 
-libsbiutils-objs-y += i2c/fdt_i2c.o
-libsbiutils-objs-y += i2c/fdt_i2c_adapter_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_I2C) += i2c/fdt_i2c.o
+libsbiutils-objs-$(CONFIG_FDT_I2C) += i2c/fdt_i2c_adapter_drivers.o
 
-carray-fdt_i2c_adapter_drivers-y += fdt_i2c_adapter_sifive
-libsbiutils-objs-y += i2c/fdt_i2c_sifive.o
+carray-fdt_i2c_adapter_drivers-$(CONFIG_FDT_I2C_SIFIVE) += fdt_i2c_adapter_sifive
+libsbiutils-objs-$(CONFIG_FDT_I2C_SIFIVE) += i2c/fdt_i2c_sifive.o

platform/generic/configs/defconfig +2 -0

index ad66a63..c9c221e 100644
@@ -1,3 +1,5 @@
+CONFIG_FDT_I2C=y
+CONFIG_FDT_I2C_SIFIVE=y
 CONFIG_FDT_IPI=y
 CONFIG_FDT_IPI_MSWI=y
 CONFIG_FDT_IRQCHIP=y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #11 lore raw

PATCH v8 11/17 lib: utils/gpio: Use kconfig for enabling/disabling drivers

We update gpio drivers makefile to use kconfig for enabling/disabling drivers. To avoid compile errors, we also enable appropriate gpio drivers for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 lib/utils/Kconfig                  |  2 ++
 lib/utils/gpio/Kconfig             | 22 ++++++++++++++++++++++
 lib/utils/gpio/objects.mk          | 10 +++++-----
 lib/utils/reset/Kconfig            |  1 +
 platform/generic/configs/defconfig |  2 ++
 5 files changed, 32 insertions(+), 5 deletions(-)
 create mode 100644 lib/utils/gpio/Kconfig

lib/utils/Kconfig +2 -0

index 39452d5..673b02b 100644
@@ -2,6 +2,8 @@
 
 menu "Utils and Drivers Support"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/gpio/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/i2c/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/ipi/Kconfig"

lib/utils/gpio/Kconfig new file +22 -0

new file mode 100644
index 0000000..daf7f91
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menu "GPIO Support"
+
+config FDT_GPIO
+	bool "FDT based GPIO drivers"
+	select GPIO
+	default n
+
+if FDT_GPIO
+
+config FDT_GPIO_SIFIVE
+	bool "SiFive GPIO FDT driver"
+	default n
+
+endif
+
+config GPIO
+	bool "GPIO support"
+	default n
+
+endmenu

lib/utils/gpio/objects.mk +5 -5

index a5e131b..eedd699 100644
@@ -7,10 +7,10 @@
 #   Anup Patel <[email protected]>
 #
 
-libsbiutils-objs-y += gpio/fdt_gpio.o
-libsbiutils-objs-y += gpio/fdt_gpio_drivers.o
+libsbiutils-objs-$(CONFIG_FDT_GPIO) += gpio/fdt_gpio.o
+libsbiutils-objs-$(CONFIG_FDT_GPIO) += gpio/fdt_gpio_drivers.o
 
-carray-fdt_gpio_drivers-y += fdt_gpio_sifive
-libsbiutils-objs-y += gpio/fdt_gpio_sifive.o
+carray-fdt_gpio_drivers-$(CONFIG_FDT_GPIO_SIFIVE) += fdt_gpio_sifive
+libsbiutils-objs-$(CONFIG_FDT_GPIO_SIFIVE) += gpio/fdt_gpio_sifive.o
 
-libsbiutils-objs-y += gpio/gpio.o
+libsbiutils-objs-$(CONFIG_GPIO) += gpio/gpio.o

lib/utils/reset/Kconfig +1 -0

index e7a71e3..71996cb 100644
@@ -10,6 +10,7 @@ if FDT_RESET
 
 config FDT_RESET_GPIO
 	bool "GPIO FDT reset driver"
+	depends on FDT_GPIO
 	default n
 
 config FDT_RESET_HTIF

platform/generic/configs/defconfig +2 -0

index c9c221e..d56cef2 100644
@@ -1,3 +1,5 @@
+CONFIG_FDT_GPIO=y
+CONFIG_FDT_GPIO_SIFIVE=y
 CONFIG_FDT_I2C=y
 CONFIG_FDT_I2C_SIFIVE=y
 CONFIG_FDT_IPI=y

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #12 lore raw

PATCH v8 12/17 lib: utils/fdt: Use kconfig for enabling/disabling

We update FDT support makefile to use kconfig for enabling/disabling. To avoid compilation errors, we also enable FDT for each platform.

Signed-off-by Anup Patel <[email protected]>

---
 include/sbi_utils/fdt/fdt_domain.h             |  9 +++++++++
 include/sbi_utils/fdt/fdt_pmu.h                | 10 ++++++++++
 lib/utils/Kconfig                              |  4 ++++
 lib/utils/fdt/Kconfig                          | 18 ++++++++++++++++++
 lib/utils/fdt/objects.mk                       |  8 ++++----
 lib/utils/gpio/Kconfig                         |  1 +
 lib/utils/i2c/Kconfig                          |  1 +
 lib/utils/ipi/Kconfig                          |  1 +
 lib/utils/irqchip/Kconfig                      |  1 +
 {platform/generic => lib/utils/libfdt}/Kconfig |  4 ++--
 lib/utils/libfdt/objects.mk                    |  2 +-
 lib/utils/reset/Kconfig                        |  1 +
 lib/utils/serial/Kconfig                       |  1 +
 lib/utils/timer/Kconfig                        |  1 +
 platform/andes/ae350/Kconfig                   |  1 +
 platform/fpga/ariane/Kconfig                   |  1 +
 platform/fpga/openpiton/Kconfig                |  1 +
 platform/generic/Kconfig                       |  3 +++
 platform/kendryte/k210/Kconfig                 |  1 +
 platform/nuclei/ux600/Kconfig                  |  1 +
 platform/nuclei/ux600/platform.c               |  1 -
 21 files changed, 63 insertions(+), 8 deletions(-)
 create mode 100644 lib/utils/fdt/Kconfig
 copy {platform/generic => lib/utils/libfdt}/Kconfig (57%)

include/sbi_utils/fdt/fdt_domain.h +9 -0

index 5448eb4..ee09d1b 100644
@@ -13,6 +13,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_DOMAIN
+
 struct sbi_domain;
 
 /**

@@ -70,4 +72,11 @@ void fdt_domain_fixup(void *fdt);
  */
 int fdt_domains_populate(void *fdt);
 
+#else
+
+static inline void fdt_domain_fixup(void *fdt) { }
+static inline int fdt_domains_populate(void *fdt) { return 0; }
+
+#endif
+
 #endif /* __FDT_DOMAIN_H__ */

include/sbi_utils/fdt/fdt_pmu.h +10 -0

index 2fa01ed..c65cad7 100644
@@ -13,6 +13,8 @@
 
 #include <sbi/sbi_types.h>
 
+#ifdef CONFIG_FDT_PMU
+
 /**
  * Fix up the PMU node in the device tree
  *

@@ -43,4 +45,12 @@ int fdt_pmu_setup(void *fdt);
  */
 uint64_t fdt_pmu_get_select_value(uint32_t event_idx);
 
+#else
+
+static inline void fdt_pmu_fixup(void *fdt) { }
+static inline int fdt_pmu_setup(void *fdt) { return 0; }
+static inline uint64_t fdt_pmu_get_select_value(uint32_t event_idx) { return 0; }
+
+#endif
+
 #endif

lib/utils/Kconfig +4 -0

index 673b02b..5a71e75 100644
@@ -2,6 +2,8 @@
 
 menu "Utils and Drivers Support"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/fdt/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/gpio/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/i2c/Kconfig"

@@ -10,6 +12,8 @@ source "$(OPENSBI_SRC_DIR)/lib/utils/ipi/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/irqchip/Kconfig"
 
+source "$(OPENSBI_SRC_DIR)/lib/utils/libfdt/Kconfig"
+
 source "$(OPENSBI_SRC_DIR)/lib/utils/reset/Kconfig"
 
 source "$(OPENSBI_SRC_DIR)/lib/utils/serial/Kconfig"

lib/utils/fdt/Kconfig new file +18 -0

new file mode 100644
index 0000000..23b003b
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-2-Clause
+
+menuconfig FDT
+	bool "Flattened Device Tree (FDT) support"
+	select LIBFDT
+	default n
+
+if FDT
+
+config FDT_DOMAIN
+	bool "FDT domain support"
+	default n
+
+config FDT_PMU
+	bool "FDT performance monitoring unit (PMU) support"
+	default n
+
+endif

lib/utils/fdt/objects.mk +4 -4

index 03800f9..5cede81 100644
@@ -4,7 +4,7 @@
 # Copyright (C) 2020 Bin Meng <[email protected]>
 #
 
-libsbiutils-objs-y += fdt/fdt_domain.o
-libsbiutils-objs-y += fdt/fdt_pmu.o
-libsbiutils-objs-y += fdt/fdt_helper.o
-libsbiutils-objs-y += fdt/fdt_fixup.o
+libsbiutils-objs-$(CONFIG_FDT_DOMAIN) += fdt/fdt_domain.o
+libsbiutils-objs-$(CONFIG_FDT_PMU) += fdt/fdt_pmu.o
+libsbiutils-objs-$(CONFIG_FDT) += fdt/fdt_helper.o
+libsbiutils-objs-$(CONFIG_FDT) += fdt/fdt_fixup.o

lib/utils/gpio/Kconfig +1 -0

index daf7f91..38a9d75 100644
@@ -4,6 +4,7 @@ menu "GPIO Support"
 
 config FDT_GPIO
 	bool "FDT based GPIO drivers"
+	depends on FDT
 	select GPIO
 	default n

lib/utils/i2c/Kconfig +1 -0

index 16c4453..46a3454 100644
@@ -4,6 +4,7 @@ menu "I2C Support"
 
 config FDT_I2C
 	bool "FDT based I2C drivers"
+	depends on FDT
 	select I2C
 	default n

lib/utils/ipi/Kconfig +1 -0

index c0634d3..efc8960 100644
@@ -4,6 +4,7 @@ menu "IPI Device Support"
 
 config FDT_IPI
 	bool "FDT based ipi drivers"
+	depends on FDT
 	default n
 
 if FDT_IPI

lib/utils/irqchip/Kconfig +1 -0

index 6a7e297..7a71388 100644
@@ -4,6 +4,7 @@ menu "Interrupt Controller Support"
 
 config FDT_IRQCHIP
 	bool "FDT based interrupt controller drivers"
+	depends on FDT
 	default n
 
 if FDT_IRQCHIP

lib/utils/libfdt/Kconfig renamed from platform/generic/Kconfig +2 -2

similarity index 57%
copy from platform/generic/Kconfig
copy to lib/utils/libfdt/Kconfig
index 3eab282..d1cecf8 100644
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: BSD-2-Clause
 
-config PLATFORM_GENERIC
+config LIBFDT
 	bool
-	default y
+	default n

lib/utils/libfdt/objects.mk +1 -1

index 8c060df..0e01b54 100644
@@ -12,5 +12,5 @@ libfdt_files = fdt.o fdt_addresses.o fdt_check.o fdt_empty_tree.o fdt_ro.o fdt_r
 $(foreach file, $(libfdt_files), \
         $(eval CFLAGS_$(file) = -I$(src)/../../utils/libfdt))
 
-libsbiutils-objs-y += $(addprefix libfdt/,$(libfdt_files))
+libsbiutils-objs-$(CONFIG_LIBFDT) += $(addprefix libfdt/,$(libfdt_files))
 libsbiutils-genflags-y  += -I$(libsbiutils_dir)/libfdt/

lib/utils/reset/Kconfig +1 -0

index 71996cb..2e83ff6 100644
@@ -4,6 +4,7 @@ menu "System Reset Support"
 
 config FDT_RESET
 	bool "FDT based reset drivers"
+	depends on FDT
 	default n
 
 if FDT_RESET

lib/utils/serial/Kconfig +1 -0

index bf37e34..152060d 100644
@@ -4,6 +4,7 @@ menu "Serial Device Support"
 
 config FDT_SERIAL
 	bool "FDT based serial drivers"
+	depends on FDT
 	default n
 
 if FDT_SERIAL

lib/utils/timer/Kconfig +1 -0

index 0a1c727..23c48c5 100644
@@ -4,6 +4,7 @@ menu "Timer Device Support"
 
 config FDT_TIMER
 	bool "FDT based timer drivers"
+	depends on FDT
 	default n
 
 if FDT_TIMER

platform/andes/ae350/Kconfig +1 -0

index 87deab0..d57f19f 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_ANDES_AE350
 	bool
+	select FDT
 	select IRQCHIP_PLIC
 	select SERIAL_UART8250
 	default y

platform/fpga/ariane/Kconfig +1 -0

index 5a720d9..e1f118b 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_ARIANE_FPGA
 	bool
+	select FDT
 	select IPI_MSWI
 	select IRQCHIP_PLIC
 	select SERIAL_UART8250

platform/fpga/openpiton/Kconfig +1 -0

index 973906e..bc9c86e 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_OPENPITON_FPGA
 	bool
+	select FDT
 	select IPI_MSWI
 	select IRQCHIP_PLIC
 	select SERIAL_UART8250

platform/generic/Kconfig +3 -0

index 3eab282..c1a77b3 100644
@@ -2,4 +2,7 @@
 
 config PLATFORM_GENERIC
 	bool
+	select FDT
+	select FDT_DOMAIN
+	select FDT_PMU
 	default y

platform/kendryte/k210/Kconfig +1 -0

index 2a1daaa..5bf5973 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_KENDRYTE_K210
 	bool
+	select FDT
 	select IPI_MSWI
 	select IRQCHIP_PLIC
 	select SERIAL_SIFIVE

platform/nuclei/ux600/Kconfig +1 -0

index 464802e..84d74e8 100644
@@ -2,6 +2,7 @@
 
 config PLATFORM_NUCLEI_UX600
 	bool
+	select FDT
 	select IPI_MSWI
 	select IRQCHIP_PLIC
 	select SERIAL_SIFIVE

platform/nuclei/ux600/platform.c +0 -1

index 5498a1f..2b02734 100644
@@ -8,7 +8,6 @@
  *   hqfang <[email protected]>
  */
 
-#include <libfdt.h>
 #include <sbi/riscv_asm.h>
 #include <sbi/riscv_io.h>
 #include <sbi/riscv_encoding.h>

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #13 lore raw

PATCH v8 13/17 platform: generic: Use kconfig for enabling/disabling overrides

We update generic platform to use kconfig for enabling/disabling platform overrides. We also enable all platform overrides in generic platform defconfig.

Signed-off-by Anup Patel <[email protected]>

---
 platform/generic/Kconfig              | 18 ++++++++++++++++++
 platform/generic/allwinner/objects.mk |  4 ++--
 platform/generic/configs/defconfig    |  3 +++
 platform/generic/sifive/objects.mk    |  8 ++++----
 4 files changed, 27 insertions(+), 6 deletions(-)

platform/generic/Kconfig +18 -0

index c1a77b3..c76bd12 100644
@@ -6,3 +6,21 @@ config PLATFORM_GENERIC
 	select FDT_DOMAIN
 	select FDT_PMU
 	default y
+
+if PLATFORM_GENERIC
+
+config PLATFORM_ALLWINNER_D1
+	bool "Allwinner D1 support"
+	depends on FDT_IRQCHIP_PLIC
+	default n
+
+config PLATFORM_SIFIVE_FU540
+	bool "SiFive FU540 support"
+	default n
+
+config PLATFORM_SIFIVE_FU740
+	bool "SiFive FU740 support"
+	depends on FDT_RESET && FDT_I2C
+	default n
+
+endif

platform/generic/allwinner/objects.mk +2 -2

index 9e36ab6..447cdf1 100644
@@ -2,5 +2,5 @@
 # SPDX-License-Identifier: BSD-2-Clause
 #
 
-carray-platform_override_modules-y += sun20i_d1
-platform-objs-y += allwinner/sun20i-d1.o
+carray-platform_override_modules-$(CONFIG_PLATFORM_ALLWINNER_D1) += sun20i_d1
+platform-objs-$(CONFIG_PLATFORM_ALLWINNER_D1) += allwinner/sun20i-d1.o

platform/generic/configs/defconfig +3 -0

index d56cef2..2a75394 100644
@@ -1,3 +1,6 @@
+CONFIG_PLATFORM_ALLWINNER_D1=y
+CONFIG_PLATFORM_SIFIVE_FU540=y
+CONFIG_PLATFORM_SIFIVE_FU740=y
 CONFIG_FDT_GPIO=y
 CONFIG_FDT_GPIO_SIFIVE=y
 CONFIG_FDT_I2C=y

platform/generic/sifive/objects.mk +4 -4

index c17e2df..d75e444 100644
@@ -2,8 +2,8 @@
 # SPDX-License-Identifier: BSD-2-Clause
 #
 
-carray-platform_override_modules-y += sifive_fu540
-platform-objs-y += sifive/fu540.o
+carray-platform_override_modules-$(CONFIG_PLATFORM_SIFIVE_FU540) += sifive_fu540
+platform-objs-$(CONFIG_PLATFORM_SIFIVE_FU540) += sifive/fu540.o
 
-carray-platform_override_modules-y += sifive_fu740
-platform-objs-y += sifive/fu740.o
+carray-platform_override_modules-$(CONFIG_PLATFORM_SIFIVE_FU740) += sifive_fu740
+platform-objs-$(CONFIG_PLATFORM_SIFIVE_FU740) += sifive/fu740.o

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #14 lore raw

PATCH v8 14/17 platform: generic: Use kconfig to set platform version and default name

The generic platform version and default name should be set based on kconfig options so that users can override it.

Signed-off-by Anup Patel <[email protected]>

Reviewed-by Andrew Jones <[email protected]>

---
 platform/generic/Kconfig    | 14 ++++++++++++++
 platform/generic/platform.c |  6 ++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

platform/generic/Kconfig +14 -0

index c76bd12..63d1be4 100644
@@ -9,6 +9,20 @@ config PLATFORM_GENERIC
 
 if PLATFORM_GENERIC
 
+config PLATFORM_GENERIC_NAME
+	string "Platform default name"
+	default "Generic"
+
+config PLATFORM_GENERIC_MAJOR_VER
+	int "Platform major version"
+	range 0 65535
+	default 0
+
+config PLATFORM_GENERIC_MINOR_VER
+	int "Platform minor version"
+	range 0 65535
+	default 1
+
 config PLATFORM_ALLWINNER_D1
 	bool "Allwinner D1 support"
 	depends on FDT_IRQCHIP_PLIC

platform/generic/platform.c +4 -2

index bf93af6..cc3620f 100644
@@ -265,8 +265,10 @@ const struct sbi_platform_operations platform_ops = {
 
 struct sbi_platform platform = {
 	.opensbi_version	= OPENSBI_VERSION,
-	.platform_version	= SBI_PLATFORM_VERSION(0x0, 0x01),
-	.name			= "Generic",
+	.platform_version	=
+		SBI_PLATFORM_VERSION(CONFIG_PLATFORM_GENERIC_MAJOR_VER,
+				     CONFIG_PLATFORM_GENERIC_MINOR_VER),
+	.name			= CONFIG_PLATFORM_GENERIC_NAME,
 	.features		= SBI_PLATFORM_DEFAULT_FEATURES,
 	.hart_count		= SBI_HARTMASK_MAX_BITS,
 	.hart_index2id		= generic_hart_index2id,

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #15 lore raw

PATCH v8 15/17 platform: Remove redundant config.mk from all platforms

The options defined in config.mk can be specified in objects.mk of each platform so let us remove config.mk from all platforms.

Signed-off-by Anup Patel <[email protected]>

---
 Makefile                           |  4 +-
 platform/andes/ae350/config.mk     | 36 --------------
 platform/andes/ae350/objects.mk    | 29 +++++++++++
 platform/fpga/ariane/config.mk     | 36 --------------
 platform/fpga/ariane/objects.mk    | 35 ++++++++++++++
 platform/fpga/openpiton/config.mk  | 35 --------------
 platform/fpga/openpiton/objects.mk | 35 ++++++++++++++
 platform/generic/config.mk         | 40 ----------------
 platform/generic/objects.mk        | 33 +++++++++++++
 platform/kendryte/k210/config.mk   | 19 --------
 platform/kendryte/k210/objects.mk  | 12 +++++
 platform/nuclei/ux600/config.mk    | 30 ------------
 platform/nuclei/ux600/objects.mk   | 22 +++++++++
 platform/template/config.mk        | 77 ------------------------------
 platform/template/objects.mk       | 72 ++++++++++++++++++++++++++++
 platform/template/platform.c       |  2 +-
 16 files changed, 240 insertions(+), 277 deletions(-)
 delete mode 100644 platform/andes/ae350/config.mk
 delete mode 100644 platform/fpga/ariane/config.mk
 delete mode 100644 platform/fpga/openpiton/config.mk
 delete mode 100644 platform/generic/config.mk
 delete mode 100644 platform/kendryte/k210/config.mk
 delete mode 100644 platform/nuclei/ux600/config.mk
 delete mode 100644 platform/template/config.mk

Makefile +1 -3

index 011c7a4..e716e8c 100644
@@ -204,7 +204,7 @@ firmware-object-mks=$(shell if [ -d $(firmware_dir) ]; then find $(firmware_dir)
 .PHONY: all
 all:
 
-# Include platform specific .config and config.mk
+# Include platform specific .config
 ifdef PLATFORM
 .PHONY: menuconfig
 menuconfig: $(platform_src_dir)/Kconfig $(src_dir)/Kconfig

@@ -229,8 +229,6 @@ $(KCONFIG_AUTOCMD): $(KCONFIG_CONFIG)
 
 include $(KCONFIG_CONFIG)
 include $(KCONFIG_AUTOCMD)
-
-include $(platform_src_dir)/config.mk
 endif
 
 # Include all object.mk files

platform/andes/ae350/config.mk deleted +0 ~~-36~~

deleted file mode 100644
index f555ef5..0000000
@@ -1,36 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (c) 2019 Andes Technology Corporation
-#
-# Authors:
-#   Zong Li <[email protected]>
-#   Nylon Chen <[email protected]>
-
-# Compiler flags
-platform-cppflags-y =
-platform-cflags-y =
-platform-asflags-y =
-platform-ldflags-y =
-
-# Blobs to build
-FW_TEXT_START=0x00000000
-
-FW_DYNAMIC=y
-
-FW_JUMP=y
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-  FW_JUMP_ADDR=0x400000
-else
-  FW_JUMP_ADDR=0x200000
-endif
-FW_JUMP_FDT_ADDR=0x2000000
-
-FW_PAYLOAD=y
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-  FW_PAYLOAD_OFFSET=0x400000
-else
-  FW_PAYLOAD_OFFSET=0x200000
-endif
-
-FW_PAYLOAD_FDT_ADDR=0x2000000

platform/andes/ae350/objects.mk +29 -0

index 5369677..80f0737 100644
@@ -8,4 +8,33 @@
 #   Nylon Chen <[email protected]>
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Objects to build
 platform-objs-y += cache.o platform.o plicsw.o plmt.o
+
+# Blobs to build
+FW_TEXT_START=0x00000000
+
+FW_DYNAMIC=y
+
+FW_JUMP=y
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+  FW_JUMP_ADDR=0x400000
+else
+  FW_JUMP_ADDR=0x200000
+endif
+FW_JUMP_FDT_ADDR=0x2000000
+
+FW_PAYLOAD=y
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+  FW_PAYLOAD_OFFSET=0x400000
+else
+  FW_PAYLOAD_OFFSET=0x200000
+endif
+
+FW_PAYLOAD_FDT_ADDR=0x2000000

platform/fpga/ariane/config.mk deleted +0 ~~-36~~

deleted file mode 100644
index 3556461..0000000
@@ -1,36 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (C) 2019 FORTH-ICS/CARV
-#		Panagiotis Peristerakis <[email protected]>
-#
-
-#for more infos, check out /platform/template/config.mk
-
-PLATFORM_RISCV_XLEN = 64
-
-# Blobs to build
-FW_TEXT_START=0x80000000
-FW_JUMP=n
-
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
- # This needs to be 4MB aligned for 32-bit support
- FW_JUMP_ADDR=0x80400000
- else
- # This needs to be 2MB aligned for 64-bit support
- FW_JUMP_ADDR=0x80200000
- endif
-FW_JUMP_FDT_ADDR=0x82200000
-
-# Firmware with payload configuration.
-FW_PAYLOAD=y
-
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-# This needs to be 4MB aligned for 32-bit support
-  FW_PAYLOAD_OFFSET=0x400000
-else
-# This needs to be 2MB aligned for 64-bit support
-  FW_PAYLOAD_OFFSET=0x200000
-endif
-FW_PAYLOAD_FDT_ADDR=0x82200000
-FW_PAYLOAD_ALIGN=0x1000

platform/fpga/ariane/objects.mk +35 -0

index 814e6da..83581ac 100644
@@ -5,4 +5,39 @@
 #		Panagiotis Peristerakis <[email protected]>
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Object to build
 platform-objs-y += platform.o
+
+PLATFORM_RISCV_XLEN = 64
+
+# Blobs to build
+FW_TEXT_START=0x80000000
+FW_JUMP=n
+
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+ # This needs to be 4MB aligned for 32-bit support
+ FW_JUMP_ADDR=0x80400000
+ else
+ # This needs to be 2MB aligned for 64-bit support
+ FW_JUMP_ADDR=0x80200000
+ endif
+FW_JUMP_FDT_ADDR=0x82200000
+
+# Firmware with payload configuration.
+FW_PAYLOAD=y
+
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+# This needs to be 4MB aligned for 32-bit support
+  FW_PAYLOAD_OFFSET=0x400000
+else
+# This needs to be 2MB aligned for 64-bit support
+  FW_PAYLOAD_OFFSET=0x200000
+endif
+FW_PAYLOAD_FDT_ADDR=0x82200000
+FW_PAYLOAD_ALIGN=0x1000

platform/fpga/openpiton/config.mk deleted +0 ~~-35~~

deleted file mode 100644
index a969b25..0000000
@@ -1,35 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (c) 2020 Western Digital Corporation or its affiliates.
-#
-
-#for more infos, check out /platform/template/config.mk
-
-PLATFORM_RISCV_XLEN = 64
-
-# Blobs to build
-FW_TEXT_START=0x80000000
-FW_JUMP=n
-
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
- # This needs to be 4MB aligned for 32-bit support
- FW_JUMP_ADDR=0x80400000
- else
- # This needs to be 2MB aligned for 64-bit support
- FW_JUMP_ADDR=0x80200000
- endif
-FW_JUMP_FDT_ADDR=0x82200000
-
-# Firmware with payload configuration.
-FW_PAYLOAD=y
-
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-# This needs to be 4MB aligned for 32-bit support
-  FW_PAYLOAD_OFFSET=0x400000
-else
-# This needs to be 2MB aligned for 64-bit support
-  FW_PAYLOAD_OFFSET=0x200000
-endif
-FW_PAYLOAD_FDT_ADDR=0x82200000
-FW_PAYLOAD_ALIGN=0x1000

platform/fpga/openpiton/objects.mk +35 -0

index 30a3c4f..c8c345a 100644
@@ -4,4 +4,39 @@
 # Copyright (c) 2020 Western Digital Corporation or its affiliates.
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Objects to build
 platform-objs-y += platform.o
+
+PLATFORM_RISCV_XLEN = 64
+
+# Blobs to build
+FW_TEXT_START=0x80000000
+FW_JUMP=n
+
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+ # This needs to be 4MB aligned for 32-bit support
+ FW_JUMP_ADDR=0x80400000
+ else
+ # This needs to be 2MB aligned for 64-bit support
+ FW_JUMP_ADDR=0x80200000
+ endif
+FW_JUMP_FDT_ADDR=0x82200000
+
+# Firmware with payload configuration.
+FW_PAYLOAD=y
+
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+# This needs to be 4MB aligned for 32-bit support
+  FW_PAYLOAD_OFFSET=0x400000
+else
+# This needs to be 2MB aligned for 64-bit support
+  FW_PAYLOAD_OFFSET=0x200000
+endif
+FW_PAYLOAD_FDT_ADDR=0x82200000
+FW_PAYLOAD_ALIGN=0x1000

platform/generic/config.mk deleted +0 ~~-40~~

deleted file mode 100644
index 8151974..0000000
@@ -1,40 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (c) 2020 Western Digital Corporation or its affiliates.
-#
-# Authors:
-#   Anup Patel <[email protected]>
-#
-
-# Compiler flags
-platform-cppflags-y =
-platform-cflags-y =
-platform-asflags-y =
-platform-ldflags-y =
-
-# Command for platform specific "make run"
-platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M virt -m 256M \
-  -nographic -bios $(build_dir)/platform/generic/firmware/fw_payload.elf
-
-# Blobs to build
-FW_TEXT_START=0x80000000
-FW_DYNAMIC=y
-FW_JUMP=y
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-  # This needs to be 4MB aligned for 32-bit system
-  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x400000)))
-else
-  # This needs to be 2MB aligned for 64-bit system
-  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x200000)))
-endif
-FW_JUMP_FDT_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x2200000)))
-FW_PAYLOAD=y
-ifeq ($(PLATFORM_RISCV_XLEN), 32)
-  # This needs to be 4MB aligned for 32-bit system
-  FW_PAYLOAD_OFFSET=0x400000
-else
-  # This needs to be 2MB aligned for 64-bit system
-  FW_PAYLOAD_OFFSET=0x200000
-endif
-FW_PAYLOAD_FDT_ADDR=$(FW_JUMP_FDT_ADDR)

platform/generic/objects.mk +33 -0

index 4907754..136853e 100644
@@ -7,5 +7,38 @@
 #   Anup Patel <[email protected]>
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Command for platform specific "make run"
+platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M virt -m 256M \
+  -nographic -bios $(build_dir)/platform/generic/firmware/fw_payload.elf
+
+# Objects to build
 platform-objs-y += platform.o
 platform-objs-y += platform_override_modules.o
+
+# Blobs to build
+FW_TEXT_START=0x80000000
+FW_DYNAMIC=y
+FW_JUMP=y
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+  # This needs to be 4MB aligned for 32-bit system
+  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x400000)))
+else
+  # This needs to be 2MB aligned for 64-bit system
+  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x200000)))
+endif
+FW_JUMP_FDT_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x2200000)))
+FW_PAYLOAD=y
+ifeq ($(PLATFORM_RISCV_XLEN), 32)
+  # This needs to be 4MB aligned for 32-bit system
+  FW_PAYLOAD_OFFSET=0x400000
+else
+  # This needs to be 2MB aligned for 64-bit system
+  FW_PAYLOAD_OFFSET=0x200000
+endif
+FW_PAYLOAD_FDT_ADDR=$(FW_JUMP_FDT_ADDR)

platform/kendryte/k210/config.mk deleted +0 ~~-19~~

deleted file mode 100644
index 8a9b814..0000000
@@ -1,19 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (c) 2019 Western Digital Corporation or its affiliates.
-#
-# Authors:
-#   Damien Le Moal <[email protected]>
-#
-
-# Compiler flags
-platform-cppflags-y =
-platform-cflags-y =
-platform-asflags-y =
-platform-ldflags-y =
-
-# Blobs to build
-FW_TEXT_START=0x80000000
-FW_PAYLOAD=y
-FW_PAYLOAD_ALIGN=0x1000

platform/kendryte/k210/objects.mk +12 -0

index b74da74..1bfb898 100644
@@ -7,8 +7,20 @@
 #   Damien Le Moal <[email protected]>
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Objects to build
 platform-objs-y += platform.o
 
 platform-objs-y += k210.o
 platform-varprefix-k210.o = dt_k210
 platform-padding-k210.o = 2048
+
+# Blobs to build
+FW_TEXT_START=0x80000000
+FW_PAYLOAD=y
+FW_PAYLOAD_ALIGN=0x1000

platform/nuclei/ux600/config.mk deleted +0 ~~-30~~

deleted file mode 100644
index dddcc4e..0000000
@@ -1,30 +0,0 @@
-#
-# SPDX-License-Identifier: BSD-2-Clause
-#
-# Copyright (c) 2020 Nuclei Corporation or its affiliates.
-#
-# Authors:
-#   lujun <[email protected]>
-#   hqfang <[email protected]>
-#
-
-# Compiler flags
-platform-cppflags-y =
-platform-cflags-y =
-platform-asflags-y =
-platform-ldflags-y =
-
-# Command for platform specific "make run"
-platform-runcmd = xl_spike \
-  $(build_dir)/platform/nuclei/ux600/firmware/fw_payload.elf
-
-# Blobs to build
-FW_TEXT_START=0xA0000000
-FW_DYNAMIC=y
-FW_JUMP=y
-
-FW_JUMP_ADDR=0xA0200000
-FW_JUMP_FDT_ADDR=0xA8000000
-FW_PAYLOAD=y
-FW_PAYLOAD_OFFSET=0x200000
-FW_PAYLOAD_FDT_ADDR=0xA8000000

platform/nuclei/ux600/objects.mk +22 -0

index 8c36c90..7c429e0 100644
@@ -8,4 +8,26 @@
 #   hqfang <[email protected]>
 #
 
+# Compiler flags
+platform-cppflags-y =
+platform-cflags-y =
+platform-asflags-y =
+platform-ldflags-y =
+
+# Command for platform specific "make run"
+platform-runcmd = xl_spike \
+  $(build_dir)/platform/nuclei/ux600/firmware/fw_payload.elf
+
+# Objects to build
 platform-objs-y += platform.o
+
+# Blobs to build
+FW_TEXT_START=0xA0000000
+FW_DYNAMIC=y
+FW_JUMP=y
+
+FW_JUMP_ADDR=0xA0200000
+FW_JUMP_FDT_ADDR=0xA8000000
+FW_PAYLOAD=y
+FW_PAYLOAD_OFFSET=0x200000
+FW_PAYLOAD_FDT_ADDR=0xA8000000

platform/template/config.mk deleted +0 ~~-77~~

77 lines not on this page · raw message

platform/template/objects.mk +72 -0

81 lines not on this page · raw message

platform/template/platform.c +1 -1

index 5524847..f3802da 100644
@@ -11,7 +11,7 @@
 
 /*
  * Include these files as needed.
- * See config.mk PLATFORM_xxx configuration parameters.
+ * See objects.mk PLATFORM_xxx configuration parameters.
  */
 #include <sbi_utils/ipi/aclint_mswi.h>
 #include <sbi_utils/irqchip/plic.h>

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #16 lore raw

PATCH v8 16/17 docs: Update documentation for kconfig support

We update all documentation files to:
1) Remove references to platform specific config.mk file since it is has been removed.
2) Add details about platform specific configs/defconfig and Kconfig files mandatory for each platform.
3) Add required packages in top-level README.md
4) Fix typo releated to object.mk in docs/platform/platform.md

Signed-off-by Anup Patel <[email protected]>

Reviewed-by Andrew Jones <[email protected]>

---
 README.md                   | 25 +++++++++++++++++++++++--
 docs/firmware/fw_dynamic.md |  2 +-
 docs/firmware/fw_jump.md    |  4 ++--
 docs/firmware/fw_payload.md |  4 ++--
 docs/platform/platform.md   |  6 +++---
 docs/platform_guide.md      |  9 +++++----
 6 files changed, 36 insertions(+), 14 deletions(-)

README.md +23 -2

index 54fabe4..895bbf2 100644
@@ -92,8 +92,8 @@ N.B. Any S-mode boot loader (i.e. U-Boot) doesn't need to support HSM extension,
 as it doesn't need to boot all the harts. The operating system should be
 capable enough to bring up all other non-booting harts using HSM extension.
 
-Required Toolchain
-------------------
+Required Toolchain and Packages
+-------------------------------
 
 OpenSBI can be compiled natively or cross-compiled on a x86 host. For
 cross-compilation, you can build your own toolchain, download a prebuilt one

@@ -115,6 +115,14 @@ triple is used (e.g. *-target riscv64-unknown-elf*).
 Please note that only a 64-bit version of the toolchain is available in
 the Bootlin toolchain repository for now.
 
+In addition to a toolchain, OpenSBI also requires the following packages on
+the host:
+
+1. device-tree-compiler: The device tree compiler for compiling device
+   tree sources (DTS files).
+2. python3: The python 3.0 (or compatible) language support for various
+   scripts.
+
 Building and Installing the OpenSBI Platform-Independent Library
 ----------------------------------------------------------------

@@ -196,6 +204,19 @@ top-level make command line. These options, such as *PLATFORM_<xyz>* or
 *docs/platform/<platform_name>.md* files and
 *docs/firmware/<firmware_name>.md* files.
 
+All OpenSBI platforms support Kconfig style build-time configuration. Users
+can change the build-time configuration of a platform using a graphical
+interface as follows:
+```
+make PLATFORM=<platform_subdir> menuconfig
+```
+
+Alternately, an OpenSBI platform can have multiple default configurations
+and users can select a custom default configuration as follows:
+```
+make PLATFORM=<platform_subdir> PLATFORM_DEFCONFIG=<platform_custom_defconfig>
+```
+
 Building 32-bit / 64-bit OpenSBI Images
 ---------------------------------------
 By default, building OpenSBI generates 32-bit or 64-bit images based on the

docs/firmware/fw_dynamic.md +1 -1

index 7b9b192..e251488 100644
@@ -20,7 +20,7 @@ the booting stage binary to follow OpenSBI firmware.
 A platform can enable *FW_DYNAMIC* firmware using any of the following methods.
 
 1. Specifying `FW_DYNAMIC=y` on the top level `make` command line.
-2. Specifying `FW_DYNAMIC=y` in the target platform *config.mk* configuration
+2. Specifying `FW_DYNAMIC=y` in the target platform *objects.mk* configuration
 file.
 
 The compiled *FW_DYNAMIC* firmware ELF file is named *fw_dynamic.elf*. It's

docs/firmware/fw_jump.md +2 -2

index eea3013..35a4301 100644
@@ -15,7 +15,7 @@ and the booting stage binary to follow the OpenSBI firmware.
 A platform *FW_JUMP* firmware can be enabled by any of the following methods:
 
 1. Specifying `FW_JUMP=y` on the top level `make` command line.
-2. Specifying `FW_JUMP=y` in the target platform *config.mk* configuration file.
+2. Specifying `FW_JUMP=y` in the target platform *objects.mk* configuration file.
 
 The compiled *FW_JUMP* firmware ELF file is named *fw_jump.elf*. Its expanded
 image file is *fw_jump.bin*. Both files are created in the platform-specific

@@ -26,7 +26,7 @@ build directory under the *build/platform/<platform_subdir>/firmware* directory.
 
 To operate correctly, a *FW_JUMP* firmware requires some configuration
 parameters to be defined using either the top level `make` command line or the
-target platform *config.mk* configuration file. The possible parameters are as
+target platform *objects.mk* configuration file. The possible parameters are as
 follows:
 
 * **FW_JUMP_ADDR** - Address of the entry point of the booting stage to be

docs/firmware/fw_payload.md +2 -2

index 0947448..3bb918f 100644
@@ -20,7 +20,7 @@ Enabling *FW_PAYLOAD* compilation
 The *FW_PAYLOAD* firmware can be enabled by any of the following methods:
 
 1. Specifying `FW_PAYLOAD=y` on the top level `make` command line.
-2. Specifying `FW_PAYLOAD=y` in the target platform *config.mk* configuration
+2. Specifying `FW_PAYLOAD=y` in the target platform *objects.mk* configuration
    file.
 
 The compiled *FW_PAYLOAD* firmware ELF file is named *fw_jump.elf*. Its

@@ -33,7 +33,7 @@ Configuration Options
 
 A *FW_PAYLOAD* firmware is built according to configuration parameters and
 options. These configuration parameters can be defined using either the top
-level `make` command line or the target platform *config.mk* configuration
+level `make` command line or the target platform *objects.mk* configuration
 file. The parameters currently defined are as follows:
 
 * **FW_PAYLOAD_OFFSET** - Offset from *FW_TEXT_BASE* where the payload binary

docs/platform/platform.md +3 -3

index cb4bec6..f291931 100644
@@ -41,9 +41,9 @@ OpenSBI currently supports the following virtual and hardware platforms:
 
 The code for these supported platforms can be used as example to implement
 support for other platforms. The *platform/template* directory also provides
-template files for implementing support for a new platform. The *object.mk*,
-*config.mk* and *platform.c* template files provides enough comments to
-facilitate the implementation.
+template files for implementing support for a new platform. The *objects.mk*,
+*Kconfig*, *configs/defconfig* and *platform.c* template files provides enough
+comments to facilitate the implementation.
 
 [generic.md]: generic.md
 [qemu_virt.md]: qemu_virt.md

docs/platform_guide.md +5 -4

index b6c2c2e..38fd516 100644
@@ -28,11 +28,12 @@ Adding support for a new platform
 Support for a new platform named *&lt;xyz&gt;* can be added as follows:
 
 1. Create a directory named *&lt;xyz&gt;* under the *platform/* directory.
-2. Create a platform configuration file named *config.mk* under the
-   *platform/&lt;xyz&gt;/* directory. This configuration file will provide
+2. Create platform configuration files named *Kconfig* and *configs/defconfig*
+   under the *platform/&lt;xyz&gt;/* directory. These configuration files will
+   provide the build time configuration for the sources to be compiled.
+3. Create a *platform/&lt;xyz&gt;/objects.mk* file for listing the platform
+   object files to be compiled. This file also provides platform-specific
    compiler flags, and select firmware options.
-3. Create a *platform/&lt;xyz&gt;/objects.mk* file for listing the
-   platform-specific object files to be compiled.
 4. Create a *platform/&lt;xyz&gt;/platform.c* file providing a
    *struct sbi_platform* instance.

Signature · 1 line

2.34.1

Anup Patel

author

2022-08-08 03:57 UTC #17 lore raw

PATCH v8 17/17 Makefile: Fix typo related to object.mk

The "object.mk" name referred in top-level makefile should be "objects.mk".

Signed-off-by Anup Patel <[email protected]>

Reviewed-by Andrew Jones <[email protected]>

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Makefile +1 -1

index e716e8c..0ab9f22 100644
@@ -231,7 +231,7 @@ include $(KCONFIG_CONFIG)
 include $(KCONFIG_AUTOCMD)
 endif
 
-# Include all object.mk files
+# Include all objects.mk files
 ifdef PLATFORM
 include $(platform-object-mks)
 endif

Signature · 1 line

2.34.1

Anup Patel

Applied

2022-08-08 04:06 UTC #18 lore raw

v8 cover OpenSBI Kconfig Support