Skip to contentSkip to conversation

ASoC: cs42l42: Only report button state if there was a button interrupt

PATCH In review Richard Fitzgerald 2 participants 2 messages Aug 15, 2022

Subsystems (3)
lore
Share & tools
lore

Richard Fitzgerald

author maintainer
#0 lore raw

PATCH 1/1 ASoC: cs42l42: Only report button state if there was a button interrupt

Only report a button state change if the interrupt status shows that there was a button event.

Previously the code would always drop into the button reporting at the end of interrupt handling if the jack was present. If neither of the button report interrupts were pending it would report all buttons released. This could then lead to a button being reported as released while it is still pressed.

Fixes c5b8ee0879bc ("ASoC: cs42l42: Report jack and button detection")
---
 sound/soc/codecs/cs42l42.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
sound/soc/codecs/cs42l42.c +7 -6
index d545a593a251..daafd4251ce6 100644
@@ -1617,7 +1617,6 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data)
 	unsigned int current_plug_status;
 	unsigned int current_button_status;
 	unsigned int i;
-	int report = 0;
 
 	mutex_lock(&cs42l42->irq_lock);
 	if (cs42l42->suspended) {
@@ -1711,13 +1710,15 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data)
 
 			if (current_button_status & CS42L42_M_DETECT_TF_MASK) {
 				dev_dbg(cs42l42->dev, "Button released\n");
-				report = 0;
+				snd_soc_jack_report(cs42l42->jack, 0,
+						    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						    SND_JACK_BTN_2 | SND_JACK_BTN_3);
 			} else if (current_button_status & CS42L42_M_DETECT_FT_MASK) {
-				report = cs42l42_handle_button_press(cs42l42);
-
+				snd_soc_jack_report(cs42l42->jack,
+						    cs42l42_handle_button_press(cs42l42),
+						    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						    SND_JACK_BTN_2 | SND_JACK_BTN_3);
 			}
-			snd_soc_jack_report(cs42l42->jack, report, SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-								   SND_JACK_BTN_2 | SND_JACK_BTN_3);
 		}
 	}
 
Signature · 1 line
2.30.2
maintainer
#1 lore raw
Quoted 10 lines · Richard Fitzgerald

Only report a button state change if the interrupt status shows that there was a button event.

Previously the code would always drop into the button reporting at the end of interrupt handling if the jack was present. If neither of the button report interrupts were pending it would report all buttons released. This could then lead to a button being reported as released while it is still pressed.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: cs42l42: Only report button state if there was a button interrupt

      commit: ea75deef1a738d25502cfbb2caa564270b271525

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark