verdin-imx8mm: verdin-imx8mp: various additions and improvements
v2 cover verdin-imx8mm: verdin-imx8mp: various additions and improvements
From: Marcel Ziswiler <[email protected]>
Various additions and improvements for the Verdin iMX8M Mini and Verdin iMX8M Plus:
- updated env memory layout
- verdin-imx8mm: prepare for optional job ring driver model
- verdin-imx8mm: improve and extend boot devices
- various config additions and improvements
Changes in v2:
- Moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus increasing kernel_comp_size by same 0.5MB.
Marcel Ziswiler (5):
verdin-imx8mm: verdin-imx8mp: update env memory layout
verdin-imx8mm: prepare for optional job ring driver model
verdin-imx8mm: improve and extend boot devices
verdin-imx8mm: various config additions and improvements
verdin-imx8mp: various config additions and improvements
board/toradex/verdin-imx8mm/spl.c | 17 +++++++++----- configs/verdin-imx8mm_defconfig | 37 +++++++++++++++++++++++++------ configs/verdin-imx8mp_defconfig | 35 ++++++++++++++++++++++++----- include/configs/verdin-imx8mm.h | 10 +++++---- include/configs/verdin-imx8mp.h | 10 +++++---- 5 files changed, 83 insertions(+), 26 deletions(-)
Signature · 1 line
2.35.1
PATCH v2 1/5 verdin-imx8mm: verdin-imx8mp: update env memory layout
From: Marcel Ziswiler <[email protected]>
Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus:
- loadaddr=0x48280000 allows for 128.5MB area for uncompressing (ie FIT images, kernel_comp_addr_r, kernel_comp_size)
- fdt_addr_r = loadaddr + 127.5MB : allows for 127.5MB kernel
- scriptaddr = fdt_addr_r + 512KB : allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB : allows for 512KB script
Memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout") but moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus actually defining kernel_comp_size to make booti work.
Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).
---
Changes in v2:
- Moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus increasing kernel_comp_size by same 0.5MB.
configs/verdin-imx8mm_defconfig | 2 +- configs/verdin-imx8mp_defconfig | 2 +- include/configs/verdin-imx8mm.h | 10 ++++++---- include/configs/verdin-imx8mp.h | 10 ++++++---- 4 files changed, 14 insertions(+), 10 deletions(-)
configs/verdin-imx8mm_defconfig +1 -1
@@ -15,7 +15,7 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x48280000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 CONFIG_DISTRO_DEFAULTS=y
configs/verdin-imx8mp_defconfig +1 -1
@@ -21,7 +21,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 -CONFIG_SYS_LOAD_ADDR=0x43500000 +CONFIG_SYS_LOAD_ADDR=0x48280000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 CONFIG_DISTRO_DEFAULTS=y
include/configs/verdin-imx8mm.h +6 -4
@@ -20,10 +20,12 @@#endif #define MEM_LAYOUT_ENV_SETTINGS \ - "fdt_addr_r=0x44000000\0" \ - "kernel_addr_r=0x42000000\0" \ - "ramdisk_addr_r=0x46400000\0" \ - "scriptaddr=0x46000000\0" + "fdt_addr_r=0x50200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "kernel_comp_addr_r=0x40200000\0" \ + "kernel_comp_size=0x08080000\0" \ + "ramdisk_addr_r=0x50300000\0" \ + "scriptaddr=0x50280000\0"/* Enable Distro Boot */ #define BOOT_TARGET_DEVICES (func) \
include/configs/verdin-imx8mp.h +6 -4
@@ -34,10 +34,12 @@#endif /* CONFIG_CMD_NET */ #define MEM_LAYOUT_ENV_SETTINGS \ - "fdt_addr_r=0x43000000\0" \ - "kernel_addr_r=0x40000000\0" \ - "ramdisk_addr_r=0x46400000\0" \ - "scriptaddr=0x46000000\0" + "fdt_addr_r=0x50200000\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "kernel_comp_addr_r=0x40200000\0" \ + "kernel_comp_size=0x08080000\0" \ + "ramdisk_addr_r=0x50300000\0" \ + "scriptaddr=0x50280000\0"/* Enable Distro Boot */ #define BOOT_TARGET_DEVICES (func) \
Signature · 1 line
2.35.1
PATCH v2 1/5 verdin-imx8mm: verdin-imx8mp: update env memory layout
Quoted 15 lines
From: Marcel Ziswiler <[email protected]>
Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus:
- loadaddr=0x48280000 allows for 128.5MB area for uncompressing (ie FIT images,kernel_comp_addr_r,kernel_comp_size)
-fdt_addr_r= loadaddr + 127.5MB : allows for 127.5MB kernel
- scriptaddr =fdt_addr_r+ 512KB : allows for 512KB fdt
-ramdisk_addr_r= scriptaddr + 512KB : allows for 512KB script Memory layout taken from commitfd5c7173ade4("imx8m{m,n}_venice: update env memory layout") but moved loadaddr by an additional 0.5MB to avoid "Moving Image from0x48200000to0x48280000" during booti plus actually definingkernel_comp_sizeto make booti work. Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).
Quoted 1 line
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v2 2/5 verdin-imx8mm: prepare for optional job ring driver model
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
Prepare for optional job ring driver model. Sec may be initialized based on the job ring information processed from the device tree.
---
(no changes since v1)
board/toradex/verdin-imx8mm/spl.c | 9 +++++++++ 1 file changed, 9 insertions(+)
board/toradex/verdin-imx8mm/spl.c +9 -0
@@ -56,6 +56,15 @@ void spl_dram_init(void)void spl_board_init (void ) { +if (IS_ENABLED (CONFIG_FSL_CAAM )) { +struct udevice *dev; +int ret; + + ret =uclass_get_device_by_driver (UCLASS_MISC ,DM_DRIVER_GET (caam_jr), &dev); +if (ret) +printf ("Failed to initialize %s: %d\n" , dev->name, ret); + } +/* Serial download mode */ if (is_usb_boot ()) {puts ("Back to ROM, SDP\n" );
Signature · 1 line
2.35.1
PATCH v2 2/5 verdin-imx8mm: prepare for optional job ring driver model
Quoted 4 lines
From: Marcel Ziswiler <[email protected]>
Prepare for optional job ring driver model. Sec may be initialized based on the job ring information processed from the device tree.Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v2 3/5 verdin-imx8mm: improve and extend boot devices
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
- Annotate boot devices available in spl_board_boot_device().
- Drop SD3_BOOT/MMC3_BOOT not available for boot on Verdin iMX8M Mini.
---
(no changes since v1)
board/toradex/verdin-imx8mm/spl.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
board/toradex/verdin-imx8mm/spl.c +2 -6
@@ -34,14 +34,11 @@ DECLARE_GLOBAL_DATA_PTR;int spl_board_boot_device (enum boot_device boot_dev_spl) {switch (boot_dev_spl) { -case MMC1_BOOT : +case MMC1_BOOT :/* eMMC */ return BOOT_DEVICE_MMC1 ; -case SD2_BOOT : +case SD2_BOOT :/* SD card */ case MMC2_BOOT :return BOOT_DEVICE_MMC2 ; -case SD3_BOOT : -case MMC3_BOOT : -return BOOT_DEVICE_MMC1 ;case USB_BOOT :return BOOT_DEVICE_BOARD ;default :
@@ -83,7 +80,6 @@ int board_fit_config_name_match(const char *name) }#endif -__weak void board_early_init (void ) {init_uart_clk (0 );
Signature · 1 line
2.35.1
PATCH v2 3/5 verdin-imx8mm: improve and extend boot devices
Quoted 4 lines
From: Marcel Ziswiler <[email protected]>
- Annotate boot devices available inspl_board_boot_device().
- Drop SD3_BOOT/MMC3_BOOT not available for boot on Verdin iMX8M Mini.Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH v2 4/5 verdin-imx8mm: various config additions and improvements
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump
---
(no changes since v1)
configs/verdin-imx8mm_defconfig | 35 +++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-)
configs/verdin-imx8mm_defconfig +29 -6
@@ -14,10 +14,14 @@ CONFIG_TARGET_VERDIN_IMX8MM=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 CONFIG_SPL=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_SYS_LOAD_ADDR=0x48280000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 +CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -25,7 +29,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb" CONFIG_LOG=y
@@ -54,20 +58,26 @@ CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_CRC32 is not set +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y
@@ -76,11 +86,13 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" +CONFIG_ETHPRIME="eth0" CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_SPL_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y
@@ -91,12 +103,21 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y
@@ -106,7 +127,6 @@ CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_DM_PMIC=y CONFIG_SPL_DM_PMIC_PCA9450=y -CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y
@@ -117,8 +137,11 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y -# CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y CONFIG_IMX_WATCHDOG=y +CONFIG_HEXDUMP=y CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.35.1
PATCH v2 4/5 verdin-imx8mm: various config additions and improvements
Quoted 15 lines
From: Marcel Ziswiler <[email protected]>
- integrate bootcount usingSNVS_LPgeneral purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdump
Quoted 1 line
Signed-off-by Marcel Ziswiler <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Re: [PATCH v2 4/5] verdin-imx8mm: various config additions and improvements
Quoted 16 lines · On 18.09.22 22:41, [email protected] wrote:
Quoted 15 lines
From: Marcel Ziswiler <[email protected]>
- integrate bootcount usingSNVS_LPgeneral purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdumpQuoted 1 line
Signed-off-by Marcel Ziswiler <[email protected]>
Quoted 2 lines
Applied to u-boot-imx, master, thanks !
Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as I cannot then test if it is ok. These two patches are not in my PR, I can pick them up if you repost them.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Re: [PATCH v2 4/5] verdin-imx8mm: various config additions and improvements
Hi Stefano
Quoted 17 lines · Stefano Babic
Quoted 16 lines · On 18.09.22 22:41, [email protected] wrote:
Quoted 16 lines
From: Marcel Ziswiler <[email protected]>
- integrate bootcount usingSNVS_LPgeneral purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdumpSigned-off-by Marcel Ziswiler <[email protected]>
Quoted 6 lines
Quoted 2 lines
Applied to u-boot-imx, master, thanks !
Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as I cannot then test if it is ok. These two patches are not in my PR, I can pick them up if you repost them.
Sure.
Sorry, I missed this email as you missed CCing anybody else (e.g. like my work email).
Plus you probably missed this:
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/#2953792
Anyway, I will send an additional series including Patch 4/5, Patch 5/5 and fixing v2 vs. v1 (and more).
Thanks!
Quoted 2 lines
Best regards,
Stefano Babic
Cheers
Marcel
Re: [PATCH v2 4/5] verdin-imx8mm: various config additions and improvements
Quoted 23 lines · Marcel Ziswiler
Hi Stefano
Quoted 20 lines · Stefano Babic
Quoted 18 lines · On 18.09.22 22:41, [email protected] wrote:
Quoted 15 lines
From: Marcel Ziswiler <[email protected]>
- integrate bootcount usingSNVS_LPgeneral purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdumpQuoted 1 line
Signed-off-by Marcel Ziswiler <[email protected]>Applied to u-boot-imx, master, thanks !
Quoted 8 lines
Quoted 3 lines
Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as I cannot then test if it is ok. These two patches are not in my PR, I can pick them up if you repost them.
Sure.
Sorry, I missed this email as you missed CCing anybody else (e.g. like my work email).
Sorry, you're right.
Quoted 5 lines
Plus you probably missed this:
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/#2953792
Anyway, I will send an additional series including Patch 4/5, Patch 5/5 and fixing v2 vs. v1 (and more).
Thanks !
Regards,
Stefano
Quoted 9 lines
Thanks!
Quoted 2 lines
Best regards,
Stefano BabicCheers
Marcel
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Re: [PATCH v2 4/5] verdin-imx8mm: various config additions and improvements
Quoted 28 lines · Stefano Babic
Quoted 27 lines · Marcel Ziswiler
Hi Stefano
Quoted 23 lines · Stefano Babic
Quoted 16 lines · On 18.09.22 22:41, [email protected] wrote:
Quoted 15 lines
From: Marcel Ziswiler <[email protected]>
- integrate bootcount usingSNVS_LPgeneral purpose register LPGPR0
- enable link-time optimisation
- explicitly set a boot delay of one second
- enable CRC32 and MD5
- enable command for low-level access to data in a partition
- enable time commands
- enable PMIC commands
- improve ETHPRIME configuration
- enable eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- remove stale PFUZE100 PMIC driver
- enable thermal management unit driver
- enable more USB host functionality
- enable hexdumpQuoted 1 line
Signed-off-by Marcel Ziswiler <[email protected]>Quoted 2 lines
Applied to u-boot-imx, master, thanks !
Not yet: Patch 4/5 and 5/5 require a rebase, I avoid to do it myself as I cannot then test if it is ok. These two patches are not in my PR, I can pick them up if you repost them.
Quoted 12 lines
Quoted 4 lines
Sure.
Sorry, I missed this email as you missed CCing anybody else (e.g. like my work email).
Sorry, you're right.
Quoted 5 lines
Plus you probably missed this:
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/#2953792
Anyway, I will send an additional series including Patch 4/5, Patch 5/5 and fixing v2 vs. v1 (and more).
https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
Quoted 14 lines
Thanks !
Regards,
StefanoQuoted 9 lines
Thanks!
Quoted 2 lines
Best regards,
Stefano BabicCheers
Marcel
PATCH v2 5/5 verdin-imx8mp: various config additions and improvements
In reply to Marcel ZiswilerFrom: Marcel Ziswiler <[email protected]>
- integrate bootcount using SNVS_LP general purpose register LPGPR0
- enable CRC32 and MD5
- enable time commands
- enable GPIO LED support
- enable further eMMC HS400 functionality
- enable fixed PHY and MDIO driver model
- enable USB host functionality
- enable thermal management unit driver
- enable hexdump
---
(no changes since v1)
configs/verdin-imx8mp_defconfig | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-)
configs/verdin-imx8mp_defconfig +29 -4
@@ -18,7 +18,10 @@ CONFIG_TARGET_VERDIN_IMX8MP=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 CONFIG_SPL=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_IMX_BOOTAUX=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x48280000
@@ -65,7 +68,9 @@ CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_CRC32 is not set +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y
@@ -74,12 +79,14 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y CONFIG_CMD_USB=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y
@@ -97,7 +104,7 @@ CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_ENV=y +CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y CONFIG_GPIO_HOG=y
@@ -106,30 +113,39 @@ CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y CONFIG_MMC_HS400_ES_SUPPORT=y CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_DM_ETH_PHY=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY_IMX8MQ_USB=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y
@@ -141,8 +157,17 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y -# CONFIG_SPL_DM_USB is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y CONFIG_IMX_WATCHDOG=y +CONFIG_HEXDUMP=y CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.35.1
Hi there
Quoted 1 line · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Please disregard this version 2 as version 1 [1] is/was just fine. I meanwhile found out that it is actually a property of the kernel binary whether or not any additional moving/relocation will (need) to be done [2].
Thanks!
[1] https://patchwork.ozlabs.org/project/uboot/cover/[email protected]/
[2] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/lib/image.c#L48
Cheers
Marcel
Quoted 26 lines
Various additions and improvements for the Verdin iMX8M Mini and Verdin iMX8M Plus:
- updated env memory layout
- verdin-imx8mm: prepare for optional job ring driver model
- verdin-imx8mm: improve and extend boot devices
- various config additions and improvementsChanges in v2:
- Moved loadaddr by an additional 0.5MB to avoid "Moving Image from0x48200000to0x48280000" during booti plus increasingkernel_comp_sizeby same 0.5MB.Marcel Ziswiler (5):
verdin-imx8mm: verdin-imx8mp: update env memory layout
verdin-imx8mm: prepare for optional job ring driver model
verdin-imx8mm: improve and extend boot devices
verdin-imx8mm: various config additions and improvements
verdin-imx8mp: various config additions and improvementsboard/toradex/verdin-imx8mm/spl.c | 17 +++++++++-----
configs/verdin-imx8mm_defconfig | 37 +++++++++++++++++++++++++------ configs/verdin-imx8mp_defconfig | 35 ++++++++++++++++++++++++----- include/configs/verdin-imx8mm.h | 10 +++++---- include/configs/verdin-imx8mp.h | 10 +++++---- 5 files changed, 83 insertions(+), 26 deletions(-)