Make XEN_FW_EFI_MEM_INFO easier to use
PATCH 1/1 Make XEN_FW_EFI_MEM_INFO easier to use
The XEN_FW_EFI_MEM_INFO platform op has very surprising behavior: it only sets info->mem.size if the initial value was *larger* than the size of the memory region. This is not particularly useful and cost me most of a day of debugging. It also has some integer overflow problems, though as the data comes from dom0 or the firmware (both of which are trusted) these are not security issues.
Fix both of these problems by unconditionally setting the memory region size and by computing it in a way that is immune to integer overflow. The new code is slightly longer, but it is much easier to understand and use.
--- xen/common/efi/runtime.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
xen/common/efi/runtime.c +9 -7
@@ -269,19 +269,21 @@case XEN_FW_EFI_MEM_INFO :for ( i =0 ; i < efi_memmap_size; i += efi_mdesc_size ) { +uint64_t len;EFI_MEMORY_DESCRIPTOR *desc = efi_memmap + i; -u64 len = desc->NumberOfPages <<EFI_PAGE_SHIFT ; + +if ( desc->NumberOfPages > (UINT64_MAX >>EFI_PAGE_SHIFT ) ) + len =UINT64_MAX ; +else + len = desc->NumberOfPages <<EFI_PAGE_SHIFT ;if ( info->mem.addr >= desc->PhysicalStart && - info->mem.addr < desc->PhysicalStart + len ) + info->mem.addr - desc->PhysicalStart < len ) { info->mem.type = desc->Type; info->mem.attr = desc->Attribute; -if ( info->mem.addr + info->mem.size < info->mem.addr || - info->mem.addr + info->mem.size > - desc->PhysicalStart + len ) - info->mem.size = desc->PhysicalStart + len - - info->mem.addr; + info->mem.size = len - (info->mem.addr - desc->PhysicalStart); +return 0 ; } }
Signature · 3 lines
Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab
Quoted 3 lines · Demi Marie Obenour
The
XEN_FW_EFI_MEM_INFOplatform op has very surprising behavior: it only setsinfo->mem.sizeif the initial value was *larger* than the size of the memory region.
And intentionally so - the caller didn't ask for any bigger region, after all.
Quoted 4 lines
This is not particularly useful and cost me most
of a day of debugging. It also has some integer overflow problems, though as the data comes from dom0 or the firmware (both of which are trusted) these are not security issues.
I'm afraid we're trusting the firmware in this regard elsewhere as well. So if there was a need to change that, I guess it would need changing everywhere, not just here. But we trust the E820 map as well, when on non-EFI platforms, so I don't see why we would need to change that. In any event such would want to be a separate change imo.
Quoted 2 lines
Fix both of these problems by unconditionally setting the memory region size
If you were to report a larger ending address, why would you not also report a smaller starting address?
But before you go that route - I don't think we can change the API now that it has been in use this way for many years. If a "give me the full enclosing range" variant is wanted, it will need to be fully separate.
Jan
Quoted 3 lines
and by computing it in a way that is immune to integer overflow. The new code is slightly longer, but it is much easier to understand and use.
Quoted 7 lines · Jan Beulich
Quoted 3 lines · Demi Marie Obenour
The
XEN_FW_EFI_MEM_INFOplatform op has very surprising behavior: it only setsinfo->mem.sizeif the initial value was *larger* than the size of the memory region.And intentionally so - the caller didn't ask for any bigger region, after all.
That needs to be documented, then. I thought it provided the full region that contained the address.
Quoted 11 lines
Quoted 4 lines
This is not particularly useful and cost me most
of a day of debugging. It also has some integer overflow problems, though as the data comes from dom0 or the firmware (both of which are trusted) these are not security issues.I'm afraid we're trusting the firmware in this regard elsewhere as well. So if there was a need to change that, I guess it would need changing everywhere, not just here. But we trust the E820 map as well, when on non-EFI platforms, so I don't see why we would need to change that. In any event such would want to be a separate change imo.
That is valid.
Quoted 10 lines
Quoted 2 lines
Fix both of these problems by unconditionally setting the memory region size
If you were to report a larger ending address, why would you not also report a smaller starting address?
But before you go that route - I don't think we can change the API now that it has been in use this way for many years. If a "give me the full enclosing range" variant is wanted, it will need to be fully separate.
Does anyone use this API?
Signature · 3 lines
Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab
Quoted 8 lines · Demi Marie Obenour
Quoted 7 lines · Jan Beulich
Quoted 2 lines · Demi Marie Obenour
Fix both of these problems by unconditionally setting the memory region size
If you were to report a larger ending address, why would you not also report a smaller starting address?
Quoted 6 lines
Quoted 4 lines
But before you go that route - I don't think we can change the API now that it has been in use this way for many years. If a "give me the full enclosing range" variant is wanted, it will need to be fully separate.
Does anyone use this API?
The XenoLinux forward port of ours did, and upstream Linux still wrongly doesn't. The two functions efi_mem_type() and efi_mem_attributes() still wrongly fail there when running on Xen.
But how does this matter? Even if we were unaware of any users of the API, we can't know there are none.
As an aside: Something's odd with your reply. When I opened the window to write this reply, Marek and the list were put into To: (instead of Cc:) and you were dropped altogether. I can only guess that this is what Thunderbird made of the Mail-Followup-To: tag which your mail has.
Jan
Quoted 20 lines · Jan Beulich
Quoted 8 lines · Demi Marie Obenour
Quoted 7 lines · Jan Beulich
Quoted 2 lines · Demi Marie Obenour
Fix both of these problems by unconditionally setting the memory region size
If you were to report a larger ending address, why would you not also report a smaller starting address?
Quoted 6 lines
Quoted 4 lines
But before you go that route - I don't think we can change the API now that it has been in use this way for many years. If a "give me the full enclosing range" variant is wanted, it will need to be fully separate.
Does anyone use this API?
The XenoLinux forward port of ours did, and upstream Linux still wrongly doesn't. The two functions
efi_mem_type()andefi_mem_attributes()still wrongly fail there when running on Xen.
Quoted 7 lines
But how does this matter? Even if we were unaware of any users of the API, we can't know there are none.
As an aside: Something's odd with your reply. When I opened the window to write this reply, Marek and the list were put into To: (instead of Cc:) and you were dropped altogether. I can only guess that this is what Thunderbird made of the Mail-Followup-To: tag which your mail has.
Probably? Mutt generated the header because I had (incorrectly) told it that I am subscribed to xen-devel. Is it best to leave this header unset?
Signature · 3 lines
Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab
Quoted 24 lines · Demi Marie Obenour
Quoted 23 lines · Jan Beulich
Quoted 8 lines · Demi Marie Obenour
Quoted 7 lines · Jan Beulich
Quoted 2 lines · Demi Marie Obenour
Fix both of these problems by unconditionally setting the memory region size
If you were to report a larger ending address, why would you not also report a smaller starting address?
Quoted 6 lines
Quoted 4 lines
But before you go that route - I don't think we can change the API now that it has been in use this way for many years. If a "give me the full enclosing range" variant is wanted, it will need to be fully separate.
Does anyone use this API?
The XenoLinux forward port of ours did, and upstream Linux still wrongly doesn't. The two functions
efi_mem_type()andefi_mem_attributes()still wrongly fail there when running on Xen.But how does this matter? Even if we were unaware of any users of the API, we can't know there are none.
Quoted 8 lines
Quoted 4 lines
As an aside: Something's odd with your reply. When I opened the window to write this reply, Marek and the list were put into To: (instead of Cc:) and you were dropped altogether. I can only guess that this is what Thunderbird made of the Mail-Followup-To: tag which your mail has.
Probably? Mutt generated the header because I had (incorrectly) told it that I am subscribed to xen-devel. Is it best to leave this header unset?
Probably, seeing that it results in misguidance of at least on commonly used (I believe) frontend.
Jan