Max_runtime and other minor fixes
cover Max_runtime and other minor fixes
The introduction of max_runtime system shortly before the latest LTP release has caused some random timeout issues, particularly for KSM tests, sendfile09 and ioctl_sg01. This patchset fixes those issues, along with some minor improvements found during during test review.
All of these patches are independent and can be merged out of order.
Martin Doucha (10):
syscalls/pty06: Add CVE reference
cve-2017-2671: Increase max_runtime
ksm: Add max_runtime to tests
ioctl_sg01: Set unlimited max_runtime
csf_bandwidth01: Add max_runtime
copy_file_range01: Add max_runtime
perf_event_open02: Add max_runtime
readahead02: Add max_runtime
request_key03: Add max_runtime
sendfile09: Add max_runtime
testcases/cve/cve-2017-2671.c | 2 +- testcases/kernel/mem/ksm/ksm02.c | 1 + testcases/kernel/mem/ksm/ksm04.c | 1 + testcases/kernel/mem/ksm/ksm05.c | 1 + testcases/kernel/pty/pty06.c | 3 ++- testcases/kernel/sched/cfs-scheduler/cfs_bandwidth01.c | 1 + testcases/kernel/syscalls/copy_file_range/copy_file_range01.c | 1 + testcases/kernel/syscalls/ioctl/ioctl_sg01.c | 1 + testcases/kernel/syscalls/perf_event_open/perf_event_open02.c | 1 + testcases/kernel/syscalls/readahead/readahead02.c | 1 + testcases/kernel/syscalls/request_key/request_key03.c | 1 + testcases/kernel/syscalls/sendfile/sendfile09.c | 1 + 12 files changed, 13 insertions(+), 2 deletions(-)
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 1/10 syscalls/pty06: Add CVE reference
--- testcases/kernel/pty/pty06.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
testcases/kernel/pty/pty06.c +2 -1
@@ -99,7 +99,8 @@ static struct tst_test test = { .taint_check = TST_TAINT_W | TST_TAINT_D, .max_runtime = 150, .tags = (const struct tst_tag []) { - {"linux-git" ,"ca4463bf8438" }, + {"CVE" ,"2020-36557" }, + {"linux-git" ,"ca4463bf8438" }, {} } };
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 01/10] syscalls/pty06: Add CVE reference
Hi!
Applied, thanks.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 2/10 cve-2017-2671: Increase max_runtime
In reply to Martin DouchaThe current max_runtime is insufficient to finish the race. Increase it.
--- testcases/cve/cve-2017-2671.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
testcases/cve/cve-2017-2671.c +1 -1
@@ -109,7 +109,7 @@ static struct tst_test test = { .test_all = run, .cleanup = cleanup, .needs_root = 1, - .max_runtime = 20, + .max_runtime = 40, .tags = (const struct tst_tag []) { {"linux-git" ,"43a6684519ab" }, {"CVE" ,"2017-2671" },
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 02/10] cve-2017-2671: Increase max_runtime
Hi!
Applied, thanks.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 3/10 ksm: Add max_runtime to tests
In reply to Martin Douchaksm02, ksm04 and ksm05 take 10+ seconds to finish. Set max_runtime to avoid random timeout issues.
--- testcases/kernel/mem/ksm/ksm02.c | 1 + testcases/kernel/mem/ksm/ksm04.c | 1 + testcases/kernel/mem/ksm/ksm05.c | 1 + 3 files changed, 3 insertions(+)
testcases/kernel/mem/ksm/ksm02.c +1 -0
@@ -110,6 +110,7 @@ static struct tst_test test = { }, .test_all = verify_ksm, .min_kver = "2.6.32", + .max_runtime = 20, .needs_cgroup_ctrls = (const char *const []){ "cpuset", NULL }, };
testcases/kernel/mem/ksm/ksm04.c +1 -0
@@ -112,6 +112,7 @@ static struct tst_test test = { }, .test_all = verify_ksm, .min_kver = "2.6.32", + .max_runtime = 20, .needs_cgroup_ctrls = (const char *const []){"memory" ,"cpuset" ,NULL },
testcases/kernel/mem/ksm/ksm05.c +1 -0
@@ -88,6 +88,7 @@ static struct tst_test test = { .forks_child = 1, .test_all = test_ksm, .min_kver = "2.6.32", + .max_runtime = 10, .save_restore = (const struct tst_path_val []) { {"!/sys/kernel/mm/ksm/run" ,"1" }, {}
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Hi!
Quoted 2 lines
ksm02, ksm04 and ksm05 take 10+ seconds to finish. Set
max_runtimeto avoid random timeout issues.
I wonder if we can do better.
I guess that the actual runtime does depends on the size of the RAM because we wait for at least two finished full scans for ksmd. I guess that for large enough machines we would end up with minutes of runtime.
So I guess that it would make more sense to treat the max_runtime as a upper bound and set it to large enough number as we do for AIO testcases (30 minutes) and then make the wait_ksmd_full_scan() runtime avare so that it exits when the runtime is exhausted. With that we would get a clear message that we timed-out in the loop that waited for the ksmd scan.
Quoted 49 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/mem/ksm/ksm02.c | 1 + testcases/kernel/mem/ksm/ksm04.c | 1 + testcases/kernel/mem/ksm/ksm05.c | 1 + 3 files changed, 3 insertions(+)testcases/kernel/mem/ksm/ksm02.c +1
-0@@ -110,6 +110,7 @@ static struct tst_test test = { }, .test_all = verify_ksm, .min_kver = "2.6.32", + .max_runtime = 20, .needs_cgroup_ctrls = (const char *const []){ "cpuset", NULL }, };testcases/kernel/mem/ksm/ksm04.c +1
-0@@ -112,6 +112,7 @@ static struct tst_test test = { }, .test_all = verify_ksm, .min_kver = "2.6.32", + .max_runtime = 20, .needs_cgroup_ctrls = (const char *const []){"memory" ,"cpuset" ,NULL },testcases/kernel/mem/ksm/ksm05.c +1
-0@@ -88,6 +88,7 @@ static struct tst_test test = { .forks_child = 1, .test_all = test_ksm, .min_kver = "2.6.32", + .max_runtime = 10, .save_restore = (const struct tst_path_val []) { {"!/sys/kernel/mm/ksm/run" ,"1" }, {}Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Quoted 10 lines · Cyril Hrubis
Hi!
Quoted 2 lines
ksm02, ksm04 and ksm05 take 10+ seconds to finish. Set
max_runtimeto avoid random timeout issues.I wonder if we can do better.
I guess that the actual runtime does depends on the size of the RAM because we wait for at least two finished full scans for ksmd. I guess that for large enough machines we would end up with minutes of runtime.
Quoted 6 lines
So I guess that it would make more sense to treat the
max_runtimeas a upper bound and set it to large enough number as we do for AIO testcases (30 minutes) and then make thewait_ksmd_full_scan()runtime avare so that it exits when the runtime is exhausted. With that we would get a clear message that we timed-out in the loop that waited for the ksmd scan.
Alternatively, we could measure 1 full ksmd scan in setup() and then set max_runtime dynamically. Each call of create_same_memory() would need roughly 16 scan times. Time spent in ksm_child_memset() is included in that estimate.
Signature · 11 lines
Martin Doucha [email protected] QA Engineer for Software Maintenance SUSE LINUX, s.r.o. CORSO IIa Krizikova 148/34 186 00 Prague 8 Czech Republic -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Hi!
Quoted 13 lines
Quoted 6 lines
I wonder if we can do better.
I guess that the actual runtime does depends on the size of the RAM because we wait for at least two finished full scans for ksmd. I guess that for large enough machines we would end up with minutes of runtime.
Quoted 6 lines
So I guess that it would make more sense to treat the
max_runtimeas a upper bound and set it to large enough number as we do for AIO testcases (30 minutes) and then make thewait_ksmd_full_scan()runtime avare so that it exits when the runtime is exhausted. With that we would get a clear message that we timed-out in the loop that waited for the ksmd scan.
Quoted 4 lines
Alternatively, we could measure 1 full ksmd scan in
setup()and then setmax_runtimedynamically. Each call ofcreate_same_memory()would need roughly 16 scan times. Time spent inksm_child_memset()is included in that estimate.
That sounds good as well, but I would still set the .max_runtime to rough guess in tst_test structure and then adjusted it in the test setup().
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Quoted 9 lines · Cyril Hrubis
Hi!
Quoted 4 lines
Alternatively, we could measure 1 full ksmd scan in
setup()and then setmax_runtimedynamically. Each call ofcreate_same_memory()would need roughly 16 scan times. Time spent inksm_child_memset()is included in that estimate.That sounds good as well, but I would still set the .max_runtime to rough guess in
tst_teststructure and then adjusted it in the testsetup().
The current patch is a good enough guess for ~2-4GB machines. Or do you want to target bigger machines by default?
Signature · 11 lines
Martin Doucha [email protected] QA Engineer for Software Maintenance SUSE LINUX, s.r.o. CORSO IIa Krizikova 148/34 186 00 Prague 8 Czech Republic -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Quoted 7 lines · Cyril Hrubis
Quoted 5 lines
Hi!
Quoted 4 lines
Alternatively, we could measure 1 full ksmd scan in
setup()and then setmax_runtimedynamically. Each call ofcreate_same_memory()would need roughly 16 scan times. Time spent inksm_child_memset()is included in that estimate.
Quoted 6 lines
Quoted 3 lines
That sounds good as well, but I would still set the .max_runtime to rough guess in
tst_teststructure and then adjusted it in the testsetup().The current patch is a good enough guess for ~2-4GB machines. Or do you want to target bigger machines by default?
I guess it'd be safer to expect machines with bigger memory.
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 03/10] ksm: Add max_runtime to tests
Hi!
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Alternatively, we could measure 1 full ksmd scan in
setup()and then setmax_runtimedynamically. Each call ofcreate_same_memory()would need roughly 16 scan times. Time spent inksm_child_memset()is included in that estimate.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
That sounds good as well, but I would still set the .max_runtime to rough guess in
tst_teststructure and then adjusted it in the testsetup().The current patch is a good enough guess for ~2-4GB machines. Or do you want to target bigger machines by default?
I guess it'd be safer to expect machines with bigger memory.
I would just multiply the value you proposed by 10, which should be large enough default.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 4/10 ioctl_sg01: Set unlimited max_runtime
In reply to Martin DouchaTest setup can take very long time depending on the amount of free RAM. Set unlimited max_runtime to avoid timeout issues.
--- testcases/kernel/syscalls/ioctl/ioctl_sg01.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/ioctl/ioctl_sg01.c +1 -0
@@ -126,6 +126,7 @@ static struct tst_test test = { .test_all = run, .setup = setup, .cleanup = cleanup, + .max_runtime = TST_UNLIMITED_RUNTIME, .tags = (const struct tst_tag []) { {"linux-git" ,"a45b599ad808" }, {"CVE" ,"2018-1000204" },
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 04/10] ioctl_sg01: Set unlimited max_runtime
Hi!
Quoted 2 lines
Test setup can take very long time depending on the amount of free RAM. Set unlimited
max_runtimeto avoid timeout issues.
I would rather go for large enough number e.g. 30 minutes than unlimited as the unlimited runtime turns off the timeouts and such test can run undefinitely.
The unlimited runtime is really meant for unpredictable tests, such as OOM testcases.
Quoted 23 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/ioctl/ioctl_sg01.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/ioctl/ioctl_sg01.c +1
-0@@ -126,6 +126,7 @@ static struct tst_test test = { .test_all = run, .setup = setup, .cleanup = cleanup, + .max_runtime = TST_UNLIMITED_RUNTIME, .tags = (const struct tst_tag []) { {"linux-git" ,"a45b599ad808" }, {"CVE" ,"2018-1000204" },Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 04/10] ioctl_sg01: Set unlimited max_runtime
Quoted 7 lines · Cyril Hrubis
Hi!
Quoted 2 lines
Test setup can take very long time depending on the amount of free RAM. Set unlimited
max_runtimeto avoid timeout issues.I would rather go for large enough number e.g. 30 minutes than unlimited as the unlimited runtime turns off the timeouts and such test can run undefinitely.
Even setting max_runtime is an ugly hack here because the test itself is nearly instant. The setup() function is what actually times out. But there's currently no way to change the default 30 second timeout allocated for setup() and cleanup(). It'd be much better if I could set that setup() has unlimited timeout and the test itself is limited to 5 seconds.
Signature · 11 lines
Martin Doucha [email protected] QA Engineer for Software Maintenance SUSE LINUX, s.r.o. CORSO IIa Krizikova 148/34 186 00 Prague 8 Czech Republic -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 04/10] ioctl_sg01: Set unlimited max_runtime
Hi!
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines
Test setup can take very long time depending on the amount of free RAM. Set unlimited
max_runtimeto avoid timeout issues.I would rather go for large enough number e.g. 30 minutes than unlimited as the unlimited runtime turns off the timeouts and such test can run undefinitely.
Quoted 6 lines
Even setting
max_runtimeis an ugly hack here because the test itself is nearly instant. Thesetup()function is what actually times out. But there's currently no way to change the default 30 second timeout allocated forsetup()andcleanup(). It'd be much better if I could set thatsetup()has unlimited timeout and the test itself is limited to 5 seconds.
I guess that we can add setup_max_runtime and cleanup_max_runtime however I would still set the setup_max_runtime to a large but finite value here.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 5/10 csf_bandwidth01: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/sched/cfs-scheduler/cfs_bandwidth01.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/sched/cfs-scheduler/cfs_bandwidth01.c +1 -0
@@ -170,6 +170,7 @@ static struct tst_test test = { .cleanup = cleanup, .forks_child = 1, .needs_checkpoints = 1, + .max_runtime = 20, .taint_check = TST_TAINT_W | TST_TAINT_D, .needs_kconfigs = (const char *[]) {"CONFIG_CFS_BANDWIDTH" ,
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 05/10] csf_bandwidth01: Add max_runtime
Hi!
Applied, thanks.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 6/10 copy_file_range01: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/syscalls/copy_file_range/copy_file_range01.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/copy_file_range/copy_file_range01.c +1 -0
@@ -232,4 +232,5 @@ static struct tst_test test = { .all_filesystems = 1, .test = copy_file_range_verify, .test_variants = TEST_VARIANTS, + .max_runtime = 20 };
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
Hi Martin,
LGTM (test uses all_filesystems, but 20 for all possible filesystems should be OK).
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
Hi!
Quoted 1 line
LGTM (test uses
all_filesystems, but 20 for all possible filesystems should be OK).
The runtime applies per single call of the run() function.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
Quoted 4 lines
Hi!
Quoted 1 line
LGTM (test uses
all_filesystems, but 20 for all possible filesystems should be OK).The runtime applies per single call of the
run()function.
Thanks for a hint Cyril. I didn't read the sources correctly before. Now I see alarm(results->timeout) in fork_testrun() which is called for each filesystem.
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
In reply to Petr VorelQuoted 3 lines · Petr Vorel
Hi Martin,
LGTM (test uses
all_filesystems, but 20 for all possible filesystems should be OK).
Hmm, I've missed the .all_filesystems setting here. In that case the test should take ~2 seconds per filesystems and the patch is not needed. Feel free to discard it then.
Signature · 11 lines
Martin Doucha [email protected] QA Engineer for Software Maintenance SUSE LINUX, s.r.o. CORSO IIa Krizikova 148/34 186 00 Prague 8 Czech Republic -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
Hi!
Quoted 4 lines
Quoted 1 line
LGTM (test uses
all_filesystems, but 20 for all possible filesystems should be OK).Hmm, I've missed the .all_filesystems setting here. In that case the test should take ~2 seconds per filesystems and the patch is not needed. Feel free to discard it then.
I would still vote for adding something as .max_runtime = 5 or something like this so that it's obvious that the test can run for a few seconds per run() call especially on slower disks.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
Quoted 9 lines
Hi!
Quoted 4 lines
Quoted 1 line
LGTM (test uses
all_filesystems, but 20 for all possible filesystems should be OK).Hmm, I've missed the .all_filesystems setting here. In that case the test should take ~2 seconds per filesystems and the patch is not needed. Feel free to discard it then.
I would still vote for adding something as .max_runtime = 5 or something like this so that it's obvious that the test can run for a few seconds per
run()call especially on slower disks.
+1
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 06/10] copy_file_range01: Add max_runtime
In reply to Martin DouchaHi!
Quoted 10 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/copy_file_range/copy_file_range01.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/copy_file_range/copy_file_range01.c +0
-0
testcases/kernel/syscalls/copy_file_range/copy_file_range01.c static struct tst_test test = { · line 236
Quoted 5 lines
testcases/kernel/syscalls/copy_file_range/copy_file_range01.c +1
-0@@ -232,4 +232,5 @@ static struct tst_test test = { .all_filesystems = 1, .test = copy_file_range_verify, .test_variants = TEST_VARIANTS, + .max_runtime = 20 };
I would still make the loops that copy and read the data runtime aware to make the error messages more obvious. In the case that you want to keep TBROK return value it would be:
testcases/kernel/syscalls/copy_file_range/copy_file_range01.c +8 -0
@@ -52,6 +52,10 @@ static int check_file_content(const char *fname1, const char *fname2, ch1 =getc (fp1); ch2 =getc (fp2); count++; + +if (!(count%100 ) && !tst_remaining_runtime ()) +tst_brk (TBROK ,"Out of runtime, exiting" ); + }while ((count < len) && (ch1 == ch2));SAFE_FCLOSE (fp1);
@@ -135,6 +139,9 @@ static void test_one(size_t len, loff_t *off_in, loff_t *off_out, char *path)return ; } +if (!tst_remaining_runtime ()) +tst_brk (TBROK ,"Out of runtime, exiting" ); + to_copy -=TST_RET ; }while (to_copy >0 );
@@ -230,6 +237,7 @@ static struct tst_test test = { .mount_device = 1, .mntpoint = MNTPOINT, .all_filesystems = 1, + .max_runtime = 20, .test = copy_file_range_verify, .test_variants = TEST_VARIANTS, };
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 7/10 perf_event_open02: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/syscalls/perf_event_open/perf_event_open02.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/perf_event_open/perf_event_open02.c +1 -0
@@ -334,4 +334,5 @@ static struct tst_test test = { }, .test_all = verify, .needs_root = 1, + .max_runtime = 15 };
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 07/10] perf_event_open02: Add max_runtime
Hi,
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 07/10] perf_event_open02: Add max_runtime
In reply to Martin DouchaHi!
Quoted 10 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/perf_event_open/perf_event_open02.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/perf_event_open/perf_event_open02.c +0
-0
testcases/kernel/syscalls/perf_event_open/perf_event_open02.c static struct tst_test test = { · line 338
Quoted 5 lines
testcases/kernel/syscalls/perf_event_open/perf_event_open02.c +1
-0@@ -334,4 +334,5 @@ static struct tst_test test = { }, .test_all = verify, .needs_root = 1, + .max_runtime = 15 };
We do spend significant part of the runtime in the setup while we count hardware counters so if we are going to add .setup_max_runtime this should something as:
..
.setup_max_runtime = 64, .max_runtime = 8,
...
Technically the maximal time the setup can run is MAX_CTRS * 2 but I do not think that we will see hardware with more than 32 hardware counters anytime soon if ever.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 8/10 readahead02: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/syscalls/readahead/readahead02.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/readahead/readahead02.c +1 -0
@@ -406,6 +406,7 @@ static struct tst_test test = { }, .test = test_readahead, .tcnt = ARRAY_SIZE(tcases), + .max_runtime = 30, .tags = (const struct tst_tag []) { {"linux-git" ,"b833a3660394" }, {"linux-git" ,"5b910bd615ba" },
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 08/10] readahead02: Add max_runtime
Hi Martin,
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 08/10] readahead02: Add max_runtime
In reply to Martin DouchaHi!
Quoted 10 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/readahead/readahead02.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/readahead/readahead02.c +0
-0
testcases/kernel/syscalls/readahead/readahead02.c static struct tst_test test = { · line 412
Quoted 7 lines
testcases/kernel/syscalls/readahead/readahead02.c +1
-0@@ -406,6 +406,7 @@ static struct tst_test test = { }, .test = test_readahead, .tcnt = ARRAY_SIZE(tcases), + .max_runtime = 30, .tags = (const struct tst_tag []) { {"linux-git" ,"b833a3660394" }, {"linux-git" ,"5b910bd615ba" },
There are actually couple of things to consider here. First of all the testfile_size defaults to 64MB but it can be changed by a command line parameter, so we can easily overrun the 30 seconds by asking for large enough file. The best solution would be to add runtime 30 seconds as this patch does but if user passes -s parameter adjust the runtime in the test setup as well. Something as (30 * size / 64_MB) should be better than nothing.
However as we run the test with a loop device it will fail with ENOSPC if we pass -s bigger than the loop device, we should at least check if the device is large enough in the test setup too.
Also as we run the test inside a loop device I guess that we can also sync and drop caches just for the device, which should be faster than syncing and dropping the whole system. Possibly we just need to umount it and mount it again.
And lastly we should as well use tst_parse_filesize() so that we can pass -s 128M but that is very minor.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 9/10 request_key03: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/syscalls/request_key/request_key03.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/request_key/request_key03.c +1 -0
@@ -182,6 +182,7 @@ static void do_test(void)static struct tst_test test = { .test_all = do_test, .forks_child =1 , + .max_runtime =10 , .options = (struct tst_option []) { {"b:" , &opt_bug,"Bug to test for (cve-2017-15299 or cve-2017-15951; default is both)" }, {}
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 09/10] request_key03: Add max_runtime
Hi Martin,
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 09/10] request_key03: Add max_runtime
In reply to Martin DouchaHi Martin,
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 09/10] request_key03: Add max_runtime
In reply to Martin DouchaHi!
Quoted 10 lines
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/request_key/request_key03.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/request_key/request_key03.c +0
-0
testcases/kernel/syscalls/request_key/request_key03.c static void do_test(void) · line 188
Quoted 7 lines
testcases/kernel/syscalls/request_key/request_key03.c +1
-0@@ -182,6 +182,7 @@ static void do_test(void)static struct tst_test test = { .test_all = do_test, .forks_child =1 , + .max_runtime =10 , .options = (struct tst_option []) { {"b:" , &opt_bug,"Bug to test for (cve-2017-15299 or cve-2017-15951; default is both)" }, {}
First of all I would split the do_test() into three subtest by setting .test and .tcnt = 3 so that we can apply the max_runtime per one call of the test_with_key_type(). Then we can make the test_with_key_type() runtime aware. I guess that we can just spin both of the children until they consume a defined portion of runtime.
Signature · 5 lines
Cyril Hrubis [email protected] -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH 10/10 sendfile09: Add max_runtime
In reply to Martin Doucha--- testcases/kernel/syscalls/sendfile/sendfile09.c | 1 + 1 file changed, 1 insertion(+)
testcases/kernel/syscalls/sendfile/sendfile09.c +1 -0
@@ -97,6 +97,7 @@ static struct tst_test test = { .test = run, .tcnt = ARRAY_SIZE(tc), .min_kver = "2.6.33", + .max_runtime = 20, .tags = (const struct tst_tag []) { {"linux-git" ,"5d73320a96fcc" }, {}
Signature · 5 lines
2.37.2 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 10/10] sendfile09: Add max_runtime
Hi Martin,
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH 10/10] sendfile09: Add max_runtime
In reply to Martin DouchaQuoted 11 lines · Martin Doucha
Signed-off-by Martin Doucha <[email protected]>--- testcases/kernel/syscalls/sendfile/sendfile09.c | 1 + 1 file changed, 1 insertion(+)testcases/kernel/syscalls/sendfile/sendfile09.c +0
-0
testcases/kernel/syscalls/sendfile/sendfile09.c static struct tst_test test = { · line 100
Quoted 4 lines
testcases/kernel/syscalls/sendfile/sendfile09.c +1
-0@@ -97,6 +97,7 @@ static struct tst_test test = { .test = run, .tcnt = ARRAY_SIZE(tc), .min_kver = "2.6.33", + .max_runtime = 20,
I already saw reports of this timing out with 60 second timeout on bare metal, so I'd go with higher value:
tst_test.c:1526: TINFO: Timeout per run is 0h 01m 00s Test timeouted, sending SIGKILL!
tst_test.c:1577: TINFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1
tst_test.c:1579: TBROK: Test killed! (timeout?)
Quoted 10 lines
testcases/kernel/syscalls/sendfile/sendfile09.c +0
-1.tags = (const struct tst_tag[]) { {"linux-git" ,"5d73320a96fcc" }, {} --2.37.2
--
Mailing list info: https://lists.linux.it/listinfo/ltp
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp