add trac reg to tx done
RFC 1/1 add trac reg to tx done
This patch adds an additional byte for tx done for the trac status register which can then evaluated by the atusb Linux driver.
---
Just an RFC, need another weekend to test it.
atusb/fw/mac.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
atusb/fw/mac.c +10 -4
@@ -32,7 +32,7 @@ static uint8_t tx_buf[MAX_PSDU];static uint8_t tx_size =0 ;static bool txing =0 ;static bool queued_tx_ack =0 ; -static uint8_t next_seq, this_seq, queued_seq; +static uint8_t next_seq, this_seq, queued_seq, queued_tx_trac;/* ----- Receive buffer management ----------------------------------------- */
@@ -57,6 +57,7 @@ static void tx_ack_done(void *user);static void usb_next (void ) {const uint8_t *buf; +uint8_t data[2 ];if (rx_in != rx_out) { buf = rx_buf[rx_out];
@@ -65,7 +66,9 @@ static void usb_next(void) }if (queued_tx_ack) { -usb_send (&eps[1 ], &queued_seq,1 , tx_ack_done,NULL ); + data[0 ] = queued_seq; + data[1 ] = queued_tx_trac; +usb_send (&eps[1 ], data,sizeof (data), tx_ack_done,NULL ); queued_tx_ack =0 ; } }
@@ -116,7 +119,7 @@ static void receive_frame(void)static bool handle_irq (void ) { -uint8_t irq; +uint8_t irq, data[2 ]; irq =reg_read (REG_IRQ_STATUS );if (!(irq &IRQ_TRX_END ))
@@ -124,10 +127,13 @@ static bool handle_irq(void)if (txing) {if (eps[1 ].state ==EP_IDLE ) { -usb_send (&eps[1 ], &this_seq,1 , tx_ack_done,NULL ); + data[0 ] = this_seq; + data[1 ] =reg_read (REG_TRX_STATE ); +usb_send (&eps[1 ], data,sizeof (data), tx_ack_done,NULL ); }else { queued_tx_ack =1 ; queued_seq = this_seq; + queued_tx_trac =reg_read (REG_TRX_STATE ); } txing =0 ;return 1 ;
Signature · 1 line
2.31.1
Hi,
Quoted 55 lines · Alexander Aring
This patch adds an additional byte for tx done for the trac status register which can then evaluated by the atusb Linux driver.
---Just an RFC, need another weekend to test it.
atusb/fw/mac.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)atusb/fw/mac.c +6
-3@@ -32,7 +32,7 @@ static uint8_t tx_buf[MAX_PSDU];static uint8_t tx_size =0 ;static bool txing =0 ;static bool queued_tx_ack =0 ; -static uint8_t next_seq, this_seq, queued_seq; +static uint8_t next_seq, this_seq, queued_seq, queued_tx_trac;/* ----- Receive buffer management ----------------------------------------- */ @@ -57,6 +57,7 @@ static void tx_ack_done(void *user);static void usb_next (void ) {const uint8_t *buf; +uint8_t data[2 ];if (rx_in != rx_out) { buf = rx_buf[rx_out];@@ -65,7 +66,9 @@ static void usb_next(void) }if (queued_tx_ack) { -usb_send (&eps[1 ], &queued_seq,1 , tx_ack_done,NULL ); + data[0 ] = queued_seq; + data[1 ] = queued_tx_trac; +usb_send (&eps[1 ], data,sizeof (data), tx_ack_done,NULL ); queued_tx_ack =0 ; } }@@ -116,7 +119,7 @@ static void receive_frame(void)static bool handle_irq (void ) { -uint8_t irq; +uint8_t irq, data[2 ]; irq =reg_read (REG_IRQ_STATUS );if (!(irq &IRQ_TRX_END ))@@ -124,10 +127,13 @@ static bool handle_irq(void)if (txing) {if (eps[1 ].state ==EP_IDLE ) {
atusb/fw/mac.c static bool handle_irq(void) · line 138
Quoted 10 lines
atusb/fw/mac.c +4
-1-usb_send (&eps[1 ], &this_seq,1 , tx_ack_done,NULL ); + data[0 ] = this_seq; + data[1 ] =reg_read (REG_TRX_STATE ); +usb_send (&eps[1 ], data,sizeof (data), tx_ack_done,NULL ); }else { queued_tx_ack =1 ; queued_seq = this_seq; + queued_tx_trac =reg_read (REG_TRX_STATE ); } txing =0 ;
There is probably some race the trac register also have values stored for RX_AACK_ON state which is being changed after the transmit but we need at first to get the trac and then turn into RX_AACK_ON, so I think the state change "change_state(TRX_CMD_RX_AACK_ON);" should be moved after reading the trac.
- Alex