gpio: ftgpio010: Add support for Faraday Technology FTGPIO010
PATCH v3 1/1 gpio: ftgpio010: Add support for Faraday Technology FTGPIO010
Add Faraday Technology's FTGPIO010 controller driver.
---
v2 -> v3:
Implement .get_function to make "gpio status" command work.
v1 -> v2:
Replace setbits_le32() with a simpler function out_le32(). Replace readl() with in_le32() to respect endianness.
drivers/gpio/Kconfig | 6 +++ drivers/gpio/Makefile | 1 + drivers/gpio/ftgpio010.c | 111 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 118 insertions(+) create mode 100644 drivers/gpio/ftgpio010.c
drivers/gpio/Kconfig +6 -0
@@ -605,4 +605,10 @@ config TURRIS_OMNIA_MCU help Support for GPIOs on MCU connected to Turris Omnia via i2c. +config FTGPIO010 + bool "Faraday Technology FTGPIO010 driver" + depends on DM_GPIO + help + Support for GPIOs on Faraday Technology's FTGPIO010 controller. + endif
drivers/gpio/Makefile +1 -0
@@ -75,3 +75,4 @@ obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o obj-$(CONFIG_$(SPL_TPL_)TURRIS_OMNIA_MCU) += turris_omnia_mcu.o +obj-$(CONFIG_FTGPIO010) += ftgpio010.o
drivers/gpio/ftgpio010.c new file +111 -0
111 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 11 lines · Sergei Antonov
Add Faraday Technology's FTGPIO010 controller driver.
Signed-off-by Sergei Antonov <[email protected]>---
v2 -> v3:
Implement .get_function to make "gpio status" command work.v1 -> v2:
Replacesetbits_le32()with a simpler functionout_le32(). Replacereadl()within_le32()to respect endianness.
+andre.przywara
+pali
+sr
+samuel
Hello! There has been no feedback to this patch. Anyone? I think it is ready to be committed.
Quoted 18 lines · On Friday 07 October 2022 12:27:43 Sergei Antonov wrote:
Quoted 11 lines · Sergei Antonov
Add Faraday Technology's FTGPIO010 controller driver.
Signed-off-by Sergei Antonov <[email protected]>---
v2 -> v3:
Implement .get_function to make "gpio status" command work.v1 -> v2:
Replacesetbits_le32()with a simpler functionout_le32(). Replacereadl()within_le32()to respect endianness.(quoted diff) +4
-0+andre.przywara +pali +sr +samuel
Quoted 2 lines
Hello! There has been no feedback to this patch. Anyone? I think it is ready to be committed.
I have already sent feedback for ftgpio010.c:
https://lore.kernel.org/u-boot/20220904102653.3vconq3kdegki34s@pali/t/#u
How many times should I repeat it? I'm really not maintainer of ftgpio010.c driver, nor of gpio. So please do not send me emails about ftgpio010.c if you do not have really good reason.
Quoted 3 lines · Sergei Antonov
Add Faraday Technology's FTGPIO010 controller driver.
Signed-off-by Sergei Antonov <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom