Skip to contentSkip to conversation

drm/rockchip: vop2: Fix Null Pointer Dereference on Multiple VPs

PATCH In review Chris Morgan 5 participants 10 messages Sep 12, 2022 – Sep 26, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/rockchip: vop2: Fix Null Pointer Dereference on Multiple VPs

From: Chris Morgan <[email protected]>

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -14
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}
-
 		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
 			vp = find_vp_without_primary(vop2);
 			if (vp) {
Signature · 1 line
2.25.1
#1 lore raw

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 114 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -14
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}
-
 		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
 			vp = find_vp_without_primary(vop2);
 			if (vp) {
#2 lore raw
Quoted 125 lines

Wiadomość napisana przez Michael Riesch <[email protected]> w dniu 13.09.2022, o godz. 08:55:

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 111 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")

---
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------

1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -14
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}
-
Quoted 8 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2294

Quoted 3 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
 		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
 			vp = find_vp_without_primary(vop2);
 			if (vp) {

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Chris, Michael,

IIRC this is fix for issue reported by me here: https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mf29d19089fefcd27995a93c886f65132b6c75c7c <https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mf29d19089fefcd27995a93c886f65132b6c75c7c>

#3 lore raw
Quoted 135 lines · Piotr Oniszczuk
Quoted 125 lines

Wiadomość napisana przez Michael Riesch <[email protected]> w dniu 13.09.2022, o godz. 08:55:

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 111 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")

---
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------

1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -14
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}
-
Quoted 8 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2294

Quoted 3 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
 		if (win->type == DRM_PLANE_TYPE_PRIMARY) {
 			vp = find_vp_without_primary(vop2);
 			if (vp) {

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Quoted 3 lines

Chris, Michael,

IIRC this is fix for issue reported by me here: https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mf29d19089fefcd27995a93c886f65132b6c75c7c <https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mf29d19089fefcd27995a93c886f65132b6c75c7c>

I think this actually clarifies a bit of what I'm seeing. Specifically I see nothing sometimes when I try to do a kmscube on my DSI panel. Order of video ports matters, as if the DSI is VP0 and the HDMI is VP1 I see the output on the screen, but if HDMI is VP0 and DSI is VP1 I see nothing on the screen.

As to the null pointer exception, some previous tracing suggested it was occuring because a 2nd crtc would attempt to be registered with planes when the plane was null. Basically with 1 primary plane we would only ever assign it to the first video port. However, we'd try to run drm_crtc_init_with_planes on the second video port later with no plane and it would throw the above null pointer dereference error.

I'm wondering (talking out loud mostly because I honestly am not very familiar with DRM) if in this case we should have 1 CRTC per primary plane instead of 1 CRTC per video port?

Thank you, sorry for all the trouble this is causing.

Quoted 1 line
#4 lore raw
In reply to Michael Riesch
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I looked over the VOP2 driver and haven't found the cause for the crash. I found another issue though which might bite you later. At some point we do a:

	drm_plane_create_zpos_property(&win->base, win->win_id, 0,
				       vop2->registered_num_wins - 1);

registered_num_wins is the total number of windows present in the system. What we should use here instead is the number of windows that are actually registered which would be 3 windows less in the RK3566 case.

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#5 lore raw
Quoted 130 lines · Sascha Hauer
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

Quoted 5 lines

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I'll tell you what I "think" is causing the null pointer deref, but like always I reserve the right to be wrong.

The driver checks for the primary planes and assigns them to active video ports. For the rk3566 it's skipping the 3 planes mentioned above for the RK3566. As a result if there is more than 1 active video port for the rk3566 (or more than 2 for the rk3568 I'm assuming) it doesn't set vp->primary_plane = win for that port. Slightly below that it iterates through the active video ports again and runs drm_crtc_init_with_planes on them. Only in this case one of the ports doesn't have a plane, which is where it does the null pointer deref, because the plane is null.

Quoted 5 lines

I looked over the VOP2 driver and haven't found the cause for the crash. I found another issue though which might bite you later. At some point we do a:

Quoted 7 lines
	drm_plane_create_zpos_property(&win->base, win->win_id, 0,
				       vop2->registered_num_wins - 1);

registered_num_wins is the total number of windows present in the system. What we should use here instead is the number of windows that are actually registered which would be 3 windows less in the RK3566 case.

Should we just set it right in rockchip_vop2_reg.c? The vop2_win_data it is using for the rk3566 is identical to the rk3568, but should it be?

I'll level with you, I'm out of my element trying to solve a problem with a board that has both a DSI and HDMI output. If I try to use the DSI and HDMI output on the same video port, the HDMI sets the DCLK_VOPx (where x is whichever port) to 24000000, and as a result the panel is displayed wrong. I'm pretty sure I'm not going to be able to simultaneously display an image on the DSI panel and the HDMI (though if I could that would be cool), but I'd like to have them both enabled so I can switch between them. For now I can get it to work if I put them on different video ports, of course that means I have to either disable the HDMI or remove the code listed in this "fix". It should be noted that I can now confirm that while this fixes the null pointer dereference it brings back some of the issues you found earlier in testing, so obviously this isn't the right way to do it and I'm withdrawing this as a patch.

Thank you.

Quoted 8 lines

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&amp;data=05%7C01%7C%7C9417cf2acb5f4ce2823b08da961d4ab1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637987349870888766%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=7KQyfEKfXdLQDdz6y5HIffVY5Tj8%2BthwPWMJRS6eTDE%3D&amp;reserved=0  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#6 lore raw
Quoted 140 lines · Chris Morgan
Quoted 130 lines · Sascha Hauer
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

Quoted 5 lines

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I'll tell you what I "think" is causing the null pointer deref, but like always I reserve the right to be wrong.

Quoted 9 lines

The driver checks for the primary planes and assigns them to active video ports. For the rk3566 it's skipping the 3 planes mentioned above for the RK3566. As a result if there is more than 1 active video port for the rk3566 (or more than 2 for the rk3568 I'm assuming) it doesn't set vp->primary_plane = win for that port. Slightly below that it iterates through the active video ports again and runs drm_crtc_init_with_planes on them. Only in this case one of the ports doesn't have a plane, which is where it does the null pointer deref, because the plane is null.

Yes, you're right, that is likely the problem.

On RK3568 we have four windows that could serve as primary plane, so there's enough for each of the three VPs. On RK3566 we only have two windows, so once we use more than two active VPs we are running out of primary planes.

I am writing these numbers because I think Esmart0-win0 could be used as primary plane, but is marked as DRM_PLANE_TYPE_OVERLAY in rk3568_vop_win_data[]. See the attached patch, if that's the problem it should resolve your issue.

That is not enough though once three VPs are active on RK3566. The Cluster windows could likely be used as primary planes as well, they are probably just not marked as such because they only support AFBC modes.

Sascha

-------------------------8<-------------------------

From f98f53565ce868811581afbb18451dfea2646b07 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <[email protected]>
Date: Wed, 14 Sep 2022 15:27:51 +0200
Subject: [PATCH] drm/rockchip: vop2: Register Esmart0-win0 as primary plane

Esmart0-win0 could serve as primary plane, so mark it as such. On RK3568 this window will never be used as primary plane, because the three windows at the beginning of the rk3568_vop_win_data[] array will be used. On RK3566 however, two of the windows at the beginning of the rk3568_vop_win_data[] array cannot not be used, so we end up without primary planes when multiple VPs are active.

---
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/rockchip/rockchip_vop2_reg.c +1 -1
index 9bf0637bf8e26..9d30aa73b5422 100644
@@ -188,7 +188,7 @@ static const struct vop2_win_data rk3568_vop_win_data[] = {
 		.base = 0x1800,
 		.layer_sel_id = 2,
 		.supported_rotations = DRM_MODE_REFLECT_Y,
-		.type = DRM_PLANE_TYPE_OVERLAY,
+		.type = DRM_PLANE_TYPE_PRIMARY,
 		.max_upscale_factor = 8,
 		.max_downscale_factor = 8,
 		.dly = { 20, 47, 41 },
Signature · 8 lines
2.30.2


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#7 lore raw
Quoted 151 lines · Sascha Hauer
Quoted 140 lines · Chris Morgan
Quoted 130 lines · Sascha Hauer
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

Quoted 5 lines

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I'll tell you what I "think" is causing the null pointer deref, but like always I reserve the right to be wrong.

Quoted 9 lines

The driver checks for the primary planes and assigns them to active video ports. For the rk3566 it's skipping the 3 planes mentioned above for the RK3566. As a result if there is more than 1 active video port for the rk3566 (or more than 2 for the rk3568 I'm assuming) it doesn't set vp->primary_plane = win for that port. Slightly below that it iterates through the active video ports again and runs drm_crtc_init_with_planes on them. Only in this case one of the ports doesn't have a plane, which is where it does the null pointer deref, because the plane is null.

Quoted 6 lines

Yes, you're right, that is likely the problem.

On RK3568 we have four windows that could serve as primary plane, so there's enough for each of the three VPs. On RK3566 we only have two windows, so once we use more than two active VPs we are running out of primary planes.

The datasheet states that it supports up to 2 simultaneous displays, so I think a hard limit of 2 VPs is fine for the rk3566.

Quoted 5 lines

I am writing these numbers because I think Esmart0-win0 could be used as primary plane, but is marked as DRM_PLANE_TYPE_OVERLAY in rk3568_vop_win_data[]. See the attached patch, if that's the problem it should resolve your issue.

This patch did indeed resolve my issue, and also allowed me to get both HDMI and DSI working simultaneously. It's not perfect (right now I'm displaying a 640x480 image on a 1080p display since my DSI panel runs at 640x480), but it works and that's great.

Quoted 48 lines

That is not enough though once three VPs are active on RK3566. The Cluster windows could likely be used as primary planes as well, they are probably just not marked as such because they only support AFBC modes.

Sascha

-------------------------8<-------------------------

From f98f53565ce868811581afbb18451dfea2646b07 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <[email protected]>
Date: Wed, 14 Sep 2022 15:27:51 +0200
Subject: [PATCH] drm/rockchip: vop2: Register Esmart0-win0 as primary plane

Esmart0-win0 could serve as primary plane, so mark it as such. On RK3568 this window will never be used as primary plane, because the three windows at the beginning of the rk3568_vop_win_data[] array will be used. On RK3566 however, two of the windows at the beginning of the rk3568_vop_win_data[] array cannot not be used, so we end up without primary planes when multiple VPs are active.

---
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/rockchip/rockchip_vop2_reg.c +1 -1
index 9bf0637bf8e26..9d30aa73b5422 100644
@@ -188,7 +188,7 @@ static const struct vop2_win_data rk3568_vop_win_data[] = {
 		.base = 0x1800,
 		.layer_sel_id = 2,
 		.supported_rotations = DRM_MODE_REFLECT_Y,
-		.type = DRM_PLANE_TYPE_OVERLAY,
+		.type = DRM_PLANE_TYPE_PRIMARY,
 		.max_upscale_factor = 8,
 		.max_downscale_factor = 8,
 		.dly = { 20, 47, 41 },
Signature · 8 lines
2.30.2


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&amp;data=05%7C01%7C%7Cc218aa7fea7b48286e2508da965601a4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637987593394560183%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=b5aS8NGLknpQIax9gC474MTU9CHKJOgnUq28AXFH6MM%3D&amp;reserved=0  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#8 lore raw
Quoted 168 lines · Chris Morgan
Quoted 151 lines · Sascha Hauer
Quoted 140 lines · Chris Morgan
Quoted 130 lines · Sascha Hauer
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

Quoted 5 lines

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I'll tell you what I "think" is causing the null pointer deref, but like always I reserve the right to be wrong.

Quoted 9 lines

The driver checks for the primary planes and assigns them to active video ports. For the rk3566 it's skipping the 3 planes mentioned above for the RK3566. As a result if there is more than 1 active video port for the rk3566 (or more than 2 for the rk3568 I'm assuming) it doesn't set vp->primary_plane = win for that port. Slightly below that it iterates through the active video ports again and runs drm_crtc_init_with_planes on them. Only in this case one of the ports doesn't have a plane, which is where it does the null pointer deref, because the plane is null.

Quoted 6 lines

Yes, you're right, that is likely the problem.

On RK3568 we have four windows that could serve as primary plane, so there's enough for each of the three VPs. On RK3566 we only have two windows, so once we use more than two active VPs we are running out of primary planes.

The datasheet states that it supports up to 2 simultaneous displays, so I think a hard limit of 2 VPs is fine for the rk3566.

Quoted 5 lines

I am writing these numbers because I think Esmart0-win0 could be used as primary plane, but is marked as DRM_PLANE_TYPE_OVERLAY in rk3568_vop_win_data[]. See the attached patch, if that's the problem it should resolve your issue.

Quoted 4 lines

This patch did indeed resolve my issue, and also allowed me to get both HDMI and DSI working simultaneously. It's not perfect (right now I'm displaying a 640x480 image on a 1080p display since my DSI panel runs at 640x480), but it works and that's great.

I just sent this patch for inclusion. Could you provide your formal
tested-by: tag?

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#9 lore raw
Quoted 174 lines · Sascha Hauer
Quoted 168 lines · Chris Morgan
Quoted 151 lines · Sascha Hauer
Quoted 140 lines · Chris Morgan
Quoted 130 lines · Sascha Hauer
Quoted 107 lines · Michael Riesch

Hi,

Quoted 1 line · Chris Morgan

From: Chris Morgan <[email protected]>

Cc Sascha -> any thoughts on this one?

Best regards,
Michael

Quoted 97 lines

If I use more than one VP to output on an RK3566 based device I receive the following error (and then everything freezes):

[    0.838375] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000250
[    0.839191] Mem abort info:
[    0.839442]   ESR = 0x0000000096000005
[    0.839785]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.840256]   SET = 0, FnV = 0
[    0.840530]   EA = 0, S1PTW = 0
[    0.840821]   FSC = 0x05: level 1 translation fault
[    0.841254] Data abort info:
[    0.841512]   ISV = 0, ISS = 0x00000005
[    0.841864]   CM = 0, WnR = 0
[    0.842130] [0000000000000250] user address but active_mm is swapper
[    0.842704] Internal error: Oops: 96000005 [#1] SMP
[    0.843139] Modules linked in:
[    0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
[    0.844013] Hardware name: RG503 (DT)
[    0.844343] Workqueue: events_unbound deferred_probe_work_func
[    0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
[    0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
[    0.846399] sp : ffffffc00a7a3710
[    0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27: ffffffc00a7a37a0
[    0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24: ffffffc0097d01c7
[    0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21: 0000000000000008
[    0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18: 0000000000000000
[    0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15: 08000000000000c1
[    0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12: 3231564e36314742
[    0.850509] x11: 3631475234324742 x10: 000000000000002d x9 : ffffffc008682004
[    0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 : ffffffc00a7a37a0
[    0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 : 0000000000000000
[    0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 : ffffff80010d0800
[    0.853048] Call trace:
[    0.853270]  __drm_crtc_init_with_planes+0x48/0x2e4
[    0.853706]  drm_crtc_init_with_planes+0x68/0x94
[    0.854118]  vop2_bind+0x89c/0x920
[    0.854429]  component_bind_all+0x18c/0x290
[    0.854805]  rockchip_drm_bind+0xe4/0x1f0
[    0.855166]  try_to_bring_up_aggregate_device+0x9c/0x290
[    0.855639]  __component_add+0x110/0x168
[    0.855991]  component_add+0x1c/0x28
[    0.856312]  dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
[    0.856785]  dw_mipi_dsi_host_attach+0xbc/0xd0
[    0.857184]  mipi_dsi_attach+0x30/0x44
[    0.857521]  devm_mipi_dsi_attach+0x2c/0x70
[    0.857896]  ams495qa01_probe+0x2d4/0x33c
[    0.858257]  spi_probe+0x8c/0xb8
[    0.858550]  really_probe+0x1e0/0x3b8
[    0.858881]  __driver_probe_device+0x16c/0x184
[    0.859278]  driver_probe_device+0x4c/0xfc
[    0.859646]  __device_attach_driver+0xf0/0x170
[    0.860043]  bus_for_each_drv+0xa4/0xcc
[    0.860389]  __device_attach+0xfc/0x1a8
[    0.860733]  device_initial_probe+0x1c/0x28
[    0.861108]  bus_probe_device+0x38/0x9c
[    0.861452]  deferred_probe_work_func+0xdc/0xf0
[    0.861855]  process_one_work+0x1b0/0x260
[    0.862217]  process_scheduled_works+0x4c/0x50
[    0.862614]  worker_thread+0x1f0/0x26c
[    0.862949]  kthread+0xc4/0xd4
[    0.863227]  ret_from_fork+0x10/0x20
[    0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
[    0.864095] ---[ end trace 0000000000000000 ]---

A cursory reading of the datasheet suggests it's possible to have simultaneous output to 2 distinct outputs. On page 13 it states:

Support two simultaneous displays(same source) in the following interfaces:
- MIPI_DSI_TX
- LVDS
- HDMI
- eDP

In order to achieve this though, I need to output to VP0 and VP1 (or any 2 distinct VPs really). This is so I can have the ref clock set to 24MHz for the HDMI and the pixel clock of the DSI panel (for the example above it's 33.5MHz). Currently, only by removing this code block is such a thing possible, though I'm not sure if long-term there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568) along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).

Fixes 604be85547ce ("drm/rockchip: Add VOP2 driver")
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -0
index e4631f515ba4..f18d7f6f9f86 100644
@@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
 		struct vop2_win *win = &vop2->win[i];
 		u32 possible_crtcs;
 
Quoted 13 lines

drivers/gpu/drm/rockchip/rockchip_drm_vop2.c static int vop2_create_crtc(struct vop2 *vop2) · line 2304

Quoted 13 lines
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +0 -13
-		if (vop2->data->soc_id == 3566) {
-			/*
-			 * On RK3566 these windows don't have an independent
-			 * framebuffer. They share the framebuffer with smart0,
-			 * esmart0 and cluster0 respectively.
-			 */
-			switch (win->data->phys_id) {
-			case ROCKCHIP_VOP2_SMART1:
-			case ROCKCHIP_VOP2_ESMART1:
-			case ROCKCHIP_VOP2_CLUSTER1:
-				continue;
-			}
-		}

Let me say that a "window" in the Rockchip terminology is what a plane is in the DRM terminology, and a video port (vp) corresponds to a crtc.

On the RK3566 some windows do not have their own framebuffer, for example the smart1 window always shows what the smart0 window shows. This "feature" makes these windows unusable as planes, so the idea is to simply not use them.

Quoted 5 lines

If skipping these windows from initialization results in a NULL pointer deref then there's something wrong in the driver logic, but it's not the lines you are removing here that are wrong. Nothing should prevent you from using multiple VPs when the unusable windows on RK3566 are not registered.

I'll tell you what I "think" is causing the null pointer deref, but like always I reserve the right to be wrong.

Quoted 9 lines

The driver checks for the primary planes and assigns them to active video ports. For the rk3566 it's skipping the 3 planes mentioned above for the RK3566. As a result if there is more than 1 active video port for the rk3566 (or more than 2 for the rk3568 I'm assuming) it doesn't set vp->primary_plane = win for that port. Slightly below that it iterates through the active video ports again and runs drm_crtc_init_with_planes on them. Only in this case one of the ports doesn't have a plane, which is where it does the null pointer deref, because the plane is null.

Quoted 6 lines

Yes, you're right, that is likely the problem.

On RK3568 we have four windows that could serve as primary plane, so there's enough for each of the three VPs. On RK3566 we only have two windows, so once we use more than two active VPs we are running out of primary planes.

The datasheet states that it supports up to 2 simultaneous displays, so I think a hard limit of 2 VPs is fine for the rk3566.

Quoted 5 lines

I am writing these numbers because I think Esmart0-win0 could be used as primary plane, but is marked as DRM_PLANE_TYPE_OVERLAY in rk3568_vop_win_data[]. See the attached patch, if that's the problem it should resolve your issue.

Quoted 4 lines

This patch did indeed resolve my issue, and also allowed me to get both HDMI and DSI working simultaneously. It's not perfect (right now I'm displaying a 640x480 image on a 1080p display since my DSI panel runs at 640x480), but it works and that's great.

Quoted 4 lines

I just sent this patch for inclusion. Could you provide your formal
tested-by: tag?

Sascha

Done. Thank you once again for all your help.

Quoted 6 lines
Signature · 5 lines
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&amp;data=05%7C01%7C%7C0a2e9af8accf4b7e720708da9f979700%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637997770679554061%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=k56y1R3snN7uokq64C0Yx0K%2F0CbYktI%2BCeGyX5XHM%2Fk%3D&amp;reserved=0  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |