Skip to contentSkip to conversation

dma-buf: Check status of enable-signaling bit on debug

PATCH In review Arvind Yadav 6 participants 20 messages Sep 14, 2022 – Sep 29, 2022

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v4 cover dma-buf: Check status of enable-signaling bit on debug

Fence signaling must be enabled to make sure that the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DEBUG_WW_MUTEX_SLOWPATH is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

Arvind Yadav (6):
[PATCH v4 1/6] dma-buf: Remove the signaled bit status check [PATCH v4 2/6] dma-buf: set signaling bit for the stub fence [PATCH v4 3/6] dma-buf: Enable signaling on fence for selftests [PATCH v4 4/6] dma-buf: dma_fence_wait must enable signaling [PATCH v4 5/6] drm/sched: Use parent fence instead of finished [PATCH v4 6/6] dma-buf: Check status of enable-signaling bit on debug

 drivers/dma-buf/Kconfig                |  7 +++++++
 drivers/dma-buf/dma-fence.c            | 16 ++++++++++------
 drivers/dma-buf/st-dma-fence-chain.c   |  4 ++++
 drivers/dma-buf/st-dma-fence-unwrap.c  | 22 ++++++++++++++++++++++
 drivers/dma-buf/st-dma-fence.c         | 16 ++++++++++++++++
 drivers/dma-buf/st-dma-resv.c          | 10 ++++++++++
 drivers/gpu/drm/scheduler/sched_main.c |  4 ++--
 include/linux/dma-fence.h              |  5 +++++
 8 files changed, 76 insertions(+), 8 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v4 1/6 dma-buf: Remove the signaled bit status check

Remove the signaled bit status check because it is returning early when the fence is already signaled and __dma_fence_enable_signaling is checking the status of signaled bit again.

---

Changes in v1, v2: This new patch was not part of previous series.

---

 drivers/dma-buf/dma-fence.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/dma-buf/dma-fence.c +0 -3
index 066400ed8841..64c99739ad23 100644
@@ -601,9 +601,6 @@ void dma_fence_enable_sw_signaling(struct dma_fence *fence)
 {
 	unsigned long flags;
 
-	if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags))
-		return;
-
 	spin_lock_irqsave(fence->lock, flags);
 	__dma_fence_enable_signaling(fence);
 	spin_unlock_irqrestore(fence->lock, flags);
Signature · 1 line
2.25.1
#2 lore raw

PATCH v4 2/6 dma-buf: set signaling bit for the stub fence

In reply to Arvind Yadav

Here's setting software signaling bit for the stub fence which is always signaled. If this fence signaling bit is not set then the AMD GPU scheduler will cause a GPU reset due to a GPU scheduler cleanup activity timeout.

---

Changes in v1 :
1- Addressing Christian's comment to remove unnecessary callback. 2- Replacing CONFIG_DEBUG_WW_MUTEX_SLOWPATH instead of CONFIG_DEBUG_FS. 3- The version of this patch is also changed and previously it was [PATCH 3/4]

Changes in v2 :
1 - perviously using __dma_fence_enable_signaling() for enable signaling.
2 - #ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH removed

Changes in v3 :
1 - Enable Signaling bit for dma_fence_allocate_private_stub.

---
 drivers/dma-buf/dma-fence.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/dma-buf/dma-fence.c +8 -0
index 64c99739ad23..645c158b7e01 100644
@@ -136,6 +136,10 @@ struct dma_fence *dma_fence_get_stub(void)
 			       &dma_fence_stub_ops,
 			       &dma_fence_stub_lock,
 			       0, 0);
+
+		set_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT,
+			&dma_fence_stub.flags);
+
 		dma_fence_signal_locked(&dma_fence_stub);
 	}
 	spin_unlock(&dma_fence_stub_lock);
@@ -161,6 +165,10 @@ struct dma_fence *dma_fence_allocate_private_stub(void)
 		       &dma_fence_stub_ops,
 		       &dma_fence_stub_lock,
 		       0, 0);
+
+	set_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT,
+		&dma_fence_stub.flags);
+
 	dma_fence_signal(fence);
 
 	return fence;
Signature · 1 line
2.25.1
#3 lore raw

PATCH v4 3/6 dma-buf: Enable signaling on fence for selftests

In reply to Arvind Yadav

Here's enabling software signaling on fence for selftest.

---

Changes in v1 :
1- Addressing Christian's comment to remove unnecessary callback. 2- Replacing CONFIG_DEBUG_WW_MUTEX_SLOWPATH instead of CONFIG_DEBUG_FS. 3- The version of this patch is also changed and previously it was [PATCH 4/4]

Changes in v2 :
1- #ifdef CONFIG_DEBUG_WW_MUTEX_SLOWPATH removed

---

 drivers/dma-buf/st-dma-fence-chain.c  |  4 ++++
 drivers/dma-buf/st-dma-fence-unwrap.c | 22 ++++++++++++++++++++++
 drivers/dma-buf/st-dma-fence.c        | 16 ++++++++++++++++
 drivers/dma-buf/st-dma-resv.c         | 10 ++++++++++
 4 files changed, 52 insertions(+)
drivers/dma-buf/st-dma-fence-chain.c +4 -0
index 8ce1ea59d31b..0a9b099d0518 100644
@@ -87,6 +87,8 @@ static int sanitycheck(void *arg)
 	if (!chain)
 		err = -ENOMEM;
 
+	dma_fence_enable_sw_signaling(chain);
+
 	dma_fence_signal(f);
 	dma_fence_put(f);
 
@@ -143,6 +145,8 @@ static int fence_chains_init(struct fence_chains *fc, unsigned int count,
 		}
 
 		fc->tail = fc->chains[i];
+
+		dma_fence_enable_sw_signaling(fc->chains[i]);
 	}
 
 	fc->chain_length = i;
drivers/dma-buf/st-dma-fence-unwrap.c +22 -0
index 4105d5ea8dde..f0cee984b6c7 100644
@@ -102,6 +102,8 @@ static int sanitycheck(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	array = mock_array(1, f);
 	if (!array)
 		return -ENOMEM;
@@ -124,12 +126,16 @@ static int unwrap_array(void *arg)
 	if (!f1)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f1);
+
 	f2 = mock_fence();
 	if (!f2) {
 		dma_fence_put(f1);
 		return -ENOMEM;
 	}
 
+	dma_fence_enable_sw_signaling(f2);
+
 	array = mock_array(2, f1, f2);
 	if (!array)
 		return -ENOMEM;
@@ -164,12 +170,16 @@ static int unwrap_chain(void *arg)
 	if (!f1)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f1);
+
 	f2 = mock_fence();
 	if (!f2) {
 		dma_fence_put(f1);
 		return -ENOMEM;
 	}
 
+	dma_fence_enable_sw_signaling(f2);
+
 	chain = mock_chain(f1, f2);
 	if (!chain)
 		return -ENOMEM;
@@ -204,12 +214,16 @@ static int unwrap_chain_array(void *arg)
 	if (!f1)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f1);
+
 	f2 = mock_fence();
 	if (!f2) {
 		dma_fence_put(f1);
 		return -ENOMEM;
 	}
 
+	dma_fence_enable_sw_signaling(f2);
+
 	array = mock_array(2, f1, f2);
 	if (!array)
 		return -ENOMEM;
@@ -248,12 +262,16 @@ static int unwrap_merge(void *arg)
 	if (!f1)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f1);
+
 	f2 = mock_fence();
 	if (!f2) {
 		err = -ENOMEM;
 		goto error_put_f1;
 	}
 
+	dma_fence_enable_sw_signaling(f2);
+
 	f3 = dma_fence_unwrap_merge(f1, f2);
 	if (!f3) {
 		err = -ENOMEM;
@@ -296,10 +314,14 @@ static int unwrap_merge_complex(void *arg)
 	if (!f1)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f1);
+
 	f2 = mock_fence();
 	if (!f2)
 		goto error_put_f1;
 
+	dma_fence_enable_sw_signaling(f2);
+
 	f3 = dma_fence_unwrap_merge(f1, f2);
 	if (!f3)
 		goto error_put_f2;
drivers/dma-buf/st-dma-fence.c +16 -0
index c8a12d7ad71a..fb6e0a6ae2c9 100644
@@ -102,6 +102,8 @@ static int sanitycheck(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_fence_signal(f);
 	dma_fence_put(f);
 
@@ -117,6 +119,8 @@ static int test_signaling(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	if (dma_fence_is_signaled(f)) {
 		pr_err("Fence unexpectedly signaled on creation\n");
 		goto err_free;
@@ -190,6 +194,8 @@ static int test_late_add_callback(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_fence_signal(f);
 
 	if (!dma_fence_add_callback(f, &cb.cb, simple_callback)) {
@@ -282,6 +288,8 @@ static int test_status(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	if (dma_fence_get_status(f)) {
 		pr_err("Fence unexpectedly has signaled status on creation\n");
 		goto err_free;
@@ -308,6 +316,8 @@ static int test_error(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_fence_set_error(f, -EIO);
 
 	if (dma_fence_get_status(f)) {
@@ -337,6 +347,8 @@ static int test_wait(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	if (dma_fence_wait_timeout(f, false, 0) != -ETIME) {
 		pr_err("Wait reported complete before being signaled\n");
 		goto err_free;
@@ -379,6 +391,8 @@ static int test_wait_timeout(void *arg)
 	if (!wt.f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(wt.f);
+
 	if (dma_fence_wait_timeout(wt.f, false, 1) != -ETIME) {
 		pr_err("Wait reported complete before being signaled\n");
 		goto err_free;
@@ -458,6 +472,8 @@ static int thread_signal_callback(void *arg)
 			break;
 		}
 
+		dma_fence_enable_sw_signaling(f1);
+
 		rcu_assign_pointer(t->fences[t->id], f1);
 		smp_wmb();
 
drivers/dma-buf/st-dma-resv.c +10 -0
index 813779e3c9be..15dbea1462ed 100644
@@ -45,6 +45,8 @@ static int sanitycheck(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_fence_signal(f);
 	dma_fence_put(f);
 
@@ -69,6 +71,8 @@ static int test_signaling(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_resv_init(&resv);
 	r = dma_resv_lock(&resv, NULL);
 	if (r) {
@@ -114,6 +118,8 @@ static int test_for_each(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_resv_init(&resv);
 	r = dma_resv_lock(&resv, NULL);
 	if (r) {
@@ -173,6 +179,8 @@ static int test_for_each_unlocked(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_resv_init(&resv);
 	r = dma_resv_lock(&resv, NULL);
 	if (r) {
@@ -244,6 +252,8 @@ static int test_get_fences(void *arg)
 	if (!f)
 		return -ENOMEM;
 
+	dma_fence_enable_sw_signaling(f);
+
 	dma_resv_init(&resv);
 	r = dma_resv_lock(&resv, NULL);
 	if (r) {
Signature · 1 line
2.25.1
#4 lore raw

PATCH v4 4/6 dma-buf: dma_fence_wait must enable signaling

In reply to Arvind Yadav

dma_fence_wait() should always enable signaling even when the fence is already signaled.

---

Changes in v1..v3: This new patch was not part of previous series.

---

 drivers/dma-buf/dma-fence.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/dma-buf/dma-fence.c +2 -3
index 645c158b7e01..a5fbf1c1e0ea 100644
@@ -508,6 +508,8 @@ dma_fence_wait_timeout(struct dma_fence *fence, bool intr, signed long timeout)
 
 	__dma_fence_might_wait();
 
+	dma_fence_enable_sw_signaling(fence);
+
 	trace_dma_fence_wait_start(fence);
 	if (fence->ops->wait)
 		ret = fence->ops->wait(fence, intr, timeout);
@@ -771,9 +773,6 @@ dma_fence_default_wait(struct dma_fence *fence, bool intr, signed long timeout)
 		goto out;
 	}
 
-	if (!__dma_fence_enable_signaling(fence))
-		goto out;
-
 	if (!timeout) {
 		ret = 0;
 		goto out;
Signature · 1 line
2.25.1
maintainer Reviewed-by on v4 4/6
#5 lore raw

Re: [PATCH v4 4/6] dma-buf: dma_fence_wait must enable signaling

Am 14.09.22 um 18:43 schrieb Arvind Yadav:

Quoted 4 lines

dma_fence_wait() should always enable signaling even when the fence is already signaled.

Quoted 32 lines

---

Changes in v1..v3: This new patch was not part of previous series.

---

  drivers/dma-buf/dma-fence.c | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)
drivers/dma-buf/dma-fence.c +2 -3
index 645c158b7e01..a5fbf1c1e0ea 100644
@@ -508,6 +508,8 @@ dma_fence_wait_timeout(struct dma_fence *fence, bool intr, signed long timeout)
 
  	__dma_fence_might_wait();
 
+	dma_fence_enable_sw_signaling(fence);
+
  	trace_dma_fence_wait_start(fence);
  	if (fence->ops->wait)
  		ret = fence->ops->wait(fence, intr, timeout);
@@ -771,9 +773,6 @@ dma_fence_default_wait(struct dma_fence *fence, bool intr, signed long timeout)
  		goto out;
  	}
 
-	if (!__dma_fence_enable_signaling(fence))
-		goto out;
-
  	if (!timeout) {
  		ret = 0;
  		goto out;
#6 lore raw

PATCH v4 5/6 drm/sched: Use parent fence instead of finished

In reply to Arvind Yadav

Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset.

---

changes in v1,v2 - Enable signaling for finished fence in sche_main() is removed

---
 drivers/gpu/drm/scheduler/sched_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +2 -2
index e0ab14e0fb6b..2ac28ad11432 100644
@@ -829,7 +829,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 	job = list_first_entry_or_null(&sched->pending_list,
 				       struct drm_sched_job, list);
 
-	if (job && dma_fence_is_signaled(&job->s_fence->finished)) {
+	if (job && dma_fence_is_signaled(job->s_fence->parent)) {
 		/* remove job from pending_list */
 		list_del_init(&job->list);
 
@@ -841,7 +841,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 
 		if (next) {
 			next->s_fence->scheduled.timestamp =
-				job->s_fence->finished.timestamp;
+				job->s_fence->parent->timestamp;
 			/* start TO timer for next job */
 			drm_sched_start_timeout(sched);
 		}
Signature · 1 line
2.25.1
#7 lore raw

Re: [PATCH v4 5/6] drm/sched: Use parent fence instead of finished

Quoted 3 lines · Arvind Yadav

Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset.

I'm able to reproduce crashes on Panfrost and I believe this commit is the cause. Specifically it's possible for job->s_fence->parent to be NULL.

The underlying issue seems to involve drm_sched_resubmit_jobs_ext() - if the run_jobs() callback returns an error it will set s_fence->parent to NULL after signalling s_fence->finished:

Quoted 8 lines
		fence = sched->ops->run_job(s_job);
		i++;

		if (IS_ERR_OR_NULL(fence)) {
			if (IS_ERR(fence))
				dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));

			s_job->s_fence->parent = NULL;

I don't understand the reasoning behind this change, but it doesn't seem right to be using the parent fence when we have code which can be setting that pointer to NULL.

Since I don't understand the reasoning my only suggestion is to revert this patch (and potentially the dependent patch "dma-buf: Check status of enable-signaling bit on debug"?).

Can anyone suggest a better fix?

Thanks,

Steve

Quoted 33 lines

---

changes in v1,v2 - Enable signaling for finished fence in sche_main() is removed

---
 drivers/gpu/drm/scheduler/sched_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +2 -2
index e0ab14e0fb6b..2ac28ad11432 100644
@@ -829,7 +829,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 	job = list_first_entry_or_null(&sched->pending_list,
 				       struct drm_sched_job, list);
 
-	if (job && dma_fence_is_signaled(&job->s_fence->finished)) {
+	if (job && dma_fence_is_signaled(job->s_fence->parent)) {
 		/* remove job from pending_list */
 		list_del_init(&job->list);
 
@@ -841,7 +841,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 
 		if (next) {
 			next->s_fence->scheduled.timestamp =
-				job->s_fence->finished.timestamp;
+				job->s_fence->parent->timestamp;
 			/* start TO timer for next job */
 			drm_sched_start_timeout(sched);
 		}
maintainer
#8 lore raw

Re: [PATCH v4 5/6] drm/sched: Use parent fence instead of finished

Am 29.09.22 um 16:53 schrieb Steven Price:

Quoted 23 lines · Arvind Yadav
Quoted 3 lines

Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset.

I'm able to reproduce crashes on Panfrost and I believe this commit is the cause. Specifically it's possible for job->s_fence->parent to be NULL.

The underlying issue seems to involve drm_sched_resubmit_jobs_ext() - if the run_jobs() callback returns an error it will set s_fence->parent to NULL after signalling s_fence->finished:

Quoted 8 lines
		fence = sched->ops->run_job(s_job);
		i++;

		if (IS_ERR_OR_NULL(fence)) {
			if (IS_ERR(fence))
				dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));

			s_job->s_fence->parent = NULL;

I don't understand the reasoning behind this change, but it doesn't seem right to be using the parent fence when we have code which can be setting that pointer to NULL.

Quoted 5 lines

Since I don't understand the reasoning my only suggestion is to revert this patch (and potentially the dependent patch "dma-buf: Check status of enable-signaling bit on debug"?).

Can anyone suggest a better fix?

Well, first of all please absolutely don't use drm_sched_resubmit_jobs_ext()!

It was an extremely bad idea in amdgpu to approach GPU by re-submitting jobs and it was an even worse idea to push this into the scheduler.

The design of dma_fence is that you submit that once and *only* once and then get a result for this submission. If re-submission is desirable it should be done in userspace or at least higher levels.

Apart from that, yes a NULL check is missing here but that should be trivial to fix.

Thanks,
Christian.

Quoted 38 lines

Thanks,

Steve

Quoted 33 lines

---

changes in v1,v2 - Enable signaling for finished fence in sche_main() is removed

---
  drivers/gpu/drm/scheduler/sched_main.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +2 -2
index e0ab14e0fb6b..2ac28ad11432 100644
@@ -829,7 +829,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
  	job = list_first_entry_or_null(&sched->pending_list,
  				       struct drm_sched_job, list);
 
-	if (job && dma_fence_is_signaled(&job->s_fence->finished)) {
+	if (job && dma_fence_is_signaled(job->s_fence->parent)) {
  		/* remove job from pending_list */
  		list_del_init(&job->list);
 
@@ -841,7 +841,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 
  		if (next) {
  			next->s_fence->scheduled.timestamp =
-				job->s_fence->finished.timestamp;
+				job->s_fence->parent->timestamp;
  			/* start TO timer for next job */
  			drm_sched_start_timeout(sched);
  		}
#9 lore raw

Re: [PATCH v4 5/6] drm/sched: Use parent fence instead of finished

Quoted 25 lines · Christian König

Am 29.09.22 um 16:53 schrieb Steven Price:

Quoted 24 lines · Arvind Yadav
Quoted 3 lines

Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset.

I'm able to reproduce crashes on Panfrost and I believe this commit is the cause. Specifically it's possible for job->s_fence->parent to be NULL.

The underlying issue seems to involve drm_sched_resubmit_jobs_ext() - if the run_jobs() callback returns an error it will set s_fence->parent to NULL after signalling s_fence->finished:

Quoted 8 lines

        fence = sched->ops->run_job(s_job); i++;

        if (IS_ERR_OR_NULL(fence)) {
            if (IS_ERR(fence)) dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));

            s_job->s_fence->parent = NULL;

I don't understand the reasoning behind this change, but it doesn't seem right to be using the parent fence when we have code which can be setting that pointer to NULL.

Quoted 8 lines
Quoted 5 lines

Since I don't understand the reasoning my only suggestion is to revert this patch (and potentially the dependent patch "dma-buf: Check status of enable-signaling bit on debug"?).

Can anyone suggest a better fix?

Well, first of all please absolutely don't use
drm_sched_resubmit_jobs_ext()!

Panfrost isn't using drm_sched_resubmit_jobs_ext() directly but via drm_sched_resubmit_jobs().

Quoted 6 lines

It was an extremely bad idea in amdgpu to approach GPU by re-submitting jobs and it was an even worse idea to push this into the scheduler.

The design of dma_fence is that you submit that once and *only* once and then get a result for this submission. If re-submission is desirable it should be done in userspace or at least higher levels.

Panfrost has an interesting feature where it's possible to rescue a job during a GPU reset. Because jobs are queued on the GPU if the job hasn't actually started executing then it's quite possible to safely resubmit it from the kernel driver and user space doesn't need to be involved.

The benefit of this is if another process has hung the GPU that processes jobs can be killed off without affecting any other innocent processes.

One option would be to hide all this from the scheduler, but I can't see how to do that without also hiding the actual reset from the scheduler. Admittedly at the moment Panfrost is far too aggressive at resetting and will perform a GPU reset in conditions where it's completely unnecessary. There's work to do there but I haven't had the time to look at it yet.

Quoted 2 lines

Apart from that, yes a NULL check is missing here but that should be trivial to fix.

What I'm struggling to get my head round is whether it's correct to always treat the job as signalled just because s_fence->parent is NULL?

Thanks,

Steve

Quoted 42 lines

Thanks,
Christian.

Quoted 38 lines

Thanks,

Steve

Quoted 33 lines

---

changes in v1,v2 - Enable signaling for finished fence in sche_main() is removed

---
  drivers/gpu/drm/scheduler/sched_main.c | 4 ++--

  1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +1 -0
index e0ab14e0fb6b..2ac28ad11432 100644
@@ -829,7 +829,7 @@ drm_sched_get_cleanup_job(struct
 drm_gpu_scheduler *sched)
       job = list_first_entry_or_null(&sched->pending_list,
                          struct drm_sched_job, list);
   -    if (job && dma_fence_is_signaled(&job->s_fence->finished)) {
+    if (job && dma_fence_is_signaled(job->s_fence->parent)) {
           /* remove job from pending_list */
           list_del_init(&job->list);

  @@ -841,7 +841,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
            if (next) { next->s_fence->scheduled.timestamp = -                job->s_fence->finished.timestamp; +                job->s_fence->parent->timestamp; /* start TO timer for next job */ drm_sched_start_timeout(sched); }

#10 lore raw

Re: [Linaro-mm-sig] Re: [PATCH v4 5/6] drm/sched: Use parent fence instead of finished

Am 29.09.22 um 17:31 schrieb Steven Price:

Quoted 30 lines · Christian König
Quoted 29 lines

Am 29.09.22 um 16:53 schrieb Steven Price:

Quoted 28 lines · Arvind Yadav
Quoted 3 lines

Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset.

I'm able to reproduce crashes on Panfrost and I believe this commit is the cause. Specifically it's possible for job->s_fence->parent to be NULL.

The underlying issue seems to involve drm_sched_resubmit_jobs_ext() - if the run_jobs() callback returns an error it will set s_fence->parent to NULL after signalling s_fence->finished:

Quoted 8 lines

        fence = sched->ops->run_job(s_job); i++;

        if (IS_ERR_OR_NULL(fence)) {
            if (IS_ERR(fence)) dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));

            s_job->s_fence->parent = NULL;

I don't understand the reasoning behind this change, but it doesn't seem right to be using the parent fence when we have code which can be setting that pointer to NULL.

Since I don't understand the reasoning my only suggestion is to revert this patch (and potentially the dependent patch "dma-buf: Check status of enable-signaling bit on debug"?).

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Can anyone suggest a better fix?

Well, first of all please absolutely don't use
drm_sched_resubmit_jobs_ext()!

Panfrost isn't using drm_sched_resubmit_jobs_ext() directly but via drm_sched_resubmit_jobs().

Yeah, but it's the same problem that this isn't designed very well.

Quoted 10 lines
Quoted 6 lines

It was an extremely bad idea in amdgpu to approach GPU by re-submitting jobs and it was an even worse idea to push this into the scheduler.

The design of dma_fence is that you submit that once and *only* once and then get a result for this submission. If re-submission is desirable it should be done in userspace or at least higher levels.

Panfrost has an interesting feature where it's possible to rescue a job during a GPU reset. Because jobs are queued on the GPU if the job hasn't actually started executing then it's quite possible to safely resubmit it from the kernel driver and user space doesn't need to be involved.

That's actually fine. E.g. when you can save the hardware state and restart it there is nothing as far as I can see which speaks against that.

The problem is rather pushing this into the scheduler because and trying to fit the square pig through a round hole.

You either end up allocating memory while inside a GPU reset (which is illegal because allocating memory could need to wait for the reset to finish). Or you end up re-using the same dma_fence object twice (which in turn is illegal from the dma_fence design).

Quoted 11 lines

The benefit of this is if another process has hung the GPU that processes jobs can be killed off without affecting any other innocent processes.

One option would be to hide all this from the scheduler, but I can't see how to do that without also hiding the actual reset from the scheduler. Admittedly at the moment Panfrost is far too aggressive at resetting and will perform a GPU reset in conditions where it's completely unnecessary. There's work to do there but I haven't had the time to look at it yet.

Quoted 4 lines
Quoted 2 lines

Apart from that, yes a NULL check is missing here but that should be trivial to fix.

What I'm struggling to get my head round is whether it's correct to always treat the job as signalled just because s_fence->parent is NULL?

Well s_fence parent will never be set to something else than NULL in this situation, isn't it?

The problem with using the finished fence is that this is actually the public interface of the scheduler instead of the internal state.

In other words s_fence->parent is what the scheduler deals with to produce the s_fence->finished state.

Christian.

Quoted 48 lines

Thanks,

Steve

Quoted 32 lines

Thanks,
Christian.

Quoted 29 lines

Thanks,

Steve

Quoted 25 lines

---

changes in v1,v2 - Enable signaling for finished fence in sche_main() is removed

---
   drivers/gpu/drm/scheduler/sched_main.c | 4 ++--
   1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/scheduler/sched_main.c +1 -0
index e0ab14e0fb6b..2ac28ad11432 100644
@@ -829,7 +829,7 @@ drm_sched_get_cleanup_job(struct
 drm_gpu_scheduler *sched)
       job = list_first_entry_or_null(&sched->pending_list,
                          struct drm_sched_job, list);
   -    if (job && dma_fence_is_signaled(&job->s_fence->finished)) {
+    if (job && dma_fence_is_signaled(job->s_fence->parent)) {
           /* remove job from pending_list */
           list_del_init(&job->list);
   @@ -841,7 +841,7 @@ drm_sched_get_cleanup_job(struct
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

drm_gpu_scheduler *sched)
            if (next) { next->s_fence->scheduled.timestamp =
-                job->s_fence->finished.timestamp; +                job->s_fence->parent->timestamp;
              /* start TO timer for next job */ drm_sched_start_timeout(sched); }

_______________________________________________
Linaro-mm-sig mailing list -- [email protected] To unsubscribe send an email to [email protected]

#11 lore raw

PATCH v4 6/6 dma-buf: Check status of enable-signaling bit on debug

In reply to Arvind Yadav

Fence signaling must be enabled to make sure that
the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DMABUF_DEBUG_ENABLE_SIGNALING is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

---

Changes in v1,v2 :
1- Addressing Christian's comment to replace CONFIG_DEBUG_WW_MUTEX_SLOWPATH instead of CONFIG_DEBUG_FS. 2- As per Christian's comment moving this patch at last so The version of this patch is also changed and previously it was [PATCH 1/4]

Changes in v3:
1 - Adding new config DMABUF_DEBUG_ENABLE_SIGNALING. 2 - Replace CONFIG_DEBUG_WW_MUTEX_SLOWPATH to new CONFIG_DMABUF_DEBUG_ENABLE_SIGNALING.

---
 drivers/dma-buf/Kconfig   | 7 +++++++
 include/linux/dma-fence.h | 5 +++++
 2 files changed, 12 insertions(+)
drivers/dma-buf/Kconfig +7 -0
index e4dc53a36428..c991e6a51510 100644
@@ -65,6 +65,13 @@ config DMABUF_SELFTESTS
 	default n
 	depends on DMA_SHARED_BUFFER
 
+config DMABUF_DEBUG_ENABLE_SIGNALING
+	bool "DMA Fence enable signaling debug checks"
+	default n
+	depends on DMA_SHARED_BUFFER
+	help
+	  This option enables additional checks for software signaling of fence.
+
 menuconfig DMABUF_HEAPS
 	bool "DMA-BUF Userland Memory Heaps"
 	select DMA_SHARED_BUFFER
include/linux/dma-fence.h +5 -0
index 775cdc0b4f24..01e1fa4d3cec 100644
@@ -428,6 +428,11 @@ dma_fence_is_signaled_locked(struct dma_fence *fence)
 static inline bool
 dma_fence_is_signaled(struct dma_fence *fence)
 {
+#ifdef CONFIG_DMABUF_DEBUG_ENABLE_SIGNALING
+	if (!test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, &fence->flags))
+		return false;
+#endif
+
 	if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags))
 		return true;
 
Signature · 1 line
2.25.1
maintainer Reviewed-by on v4 6/6
#12 lore raw

Am 14.09.22 um 18:43 schrieb Arvind Yadav:

Quoted 9 lines

Fence signaling must be enabled to make sure that
the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DMABUF_DEBUG_ENABLE_SIGNALING is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

Quoted 53 lines

---

Changes in v1,v2 :
1- Addressing Christian's comment to replace CONFIG_DEBUG_WW_MUTEX_SLOWPATH instead of CONFIG_DEBUG_FS. 2- As per Christian's comment moving this patch at last so The version of this patch is also changed and previously it was [PATCH 1/4]

Changes in v3:
1 - Adding new config DMABUF_DEBUG_ENABLE_SIGNALING. 2 - Replace CONFIG_DEBUG_WW_MUTEX_SLOWPATH to new CONFIG_DMABUF_DEBUG_ENABLE_SIGNALING.

---
  drivers/dma-buf/Kconfig   | 7 +++++++
  include/linux/dma-fence.h | 5 +++++
  2 files changed, 12 insertions(+)
drivers/dma-buf/Kconfig +7 -0
index e4dc53a36428..c991e6a51510 100644
@@ -65,6 +65,13 @@ config DMABUF_SELFTESTS
  	default n
  	depends on DMA_SHARED_BUFFER
 
+config DMABUF_DEBUG_ENABLE_SIGNALING
+	bool "DMA Fence enable signaling debug checks"
+	default n
+	depends on DMA_SHARED_BUFFER
+	help
+	  This option enables additional checks for software signaling of fence.
+
  menuconfig DMABUF_HEAPS
  	bool "DMA-BUF Userland Memory Heaps"
  	select DMA_SHARED_BUFFER
include/linux/dma-fence.h +5 -0
index 775cdc0b4f24..01e1fa4d3cec 100644
@@ -428,6 +428,11 @@ dma_fence_is_signaled_locked(struct dma_fence *fence)
  static inline bool
  dma_fence_is_signaled(struct dma_fence *fence)
  {
+#ifdef CONFIG_DMABUF_DEBUG_ENABLE_SIGNALING
+	if (!test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, &fence->flags))
+		return false;
+#endif
+
  	if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags))
  		return true;
 
maintainer
#13 lore raw
In reply to Arvind Yadav

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

What's left is checking the userspace IGT tests. Especially the sync_file and drm_syncobj tests I would expect to have problems with this extra check.

Thanks,
Christian.

Am 14.09.22 um 18:43 schrieb Arvind Yadav:

Quoted 26 lines

Fence signaling must be enabled to make sure that the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DEBUG_WW_MUTEX_SLOWPATH is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

Arvind Yadav (6):
[PATCH v4 1/6] dma-buf: Remove the signaled bit status check [PATCH v4 2/6] dma-buf: set signaling bit for the stub fence [PATCH v4 3/6] dma-buf: Enable signaling on fence for selftests [PATCH v4 4/6] dma-buf: dma_fence_wait must enable signaling [PATCH v4 5/6] drm/sched: Use parent fence instead of finished [PATCH v4 6/6] dma-buf: Check status of enable-signaling bit on debug

  drivers/dma-buf/Kconfig                |  7 +++++++
  drivers/dma-buf/dma-fence.c            | 16 ++++++++++------
  drivers/dma-buf/st-dma-fence-chain.c   |  4 ++++
  drivers/dma-buf/st-dma-fence-unwrap.c  | 22 ++++++++++++++++++++++
  drivers/dma-buf/st-dma-fence.c         | 16 ++++++++++++++++
  drivers/dma-buf/st-dma-resv.c          | 10 ++++++++++
  drivers/gpu/drm/scheduler/sched_main.c |  4 ++--
  include/linux/dma-fence.h              |  5 +++++
  8 files changed, 76 insertions(+), 8 deletions(-)
#14 lore raw
Quoted 2 lines · Christian König

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

Quoted 2 lines

What's left is checking the userspace IGT tests. Especially the sync_file and drm_syncobj tests I would expect to have problems with this extra check.

Yes, IGT test cases are failing .

~Arvind

Quoted 31 lines

Thanks,
Christian.

Am 14.09.22 um 18:43 schrieb Arvind Yadav:

Quoted 26 lines

Fence signaling must be enabled to make sure that the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DEBUG_WW_MUTEX_SLOWPATH is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

Arvind Yadav (6):
   [PATCH v4 1/6] dma-buf: Remove the signaled bit status check [PATCH v4 2/6] dma-buf: set signaling bit for the stub fence [PATCH v4 3/6] dma-buf: Enable signaling on fence for selftests [PATCH v4 4/6] dma-buf: dma_fence_wait must enable signaling [PATCH v4 5/6] drm/sched: Use parent fence instead of finished [PATCH v4 6/6] dma-buf: Check status of enable-signaling bit on debug

  drivers/dma-buf/Kconfig                |  7 +++++++ drivers/dma-buf/dma-fence.c            | 16 ++++++++++------ drivers/dma-buf/st-dma-fence-chain.c   |  4 ++++ drivers/dma-buf/st-dma-fence-unwrap.c  | 22 ++++++++++++++++++++++ drivers/dma-buf/st-dma-fence.c         | 16 ++++++++++++++++ drivers/dma-buf/st-dma-resv.c          | 10 ++++++++++ drivers/gpu/drm/scheduler/sched_main.c |  4 ++-- include/linux/dma-fence.h              |  5 +++++

  8 files changed, 76 insertions(+), 8 deletions(-)
maintainer
#15 lore raw

Am 15.09.22 um 15:02 schrieb Yadav, Arvind:

Quoted 5 lines · Christian König
Quoted 2 lines

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

In this case I will start pushing the patches to drm-misc-next. I'm just going to leave out the last one until the IGT tests are working as well.

Quoted 3 lines
Quoted 2 lines

What's left is checking the userspace IGT tests. Especially the sync_file and drm_syncobj tests I would expect to have problems with this extra check.

Yes, IGT test cases are failing

Yeah, as noted on the call please investigate.

This one is the real reason why I wanted somebody to look at this. My suspicion is that we have missing calls to dma_fence_enable_sw_signaling() in the drm_syncobj code.

Thanks,
Christian.

Quoted 34 lines

~Arvind

Quoted 31 lines

Thanks,
Christian.

Am 14.09.22 um 18:43 schrieb Arvind Yadav:

Quoted 26 lines

Fence signaling must be enabled to make sure that the dma_fence_is_signaled() function ever returns true. Since drivers and implementations sometimes mess this up, this ensures correct behaviour when DEBUG_WW_MUTEX_SLOWPATH is used during debugging.
This should make any implementation bugs resulting in not signaled fences much more obvious.

Arvind Yadav (6):
   [PATCH v4 1/6] dma-buf: Remove the signaled bit status check [PATCH v4 2/6] dma-buf: set signaling bit for the stub fence [PATCH v4 3/6] dma-buf: Enable signaling on fence for selftests [PATCH v4 4/6] dma-buf: dma_fence_wait must enable signaling [PATCH v4 5/6] drm/sched: Use parent fence instead of finished [PATCH v4 6/6] dma-buf: Check status of enable-signaling bit on debug

  drivers/dma-buf/Kconfig                |  7 +++++++ drivers/dma-buf/dma-fence.c            | 16 ++++++++++------ drivers/dma-buf/st-dma-fence-chain.c   |  4 ++++ drivers/dma-buf/st-dma-fence-unwrap.c  | 22 ++++++++++++++++++++++ drivers/dma-buf/st-dma-fence.c         | 16 ++++++++++++++++ drivers/dma-buf/st-dma-resv.c          | 10 ++++++++++ drivers/gpu/drm/scheduler/sched_main.c |  4 ++-- include/linux/dma-fence.h              |  5 +++++

  8 files changed, 76 insertions(+), 8 deletions(-)
#16 lore raw
Quoted 10 lines · Christian König

Am 15.09.22 um 15:02 schrieb Yadav, Arvind:

Quoted 6 lines · Christian König
Quoted 3 lines

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

In this case I will start pushing the patches to drm-misc-next. I'm just going to leave out the last one until the IGT tests are working as well.

ffs Christian. intel CI blew up yet again:
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12146/shard-glk7/igt@kms_plane_lowres@[email protected]

The last time (some ttm thing) was just a week or two ago, so it's really getting tiresome watching you push entirely untested stuff all the time. Would be really helpful if you finally started to do/require premerge testing.

Signature · 2 lines
Ville Syrjälä
Intel
#17 lore raw

Am 17.09.22 um 08:17 schrieb Ville Syrjälä:

Quoted 9 lines · Christian König
Quoted 8 lines

Am 15.09.22 um 15:02 schrieb Yadav, Arvind:

Quoted 5 lines · Christian König
Quoted 3 lines

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

In this case I will start pushing the patches to drm-misc-next. I'm just going to leave out the last one until the IGT tests are working as well.

Quoted 7 lines

ffs Christian. intel CI blew up yet again:
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12146/shard-glk7/igt@kms_plane_lowres@[email protected]

The last time (some ttm thing) was just a week or two ago, so it's really getting tiresome watching you push entirely untested stuff all the time. Would be really helpful if you finally started to do/require premerge testing.

Well first of all sorry for causing trouble, but as I wrote above I intentionally left out the last one to *not* break the IGT tests.

The patches pushed so far where just updating a bunch of corner cases and fixing the selftests.

Do you have any more insight why that should affect the IGT tests?

Regards,
Christian.

#18 lore raw
Quoted 18 lines · Christian König

Am 17.09.22 um 08:17 schrieb Ville Syrjälä:

Quoted 9 lines · Christian König
Quoted 8 lines

Am 15.09.22 um 15:02 schrieb Yadav, Arvind:

Quoted 5 lines · Christian König
Quoted 3 lines

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

In this case I will start pushing the patches to drm-misc-next. I'm just going to leave out the last one until the IGT tests are working as well.

Quoted 7 lines

ffs Christian. intel CI blew up yet again:
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12146/shard-glk7/igt@kms_plane_lowres@[email protected]

The last time (some ttm thing) was just a week or two ago, so it's really getting tiresome watching you push entirely untested stuff all the time. Would be really helpful if you finally started to do/require premerge testing.

Quoted 7 lines

Well first of all sorry for causing trouble, but as I wrote above I intentionally left out the last one to *not* break the IGT tests.

The patches pushed so far where just updating a bunch of corner cases and fixing the selftests.

Do you have any more insight why that should affect the IGT tests?

I have no idea. You have the oopses from pstore right there. Did you even look at them?

Signature · 2 lines
Ville Syrjälä
Intel
maintainer
#19 lore raw

Am 19.09.22 um 13:26 schrieb Ville Syrjälä:

Quoted 21 lines · Christian König
Quoted 20 lines

Am 17.09.22 um 08:17 schrieb Ville Syrjälä:

Quoted 9 lines · Christian König
Quoted 8 lines

Am 15.09.22 um 15:02 schrieb Yadav, Arvind:

Quoted 5 lines · Christian König
Quoted 3 lines

Is that sufficient to allow running a desktop on amdgpu with the extra check enabled? If yes that would be quite a milestone.

Yes, It is running on amdgpu with extra config enabled.

In this case I will start pushing the patches to drm-misc-next. I'm just going to leave out the last one until the IGT tests are working as well.

Quoted 7 lines

ffs Christian. intel CI blew up yet again:
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fintel-gfx-ci.01.org%2Ftree%2Fdrm-tip%2FCI_DRM_12146%2Fshard-glk7%2Figt%40kms_plane_lowres%40tiling-y%40pipe-c-hdmi-a-2.html&data=05%7C01%7Cchristian.koenig%40amd.com%7C31a4fd82204b4eada97708da9a31d922%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637991836142423547%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=TqPiX483fF%2FUdZHTjle8k5XplcF3DVaZBs0IzQlNYck%3D&reserved=0

The last time (some ttm thing) was just a week or two ago, so it's really getting tiresome watching you push entirely untested stuff all the time. Would be really helpful if you finally started to do/require premerge testing.

Well first of all sorry for causing trouble, but as I wrote above I intentionally left out the last one to *not* break the IGT tests.

Quoted 6 lines
Quoted 4 lines

The patches pushed so far where just updating a bunch of corner cases and fixing the selftests.

Do you have any more insight why that should affect the IGT tests?

I have no idea. You have the oopses from pstore right there. Did you even look at them?

Ah! Sorry, I didn't see that there were additional links to the oopses. Yeah, the problem is obvious with them.

The check for the signaled bit comes before grabbing the lock. This only worked before because of the __dma_fence_enable_sw_signaling() shortcut.

Going to send a fix for this in a minute.

Thanks,
Christian.