Add riscv semihosting support in u-boot
cover Add riscv semihosting support in u-boot
Semihosting is a mechanism that enables code running on a target to communicate and use the Input/Output facilities on a host computer that is running a debugger. This patchset adds support for semihosting in u-boot for RISCV64 targets.
Compilation and test commands for SPL and S-mode configurations
=================================================================
U-Boot S-mode on QEMU virt
----------------------------
// Compilation of S-mode u-boot
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_smode_defconfig
make
// Run riscv 64-bit u-boot with opensbi on qemu qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
opensbi/build/platform/generic/firmware/fw_jump.bin -kernel\
u-boot/u-boot.bin
U-Boot SPL on QEMU virt
------------------------
// Compilation of u-boot-spl
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_spl_defconfig
make OPENSBI=opensbi/build/platform/generic/firmware/fw_dynamic.bin // Run 64-bit u-boot-spl in qemu
qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
u-boot/spl/u-boot-spl.bin -device\
loader,file=u-boot/u-boot.itb,addr=0x80200000
Kautuk Consul (2):
arch/riscv: add semihosting support for RISC-V
board: qemu-riscv: enable semihosting
arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++ configs/qemu-riscv32_defconfig | 4 + configs/qemu-riscv32_smode_defconfig | 4 + configs/qemu-riscv32_spl_defconfig | 5 + configs/qemu-riscv64_defconfig | 4 + configs/qemu-riscv64_smode_defconfig | 4 + configs/qemu-riscv64_spl_defconfig | 5 + include/configs/qemu-riscv.h | 2 + 14 files changed, 412 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.c
Signature · 1 line
2.34.1
PATCH 1/2 arch/riscv: add semihosting support for RISC-V
We add RISC-V semihosting based serial console for JTAG based early debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc
--- arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++ 7 files changed, 384 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.c
arch/riscv/Kconfig +45 -0
@@ -371,4 +371,49 @@ config TPL_USE_ARCH_MEMSET endmenu +config SEMIHOSTING + bool "Support RISCV semihosting" + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails" + depends on SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + +config SPL_SEMIHOSTING + bool "Support RISCV semihosting in SPL" + depends on SPL + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SPL_SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails in SPL" + depends on SPL_SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + endmenu
arch/riscv/include/asm/semihosting.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#ifndef __ASM_RISCV_SEMIHOSTING_H +#define __ASM_RISCV_SEMIHOSTING_H + +long smh_trap (int sysnum,void *addr); + +#endif /* __ASM_RISCV_SEMIHOSTING_H */
arch/riscv/include/asm/spl.h +1 -0
@@ -25,6 +25,7 @@ enum {BOOT_DEVICE_DFU ,BOOT_DEVICE_XIP ,BOOT_DEVICE_BOOTROM , +BOOT_DEVICE_SMH , BOOT_DEVICE_NONE };
arch/riscv/lib/Makefile +7 -0
@@ -42,3 +42,10 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o + +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y) +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_mmode.o +else +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_smode.o +endif
arch/riscv/lib/semihosting.c new file +166 -0
166 lines not on this page · raw message
arch/riscv/lib/semihosting_mmode.c new file +77 -0
77 lines not on this page · raw message
arch/riscv/lib/semihosting_smode.c new file +77 -0
77 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH 1/2] arch/riscv: add semihosting support for RISC-V
Quoted 315 lines · Kautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adocSigned-off-by Anup Patel <[email protected]>Signed-off-by Kautuk Consul <[email protected]>--- arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++ 7 files changed, 384 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.carch/riscv/Kconfig +45
-0@@ -371,4 +371,49 @@ config TPL_USE_ARCH_MEMSET endmenu +config SEMIHOSTING + bool "Support RISCV semihosting" + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails" + depends on SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + +config SPL_SEMIHOSTING + bool "Support RISCV semihosting in SPL" + depends on SPL + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SPL_SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails in SPL" + depends on SPL_SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + endmenuarch/riscv/include/asm/semihosting.h new file +11
-0@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#ifndef __ASM_RISCV_SEMIHOSTING_H +#define __ASM_RISCV_SEMIHOSTING_H + +long smh_trap (int sysnum,void *addr); + +#endif /* __ASM_RISCV_SEMIHOSTING_H */ arch/riscv/include/asm/spl.h +1
-0@@ -25,6 +25,7 @@ enum {BOOT_DEVICE_DFU ,BOOT_DEVICE_XIP ,BOOT_DEVICE_BOOTROM , +BOOT_DEVICE_SMH , BOOT_DEVICE_NONE };arch/riscv/lib/Makefile +7
-0@@ -42,3 +42,10 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o + +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y) +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_mmode.o +else +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_smode.o +endifarch/riscv/lib/semihosting.c new file +166
-0@@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> +#include <log.h> +#include <semihosting.h> +#include <asm/semihosting.h> + +#define SYSOPEN 0x01 +#define SYSCLOSE 0x02 +#define SYSWRITEC 0x03 +#define SYSWRITE0 0x04 +#define SYSWRITE 0x05 +#define SYSREAD 0x06 +#define SYSREADC 0x07 +#define SYSISERROR 0x08 +#define SYSSEEK 0x0A +#define SYSFLEN 0x0C +#define SYSERRNO 0x13 + +/** +* smh_errno() - Read the host's errno +* +* This gets the value of the host's errno and negates it. The host's errno may +* or may not be set, so only call this function if a previous semihosting call +* has failed. +* +* Return: a negative error value +*/ +static int smh_errno (void ) +{ +long ret =smh_trap (SYSERRNO ,NULL ); + +if (ret >0 && ret <INT_MAX ) +return -ret; +return -EIO ; +} + +long smh_open (const char *fname,enum smh_open_mode mode) +{ +long fd; +struct smh_open_s { +const char *fname; +unsigned long mode; +size_t len; + } open; + +debug ("%s: file \'%s\', mode \'%u\'\n" , __func__, fname, mode); + + open.fname = fname; + open.len =strlen (fname); + open.mode = mode; + +/* Open the file on the host */ + fd =smh_trap (SYSOPEN , &open); +if (fd ==-1 ) +return smh_errno (); +return fd; +} + +/** +* struct smg_rdwr_s - Arguments for read and write +* @fd: A file descriptor returned from smh_open() +* @memp: Pointer to a buffer of memory of at least @len bytes +* @len: The number of bytes to read or write +*/ +struct smh_rdwr_s { +long fd; +void *memp; +size_t len; +}; + +long smh_read (long fd,void *memp,size_t len) +{ +long ret; +struct smh_rdwr_s read; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + read.fd = fd; + read.memp = memp; + read.len = len; + + ret =smh_trap (SYSREAD , &read); +if (ret <0 ) +return smh_errno (); +return len - ret; +} + +long smh_write (long fd,const void *memp,size_t len,ulong *written) +{ +long ret; +struct smh_rdwr_s write; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + write.fd = fd; + write.memp = (void *)memp; + write.len = len; + + ret =smh_trap (SYSWRITE , &write); + *written = len - ret; +if (ret) +return smh_errno (); +return 0 ; +} + +long smh_close (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSCLOSE , &fd); +if (ret ==-1 ) +return smh_errno (); +return 0 ; +} + +long smh_flen (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSFLEN , &fd); +if (ret ==-1 ) +return smh_errno (); +return ret; +} + +long smh_seek (long fd,long pos) +{ +long ret; +struct smh_seek_s { +long fd; +long pos; + } seek; + +debug ("%s: fd %ld pos %ld\n" , __func__, fd, pos); + + seek.fd = fd; + seek.pos = pos; + + ret =smh_trap (SYSSEEK , &seek); +if (ret) +return smh_errno (); +return 0 ; +} + +int smh_getc (void ) +{ +return smh_trap (SYSREADC ,NULL ); +} + +void smh_putc (char ch) +{ +smh_trap (SYSWRITEC , &ch); +} + +void smh_puts (const char *s) +{ +smh_trap (SYSWRITE0 , (char *)s); +}arch/riscv/lib/semihosting_mmode.c new file +16
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13 + +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile ("\t.option push\n" + "\t.option norvc\n"
arch/riscv/lib/semihosting_mmode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+"\tj 1f\n" +"\t.align 4\n" +"\t1: slli zero, zero, 0x1f\n" +"\tebreak\n" +"\tsrai zero, zero, 7\n" +"\t.option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}
The smh_trap() is exactly same for both M-mode and S-mode so it should be moved to semihosting.c
Also, replacing "\t" in the inline assembly with actual tabs looks cleaner.
Quoted 31 lines
arch/riscv/lib/semihosting_mmode.c new file +31
-0+ +#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asmvolatile ("\t.option push\n" +"\t.option norvc\n" + +"\tj _semihost_test_vector_next\n" +"\t.align 4\n" +"\t_semihost_test_vector:\n" +"\t\tcsrr %[en], mepc\n" +"\t\taddi %[en], %[en], 4\n" +"\t\tcsrw mepc, %[en]\n" +"\t\tadd %[en], zero, zero\n" +"\t\tmret\n" +"\t_semihost_test_vector_next:\n" + +"\tla %[tmp], _semihost_test_vector\n" +"\tcsrrw %[tmp], mtvec, %[tmp]\n" + "\tj 1f\n"
arch/riscv/lib/semihosting_mmode.c line 67
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+"\t.align 4\n" +"\t1: slli zero, zero, 0x1f\n" +"\tebreak\n" +"\tsrai zero, zero, 7\n" +"\tcsrw mtvec, %[tmp]\n" + +"\t.option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory");
Replace "\t" in the inline assembly with actual tabs.
Quoted 32 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+ + try_semihosting = false; + return _semihosting_enabled; +} + +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif arch/riscv/lib/semihosting_smode.c new file +16
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13 + +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile ("\t.option push\n" + "\t.option norvc\n"
arch/riscv/lib/semihosting_smode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+"\tj 1f\n" +"\t.align 4\n" +"\t1: slli zero, zero, 0x1f\n" +"\tebreak\n" +"\tsrai zero, zero, 7\n" +"\t.option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}
Same comment as above.
Quoted 35 lines
arch/riscv/lib/semihosting_smode.c new file +35
-0+ +#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asmvolatile ("\t.option push\n" +"\t.option norvc\n" + +"\tj _semihost_test_vector_next\n" +"\t.align 4\n" +"\t_semihost_test_vector:\n" +"\t\tcsrr %[en], sepc\n" +"\t\taddi %[en], %[en], 4\n" +"\t\tcsrw sepc, %[en]\n" +"\t\tadd %[en], zero, zero\n" +"\t\tsret\n" +"\t_semihost_test_vector_next:\n" + +"\tla %[tmp], _semihost_test_vector\n" +"\tcsrrw %[tmp], stvec, %[tmp]\n" +"\tj 1f\n" +"\t.align 4\n" +"\t1: slli zero, zero, 0x1f\n" +"\tebreak\n" + "\tsrai zero, zero, 7\n"
arch/riscv/lib/semihosting_smode.c line 71
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+"\tcsrw stvec, %[tmp]\n" + +"\t.option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory"); + + try_semihosting = false; +return _semihosting_enabled; +}
Replace "\t" in the inline assembly with actual tabs.
Quoted 9 lines
arch/riscv/lib/semihosting_smode.c new file +6
-1+ +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif --2.34.1
Regards,
Anup
Re: [PATCH 1/2] arch/riscv: add semihosting support for RISC-V
In reply to Kautuk ConsulHi Kautuk,
I've already noted my general remarks on this approach in response to your cover letter. This just has my comments on the RISC-V-specific parts.
Quoted 126 lines · Kautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adocSigned-off-by Anup Patel <[email protected]>Signed-off-by Kautuk Consul <[email protected]>--- arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++ 7 files changed, 384 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.carch/riscv/Kconfig +45
-0@@ -371,4 +371,49 @@ config TPL_USE_ARCH_MEMSET endmenu +config SEMIHOSTING + bool "Support RISCV semihosting" + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails" + depends on SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + +config SPL_SEMIHOSTING + bool "Support RISCV semihosting in SPL" + depends on SPL + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SPL_SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails in SPL" + depends on SPL_SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + endmenuarch/riscv/include/asm/semihosting.h new file +11
-0@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#ifndef __ASM_RISCV_SEMIHOSTING_H +#define __ASM_RISCV_SEMIHOSTING_H + +long smh_trap (int sysnum,void *addr); + +#endif /* __ASM_RISCV_SEMIHOSTING_H */ arch/riscv/include/asm/spl.h +1
-0@@ -25,6 +25,7 @@ enum {BOOT_DEVICE_DFU ,BOOT_DEVICE_XIP ,BOOT_DEVICE_BOOTROM , +BOOT_DEVICE_SMH , BOOT_DEVICE_NONE };arch/riscv/lib/Makefile +7
-0@@ -42,3 +42,10 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o + +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y) +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_mmode.o +else +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_smode.o +endifarch/riscv/lib/semihosting.c new file +0
-0
arch/riscv/lib/semihosting.c line 3
Quoted 3 lines
arch/riscv/lib/semihosting.c new file +3
-0@@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc.
Please retain the original copyright notices when copying files.
Quoted 169 lines
arch/riscv/lib/semihosting.c new file +163
-0+*/ + +#include <common.h> +#include <log.h> +#include <semihosting.h> +#include <asm/semihosting.h> + +#define SYSOPEN 0x01 +#define SYSCLOSE 0x02 +#define SYSWRITEC 0x03 +#define SYSWRITE0 0x04 +#define SYSWRITE 0x05 +#define SYSREAD 0x06 +#define SYSREADC 0x07 +#define SYSISERROR 0x08 +#define SYSSEEK 0x0A +#define SYSFLEN 0x0C +#define SYSERRNO 0x13 + +/** +* smh_errno() - Read the host's errno +* +* This gets the value of the host's errno and negates it. The host's errno may +* or may not be set, so only call this function if a previous semihosting call +* has failed. +* +* Return: a negative error value +*/ +static int smh_errno (void ) +{ +long ret =smh_trap (SYSERRNO ,NULL ); + +if (ret >0 && ret <INT_MAX ) +return -ret; +return -EIO ; +} + +long smh_open (const char *fname,enum smh_open_mode mode) +{ +long fd; +struct smh_open_s { +const char *fname; +unsigned long mode; +size_t len; + } open; + +debug ("%s: file \'%s\', mode \'%u\'\n" , __func__, fname, mode); + + open.fname = fname; + open.len =strlen (fname); + open.mode = mode; + +/* Open the file on the host */ + fd =smh_trap (SYSOPEN , &open); +if (fd ==-1 ) +return smh_errno (); +return fd; +} + +/** +* struct smg_rdwr_s - Arguments for read and write +* @fd: A file descriptor returned from smh_open() +* @memp: Pointer to a buffer of memory of at least @len bytes +* @len: The number of bytes to read or write +*/ +struct smh_rdwr_s { +long fd; +void *memp; +size_t len; +}; + +long smh_read (long fd,void *memp,size_t len) +{ +long ret; +struct smh_rdwr_s read; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + read.fd = fd; + read.memp = memp; + read.len = len; + + ret =smh_trap (SYSREAD , &read); +if (ret <0 ) +return smh_errno (); +return len - ret; +} + +long smh_write (long fd,const void *memp,size_t len,ulong *written) +{ +long ret; +struct smh_rdwr_s write; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + write.fd = fd; + write.memp = (void *)memp; + write.len = len; + + ret =smh_trap (SYSWRITE , &write); + *written = len - ret; +if (ret) +return smh_errno (); +return 0 ; +} + +long smh_close (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSCLOSE , &fd); +if (ret ==-1 ) +return smh_errno (); +return 0 ; +} + +long smh_flen (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSFLEN , &fd); +if (ret ==-1 ) +return smh_errno (); +return ret; +} + +long smh_seek (long fd,long pos) +{ +long ret; +struct smh_seek_s { +long fd; +long pos; + } seek; + +debug ("%s: fd %ld pos %ld\n" , __func__, fd, pos); + + seek.fd = fd; + seek.pos = pos; + + ret =smh_trap (SYSSEEK , &seek); +if (ret) +return smh_errno (); +return 0 ; +} + +int smh_getc (void ) +{ +return smh_trap (SYSREADC ,NULL ); +} + +void smh_putc (char ch) +{ +smh_trap (SYSWRITEC , &ch); +} + +void smh_puts (const char *s) +{ +smh_trap (SYSWRITE0 , (char *)s); +}arch/riscv/lib/semihosting_mmode.c new file +0
-0
arch/riscv/lib/semihosting_mmode.c line 8
Quoted 8 lines
arch/riscv/lib/semihosting_mmode.c new file +8
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13
Maybe we should move these defines to semihosting.h?
Quoted 8 lines
arch/riscv/lib/semihosting_mmode.c new file +8
-0+ +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile (" .option push\n" + " .option norvc\n"
arch/riscv/lib/semihosting_mmode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" .option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}
I wonder if we should just do this in a .S file. I was thinking about this for arm; I think it will be cleaner than inline assembly.
Quoted 31 lines
arch/riscv/lib/semihosting_mmode.c new file +31
-0+ +#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asmvolatile (" .option push\n" +" .option norvc\n" + +" j _semihost_test_vector_next\n" +" .align 4\n" +" _semihost_test_vector:\n" +" csrr %[en], mepc\n" +" addi %[en], %[en], 4\n" +" csrw mepc, %[en]\n" +" add %[en], zero, zero\n" +" mret\n" +" _semihost_test_vector_next:\n" + +" la %[tmp], _semihost_test_vector\n" +" csrrw %[tmp], mtvec, %[tmp]\n" + " j 1f\n"
arch/riscv/lib/semihosting_mmode.c line 67
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" csrw mtvec, %[tmp]\n" + +" .option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory");
Can you comment on why you chose this approach (setting a new trap vector when testing for semihosting) as opposed to the approach used on arm (extending the existing trap vector) or reading DCSR.EBREAKx? The advantage of extending the existing trap vector is that the user can disconnect the debugger and U-Boot will continue running (albeit perhaps in a state of reduced functionality). There is also never a window where we can crash with no output (since the original trap handler remains in place). The disadvantage is that we have to add some extra code so we are very sure that we have a semihosting halt (instead of some other illegal instruction).
The other option is to just read DCSR.EBREAKx directly [1]. I think this could be the cleanest approach, since we can add a check in smh_trap, avoiding the ebreak completely if there's no debugger attached. I'm not sure if this csr is readable by regular code (maybe you have to be in D-mode). There's also a small race condition if the debugger is detached in between when we check DCSR.EBREAKx and when we execute ebreak.
Quoted 31 lines
arch/riscv/lib/semihosting_mmode.c new file +9
-0+ try_semihosting = false; + return _semihosting_enabled; +} + +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif arch/riscv/lib/semihosting_smode.c new file +16
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13 + +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile (" .option push\n" + " .option norvc\n"
arch/riscv/lib/semihosting_smode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" .option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}
This looks identical to the M-mode version.
Quoted 15 lines
arch/riscv/lib/semihosting_smode.c new file +15
-0+#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asm volatile (" .option push\n"
arch/riscv/lib/semihosting_smode.c line 51
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+" .option norvc\n" + +" j _semihost_test_vector_next\n" +" .align 4\n" +" _semihost_test_vector:\n" +" csrr %[en], sepc\n" +" addi %[en], %[en], 4\n" +" csrw sepc, %[en]\n" +" add %[en], zero, zero\n" +" sret\n"
As does this, with the exception of the csrs and rets. I think we have some macros to abstract this sort of thing away.
Quoted 26 lines
arch/riscv/lib/semihosting_smode.c new file +25
-1+" _semihost_test_vector_next:\n" + +" la %[tmp], _semihost_test_vector\n" +" csrrw %[tmp], stvec, %[tmp]\n" +" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" csrw stvec, %[tmp]\n" + +" .option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory"); + + try_semihosting = false; + return _semihosting_enabled; +} + +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif --
Quoted 2 lines
2.34.1
--Sean
Re: [PATCH 1/2] arch/riscv: add semihosting support for RISC-V
Hi Sean,
Don't know about the DCSR.EBREAK option but it will be better for us to extend the existing trap vector functionality as you mentioned. Will handle this in v2. This also removes the need for us to implement our semihosting_enabled() in inline assembly as it will become a generic lib/semihosting.c function.
Quoted 508 lines · Sean Anderson
Hi Kautuk,
I've already noted my general remarks on this approach in response to your cover letter. This just has my comments on the RISC-V-specific parts.
Quoted 126 lines · Kautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adocSigned-off-by Anup Patel <[email protected]>Signed-off-by Kautuk Consul <[email protected]>--- arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++ 7 files changed, 384 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.carch/riscv/Kconfig +45
-0@@ -371,4 +371,49 @@ config TPL_USE_ARCH_MEMSET endmenu +config SEMIHOSTING + bool "Support RISCV semihosting" + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails" + depends on SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + +config SPL_SEMIHOSTING + bool "Support RISCV semihosting in SPL" + depends on SPL + help + Semihosting is a method for a target to communicate with a host + debugger. It uses special instructions which the debugger will trap + on and interpret. This allows U-Boot to read/write files, print to + the console, and execute arbitrary commands on the host system. + + Enabling this option will add support for reading and writing files + on the host system. If you don't have a debugger attached then trying + to do this will likely cause U-Boot to hang. Say 'n' if you are unsure. + +config SPL_SEMIHOSTING_FALLBACK + bool "Recover gracefully when semihosting fails in SPL" + depends on SPL_SEMIHOSTING && RISCV + default y + help + Normally, if U-Boot makes a semihosting call and no debugger is + attached, then it will panic due to a synchronous abort + exception. This config adds an exception handler which will allow + U-Boot to recover. Say 'y' if unsure. + endmenuarch/riscv/include/asm/semihosting.h new file +11
-0@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#ifndef __ASM_RISCV_SEMIHOSTING_H +#define __ASM_RISCV_SEMIHOSTING_H + +long smh_trap (int sysnum,void *addr); + +#endif /* __ASM_RISCV_SEMIHOSTING_H */ arch/riscv/include/asm/spl.h +1
-0@@ -25,6 +25,7 @@ enum {BOOT_DEVICE_DFU ,BOOT_DEVICE_XIP ,BOOT_DEVICE_BOOTROM , +BOOT_DEVICE_SMH , BOOT_DEVICE_NONE };arch/riscv/lib/Makefile +7
-0@@ -42,3 +42,10 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o + +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y) +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_mmode.o +else +obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting_smode.o +endifarch/riscv/lib/semihosting.c new file +0
-0arch/riscv/lib/semihosting.c line 3
Quoted 3 lines
arch/riscv/lib/semihosting.c new file +3
-0@@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. Please retain the original copyright notices when copying files.
Quoted 169 lines
arch/riscv/lib/semihosting.c new file +163
-0+*/ + +#include <common.h> +#include <log.h> +#include <semihosting.h> +#include <asm/semihosting.h> + +#define SYSOPEN 0x01 +#define SYSCLOSE 0x02 +#define SYSWRITEC 0x03 +#define SYSWRITE0 0x04 +#define SYSWRITE 0x05 +#define SYSREAD 0x06 +#define SYSREADC 0x07 +#define SYSISERROR 0x08 +#define SYSSEEK 0x0A +#define SYSFLEN 0x0C +#define SYSERRNO 0x13 + +/** +* smh_errno() - Read the host's errno +* +* This gets the value of the host's errno and negates it. The host's errno may +* or may not be set, so only call this function if a previous semihosting call +* has failed. +* +* Return: a negative error value +*/ +static int smh_errno (void ) +{ +long ret =smh_trap (SYSERRNO ,NULL ); + +if (ret >0 && ret <INT_MAX ) +return -ret; +return -EIO ; +} + +long smh_open (const char *fname,enum smh_open_mode mode) +{ +long fd; +struct smh_open_s { +const char *fname; +unsigned long mode; +size_t len; + } open; + +debug ("%s: file \'%s\', mode \'%u\'\n" , __func__, fname, mode); + + open.fname = fname; + open.len =strlen (fname); + open.mode = mode; + +/* Open the file on the host */ + fd =smh_trap (SYSOPEN , &open); +if (fd ==-1 ) +return smh_errno (); +return fd; +} + +/** +* struct smg_rdwr_s - Arguments for read and write +* @fd: A file descriptor returned from smh_open() +* @memp: Pointer to a buffer of memory of at least @len bytes +* @len: The number of bytes to read or write +*/ +struct smh_rdwr_s { +long fd; +void *memp; +size_t len; +}; + +long smh_read (long fd,void *memp,size_t len) +{ +long ret; +struct smh_rdwr_s read; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + read.fd = fd; + read.memp = memp; + read.len = len; + + ret =smh_trap (SYSREAD , &read); +if (ret <0 ) +return smh_errno (); +return len - ret; +} + +long smh_write (long fd,const void *memp,size_t len,ulong *written) +{ +long ret; +struct smh_rdwr_s write; + +debug ("%s: fd %ld, memp %p, len %zu\n" , __func__, fd, memp, len); + + write.fd = fd; + write.memp = (void *)memp; + write.len = len; + + ret =smh_trap (SYSWRITE , &write); + *written = len - ret; +if (ret) +return smh_errno (); +return 0 ; +} + +long smh_close (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSCLOSE , &fd); +if (ret ==-1 ) +return smh_errno (); +return 0 ; +} + +long smh_flen (long fd) +{ +long ret; + +debug ("%s: fd %ld\n" , __func__, fd); + + ret =smh_trap (SYSFLEN , &fd); +if (ret ==-1 ) +return smh_errno (); +return ret; +} + +long smh_seek (long fd,long pos) +{ +long ret; +struct smh_seek_s { +long fd; +long pos; + } seek; + +debug ("%s: fd %ld pos %ld\n" , __func__, fd, pos); + + seek.fd = fd; + seek.pos = pos; + + ret =smh_trap (SYSSEEK , &seek); +if (ret) +return smh_errno (); +return 0 ; +} + +int smh_getc (void ) +{ +return smh_trap (SYSREADC ,NULL ); +} + +void smh_putc (char ch) +{ +smh_trap (SYSWRITEC , &ch); +} + +void smh_puts (const char *s) +{ +smh_trap (SYSWRITE0 , (char *)s); +}arch/riscv/lib/semihosting_mmode.c new file +0
-0arch/riscv/lib/semihosting_mmode.c line 8
Quoted 8 lines
arch/riscv/lib/semihosting_mmode.c new file +8
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13Maybe we should move these defines to
semihosting.h?Quoted 8 lines
arch/riscv/lib/semihosting_mmode.c new file +8
-0+ +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile (" .option push\n" + " .option norvc\n"arch/riscv/lib/semihosting_mmode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" .option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}I wonder if we should just do this in a .S file. I was thinking about this for arm; I think it will be cleaner than inline assembly.
Quoted 31 lines
arch/riscv/lib/semihosting_mmode.c new file +31
-0+ +#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asmvolatile (" .option push\n" +" .option norvc\n" + +" j _semihost_test_vector_next\n" +" .align 4\n" +" _semihost_test_vector:\n" +" csrr %[en], mepc\n" +" addi %[en], %[en], 4\n" +" csrw mepc, %[en]\n" +" add %[en], zero, zero\n" +" mret\n" +" _semihost_test_vector_next:\n" + +" la %[tmp], _semihost_test_vector\n" +" csrrw %[tmp], mtvec, %[tmp]\n" + " j 1f\n"arch/riscv/lib/semihosting_mmode.c line 67
Quoted 10 lines
arch/riscv/lib/semihosting_mmode.c new file +10
-0+" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" csrw mtvec, %[tmp]\n" + +" .option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory");Can you comment on why you chose this approach (setting a new trap vector when testing for semihosting) as opposed to the approach used on arm (extending the existing trap vector) or reading DCSR.EBREAKx? The advantage of extending the existing trap vector is that the user can disconnect the debugger and U-Boot will continue running (albeit perhaps in a state of reduced functionality). There is also never a window where we can crash with no output (since the original trap handler remains in place). The disadvantage is that we have to add some extra code so we are very sure that we have a semihosting halt (instead of some other illegal instruction).
The other option is to just read DCSR.EBREAKx directly [1]. I think this could be the cleanest approach, since we can add a check in
smh_trap, avoiding the ebreak completely if there's no debugger attached. I'm not sure if this csr is readable by regular code (maybe you have to be in D-mode). There's also a small race condition if the debugger is detached in between when we check DCSR.EBREAKx and when we execute ebreak.Quoted 31 lines
arch/riscv/lib/semihosting_mmode.c new file +9
-0+ try_semihosting = false; + return _semihosting_enabled; +} + +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif arch/riscv/lib/semihosting_smode.c new file +16
-0@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Ventana Micro Systems Inc. +*/ + +#include <common.h> + +#define SYSERRNO 0x13 + +long smh_trap (int sysnum,void *addr) +{ + register int ret asm ("a0") = sysnum; + register void *param0 asm ("a1") = addr; + + asmvolatile (" .option push\n" + " .option norvc\n"arch/riscv/lib/semihosting_smode.c line 26
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" .option pop\n" + : "+r" (ret) : "r" (param0) : "memory"); + + return ret; +}This looks identical to the M-mode version.
Quoted 15 lines
arch/riscv/lib/semihosting_smode.c new file +15
-0+#if CONFIG_IS_ENABLED (SEMIHOSTING_FALLBACK ) +static bool _semihosting_enabled = true; +static bool try_semihosting = true; + +bool semihosting_enabled (void ) +{ +unsigned long tmp =0 ; + + register int ret asm ("a0") = SYSERRNO; + register void *param0 asm ("a1") = NULL; + +if (!try_semihosting) +return _semihosting_enabled; + + asm volatile (" .option push\n"arch/riscv/lib/semihosting_smode.c line 51
Quoted 10 lines
arch/riscv/lib/semihosting_smode.c new file +10
-0+" .option norvc\n" + +" j _semihost_test_vector_next\n" +" .align 4\n" +" _semihost_test_vector:\n" +" csrr %[en], sepc\n" +" addi %[en], %[en], 4\n" +" csrw sepc, %[en]\n" +" add %[en], zero, zero\n" +" sret\n" As does this, with the exception of the csrs and rets. I think we have some macros to abstract this sort of thing away.
Quoted 26 lines
arch/riscv/lib/semihosting_smode.c new file +25
-1+" _semihost_test_vector_next:\n" + +" la %[tmp], _semihost_test_vector\n" +" csrrw %[tmp], stvec, %[tmp]\n" +" j 1f\n" +" .align 4\n" +" 1: slli zero, zero, 0x1f\n" +" ebreak\n" +" srai zero, zero, 7\n" +" csrw stvec, %[tmp]\n" + +" .option pop\n" + : [tmp] "+r" (tmp), [en] "+r" (_semihosting_enabled), + [ret] "+r" (ret) + : "r" (param0) : "memory"); + + try_semihosting = false; + return _semihosting_enabled; +} + +void disable_semihosting (void ) +{ + _semihosting_enabled = false; +} +#endif --Quoted 2 lines
2.34.1
--Sean
Hi Kautuk,
Quoted 39 lines · Kautuk Consul
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
Semihosting is a mechanism that enables code running on a target to communicate and use the Input/Output facilities on a host computer that is running a debugger. This patchset adds support for semihosting in u-boot for RISCV64 targets.
Compilation and test commands for SPL and S-mode configurations
=================================================================U-Boot S-mode on QEMU virt
----------------------------
// Compilation of S-mode u-boot
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_smode_defconfig
make
// Run riscv 64-bit u-boot with opensbi on qemu qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
opensbi/build/platform/generic/firmware/fw_jump.bin -kernel\
u-boot/u-boot.binU-Boot SPL on QEMU virt
------------------------
// Compilation of u-boot-spl
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_spl_defconfig
make OPENSBI=opensbi/build/platform/generic/firmware/fw_dynamic.bin // Run 64-bit u-boot-spl in qemu
qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
u-boot/spl/u-boot-spl.bin -device\
loader,file=u-boot/u-boot.itb,addr=0x80200000Kautuk Consul (2):
arch/riscv: add semihosting support for RISC-V
board: qemu-riscv: enable semihosting
Quoted 7 lines
arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++
I don't think this is the right approach. The semihosting ABI is effectively identical on Arm and RISC-V, with the exception of the actual trap instruction. I think we should add support for RISC-V by moving the semihosting code (and Kconfig options) to e.g. lib/, and reduce the arch-specific code to just smh_trap (and any exception handlers).
Does that seem reasonable to you?
--Sean
Quoted 16 lines
configs/qemu-riscv32_defconfig | 4 + configs/qemu-riscv32_smode_defconfig | 4 + configs/qemu-riscv32_spl_defconfig | 5 + configs/qemu-riscv64_defconfig | 4 + configs/qemu-riscv64_smode_defconfig | 4 + configs/qemu-riscv64_spl_defconfig | 5 + include/configs/qemu-riscv.h | 2 + 14 files changed, 412 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.c--
2.34.1
Hi Sean,
Will address your comment in v2 by moving the ARM and RISCV code to generic lib/semihosting.c.
Quoted 78 lines · Sean Anderson
Hi Kautuk,
Quoted 39 lines · Kautuk Consul
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
Semihosting is a mechanism that enables code running on a target to communicate and use the Input/Output facilities on a host computer that is running a debugger. This patchset adds support for semihosting in u-boot for RISCV64 targets.
Compilation and test commands for SPL and S-mode configurations
=================================================================U-Boot S-mode on QEMU virt
----------------------------
// Compilation of S-mode u-boot
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_smode_defconfig
make
// Run riscv 64-bit u-boot with opensbi on qemu qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
opensbi/build/platform/generic/firmware/fw_jump.bin -kernel\
u-boot/u-boot.binU-Boot SPL on QEMU virt
------------------------
// Compilation of u-boot-spl
ARCH=riscv
CROSS_COMPILE=riscv64-unknown-linux-gnu-
make qemu-riscv64_spl_defconfig
make OPENSBI=opensbi/build/platform/generic/firmware/fw_dynamic.bin // Run 64-bit u-boot-spl in qemu
qemu-system-riscv64 -M virt -m 256M -display none -serial stdio -bios\
u-boot/spl/u-boot-spl.bin -device\
loader,file=u-boot/u-boot.itb,addr=0x80200000Kautuk Consul (2):
arch/riscv: add semihosting support for RISC-V
board: qemu-riscv: enable semihostingQuoted 7 lines
arch/riscv/Kconfig | 45 ++++++++ arch/riscv/include/asm/semihosting.h | 11 ++ arch/riscv/include/asm/spl.h | 1 + arch/riscv/lib/Makefile | 7 ++ arch/riscv/lib/semihosting.c | 166 +++++++++++++++++++++++++++ arch/riscv/lib/semihosting_mmode.c | 77 +++++++++++++ arch/riscv/lib/semihosting_smode.c | 77 +++++++++++++I don't think this is the right approach. The semihosting ABI is effectively identical on Arm and RISC-V, with the exception of the actual trap instruction. I think we should add support for RISC-V by moving the semihosting code (and
Kconfigoptions) to e.g.lib/, and reduce the arch-specific code to justsmh_trap(and any exception handlers).Does that seem reasonable to you?
--Sean
Quoted 16 lines
configs/qemu-riscv32_defconfig | 4 + configs/qemu-riscv32_smode_defconfig | 4 + configs/qemu-riscv32_spl_defconfig | 5 + configs/qemu-riscv64_defconfig | 4 + configs/qemu-riscv64_smode_defconfig | 4 + configs/qemu-riscv64_spl_defconfig | 5 + include/configs/qemu-riscv.h | 2 + 14 files changed, 412 insertions(+) create mode 100644 arch/riscv/include/asm/semihosting.h create mode 100644 arch/riscv/lib/semihosting.c create mode 100644 arch/riscv/lib/semihosting_mmode.c create mode 100644 arch/riscv/lib/semihosting_smode.c--
2.34.1
PATCH 2/2 board: qemu-riscv: enable semihosting
In reply to Kautuk ConsulTo use semihosting on qemu RISCV virt machine, we need the CONFIG_SPL_FS_LOAD_PAYLOAD_NAME define in qemu-riscv.h.
We also need to enable the following configs in defconfigs:CONFIG_SEMIHOSTINGCONFIG_SPL_SEMIHOSTINGCONFIG_SEMIHOSTING_SERIALCONFIG_SERIAL_PROBE_ALL
--- configs/qemu-riscv32_defconfig | 4 ++++ configs/qemu-riscv32_smode_defconfig | 4 ++++ configs/qemu-riscv32_spl_defconfig | 5 +++++ configs/qemu-riscv64_defconfig | 4 ++++ configs/qemu-riscv64_smode_defconfig | 4 ++++ configs/qemu-riscv64_spl_defconfig | 5 +++++ include/configs/qemu-riscv.h | 2 ++ 7 files changed, 28 insertions(+)
configs/qemu-riscv32_defconfig +4 -0
@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -20,3 +21,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y
configs/qemu-riscv32_smode_defconfig +4 -0
@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -21,4 +22,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y
configs/qemu-riscv32_spl_defconfig +5 -0
@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not set
configs/qemu-riscv64_defconfig +4 -0
@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -21,3 +22,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y
configs/qemu-riscv64_smode_defconfig +4 -0
@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -24,4 +25,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y
configs/qemu-riscv64_spl_defconfig +5 -0
@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not set
include/configs/qemu-riscv.h +2 -0
@@ -48,4 +48,6 @@"ramdisk_addr_r=0x8c300000\0" \ BOOTENV +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb" +#endif /* __CONFIG_H */
Signature · 1 line
2.34.1
Re: [PATCH 2/2] board: qemu-riscv: enable semihosting
Quoted 33 lines · Kautuk Consul
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
To use semihosting on qemu RISCV virt machine, we need the
CONFIG_SPL_FS_LOAD_PAYLOAD_NAMEdefine inqemu-riscv.h.We also need to enable the following configs in defconfigs:
CONFIG_SEMIHOSTINGCONFIG_SPL_SEMIHOSTINGCONFIG_SEMIHOSTING_SERIALCONFIG_SERIAL_PROBE_ALLSigned-off-by Kautuk Consul <[email protected]>--- configs/qemu-riscv32_defconfig | 4 ++++ configs/qemu-riscv32_smode_defconfig | 4 ++++ configs/qemu-riscv32_spl_defconfig | 5 +++++ configs/qemu-riscv64_defconfig | 4 ++++ configs/qemu-riscv64_smode_defconfig | 4 ++++ configs/qemu-riscv64_spl_defconfig | 5 +++++ include/configs/qemu-riscv.h | 2 ++ 7 files changed, 28 insertions(+)configs/qemu-riscv32_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000
configs/qemu-riscv32_defconfig CONFIG_CMD_NVEDIT_EFI=y · line 24
Quoted 4 lines
configs/qemu-riscv32_defconfig +1
-0@@ -20,3 +21,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set
Does this have any affect on performance? It does for hardware, but for software the overhead should be much smaller.
Quoted 100 lines
configs/qemu-riscv32_defconfig +2
-0+CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=yconfigs/qemu-riscv32_smode_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -21,4 +22,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=yconfigs/qemu-riscv32_spl_defconfig +5
-0@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not setconfigs/qemu-riscv64_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -21,3 +22,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=yconfigs/qemu-riscv64_smode_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -24,4 +25,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=yconfigs/qemu-riscv64_spl_defconfig +5
-0@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not setinclude/configs/qemu-riscv.h +0
-0
include/configs/qemu-riscv.h line 51
Quoted 4 lines
include/configs/qemu-riscv.h +1
-0@@ -48,4 +48,6 @@"ramdisk_addr_r=0x8c300000\0" \BOOTENV +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
This is a Kconfig since 4a11e34bc9c ("Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to Kconfig")
Quoted 4 lines
include/configs/qemu-riscv.h +0
-1#endif /* __CONFIG_H */ --2.34.1
Re: [PATCH 2/2] board: qemu-riscv: enable semihosting
Hi Sean,
Thanks for the comments. Will address them in v2.
Quoted 157 lines · Sean Anderson
Quoted 33 lines · Kautuk Consul
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
To use semihosting on qemu RISCV virt machine, we need the
CONFIG_SPL_FS_LOAD_PAYLOAD_NAMEdefine inqemu-riscv.h.We also need to enable the following configs in defconfigs:
CONFIG_SEMIHOSTINGCONFIG_SPL_SEMIHOSTINGCONFIG_SEMIHOSTING_SERIALCONFIG_SERIAL_PROBE_ALLSigned-off-by Kautuk Consul <[email protected]>--- configs/qemu-riscv32_defconfig | 4 ++++ configs/qemu-riscv32_smode_defconfig | 4 ++++ configs/qemu-riscv32_spl_defconfig | 5 +++++ configs/qemu-riscv64_defconfig | 4 ++++ configs/qemu-riscv64_smode_defconfig | 4 ++++ configs/qemu-riscv64_spl_defconfig | 5 +++++ include/configs/qemu-riscv.h | 2 ++ 7 files changed, 28 insertions(+)configs/qemu-riscv32_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000configs/qemu-riscv32_defconfig CONFIG_CMD_NVEDIT_EFI=y · line 24
Quoted 4 lines
configs/qemu-riscv32_defconfig +1
-0@@ -20,3 +21,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not setDoes this have any affect on performance? It does for hardware, but for software the overhead should be much smaller.
Quoted 100 lines
configs/qemu-riscv32_defconfig +2
-0+CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=yconfigs/qemu-riscv32_smode_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -21,4 +22,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=yconfigs/qemu-riscv32_spl_defconfig +5
-0@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not setconfigs/qemu-riscv64_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -21,3 +22,6 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=yconfigs/qemu-riscv64_smode_defconfig +4
-0@@ -1,4 +1,5 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -24,4 +25,7 @@ CONFIG_CMD_NVEDIT_EFI=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=yconfigs/qemu-riscv64_spl_defconfig +5
-0@@ -1,4 +1,6 @@ CONFIG_RISCV=y +CONFIG_SEMIHOSTING=y +CONFIG_SPL_SEMIHOSTING=y CONFIG_SYS_MALLOC_LEN=0x800000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000@@ -25,5 +27,8 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y CONFIG_SYS_MAX_FLASH_BANKS=2 +# CONFIG_SERIAL_PUTS is not set +CONFIG_SERIAL_PROBE_ALL=y +CONFIG_SEMIHOSTING_SERIAL=y CONFIG_SYSRESET_SBI=y # CONFIG_BINMAN_FDT is not setinclude/configs/qemu-riscv.h +0
-0include/configs/qemu-riscv.h line 51
Quoted 4 lines
include/configs/qemu-riscv.h +1
-0@@ -48,4 +48,6 @@"ramdisk_addr_r=0x8c300000\0" \BOOTENV +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"This is a
Kconfigsince4a11e34bc9c("ConvertCONFIG_SPL_FS_LOAD_PAYLOAD_NAMEet al toKconfig")Quoted 4 lines
include/configs/qemu-riscv.h +0
-1#endif /* __CONFIG_H */ --2.34.1