Skip to contentSkip to conversation

dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg

PATCH Applied Christian Marangi 2 participants 2 messages Sep 16, 2022 – Sep 29, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg

The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code.

While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function.

To fix this, drop returning error pointer and return NULL with an error log.

Fixes 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config")
Fixes 5c9f8c2dbdbe ("dmaengine: qcom: Add ADM driver")
Cc [email protected] # v5.11+
---
 drivers/dma/qcom/qcom_adm.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)
drivers/dma/qcom/qcom_adm.c +13 -7
index facdacf8aede..cd3f12cf4721 100644
@@ -379,13 +379,13 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 		if (blk_size < 0) {
 			dev_err(adev->dev, "invalid burst value: %d\n",
 				burst);
-			return ERR_PTR(-EINVAL);
+			return NULL;
 		}
 
 		crci = achan->crci & 0xf;
 		if (!crci || achan->crci > 0x1f) {
 			dev_err(adev->dev, "invalid crci value\n");
-			return ERR_PTR(-EINVAL);
+			return NULL;
 		}
 	}
 
@@ -403,8 +403,10 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 	}
 
 	async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
-	if (!async_desc)
-		return ERR_PTR(-ENOMEM);
+	if (!async_desc) {
+		dev_err(adev->dev, "not enough memory for async_desc struct\n");
+		return NULL;
+	}
 
 	async_desc->mux = achan->mux ? ADM_CRCI_CTL_MUX_SEL : 0;
 	async_desc->crci = crci;
@@ -414,8 +416,10 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 				sizeof(*cple) + 2 * ADM_DESC_ALIGN;
 
 	async_desc->cpl = kzalloc(async_desc->dma_len, GFP_NOWAIT);
-	if (!async_desc->cpl)
+	if (!async_desc->cpl) {
+		dev_err(adev->dev, "not enough memory for cpl struct\n");
 		goto free;
+	}
 
 	async_desc->adev = adev;
 
@@ -437,8 +441,10 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 	async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
 					      async_desc->dma_len,
 					      DMA_TO_DEVICE);
-	if (dma_mapping_error(adev->dev, async_desc->dma_addr))
+	if (dma_mapping_error(adev->dev, async_desc->dma_addr)) {
+		dev_err(adev->dev, "dma mapping error for cpl\n");
 		goto free;
+	}
 
 	cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
 
@@ -454,7 +460,7 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
 
 free:
 	kfree(async_desc);
-	return ERR_PTR(-ENOMEM);
+	return NULL;
 }
 
 /**
Signature · 1 line
2.37.2
maintainer Applied
#1 lore raw
Quoted 8 lines · Christian Marangi

The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code.

Quoted 6 lines

While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function.

To fix this, drop returning error pointer and return NULL with an error log.

Applied, thanks

Signature · 1 line
~Vinod