cmd: sf: Handle unaligned 'update' start offset
PATCH 1/1 cmd: sf: Handle unaligned 'update' start offset
Currently the 'sf update' command fails in case the 'start' offset is not aligned to SPI NOR erase block size. Add the missing alignment calculation. In case the start offset is in the middle of erase block, round start address down to the nearest aligned one, compare only the updated data between what is in the SPI NOR and what is being written, copy new data at offset of the compare buffer, and write back the entire erase block.
This is useful e.g. on i.MX6Q where the u-boot-with-spl.imx is at offset 0x400 in the SPI NOR, while the SPI NOR may have erase block size e.g. 0x1000 bytes.
---
Cc: Bin Meng <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Pratyush Yadav <[email protected]>
Cc: Sean Anderson <[email protected]>
--- cmd/sf.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
cmd/sf.c +11 -7
@@ -179,16 +179,18 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, size_t len, const char *buf, char *cmp_buf, size_t *skipped) { char *ptr = (char *)buf; +u32 start_offset = offset % flash->sector_size; +u32 read_offset = offset - start_offset; -debug ("offset=%#x, sector_size=%#x, len=%#zx\n" , - offset, flash->sector_size, len); +debug ("offset=%#x+%#x, sector_size=%#x, len=%#zx\n" , + read_offset, start_offset, flash->sector_size, len);/* Read the entire sector so to allow for rewriting */ -if (spi_flash_read (flash, offset, flash->sector_size, cmp_buf)) +if (spi_flash_read (flash, read_offset, flash->sector_size, cmp_buf))return "read" ;/* Compare only what is meaningful (len) */ -if (memcmp (cmp_buf, buf, len) ==0 ) { -debug ("Skip region %x size %zx: no change\n" , - offset, len); +if (memcmp (cmp_buf + start_offset, buf, len) ==0 ) { +debug ("Skip region %x+%x size %zx: no change\n" , + start_offset, read_offset, len); *skipped += len;return NULL ; }
@@ -197,7 +199,7 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset,return "erase" ;/* If it's a partial sector, copy the data into the temp-buffer */ if (len != flash->sector_size) { -memcpy (cmp_buf, buf, len); +memcpy (cmp_buf + start_offset, buf, len); ptr = cmp_buf; }/* Write one complete sector */
@@ -238,6 +240,8 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset,for (; buf < end && !err_oper; buf += todo, offset += todo) { todo =min_t (size_t, end - buf, flash->sector_size); + todo =min_t (size_t, end - buf, + flash->sector_size - (offset % flash->sector_size));if (get_timer (last_update) >100 ) { printf(" \rUpdating, %zu%% %lu B/s", 100 - (end - buf) / scale,
Signature · 1 line
2.35.1
Quoted 9 lines · Marek Vasut
Currently the 'sf update' command fails in case the 'start' offset is not aligned to SPI NOR erase block size. Add the missing alignment calculation. In case the start offset is in the middle of erase block, round start address down to the nearest aligned one, compare only the updated data between what is in the SPI NOR and what is being written, copy new data at offset of the compare buffer, and write back the entire erase block.
Quoted 6 lines
This is useful e.g. on i.MX6Q where the u-boot-with-spl.imx is at offset
0x400in the SPI NOR, while the SPI NOR may have erase block size e.g.0x1000bytes.Signed-off-by Marek Vasut <[email protected]>---