clk: gcc-sc8280xp: use retention for USB power domains
Subsystems (3)
PATCH 1/1 clk: gcc-sc8280xp: use retention for USB power domains
Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on.
This is needed to eventually allow the parent CX domain to be powered down during suspend.
--- drivers/clk/qcom/gcc-sc8280xp.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
While we're not yet able to fully test this (since we're not hitting CX power down) this can still go in as we'll need it in some form eventually.
Note that the PCIe domains should remain always-on until we have driver support for suspend in place.
Johan
drivers/clk/qcom/gcc-sc8280xp.c +3 -10
@@ -6843,17 +6843,12 @@ static struct gdsc ufs_phy_gdsc = { .pwrsts = PWRSTS_OFF_ON, }; -/* -* The Qualcomm DWC3 driver suspend implementation appears to be incomplete -* for sc8280xp so keep the USB power domains always-on for now. -*/ static struct gdsc usb30_mp_gdsc = { .gdscr =0xab004 , .pd = { .name ="usb30_mp_gdsc" , }, - .pwrsts =PWRSTS_OFF_ON , - .flags =ALWAYS_ON , + .pwrsts =PWRSTS_RET_ON , };static struct gdsc usb30_prim_gdsc = {
@@ -6861,8 +6856,7 @@ static struct gdsc usb30_prim_gdsc = { .pd = { .name = "usb30_prim_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct gdsc usb30_sec_gdsc = {
@@ -6870,8 +6864,7 @@ static struct gdsc usb30_sec_gdsc = { .pd = { .name = "usb30_sec_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct clk_regmap *gcc_sc8280xp_clocks[] = {
Signature · 1 line
2.35.1
Quoted 8 lines · Johan Hovold
Since commit
d399723950c4("clk: qcom: gdsc: Fix the handling ofPWRSTS_RETsupport) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on.This is needed to eventually allow the parent CX domain to be powered down during suspend.
[...]
Applied, thanks!
[1/1] clk: gcc-sc8280xp: use retention for USB power domains
commit: 27da533af9b050e751a419c743096d06017daf0e
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>
Quoted 9 lines · Johan Hovold
Since commit
d399723950c4("clk: qcom: gdsc: Fix the handling ofPWRSTS_RETsupport) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on.This is needed to eventually allow the parent CX domain to be powered down during suspend.
Signed-off-by Johan Hovold <[email protected]>---
Konrad
Quoted 56 lines
drivers/clk/qcom/gcc-sc8280xp.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)While we're not yet able to fully test this (since we're not hitting CX power down) this can still go in as we'll need it in some form eventually.
Note that the PCIe domains should remain always-on until we have driver support for suspend in place.
Johan
drivers/clk/qcom/gcc-sc8280xp.c +3
-10@@ -6843,17 +6843,12 @@ static struct gdsc ufs_phy_gdsc = { .pwrsts = PWRSTS_OFF_ON, }; -/* -* The Qualcomm DWC3 driver suspend implementation appears to be incomplete -* for sc8280xp so keep the USB power domains always-on for now. -*/ static struct gdsc usb30_mp_gdsc = { .gdscr =0xab004 , .pd = { .name ="usb30_mp_gdsc" , }, - .pwrsts =PWRSTS_OFF_ON , - .flags =ALWAYS_ON , + .pwrsts =PWRSTS_RET_ON , };static struct gdsc usb30_prim_gdsc = {@@ -6861,8 +6856,7 @@ static struct gdsc usb30_prim_gdsc = { .pd = { .name = "usb30_prim_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct gdsc usb30_sec_gdsc = {@@ -6870,8 +6864,7 @@ static struct gdsc usb30_sec_gdsc = { .pd = { .name = "usb30_sec_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct clk_regmap *gcc_sc8280xp_clocks[] = {
Quoted 7 lines · Johan Hovold
Since commit
d399723950c4("clk: qcom: gdsc: Fix the handling ofPWRSTS_RETsupport) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on.This is needed to eventually allow the parent CX domain to be powered down during suspend.
Quoted 8 lines
Signed-off-by Johan Hovold <[email protected]>--- drivers/clk/qcom/gcc-sc8280xp.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)While we're not yet able to fully test this (since we're not hitting CX power down) this can still go in as we'll need it in some form eventually.
If sc8280xp supports CX power down, it would be good to also put in the cxcs offsets so USB RET still works even when you do hit CX power down some time in the future.
Quoted 50 lines
Note that the PCIe domains should remain always-on until we have driver support for suspend in place.
Johan
drivers/clk/qcom/gcc-sc8280xp.c +3
-10@@ -6843,17 +6843,12 @@ static struct gdsc ufs_phy_gdsc = { .pwrsts = PWRSTS_OFF_ON, }; -/* -* The Qualcomm DWC3 driver suspend implementation appears to be incomplete -* for sc8280xp so keep the USB power domains always-on for now. -*/ static struct gdsc usb30_mp_gdsc = { .gdscr =0xab004 , .pd = { .name ="usb30_mp_gdsc" , }, - .pwrsts =PWRSTS_OFF_ON , - .flags =ALWAYS_ON , + .pwrsts =PWRSTS_RET_ON , };static struct gdsc usb30_prim_gdsc = {@@ -6861,8 +6856,7 @@ static struct gdsc usb30_prim_gdsc = { .pd = { .name = "usb30_prim_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct gdsc usb30_sec_gdsc = {@@ -6870,8 +6864,7 @@ static struct gdsc usb30_sec_gdsc = { .pd = { .name = "usb30_sec_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, - .flags = ALWAYS_ON, + .pwrsts = PWRSTS_RET_ON, };static struct clk_regmap *gcc_sc8280xp_clocks[] = {