drivers: hid: adjust gyro calibration data
PATCH 1/2 drivers: hid: adjust gyro calibration data
For some reason my DualShock 4 get the calibration data values equal:
gyro_pitch_plus == gyro_pitch_minus
Probably due to some defect in the DS4 hardware, and cause a CPU division exception to crash the linux kernel.
At least with the patch, I can continue play Retroarch without using the Gyroscope :)
--- drivers/hid/hid-sony.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/hid/hid-sony.c +9 -0
@@ -1823,6 +1823,15 @@ static int dualshock4_get_calibration_data(struct sony_sc *sc) acc_z_plus =get_unaligned_le16 (&buf[31 ]); acc_z_minus =get_unaligned_le16 (&buf[33 ]); +if (gyro_pitch_plus == gyro_pitch_minus) + gyro_pitch_minus *=-1 ; + +if (gyro_yaw_plus == gyro_yaw_minus) + gyro_yaw_minus *=-1 ; + +if (gyro_roll_plus == gyro_roll_minus) + gyro_roll_minus *=-1 ; +/* Set gyroscope calibration and normalization parameters. * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. */
Signature · 1 line
2.20.1
Hm, I'm not the biggest fan. Is this an official DS4 or a clone device? It sounds like it is some type of clone (some look real).
Quoted 40 lines · Henry Castro
For some reason my DualShock 4 get the calibration data values equal:
gyro_pitch_plus == gyro_pitch_minusProbably due to some defect in the DS4 hardware, and cause a CPU division exception to crash the linux kernel.
At least with the patch, I can continue play Retroarch without using the Gyroscope :)
Signed-off-by Henry Castro <[email protected]>--- drivers/hid/hid-sony.c | 9 +++++++++ 1 file changed, 9 insertions(+)drivers/hid/hid-sony.c +9
-1@@ -1823,6 +1823,15 @@ static int dualshock4_get_calibration_data(struct sony_sc *sc) acc_z_plus =get_unaligned_le16 (&buf[31 ]); acc_z_minus =get_unaligned_le16 (&buf[33 ]); +if (gyro_pitch_plus == gyro_pitch_minus) + gyro_pitch_minus *=-1 ; + +if (gyro_yaw_plus == gyro_yaw_minus) + gyro_yaw_minus *=-1 ; + +if (gyro_roll_plus == gyro_roll_minus) + gyro_roll_minus *=-1 ; +/* Set gyroscope calibration and normalization parameters. * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. */ --2.20.1
PATCH 1/2 drivers: hid: adjust gyro calibration data
For some reason my DualShock 4 get the calibration data values equal:
gyro_pitch_plus == gyro_pitch_minus
Probably due to some defect in the DS4 hardware, and cause a CPU division exception to crash the linux kernel.
At least with the patch, I can continue play Retroarch without using the Gyroscope :)
---
Quoted 2 lines
Quoted 2 lines
Hm, I'm not the biggest fan. Is this an official DS4 or a clone device? It sounds like it is some type of clone (some look real).
Sorry it happens in my DS4 clone:
I have the log values:
gyro_pitch_plus = 8704giro_pitch_minus = 8704
Then the division exception:
mult_frac(x, y, 0)
drivers/hid/hid-sony.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/hid/hid-sony.c +9 -0
@@ -1823,6 +1823,15 @@ static int dualshock4_get_calibration_data(struct sony_sc *sc) acc_z_plus =get_unaligned_le16 (&buf[31 ]); acc_z_minus =get_unaligned_le16 (&buf[33 ]); +if (gyro_pitch_plus == gyro_pitch_minus) + gyro_pitch_minus *=-1 ; + +if (gyro_yaw_plus == gyro_yaw_minus) + gyro_yaw_minus *=-1 ; + +if (gyro_roll_plus == gyro_roll_minus) + gyro_roll_minus *=-1 ; +/* Set gyroscope calibration and normalization parameters. * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. */
--
2.20.1
Quoted 20 lines · Henry Castro
For some reason my DualShock 4 get the calibration data values equal:
gyro_pitch_plus == gyro_pitch_minusProbably due to some defect in the DS4 hardware, and cause a CPU division exception to crash the linux kernel.
At least with the patch, I can continue play Retroarch without using the Gyroscope :)
Signed-off-by Henry Castro <[email protected]>---
Quoted 2 lines
Quoted 2 lines
Hm, I'm not the biggest fan. Is this an official DS4 or a clone device? It sounds like it is some type of clone (some look real).
Sorry it happens in my DS4 clone:
Quoted 9 lines
I have the log values:
gyro_pitch_plus= 8704giro_pitch_minus= 8704Then the division exception:
mult_frac(x, y, 0)
Are it only these which are equal or are there are other funky ones? Are all constants in general the same? I'm just trying to figure out if some of this device would even need calibration.
Thanks,
Roderick
PATCH 1/2 drivers: hid: adjust gyro calibration data
For some reason my DualShock 4 get the calibration data values equal:
gyro_pitch_plus == gyro_pitch_minus
Probably due to some defect in the DS4 hardware, and cause a CPU division exception to crash the linux kernel.
At least with the patch, I can continue play Retroarch without using the Gyroscope :)
---
Quoted 3 lines
Are it only these which are equal or are there are other funky ones? Are all constants in general the same? I'm just trying to figure out if some of this device would even need calibration.
More data logs:
gyro_pitch_plus=8704 giro_pitch_minus=8704
gyro_yaw_plus=8704 giro_yaw_minus=-8704
gyro_roll_plus=-8704 giro_roll_minus=-8704
Yes, They are constants values :( I
drivers/hid/hid-sony.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/hid/hid-sony.c +9 -0
@@ -1823,6 +1823,15 @@ static int dualshock4_get_calibration_data(struct sony_sc *sc) acc_z_plus =get_unaligned_le16 (&buf[31 ]); acc_z_minus =get_unaligned_le16 (&buf[33 ]); +if (gyro_pitch_plus == gyro_pitch_minus) + gyro_pitch_minus *=-1 ; + +if (gyro_yaw_plus == gyro_yaw_minus) + gyro_yaw_minus *=-1 ; + +if (gyro_roll_plus == gyro_roll_minus) + gyro_roll_minus *=-1 ; +/* Set gyroscope calibration and normalization parameters. * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. */
--
2.20.1