Skip to contentSkip to conversation

pinctrl: mediatek: allow configuring uart rx/tx and rts/cts separately

PATCH In review Frank Wunderlich 3 participants 4 messages Oct 8, 2022 – Oct 17, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pinctrl: mediatek: allow configuring uart rx/tx and rts/cts separately

From: Sam Shih <[email protected]>

Some mt7986 boards use uart rts/cts pins as gpio, This patch allows to change rts/cts to gpio mode, but keep rx/tx as UART function.

---
 drivers/pinctrl/mediatek/pinctrl-mt7986.c | 32 ++++++++++++++++++-----
 1 file changed, 25 insertions(+), 7 deletions(-)
drivers/pinctrl/mediatek/pinctrl-mt7986.c +25 -7
index f26869f1a367..95f32e62e02f 100644
@@ -675,11 +675,17 @@ static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
 static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
 static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
 
-static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
-static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, };
+static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, };
 
-static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
-static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, };
+static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, };
+
+static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, };
+static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, };
+
+static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, };
+static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, };
 
 static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
 static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
@@ -708,6 +714,12 @@ static int mt7986_pcie_reset_funcs[] = { 1, };
 static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
 static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
 
+static int mt7986_uart1_rx_tx_pins[] = { 42, 43, };
+static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_cts_rts_pins[] = { 44, 45, };
+static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, };
+
 static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
 static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
 
@@ -749,6 +761,8 @@ static const struct group_desc mt7986_groups[] = {
 	PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
 	PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
 	PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+	PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx),
+	PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts),
 	PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
 	PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
 	PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
@@ -760,8 +774,10 @@ static const struct group_desc mt7986_groups[] = {
 	PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
 	PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
 	PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
-	PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
-	PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+	PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx),
+	PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts),
+	PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx),
+	PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts),
 	PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
 	PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
 	PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
@@ -800,7 +816,9 @@ static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
 static const char *mt7986_spi_groups[] = {
 	"spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
 static const char *mt7986_uart_groups[] = {
-	"uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+	"uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts",
+	"uart1_2_rx_tx", "uart1_2_cts_rts",
+	"uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts",
 	"uart2_0", "uart2_1", "uart0", "uart1", "uart2",
 };
 static const char *mt7986_wdt_groups[] = { "watchdog", };
Signature · 1 line
2.34.1
#2 lore raw
Quoted 9 lines · Linus Walleij
Quoted 6 lines · Frank Wunderlich

From: Sam Shih <[email protected]>

Some mt7986 boards use uart rts/cts pins as gpio, This patch allows to change rts/cts to gpio mode, but keep rx/tx as UART function.

Quoted 5 lines
Quoted 2 lines

No response from maintainers for a week and patch makes sense so patch applied for next!

Could we add "mt7986" to the patch subject? Otherwise it could be taken to be updating all the SoCs.

ChenYu

Quoted 3 lines

Yours,
Linus Walleij

#3 lore raw
Quoted 10 lines · Chen-Yu Tsai
Quoted 9 lines · Linus Walleij
Quoted 6 lines · Frank Wunderlich

From: Sam Shih <[email protected]>

Some mt7986 boards use uart rts/cts pins as gpio, This patch allows to change rts/cts to gpio mode, but keep rx/tx as UART function.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

No response from maintainers for a week and patch makes sense so patch applied for next!

Could we add "mt7986" to the patch subject? Otherwise it could be taken to be updating all the SoCs.

OK I fixed it!

Yours,
Linus Walleij