media: vimc: Update device configuration in the documentation
PATCH 1/1 media: vimc: Update device configuration in the documentation
Since commit 9b4a9b31b9ae ("media: vimc: Enable set resolution at the scaler src pad") the configuration in the documentation does
not work. Replace it with the configuration
described in commit 9b4a9b31b9ae
Signed-off-by Dafna Hirschfeld <[email protected]>
--- Documentation/admin-guide/media/vimc.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/admin-guide/media/vimc.rst +4 -4
@@ -35,11 +35,11 @@ of commands fits for the default topology: media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' - media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]' - media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]' - v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 + media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]' + media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]' + media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]' + v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 - v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81 Subdevices ----------
Signature · 1 line
2.25.1
Quoted 20 lines · Dafna Hirschfeld
Since commit
9b4a9b31b9ae("media: vimc: Enable set resolution at the scaler src pad") the configuration in the documentation does
not work. Replace it with the configuration
described in commit9b4a9b31b9aeSigned-off-by Dafna Hirschfeld <[email protected]>--- Documentation/admin-guide/media/vimc.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)Documentation/admin-guide/media/vimc.rst +0
-2@@ -35,11 +35,11 @@ of commands fits for the default topology: media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' - media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]' - media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
Documentation/admin-guide/media/vimc.rst of commands fits for the default topology: · line 45
Quoted 10 lines
Documentation/admin-guide/media/vimc.rst +4
-2- v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 + media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]' + media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]' + media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]' + v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 - v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81 Subdevices ----------
Thank you - I will apply this after the merge window closes and send it in for an upcoming 6.1 rc.
thanks,
-- Shuah