ARM: dts: imx7d-sdb: config the max pressure for tsc2046
Subsystems (2)
Sasha Levin
maintainerPATCH 3/7 ARM: dts: imx6q: add missing properties for sram
In reply to Sasha LevinFrom: Alexander Stein <[email protected]>
[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property
--- arch/arm/boot/dts/imx6q.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/imx6q.dtsi +3 -0
@@ -82,6 +82,9 @@ soc { ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; + ranges = <0 0x00900000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; };
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/7 soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF
In reply to Sasha LevinFrom: Jean Delvare <[email protected]>
[ Upstream commit 2778caedb5667239823a29148dfc48b26a8b3c2a ]
With the following configuration options:CONFIG_OF is not setCONFIG_MTK_PMIC_WRAP=yCONFIG_MTK_SCPSYS=y
we get the following build warnings:
CC drivers/soc/mediatek/mtk-pmic-wrap.odrivers/soc/mediatek/mtk-pmic-wrap.c:2138:34: warning: ‘of_pwrap_match_tbl’ defined but not used [-Wunused-const-variable=] drivers/soc/mediatek/mtk-pmic-wrap.c:1953:34: warning: ‘of_slave_match_tbl’ defined but not used [-Wunused-const-variable=]
CC drivers/soc/mediatek/mtk-scpsys.odrivers/soc/mediatek/mtk-scpsys.c:1084:34: warning: ‘of_scpsys_match_tbl’ defined but not used [-Wunused-const-variable=]
Looking at the code, both drivers can only bind to OF-defined device nodes, so these drivers are useless without OF and should therefore depend on it.
Also drop of_match_ptr() from both drivers. We already know what it will resolve to, so we might as well save cpp some work.
Developers or QA teams who wish to test-build the code can still do so by enabling CONFIG_OF, which is available on all architectures and has no dependencies.
--- drivers/soc/mediatek/Kconfig | 2 ++ drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +- drivers/soc/mediatek/mtk-scpsys.c | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-)
drivers/soc/mediatek/Kconfig +2 -0
@@ -14,6 +14,7 @@ config MTK_PMIC_WRAP tristate "MediaTek PMIC Wrapper Support" depends on ARCH_MEDIATEK depends on RESET_CONTROLLER + depends on OF select REGMAP help Say yes here to add support for MediaTek PMIC Wrapper found
@@ -24,6 +25,7 @@ config MTK_SCPSYS bool "MediaTek SCPSYS Support" depends on ARCH_MEDIATEK || COMPILE_TEST default ARCH_MEDIATEK + depends on OF select REGMAP select MTK_INFRACFG select PM_GENERIC_DOMAINS if PM
drivers/soc/mediatek/mtk-pmic-wrap.c +1 -1
@@ -1251,7 +1251,7 @@ static int pwrap_probe(struct platform_device *pdev)static struct platform_driver pwrap_drv = { .driver = { .name ="mt-pmic-pwrap" , - .of_match_table =of_match_ptr (of_pwrap_match_tbl), + .of_match_table = of_pwrap_match_tbl, }, .probe = pwrap_probe, };
drivers/soc/mediatek/mtk-scpsys.c +1 -1
@@ -910,7 +910,7 @@ static struct platform_driver scpsys_drv = { .name = "mtk-scpsys", .suppress_bind_attrs = true, .owner = THIS_MODULE, - .of_match_table = of_match_ptr(of_scpsys_match_tbl), + .of_match_table = of_scpsys_match_tbl, }, };builtin_platform_driver (scpsys_drv);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/7 ARM: dts: imx6sl: add missing properties for sram
In reply to Sasha LevinFrom: Alexander Stein <[email protected]>
[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property
--- arch/arm/boot/dts/imx6sl.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/imx6sl.dtsi +3 -0
@@ -112,6 +112,9 @@ soc { ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6SL_CLK_OCRAM>; };
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/7 ARM: orion: fix include path
In reply to Sasha LevinFrom: Arnd Bergmann <[email protected]>
[ Upstream commit 63872304bdb3decd5454f4dd210c25395278ed13 ]
Now that CONFIG_ARCH_MULTIPLATFORM can be disabled anywhere, there is a build failure for plat-orion:
arch/arm/plat-orion/irq.c:19:10: fatal error: plat/irq.h: No such file or directory
Make the include path unconditional.
--- arch/arm/plat-orion/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/plat-orion/Makefile +1 -1
@@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include +ccflags-y := -I$(srctree)/$(src)/include orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/7 ARM: dts: imx6qp: add missing properties for sram
In reply to Sasha LevinFrom: Alexander Stein <[email protected]>
[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property sram@940000: '#size-cells' is a required property sram@940000: 'ranges' is a required property
--- arch/arm/boot/dts/imx6qp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/boot/dts/imx6qp.dtsi +6 -0
@@ -47,12 +47,18 @@ soc { ocram2: sram@00940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; + ranges = <0 0x00940000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; ocram3: sram@00960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; + ranges = <0 0x00960000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; };
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 1/7 ARM: dts: imx7d-sdb: config the max pressure for tsc2046
From: Haibo Chen <[email protected]>
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]
Use the general touchscreen method to config the max pressure for touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for ABS_PRESSURE, when config the same max and min value, weston will meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen [17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE [17:19:39.183] event1 - ADS7846 Touchscreen: was rejected [17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max" belong to the deprecated properties, so remove them. Also for "ti,x-min", "ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default value in driver, so are redundant, also remove here.
--- arch/arm/boot/dts/imx7d-sdb.dts | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
arch/arm/boot/dts/imx7d-sdb.dts +1 -6
@@ -179,12 +179,7 @@ tsc2046@0 { interrupt-parent = <&gpio2>; interrupts = <29 0>; pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + touchscreen-max-pressure = <255>; wakeup-source; }; };
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/7 ARM: dts: imx6dl: add missing properties for sram
From: Alexander Stein <[email protected]>
[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property
--- arch/arm/boot/dts/imx6dl.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/imx6dl.dtsi +3 -0
@@ -63,6 +63,9 @@ soc { ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; clocks = <&clks IMX6QDL_CLK_OCRAM>; };
Signature · 1 line
2.35.1