media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
Subsystems (6)
Sasha Levin
maintainerPATCH 9/10 staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit b77599043f00fce9253d0f22522c5d5b521555ce ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed from int to netdev_tx_t.
--- drivers/staging/octeon/ethernet-tx.c | 4 ++-- drivers/staging/octeon/ethernet-tx.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/octeon/ethernet-tx.c +2 -2
@@ -137,7 +137,7 @@ static void cvm_oct_free_tx_skbs(struct net_device *dev)* * Returns Always returns NETDEV_TX_OK */ -int cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev) {cvmx_pko_command_word0_t pko_command;union cvmx_buf_ptr hw_buffer;
@@ -523,7 +523,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)* Returns Always returns zero */ -int cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev) {struct octeon_ethernet *priv =netdev_priv (dev);void *packet_buffer;
drivers/staging/octeon/ethernet-tx.h +2 -2
@@ -8,8 +8,8 @@* published by the Free Software Foundation. */ -int cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev); -int cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev);int cvm_oct_transmit_qos (struct net_device *dev,void *work_queue_entry,int do_free,int qos);void cvm_oct_tx_initialize (void );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/10 scsi: 3w-9xxx: Avoid disabling device if failing to enable it
In reply to Sasha LevinFrom: Letu Ren <[email protected]>
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device".
We shouldn't disable a device that failed to be enabled. A simple return is fine.
--- drivers/scsi/3w-9xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/3w-9xxx.c +1 -1
@@ -2016,7 +2016,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) retval =pci_enable_device (pdev);if (retval) {TW_PRINTK (host,TW_DRIVER ,0x34 ,"Failed to enable pci device" ); - goto out_disable_device; +return -ENODEV ; }pci_set_master (pdev);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/10 hid: topre: Add driver fixing report descriptor
In reply to Sasha LevinFrom: Harry Stern <[email protected]>
[ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]
The Topre REALFORCE R2 firmware incorrectly reports that interface descriptor number 1, input report descriptor 2's events are array events rather than variable events. That particular report descriptor is used to report keypresses when there are more than 6 keys held at a time. This bug prevents events from this interface from being registered properly, so only 6 keypresses (from a different interface) can be registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup function.
The original bug report can be found here:
Thanks to Benjamin Tissoires for diagnosing the issue with the report descriptor.
--- drivers/hid/Kconfig | 6 +++++ drivers/hid/Makefile | 1 + drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 59 insertions(+) create mode 100644 drivers/hid/hid-topre.c
drivers/hid/Kconfig +6 -0
@@ -837,6 +837,12 @@ config HID_TOPSEED Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic CLLRCMCE remote control. +config HID_TOPRE + tristate "Topre REALFORCE keyboards" + depends on HID + help + Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards. + config HID_THINGM tristate "ThingM blink(1) USB RGB LED" depends on HID
drivers/hid/Makefile +1 -0
@@ -94,6 +94,7 @@ obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o obj-$(CONFIG_HID_TIVO) += hid-tivo.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o +obj-$(CONFIG_HID_TOPRE) += hid-topre.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o obj-$(CONFIG_HID_LED) += hid-led.o
drivers/hid/hid-ids.h +3 -0
@@ -1001,6 +1001,9 @@#define USB_DEVICE_ID_TIVO_SLIDE 0x1201#define USB_DEVICE_ID_TIVO_SLIDE_PRO 0x1203 +#define USB_VENDOR_ID_TOPRE 0x0853 +#define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108 0x0148 +#define USB_VENDOR_ID_TOPSEED 0x0766#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
drivers/hid/hid-topre.c new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/10 usb: musb: Fix musb_gadget.c rxstate overflow bug
In reply to Sasha LevinFrom: Robin Guo <[email protected]>
[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]
The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
--- drivers/usb/musb/musb_gadget.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/musb/musb_gadget.c +3 -0
@@ -785,6 +785,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)musb_writew (epio,MUSB_RXCSR , csr); buffer_aint_mapped: + fifo_count = min_t(unsigned int, + request->length - request->actual, + (unsigned int )fifo_count);musb_read_fifo (musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/10 usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
In reply to Sasha LevinFrom: Jianglei Nie <[email protected]>
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]
xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.
--- drivers/usb/host/xhci-mem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-mem.c +6 -1
@@ -703,7 +703,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, num_stream_ctxs, &stream_info->ctx_array_dma, mem_flags);if (!stream_info->stream_ctx_array) - goto cleanup_ctx; + goto cleanup_ring_array;memset (stream_info->stream_ctx_array,0 ,sizeof (struct xhci_stream_ctx )*num_stream_ctxs);
@@ -764,6 +764,11 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, }xhci_free_command (xhci, stream_info->free_streams_command); cleanup_ctx: +xhci_free_stream_ctx (xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); +cleanup_ring_array:kfree (stream_info->stream_rings); cleanup_info:kfree (stream_info);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/10 HID: roccat: Fix use-after-free in roccat_read()
In reply to Sasha LevinFrom: Hyunwoo Kim <[email protected]>
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]
roccat_report_event() is responsible for registering roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...The registered report is stored in the struct roccat_device member "struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value, kfree() the saved report from cbuf[0] and allocates a new reprot. Since there is no lock when this kfree() is performed, kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...The roccat_read() function receives the device->cbuf report and delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of the Nth report->value is in progress, the pointer that copy_to_user() is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions, this is not a security vulnerability, but because it is used for requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or There is a possibility to use it by giving.
--- drivers/hid/hid-roccat.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/hid/hid-roccat.c +4 -0
@@ -260,6 +260,8 @@ int roccat_report_event(int minor, u8 const *data)if (!new_value)return -ENOMEM ; +mutex_lock (&device->cbuf_lock); + report = &device->cbuf[device->cbuf_end];/* passing NULL is safe */
@@ -279,6 +281,8 @@ int roccat_report_event(int minor, u8 const *data) reader->cbuf_start = (reader->cbuf_start +1 ) %ROCCAT_CBUF_SIZE ; } +mutex_unlock (&device->cbuf_lock); +wake_up_interruptible (&device->wait);return 0 ; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 1/10 media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
From: Zheyu Ma <[email protected]>
[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
--- drivers/media/pci/cx88/cx88-vbi.c | 9 +++--- drivers/media/pci/cx88/cx88-video.c | 43 +++++++++++++++-------------- 2 files changed, 26 insertions(+), 26 deletions(-)
drivers/media/pci/cx88/cx88-vbi.c +4 -5
@@ -140,11 +140,10 @@ static int buffer_prepare(struct vb2_buffer *vb)return -EINVAL ;vb2_set_plane_payload (vb,0 , size); -cx88_risc_buffer (dev->pci, &buf->risc, sgt->sgl, -0 ,VBI_LINE_LENGTH * lines, -VBI_LINE_LENGTH ,0 , - lines); -return 0 ; +return cx88_risc_buffer (dev->pci, &buf->risc, sgt->sgl, +0 ,VBI_LINE_LENGTH * lines, +VBI_LINE_LENGTH ,0 , + lines); }static void buffer_finish (struct vb2_buffer *vb)
drivers/media/pci/cx88/cx88-video.c +22 -21
70 lines not on this page · raw message
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/10 HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()
From: Jianglei Nie <[email protected]>
[ Upstream commit b28dbcb379e6a7f80262c2732a57681b1ee548ca ]
ssip_pn_open() claims the HSI client's port with hsi_claim_port(). When hsi_register_port_event() gets some error and returns a negetive value, the HSI client's port should be released with hsi_release_port().
Fix it by calling hsi_release_port() when hsi_register_port_event() fails.
--- drivers/hsi/clients/ssi_protocol.c | 1 + 1 file changed, 1 insertion(+)
drivers/hsi/clients/ssi_protocol.c +1 -0
@@ -932,6 +932,7 @@ static int ssip_pn_open(struct net_device *dev)if (err <0 ) {dev_err (&cl->device,"Register HSI port event failed (%d)\n" , err); +hsi_release_port (cl);return err; }dev_dbg (&cl->device,"Configuring SSI port\n" );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 8/10 Revert "usb: storage: Add quirk for Samsung Fit flash"
In reply to Sasha LevinFrom: sunghwan jung <[email protected]>
[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]
This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.
# hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.
--- drivers/usb/storage/unusual_devs.h | 6 ------ 1 file changed, 6 deletions(-)
drivers/usb/storage/unusual_devs.h +0 -6
@@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV (0x090c ,0x1000 ,0x1100 ,0x1100 , -"Samsung" , -"Flash Drive FIT" , -USB_SC_DEVICE ,USB_PR_DEVICE ,NULL , -US_FL_MAX_SECTORS_64 ), -/* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya",
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 10/10 usb: idmouse: fix an uninit-value in idmouse_open
In reply to Sasha LevinFrom: Dongliang Mu <[email protected]>
[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]
In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data.
Note that this is found by KMSAN, so only kernel compilation is tested.
--- drivers/usb/misc/idmouse.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/misc/idmouse.c +4 -4
@@ -183,10 +183,6 @@ static int idmouse_create_image(struct usb_idmouse *dev) bytes_read += bulk_read; } -/* reset the device */ -reset: -ftip_command (dev,FTIP_RELEASE ,0 ,0 ); -/* check for valid image */ /* right border should be black (0x00) */ for (bytes_read =sizeof (HEADER )-1 +WIDTH -1 ; bytes_read <IMGSIZE ; bytes_read +=WIDTH )
@@ -198,6 +194,10 @@ static int idmouse_create_image(struct usb_idmouse *dev)if (dev->bulk_in_buffer[bytes_read] !=0xFF )return -EAGAIN ; +/* reset the device */ +reset: +ftip_command (dev,FTIP_RELEASE ,0 ,0 ); +/* should be IMGSIZE == 65040 */ dev_dbg (&dev->interface->dev,"read %d bytes fingerprint data\n" , bytes_read);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerRe: [PATCH AUTOSEL 4.9 09/10] staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow
In reply to Sasha LevinQuoted 9 lines · Sasha Levin
From: Nathan Huckleberry <[email protected]>
[ Upstream commit
b77599043f00fce9253d0f22522c5d5b521555ce]The
ndo_start_xmitfield innet_device_opsis expected to be of typenetdev_tx_t(*ndo_start_xmit)(structsk_buff*skb, structnet_device*dev).The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
kCFI showed up in 6.1, so this is not needed in any stable branches, please drop it from all.
thanks,
greg k-h
Re: [PATCH AUTOSEL 4.9 08/10] Revert "usb: storage: Add quirk for Samsung Fit flash"
In reply to Sasha LevinHi!
Quoted 17 lines
From: sunghwan jung <[email protected]>
[ Upstream commit
ad5dbfc123e6ffbbde194e2a4603323e09f741ee]This reverts commit
86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.
# hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec# hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
Quoted 8 lines
The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.
Re-introducing timeouts for users in middle of stable series... may not be nice. Is there better fix in a follow up to this that was not backported?
I see that buffered reads got faster, but that may not really mean real performance gains...
Best regards,
Pavel
Quoted 20 lines
drivers/usb/storage/unusual_devs.h | 6 ------ 1 file changed, 6 deletions(-)drivers/usb/storage/unusual_devs.h +0
-6@@ -1294,12 +1294,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV (0x090c ,0x1000 ,0x1100 ,0x1100 , -"Samsung" , -"Flash Drive FIT" , -USB_SC_DEVICE ,USB_PR_DEVICE ,NULL , -US_FL_MAX_SECTORS_64 ), -/* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya",
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Re: [PATCH AUTOSEL 4.9 03/10] hid: topre: Add driver fixing report descriptor
In reply to Sasha LevinHi!
Quoted 12 lines
From: Harry Stern <[email protected]>
[ Upstream commit
a109d5c45b3d6728b9430716b915afbe16eef27c]The Topre REALFORCE R2 firmware incorrectly reports that interface descriptor number 1, input report descriptor 2's events are array events rather than variable events. That particular report descriptor is used to report keypresses when there are more than 6 keys held at a time. This bug prevents events from this interface from being registered properly, so only 6 keypresses (from a different interface) can be registered at once, rather than full n-key rollover.
Quoted 8 lines
This commit fixes the bug by setting the correct value in a
report_fixupfunction.The original bug report can be found here:
Thanks to Benjamin Tissoires for diagnosing the issue with the report descriptor.
Come on, whole new driver to work around hw problem that is not really serious. Plus this won't really do anything unless people enable it in config.
This should not be in stable.
Best regards,
Pavel
Quoted 9 lines
Signed-off-by Harry Stern <[email protected]>Signed-off-by Benjamin Tissoires <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- drivers/hid/Kconfig | 6 +++++ drivers/hid/Makefile | 1 + drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Greg Kroah-Hartman
maintainerRe: [PATCH AUTOSEL 4.9 08/10] Revert "usb: storage: Add quirk for Samsung Fit flash"
In reply to Pavel MachekQuoted 23 lines · Pavel Machek
Hi!
Quoted 21 lines
From: sunghwan jung <[email protected]>
[ Upstream commit
ad5dbfc123e6ffbbde194e2a4603323e09f741ee]This reverts commit
86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.
# hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec# hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/secThe commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.
Quoted 8 lines
Quoted 4 lines
We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.
Re-introducing timeouts for users in middle of stable series... may not be nice. Is there better fix in a follow up to this that was not backported?
No.
thanks,
greg k-h