Skip to contentSkip to conversation

of/fdt: Don't calculate initrd size from DT if start > end

PATCH New Sasha Levin 1 participant 8 messages Oct 18, 2022

Subsystems (4)
lore
Share & tools
lore
author maintainer
#2 lore raw

PATCH 3/8 gfs2: Check sb_bsize_shift after reading superblock

In reply to Sasha Levin

From: Andrew Price <[email protected]>

[ Upstream commit 670f8ce56dd0632dc29a0322e188cc73ce3c6b92 ]

Fuzzers like to scribble over sb_bsize_shift but in reality it's very unlikely that this field would be corrupted on its own. Nevertheless it should be checked to avoid the possibility of messy mount errors due to bad calculations. It's always a fixed value based on the block size so we can just check that it's the expected value.

Tested with:

mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb mount /dev/vdb /mnt/test && umount /mnt/test
done

Before this patch we get a withdraw after

[   76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[   76.413681]   bh = 19 (type: exp=5, found=4)
[   76.413681]   function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492

and with UBSAN configured we also get complaints like

[   76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[   76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'

After the patch, these complaints don't appear, mount fails immediately and we get an explanation in dmesg.

Reported-by syzbot+dcf33a7aae997956fe06 at syzkaller.appspotmail.com
---
 fs/gfs2/ops_fstype.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
fs/gfs2/ops_fstype.c +4 -1
index 0b5c37ceb3ed..2bc1226a0bd9 100644
@@ -172,7 +172,10 @@ static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
 		pr_warn("Invalid superblock size\n");
 		return -EINVAL;
 	}
-
+	if (sb->sb_bsize_shift != ffs(sb->sb_bsize) - 1) {
+		pr_warn("Invalid block size shift\n");
+		return -EINVAL;
+	}
 	return 0;
 }
 
Signature · 1 line
2.35.1
author maintainer
#7 lore raw

PATCH 8/8 virtio_pci: don't try to use intxif pin is zero

In reply to Sasha Levin

From: Angus Chen <[email protected]>

[ Upstream commit 71491c54eafa318fdd24a1f26a1c82b28e1ac21d ]

The background is that we use dpu in cloud computing,the arch is x86,80 cores. We will have a lots of virtio devices,like 512 or more. When we probe about 200 virtio_blk devices,it will fail and the stack is printed as follows:

[25338.485128] virtio-pci 0000:b3:00.0: virtio_pci: leaving for legacy driver
[25338.496174] genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)
[25338.503822] CPU: 20 PID: 5431 Comm: kworker/20:0 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-305.30.1.el8.x86_64
[25338.516403] Hardware name: Inspur NF5280M5/YZMB-00882-10E, BIOS 4.1.21 08/25/2021
[25338.523881] Workqueue: events work_for_cpu_fn
[25338.528235] Call Trace:
[25338.530687]  dump_stack+0x5c/0x80
[25338.534000]  __setup_irq.cold.53+0x7c/0xd3
[25338.538098]  request_threaded_irq+0xf5/0x160
[25338.542371]  vp_find_vqs+0xc7/0x190
[25338.545866]  init_vq+0x17c/0x2e0 [virtio_blk]
[25338.550223]  ? ncpus_cmp_func+0x10/0x10
[25338.554061]  virtblk_probe+0xe6/0x8a0 [virtio_blk]
[25338.558846]  virtio_dev_probe+0x158/0x1f0
[25338.562861]  really_probe+0x255/0x4a0
[25338.566524]  ? __driver_attach_async_helper+0x90/0x90
[25338.571567]  driver_probe_device+0x49/0xc0
[25338.575660]  bus_for_each_drv+0x79/0xc0
[25338.579499]  __device_attach+0xdc/0x160
[25338.583337]  bus_probe_device+0x9d/0xb0
[25338.587167]  device_add+0x418/0x780
[25338.590654]  register_virtio_device+0x9e/0xe0
[25338.595011]  virtio_pci_probe+0xb3/0x140
[25338.598941]  local_pci_probe+0x41/0x90
[25338.602689]  work_for_cpu_fn+0x16/0x20
[25338.606443]  process_one_work+0x1a7/0x360
[25338.610456]  ? create_worker+0x1a0/0x1a0
[25338.614381]  worker_thread+0x1cf/0x390
[25338.618132]  ? create_worker+0x1a0/0x1a0
[25338.622051]  kthread+0x116/0x130
[25338.625283]  ? kthread_flush_work_fn+0x10/0x10
[25338.629731]  ret_from_fork+0x1f/0x40
[25338.633395] virtio_blk: probe of virtio418 failed with error -16

The log :
"genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)" was printed because of the irq 0 is used by timer exclusive,and when vp_find_vqs call vp_find_vqs_msix and returns false twice (for whatever reason), then it will call vp_find_vqs_intx as a fallback. Because vp_dev->pci_dev->irq is zero, we request irq 0 with flag IRQF_SHARED, and get a backtrace like above.

According to PCI spec about "Interrupt Pin" Register (Offset 3Dh):
"The Interrupt Pin register is a read-only register that identifies the
legacy interrupt Message(s) the Function uses. Valid values are 01h, 02h, 03h, and 04h that map to legacy interrupt Messages for INTA, INTB, INTC, and INTD respectively. A value of 00h indicates that the Function uses no legacy interrupt Message(s)."

So if vp_dev->pci_dev->pin is zero, we should not request legacy interrupt.

Message-Id: <[email protected]>

---
 drivers/virtio/virtio_pci_common.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/virtio/virtio_pci_common.c +3 -0
index 924554b7010d..9f2f215a69b6 100644
@@ -405,6 +405,9 @@ int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
 	err = vp_find_vqs_msix(vdev, nvqs, vqs, callbacks, names, false, ctx, desc);
 	if (!err)
 		return 0;
+	/* Is there an interrupt pin? If not give up. */
+	if (!(to_vp_device(vdev)->pci_dev->pin))
+		return err;
 	/* Finally fall back to regular interrupts. */
 	return vp_find_vqs_intx(vdev, nvqs, vqs, callbacks, names, ctx);
 }
Signature · 6 lines
2.35.1

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
author maintainer
#1 lore raw

PATCH 2/8 objtool,x86: Teach decode about LOOP* instructions

In reply to Sasha Levin

From: Peter Zijlstra <[email protected]>

[ Upstream commit 7a7621dfa417aa3715d2a3bd1bdd6cf5018274d0 ]

When 'discussing' control flow Masami mentioned the LOOP* instructions and I realized objtool doesn't decode them properly.

As it turns out, these instructions are somewhat inefficient and as such unlikely to be emitted by the compiler (a few vmlinux.o checks can't find a single one) so this isn't critical, but still, best to decode them properly.

---
 tools/objtool/arch/x86/decode.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/objtool/arch/x86/decode.c +6 -0
index 540a209b78ab..faaf2820e932 100644
@@ -440,6 +440,12 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
 		*type = INSN_CONTEXT_SWITCH;
 		break;
 
+	case 0xe0: /* loopne */
+	case 0xe1: /* loope */
+	case 0xe2: /* loop */
+		*type = INSN_JUMP_CONDITIONAL;
+		break;
+
 	case 0xe8:
 		*type = INSN_CALL;
 		break;
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/8 9p: trans_fd/p9_conn_cancel: drop client lock earlier

In reply to Sasha Levin

From: Dominique Martinet <[email protected]>

[ Upstream commit 52f1c45dde9136f964d63a77d19826c8a74e2c7f ]

syzbot reported a double-lock here and we no longer need this lock after requests have been moved off to local list:
just drop the lock earlier.

---
 net/9p/trans_fd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/9p/trans_fd.c +2 -1
index 1b56b22c5c5d..acb5b5f15a33 100644
@@ -219,6 +219,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err)
 		list_move(&req->req_list, &cancel_list);
 	}
 
+	spin_unlock(&m->client->lock);
+
 	list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
 		p9_debug(P9_DEBUG_ERROR, "call back req %p\n", req);
 		list_del(&req->req_list);
@@ -226,7 +228,6 @@ static void p9_conn_cancel(struct p9_conn *m, int err)
 			req->t_err = err;
 		p9_client_cb(m->client, req, REQ_STATUS_ERROR);
 	}
-	spin_unlock(&m->client->lock);
 }
 
 static int
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/8 m68knommu: fix non-mmu classic 68000 legacy timer tick selection

In reply to Sasha Levin

From: Greg Ungerer <[email protected]>

[ Upstream commit 18011e50c497f04a57a8e00122906f04922b30b4 ]

The family of classic 68000 parts supported when in non-mmu mode all currently use the legacy timer support. Move the selection of that config option, LEGACY_TIMER_TICK, into the core CPU configuration.

This fixes compilation if no specific CPU variant is selected, since the LEGACY_TIMER_TICK option was only selected in the specific CPU variant configurations.

---
 arch/m68k/Kconfig.cpu | 1 +
 1 file changed, 1 insertion(+)
arch/m68k/Kconfig.cpu +1 -0
index 6f13c53c8dc7..3f5b92f567dc 100644
@@ -43,6 +43,7 @@ config M68000
 	select GENERIC_CSUM
 	select CPU_NO_EFFICIENT_FFS
 	select HAVE_ARCH_HASH
+	select LEGACY_TIMER_TICK
 	help
 	  The Freescale (was Motorola) 68000 CPU is the first generation of
 	  the well known M68K family of processors. The CPU core as well as
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/8 m68knommu: fix non-specific 68328 choice interrupt build failure

In reply to Sasha Levin

From: Greg Ungerer <[email protected]>

[ Upstream commit 750321ace9107e103f254bf46900629ff347eb7b ]

Compiling for a classic m68k non-MMU target with no specific CPU selected fails with the following error:

arch/m68k/68000/ints.c: In function 'process_int':

Quoted 1 line
Quoted 1 line

arch/m68k/68000/ints.c:82:30: error: 'ISR' undeclared (first use in this function)

      82 |         unsigned long pend = ISR;
         |                              ^~~

This interrupt handling code is specific to the 68328 family of 68000 parts. There is a couple of variants (68EZ328, 68VZ328) and the common ancestor of them the strait 68328.

The code here includes a specific header for each variant type. But if none is selected then nothing is included to supply the appropriate register and bit flags defines.

Rearrange the includes so that at least one type is always included. At the very least the 68328 base type should be the fallback, so make that true.

---
 arch/m68k/68000/ints.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/m68k/68000/ints.c +3 -3
index cda49b12d7be..f9a5ec781408 100644
@@ -18,12 +18,12 @@
 #include <asm/io.h>
 #include <asm/machdep.h>
 
-#if defined(CONFIG_M68328)
-#include <asm/MC68328.h>
-#elif defined(CONFIG_M68EZ328)
+#if defined(CONFIG_M68EZ328)
 #include <asm/MC68EZ328.h>
 #elif defined(CONFIG_M68VZ328)
 #include <asm/MC68VZ328.h>
+#else
+#include <asm/MC68328.h>
 #endif
 
 /* assembler routines */
Signature · 1 line
2.35.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/8 of/fdt: Don't calculate initrd size from DT if start > end

From: Marek Bykowski <[email protected]>

[ Upstream commit d5e3050c0feb8bf7b9a75482fafcc31b90257926 ]

If the properties 'linux,initrd-start' and 'linux,initrd-end' of the chosen node populated from the bootloader, eg. U-Boot, are so that start > end, then the phys_initrd_size calculated from end - start is negative that subsequently gets converted to a high positive value for being unsigned long long. Then, the memory region with the (invalid) size is added to the bootmem and attempted being paged in paging_init() that results in the kernel fault.

For example, on the FVP ARM64 system I'm running, the U-Boot populates the 'linux,initrd-start' with 8800_0000 and 'linux,initrd-end' with 0. The phys_initrd_size calculated is then ffff_ffff_7800_0000 (= 0 - 8800_0000 = -8800_0000 + ULLONG_MAX + 1). paging_init() then attempts to map the address 8800_0000 + ffff_ffff_7800_0000 and oops'es as below.

It should be stressed, it is generally a fault of the bootloader's with the kernel relying on it, however we should not allow the bootloader's misconfiguration to lead to the kernel oops. Not only the kernel should be bullet proof against it but also finding the root cause of the paging fault spanning over the bootloader, DT, and kernel may happen is not so easy.

  Unable to handle kernel paging request at virtual address fffffffefe43c000
  Mem abort info:
    ESR = 0x96000007
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000007
    CM = 0, WnR = 0
  swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
  [fffffffefe43c000] pgd=0000000080de9003, pud=0000000080de9003
  Unable to handle kernel paging request at virtual address ffffff8000de9f90
  Mem abort info:
    ESR = 0x96000005
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000005
    CM = 0, WnR = 0
  swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
  [ffffff8000de9f90] pgd=0000000000000000, pud=0000000000000000
  Internal error: Oops: 96000005 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.51-yocto-standard #1
  Hardware name: FVP Base (DT)
  pstate: 60000085 (nZCv daIf -PAN -UAO)
  pc : show_pte+0x12c/0x1b4
  lr : show_pte+0x100/0x1b4
  sp : ffffffc010ce3b30
  x29: ffffffc010ce3b30 x28: ffffffc010ceed80
  x27: fffffffefe43c000 x26: fffffffefe43a028
  x25: 0000000080bf0000 x24: 0000000000000025
  x23: ffffffc010b8d000 x22: ffffffc010e3d000
  x23: ffffffc010b8d000 x22: ffffffc010e3d000
  x21: 0000000080de9000 x20: ffffff7f80000f90
  x19: fffffffefe43c000 x18: 0000000000000030
  x17: 0000000000001400 x16: 0000000000001c00
  x15: ffffffc010cef1b8 x14: ffffffffffffffff
  x13: ffffffc010df1f40 x12: ffffffc010df1b70
  x11: ffffffc010ce3b30 x10: ffffffc010ce3b30
  x9 : 00000000ffffffc8 x8 : 0000000000000000
  x7 : 000000000000000f x6 : ffffffc010df16e8
  x5 : 0000000000000000 x4 : 0000000000000000
  x3 : 00000000ffffffff x2 : 0000000000000000
  x1 : 0000008080000000 x0 : ffffffc010af1d68
  Call trace:
   show_pte+0x12c/0x1b4
   die_kernel_fault+0x54/0x78
   __do_kernel_fault+0x11c/0x128
   do_translation_fault+0x58/0xac
   do_mem_abort+0x50/0xb0
   el1_da+0x1c/0x90
   __create_pgd_mapping+0x348/0x598
   paging_init+0x3f0/0x70d0
   setup_arch+0x2c0/0x5d4
   start_kernel+0x94/0x49c
  Code: 92748eb5 900052a0 9135a000 cb010294 (f8756a96) 
---
 drivers/of/fdt.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/of/fdt.c +2 -0
index cc9b8c699da4..253680c84c8c 100644
@@ -957,6 +957,8 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
 	if (!prop)
 		return;
 	end = of_read_number(prop, len/4);
+	if (start > end)
+		return;
 
 	__early_init_dt_declare_initrd(start, end);
 
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/8 9p/trans_fd: always use O_NONBLOCK read/write

From: Tetsuo Handa <[email protected]>

[ Upstream commit ef575281b21e9a34dfae544a187c6aac2ae424a9 ]

syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or kernel_write() from p9_fd_write() from p9_write_work() requests.

Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open() does not set O_NONBLOCK flag, but pipe blocks unless signal is pending, p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when the file descriptor refers to a pipe. In other words, pipe file descriptor needs to be handled as if socket file descriptor.

We somehow need to interrupt kernel_read()/kernel_write() on pipes.

A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace- supplied file descriptors (which might break userspace programs), and O_NONBLOCK flag could be changed by userspace. It would be possible to set O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still remains small race window for clearing O_NONBLOCK flag.

If we don't want to manipulate O_NONBLOCK flag, we might be able to surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING) and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are processed by kernel threads which process global system_wq workqueue, signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be needed if we count on signals for making kernel_read()/kernel_write() non-blocking.

---
 net/9p/trans_fd.c | 3 +++
 1 file changed, 3 insertions(+)
net/9p/trans_fd.c +3 -0
index acb5b5f15a33..9b23bf0e278c 100644
@@ -834,11 +834,14 @@ static int p9_fd_open(struct p9_client *client, int rfd, int wfd)
 		goto out_free_ts;
 	if (!(ts->rd->f_mode & FMODE_READ))
 		goto out_put_rd;
+	/* prevent workers from hanging on IO when fd is a pipe */
+	ts->rd->f_flags |= O_NONBLOCK;
 	ts->wr = fget(wfd);
 	if (!ts->wr)
 		goto out_put_rd;
 	if (!(ts->wr->f_mode & FMODE_WRITE))
 		goto out_put_wr;
+	ts->wr->f_flags |= O_NONBLOCK;
 
 	client->trans = ts;
 	client->status = Connected;
Signature · 1 line
2.35.1