m68k: write bootinfo as rom section and re-randomize on reboot
PATCH v5 1/1 m68k: write bootinfo as rom section and re-randomize on reboot
Rather than poking directly into RAM, add the bootinfo block as a proper ROM, so that it's restored when rebooting the system. This way, if the guest corrupts any of the bootinfo items, but then tries to reboot, it'll still be restored back to normal as expected.
Then, since the RNG seed needs to be fresh on each boot, regenerate the RNG seed in the ROM when reseting the CPU.
Cc Geert Uytterhoeven <[email protected]>
Cc Laurent Vivier <[email protected]>
Signed-off-by Jason A. Donenfeld <[email protected]>
---
Changes v4->v5:
- Use QEMU_ALIGN_PTR_UP.
I'm also okay with v4, if you prefer that instead. I did this just because Richard mentioned it. But I don't really care, and most other QEMU code doesn't bother either.
hw/m68k/bootinfo.h | 48 +++++++++++++++---------------- hw/m68k/q800.c | 71 +++++++++++++++++++++++++++++++++------------- hw/m68k/virt.c | 51 +++++++++++++++++++++++---------- 3 files changed, 111 insertions(+), 59 deletions(-)
hw/m68k/bootinfo.h +24 -24
@@ -12,66 +12,66 @@#ifndef HW_M68K_BOOTINFO_H #define HW_M68K_BOOTINFO_H -#define BOOTINFO0 (as, base, id) \ +#define BOOTINFO0 (base, id) \ do { \ - stw_phys(as, base, id); \ + stw_p(base, id); \ base += 2; \ - stw_phys(as, base, sizeof(struct bi_record)); \ + stw_p(base, sizeof(struct bi_record)); \ base += 2; \ } while (0) -#define BOOTINFO1 (as, base, id, value) \ +#define BOOTINFO1 (base, id, value) \ do { \ - stw_phys(as, base, id); \ + stw_p(base, id); \ base += 2; \ - stw_phys(as, base, sizeof(struct bi_record) + 4); \ + stw_p(base, sizeof(struct bi_record) + 4); \ base += 2; \ - stl_phys(as, base, value); \ + stl_p(base, value); \ base += 4; \ } while (0) -#define BOOTINFO2 (as, base, id, value1, value2) \ +#define BOOTINFO2 (base, id, value1, value2) \ do { \ - stw_phys(as, base, id); \ + stw_p(base, id); \ base += 2; \ - stw_phys(as, base, sizeof(struct bi_record) + 8); \ + stw_p(base, sizeof(struct bi_record) + 8); \ base += 2; \ - stl_phys(as, base, value1); \ + stl_p(base, value1); \ base += 4; \ - stl_phys(as, base, value2); \ + stl_p(base, value2); \ base += 4; \ } while (0) -#define BOOTINFOSTR (as, base, id, string) \ +#define BOOTINFOSTR (base, id, string) \ do { \ int i; \ - stw_phys(as, base, id); \ + stw_p(base, id); \ base += 2; \ - stw_phys(as, base, \ + stw_p(base, \ (sizeof(struct bi_record) + strlen(string) + \ 1 /* null termination */ + 3 /* padding */) & ~3); \ base +=2 ; \for (i =0 ; string[i]; i++) { \ -stb_phys (as, base++, string[i]); \ +stb_p (base++, string[i]); \ } \ -stb_phys (as, base++,0 ); \ - base = (base +3 ) & ~3 ; \ +stb_p (base++,0 ); \ + base =QEMU_ALIGN_PTR_UP (base,4 ); \ } while (0) -#define BOOTINFODATA (as, base, id, data, len) \ +#define BOOTINFODATA (base, id, data, len) \ do { \ int i; \ - stw_phys(as, base, id); \ + stw_p(base, id); \ base += 2; \ - stw_phys(as, base, \ + stw_p(base, \ (sizeof(struct bi_record) + len + \ 2 /* length field */ + 3 /* padding */) & ~3); \ base +=2 ; \ -stw_phys (as, base, len); \ +stw_p (base, len); \ base +=2 ; \for (i =0 ; i < len; ++i) { \ -stb_phys (as, base++, data[i]); \ +stb_p (base++, data[i]); \ } \ - base = (base +3 ) & ~3 ; \ + base =QEMU_ALIGN_PTR_UP (base,4 ); \ } while (0)#endif
hw/m68k/q800.c +51 -20
132 lines not on this page · raw message
hw/m68k/virt.c +36 -15
102 lines not on this page · raw message
Signature · 1 line
2.38.1