Skip to contentSkip to conversation

(v)pci: fixes related to memory decoding handling

PATCH Superseded Roger Pau Monne 4 participants 21 messages Oct 25, 2022 – Oct 31, 2022

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover (v)pci: fixes related to memory decoding handling

Hello,

This patch series attempts to fix the regressions caused by 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned') and the last patch relaxes the check done when attempting to write to BARs with memory decoding enabled.

I consider all of them bug fixes, albeit the last patch is not fixing a regression (since vPCI code has always behaved this way).

Thanks, Roger.

Roger Pau Monne (5):
vpci: don't assume that vpci per-device data exists unconditionally vpci/msix: remove from table list on detach
vpci: introduce a local vpci_bar variable to modify_decoding()
pci: do not disable memory decoding for devices
vpci: refuse BAR writes only if the BAR is mapped

 xen/drivers/passthrough/pci.c | 69 -----------------------------------
 xen/drivers/vpci/header.c     | 52 ++++++++++++++++++--------
 xen/drivers/vpci/vpci.c       | 14 ++++---
 xen/include/xen/vpci.h        |  6 +++
 4 files changed, 52 insertions(+), 89 deletions(-)
Signature · 1 line
2.37.3
#1 lore raw

PATCH v2 1/5 vpci: don't assume that vpci per-device data exists unconditionally

It's possible for a device to be assigned to a domain but have no vpci structure if vpci_process_pending() failed and called vpci_remove_device() as a result. The unconditional accesses done by vpci_{read,write}() and vpci_remove_device() to pdev->vpci would then trigger a NULL pointer dereference.

Add checks for pdev->vpci presence in the affected functions.

Fixes 9c244fdef7 ('vpci: add header handlers')
---
 xen/drivers/vpci/vpci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
xen/drivers/vpci/vpci.c +3 -3
index 3467c0de86..647f7af679 100644
@@ -37,7 +37,7 @@ extern vpci_register_init_t *const __end_vpci_array[];
 
 void vpci_remove_device(struct pci_dev *pdev)
 {
-    if ( !has_vpci(pdev->domain) )
+    if ( !has_vpci(pdev->domain) || !pdev->vpci )
         return;
 
     spin_lock(&pdev->vpci->lock);
@@ -326,7 +326,7 @@ uint32_t vpci_read(pci_sbdf_t sbdf, unsigned int reg, unsigned int size)
 
     /* Find the PCI dev matching the address. */
     pdev = pci_get_pdev(d, sbdf);
-    if ( !pdev )
+    if ( !pdev || !pdev->vpci )
         return vpci_read_hw(sbdf, reg, size);
 
     spin_lock(&pdev->vpci->lock);
@@ -436,7 +436,7 @@ void vpci_write(pci_sbdf_t sbdf, unsigned int reg, unsigned int size,
      * Passthrough everything that's not trapped.
      */
     pdev = pci_get_pdev(d, sbdf);
-    if ( !pdev )
+    if ( !pdev || !pdev->vpci )
     {
         vpci_write_hw(sbdf, reg, size, data);
         return;
Signature · 1 line
2.37.3
#2 lore raw

Re: [PATCH for-4.17 v2 1/5] vpci: don't assume that vpci per-device data exists unconditionally

xen/drivers/vpci/vpci.c extern vpci_register_init_t *const __end_vpci_array[]; · line 41

Quoted 9 lines · Roger Pau Monne
xen/drivers/vpci/vpci.c +1 -1
@@ -37,7 +37,7 @@ extern vpci_register_init_t *const __end_vpci_array[];
 
 void vpci_remove_device(struct pci_dev *pdev)
 {
-    if ( !has_vpci(pdev->domain) )
+    if ( !has_vpci(pdev->domain) || !pdev->vpci )
         return;

Btw (noticing while backporting) - is the left side of the || still needed then?

Jan

#3 lore raw

PATCH v2 2/5 vpci/msix: remove from table list on detach

In reply to Roger Pau Monne

Teardown of MSIX vPCI related data doesn't currently remove the MSIX device data from the list of MSIX tables handled by the domain, leading to a use-after-free of the data in the msix structure.

Remove the structure from the list before freeing in order to solve it.

Fixes d6281be9d0 ('vpci/msix: add MSI-X handlers')
---
 xen/drivers/vpci/vpci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
xen/drivers/vpci/vpci.c +6 -2
index 647f7af679..98198dc2c9 100644
@@ -51,8 +51,12 @@ void vpci_remove_device(struct pci_dev *pdev)
         xfree(r);
     }
     spin_unlock(&pdev->vpci->lock);
-    if ( pdev->vpci->msix && pdev->vpci->msix->pba )
-        iounmap(pdev->vpci->msix->pba);
+    if ( pdev->vpci->msix )
+    {
+        list_del(&pdev->vpci->msix->next);
+        if ( pdev->vpci->msix->pba )
+            iounmap(pdev->vpci->msix->pba);
+    }
     xfree(pdev->vpci->msix);
     xfree(pdev->vpci->msi);
     xfree(pdev->vpci);
Signature · 1 line
2.37.3
Reviewed-by on v2 2/5
#4 lore raw

Re: [PATCH for-4.17 v2 2/5] vpci/msix: remove from table list on detach

Quoted 10 lines · Roger Pau Monne

Teardown of MSIX vPCI related data doesn't currently remove the MSIX device data from the list of MSIX tables handled by the domain, leading to a use-after-free of the data in the msix structure.

Remove the structure from the list before freeing in order to solve it.

Fixes d6281be9d0 ('vpci/msix: add MSI-X handlers')
#5 lore raw

PATCH v2 3/5 vpci: introduce a local vpci_bar variable to modify_decoding()

In reply to Roger Pau Monne

This is done to shorten line length in the function in preparation for adding further usages of the vpci_bar data structure.

No functional change.

---
 xen/drivers/vpci/header.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
xen/drivers/vpci/header.c +8 -6
index a1c928a0d2..eb9219a49a 100644
@@ -103,24 +103,26 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
 
     for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
     {
-        if ( !MAPPABLE_BAR(&header->bars[i]) )
+        struct vpci_bar *bar = &header->bars[i];
+
+        if ( !MAPPABLE_BAR(bar) )
             continue;
 
-        if ( rom_only && header->bars[i].type == VPCI_BAR_ROM )
+        if ( rom_only && bar->type == VPCI_BAR_ROM )
         {
             unsigned int rom_pos = (i == PCI_HEADER_NORMAL_NR_BARS)
                                    ? PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
-            uint32_t val = header->bars[i].addr |
+            uint32_t val = bar->addr |
                            (map ? PCI_ROM_ADDRESS_ENABLE : 0);
 
-            header->bars[i].enabled = header->rom_enabled = map;
+            bar->enabled = header->rom_enabled = map;
             pci_conf_write32(pdev->sbdf, rom_pos, val);
             return;
         }
 
         if ( !rom_only &&
-             (header->bars[i].type != VPCI_BAR_ROM || header->rom_enabled) )
-            header->bars[i].enabled = map;
+             (bar->type != VPCI_BAR_ROM || header->rom_enabled) )
+            bar->enabled = map;
     }
 
     if ( !rom_only )
Signature · 1 line
2.37.3
#6 lore raw

PATCH v2 4/5 pci: do not disable memory decoding for devices

In reply to Roger Pau Monne

Commit 75cc460a1b added checks to ensure the position of the BARs from PCI devices don't overlap with regions defined on the memory map. When there's a collision memory decoding is left disabled for the device, assuming that dom0 will reposition the BAR if necessary and enable memory decoding.

While this would be the case for devices being used by dom0, devices being used by the firmware itself that have no driver would usually be left with memory decoding disabled by dom0 if that's the state dom0 found them in, and thus firmware trying to make use of them will not function correctly.

The initial intent of 75cc460a1b was to prevent vPCI from creating MMIO mappings on the dom0 p2m over regions that would otherwise already have mappings established. It's my view now that we likely went too far with 75cc460a1b, and Xen disabling memory decoding of devices (as buggy as they might be) is harmful, and reduces the set of hardware on which Xen works.

This commits reverts most of 75cc460a1b, and instead adds checks to vPCI in order to prevent misplaced BARs from being added to the hardware domain p2m. Signaling on whether BARs are mapped is tracked in the vpci structure, so that misplaced BARs are not mapped, and thus Xen won't attempt to unmap them when memory decoding is disabled.

This restores the behavior of Xen for PV dom0 to the state it was previous to 75cc460a1b, while also introducing a more contained fix for the vPCI BAR mapping issues.

Fixes 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned')

---
AT Citrix we have a system with a device with the following BARs:

BAR [0xfe010, 0xfe010] -> in a EfiMemoryMappedIO region BAR [0, 0x1fff] -> not positioned, outside host bridge window

And memory decoding enabled by the firmware. With the current code (or any of the previous fix proposals), Xen would still disable memory decoding for the device, and the system will freeze when attempting to set EFI vars.

I'm afraid the best solution to avoid regressions caused by 75cc460a1b is the proposal here.

---
 xen/drivers/passthrough/pci.c | 69 -----------------------------------
 xen/drivers/vpci/header.c     | 22 ++++++++++-
 2 files changed, 20 insertions(+), 71 deletions(-)
xen/drivers/passthrough/pci.c +0 -69
index 149f68bb6e..b42acb8d7c 100644
@@ -233,9 +233,6 @@ static void check_pdev(const struct pci_dev *pdev)
      PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT | \
      PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY)
     u16 val;
-    unsigned int nbars = 0, rom_pos = 0, i;
-    static const char warn[] = XENLOG_WARNING
-        "%pp disabled: %sBAR [%#lx, %#lx] overlaps with memory map\n";
 
     if ( command_mask )
     {
@@ -254,8 +251,6 @@ static void check_pdev(const struct pci_dev *pdev)
     switch ( pci_conf_read8(pdev->sbdf, PCI_HEADER_TYPE) & 0x7f )
     {
     case PCI_HEADER_TYPE_BRIDGE:
-        nbars = PCI_HEADER_BRIDGE_NR_BARS;
-        rom_pos = PCI_ROM_ADDRESS1;
         if ( !bridge_ctl_mask )
             break;
         val = pci_conf_read16(pdev->sbdf, PCI_BRIDGE_CONTROL);
@@ -272,75 +267,11 @@ static void check_pdev(const struct pci_dev *pdev)
         }
         break;
 
-    case PCI_HEADER_TYPE_NORMAL:
-        nbars = PCI_HEADER_NORMAL_NR_BARS;
-        rom_pos = PCI_ROM_ADDRESS;
-        break;
-
     case PCI_HEADER_TYPE_CARDBUS:
         /* TODO */
         break;
     }
 #undef PCI_STATUS_CHECK
-
-    /* Check if BARs overlap with other memory regions. */
-    val = pci_conf_read16(pdev->sbdf, PCI_COMMAND);
-    if ( !(val & PCI_COMMAND_MEMORY) || pdev->ignore_bars )
-        return;
-
-    pci_conf_write16(pdev->sbdf, PCI_COMMAND, val & ~PCI_COMMAND_MEMORY);
-    for ( i = 0; i < nbars; )
-    {
-        uint64_t addr, size;
-        unsigned int reg = PCI_BASE_ADDRESS_0 + i * 4;
-        int rc = 1;
-
-        if ( (pci_conf_read32(pdev->sbdf, reg) & PCI_BASE_ADDRESS_SPACE) !=
-             PCI_BASE_ADDRESS_SPACE_MEMORY )
-            goto next;
-
-        rc = pci_size_mem_bar(pdev->sbdf, reg, &addr, &size,
-                              (i == nbars - 1) ? PCI_BAR_LAST : 0);
-        if ( rc < 0 )
-            /* Unable to size, better leave memory decoding disabled. */
-            return;
-        if ( size && !pci_check_bar(pdev, maddr_to_mfn(addr),
-                                    maddr_to_mfn(addr + size - 1)) )
-        {
-            /*
-             * Return without enabling memory decoding if BAR position is not
-             * in IO suitable memory. Let the hardware domain re-position the
-             * BAR.
-             */
-            printk(warn,
-                   &pdev->sbdf, "", PFN_DOWN(addr), PFN_DOWN(addr + size - 1));
-            return;
-        }
-
- next:
-        ASSERT(rc > 0);
-        i += rc;
-    }
-
-    if ( rom_pos &&
-         (pci_conf_read32(pdev->sbdf, rom_pos) & PCI_ROM_ADDRESS_ENABLE) )
-    {
-        uint64_t addr, size;
-        int rc = pci_size_mem_bar(pdev->sbdf, rom_pos, &addr, &size,
-                                  PCI_BAR_ROM);
-
-        if ( rc < 0 )
-            return;
-        if ( size && !pci_check_bar(pdev, maddr_to_mfn(addr),
-                                    maddr_to_mfn(addr + size - 1)) )
-        {
-            printk(warn, &pdev->sbdf, "ROM ", PFN_DOWN(addr),
-                   PFN_DOWN(addr + size - 1));
-            return;
-        }
-    }
-
-    pci_conf_write16(pdev->sbdf, PCI_COMMAND, val);
 }
 
 static void apply_quirks(struct pci_dev *pdev)
xen/drivers/vpci/header.c +20 -2
index eb9219a49a..4d7f8f4a30 100644
@@ -121,7 +121,9 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
         }
 
         if ( !rom_only &&
-             (bar->type != VPCI_BAR_ROM || header->rom_enabled) )
+             (bar->type != VPCI_BAR_ROM || header->rom_enabled) &&
+             pci_check_bar(pdev, _mfn(PFN_DOWN(bar->addr)),
+                           _mfn(PFN_DOWN(bar->addr + bar->size - 1))) )
             bar->enabled = map;
     }
 
@@ -234,9 +236,25 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 
         if ( !MAPPABLE_BAR(bar) ||
              (rom_only ? bar->type != VPCI_BAR_ROM
-                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) )
+                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) ||
+             /* Skip BARs already in the requested state. */
+             bar->enabled == !!(cmd & PCI_COMMAND_MEMORY) )
             continue;
 
+        /*
+         * Only do BAR position checks for the hardware domain, for guests it's
+         * assumed that the hardware domain has changed the position of any
+         * problematic BARs.
+         */
+        if ( is_hardware_domain(pdev->domain) &&
+             !pci_check_bar(pdev, _mfn(start), _mfn(end)) )
+        {
+            printk(XENLOG_G_WARNING
+                   "%pp: not mapping BAR [%lx, %lx] invalid position\n",
+                   &pdev->sbdf, start, end);
+            continue;
+        }
+
         rc = rangeset_add_range(mem, start, end);
         if ( rc )
         {
Signature · 1 line
2.37.3
#7 lore raw

Re: [PATCH for-4.17 v2 4/5] pci: do not disable memory decoding for devices

Quoted 29 lines · Roger Pau Monne

Commit 75cc460a1b added checks to ensure the position of the BARs from PCI devices don't overlap with regions defined on the memory map. When there's a collision memory decoding is left disabled for the device, assuming that dom0 will reposition the BAR if necessary and enable memory decoding.

While this would be the case for devices being used by dom0, devices being used by the firmware itself that have no driver would usually be left with memory decoding disabled by dom0 if that's the state dom0 found them in, and thus firmware trying to make use of them will not function correctly.

The initial intent of 75cc460a1b was to prevent vPCI from creating MMIO mappings on the dom0 p2m over regions that would otherwise already have mappings established. It's my view now that we likely went too far with 75cc460a1b, and Xen disabling memory decoding of devices (as buggy as they might be) is harmful, and reduces the set of hardware on which Xen works.

This commits reverts most of 75cc460a1b, and instead adds checks to vPCI in order to prevent misplaced BARs from being added to the hardware domain p2m. Signaling on whether BARs are mapped is tracked in the vpci structure, so that misplaced BARs are not mapped, and thus Xen won't attempt to unmap them when memory decoding is disabled.

This restores the behavior of Xen for PV dom0 to the state it was previous to 75cc460a1b, while also introducing a more contained fix for the vPCI BAR mapping issues.

Quoted 7 lines
Fixes 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned')

---
AT Citrix we have a system with a device with the following BARs:

BAR [0xfe010, 0xfe010] -> in a EfiMemoryMappedIO region BAR [0, 0x1fff] -> not positioned, outside host bridge window

This needs a bit more explanation (even if only in the email thread). The first item here is permitted under the UEFI spec, and exists on production systems.  We've got several examples.

The second has only been seen on an SDP, and is hopefully a firmware bug that doesn't get out to production, but we should boot nevertheless.

~Andrew

#8 lore raw

Re: [PATCH for-4.17 v2 4/5] pci: do not disable memory decoding for devices

Quoted 35 lines · Andrew Cooper
Quoted 34 lines · Roger Pau Monne

Commit 75cc460a1b added checks to ensure the position of the BARs from PCI devices don't overlap with regions defined on the memory map. When there's a collision memory decoding is left disabled for the device, assuming that dom0 will reposition the BAR if necessary and enable memory decoding.

While this would be the case for devices being used by dom0, devices being used by the firmware itself that have no driver would usually be left with memory decoding disabled by dom0 if that's the state dom0 found them in, and thus firmware trying to make use of them will not function correctly.

The initial intent of 75cc460a1b was to prevent vPCI from creating MMIO mappings on the dom0 p2m over regions that would otherwise already have mappings established. It's my view now that we likely went too far with 75cc460a1b, and Xen disabling memory decoding of devices (as buggy as they might be) is harmful, and reduces the set of hardware on which Xen works.

This commits reverts most of 75cc460a1b, and instead adds checks to vPCI in order to prevent misplaced BARs from being added to the hardware domain p2m. Signaling on whether BARs are mapped is tracked in the vpci structure, so that misplaced BARs are not mapped, and thus Xen won't attempt to unmap them when memory decoding is disabled.

This restores the behavior of Xen for PV dom0 to the state it was previous to 75cc460a1b, while also introducing a more contained fix for the vPCI BAR mapping issues.

Fixes 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned')

---
AT Citrix we have a system with a device with the following BARs:

Quoted 6 lines
Quoted 2 lines

BAR [0xfe010, 0xfe010] -> in a EfiMemoryMappedIO region BAR [0, 0x1fff] -> not positioned, outside host bridge window

This needs a bit more explanation (even if only in the email thread). The first item here is permitted under the UEFI spec, and exists on production systems.  We've got several examples.

Afaict it is at best unclear whether this is really permitted. Generally BARs are not supposed to be covered by memory map entries, be it E820 or EFI.

Jan

Quoted 4 lines

The second has only been seen on an SDP, and is hopefully a firmware bug that doesn't get out to production, but we should boot nevertheless.

~Andrew

#9 lore raw

Re: [PATCH for-4.17 v2 4/5] pci: do not disable memory decoding for devices

In reply to Andrew Cooper
Quoted 38 lines · Andrew Cooper
Quoted 29 lines · Roger Pau Monne

Commit 75cc460a1b added checks to ensure the position of the BARs from PCI devices don't overlap with regions defined on the memory map. When there's a collision memory decoding is left disabled for the device, assuming that dom0 will reposition the BAR if necessary and enable memory decoding.

While this would be the case for devices being used by dom0, devices being used by the firmware itself that have no driver would usually be left with memory decoding disabled by dom0 if that's the state dom0 found them in, and thus firmware trying to make use of them will not function correctly.

The initial intent of 75cc460a1b was to prevent vPCI from creating MMIO mappings on the dom0 p2m over regions that would otherwise already have mappings established. It's my view now that we likely went too far with 75cc460a1b, and Xen disabling memory decoding of devices (as buggy as they might be) is harmful, and reduces the set of hardware on which Xen works.

This commits reverts most of 75cc460a1b, and instead adds checks to vPCI in order to prevent misplaced BARs from being added to the hardware domain p2m. Signaling on whether BARs are mapped is tracked in the vpci structure, so that misplaced BARs are not mapped, and thus Xen won't attempt to unmap them when memory decoding is disabled.

This restores the behavior of Xen for PV dom0 to the state it was previous to 75cc460a1b, while also introducing a more contained fix for the vPCI BAR mapping issues.

Quoted 7 lines
Fixes 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned')

---
AT Citrix we have a system with a device with the following BARs:

BAR [0xfe010, 0xfe010] -> in a EfiMemoryMappedIO region BAR [0, 0x1fff] -> not positioned, outside host bridge window

Quoted 6 lines

This needs a bit more explanation (even if only in the email thread). The first item here is permitted under the UEFI spec, and exists on production systems.  We've got several examples.

The second has only been seen on an SDP, and is hopefully a firmware bug that doesn't get out to production, but we should boot nevertheless.

I already saw the second on production systems, as is what triggered the change in 75cc460a1b. I might not have seen both in conjunction on the same device on a production system.

Thanks, Roger.

#10 lore raw

Re: [PATCH for-4.17 v2 4/5] pci: do not disable memory decoding for devices

In reply to Roger Pau Monne

xen/drivers/vpci/header.c static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd, · line 128

Quoted 12 lines · Roger Pau Monne
xen/drivers/vpci/header.c +3 -1
@@ -121,7 +121,9 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
         }
 
         if ( !rom_only &&
-             (bar->type != VPCI_BAR_ROM || header->rom_enabled) )
+             (bar->type != VPCI_BAR_ROM || header->rom_enabled) &&
+             pci_check_bar(pdev, _mfn(PFN_DOWN(bar->addr)),
+                           _mfn(PFN_DOWN(bar->addr + bar->size - 1))) )
             bar->enabled = map;
     }

What about the ROM handling immediately above from here?

Quoted 13 lines
xen/drivers/vpci/header.c +6 -1
@@ -234,9 +236,25 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 
         if ( !MAPPABLE_BAR(bar) ||
              (rom_only ? bar->type != VPCI_BAR_ROM
-                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) )
+                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) ||
+             /* Skip BARs already in the requested state. */
+             bar->enabled == !!(cmd & PCI_COMMAND_MEMORY) )
             continue;
 
+        /*
+         * Only do BAR position checks for the hardware domain, for guests it's
+         * assumed that the hardware domain has changed the position of any

xen/drivers/vpci/header.c static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only) · line 256

Quoted 10 lines
xen/drivers/vpci/header.c +10 -0
+         * problematic BARs.
+         */
+        if ( is_hardware_domain(pdev->domain) &&
+             !pci_check_bar(pdev, _mfn(start), _mfn(end)) )
+        {
+            printk(XENLOG_G_WARNING
+                   "%pp: not mapping BAR [%lx, %lx] invalid position\n",
+                   &pdev->sbdf, start, end);
+            continue;
+        }

I'm not convinced of it being appropriate to skip the check for DomU. I'd rather consider this a "fixme", as (perhaps somewhere else) we should return an error if a misconfigured device was passed. We cannot blindly leave the security of the system to tool stack + Dom0 kernel imo.

And then, if this is Dom0-only, I think it wants to be XENLOG_WARNING, i.e. without the G infix.

Jan

#11 lore raw

Re: [PATCH for-4.17 v2 4/5] pci: do not disable memory decoding for devices

Quoted 6 lines · Jan Beulich
Quoted 5 lines · Roger Pau Monne
xen/drivers/vpci/header.c +0 -0
@@ -121,7 +121,9 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
         }
 
Quoted 9 lines

xen/drivers/vpci/header.c static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd, · line 128

Quoted 7 lines
xen/drivers/vpci/header.c +3 -1
         if ( !rom_only &&
-             (bar->type != VPCI_BAR_ROM || header->rom_enabled) )
+             (bar->type != VPCI_BAR_ROM || header->rom_enabled) &&
+             pci_check_bar(pdev, _mfn(PFN_DOWN(bar->addr)),
+                           _mfn(PFN_DOWN(bar->addr + bar->size - 1))) )
             bar->enabled = map;
     }

What about the ROM handling immediately above from here?

Needs fixing indeed. I had plans to short circuit the ROM only mapping path earlier if the BAR wasn't correctly positioned, but decided it was too complicated and then forgot to adjust the conditional.

Quoted 30 lines
Quoted 13 lines
xen/drivers/vpci/header.c +6 -1
@@ -234,9 +236,25 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 
         if ( !MAPPABLE_BAR(bar) ||
              (rom_only ? bar->type != VPCI_BAR_ROM
-                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) )
+                       : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) ||
+             /* Skip BARs already in the requested state. */
+             bar->enabled == !!(cmd & PCI_COMMAND_MEMORY) )
             continue;
 
+        /*
+         * Only do BAR position checks for the hardware domain, for guests it's
+         * assumed that the hardware domain has changed the position of any

xen/drivers/vpci/header.c static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only) · line 256

Quoted 10 lines
xen/drivers/vpci/header.c +10 -0
+         * problematic BARs.
+         */
+        if ( is_hardware_domain(pdev->domain) &&
+             !pci_check_bar(pdev, _mfn(start), _mfn(end)) )
+        {
+            printk(XENLOG_G_WARNING
+                   "%pp: not mapping BAR [%lx, %lx] invalid position\n",
+                   &pdev->sbdf, start, end);
+            continue;
+        }

I'm not convinced of it being appropriate to skip the check for DomU. I'd rather consider this a "fixme", as (perhaps somewhere else) we should return an error if a misconfigured device was passed. We cannot blindly leave the security of the system to tool stack + Dom0 kernel imo.

Quoted 2 lines

And then, if this is Dom0-only, I think it wants to be XENLOG_WARNING, i.e. without the G infix.

OK, I don't mind removing the is_hardware_domain() condition, it's still not clear how we want to handle all this when domU support is added.

Thanks, Roger.

#12 lore raw

PATCH v2 5/5 vpci: refuse BAR writes only if the BAR is mapped

In reply to Roger Pau Monne

Writes to the BARs are ignored if memory decoding is enabled for the device, and the same happen with ROM BARs if the write is an attempt to change the position of the BAR without disabling it first.

The reason of ignoring such writes is a limitation in Xen, as it would need to unmap the BAR, change the address, and remap the BAR at the new position, which the current logic doesn't support.

Some devices however seem to (wrongly) have the memory decoding bit hardcoded to enabled, and attempts to disable it don't get reflected on the command register.

This causes issues for well behaved guests that disable memory decoding and then try to size the BARs, as vPCI will think memory decoding is still enabled and ignore the write.

Since vPCI doesn't explicitly care about whether the memory decoding bit is disabled as long as the BAR is not mapped in the guest p2m use the information in the vpci_bar to check whether the BAR is mapped, and refuse writes only based on that information. This workarounds the issue, and allows guests to size and reposition the BARs properly.

---
Changes since v1:
- Cache setting of memory decoding in command register.
- Reword some log messages.

---
 xen/drivers/vpci/header.c | 18 ++++++++++--------
 xen/include/xen/vpci.h    |  6 ++++++
 2 files changed, 16 insertions(+), 8 deletions(-)
xen/drivers/vpci/header.c +10 -8
index 4d7f8f4a30..ecd95059b2 100644
@@ -128,7 +128,10 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
     }
 
     if ( !rom_only )
+    {
         pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd);
+        header->bars_mapped = map;
+    }
     else
         ASSERT_UNREACHABLE();
 }
@@ -355,13 +358,13 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 static void cf_check cmd_write(
     const struct pci_dev *pdev, unsigned int reg, uint32_t cmd, void *data)
 {
-    uint16_t current_cmd = pci_conf_read16(pdev->sbdf, reg);
+    struct vpci_header *header = data;
 
     /*
      * Let Dom0 play with all the bits directly except for the memory
      * decoding one.
      */
-    if ( (cmd ^ current_cmd) & PCI_COMMAND_MEMORY )
+    if ( header->bars_mapped != !!(cmd & PCI_COMMAND_MEMORY) )
         /*
          * Ignore the error. No memory has been added or removed from the p2m
          * (because the actual p2m changes are deferred in defer_map) and the
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )
     {
         /* If the value written is the current one avoid printing a warning. */
         if ( val != (uint32_t)(bar->addr >> (hi ? 32 : 0)) )
             gprintk(XENLOG_WARNING,
-                    "%pp: ignored BAR %zu write with memory decoding enabled\n",
+                    "%pp: ignored BAR %zu write while mapped\n",
                     &pdev->sbdf, bar - pdev->vpci->header.bars + hi);
         return;
     }
@@ -422,13 +425,12 @@ static void cf_check rom_write(
 {
     struct vpci_header *header = &pdev->vpci->header;
     struct vpci_bar *rom = data;
-    uint16_t cmd = pci_conf_read16(pdev->sbdf, PCI_COMMAND);
     bool new_enabled = val & PCI_ROM_ADDRESS_ENABLE;
 
-    if ( (cmd & PCI_COMMAND_MEMORY) && header->rom_enabled && new_enabled )
+    if ( header->bars_mapped && header->rom_enabled && new_enabled )
     {
         gprintk(XENLOG_WARNING,
-                "%pp: ignored ROM BAR write with memory decoding enabled\n",
+                "%pp: ignored ROM BAR write while mapped\n",
                 &pdev->sbdf);
         return;
     }
@@ -440,7 +442,7 @@ static void cf_check rom_write(
          */
         rom->addr = val & PCI_ROM_ADDRESS_MASK;
 
-    if ( !(cmd & PCI_COMMAND_MEMORY) || header->rom_enabled == new_enabled )
+    if ( !header->bars_mapped || header->rom_enabled == new_enabled )
     {
         /* Just update the ROM BAR field. */
         header->rom_enabled = new_enabled;
xen/include/xen/vpci.h +6 -0
index 67c9a0c631..d8acfeba8a 100644
@@ -88,6 +88,12 @@ struct vpci {
          * is mapped into guest p2m) if there's a ROM BAR on the device.
          */
         bool rom_enabled      : 1;
+        /*
+         * Cache whether memory decoding is enabled from our PoV.
+         * Some devices have a sticky memory decoding so that can't be relied
+         * upon to know whether BARs are mapped into the guest p2m.
+         */
+        bool bars_mapped      : 1;
         /* FIXME: currently there's no support for SR-IOV. */
     } header;
 
Signature · 1 line
2.37.3
#13 lore raw

Re: [PATCH for-4.17 v2 5/5] vpci: refuse BAR writes only if the BAR is mapped

Quoted 8 lines · Roger Pau Monne

Writes to the BARs are ignored if memory decoding is enabled for the device, and the same happen with ROM BARs if the write is an attempt to change the position of the BAR without disabling it first.

The reason of ignoring such writes is a limitation in Xen, as it would need to unmap the BAR, change the address, and remap the BAR at the new position, which the current logic doesn't support.

Quoted 7 lines

Some devices however seem to (wrongly) have the memory decoding bit hardcoded to enabled, and attempts to disable it don't get reflected on the command register.

This causes issues for well behaved guests that disable memory decoding and then try to size the BARs, as vPCI will think memory decoding is still enabled and ignore the write.

Just to avoid misunderstandings: "guests" here includes Dom0? In such cases we typically prefer to say "domains". This then also affects the next (final) paragraph.

Quoted 30 lines
xen/drivers/vpci/header.c +5 -2
@@ -128,7 +128,10 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
     }
 
     if ( !rom_only )
+    {
         pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd);
+        header->bars_mapped = map;
+    }
     else
         ASSERT_UNREACHABLE();
 }
@@ -355,13 +358,13 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 static void cf_check cmd_write(
     const struct pci_dev *pdev, unsigned int reg, uint32_t cmd, void *data)
 {
-    uint16_t current_cmd = pci_conf_read16(pdev->sbdf, reg);
+    struct vpci_header *header = data;
 
     /*
      * Let Dom0 play with all the bits directly except for the memory
      * decoding one.
      */
-    if ( (cmd ^ current_cmd) & PCI_COMMAND_MEMORY )
+    if ( header->bars_mapped != !!(cmd & PCI_COMMAND_MEMORY) )
         /*
          * Ignore the error. No memory has been added or removed from the p2m
          * (because the actual p2m changes are deferred in defer_map) and the

xen/drivers/vpci/header.c static void cf_check bar_write( · line 394

Quoted 5 lines
xen/drivers/vpci/header.c +1 -1
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )

In 3 of the 4 cases you use header->bars_mapped as replacement. Since it's not clear to me why you don't here, could you explain this to me? (I'm therefore undecided whether this is merely a cosmetic [consistency] issue.)

Quoted 34 lines
xen/drivers/vpci/header.c +4 -5
     {
         /* If the value written is the current one avoid printing a warning. */
         if ( val != (uint32_t)(bar->addr >> (hi ? 32 : 0)) )
             gprintk(XENLOG_WARNING,
-                    "%pp: ignored BAR %zu write with memory decoding enabled\n",
+                    "%pp: ignored BAR %zu write while mapped\n",
                     &pdev->sbdf, bar - pdev->vpci->header.bars + hi);
         return;
     }
@@ -422,13 +425,12 @@ static void cf_check rom_write(
 {
     struct vpci_header *header = &pdev->vpci->header;
     struct vpci_bar *rom = data;
-    uint16_t cmd = pci_conf_read16(pdev->sbdf, PCI_COMMAND);
     bool new_enabled = val & PCI_ROM_ADDRESS_ENABLE;
 
-    if ( (cmd & PCI_COMMAND_MEMORY) && header->rom_enabled && new_enabled )
+    if ( header->bars_mapped && header->rom_enabled && new_enabled )
     {
         gprintk(XENLOG_WARNING,
-                "%pp: ignored ROM BAR write with memory decoding enabled\n",
+                "%pp: ignored ROM BAR write while mapped\n",
                 &pdev->sbdf);
         return;
     }
@@ -440,7 +442,7 @@ static void cf_check rom_write(
          */
         rom->addr = val & PCI_ROM_ADDRESS_MASK;
 
-    if ( !(cmd & PCI_COMMAND_MEMORY) || header->rom_enabled == new_enabled )
+    if ( !header->bars_mapped || header->rom_enabled == new_enabled )
     {
         /* Just update the ROM BAR field. */
         header->rom_enabled = new_enabled;
#14 lore raw

Re: [PATCH for-4.17 v2 5/5] vpci: refuse BAR writes only if the BAR is mapped

Quoted 13 lines · Jan Beulich
Quoted 12 lines · Roger Pau Monne

Writes to the BARs are ignored if memory decoding is enabled for the device, and the same happen with ROM BARs if the write is an attempt to change the position of the BAR without disabling it first.

The reason of ignoring such writes is a limitation in Xen, as it would need to unmap the BAR, change the address, and remap the BAR at the new position, which the current logic doesn't support.

Some devices however seem to (wrongly) have the memory decoding bit hardcoded to enabled, and attempts to disable it don't get reflected on the command register.

Quoted 7 lines
Quoted 3 lines

This causes issues for well behaved guests that disable memory decoding and then try to size the BARs, as vPCI will think memory decoding is still enabled and ignore the write.

Just to avoid misunderstandings: "guests" here includes Dom0? In such cases we typically prefer to say "domains". This then also affects the next (final) paragraph.

Right, will adjust.

Quoted 33 lines
Quoted 33 lines
xen/drivers/vpci/header.c +5 -2
@@ -128,7 +128,10 @@ static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
     }
 
     if ( !rom_only )
+    {
         pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd);
+        header->bars_mapped = map;
+    }
     else
         ASSERT_UNREACHABLE();
 }
@@ -355,13 +358,13 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 static void cf_check cmd_write(
     const struct pci_dev *pdev, unsigned int reg, uint32_t cmd, void *data)
 {
-    uint16_t current_cmd = pci_conf_read16(pdev->sbdf, reg);
+    struct vpci_header *header = data;
 
     /*
      * Let Dom0 play with all the bits directly except for the memory
      * decoding one.
      */
-    if ( (cmd ^ current_cmd) & PCI_COMMAND_MEMORY )
+    if ( header->bars_mapped != !!(cmd & PCI_COMMAND_MEMORY) )
         /*
          * Ignore the error. No memory has been added or removed from the p2m
          * (because the actual p2m changes are deferred in defer_map) and the
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
Quoted 6 lines

xen/drivers/vpci/header.c static void cf_check bar_write( · line 394

Quoted 2 lines
xen/drivers/vpci/header.c +1 -1
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )

In 3 of the 4 cases you use header->bars_mapped as replacement. Since it's not clear to me why you don't here, could you explain this to me? (I'm therefore undecided whether this is merely a cosmetic [consistency] issue.)

No, it's intended to use bar->enabled here rather than header->bars_mapped.

It's possible to have header->bars_mapped == true, but bar->enabled == false if memory decoding is enabled, but this BAR specifically has failed to be mapped in the guest p2m, which means dom0 is safe to move it for what Xen cares (ie: it won't mess with p2m mappings because there are none for the BAR).

We could be more strict and use header->bars_mapped, but I don't think there's a need for it.

What about adding a comment with:

/*
* Xen only cares whether the BAR is mapped into the p2m, so allow BAR
* writes as long as the BAR is not mapped into the p2m.
*/

Otherwise I can switch to using header->bars_mapped if you think that's clearer.

Thanks, Roger.

#15 lore raw

Re: [PATCH for-4.17 v2 5/5] vpci: refuse BAR writes only if the BAR is mapped

Quoted 27 lines · Roger Pau Monné
Quoted 11 lines · Jan Beulich

xen/drivers/vpci/header.c static void cf_check bar_write( · line 394

Quoted 6 lines · Roger Pau Monne
xen/drivers/vpci/header.c +1 -1
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )

In 3 of the 4 cases you use header->bars_mapped as replacement. Since it's not clear to me why you don't here, could you explain this to me? (I'm therefore undecided whether this is merely a cosmetic [consistency] issue.)

No, it's intended to use bar->enabled here rather than header->bars_mapped.

It's possible to have header->bars_mapped == true, but bar->enabled == false if memory decoding is enabled, but this BAR specifically has failed to be mapped in the guest p2m, which means dom0 is safe to move it for what Xen cares (ie: it won't mess with p2m mappings because there are none for the BAR).

We could be more strict and use header->bars_mapped, but I don't think there's a need for it.

What about adding a comment with:

Quoted 7 lines

/*
* Xen only cares whether the BAR is mapped into the p2m, so allow BAR
* writes as long as the BAR is not mapped into the p2m.
*/

Otherwise I can switch to using header->bars_mapped if you think that's clearer.

It's not so much a matter of being clearer, but a matter of consistency:
Why does the same consideration not apply in rom_write()? In fact both uses there are (already before the change) combined with further conditions (checking header->rom_enabled and new_enabled). If the inconsistency is on purpose (and perhaps necessary), I'd like to first understand why that is before deciding what to do about it. A comment like you suggest it _may_ be the route to go.

Jan

#16 lore raw

Re: [PATCH for-4.17 v2 5/5] vpci: refuse BAR writes only if the BAR is mapped

Quoted 36 lines · Jan Beulich
Quoted 27 lines · Roger Pau Monné
Quoted 11 lines · Jan Beulich

xen/drivers/vpci/header.c static void cf_check bar_write( · line 394

Quoted 6 lines · Roger Pau Monne
xen/drivers/vpci/header.c +1 -1
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )

In 3 of the 4 cases you use header->bars_mapped as replacement. Since it's not clear to me why you don't here, could you explain this to me? (I'm therefore undecided whether this is merely a cosmetic [consistency] issue.)

No, it's intended to use bar->enabled here rather than header->bars_mapped.

It's possible to have header->bars_mapped == true, but bar->enabled == false if memory decoding is enabled, but this BAR specifically has failed to be mapped in the guest p2m, which means dom0 is safe to move it for what Xen cares (ie: it won't mess with p2m mappings because there are none for the BAR).

We could be more strict and use header->bars_mapped, but I don't think there's a need for it.

What about adding a comment with:

Quoted 7 lines

/*
* Xen only cares whether the BAR is mapped into the p2m, so allow BAR
* writes as long as the BAR is not mapped into the p2m.
*/

Otherwise I can switch to using header->bars_mapped if you think that's clearer.

Quoted 7 lines

It's not so much a matter of being clearer, but a matter of consistency:
Why does the same consideration not apply in rom_write()? In fact both uses there are (already before the change) combined with further conditions (checking header->rom_enabled and new_enabled). If the inconsistency is on purpose (and perhaps necessary), I'd like to first understand why that is before deciding what to do about it. A comment like you suggest it _may_ be the route to go.

ROM register is more complex to handle, because the same register that's used to store the address also contains the bit that can trigger whether it's mapped into the guest p2m or not (PCI_ROM_ADDRESS_ENABLE). So ROM BAR writes with the ROM BAR mapped and the PCI_ROM_ADDRESS_ENABLE bit also set in the to be written value will be rejected, because we only allow to first disable the ROM and then change the address (which is likely to not play well with OSes, but so far I haven't been able to test ROM BAR register usage on PVH).

I do think for consistency it would be better to use rom->enabled in the first conditional of rom_write() check, so it would be:

    if ( rom->enabled && new_enabled )
    {
        gprintk(XENLOG_WARNING,
                "%pp: ignored ROM BAR write while mapped\n",
                &pdev->sbdf);
        return;
    }

So that we also allow changing the address of ROM BARs even with memory decoding and PCI_ROM_ADDRESS_ENABLE as long as the ROM BAR is not mapped in the p2m.

Would you be fine with the comment in the previous email added and rom_write() adjusted as suggested above?

Thanks, Roger.

#17 lore raw

Re: [PATCH for-4.17 v2 5/5] vpci: refuse BAR writes only if the BAR is mapped

Quoted 65 lines · Roger Pau Monné
Quoted 36 lines · Jan Beulich
Quoted 27 lines · Roger Pau Monné
Quoted 11 lines · Jan Beulich

xen/drivers/vpci/header.c static void cf_check bar_write( · line 394

Quoted 6 lines · Roger Pau Monne
xen/drivers/vpci/header.c +1 -1
@@ -388,12 +391,12 @@ static void cf_check bar_write(
     else
         val &= PCI_BASE_ADDRESS_MEM_MASK;
 
-    if ( pci_conf_read16(pdev->sbdf, PCI_COMMAND) & PCI_COMMAND_MEMORY )
+    if ( bar->enabled )

In 3 of the 4 cases you use header->bars_mapped as replacement. Since it's not clear to me why you don't here, could you explain this to me? (I'm therefore undecided whether this is merely a cosmetic [consistency] issue.)

No, it's intended to use bar->enabled here rather than header->bars_mapped.

It's possible to have header->bars_mapped == true, but bar->enabled == false if memory decoding is enabled, but this BAR specifically has failed to be mapped in the guest p2m, which means dom0 is safe to move it for what Xen cares (ie: it won't mess with p2m mappings because there are none for the BAR).

We could be more strict and use header->bars_mapped, but I don't think there's a need for it.

What about adding a comment with:

Quoted 7 lines

/*
* Xen only cares whether the BAR is mapped into the p2m, so allow BAR
* writes as long as the BAR is not mapped into the p2m.
*/

Otherwise I can switch to using header->bars_mapped if you think that's clearer.

Quoted 7 lines

It's not so much a matter of being clearer, but a matter of consistency:
Why does the same consideration not apply in rom_write()? In fact both uses there are (already before the change) combined with further conditions (checking header->rom_enabled and new_enabled). If the inconsistency is on purpose (and perhaps necessary), I'd like to first understand why that is before deciding what to do about it. A comment like you suggest it _may_ be the route to go.

ROM register is more complex to handle, because the same register that's used to store the address also contains the bit that can trigger whether it's mapped into the guest p2m or not (PCI_ROM_ADDRESS_ENABLE). So ROM BAR writes with the ROM BAR mapped and the PCI_ROM_ADDRESS_ENABLE bit also set in the to be written value will be rejected, because we only allow to first disable the ROM and then change the address (which is likely to not play well with OSes, but so far I haven't been able to test ROM BAR register usage on PVH).

I do think for consistency it would be better to use rom->enabled in the first conditional of rom_write() check, so it would be:

    if ( rom->enabled && new_enabled )
    {
        gprintk(XENLOG_WARNING,
                "%pp: ignored ROM BAR write while mapped\n",
                &pdev->sbdf);
        return;
    }
Quoted 6 lines

So that we also allow changing the address of ROM BARs even with memory decoding and PCI_ROM_ADDRESS_ENABLE as long as the ROM BAR is not mapped in the p2m.

Would you be fine with the comment in the previous email added and rom_write() adjusted as suggested above?

Yes, that would look better to me. The comment then probably also wants duplicating (or pointing at from) here.

Jan

#18 lore raw
In reply to Roger Pau Monne
Quoted 10 lines · Roger Pau Monne

Hello,

This patch series attempts to fix the regressions caused by 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned') and the last patch relaxes the check done when attempting to write to BARs with memory decoding enabled.

I consider all of them bug fixes, albeit the last patch is not fixing a regression (since vPCI code has always behaved this way).

Quoted 8 lines

Thanks, Roger.

Roger Pau Monne (5):
vpci: don't assume that vpci per-device data exists unconditionally vpci/msix: remove from table list on detach
vpci: introduce a local vpci_bar variable to modify_decoding()
pci: do not disable memory decoding for devices
vpci: refuse BAR writes only if the BAR is mapped

Looks like you've lost Henry's release-ack that was given for all of v1 (i.e. only patch 2 isn't covered by it).

Jan

#19 lore raw
Quoted 20 lines · Jan Beulich
Quoted 10 lines · Roger Pau Monne

Hello,

This patch series attempts to fix the regressions caused by 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned') and the last patch relaxes the check done when attempting to write to BARs with memory decoding enabled.

I consider all of them bug fixes, albeit the last patch is not fixing a regression (since vPCI code has always behaved this way).

Quoted 8 lines

Thanks, Roger.

Roger Pau Monne (5):
vpci: don't assume that vpci per-device data exists unconditionally vpci/msix: remove from table list on detach
vpci: introduce a local vpci_bar variable to modify_decoding()
pci: do not disable memory decoding for devices
vpci: refuse BAR writes only if the BAR is mapped

Quoted 2 lines

Looks like you've lost Henry's release-ack that was given for all of v1 (i.e. only patch 2 isn't covered by it).

I was worry about adding it again for the whole series (except patch 2), as I think release-acks are conditional to the time they are given. IOW: a release-ack given for a previous series sent maybe weeks ago shouldn't be carried over because conditions to get changes accepted might be tighter as we progress with the release.

I think Henry would be fine to reassess the suitability of the series once it gets properly Acked.

Thanks, Roger.

#20 lore raw

Hi Roger and Jan,

Quoted 26 lines

-----Original Message-----
From: Roger Pau Monné <[email protected]>
Subject: Re: [PATCH for-4.17 v2 0/5] (v)pci: fixes related to memory decoding handling

Quoted 20 lines · Jan Beulich
Quoted 18 lines · Roger Pau Monne

Hello,

This patch series attempts to fix the regressions caused by 75cc460a1b ('xen/pci: detect when BARs are not suitably positioned') and the last patch relaxes the check done when attempting to write to BARs with memory decoding enabled.

I consider all of them bug fixes, albeit the last patch is not fixing a regression (since vPCI code has always behaved this way).

Thanks, Roger.

Roger Pau Monne (5):
vpci: don't assume that vpci per-device data exists unconditionally vpci/msix: remove from table list on detach
vpci: introduce a local vpci_bar variable to modify_decoding()
pci: do not disable memory decoding for devices
vpci: refuse BAR writes only if the BAR is mapped

Quoted 8 lines
Quoted 2 lines

Looks like you've lost Henry's release-ack that was given for all of v1 (i.e. only patch 2 isn't covered by it).

I was worry about adding it again for the whole series (except patch 2), as I think release-acks are conditional to the time they are given. IOW: a release-ack given for a previous series sent maybe weeks ago shouldn't be carried over because conditions to get changes accepted might be tighter as we progress with the release.

Thanks for being considerate! The release ack still holds.

Quoted 3 lines

I think Henry would be fine to reassess the suitability of the series once it gets properly Acked.

No problem, for the whole series (given that this is a bug fix series)

But a reminder: patch #4 and #5 need review/ack from maintainers.

Kind regards,
Henry

Quoted 2 lines

Thanks, Roger.