support PCIe on mt7986/BPI-R3 (DTS)
Subsystems (2)
PATCH 1/2 arm64: dts: mt7986: add pcie related device nodes
In reply to Frank WunderlichFrom: Sam Shih <[email protected]>
This patch adds PCIe support for MT7986.
---
changes compared to sams original version:
- add clock-names to pcie node
- update clocks to new binding
--- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++ arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 ++++++++++++++++++++ 2 files changed, 68 insertions(+)
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +16 -0
@@ -100,6 +100,15 @@ &mmc0 { non-removable; no-sd; no-sdio; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { status = "okay"; };
@@ -162,6 +171,13 @@ conf-rst { }; }; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + spi_flash_pins: spi-flash-pins { mux { function = "spi";
arch/arm64/boot/dts/mediatek/mt7986a.dtsi +52 -0
64 lines not on this page · raw message
Signature · 1 line
2.34.1
cover support PCIe on mt7986/BPI-R3 (DTS)
From: Frank Wunderlich <[email protected]>
After PCIe binding got reviewed here the last 2 PCIe Patches for adding DTS nodes to mt7986 and bpi-r3.
based on:
rework mtk pcie-gen3 bindings and support mt7986
https://patchwork.kernel.org/project/linux-mediatek/list/?series=688557
Add BananaPi R3
https://patchwork.kernel.org/project/linux-mediatek/list/?series=688984
Frank Wunderlich (1):
arm64: dts: mt7986: add pcie node to BananaPi-R3
Sam Shih (1):
arm64: dts: mt7986: add pcie related device nodes
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 17 ++++++ arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++ arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 +++++++++++++++++++ 3 files changed, 85 insertions(+)
Signature · 1 line
2.34.1
PATCH 2/2 arm64: dts: mt7986: add PCIe nodes to BananaPi-R3
From: Frank Wunderlich <[email protected]>
Add PCIe nodes to Banana Pi R3 SBC which is used on M.2 slot.
--- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi +17 -0
@@ -181,6 +181,16 @@ &i2c0 { status = "okay"; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pio { i2c_pins: i2c-pins { mux {
@@ -247,6 +257,13 @@ conf-rst { }; }; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_pereset"; + }; + }; + spi_flash_pins: spi-flash-pins { mux { function = "spi";
Signature · 1 line
2.34.1