imx: imx8qm: imx8qm_mek switch to binman
Subsystems (3)
PATCH v2 1/1 imx: imx8qm: imx8qm_mek switch to binman
Signed-off-by Oliver Graute <[email protected]>
--- arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++ arch/arm/mach-imx/imx8/Kconfig | 1 + board/freescale/imx8qm_mek/README | 2 +- configs/imx8qm_2ek_defconfig | 2 ++ 4 files changed, 6 insertions(+), 1 deletion(-)
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright 2018, 2021 NXP */ +#include "imx8qm-u-boot.dtsi" + &{/imx8qm-pm} { u-boot,dm-spl;
arch/arm/mach-imx/imx8/Kconfig +1 -0
@@ -68,6 +68,7 @@ config TARGET_GIEDI config TARGET_IMX8QM_MEK bool "Support i.MX8QM MEK board" + select BINMAN select BOARD_LATE_INIT select IMX8QM select FSL_CAAM
board/freescale/imx8qm_mek/README +1 -1
@@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder: Build U-Boot ============ $ make imx8qm_mek_defconfig -$ make flash.bin +$ make Flash the binary into the SD card =================================
configs/imx8qm_mek_defconfig +2 -0
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=3
Signature · 1 line
2.17.1